Terminal error user not in sudoers list? Can this list be edited?
I've been trying to unlock a HD on my Mac Pro. I had successfully achieved this for an external HD using Terminal on a different Mac. My Mac Pro initially would not launched Terminal and displayed the error "The Administrator has set your shell to an illegal value. I repaired that by copying /ext/shells~orig over /ext/shells, which was empty. I can launch terminal now, but when trying to use a sudo command, I'm told my userid is not in the sudoers list? I would like to know if anyone can give me specific instructions for fixing or editing the sudoers list so that I can unlock my internal HD and change permissions via Terminal.
Restart the computer with the Command and S keys held down, enter 'mount -uw /' without the quote marks, and then use the visudo command to add your account and the admin group to the list.
(50963)
Similar Messages
-
Error message "Not Well Formed." Can this be repaired?
Help!
I have been attempting to open an InCopy (CS6) file, but it will not open. Instead, I get this error message:
"Not Well Formed"
Is there any way to repair this file? It was checked in and saved normally. If it cannot be repaired, I will lose about 1 month's worth of work because my backup has failed. I would appreciate any guidanceFirefox has no built-in email features, if you are using Firefox to access your email it will be a web based email service and email features will be part of the email service. You will need to check with the support for the email service for how to do this.
If this questions is about Thunderbird, for Thunderbird support you can ask in one of these forums:
* http://forums.mozillazine.org/viewforum.php?f=39
* http://getsatisfaction.com/mozilla_messaging -
What's going on with iCloud (MobileMe)? I'm able to sign in here, but I can't access mail on my Macbook Pro, iPhone, or work computer. I always get an authorization error (user-id or passwork wrong). This has been going on for almost a week now.
The single download means that you won't be able to redownload it from the store without paying, either on a computer's iTunes or an iOS device - it doesn't stop you from copying the audiobook to your other computers or syncing it to your iOS devices, you just can't redownload it. (I believe that they are all supplied to Apple by audible.com, so I assume that it's them requiring the one-time download.)
You can download audiobooks on your computer's iTunes and sync them to iOS devices, you do not have to buy them directly on the device (if you do then you can copy them back to your computer's iTunes library by connecting the device and using the File > Devices > Transfer Purchases menu option on your computer's iTunes).
What you are doing to sync them should work i.e.
- connecting the iPad to your Mac
- selecting the iPad on your Mac's iTunes
- selecting its Books tab and selecting the audiobooks that you want to sync to the iPad and syncing/applying that selection.
You should then get an audiobooks option in the Music app on your iPad. If they aren't appearing there then do they show in Settings > General > Usage > Music on the device - if you have audiobooks on the iPad then they should be listed there under an 'audiobooks' heading.
By 'restart the iPad' do you mean a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing its Music app via the iPad's taskbar : Force an app to close in iOS.
And do a soft-reset and retry syncing.
I assume that music and other items sync ok ? -
iTunes randomly stops playing purchases that have previously viewed on the same hardware. It has an error message about HD. How can this issue be resolved? What information is available besides the "learn more" option that does not deal with the problem?
Many people have the same problem. However, there is little or nothing readily available to users. This problem has existed for two or more years. Does anyone have anything to offer about this disturbing problem?Thanks for the suggestion kcell. I've tried both versions
9.0.115 and 9.0.124 and both fail with the policy permission error.
I also tried with and without your crossdomain.xml file but
with the same result. It looks like this file is intended for URL
policy, instead of socket policy. Recently Adobe separated the two.
When I run with the files installed on my dev PC, it does
work, which makes sense because the flash player isn't loaded from
an unknown domain.
I did get one step closer. If a crossdomain.xml in the server
root exists and the socketpolicy file is loaded from the app folder
then the first two warnings disappear. The logs now show:
OK: Root-level SWF loaded:
https://192.168.2.5/trunk/myapp.swf
OK: Policy file accepted: https://192.168.2.5/crossdomain.xml
OK: Policy file accepted:
https://192.168.2.5/trunk/socketpolicy.xml
Warning: Timeout on xmlsocket://192.168.2.5:843 (at 3
seconds) while waiting for socket policy file. This should not
cause any problems, but see
http://www.adobe.com/go/strict_policy_files
for an explanation.
