Terminal: could not open a new pseudo-tty
Since I upgraded to Leopard my Terminal started to misbehave. Many times when i open it or a new window or just a new tab, all it displays it the message:
Could not open a new pseudo-tty.
An I cannot type in it or anything. Even if I quit Terminal and try again the error persists.
Funny that this is not happening every day, maybe it's being cause by another app like HamachiX or something.
Does it log the actual error that caused the tty to not open in some log file? Has anybody seen this? I couldn't find any mentions even in google
One more thing, this problem only occurs on my account. When logged in on the guest account, I experience no issues. Just to test this, I also created another administrator account, and I also have not run into this problem.
Thanks Again
Similar Messages
-
Firefox could not open 300 new tab with content loading
Dear All,
Thanks for good support in web browser world.Directly i come to the question.I have excel sheet where it has 300 hyperlinks as given below(example links 3)My Excel macro is written in such a way that this will open all the link in firefox "new tab " one by one.It was perfect and page was loading in previous versions(i could not remember the exact version but i could say an year before when i used firefox it worked well).Now i am having issues opening 300 new tabs with links.It gets started loading the page but before one page loading gets completed too many new links are opening but the page is not fully loaded at all.When i click the tab for each link and see in the browser the green clour processing round sysmbol keeps on rotating.Can you please look into this issue.
If you want i can be contacted through email or if the information is not clear i am ready to connect through web sharing or to have a call.If you want spreadsheet for testing this issue i will send it.
Link Used in Excel sheet example : 300 links in same site with differrent page:
http://chartink.com/stocks/RECLTD.html
http://chartink.com/stocks/bpcl.html
http://chartink.com/stocks/itc.html
Expecting your positive reply at the earliest.Thank you!
Regards,
Marx
<sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>Hi Marx,
With this kind of data testing it is helpful to provide context to the issue you are trying to document. This technical information is very useful to the engineers working on the performance of Firefox and I am sure this is the kind of information they would love to see.
Therefore I would like to put you in touch with this team to see what they can do with this information. Talk to the #perf channel in irc and they should be able to put you in the right direction. I am asking currently and see what I can find. Or in the meantime check out the current tab bugs in the Performance component of bugzilla provided in the search below: [https://bugzilla.mozilla.org/buglist.cgi?quicksearch=tab%20performance&list_id=9361049] -
I recently updated to the OSX 10.8.3 Operating Sistem. I am writing a book and now cannot open any word document I've created with the old system. Could not find a newer version of the Microsoft Word Processing Program. Is Pages the next thing? Can I recover my documents? How?
I'm in the same boat: new to OS X and Mac, and in the middle of a book. I switched because I heard about the the ease of using Mac, but so far, for me, it's been a nightmare. I bought 2011 Office Mac and hate everything about it, the most recent being the inability to open or cut or paste any of my original word files. I understand that this could have easily been done with earlier versions, but not Mountain Lion (which I learned is what OSX is.) Since I work with language, I am amazed at the assumptions of the Apple community. It helps to use common language and explain even the basics.
So all the helpful hints to use the latest version of Office Mac are to no avail. Now what? -
reloaded Photoshop CS5 (New Machine) and now it won't open, get a message "Could not open scratch file because disk is not available", so pS won't go any farther.
If prefs are the same as Settings on a MAC, OK, it would have been more
clear to me if you had said Settings since I didn't see anything related to
prefs. On a PC, I know what you mean, On a MAC, wasn't sure.
In a message dated 4/9/2015 9:13:48 A.M. Eastern Daylight Time,
[email protected] writes:
reloaded Photoshop CS5 (New Machine) and now it won't open, geta message
"Could not open scratch file because disk is not available", so pS won't go
any farther.
created by c.pfaffenbichler
(https://forums.adobe.com/people/c.pfaffenbichler) in Photoshop for Beginners - View the full discussion
(https://forums.adobe.com/message/7421714#7421714) -
Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!
Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling -
Could not open PS CS6 because disk not available - new info
Running PS CS6 on a Mac Pro, Mt. Lion 10.8.1, 10 GB RAM, 3.6 Tb on 4 internal drives. A new problem cropped up just today. Launching PS brings error msg Could not open because a dik was not aviable, and a 2nd msg Could not open a scratch file . . . . Removing Prefs file works, but there's a BUT: I can't change some prefs without the problem reoccurring.
