Terminal server DLU policy only - nothing else applies

I have a Windows Server 2003 with Terminal Server. When a user logs
in I want a DLU policy to take affect, but nothing else. No bundles
installed, no other policies applied. What is the best way to make
sure that it works this way? During testing, I logged in as a user
and a bundle installed an app.
Thanks,
Ken

Configure System Requirements on the Bundles/Policies so they are not
effective for the Terminal Server?
On the settings of the Terminal Server Object, you could also set the
'Bundle Management" to disabled.
On 5/2/2012 1:24 PM, KeN Etter wrote:
> I have a Windows Server 2003 with Terminal Server. When a user logs
> in I want a DLU policy to take affect, but nothing else. No bundles
> installed, no other policies applied. What is the best way to make
> sure that it works this way? During testing, I logged in as a user
> and a bundle installed an app.
>
> Thanks,
> Ken
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

Group Policy design for Terminal Server

Hi, I am mixed about group policy design for Terminal server
My Infrastructure is so;
Zone
      ->Department
                   ->User
                   ->Computers
      ->Department
                   ->User
                   ->Computers
      ->Department
                   ->User
                   ->Computers
Server
       ->OtherServer
        ->TerminalServer (TerminalComputersGPO)
I create two group policy for user and for terminal server computers (security filtered for Terminal_Users)
I want to use terminal server user policy but it must effect
just in terminal computers. not TS user's computers. what i must do? where i must locate it?
Please click "Vote As Helpful" if it is helpful for you and "Propose as Answer"

Hi Davut EREN - TAT,
According to your description, you would like
terminal server user policy applying to users which log on to terminal computers. Right?
As MuhammadUmar's suggestion, you can use Loopback in replace mode. The GPO list for the user is replaced in its entirety by the GPO list that is already obtained for the computer at computer startup.
In the real work environment Loopback processing of Group Policy is usually used on Terminal Servers. For example we have users with enabled folder redirection settings, but we do not want these folder redirection to work when the users log on to the
Terminal Server, in this case we enable Loopback processing of Group s Computer account and do not enable the folder redirection settings.
For more information about this policy, please refer to the following articles:
Loopback processing with merge or replace
Loopback processing of Group Policy
Regards,
Lany Zhang

Using 2 application on 1 terminal server

Hi ,
I have 2 application running on my terminal server . and in terminal server you can only run 1 application on login , how to setup the terminal sever to boot 2 application and the user choose with one he want to use .
is it the best way to create a group policy and stop everything and on the desktop and just keep the 2 icons .
if there is any solution please let me know
Joseph Dargham

Hi,
I think a remote application being published is the best way to tackle this. That way you can publish the application to a web page, or to the users start menu, and they can select it, it will then launch only that application. The user can run multiple
applications simultaneously this way too.
Are you using 2012? If so check out this resource
http://ryanmangansitblog.wordpress.com/2013/03/16/rds-2012-publishing-a-remoteapp/
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Cloning Windows Terminal Server VM multiple times ?

Hi,
I got one Windows Server 2008 R2 Standard that is already configured as Terminal Server (RDSH) it only contains Microsoft Office 2010 Professional SP2. I have joined this host to the AD domain and it can communicate to the licensing server as well.
Note: I’m running VMware vSphere as the hypervisor.
I need to deploy around 45 more terminal servers VM and wondering if I can just clone the fully configured VM above and then change the IP address and server name manually (rename the server and then re-join the domain). Would that be possible or is there
any caveats that I need to know before doing this way?
Thanks.
/* Server Support Specialist */

Build your "gold image" with Office, PDF whateverotherapplication installed.
Remove the server from your RDS deplyoment (you don't need to remove the RDSH role)
Sysprep.exe /generalize /oobe /shutdown
You now have a sysprepped gold image
clone until your heart is content
Rename cloned image and join to domain.
Add cloned machine back into your deployment (see below)
Add-RDServer -Server$serverFQDN-Role"RDS-RD-SERVER"-ConnectionBroker$activebroker
Add-RDSessionHost -CollectionName $collection -SessionHost $servername -ConnectionBroker $activebroker

Outlook Integration Standalone on terminal server

Forum,
Have a system on 8.8 and the users would like to start using the outlook integration utility in order to email out of SAP. These users access SAP via a terminal server and with only having the stand alone version installed, this doesn't give them the same capabilities as the full blown outlook integration. i.e. Snapshot - Does not show the templates and therefore doesn't handle attachments.
The only way I see this working in this scenario is for them to purchase Mircosoft Licences and have these published on their TS sessions.
Can anyone on here advise a way of getting the stand alone version to work without having to purchase these microsoft outlook licences?
Regards,
Juan

Can anyone on the forum shed any light on this subject please?