Warning: [strict] Ignoring policy file with incorrect syntax:
xmlsocket://192.168.2.5:993
Error: Request for resource at xmlsocket://192.168.2.5:993 by
requestor from https://192.168.2.5/trunk/myapp.swf is denied due to
lack of policy file permissions.
Which basically says, everything is okay, but you stay out
anyway.
PS: I found the XML schema files here:
http://www.adobe.com/devnet/flashplayer/articles/fplayer9_security_02.html
and the socket policy schema:
http://www.adobe.com/xml/schemas/PolicyFileSocket.xsd.
UPDATE: When serving up the policy file on port 843 using the
example perl script then the socket connection seems to be accepted
and the connect succeeds. After that flex hangs trying to logon to
the IMAP server. -
Internal Error - User not authorized to use the gross profit module
We have a client who has a limited logistics license and just recently moved to 8.8. in the past he could deliver directly from a pick list but now he is getting an error "User not authorized to use the gross profit module". Is this something related to an authorization setting? Before the move this task was not an issue. Please advise.
Thank you.
ReneHi Gordon, one of our user just experienced the same problem in sales order.
In Form Settings he ticked "Display BP Catalog Number", and while he entered the catalog number he got the same error message.
I'm not sure what this has to do with the gross profit base method...maybe the fields "Gross profit" and "Gross profit base price"? Don't know where to set them up.
Thanks. -
System error - User not authorized to access requested Info Object!
Hi, Experts,
I have a user ID begin with S***, but when I click some links, the following message shows:
"System error - User not authorized to access requested Info Object!"
How could I have authorization to see these links?
Thanks!
LorrieHi Lorrie,
If you are a superuser, you should not get this error.
If not, you can not change any autohorizations.
Check it out. For your job, you have to be a super user.
Thanks,
Gordon -
Before iOS 7 I had previous ringtones I made from songs I purchased. Now they will not download to updated version. Says error... Why? Can this be fixed? I want my music ringtones back.
Hi there.
Thank you very much for your quick reply, it's really appreciated.
No need to apologize, I actually found the phrase "If your iPad ever craps the bed" amusing under the circumstances
I checked the list of installed apps like you suggested (Settings>General>Usage>Storage>Show all apps) but this problem app is not in the list. I have also swiped down on the home screen to search for it, but again it does not show.
While it has not let me download the app (and I just tried it again) it has helped me to eliminate a few things from the list of what to try, and I can definitely conclude that it has not downloaded.
I guess I need to fire up my PC and download it / sync my iPad.
Thanks again for your help -
TTS - Internal error User not found error
DB version:10.2.0.4
OS - AIX6.1
Could someone let me know how to resolve this error?. I'm running an export of metadata for TTS using the command below. The TTS export is working fine on other tablespaces of the same database.
I'm running export with "/ as sysdba".
expdp DUMPFILE=<>.dmp DIRECTORY=xtts_dir logfile=<>.log TRANSPORT_TABLESPACES=TBSP1,TBSP2,TBSP3 transport_full_check=y
ORA-39123: Data Pump transportable tablespace job aborted
ORA-29336: Internal error [user not found] [48] from DBMS_PLUGTS
Job "SYS"."SYS_EXPORT_TRANSPORTABLE_06" stopped due to fatal errorIt seems my issue is due to the streams admin user. The streams replication was setup on the objects under these tablespaces. The streams replication was removed and strmadmin user is also dropped. I have enabled trace and got the below message in the trace file. Does any of you face the same issue?.
