Tengo mac osx lion y quiero intercambiar la letra "y" por la "z", he probado con el ukelele, pero al parecer solo funciona para el snow leopard. gracias de antemano

tengo mac osx lion y quiero intercambiar la letra "y" por la "z", he probado con el ukelele, pero al parecer solo funciona para el snow leopard. gracias de antemano

Buenos dias Federico:
No tengo que disculpar nada, hasta la respuesta mas simple puede ser que a uno no se me ocurriera...
En este caso te comentare que la ruta la tengo bien puesta... y he probado ya con todo...
No me permite ponerle una ruta local con la accion enviar formulario:
- c:\temp\ (por ejemplo) no la reconoce.
- /c/temp/ (ya que es la forma que reader tiene de reconocer rutas, si vale, en JS, pero algo tengo que intentar xD): Tampoco lo permite.
Con esta dinamica he probado todo lo que puedo en ruta de red, emjemplos:
\\servidor\adobe\temps\ - Lo vuelve: http://\\\\servidor\adobe\temps\/
//servidor/adobe/temps/ - Error abriendo destino.
file:servidor\adobe\temps\ - Si, se que el file se aplica a la carpeta donde tienes abierto el pdf, no en la de guardar, pero es que como dije estoy desesperado... Aqui da error.
Tambien he probado a poner la ip en vez de el nombre del host... Nada, no da resultado.
Nadie se le ha planteado este problema? Nadie encontro una solucion? Alguien sabe lo del archivo JS¿?
Un saludo.

Similar Messages

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

I am a new mac user and I switch to mac due to the graphics that it brings. I do website in pc and I heard iweb is the best.NOW i heard that iweb will be discontinue. so what is the best application there for website using MAC OSX lion?

It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
◼ MobileMe Gallery
All of these features can be replaced with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

I am running Mac OSx Lion 10.7.2. My problem is I can't search on an external network server for a file with the finder toolbar anymore. Nothing shows up and it will not search. I was able to in snow-leopard and am no longer able to w. Lion. Suggestions?

I am running Mac OSx Lion 10.7.2.
My issue is that I am not able to run a search in the finder toolabar on a network server. No files show up nor does it search on the server anymore. I was able to run the search in snow-leopard and am no longer able to do so with Lion. Is there a preference I can change or some kind of app or program I can download that will help me with this issue? This is extremely problematic for me as I am searching for files all day everyday. Thank you!

Hello,
It isn't the fw in Network you want o use or look at, that's for something completely different.
My first suspect is the Power Adapter on the LaCie has gone.
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware>Firewire, what is listed there?
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive or devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

Mac OSX Lion v10.7.4 ipod touch isn't showing up in iTunes

I am using a Mac OSX Lion v10.7.4 and my ipod touch isn't showing up in my itunes. I've followed all of the articles' instruction and restated them both a million times and it still hasn't worked. What is there left to try?

have you tried using a different usb port on your computer some are not strong enough, does your cord still charger your phone? if not then maybe its the cord. have you uninstall itunes? ( it has six things to successful unistall it)

Mac OSX Lion Server Network User Login Issue

We have in the office a server running Mac OSX Lion, and several network users who've all been running happily for quite a will.
About a month ago I was added to the system, and initially we had a few issues relating to the home directory, but we changed 'something' and it all worked.
Fast forward to now, and we've added a new user - Hannah - to our system.
I've added her in the Workgroup Manager, and set her up everywhere I can find on the server. Her home directory creates on the server fine.
She appears in the Logon list on the client machines, and here's where the trouble starts...
Every time she tries to log on, it fails. The logon box just bounces or wobbles as though the password is incorrect. We've tried changing the password, to no avail. We've tried adding new test users - same problem.
We've tried sudo kinet on the Terminal as a local user, with variable results.
I'm at my wits end, and really hoping someone here can help offer some suggestions or advice we can work through to get to the bottom of this.
Thanks in advance!

Your problems are likely occurring because you added her to the directory with Workgroup Manager.
You should really start avoiding WGM when at all possible as Apple is clearly moving away from it. Because of this, things don't always work as expected when using 'legacy' tools like WGM.
My guess as to what your problem is: When you create a new user in Server.app, two things happen for you automatically that WILL NOT HAPPEN if done from WGM.
First the user is added to the default "Workgroup" group.
More importantly (and the source of much confusion), the user is automatically added to SACLs.
Check the SACL for the user in Server.app, I bet you'll notice that they aren't a member of the File Sharing group like they should be. To solve this problem, you can either delete the user and recreate them in Server.app, or manually add them to the appropriate SACL.
I would opt for recreating them in Server.app if I were you, as I don't trust user accounts that originate in WGM on Lion Server.