I can reproduce the following: reinstall PS CS6, Change 1 preference, namely make another disk the scratch disk, move it to 1st place. Problem reappears. It appears I must leave the boot disk as the primary scratch disk. All my disks are OK, repaired & permissions verified by Disk Util.
Even if I just clear prefs, verify releaunch is OK, and change this one preference, I get the prob.
FWIW here are the last few lines from the Console log:
9/2/12 3:57:12.000 PM kernel[0]: proc 2934: load code signature error 2 for file "Adobe Photoshop CS6"
9/2/12 3:57:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x100000000): p=2934[Adobe Photoshop ] clearing CS_VALID
9/2/12 3:57:12.000 PM kernel[0]: proc 2936: load code signature error 2 for file "AdobeCrashDaemon"
9/2/12 3:57:13.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x100000000): p=2937[sniffer_gpu] clearing CS_VALID
9/2/12 4:00:28.064 PM WindowServer[116]: _CGXGetWindowOrderingGroup: Operation on a window 0x425 requiring rights 0x5 by caller PhotoshopThe permissions verification (and repair) functions of Disk Utility will not tell you whether a permissions problem is preventing Photoshop from using your non-boot scratch disk. That only checks to see whether directories and files have permissions which match the permissions that they were given at the time of creation or modification by Apple software installer packages.
My primary "scratch disk" is a non-boot volume. Here are the volume's permissions as seen at the bottom of a Finder Get Info window. -
I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/MacBuild/../view/umenu.MacOS.mm.line 1351
I'd search or post here:
http://www.macosxaudio.com/forums/viewforum.php?f=26 -
I recently downloaded acrobat reader dc. After download was complete, I could not open PDF files. Error read "Adobe acrobat reader DC could not open this file because its either not a supported file or the file has been damaged". Any suggestions?
HI davidd92392148,
Is this error occurring for all PDF files that you try to open? There is an issue where all file icons can change to the PDF icon after installation, so is it possible that the files you're trying to open have been affected by this issue (and aren't actually PDF files)? Please see Application, file icons change to Acrobat/Reader icon.
If that document isn't the key, then please tell us more about these files. Where are they stored? Did they open in previous versions of Reader?
Best,
Sara -
InfoSpoke fails with message "Could not open file on application server"
BW Experts,
I created an InfoSpoke that is configured to extract to a flat file. The name of the file is specified using a logical filename. During extraction, the infospoke reports the error message "Could not open file on application server" adnd marks the extraction process as red(failed). I have tried to run the InfoSpoke in background mode and in dialog mode and the same error appears. After i run in dialog mode, i checked SU53 for authorization errors and did not find any. I also tried changing the Logical filename setup in transaction FILE to a more "friendly" directory in which i'm sure i have authorizations (e.g. my UNIX home directory) and im still getting errors.
Can you please share your thoughts on this? Any help will greatly appreciated. I also promise to award points.Hi Nagesh,
Thanks for helping out.
If i configure the InfoSpoke to download to a file using "File Name" option and also check the "Application server" checkbox, the extract works correctly (extraction to the defualt SAP path and filename=infospoke name). If i configure the InfoSpoke to download to the local workstation, the InfoSpoke also works correctly. It's only when i configure it to download to the application server and use the "Logical filename" option, that i encounter a failed extract.
Here are the messages is the Open Hub Monitor:
(red icon) Request No.147515
0 Data Records
Runtime 1 sec.
(red icon)Run No. 1
0 Data Records
Runtime 1 sec.
Messages for Run
Extraction is running RSBO 305
Could not open file on application server RSBO 214
Request 147515 was terminated before extraction RSBO 326
Request 1475151: Error occured RSBO 322
If i clink on the error message, no messages nor clues are displayed. Note, this is a new InfoSpoke that is currently in the dev system.
Please help. -
"Could Not Open the Communication Device" ???
I use a dial up connection. Everytime I try to connect to the internet, after it dials a message box pops up that says "Could Not Open the Communication Device". Has anyone else had this problem? And how do I fix it?
Please help me.I found this in Mac Help:
If you haven't entered your network settings, open Network preferences, choose your modem port (internal or external) from the Show pop-up menu, and enter the settings provided by your ISP, such as the access phone number, your user name, and your password.
