Terminal Error: Unable to read "/private/etc/cups/cups-files.conf" due to errors.

After finding out that my Kodak ESP C310 printer was no longer printing after installing OS X Yosemite, I tried entering these into the terminal to get the driver working again.
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
sudo launchctl stop org.cups.cupsd
Nothing happened the first time I tried it, so I tried it again with still no luck. Now within seconds of opening the terminal I get this message :
" /private/etc/cups/cups-files.conf"
It pops up every few seconds, so it is practically impossible for me to type anything into the terminal without it popping up right in the middle. I tried the fix from the other discussion on this issue, and that didn't work. also I'm noticing that my printer isn't even added under "printers and scanners" anymore. I tried to re-add it, but I cannot without a driver that functions with 10.10.1
Any suggestions on how I should deal with this?

The permissions and ownership on /private/etc/cups/cups-files.conf should be:
/bin/ls -leO@ /private/etc/cups/cups-files.conf
-rw-r--r-- 1 root _lp compressed 3297 Mar 8 2014 /private/etc/cups/cups-files.conf
See "man cups-files" for the format of the cups-files.conf file
The contents of the /private/etc/cups/cups-files.conf file should look like:
# "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $"
# Sample file/directory/user/group configuration file for the CUPS scheduler.
# See "man cups-files.conf" for a complete description of this file.
# List of events that are considered fatal errors for the scheduler...
#FatalErrors config
# Do we call fsync() after writing configuration or status files?
#SyncOnClose No
# Default user and group for filters/backends/helper programs; this cannot be
# any user or group that resolves to ID 0 for security reasons...
#User _lp
#Group _lp
# Administrator user group, used to match @SYSTEM in cupsd.conf policy rules...
SystemGroup admin
SystemGroupAuthKey system.print.admin
# User that is substituted for unauthenticated (remote) root accesses...
#RemoteRoot remroot
# Do we allow file: device URIs other than to /dev/null?
#FileDevice No
# Permissions for configuration and log files...
#ConfigFilePerm 0644
#LogFilePerm 0644
# Location of the file logging all access to the scheduler; may be the name
# "syslog". If not an absolute path, the value of ServerRoot is used as the
# root directory. Also see the "AccessLogLevel" directive in cupsd.conf.
AccessLog /private/var/log/cups/access_log
# Location of cache files used by the scheduler...
#CacheDir /private/var/spool/cups/cache
# Location of data files used by the scheduler...
#DataDir /usr/share/cups
# Location of the static web content served by the scheduler...
#DocumentRoot /usr/share/doc/cups
# Location of the file logging all messages produced by the scheduler and any
# helper programs; may be the name "syslog". If not an absolute path, the value
# of ServerRoot is used as the root directory. Also see the "LogLevel"
# directive in cupsd.conf.
ErrorLog /private/var/log/cups/error_log
# Location of fonts used by older print filters...
#FontPath /usr/share/cups/fonts
# Location of LPD configuration
#LPDConfigFile launchd:///System/Library/LaunchDaemons/org.cups.cups-lpd.plist
# Location of the file logging all pages printed by the scheduler and any
# helper programs; may be the name "syslog". If not an absolute path, the value
# of ServerRoot is used as the root directory. Also see the "PageLogFormat"
# directive in cupsd.conf.
PageLog /private/var/log/cups/page_log
# Location of the file listing all of the local printers...
#Printcap /Library/Preferences/org.cups.printers.plist
# Format of the Printcap file...
#PrintcapFormat bsd
#PrintcapFormat plist
#PrintcapFormat solaris
# Location of all spool files...
#RequestRoot /private/var/spool/cups
# Location of helper programs...
#ServerBin /usr/libexec/cups
# SSL/TLS certificate for the scheduler...
#ServerCertificate /Library/Keychains/System.keychain
# SSL/TLS private key for the scheduler...
#ServerKey
# Location of other configuration files...
#ServerRoot /private/etc/cups
# Location of Samba configuration file...
#SMBConfigFile
# Location of scheduler state files...
#StateDir /private/etc/cups
# Location of scheduler/helper temporary files. This directory is emptied on
# scheduler startup and cannot be one of the standard (public) temporary
# directory locations for security reasons...
#TempDir /private/var/spool/cups/tmp
# End of "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $".