How do I install Mac OSX Lion client on the new Mac Mini Server?

If Apple would have had the quad-core processor option for the non-server Mac Mini, I would have just bought that, but I wanted the quad-core. I do not, however, need the server software. I found this article talking about how to disable the server functionality, but this article highlights how little that method actually does.
Ultimately, I just want to do a clean reinstall like I used to do prior to Lion. This process used to be so easy. Create a disk image of the desired operating system on USB, option boot, and you're done. Now it appears that Apple purposely impedes this process, as every time I boot from the USB I created with Mac OSX Lion client, I get a circle with a line through it. Is there any way around this restriction? Editing firmware, editing .plist files, etc?
Very disappointed that Apple is limiting what used to be such a simple process on Hardware and Software that I paid for but now can't get the functionality I want.

Sorry to be the bearer of bad news, but what I don't think you can do what you're asking for. Closest thing is going to be disabling the server components like it says in the article, but again, that doesn't do much.

Once I installed FF 7.0.1, all websites with Quicktime videos will not play. Each page says I need to install QT. I'm on a Mac, OSX Lion. Everything worked in FF 6.*

I'm using a Mac, OSX Lion. I've been using Firefox for years. Lately I've been using version 6.**, meaning I keep the version up to date as updates come out. Quicktime videos have never been an issue. But, once I installed FF version 7.0.1, websites now tell me I need to install QT. This makes no sense. Worked in FF 6, doesn't work in FF 7. Videos on Apple's website won't play in FF 7.0.1. Says I need to install QT. Makes no sense, QT is part of the OS X Lion install.

I had the same problem with divx also and here is a solution that will work for both first install the firefox add on Add-on Compatibility Reporter that can be found here
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
next restart firefox then install the add on unplug that is found here
https://addons.mozilla.org/en-US/firefox/addon/unplug/
once that is done you might need to make sure that unplug is enabled. if done correctly after its setup you should be able to use the web player you have installed in windows to stream the videos you find on the net.

Do you have a problem connecting to Wi-Fi? (iMac Mid 2011 Model)Mac OSX Lion 10.7.3

Did you just start up or restart your mac recently? If you did you might have experineced a problem with your Wi-Fi. I was unable to access anything that required Wi-Fi. So what I did was I restarted my iMac and my Wi-Fi was working again.
What might have caused the problem
A. The Wi-Fi chip did not start or restart (During the process of Starting or Restarting your iMac)
B. It could be a bug in Mac OSX Lion 10.7.3 or lower.
I hoped this helped you out

If it was previously working then try a smc and pram reset.
If that doesn't fix it then see if vlc can handle the video.

Failed to load preferences error on upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1

Hi Folks,
Since the upgrade of Anyconnect to 3.0.3054 on my MAC OSX LION 10.7.1, i have been getting
failed to load preferences error. During the upgrade the vpn connection get established, but once
i disconnect and try to connect again its starts bombing on "failed to load preferences". For now
i keep uninstalling anyconnect and reinstall an older version which while autoupgrading to 3.0.3054
is able to connect for the first time. Its getting very painful. Any help from the support team will be
appreciated!

I had the same issue and it is due to corrupted preferences.xml file under /opt/cisco/vpn/profile directory. Easy way to fix is uninstall the client and remove the profile directory under /opt/cisco/vpn. Removing the profile directory requires a root access on MAC OS X.

My wordpress home page will not display any active information in Firefox 15 on Mac OSX Lion.

Hey All,
I've tried many things to resolve this issue, but none of them seem to be working. For some time now I have not been able to see the homepage of wordpress.com with full information i.e. stats, notifications, etc. I'm running Firefox 15 on Mac OSX Lion with the following settings and add-ons. I've tried disabling the various privacy add-ons one-by-one to no avail. Please help!

The only active thing I see on that page is the banner near the top which keeps changing: "For the cat pictures", "For the poet", etc. Do you not see that? I did not see any link for "Home". Try these pages:
* http://kb.mozillazine.org/Websites_look_wrong
* http://kb.mozillazine.org/Images_or_animations_do_not_load
Incidentally, it seems to me that you are using Mountain LIon, not Lion. Mac OS 10.8 is Mountain Lion.

Quicktime Plugin Issue in Safari on Mac OSX Lion.

