Temporary STOP data from R/3 to CRM

We have a number of transports waiting to go into production on our BW & CRM systems, but before I can transport these I need to temporary stop the data transfer from R/3 to CRM for about 15 minutes, does anyone know what would be the best way to do this?
thanks in anticipation
Barry

Hi
Actually it is not suggestable but u can stop temporaryly through deactivating the delta download in R3AC4
wait for other friends suggestions
regards
Manohar
Edited by: Manohar R on May 8, 2008 12:48 PM

Similar Messages

Upload data from Excel to Sap-Crm

Hi All,
I need to upload data from EXCEL to SAP-CRM system.The problem is in crm there is no ALSM_EXCEL_INTO_INTERNAL_TABLE or corresponding function modules exist.Using GUI_UPLOAD I can upload data from excel to CRM but the main problem with this is it supports only 255 chars for entire line, in my excel file it contains more than 255 chars.Please help me out.

Try the following :
Class: CL_GUI_FRONTEND_SERVICES
Method: GUI_UPLOAD
Thanks
Allot points if this helps!

Upload data from Excel into SAP CRM using webservices

Hi,
I want to upload the data from EXCEL into SAP CRM using a web service, can anyone say me the process and also how to map the excel and the source code structures.
Thanks,
Sanju.

Try the following :
Class: CL_GUI_FRONTEND_SERVICES
Method: GUI_UPLOAD
Thanks
Allot points if this helps!

Error message in pulling data from R/3 to CRM

Hi,
I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
As far as I know, SAP had an on-going dialog enhancements on this one, is there anyone knows any recent updates from SAP that might solve this problem?
Please help.
Thanks.

Hello,
according to our development this message only should accur in case there are inconsistencies on R/3 side which lead to such errors in inbound processing.
Therefore in case you don't see any inconsistencies I would recommend to address it via OSS message.
Best regards,
Christian

Error in pulling customer master data from R/3 to CRM

Hi,
I am trying to pull customer data from R/3 to CRM with different SHIP-TO partner. In this case, the VAT REG. NO. is different from its country ISO code, so when i try to execute in tcode R3AR2 and R3AR4, I was encountered error message in tcode 'SMW01' saying "ISO CODE <code> IS NOT CORRECT IN THE VAT REGISTRATION NUMBER".
Is there anyone knows any recent updates from SAP that might solve this problem?
Please help.
Thanks.

Hello,
it seems your customizing of ERP and CRM is different in this area.
Please try a new initial load for all the customizing objects which may be responsible:
DNL_CUST_BASIS
DNL_CUST_BASIS2
DNL_CUST_BASIS3
DNL_CUST_BASIS5
DNL_CUST_BASIS6
DNL_CUST_BNKA
DNL_CUST_KTOKD
DNL_CUST_PRC
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_PROD3
DNL_CUST_SPROD
DNL_CUST_TVAST
DNL_CUST_TVFS
DNL_CUST_TVKN
DNL_CUST_TVLS
We do every week a new load of this objects using a background job.
Alternativly you could investigate which customizing object is the correct one and only load this.
After this new load retest your scenario.
Best regards
Manfred

Error while replicating customer master data from R/3 to CRM

Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimal

Hello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c

Uploading data from R/3 to CRM

Hi Gurus,
We have the following scenario:
Our customer master data is created and maintained in R/3. Now we need to create and maintain in CRM.
1. we need to bring R/3 customer to crm and start maintaining only in crm
2. there should not be any number overlap
eg. 1000 customers in r/3 starting no. 1 to 1000, we need to bring this customer to crm and start maintaining in crm. then from cusotomer no. 1001 onwards need to create from crm.
Can anybody help me on the steps to be followed and the configuration settings to be maintained. How the number ranges have to be maintained and what settings should be done in CRM and R/3 before transfering the data.
Also the steps on how to upload data from R/3 to CRM??
Thanks.
Divya Gupta

Hi Divya,
Create 2 different number ranges and groupings and assignement in CRM system
For Ex:
Create a number range(External) with 1 to 1000 and create a grouping ABC and do the assignment(R/3 customers)
Create a number range(Internal) with 1000 to 100000 and create grouping XYZ and do the assignment (New customers)
we need to bring R/3 customer to crm and start maintaining only in crm
Do the following settings in R/3 system to bring the customer data from R3 to CRM
T Code: PIDE
Select R/3->CRM: Assign Account Grp. to BP Classification
Select the Account group which is created in R/3 for customers and set classification as B and select the grouping as ABC(Defined).
and start initial download in CRM system with T.Code R3as
Load Object = CUSTOMER_MAIN
Source Site (Sender) = R/3
Destination Site (Receiver) = CRM
and Execute.
It will bring the customer data from R3 to CRM.
While creating new customers in CRM system select the grouping as XYZ to avoid overlaping.
Regards
Narayana

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizon

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizonstore they will upgrade your data plan to cover the overage and credit the upgrade. You will then have to remember to downgrade your plan or continue to pay for more data. Verizon, how would you feel if I walked into one of your stores and started filling my pockets with merchandise? If cought can I just give the product back and say "oops, sorry"

Today, my FCC complaint hit the same person working on the BBB complaint. Jimmie has been very nice and seems willing to work with this problem. We have been able to come to an agreement. I paid the purchase price for the phone and he returned my upgrade and unlimited data plan. This is what would have occurred if Verizon had given me correct information to begin with. I am happy with this result. He also brought quite a few instances concerning the handling of my transfer and upgrade that did not follow proper procedure. I am also confident that I would not have resolved this without complaining to BBB and or FCC. Verizon had no interest in solving the problem nor did they show any propensity to keeping a 20 year client. Even though this last CSR was very polite and helpful, his sole job is to respond to formal Federal and State complaints. He is required by law to address every complaint and report the reporting agency the agreed upon results - good or bad. Again, I suggest - If you are not getting the proper customer service, complain to someone outside of Verizon. Jimmie had not received any complaints registered with Verizon directly and I still have not had any contact with any other management representative that I was told would call.