Similar Messages

Terminal: unable to read "/private/etc/cups/cups-files.conf" due to errors

Terminal is giving me the message above every 10 seconds making it impossible to write any lines without the error message breaking up the line. Any suggestions on how to resolve this issue?

Back up all data.
Select
Shell ▹ New Command
from the Terminal menu bar. Uncheck the box marked
Run command inside a shell
if checked.
Copy and paste the following line into the text box that opens, then press return:
mkdir disabled_shell_files
Close the Terminal window that opens. Repeat with this line:
mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files
Your old shell initialization and history files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It's normal that some of these files will not exist, and therefore you will get some "no such file" errors.
Close the window, open a new one, and test.

External USB boot: "fs error - unable to read inode" occurs eventually

[ISSUE: on ONE PC only: ALL external USB drives eventually give console readout like: "fs error - unable to read inode" - endlessly , and no longer accessible.]
I am BOOTING off of the drives in question [ext2 formatted] which may be a large part of it though perhaps not.
PC spec:
- Older motherboard ASUS p4pe.
- has USB 2 though probably a bit iffy.
- Does NOT boot from USB so using the briilliant PloP bootmanager on CD to achieve external USB boot.
Of interest was comments found about the : the ehci_hcd module
which seems very likely that the motherboard I'm having problems with is because of the USB implimentation and this.
REALLY could use a fix for this one. At least, I need to understand what's happening.
OR:
I found this on the Ubuntu forum and was hoping it would be the FIX and that I could get a comment about how to try on my beloved ARCH systems.
------------ Script TEXT from forum over at ubuntu -----------
http://ubuntuforums.org/showthread.php?t=452246
The POSTER there replied saying the following:
problem: USB disk change to read only
Hi,
I solved this 7-8 months ago and haven't had any problems since.
Create a executable file for example /usb/bin/usbhdfix and place the following in it.
Code:
#!/bin/bash
echo 1024 > /sys/block/$1/device/max_sectors
echo 1 > /sys/block/$1/device/scsi_disk:*/allow_restart
1024 works for me but I've also heard about people going lower than default with good results.
I have a Seagate FreeAgent which also have the problem with restarting after spinning down so solution for that is added as well.
Then create a udev-rule.
Code:
# /etc/udev/rules.d/50-fix_usb_hd.rules
SUBSYSTEMS=="scsi", ATTRS{vendor}=="Seagate", ATTRS{model}=="FreeAgentDesktop", RUN+="/usr/bin/usbhdfix %k"
================== BUNCH of LINKS that seemed possibly relevant ==========
https://bugs.launchpad.net/ubuntu/+sour … +bug/88746
http://ubuntuforums.org/showthread.php?t=452246
http://ubuntuforums.org/showthread.php?t=991613
http://bbs.archlinux.org/viewtopic.php?id=63126
http://bbs.archlinux.org/viewtopic.php?id=53822
Last edited by yvonney (2009-03-29 20:11:19)

Sirrah wrote:How do I manually mount a drive that automounts?
As root:
ntfs-3g /dev/sdX /mnt/mountpoint
or
mount -t ntfs-3g /dev/sdX /mnt/mountpoint
http://wiki.archlinux.org/index.php/NTFS_Write_Support
You can also pass other options to mount: (in this example drive is ext3)
mount -t ext3 -o user,rw,async /dev/sdX /mnt/mountpoint
check man mount for all the details.

Error: Unable to read footer file

Hoping someone out there can help me. I get this error on
everypage in my site and have no idea how to stop it.
Error: Unable to read footer file
The error does not show up when I preview inside dreamweaver
but only rears its ugly head after I post the site up on the
internet. I have searched for hours through the Dreamweaver menus
and can not find these elusive footers and have no idea where they
are coming from or what footer file it is trying to read.. Please
help. This probably has a simple solution and I am just not able to
understand it. Thank you.

sdrouillard wrote:
> This probably has a simple solution and I am just not
able to understand
> it.
Possibly, but without a URL we can't comment. Post it, and
we'll see.
At a guess, sounds like an include file is missing. Are you
on some sort of
free hosting plan where the host puts some adverts in the
footer? If that
file is removed from your site directory you might get the
error you've
mentioned (at least, that was the case on the only other time
I've seen this
error)
Regards,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing

Frm-40502: oracle error: unable to read list of values

Hi All,
I am personalizing the assignment form, where we need to restrict the JOB LOV based on Organization value.
In Forms Personalization we are creating the record group from query and attaching to Job field.
The query is,
SELECT DISTINCT j.NAME, DECODE (1, 2, 1, NULL) c_valid_job_flag,
j.job_id job_id
FROM per_jobs_v j
WHERE j.business_group_id + 0 = :CTL_GLOBALS.BUSINESS_GROUP_ID
AND j.date_from <= :CTL_GLOBALS.SESSION_DATE
AND ( (j.date_to IS NULL)
OR (j.date_to >= :CTL_GLOBALS.SESSION_DATE)
ORDER BY j.NAME
When we use this query, we are getting the error "frm-40502: oracle error: unable to read list of values"
If i replace the bind variable with values we are not getting the error and its working fine.
Replace query:
SELECT DISTINCT j.NAME, DECODE (1, 2, 1, NULL) c_valid_job_flag,
j.job_id job_id
FROM per_jobs_v j
WHERE j.business_group_id + 0 = 202
AND j.date_from <= TRUNC(SYSDATE)
AND ( (j.date_to IS NULL)
OR (j.date_to >= TRUNC(SYSDATE))
ORDER BY j.NAME
how to use bind variables (Block.field) here? We are getting this error only when using the bind variable in the query.
Please share your ideas.
Thanks.

Hi;
What is your EBS version? There are 96 docs avaliable about similar error message. I suggest use metalink for your issue
You can also check:
FRM-40502: Oracle Error: Unable To Read List Of Values [ID 1161404.1]
Frm-40502: Oracle Error: Unable To Read List Of Values. [ID 351931.1]
FRM 40502: Oracle Error:Unable to Read List of Values [ID 179162.1]
Regard
Helios

Forms Personalization - FRM-40502: ORACLE error: unable to read list of val

Hi,
I am using Forms Personalization to create an LOV using builtin. In the Builtin, I have put the sql query under create record group from query. In the query, when I hardcode a value, in a where condition, the LOV works fine but when I replace the hardcoded value with :block.field value, it gives the error, FRM-40502: ORACLE error: unable to read list of values. Below is the part of the sql query where I am facing this issue.
"WHERE related_customer_id = :ORDER.INVOICE_TO_CUSTOMER_ID"
Please get back to me if anyone has faced similar problem.
Thanks all in advance,
Regards,
AN

Please post a new thread for each issue. Tacking onto a 2 year old post is generally a bad idea.
Forms personalization is a feature in Oracle E+Biz Suite and as such you should post your question in this forum:
OA Framework

Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)

Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)
What can I do?

Run the cleaner tool and install from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

B2B RosettaNet incoming messages throws error "Unable to read the preamble"

Hi,
We have configured Oracle B2B to send Invoices to TP using Rosettanet V2.0.
The incoming message are coming to B2B server via DMZ running apache HTTP server. We have security certificates installed on DMZ and has shared the public key with the TP.
TP has shared public key which we have installed on SOA server keystore.
We are able to see incoming messages in "Wire Message" tab, but the status is "processing". The SOA log file shows the error "Unable to read the preamble".
Any suggestion on this really appreciated.
Thanks,
Adarsh