ORA-39123: Data Pump transportable tablespace job aborted
ORA-29336: Internal error [user not found] [48] from DBMS_PLUGTS
Streams : knlcfdrl
error 604 while looking up the Streams tables.
kwqaadqrs: error 39119 during add rule Here is the command used for removing streams.
execute DBMS_STREAMS_ADM.REMOVE_STREAMS_CONFIGURATION(); -
The buttons to my old iPod nano 1st or 2nd gen (I don't remember) do not respond/work. Can this be fixed??
The Sad face icon is usually a very good indication of a hardware malfunction or failure usually with the iPod's Hard Drive, which would also explain the loud clicking noise you are hearing.
I assume you have seen this article yet?
iPod display's a sad iPod icon
If you are up for the challenge, you can also try all of the troubleshooting mentioned described by another forum member Mitch 751.
https://discussions.apple.com/thread/1193481?start=0&tstart=0
B-rock -
I have an iMAC from about 2007. The mouse will not scroll down. Can this be fixed?
You have to remember, where the scroll ball is, there is a small gap which picks up dust and fluff. That detritus gets everywhere and in your case affects the downward scroll.
Adding just a touch Linc Davis's suggestion, after you have vigorously rubbed the scroll ball on the pad, tap it on a hard surface from time to time. Sometimes you will see small amounts of fluff appear. You should also see dirty marks on the pad. -
I am working on a video project in After Effects CS4 (with Trapcode Particular preset) that's 2:12 minutes long on a Windows 7 operating
system. I'm finished editing for the most part, but everytime I put the video in Render Queue it renders the video for a few seconds (sometimes minutes) and then stops with this message appearing: "After Effects logged one error: AEGP Plugin Media IO Plugin: MediaIO2 error: 0x4 not enough memory to complete this encoding (5027::12)". After I closed this message I checked the part of the video that did render was where I saved it to be as a normal file on my Desktop. I made this video with 2 compositions: 1 for the actual importing and editing and the 2nd for the rendering and thinning it out (this is because when I import the footage from my camera it's always very wide in after effects) There is nothing particularly abnormal about the video, not very heavy or anything and most of it isn't animated, just film. The size of the source material for the video is about 4.0 to 8.7MB.
Computer's Processor: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz
Computer's RAM: 2.00First of all, CS4 does not work well with non-production codecs like MP4. Use the Adobe Media Encoder (or something similar) to convert your footage to a production codec (Cineform, DNxHD, Quicktime with the Photo JPEG codec or Quicktime with the PNG codec).
Second, you're running AE on a system with only 2 GB of RAM? Good heavens, man - no wonder it ran out of memory! Upgrade that to 4 if at all possible. (Upgrade to much more than that if you have a 64-bit OS and plan to upgrade AE ever. Although, on a machine as old and slow as that, you might be better off getting a new machine if you want to do anything serious in AE.)
Third, what's your exact version number of AE? You should be on 9.0.2 if I recall correctly.
Fourth, your video shouldn't be looking weird in AE. It's probably misinterpreting the pixel aspect ratio of your footage. Fix the interpretation and you shouldn't have to have a separate comp for changing its size. -
I purchase photoshop element 12 and Premiere at Office Depot. The program came in a software download card. I get error saying not vaild. anyone else had this issue?
I just bought Elements 12 at Best Buy & I'm having the same problem. My serial number retrieval redemption code is invalid every time I type it in...I'm VERY FRUSTRATED!
-
Hi everyone,
it's probably just me but I have tried real hard to get a simple AnyConnect setup working in a lab environment on my ASA 5505 at home, without luck. When I connect with the AnyConnect client I get the error message "User not authorized for AnyConnect Client access, contact your administrator". I have searched for this error and tried some of the few solutions out there, but to no avail. I also updated the ASA from 8.4.4(1) to 9.1(1) and ASDM from 6.4(9) to 7.1(1) but still the same problem. The setup of the ASA is straight forward, directly connected to the Internet with a 10.0.1.0 / 24 subnet on the inside and an address pool of 10.0.2.0 / 24 to assign to the VPN clients. Please note that due to ISP restrictions, I'm using port 44455 instead of 443. I had AnyConnect working with the SSL portal, but IKEv2 IPsec is giving me a headache. I have stripped down certificate authentication which I had running before just to eliminate this as a potential cause of the issue. When running debugging, I do not get any error messages - the handshake completes successfully and the local authentication works fine as well.