How to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?

how to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?
Plz suggest me any BAPI or IDOC for that ..
thanks in Advance .

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

Downloading Master data from R/3 to CRM

Hi all,
Inorder to download Master data from R/3 to CRM, first we need to download all relavent customizing and condition objects, is this is the correct procedure. Pls anyone clarify this.
If we make any changes to the data in R/3 which is already downloaded to CRM, will those changes replicate in CRM, inorder to replicate those changes in CRM what are the necessary things to be done.
please anyone clarify on this
Thanks In advance
Phani Kumar TN

Hi Phani -
You will need to download all the condition and customizing objects which are relavant for the data you are replicating. Else you will get errors.
Ans to 2nd part of your Q - you can do this by doing a delta load.
I have some documents which u may find useful for this. Let me know where I can e-mail that.
Cheers,
Aarthi.

Download data from ECC6.0 to CRM

We want to download data from ECC6.0 to CRM 2.0.
I am facing an error while trying to use Function module 'SMW_CALL_MIDDLEWARE'
to create and post BDOCS in CRM 2.0.
The BDOCs are getting posted successfully. However, function module is updating
only SMO* ( Mapping) tables but not the CRM database tables. Does anyone has any suggestion on this.

I think your corresponding mobile bridge needs to be properly active. That should take care of posting data from CDB to CRM.

Initial Load for Master Data from R/3 to CRM

Hi Middleware Experts,
I have an ambiguity on initial load of enhanced master data from R/3 to CRM. The current situation is
1)I have already enhanced master data on R/3 side with some additional fields. Now shall i go ahead with standard intial load of these Master data to CRM without creating middleware interfaces to map those enhanced fields on CRM side?
2)Also after doing initial load from R/3 to CRM, if I develop middleware interfaces for mapping these new fields of master data and then again do the initial load, so that new fields also get mapped, will the initial load be done properly as i have already done it once? will it overwrite the previous initial load data on CRM side properly?
Please suggest whether it can be done or not and which is the better option.
Regards,
Rahul

Hi Rahul,
Since you have not done the mapping yet the middleware will not bring those fields to CRM it will work just like a standard initial load without considering the enhanced master data field.
When you develop the middleware interface and enhance the CRM data structure also and then you can see the exchange of those fields through MW. You can start the intial load at that time also its not that you can do the initial load just once. But the better option would be that you avoid doing initial load several times because its time consuming activity. You do all the enhancement and then finally perform the initaial load.
Allot points if my post helps!!
Best regards,
Vikash.

Document/customer pricing and replication of pricing data from r/3 to crm

Hi,
can any one tel me how can we replicate the r/3 pricing condition, pricing procedure to crm.
once it is replicated to crm what customization is require in crm.
tel me abt customer and document pricing procedure, how it will be effected in the transactions.
plz any one help me to know this scenarios.
thanks
kumar

Hello Sathish,
Start from here: [Data Transfer from SAP ECC (Download)|http://help.sap.com/saphelp_crm60/helpdata/en/51/62431b7b3511d3ad650000e8a5bd28/content.htm] The help document gives you the steps required. You can also see the [Master Guide |https://service.sap.com/~sapdownload/011000358700001398312008E/MG_CRM2007V2.pdf]or [Customizing Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/B09_BB_ConfigGuide_EN_US.doc] for similar configuration information.
Essentially after you download the pricing related customizing data from ECC into CRM, you have to download the conditions. the standard conditions get downloaded without any issues since the download adapters are defined already. However, for downloading custom conditions in ECC, you have to do further configuration. You have to define the adapter objects and do the initial download of those conditions. Such an information is available in the [Master data and Transaction data Replication Guide|http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/Documentation/C03_BB_ConfigGuide_EN_US.doc].
Easwar Ram
http://www.parxlns.com

Error in SMW01for BP while replicating data from R/3 to CRM

Hi Experts,
While doing initial load for Customers from R/3 to CRM am getting errors as "Customer number already assigned to business partner" in SMW01 error message
Can anyone please help me on this.....
Regards,
Rahul

Hi Rahul
As stated above this will happen in case the number is already assigned to a business partner.
Are you
1. Reconnecting the CRM system to a new R/3 and the CRM system has data from an old system?
2. Has the replication been done before
3. In case this is a new CRM system and numbers are being generated for the first time check the numbering range. (are the CRM numbers for this BP defined as external if R3 is the leading system?) the numbering ranges should not overlap or this will be a common scenario.
Rewards points if this was helpful.

Replication of Customer master data from R/3 to CRM.

Dear Friends,
If i want to replicate customer from R/3 to CRM what are the prerequisites and how to execute a campaign for the replicated BP's(target groups).What is the load object that we use in R3AS.
REgards,
Prabhu.

CUSTOMER_MAIN is the object used to download customers from R/3 to CRM.
For CRM 5.0 you can use the link below:
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
You then need to read the instructions for:
CRM Generation
CRM Connectivity
CRM Customizing Replication
CRM Organization Model
CRM Master and Transaction Data Replication
Those steps will provide on how to setup the middleware for customers.
You then will need the to read the following building blocks for marketing:
CRM Central Master Data
CRM Marketing Master Data
CRM Lean Campaign Management.
Good luck,
Stephen

Temporary STOP data from R/3 to CRM

Similar Messages

Maybe you are looking for