The configuration that we have here is -
Outbound
SOA -> <Firewall> TP
Inbound
TP -> DMZ(SSL Enabled) -> FIREWALL -> SOA Server
SOA server is SSL enabled too, but the communication between DMZ and SOA has been configured on HTTP (non SSL). We shared the public key of DMZ server with the TP.
Here is the message that we are receiving from TP.
--27888100.1321681003096.JavaMail.webmethods@exshaw
Message-ID: <14801385.1321681003095.JavaMail.webmethods@exshaw>
Mime-Version: 1.0
Content-Type: multipart/related; type="application/xml";
boundary="----=_Part_6149_9357410.1321681003080"
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Preamble
Content-ID: <16966956.1321681003078.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE Preamble SYSTEM "Preamble_MS_V02_00.dtd">
<Preamble>
<standardName>
<GlobalAdministeringAuthorityCode>RosettaNet</GlobalAdministeringAuthorityCode>
</standardName>
<standardVersion>
<VersionIdentifier>V02.00</VersionIdentifier>
</standardVersion>
</Preamble>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Delivery-Header
Content-ID: <18073579.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE DeliveryHeader SYSTEM "DeliveryHeader_MS_V02_00.dtd">
<DeliveryHeader>
<isSecureTransportRequired>
<AffirmationIndicator>Yes</AffirmationIndicator>
</isSecureTransportRequired>
<messageDateTime>
<DateTimeStamp>20111118T223643.053Z</DateTimeStamp>
</messageDateTime>
<messageReceiverIdentification>
<PartnerIdentification>
<domain>
<FreeFormText xml:lang="EN">DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>616252495</GlobalBusinessIdentifier>
</PartnerIdentification>
</messageReceiverIdentification>
<messageSenderIdentification>
<PartnerIdentification>
<domain>
<FreeFormText xml:lang="EN">DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>200103377</GlobalBusinessIdentifier>
<locationID>
<Value>Calgary</Value>
</locationID>
</PartnerIdentification>
</messageSenderIdentification>
<messageTrackingID>
<InstanceIdentifier>ac1aab8df70da53a000ca325</InstanceIdentifier>
</messageTrackingID>
</DeliveryHeader>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Service-Header
Content-ID: <27927869.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE ServiceHeader SYSTEM "ServiceHeader_MS_V02_00.dtd">
<ServiceHeader>
<ProcessControl>
<ActivityControl>
<BusinessActivityIdentifier>Invoice Notification</BusinessActivityIdentifier>
<MessageControl>
<fromRole>
<GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>
</fromRole>
<fromService>
<GlobalBusinessServiceCode>Buyer Service</GlobalBusinessServiceCode>
</fromService>
<inReplyTo>
<ActionControl>
<ActionIdentity>
<GlobalBusinessActionCode>Invoice Notification</GlobalBusinessActionCode>
<messageStandard>
<FreeFormText>PIDX</FreeFormText>
</messageStandard>
<standardVersion>
<VersionIdentifier>1.0</VersionIdentifier>
</standardVersion>
</ActionIdentity>
<messageTrackingID>
<InstanceIdentifier>33323237303737323338343533343832</InstanceIdentifier>
</messageTrackingID>
</ActionControl>
</inReplyTo>
<Manifest>
<numberOfAttachments>
<CountableAmount>0</CountableAmount>
</numberOfAttachments>
<ServiceContentControl>
<SignalIdentity>
<GlobalBusinessSignalCode>Exception</GlobalBusinessSignalCode>
<VersionIdentifier>V02.00</VersionIdentifier>
</SignalIdentity>
</ServiceContentControl>
</Manifest>
<toRole>
<GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>
</toRole>
<toService>
<GlobalBusinessServiceCode>Seller Service</GlobalBusinessServiceCode>
</toService>
</MessageControl>
</ActivityControl>
<GlobalUsageCode>Test</GlobalUsageCode>
<pipCode>
<GlobalProcessIndicatorCode>P21</GlobalProcessIndicatorCode>
</pipCode>
<pipInstanceId>
<InstanceIdentifier>PIPAC11165C133BA538E8A0000018B17B6C</InstanceIdentifier>
</pipInstanceId>
<pipVersion>
<VersionIdentifier>1.0</VersionIdentifier>
</pipVersion>
<KnownInitiatingPartner>
<PartnerIdentification>
<domain>
<FreeFormText>DUNS</FreeFormText>
</domain>
<GlobalBusinessIdentifier>616252495</GlobalBusinessIdentifier>
</PartnerIdentification>
</KnownInitiatingPartner>
</ProcessControl>
</ServiceHeader>
------=_Part_6149_9357410.1321681003080
Content-Type: Application/XML
Content-Transfer-Encoding: binary
Content-Location: RN-Service-Content
Content-ID: <24309402.1321681003079.JavaMail.webmethods@exshaw>
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE Exception SYSTEM "Exception_MS_V02_00.dtd">
<Exception>
<ExceptionDescription>
<errorClassification>
<GlobalMessageExceptionCode>PRF.ACTN.GENERR</GlobalMessageExceptionCode>
</errorClassification>
<errorDescription>
<FreeFormText>Errors: The Invoice Number entered already exists.; Warnings: Using default Supplier Site., Using default Supplier Group., Using default Supplier User., Units has been truncated.</FreeFormText>
</errorDescription>
<offendingMessageComponent>
<GlobalMessageComponentCode>ServiceContent</GlobalMessageComponentCode>
</offendingMessageComponent>
</ExceptionDescription>
<GlobalExceptionTypeCode>Receipt Acknowledgment Exception</GlobalExceptionTypeCode>
</Exception>
------=_Part_6149_9357410.1321681003080--
--27888100.1321681003096.JavaMail.webmethods@exshaw--

Help! Content generation error. [Error: Unable to read JPEG.]