DLU Policy for terminal server

Hi all
I am trying to apply a DLU policy to allow users to remotely login to a terminal server. However, I do not want the DLU policy to allow users to have remote desktop access to other workstations.
Right now I have 3 DLU policies configured
DLU Admin - Grants IT users full admin access to all devices
DLU Users - Gives employees access only to the users and power users group on the managed devices
DLU Remote - grants remote desktop access to specific users
Is there a better way to assign a remote dlu policy to a specific device?
I want to lock down the DLU to specific devices.
thanls

JSorrenti,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Run only allowed application gpo and ie 11 on remote desktop server (terminal server)

I configured win 2008 R2 server as Remote desktop server (terminal server) and I have domain GPO that's applying to this server. when I configure "Run only specified Windows application" IE 11 does not work.
I have iexplore.exe as allowed application.
when new user profile is created it setup and user can open other listed application fine but soon as IE 11 launched the IE windows loads up and after about 15-20 seconds it closes.
if I remove the "Run only specified Windows application" policy then everything works fine.
I am trying to figure out if any other .exe I have to allow in order for this to work properly?
nothing in event viewer about ie crashing.

> "Run only specified Windows application"
Don't use this setting... This only restricts explorer.exe from
launching applications. If you manage to create a cmd file or open a
command prompt, this policy is useless.
Better switch to AppLocker :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

DLU policy not applying - Console One won't OK

I've created a DLU policy that has administrator group rights. When I try
to associate it to a user I click OK and the the screen stays (doesn't
close). The button isn't greyed out and an hour glass appears but it does
nothing. I've tried the reverse - associating the policy from the user -
with the same results. Tried deleting and recreating both the user and
policy in different containers.
Dsrepair shows everything is clean and the tree is synced.
Single server tree, netware 5.2 sp7, zen 3.2, console one 3.5
I have other trees exactly the same and do not have this issue....

Don't really want to apply anymore patches. We did on one install and it
messed up all our configurations. This is at a school and with the
students now back I can't afford any down time.
> Hi
> Could you try with Zen SP3 on the current 1.3.6c Consoleone if you see
> the same problem ?
>
> --
> Regards, Kai Reichert
> Novell Support Forum Sysop
>
> People who claim that computers will make life easier for us have
> obviously never used one.

I cannot access the internet using firefox. The little toolbar identical (the far upper right in the screen) pops up and nothing else happerns. This has only started very recently and I have not had this problem in the past.

When I click on the icon for firefox, a little toolbar (the one you see in the top right corner of the screen) pops up and nothing else happens. I'll close it out and retry, with only the same results. I tried Firefox safemode, with the same result. Like there is something blocking me, but I don't know what. It doesn't matter if I've been on the computer for some time or just started up, I cannot access the web thru Firefox. This has only started in the last couple days. Previously, I've never had this problem. I haven't loaded any new programs anytime recently to account for this. I use Norton for my anti virus program which is the newest and had since end of December. I am not happy having to use the windows internet explorer, so would be very happy to get this resolved. Should I uninstall the mozilla program, and then reinstall it?

"I have an ethernet cable in port 1 on my computer. That is configured manually to access ther office network."
Do you have a "real" IP address or a private (192.168.x.x, 10.x.x.x, 172.x.x.x) IP address?
"The wireless router was connected to the company server only for the purpose of getting me online through Airport because I couldn't access it using an ethernet connection"
Could not access it because their network security blocked you by intent, or had some unknown technical difficulty?
Unless you are blocked by intent or ommission (if they have to explicitly allow your machine) I can think of no technical reason why your wired connection should not both get you on their network and on the internet in general. You should not need to be dual homed (though dual homing should work as well).
Please answer the questions above when you can - I think solving the wired LAN issue will be easier if you are not being intentionally blocked.

