Terminal Server Licensing doesn't assign user licence

Hi,
We've Windows Server 2008 R2 as Terminal Licensing Server, without Remote Desktop Session Host server on the network. Licensing server is member of domain and SRDLS configuration says everything green.
On Licensing Server I can see a lot of Added licences (column "Total licences") but for all of them there is 0 Issued, and a lot of clients are using RDS service. There is no any specific Terminal event logs.
How I can start troubleshooting this issue?
Potential ideas:
- how can I check if Terminal CALs are activated?
- how can I check if my clients are using that wanted Terminal License server?

Hi,
Reports are empty, there is no any user listed in report.
Issued licences (in TS Licensing console) says 0, even Total liceses is listed in two groups with X and Y licences.
What do you suggest for next step?
Thnx

Similar Messages

  • Get Report of Terminal Server license report

    Is there a way I can track our Terminal Server Licenses usage. For example I have bought 50 licenses, are they being used to full capacity or under used. What is the monthly maximum usage. And we have about 10 servers hosting terminal services
    in our AD, do I have to generated a report for each ? Is there tool that can do this ? Windows 2008 R2 and Windows 2012 R2

    Hi,
    Thank you for posting in Windows Server Forum.
    For finding active session on terminal server you can use command as follow.
    query session /server:SERVER2
    A user can always query the session to which the user is currently logged on. To query other sessions, the user must have Query Information access permission.
    More information.
    Query session
    http://technet.microsoft.com/en-us/library/bb490800.aspx
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Move Terminal server licenses to another server

    We have one terminal server VM hosted in hyper v server. currently there is a problem with the hyper v server hdd and we might need to rebuild the whole server. We would like to setup a new terminal server on a new server. The existing terminal server is
    windows server 2003. After I fresh setup the Windows server 2003 VM in a new server, how do I move the terminal server license to a new server? FYI, we would like to decommission the old terminal server. But we would like to do it in parallel as there are
    many users are still accessing to the old terminal server.
    Thanks so much.
    Regards,
    Henry

    Hi Henry,
    First you need to gather your licensing paperwork, authorization number(s), license number(s), etc. for your existing licenses.  This step is critical.
    Next install RD Licensing on the replacement 2003 server, Activate it using Terminal Server Licensing (licmgr.exe), then install the TS CALs.  If you receive an error when installing the old TS CALs please contact the Clearinghouse and explain
    to them you need to install the TS CALs on a new server because the old one is being decommissioned.
    How to locate a telephone number for the Microsoft Clearinghouse
    http://support.microsoft.com/kb/291795
    Once you have confirmed that the old TS CALs are installed on the replacement 2003 TS then make sure your 2003 TS is set to the correct Licensing mode (to match the type of TS CALs) and you have Specified the name of the new RD Licensing server. 
    You do this in Terminal Services Configuration (tscc.msc) on the replacement terminal server.
    As an alternative you could install the existing TS CALs on a newer RD Licensing server such as Server 2008 R2, Server 2012, etc.  You still will need to have the authorization number(s), license number(s), etc. for the existing 2003 TS CALs.
    How to move Terminal Services CALs from one license server to another in Windows 2000, Windows Server 2003 and Windows Server 2008
    http://support.microsoft.com/kb/953918
    -TP

  • Windows Terminal Server Licensing Mode

    Hi all.
    Anybody knows how to license a Windows Terminal Server to be used only throught SGD?. I have more than 100 users behind a SGD, and I want to export Windows applications to them.
    I know that there are to kinds of Windows Terminal Server licenses. Users or Devices CAL's. If I'm using SGD, do i need a license for each users, or with one license for each SGD server is enought?.
    Thanks.

    Hi.
    It's not Oracle limitation or rules. It's rules of Microsoft.
    http://tonymackelworth.wordpress.com/tag/multiplexing/
    http://download.microsoft.com/download/8/7/3/8733d036-92b0-4cb8-8912-3b6ab966b8b2/multiplexing.pdf
    "You may deploy network architectures that use hardware or software to reduce the number of devices or users that directly access the software on a server. This is referred to as multiplexing or pooling. However, this does not reduce the number of CALs required to access or use the server software. A CAL is required for each device or user that is connected to the multiplexing or pooling software or hardware front end."
    Regards.