Please find the current config and debugging output below. I appreciate any pointers as to what might be wrong here.
: Saved
ASA Version 9.1(1)
hostname ASA
domain-name ingo.local
enable password ... encrypted
xlate per-session deny tcp any4 any4
xlate per-session deny tcp any4 any6
xlate per-session deny tcp any6 any4
xlate per-session deny tcp any6 any6
xlate per-session deny udp any4 any4 eq domain
xlate per-session deny udp any4 any6 eq domain
xlate per-session deny udp any6 any4 eq domain
xlate per-session deny udp any6 any6 eq domain
passwd ... encrypted
names
name 10.0.1.0 LAN-10-0-1-x
dns-guard
ip local pool VPNPool 10.0.2.1-10.0.2.10 mask 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif Internal
security-level 100
ip address 10.0.1.254 255.255.255.0
interface Vlan2
nameif External
security-level 0
ip address dhcp setroute
regex BlockFacebook "facebook.com"
banner login This is a monitored system. Unauthorized access is prohibited.
boot system disk0:/asa911-k8.bin
ftp mode passive
clock timezone PST -8
clock summer-time PDT recurring
dns domain-lookup Internal
dns domain-lookup External
dns server-group DefaultDNS
name-server 10.0.1.11
name-server 75.153.176.1
name-server 75.153.176.9
domain-name ingo.local
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network LAN-10-0-1-x
subnet 10.0.1.0 255.255.255.0
object network Company-IP1
host xxx.xxx.xxx.xxx
object network Company-IP2
host xxx.xxx.xxx.xxx
object network HYPER-V-DUAL-IP
range 10.0.1.1 10.0.1.2
object network LAN-10-0-1-X
access-list 100 extended permit tcp any4 object HYPER-V-DUAL-IP eq 3389 inactive
access-list 100 extended permit tcp object Company-IP1 object HYPER-V-DUAL-IP eq 3389
access-list 100 extended permit tcp object Company-IP2 object HYPER-V-DUAL-IP eq 3389
tcp-map Normalizer
check-retransmission
checksum-verification
no pager
logging enable
logging timestamp
logging list Threats message 106023
logging list Threats message 106100
logging list Threats message 106015
logging list Threats message 106021
logging list Threats message 401004
logging buffered errors
logging trap Threats
logging asdm debugging
logging device-id hostname
logging host Internal 10.0.1.11 format emblem
logging ftp-bufferwrap
logging ftp-server 10.0.1.11 / asa *****
logging permit-hostdown
mtu Internal 1500
mtu External 1500
ip verify reverse-path interface Internal
ip verify reverse-path interface External
icmp unreachable rate-limit 1 burst-size 1
icmp deny any echo External
asdm image disk0:/asdm-711.bin
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (Internal,External) dynamic interface
object network LAN-10-0-1-x
nat (Internal,External) dynamic interface
object network HYPER-V-DUAL-IP
nat (Internal,External) static interface service tcp 3389 3389
access-group 100 in interface External
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server radius protocol radius
aaa-server radius (Internal) host 10.0.1.11
key *****
radius-common-pw *****
user-identity default-domain LOCAL
aaa authentication ssh console radius LOCAL
http server enable
http LAN-10-0-1-x 255.255.255.0 Internal
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec ikev2 ipsec-proposal DES
protocol esp encryption des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal 3DES
protocol esp encryption 3des
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES
protocol esp encryption aes
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES192
protocol esp encryption aes-192
protocol esp integrity sha-1 md5
crypto ipsec ikev2 ipsec-proposal AES256
protocol esp encryption aes-256
protocol esp integrity sha-1 md5
crypto ipsec security-association pmtu-aging infinite
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES
crypto map External_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map External_map interface External
crypto ca trustpoint srv01_trustpoint
enrollment terminal
crl configure
crypto ca trustpoint asa_cert_trustpoint
keypair asa_cert_trustpoint
crl configure
crypto ca trustpoint LOCAL-CA-SERVER
keypair LOCAL-CA-SERVER
crl configure
crypto ca trustpool policy
crypto ca server
cdp-url http://.../+CSCOCA+/asa_ca.crl:44435
issuer-name CN=...