(Strange) Safari - Quicktime - issue on Mac OSX Lion (All Updates done - 20/11/2011)
Strange issue with Safari - Quicktime video playing - on Mac OSX Lion (All updates done till 20th Nov 2011 night)
Problem discovery: Tried to view the Apple iPhone 4S Keynote on Apple Website. Strange that Safari does not display any videos from Apple Website.
Following works OK:- You Tube worked fine.
- Google Chrome worked fine. (It shows the quick time player loading and then displays the video absolutely fine.)
Conclusion: There is some problem with Safari Quicktime Plug-in.
Strange Discovery:
- There are two users on the MAC. Logged in with a general user (Non Admin)
- When tried to view Apple Videos on Safary ... THEY WORKED FINE !!!
- The user where they donot work is an ADMIN User ... Strange !!!
System:
- Mac-Mini 2010 - 8 GB RAM - with OSX Lion fully software updated until 20th Nov 2011 night.
- DIVX is installed and is also a paid version - registered with DIVX website.
- VLC is installed.
- Perian was installed - after problem discovery - uninstalled it - no use.
Please help with a solution if anyone has faced and solved this problem. Sub question is : If DIVX / anyother plug-in causes problems with QuickTime plugin on Safari, why does it affect only one user on the system and not other users on that system ?
Notes:
1) There is a similar looking thread on MacRumors here but concluded that required to start a seperate one with clear problem statement.
2) Apple Forums
(a) One thread on topic that hints that some 3IVX plug-in can cause issues with Safari Quicktime Plugin: here
(b) Another thread from Apple Forum, that hints that DIVX causes problems to Safari Quicktime Plug in, Link is Here

Refer to a thread on Apple Discussions Forum itself, Link is HERE; refer to the posting by "Charles Cole",
Charles Cole
Re: Does anyone recommend OS X Lion?
Aug 2, 2011 8:09 PM (in response to Landrix)
Charles writes about DIVX and QuickTime Plugin conflict in Safari:
One thing I've discovered that might help anyone having a Quicktime Plug-in issue. If you have DivX as a codec on your system (usually installed to play .avi files) you'll want to uninstall it so that Sarfari 5.1 will default to the Quicktime Plug-In and not the DivX plug-in. Otherwise, you can't see Quicktime movies in Safari.
Note: this post is about and at the time of OSX Lions launch, i.e. 10.7.0.
Now we have 10.7.2, still cannot believe Apple has not fixed this bug !!!

New install of CS3 on my new Mac OSX Lion does not start

Good morning,
I have an old Mac running CS3, that was upgraded to Lion afterwards with no difficulty.
I bought a new Mac 27" Mac OSX Lion, when installing CS3 on it, the licence number does not register a green check (horrible red cross instead....) Licence number is valid, legally purchased....
What's wrong here? I can't aford to upgrade just for that reason....
Lisa

Since this is a serial number issue you can't post anywhere, I would do one-on-one chat support for activation:
http://adobe.ly/DI_Install_Activation_Chat
Where did you purchase your copy of Photoshop? My one concern is that the serial #/product was counterfeit:
Protect Yourself From Pirated and Counterfeit Software: http://adobe.ly/qASJDH
If you determine that's the case, let me know and send me an email/private message. jtranber at adobe dot com

Selection printing on mac osx lion safari

How do you print just the selected area on mac osx lion in the safari browser

Hello:
In your utilities folder you will find an application called "grab."
Open it and then look at the help for the application.
Barry

E2000 Parental control tab missing - Mac OSX Lion

I am trying to use the Parental Control feature. I can't use Cisco Connect as there currently isn't an update for this router for Mac OSX Lion
The firmware version in the support site hasn't been updated for ages, and I am running the latest (v 1.0.04)
The Parental control tab, that is supposed to appear in the web browser interface isn't there. It's supposed to be, but doesn't show up.
Any ideas why or what the work around might be?
Thanks

If you want to use the Parental Control Feature then it will be in the name of Access Restriction instead of Parental Control…
Cisco Connect 1.4 comes with the latest Linksys routers. It is compatible with Mac OS X Lion. This has resolved compatibility issues encountered in the past.
Here is the link for the Cisco Connect Software Installation:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=93&login=1&vw=1&app=search&articleid=21463&userrole=Links...

Tengo mac osx lion y quiero intercambiar la letra "y" por la "z", he probado con el ukelele, pero al parecer solo funciona para el snow leopard. gracias de antemano

Similar Messages

Maybe you are looking for