You can also use the Network Setup Assistant to help you enter network settings. Click "Assist me" in the Network pane of System Preferences and follow the onscreen instructions.
Also verify that the number you are dialing is correct.
Try this too.
Some ISPs may require a PPP connection terminal script to connect to the Internet using a modem. If it is required, contact your ISP for the terminal script
To use a PPP connection terminal script follow these steps:
In the Finder, navigate to the Library folder on your startup disk.
If the Library folder does not contain a Terminal Scripts folder, you will need to create it. Choose File menu > New Folder, and name the new folder "Terminal Scripts."
Copy the terminal script file from your ISP to the Terminal Scripts folder.
To activate the terminal script, choose Apple menu > System Preferences.
Click Network and choose your modem port (internal or external) from the Show pop-up menu.
Select the PPP tab and click the PPP Options button.
Choose your connection script from the Terminal Script pop-up.
Click OK and then click Apply Now.
If the Terminal Script pop-up menu is dimmed, then the script is not being recognized. Check that the script is valid, and it is installed in the correct location.
-Internet Wiz -
Unable to start Photoshop CS6 - could not open a scratch file because the file is locked (Windows)
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c:\ drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C:\ drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
To get around this issue I first had to give the user that I was logged on with write permissions to the root of the C:\ drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users\Admin\AppData\Roaming\Adobe\Adobe Photoshop CS6\Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users\<your logged in username>\AppData\Roaming\Adobe\Adobe Photoshop CS6\Adobe Photoshop CS6 Settings.
Photoshop and bridge should now start up with no issues.
I hope that this can help others out there as this caused me a great deal of frustration when upgrading to CS6.station_two wrote:
OK, here comes the explanation of what the scratch disk does and why it's optimal to have it on a physically separate internal drive (not partition!) other than your boot drive
I probably shouldn't say anything since it could complicate this thread, but the rules of thumb can be different under special circumstances when SSD is involved.
IF you have a LOT of empty space on your SSD-based system drive, then Photoshop can actually work great with it's scratch setting pointed at the system drive. This is because a) SSD transfers are much faster than spinning hard drives and b) there's no seek time, so simultaneous transfers to/from scratch and swap files aren't devastating to performance, and you can see a net gain because of the increased I/O throughput over what's possible using a separate spinning drive for scratch.
But if you don't have a huge amount of free space (hundreds of GB) on the system SSD, it's definitely better to use a separate drive, as station_two has said.
Also, up to about a year or so ago, you had to try to severely limit write activity to your SSD drive, since you could actually wear them out by repeated high data write activity. That's pretty much a non-issue now with the advent of things like the SandForce in-drive controller that does wear-leveling inside the drive. Modern drives will last 10 years or more in normal typical use, without special consideration.
As it turns out, making a RAID array of SSDs is a great way to boost performance across the board, have bunches of free space, and ensure even the heaviest usage doesn't shorten the drive life. I have done so, creating a 2 TB system drive C: made from 4 SSDs and Photoshop's swap file (and pretty much everything else) pointed to C:. This system flies, and I can barely tell when Photoshop and/or Windows "goes virtual" and starts using its scratch/swap files heavily. I don't even notice Photoshop auto-saves.
Sorry for the SSD diversion.
Back on topic:
Pretty much everyone who's successfully using a computer - Mac and PC users alike - comes to realize after a while that the task of integrating things on their computers and making everything work falls on THEM, not the developers of applications like Adobe. Some applications pose unique challenges, but to think you can just throw up your hands and try to make it someone else's problem when something goes wrong simply isn't a viable strategy. Maybe that's how things should be, but it's not how it is.
For those of you struggling to get Photoshop to run properly, bear in mind that it's on you to get things working. It works for most folks. It could be a configuration or setup choice you've made that may need revisiting, or some kind of restorative activity that you need to do, or even something very minor like clearing your Photoshop preferences, but it may well take your learning new things and doing things you didn't think you'd have to do to get back to where you can edit photos. It's no one's problem but your own.
So let us here on the forum help you - when we say to do something, try it. We're not here to jerk you around; we're users just like you who have already found the ways to make things work, and we'd like to help you do the same.
-Noel -
OAF : Could not open PDF from Self Service Page or Jdeveloper.
Hi Friends,
We are on R12 Applications.
Appreciate any help.