database path disk0:/LOCAL_CA_SERVER/
smtp from-address ...
publish-crl External 44436
crypto ca certificate chain srv01_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain asa_cert_trustpoint
certificate <output omitted>
quit
crypto ca certificate chain LOCAL-CA-SERVER
certificate <output omitted>
quit
crypto ikev2 policy 1
encryption aes-256
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 10
encryption aes-192
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 20
encryption aes
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 30
encryption 3des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 policy 40
encryption des
integrity sha
group 5 2
prf sha
lifetime seconds 86400
crypto ikev2 enable External client-services port 44455
crypto ikev2 remote-access trustpoint asa_cert_trustpoint
telnet timeout 5
ssh LAN-10-0-1-x 255.255.255.0 Internal
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh xxx.xxx.xxx.xxx 255.255.255.255 External
ssh timeout 5
ssh version 2
console timeout 0
no vpn-addr-assign aaa
no ipv6-vpn-addr-assign aaa
no ipv6-vpn-addr-assign local
dhcpd dns 75.153.176.9 75.153.176.1
dhcpd domain ingo.local
dhcpd option 3 ip 10.0.1.254
dhcpd address 10.0.1.50-10.0.1.81 Internal
dhcpd enable Internal
threat-detection basic-threat
threat-detection scanning-threat shun except ip-address LAN-10-0-1-x 255.255.255.0
threat-detection statistics access-list
threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200
dynamic-filter use-database
dynamic-filter enable interface Internal
dynamic-filter enable interface External
dynamic-filter drop blacklist interface Internal
dynamic-filter drop blacklist interface External
ntp server 128.233.3.101 source External
ntp server 128.233.3.100 source External prefer
ntp server 204.152.184.72 source External
ntp server 192.6.38.127 source External
ssl encryption aes256-sha1 aes128-sha1 3des-sha1
ssl trust-point asa_cert_trustpoint External
webvpn
port 44433
enable External
dtls port 44433
anyconnect image disk0:/anyconnect-win-3.1.02026-k9.pkg 1
anyconnect profiles profile1 disk0:/profile1.xml
anyconnect enable
smart-tunnel list SmartTunnelList1 mstsc mstsc.exe platform windows
smart-tunnel list SmartTunnelList1 putty putty.exe platform windows
group-policy DfltGrpPolicy attributes
vpn-tunnel-protocol ikev1 ikev2 l2tp-ipsec ssl-client ssl-clientless
webvpn
anyconnect profiles value profile1 type user
username write.ingo password ... encrypted
username ingo password ... encrypted privilege 15
username tom.tucker password ... encrypted
class-map TCP
match port tcp range 1 65535
class-map type regex match-any BlockFacebook
match regex BlockFacebook
class-map type inspect http match-all BlockDomains
match request header host regex class BlockFacebook
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 1500
id-randomization
policy-map TCP
class TCP
set connection conn-max 1000 embryonic-conn-max 1000 per-client-max 250 per-client-embryonic-max 250
set connection timeout dcd
set connection advanced-options Normalizer
set connection decrement-ttl
policy-map type inspect http HTTP
parameters
protocol-violation action drop-connection log
class BlockDomains
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect dns preset_dns_map dynamic-filter-snoop
inspect http HTTP
service-policy global_policy global
service-policy TCP interface External
smtp-server 199.185.220.249
privilege cmd level 3 mode exec command perfmon
privilege cmd level 3 mode exec command ping
privilege cmd level 3 mode exec command who
privilege cmd level 3 mode exec command logging
privilege cmd level 3 mode exec command failover
privilege cmd level 3 mode exec command vpn-sessiondb
privilege cmd level 3 mode exec command packet-tracer
privilege show level 5 mode exec command import
privilege show level 5 mode exec command running-config
privilege show level 3 mode exec command reload
privilege show level 3 mode exec command mode
privilege show level 3 mode exec command firewall
privilege show level 3 mode exec command asp