Hey all -
Havben't seen this one in the forums. I'm importing an article into an existing folio. The processing status bar goes to the end, but before upload starts, I get this error:
Content generation error.
[Error: Unable to read JPEG.]
Any idea how to troubleshoot this? I'm up against a hard deadline and really need to get this worked out. Thanks!

In that case it would be good, if the error message could be more specific; i.e. telling the name(s) of the JPEG images.
However, you could check all placed JPEG images, if they can be opened with PhotoShop.
Uwe

IDOC type abc contains error (Unable to read segments)

Hi All
While importing IDOC in IR i am getting error "IDOC type abc contains error (Unable to read segments)".
We have added one extra field into our existing customised IDOC into R3 and successfully releases. Previous IDOC having version 640 and modified IDOC having version 700.
In IDX2 i have successfully imported IDOC metadata and one extra added field also i can see there. But while importing into IR its showing me error "IDOC type abc contains error (Unable to read segments)".
I have tried to import different IDOC using same user and it was successfully imported means there is no authorization error.
Please suggest me where could be the problem?
Regards
Dheeraj Kumar

Do The following:
1) Delete the IDX2 entry and try to reimport once again....and in the IR also do the same.
2) Have a look into this SAP Note- 742093
3) Check the IDX1 entry , RFC destination entry... may be not pointing correctly.
4) If any field which is mandatory in the idoc must not be disabled...take care about it.

Yaourt error - unable to read pkgbuild

Hi,
Trying to install any package from AUR using yaourt -S <pkgname> I get an error "Unable to read PKGBUILD for <pkgname>"
I have no clue how to troubleshoot this. I can edit the PKGBUILD OK. This has happened on every AUR package I have tried and only started yesterday. Here is the problem
$ yaourt -S powernowd
==> Downloading powernowd PKGBUILD from AUR...
bsdtar: Removing leading '/' from member name
x .
x PKGBUILD
x powernowd.rc.d
x powernowd.conf.d
First Submitted: Wed, 12 Dec 2007 04:39:19 +0000
powernowd 1.00-1 : Program for powering down CPUs dynamicly
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
Unable to read PKGBUILD for powernowd
==> WARNING: Following packages have not been installed:
powernowd
and here is yaourtrc
# yaourtrc - Configuration for yaourt
# See yaourtrc(5) for more information
ABS_REPO=(testing core extra community-testing community gnome-unstable kde-unstable)
#NOCONFIRM=0
#FORCE=0
#AUTOSAVEBACKUPFILE=0
#FORCEENGLISH=0
#EDITFILES=1
#AURCOMMENT=1
#DEVELBUILDDIR="/var/abs/local/yaourtbuild/"
#DEVEL=0
#NOENTER=1
#AURUPGRADE=0
#AURVOTE=1
#AURSEARCH=1
#TERMINALTITLE=1
#EXPORTDIR=""
#TMPDIR="/tmp"
#MAXCOMMENTS=5
#EDITOR="$EDITOR"
#PACMANBIN="/usr/bin/pacman"
#COLORMODE="normal"
#SHOWORPHANS=1
#DIFFEDITCMD="vimdiff"
#DETAILUPGRADE=1
thanks for any pointers

syne wrote:
Had the exact same problem. I suggest you reinstall your pacman, or if you have pacman-git, then replace it with regular pacman. That did it for me. I will try building git once more to see if it that as well would solve the problem.
Hope it helps.
This makes no sense. It's not makepkg that's failing -- It's yaourt. Use makepkg on its own. Submit a bug report to the yaourt maintainer.

IDOC / Integration Builder -- contains errors (unable to read segments)

HELLO,
I have a problem. I have created a new IDOC. but when I imported to the KIntegration Builder it says:
Import started...
ZHRMD_IT.ZHRMD_IT: Error
+ Error: IDoc type ZHRMD_IT contains errors (unable to read segments)
Import failed with 1 error.
The rare thing is that the idoc is a copy of another idoc of SAP (HRMD_A06) but I have taken out some E1Pxxxxx.
Its like a reduced Idoc but as a new idoc.
Can Someone help me, please.
How can I see what segment is wrong in the new idoc (ZHRMD_IT)?
Thank you
Pablo Mortera.