Requirement :
1. Open the PDF from Self Service Page.
Error :
Adobe Reader Could Not Open the PDF because it is either not a supported file type or the file is damaged.
Below is my Controller and AM code
======================
Controller Code
==========
/*===========================================================================+
| Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA |
| All rights reserved. |
+===========================================================================+
| HISTORY |
+===========================================================================*/
package XXX.oracle.apps.ak.xml.webui;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.xml.parser.v2.XMLNode;
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import javax.servlet.ServletOutputStream;
import javax.servlet.http.HttpServletResponse;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.server.OADBTransactionImpl;
import oracle.apps.xdo.XDOException;
import oracle.apps.xdo.oa.schema.server.TemplateHelper;
import oracle.cabo.ui.data.DataObject;
import oracle.jbo.XMLInterface;
* Controller for ...
public class XMLIntegrationCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
public static final int DEPTH = 4;
public static final int APP_ID = 20003;
public static final String APP_NAME = "XBOL";
public static final String TEMPLATE_CODE ="Emp_Template";
public static final int BUFFER_SIZE = 32000;
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModuleImpl am= (OAApplicationModuleImpl)pageContext.getApplicationModule(webBean);
am.invokeMethod("initEmpVO");
am.invokeMethod("getEmpDataXML");
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModuleImpl am= (OAApplicationModuleImpl)pageContext.getApplicationModule(webBean);
String event = pageContext.getParameter("event");
System.out.println("XXX : Event "+event);
if("GenerateReport".equals(event))
// Get the HttpServletResponse object from the PageContext. The report output is written to HttpServletResponse.
DataObject sessionDictionary = (DataObject)pageContext.getNamedDataObject("_SessionParameters");
HttpServletResponse response = (HttpServletResponse)sessionDictionary.selectValue(null,"HttpServletResponse");
try {
ServletOutputStream os = response.getOutputStream();
// Set the Output Report File Name and Content Type
String contentDisposition = "attachment;filename=EmpReport.pdf";
response.setHeader("Content-Disposition",contentDisposition);
response.setContentType("application/PDF");
// Get the Data XML File as the XMLNode
XMLNode xmlNode = (XMLNode) am.invokeMethod("getEmpDataXML");
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
xmlNode.print(outputStream);
ByteArrayInputStream inputStream = new ByteArrayInputStream(outputStream.toByteArray());
ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
//Generate the PDF Report.
TemplateHelper.processTemplate(
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
APP_NAME,
TEMPLATE_CODE,
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
inputStream,
TemplateHelper.OUTPUT_TYPE_PDF,
null,
pdfFile);
// Write the PDF Report to the HttpServletResponse object and flush.
byte[] b = pdfFile.toByteArray();
response.setContentLength(b.length);
os.write(b, 0, b.length);
os.flush();
os.close();
catch(Exception e)
response.setContentType("text/html");
throw new OAException(e.getMessage(), OAException.ERROR);
pageContext.setDocumentRendered(true);
AM CODE
======
package subba.oracle.apps.ak.xml.server;
import java.io.ByteArrayOutputStream;
import oracle.apps.fnd.common.MessageToken;
import oracle.apps.fnd.framework.OAException;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.apps.fnd.framework.test.inputscanner.server.EmpVOImpl;
import oracle.help.common.xml.*;
import oracle.jbo.XMLInterface;
import oracle.xml.parser.v2.XMLDocument;
import oracle.xml.parser.v2.XMLElement;
import oracle.xml.parser.v2.XMLNode;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class testXMLAMImpl extends OAApplicationModuleImpl {
/**This is the default constructor (do not remove)
public testXMLAMImpl() {
/**Sample main for debugging Business Components code using the tester.
public static void main(String[] args) {
launchTester("XXX.oracle.apps.ak.xml.server", /* package name */
"testXMLAMLocal" /* Configuration Name */);
public void initEmpVO()
EmployeeVOImpl vo = getEmployeeVO1();
if(vo == null)
MessageToken errTokens[] = {
new MessageToken("OBJECT_NAME", "EmployeeVO1")
throw new OAException("AK", "FWK_TBX_OBJECT_NOT_FOUND", errTokens);
} else
vo.executeQuery();
public void getEmpDataXML()
try {
ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
OAViewObject vo = (OAViewObject)findViewObject("EmployeeVO1");
((XMLNode) vo.writeXML(4, XMLInterface.XML_OPT_ALL_ROWS)).print(outputStream);
System.out.println(outputStream.toString());
catch(Exception e)
throw new OAException (e.getMessage());
/**Container's getter for EmployeeVO1
public EmployeeVOImpl getEmployeeVO1() {
return (EmployeeVOImpl)findViewObject("EmployeeVO1");
}Try the OA Framework Forum
-
Adobe Reader could not open 'A9R7D1F.tmp'
Greetings~
I have seen others with this issue, but none of their solutions have been able to fix my problem.