privilege show level 3 mode exec command cpu
privilege show level 3 mode exec command interface
privilege show level 3 mode exec command clock
privilege show level 3 mode exec command dns-hosts
privilege show level 3 mode exec command access-list
privilege show level 3 mode exec command logging
privilege show level 3 mode exec command vlan
privilege show level 3 mode exec command ip
privilege show level 3 mode exec command failover
privilege show level 3 mode exec command asdm
privilege show level 3 mode exec command arp
privilege show level 3 mode exec command ipv6
privilege show level 3 mode exec command route
privilege show level 3 mode exec command ospf
privilege show level 3 mode exec command aaa-server
privilege show level 3 mode exec command aaa
privilege show level 3 mode exec command eigrp
privilege show level 3 mode exec command crypto
privilege show level 3 mode exec command ssh
privilege show level 3 mode exec command vpn-sessiondb
privilege show level 3 mode exec command vpnclient
privilege show level 3 mode exec command vpn
privilege show level 3 mode exec command dhcpd
privilege show level 3 mode exec command blocks
privilege show level 3 mode exec command wccp
privilege show level 3 mode exec command dynamic-filter
privilege show level 3 mode exec command webvpn
privilege show level 3 mode exec command service-policy
privilege show level 3 mode exec command module
privilege show level 3 mode exec command uauth
privilege show level 3 mode exec command compression
privilege show level 3 mode configure command interface
privilege show level 3 mode configure command clock
privilege show level 3 mode configure command access-list
privilege show level 3 mode configure command logging
privilege show level 3 mode configure command ip
privilege show level 3 mode configure command failover
privilege show level 5 mode configure command asdm
privilege show level 3 mode configure command arp
privilege show level 3 mode configure command route
privilege show level 3 mode configure command aaa-server
privilege show level 3 mode configure command aaa
privilege show level 3 mode configure command crypto
privilege show level 3 mode configure command ssh
privilege show level 3 mode configure command dhcpd
privilege show level 5 mode configure command privilege
privilege clear level 3 mode exec command dns-hosts
privilege clear level 3 mode exec command logging
privilege clear level 3 mode exec command arp
privilege clear level 3 mode exec command aaa-server
privilege clear level 3 mode exec command crypto
privilege clear level 3 mode exec command dynamic-filter
privilege cmd level 3 mode configure command failover
privilege clear level 3 mode configure command logging
privilege clear level 3 mode configure command arp
privilege clear level 3 mode configure command crypto
privilege clear level 3 mode configure command aaa-server
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:41a021a28f73c647a2f550ba932bed1a
: end
Many thanks,
IngoHi Jose,
here is what I got now:
ASA(config)# sh run | begin tunnel-group
tunnel-group DefaultWEBVPNGroup general-attributes
address-pool VPNPool
authorization-required
and DAP debugging still the same:
ASA(config)# DAP_TRACE: DAP_open: CDC45080
DAP_TRACE: Username: tom.tucker, aaa.cisco.grouppolicy = DfltGrpPolicy
DAP_TRACE: Username: tom.tucker, aaa.cisco.username = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username1 = tom.tucker
DAP_TRACE: Username: tom.tucker, aaa.cisco.username2 =
DAP_TRACE: Username: tom.tucker, aaa.cisco.tunnelgroup = DefaultWEBVPNGroup
DAP_TRACE: Username: tom.tucker, DAP_add_SCEP: scep required = [FALSE]
DAP_TRACE: Username: tom.tucker, DAP_add_AC:
endpoint.anyconnect.clientversion="3.1.02026";
endpoint.anyconnect.platform="win";
DAP_TRACE: Username: tom.tucker, dap_aggregate_attr: rec_count = 1
DAP_TRACE: Username: tom.tucker, Selected DAPs: DfltAccessPolicy
DAP_TRACE: Username: tom.tucker, DAP_close: CDC45080
Unfortunately, it still doesn't work. Hmmm.. maybe a wipe of the config and starting from scratch can help?