Hi,
As per the error , you are importing some custom idocs.
Go to WE30 and check that, all the segments in the idoc has got released or not ..
<i>All the segments are the sap stardard segments.</i>
>>You may be using standrad segments, but in custom idocs right.Anyway check, idoc and its segments are released or not..
Then start importing the idoc into IR..
Regards,
Moorthy

ORA-27047: unable to read the header block of file

My Windows 2003 crashed which was running Oracle XE.
I installed Oracle XE on Windows XP on another machine.
I coped my D:\oracle\XE10g\oradata folder of Win2003 to the same location in WinXP machine.
When I start the database in WinXP using SQLPLUS i get the following message
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 62918580 bytes
Database Buffers 79691776 bytes
Redo Buffers 2904064 bytes
ORA-00205: error in identifying control file, check alert log for more info
I my D:\oracle\XE10g\app\oracle\admin\XE\bdump\alert_xe I found following errors
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Wed Apr 25 18:38:36 2007
ALTER DATABASE MOUNT
Wed Apr 25 18:38:36 2007
ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
ORA-27047: unable to read the header block of file
OSD-04001: invalid logical block size (OS 2800189884)
Wed Apr 25 18:38:36 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
ORA-27047: unable to read the header block of file
OSD-04001: invalid logical block size (OS 2800189884)
Please help.
Regards,
Zulqarnain

Try to install win 2003 server software, do the fresh installation of oracle software, now copy the datafiles and controlfiles to same locations as you did on winxp.
get back to us, if still not out of the woods. I still doubt that a simple restore would do the trick, since you doing it across different platforms, might be I can be wrong, but this is what I personally feel, you not able to start the database on winxp.
hare krishna
Alok

FCS "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."

I would really appreciate some advice re: FInal Cut Server search errors.
FCS has been running well with our Linux based raid Editshare for 4 years, notwithstanding the recent Mac OS Java security issues.
Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
OS 10.6.x updates, ancient I know.
FCS is still searchable for most of our offliners, audio, gfx and onliner machines running 10.7+, but in some cases, searching FCS assets results in "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
Initially assuming the OS and/or data drives on the FCS machine were failing, I ran disk utility's repair, verify. time machine, and cloned the database drive. I'll clone the OS drive tomorrow, but after checking the forums tonight and seeing similar error messages I'm not so sure it a degraded drive issue.
Thanks in advance, any ideas appreciated!
cheers,
aaron,
Aaron Mooney,
Post Production Supervisor, epn.tv
Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.

I would really appreciate some advice re: recent FCS search errors.
We're having similar issues to C.P.CGN's 2 year old post, it's only developed for us in the last few weeks.
Our FCS machine is running 10.6.8 mac os and 1.5.2 final cut server with the latest
OS 10.6.x updates.
FCS is still usable for 6 of 8 offliners, but on some machines, searching assets presents "ERROR: could not read block 74012 of relation1663/16385/16576: Input/output error."
Assuming the OS and/or data drives on the FCS machine were failing, I cloned the database drive today and will clone the OS drive tomorrow night, but after searching the forums and seeing similar error messages I'm not so sure.
FCS has been running fine for last 4 years, minus the recent Java security issues.
Thanks in advance, any ideas appreciated!
cheers,
Aaron Mooney,
Post Production Supervisor.
Electric Playground Daily, Reviews On The Run Daily, Greedy Docs.
epn.tv

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

We are using the Azure server for our web services. Server is generating an error "Unable to connect to the remote server". What is this error means

Hello,
Did you means that you use the Windows Azure Virtual Machine DNS name as the server name in the Reporting Server Web Services URL?
For example:
Report server:http://uebi.cloudapp.net/reportserver
Report manager:http://uebi.cloudapp.net/reports
If you want to connect to Report Manager on the virtual machine from a remote computer, you should create a virtual machine TCP Endpoint and open the port in the virtual machine’s firewall. By default, the report server listens for HTTP requests
on port 80.
Reference:http://msdn.microsoft.com/en-us/library/jj992719.aspx#bkmk_ssrs_connect_2_remote_RM
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Terminal Error: Unable to read "/private/etc/cups/cups-files.conf" due to errors.

Similar Messages

Maybe you are looking for