When attempting to open a PDF document from a web site, I receive the following error:
"Adobe Reader could not open 'A9R7D1F.tmp' because it is either not a supported file type of because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded)."
This is limited to a specific set of computers. Others within the organization function appropriately. As such, it is not a web server or network problem. Here are the specifics of the offending machine(s): Windows 7, Internet Explorer 8, Adobe Reader 9.3.2. Note that other machines with this same specs function appropriately. I have confirmed there are no differing group policies and all are within the same subnet.
Here is what I have tried. After each item, the browser was closed and/or system rebooted. Everyone of these tests resulted with the same error.
Deleted all history in IE (cookies, temporary files, history, etc.).
Uninstalll Reader, reboot, re-install Reader, reboot.
Saved the PDF to the local desktop and tried to open that way.
Installed an older version of Reader.
Ensured the following Reader settings are selected: Display PDF in Browser, Allow Fast Web View, Allow Speculative Downloading in the background (which match machines that are successful).
Ensure IE browser settings are configured to "Automatically" check for newer versions of stored pages.
Ensure PDF document is smaller than allowable disk space limit within IE.
Can anyone help me with this? I am out of ideas!
Thank you.If you are generating files with anything before %PDF, these files are faulty. It's never been allowed, but Reader used to tolerate it for compatibility with an obscure Mac format.
-
my ipad will not load any pages an after about 10 mins comes up with safari could not open the page because the server stopped responding but iam conected to wifi please help as i have been trying for 2 days now and is doing my head in
Does the iPod connect to other networks OK?
Do other devices now connect and work OK?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am getting multiple authentication prompts when I try to open or create a new .docx or .xslx document from SharePoint 2010.
I tried this on different machines and on different browsers (IE and Firefox) and see the same behavior. I am the site collection administrator. I see the same behavior on other sites also. Other users are also seeing the same behavior.
If I download the document, I can open it without any issues.
The Web Application IIS authentication settings is NTLM and Client Integration is enabled.Hi shankze,
According to your description, my understanding is that you could not open the documents because of the authentications.
Go to IIS, make sure that the Security TokenServiceApplication pool is started.
Please do as the followings, and compare the result:
Add your site to the Trusted Sites Internet Zone.
Go to Internet Options - Security - Highlight the Trusted Sites Check Mark - click on custom level - scroll to the bottom and in the user authentication section select "Automatic logon with current username and password."
Also, you can do via group policy in DC server.
More information, please refer to the link:
http://www.networkadminsecrets.com/2011/08/sharepoint-2010-authentication-prompts.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support
Maybe you are looking for
-
Can anyone save my external hard drive?
Hi all, This is probably the first time ever that I have to ask a question myself. Usually when I have any problems I can find a solution in other people's solved threads. But not this time and I'm really frustrated. If any of you can help me with th
-
Hi all!Well i have connected my macbook pro with hdmi cable to my TV Samsung LED 26 but the screen does fit properly!Is there any solution or i have to run it i a clamshell mode to fit properly!please help me!Thanks!
-
How to reset?"Enter Administrator Password" on Compaq CQ62. System disabled key 75858185
Hello everyone, I have a Compaq CQ62. When I've turned it on, it comes up with the bios screen message "Enter Administrator or Power on Password". I tried a few incorrect attempts and after the third attempt, a message "System disabled - Key 75858185
-
Having difficult nailing down exact problem or cause of seemingly random safari bugs. Text entered into boxes sometimes dissapear and reappear spontainously. Other times images and text appear 'on top of each other'. Ocationally whole chunks of text
-
When I try activating my iMessage or FaceTime it says unable to activate check network settings. One day it just stopped working and I updated to 6.1.2 to try and fix it and now it won't let me activate it at all. Can someone help me?