Thanks,
Ingo -
Content Server Error - User not found in Identity Store
Hello,
I am trying to setup an external provider in Weblogic so that I can authenticate users via Oracle Access Manager / Oracle Internet Directory.
I have followed the documentation and created a new provider for my external Provider and called it OIDAuthenticator. I have made sure that the Control Flag is set to SUFFICIENT. Oracle Access Manager is installed and configured. It authenticates my logins and SSO works fine.
The problem is that when I try to create users in OID and then login to Webcenter, I get the following error:
WCS#2012.02.14.07.49.09 : User: tuser03 not found in identity store.
The strange thing is that I am successfully logged in with the correct groups after I click on the ok button on the error popup.
Any ideas???
Thanks,
Darren.The error goes away if I add the user to the Embedded LDAP.
This looks like a problem with the Control Flag setting but I can't see what I've done wrong because I have checked the Control Flag has been set to SUFFICIENT for OIDAuthenticator and OIDAuthenticator providers.
Have I missed something? -
Error User not found at the time of new group creating
Dear All,
It's quit urgent i am getting an error while creating the new group in sharepoint
System.ArgumentException: User cannot be found.
at Microsoft.SharePoint.SPList.GetItemById(String strId, Int32 id, String strRootFolder, Boolean cacheRowsetAndId, String strViewFields, Boolean bDatesInUtc)
at Microsoft.SharePoint.SPList.GetItemByIdSelectedFields(Int32 id, String[] fields)
at Microsoft.SharePoint.ApplicationPages.PeoplePage.GetCurrentGroupListItem(String field)
at Microsoft.SharePoint.ApplicationPages.PeoplePage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Just for an update i found another thing the same error arrive when i try to change the following
1) Assign new primary administrator through the specific site collection
2) Assign site collection administrator through site settings
I already test the thing with new web application & site collection in other site collection every thing works fine ?
Please if any one know answer it ASAP
RBThe problem is likely in the user info list on the site collection. Each site collection has its own user info list, and people are added to this with an ID that is unique to that person on that site collection. Go to the following url of your site
collection and check the list.
http://sitecollection/_catalogs/users/detail.aspx
The list of
users of the
site collection _catalogs/users/detail.aspx also
be seen as
/_layouts/people.aspx?MembershipGroupId=0
You can test
whether the
user is
there?
You may also restart the User Profile Services and see id this is resolved.
Maybe you are looking for
-
Maintaining non-cumulative values in Mlti provider
Can we maintain non ucmulative values inteh multi ptovider Extras - > Maintain non cumulative values section. I created few new cubes which has non cumulative keyfigures . In the cube I made 0CAL DAY as reference characteristic and selected Compan
-
Problems displaying album artwork in iTunes 7
Hi. I just upgraded to iTunes 7 and a lot of the artwork I have dilligently searched for and attatched to all of my albums over the past few years, with older versions of iTunes, are messed up. Some are missing and some others aren't being displayed
-
Problems wit creating a new database on solaris wit dbca ORA 09925/ORA-1031
Hi Oracle users, I'm using Oracle 10gR2 on Solaris and try to create a new database instance. I'm using dbca for that task. After making all the settings I get the error ORA-09925 and then ORA-1031. For the second error I found the advice to run te r
-
Muse slideshow -random image sizes
when I add multiple images (same size!) to a slideshow, they show up in different sizes and I just can't figure out why?! fisrt image in thumbnail and the large image: second image in thumbnail: and its large counterpart: it doesn't help to manually
-
I'm hoping someone can point me in the right direction here. I have almost finished a site where on one page I have inserted some code from a tooltip I found on the net to create a rollover explanation of certain text. The problem is that now I have