Outlook 2010 Pro Plus not showing Retention/Archive Policies only on Terminal Server

I have Office 2010 Pro Plus (Terminal Server License) installed on Remote Desktop Services 2008 R2 and running Outlook 2010 against Exchange 2010 SP1 with Enterprise CALS for all users. If I run Outlook locally on a PC (not TS Client)
I have apply folder retention policies and archival policies no problem but if I open Outlook on Terminal Server I cannot. Everything is greyed out. This is the exact same version of Outlook, just different keys but I can't apply any policies for
the Terminal Server users.
So, to clarify, on a regular PC, I can click an Outlook folder, click on the "Policies" button on the ribbon and have retention policies as well as Online Archive settings as I should but when I use the same version on Terminal Server
the Policies button is greyed out completely and cannot set. I am NOT using auto-archive settings and not using PST files, only Online Archive.
Thank you

I think you are in the wrong forum - OCI questions (as opposed to OCI) should go here:
Oracle Call Interface (OCI)
Best of luck

Group Policy For 2008 Terminal Server Users Default Open With Not Working

I'm trying to change the default open with behavior for jpg files on my terminal server. I created a Group Policy that changed it to MS Paint to Office 2010 Picture Manager. The policy appears to apply correctly but jpg files still open in
Paint. When a user is logged on, if they look at the properties of a jpg, it shows Photo Gallery as the program to open it but when opened, it opens in Paint.
Has anyone seen this behavior before?
Orange County District Attorney

> did. It would be helpful to know where the changes actually go in the
> registry to see if they did or now.
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Why is my hard drive full when I only have the operating system loaded and nothing else? No pics, music, nothing...It's the 60 Gig hard drive on the air built in late 2010.

Why is my hard drive full when I'm only running the operating system and nothing else is loaded? No music, pics, nothing! I understand the hard drive is small at 60 gig, but I can't believe the os would take up that much space.

First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space. According to Apple documentation, you need at least 9 GB free on the startup volume for normal operation. You also need enough space left over to allow for growth of your data. Use a tool such as OmniDiskSweeper to explore your volume and find out what's taking up the space. Proceed further only if the problem hasn't been solved. ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To really see everything, you have to run it as root. Back up all data now. Launch the Terminal application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. After installing ODS in the Applications folder, drag or copy — do not type — the following line into the Terminal window, then press return:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up.
I don't recommend that you make a habit of this. Don't delete anything while running ODS as root. When you're done with it, quit it and also quit Terminal.

I receive a Software Update notice that fails. How do I find out who/what is trying to update? How do I stop its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

About once a month I receive the Software update notice that has failed. How do I find out who/what is trying to update? If I decided I want this update how do I allow it to continue? If I decided I do not want this update how do I stop it and its attempt to update? The only response allowed is "OK". When OK is selected the window goes away and nothing else happens.

Hi sharkbiscuit79,
Yes your cabinet 10 on the Crediton exchange has already been installed and linked with a FTTC DSLAM cabinet (making it able to provide FTTC fibre broadband) and has been Accepting FTTC orders since December 2013. PCP10 (with it's DSLAM cabinet within 100meters of it) is locate on the junction of Commercial Road and the A3072.
However by the looks of things your are just too far away to obtain a FTTC (VDSL2) connection, meaning FTTC fibre broadband is not available to you.
Have a look at the Connecting Devon and Somerset Considerations (particularly the last paragraph) - http://www.connectingdevonandsomerset.co.uk/where-when-map-conditions/
Your best bet is to talk to Connecting Devon and Somerset to see if there are any further plans to get a fibre based service to your area via https://www.connectingdevonandsomerset.co.uk/contact-us/ (as your area may not be inscope of any further deployment). Best give them your full address and landline number too as they can check if you are within a NGA area.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

I only see Robo form bar and nothing else shows up on the screen

I was using Firefox fine. Few days ago, it upgraded to the lateste vrsion whateer it is. Then, when I rau Firefox, I only see Roboform bar on desktop screen and nothing else. I uninstalled Firefox and installed old version 3.03. but the same problem occurs.

Sorry, I clicked on the wrong link.
davewdan

Terminal server DLU policy only - nothing else applies

Similar Messages

Maybe you are looking for