  • Office 2013 terminal server licensing

    We need to install Office 2013 Pro+ on a MS terminal server.  I've been reading around and have determined we need a volume license copy of O2013 and enough licenses for the number of desktops accessing it.  Just a couple of questions...
    Does O2013 have to be installed on the client desktop?  If not, how does one install the license without installing O2013?
    I have a user on a desktop in the office with O2013 installed and licensed.  This user goes home and connects to the office network/terminal server using their home PC over a VPN.  Do we need 2 licenses for this one user, one for the work PC and
    one for the user's home PC?
    Thanks!

    This article, and the linked PDF "Licensing brief", should help:
    http://www.microsoft.com/licensing/about-licensing/briefs/remote-desktop-services.aspx
    Office does not have to be installed on a client desktop - even if you assign a license to that desktop just for the purpose of entitling Office-via-RDS at that desktop. E.g. if you used thin-clients or Linux instead of "full desktop Windows",
    you can't install Office there, but if the device is used for Office-via-RDS, you must assign an Office license to that device.
    You don't "install the license" - you assign a license (which is simply keeping records that you have "allocated" a license).
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • Terminal Server Licensing 2003 to 2012 mixed environment - issue

    We have 1 2003 Terminal Server and 1 2012 RDSH. We recently
    migrated 2003 Terminal License Server to new 2012 RD Licensing Server.
    On 2012 RD Licensing Server we have been instaled 20 - 2012 RDS Per Device Cal and 20 - 2003 TS Per Device Cal.
    I sometimes works on Terminal
    Server 2003 or 2012. And here is a problem with issued Terminal license for Device. When I Logoff from
    2003 TS and then I log in to 2012 RDS - the 2012 RD Licensing Server issued new license for my computer on this same name. When I do the same in the reverse order - the 2012
    RD Licensing Server issued next new license for my computer. I do this several times and now I have 10 permanent 2012 RDS license issued for this same computer with this same name, and 5 temporary 2012 RDS license issued for this same computer and 1 temporary
    2003 TS for this same computer.
    I have no idea how resolve this problem.
    Thanks in advance for any help anyone can provide. 
    Lukas

    Hi,
    I probably tested everything.
     - reinstalling license server
    - reactivate license server
    http://technet.microsoft.com/en-us/library/cc739075(WS.10).aspx
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;983385
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/ca458045-fb99-4c63-ad55-b738f2d5f49d/ts-license-manager-problem
    And still I have the same problem.
    From my Event Viewer:
    Log Name:      System
    Source:        Microsoft-Windows-TerminalServices-Licensing
    Date:          
    Event ID:      42
    Task Category: None
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:     
    Description:
    An error occurred in policy module "Policy Module for company Microsoft Corporation product A02 has denied new license request with error code 14.
    I searched for everywhere to solving this problem. Without positive results :(
    Please help!

  • Running adobe acrobat on a terminal server & licensing purchase

    Is it possible to run both the standard and professional versions of adobe acrobat (1 license of each) on a terminal server? Each version would be security locked down to the specific licensed user.
    Also
    If you purchase adobe acrobat through licensing is it possible to purchase just one license or is there a minimum number of licenses that you can purchase? Is the better option for one license to purchase the boxed retail product?

    You have a better chance to get a helpful reply if you ask in the Acrobat forum, or even at http://forums.adobe.com/community/licensing

  • Terminal Server Licensing Problems with GPO Security Group License Server

    Hello,
    I have two fresh installs of W2K12R2.
    One is RD Session Host and the other one is the License Server. Everything is fine until I active the GPO Security Group License Server. After that the License Server gives no licenses
    to die clients (we have User und Device CALs). TS Licensing Diagnostic’s shows no errors, the number of available licenses is displayed correctly, even the state of GPO Security Group License Server is correctly shown as "active" and die
    Membership in the Group "RDS-Endpointserver" is "Yes". Eventlog shows no Errors. Log in on the session host is even possible, maybe because the RDS-Service is in evaluation time.
    If the GPO Security Group License Server is disabled again, the server starts to serve licenses as expected.
    I don’t know what I can do anymore, never had problems with exact the same setup under W2K8, but with W2K12 is the second time I notice this issue.
    Thanks for your ideas,
    Andreas

    Hi Andreas,
    Thank you for posting in Windows Server Forum.
    Sorry to inform but there is no official document for server 2012 related to this event, you can go through below article for reference.
    You cannot use a security group to add computer accounts to the Terminal Server Computers group. You must add each computer account explicitly. To verify whether an RD Session Host server is allowed to request RDS CALs from the Remote Desktop license server,
    you can use the IsSecureAccessAllowed method of Win32_TSLicenseServer class. For more details about this method, click here.
    1. License Diagnosis tool returns error "License server <computer name> cannot issue RDS CALs to the Remote Desktop Session Host Server because the 'License server security group' Group
    Policy setting is enabled."
    2.Control the Issuance of RDS CALs
    Note: You should only enable this policy setting when the license server is a member of a domain. You can only add computer accounts for RD Session Host servers to the RDS Endpoint Servers group when the license server is a member of a domain.
    Hope it helps!
    Thanks, 
    Dharmesh

  • How to query the terminal Server Licensing grace period

    Hi,everyone
       A few day ago, i installed a windows 2K8 R2 as a terminal server ,and specify itself as a terminal licensing server ,but without install any CALs.So erevytime i logged into the terminal , system will pop up a message said that the terminal
    server's grace period will expired at xxx days. but due to someone unchecked the message , systme can't pop up any message talked about the grace period.
      So can anyone tell me where can i find the remaining grace period  ??
    Jacky_Deng

    Hi,
    You can retrieve the number of days remaining in the grace period via WMI.  Instructions below:
    Logon to your server as an administrator
    Start--All Programs--Accessories--Right-Click on Command Prompt and choose
    Run as Administrator
    Enter the following command:
    wmic /namespace:\\root\CIMV2\TerminalServices PATH Win32_TerminalServiceSetting WHERE (__CLASS !="") CALL GetGracePeriodDays
    -TP

  • Outlook 2013 on terminal server Search failes for all users

    we have a small comany with a new Windows 2012 Fileserver and Terminal Server.
    Office 2013 is installed and we use Office 365 - Exchange Online as our mailserver.
    We use Outlook with the Cached Exchange Mode ON. We have shared our mailboxes with our collegues.
    Indexstatus is complete for all the users.
    So far the information i have.  
    I suspect wrong permissions on the Windows Search Folders are the cause of my problems but where can i find the Windows Search Folders which are indexed (and shoot be accesable for the users).

    Winnie, thank you for your answer. 
    1. Make sure indexing is complete. ==> Index is complete
    2. Make sure Indexing Options are configured correctly ==> Indexing Options are configured correctly for the administrator, Outlook
    isn't configured in de Indexing options for the users (that might be the problem i guess)
    3. Make sure Outlook data is included in indexing==>
    Outlook Data is included in indexing
    See screenshots below:
    First screenshot are the Indexing Options as configured for the users, the seconde one are the indexing options for the administrator. I suspect there is my problem, but can't find the solution the solve this for the users.

  • One user has very slow network drives on terminal server.

    Hello,
    I am using a windows XP machine to connect to a 2003 terminal server. I have one user that was complaining about how long it took her to open files from a network share. I found that this is a problem with her account as it is slow no matter where she logs
    in from. E.G when I log in to the server from my computer as me, it is quite fast, if I do the same but log in as her it is painfully slow accessing the network drives.
    Does anyone has any ideas?Kind regards,
    Chris

    Hi Chris,
    Thank you for your comment.
    The issue seems it’s related to network problem, please check the network connection behavior. Network performance issues can also be caused by auto-tuning, because not all network devices support auto-tuning well. So try to disable the autotunning behavior
    with below mention command and check the result.
    netsh int tcp set global autotuninglevel=disabled
    In addition check KB 885189 for slowness mapped drive issue to Server 2003. Apart from this, check the below article to make the network connection fast.
    Windows 7 Network Slow
    Hope it helps!
    Thanks,
    Dharmesh

  • Outlook 2010 Pro Plus not showing Retention/Archive Policies only on Terminal Server

    I have Office 2010 Pro Plus (Terminal Server License) installed on Remote Desktop Services 2008 R2 and running Outlook 2010 against Exchange 2010 SP1 with Enterprise CALS for all users.  If I run Outlook locally on a PC (not TS Client)
    I have apply folder retention policies and archival policies no problem but if I open Outlook on Terminal Server I cannot.  Everything is greyed out.  This is the exact same version of Outlook, just different keys but I can't apply any policies for
    the Terminal Server users.
    So, to clarify, on a regular PC, I can click an Outlook folder, click on the "Policies" button on the ribbon and have retention policies as well as Online Archive settings as I should but when I use the same version on Terminal Server
    the Policies button is greyed out completely and cannot set.  I am NOT using auto-archive settings and not using PST files, only Online Archive.
    Thank you

    I think you are in the wrong forum - OCI questions (as opposed to OCI) should go here:
    Oracle Call Interface (OCI)
    Best of luck

  • Outlook 2013 in a 2012 r2 Terminal Server environment and crashes after initial setup. It will not launch in safe mode

    I am running terminal server 2012 R2 (RDS environment) In Windows Domain, 8 users across a LAN on a new server.  Outlook 2013 crashes and will not load in safe mode. Outlook allows the initial profile setup and when the configuration is complete, it
    crashes and will not launch or launch in safe mode. I have deleted the outlook profile and reconfigured it.  The problem continues on all user accounts. The firm is not using Exchange and  is using a POP3 account. I have a 13 user Office Volume License
    (per device) and 15 terminal server Licenses ( per user)
    Problem Event Name :      APPCRASH
    Application Name:            Outlook.EXE
    Application Timestamp :   52b0b282
    Fault Module Name :        OUTLOOK.EXE
    Fault Module Version :     15.0.4569.1503
    Fault Module Timestamp:  52b0b282
    Exception Code:                 C0000005
    Exception Offset:                00340b9
    OS Version:                      6.3.9600.2.0.0.16.7
    Local ID :                         1033 
      Any help would be much appreciated.

    follow this instruction to troubleshoot Outlook crash issue:
    http://support.microsoft.com/kb/2652320
    Flynn

  • SBS2003 + Terminal server 2003

    We have a SBS 2003 with a Terminal server licensing (TS per user call) / manager / configuration role installed. We want to remove the sbs and use the TS in a workgroup.
    Can somebody plz explain me the steps.
    Thanks

    Hi,
    Thank you for your posting in Windows Server Forum.
    There is step by step guide for demoting and removing server from the network. Please go through below article for more information.
    Demote and Remove the Server Running Windows SBS 2003 from the Network
    http://technet.microsoft.com/en-us/library/ee523227(v=ws.10).aspx
    To work TS server 2003 in workgroup mode, you need to check some basic things. You need to locate the terminal service license server. Please check below article for more information.
    Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
    A Windows Server 2003-based terminal server cannot locate the Terminal Services license server
    Hope it helps! 
    Thanks,
    Dharmesh

  • DI Server License

    Excuse my ignorance but I am not technical.
    My development team asked me to install a DI Server license so that they can connect their applications to SBO.  I notice that this license doesn't need allocation to a user which does make sense but... 
    But does this mean that the connection has full access rights or does it inherit the credentials of the user given?
    Many thanks.
    Damian

    Hello Damian,
    You're right, it is unnecessary to allocate DI Server License to the specific user for its license is per CPU type, which can serve with several connections. You can check the DI Server License through:
    Administration=>License=>Licnese Administration=>Tab Componets=>DI Server
    Usally one is enough.
    And  the connection inherit the credentials and access right of the user given.
    Regards, Yatsea

Maybe you are looking for

  • Automatic TO Creation for Inventory loading

    Hi , Is there any way to create Transfer Order for a material document with 561 movement type (With and without Handling Units ) ? I believe system doesn't create any TR for intial inventory upload  , is that also correct ? Regards Sandeep

  • Error creating accounting document for a credit note

    Hi All, I am facing an issue while creating an accounting document for the credit note created. The scenario is as follows: Created a credit memo --> created credit note --> create accounting document While creating accounting document, i'm getting a

  • What are the steps for burning HD footage to a DVD?

    Up until now I have been shooting in SD and burning DVDs, using the Share feature in FCP X. Now I am wishing to do the same thing with HD footage. Am I correct in understanding I must first export to Compressor 4? I have been attempting to do that, b

  • E-mail text for invoice

    Hi all, In transaction NACE, for output type RD00 (Invoice), I have defined the mail title and text. When sending e-mail (external send), the title from NACE appears in the e-mail subject line, but the text in the mail body does not. Does anyone know

  • BAPI for  Order Reasons

    hi. can u pls tell  me the bapi which can give the order reason data.................. regards Guru