Terminal Services - drive redirection doesn't work.

Hi,
I have got two Terminal servers on Windows 2012 DataCenter(T1 and T2) + AD on Windows 2012 DataCenter.
My problem is, that on a terminal T2 drive redirection doesn't work(also printers and clipboard).
I tried the following things:
- GPO on AD (Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Device and Resource Redirection\Do not allow drive redirection=DISABLE).
- local GPO on terminal T2 (Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Device and Resource Redirection\Do not allow drive redirection=DISABLE).
- FW is disabled on both terminals.
- Terminal configuration allows to redirect drives and printers.
- I tried to login with domain account and local account, on both account redirection doesn't work.
- System Logs seem to be alright.
- Of course on the client side I mark redirect local drives.
Both terminals are the same, both are VM(T2 is a clone of T1).
Please help...

Hi,
Thank you for posting in windows Server Forum.
Have you check the firewall rules? Please check that ports/ firewall is not blocking the drive to get redirected. For firewall try to disable the firewall and check. You can use below command on the client.
netsh firewall set opmode mode=disable
This will eliminate the firewall altogether; assuming you are using Windows firewall. Otherwise, disable any other firewall / blocking software and see how it reacts without firewall. Additionally, go back into RDP and manually "set" those options
to allows Disk Drive Mapping and Printer pass-through.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Similar Messages

Why does fcpx suddenly stop reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

why does fcpx suddenly stops reading audio files? ever since i upgraded to Yosemite. Than when I check it on my hard drive it doesn't work as well. Only this file. Am in a trouble of delivering now. Any help?

Could be systems logs or some other system file growing.
Use OmniDiskSweeper or DaisyDisk to map what's being used.
Regards,
Shawn

Nokia Drive + beta "Drive to" doesn't work on Lumi...

Hi,
Seems like Nokia Drive + beta doesn't work on my Lumia 920. I'm currently in Macedonia and trying to get directions from one location in Skopje to another always gives me the message: "Sorry , can't find your route. Navigation is not yet available in your country. Please go back."
I have the Macedonia map downloaded, and I have checked the list of supported countries, where Macedonia does appear. Nokia Maps seems to have no problem finding a route between the same two locations, but Nokia Drive + beta keeps giving me that message.
http://discussions.nokia.com/t5/Maps-Navigation-and-GPS/In-which-countries-can-I-use-navigation-with... Nokia list here also shows Macedonia is supported.
Nokia Drive version: 2.1.0.1451, map 8.0.48.113 (info from Nokia Drive + beta about screen)
Any ideas?

For me it doesn't work even if the location is only 2.2km away. lol @ fuel company shares
I wonder if we can get someone in tech support at Nokia to read this. I've tried contacting their support chat but we didn't get far (or anywhere for that matter). I'd like to know whether this issue is known or not, and whether a fix is planned. If it's an isolated case, what can I do to make it right? I'm willing to work with someone in order to get this resolved.

Time Zone Redirect Doesn't work on Windows 2008 R2 Terminal Server

Hello All,
A client has two Windows 2003 and two Win 2008 R2 Terminal servers.
When users from a different time zone login to the Win 2003 server, the time zone of the server changes to reflect their own time zone.　 However when they login to the Win 2008 R2 servers, the time zone on the server doesn’t change.
I already enabled the "Allow time zone redirection" on both Win 2008 R2 Terminal Servers in :
Computer Configuration\Policies\Administrative Templates\Windows Components\Terminal Services\Terminal Server\Device and Resource Redirection
Yet when the clients login to the 2008 server and checks the time on the server, it still shows local/server time and not their own time zone.
Any input will be appreciated.

Hi,
How are things going? I just want to check if the information provided was helpful. If there is any update or concern, please feel free to let us know.
Best Regards,
Aiden
If you have any feedback on our support, please click
here
Aiden Cao
TechNet Community Support

VDI 3.1 USB redirection doesn't work

Guys,
Having problems with USB Redirection on Windows XP image. I have installed SRWC Components on to the template - I can see utsrSession device, usb redirector icon comes up under system tray too. However, USB sticks doesn't work - checked uttsc logs on solaris box which reported as follows:
2009.12.01 16:48:39.388565 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:48:39.388612 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:48:39.388649 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:48:39.388678 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:48:39.388705 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:48:39.388720 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:48:39.388741 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:48:39.388757 EST detach_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:48:39.388804 EST fill_devinfo: term key not found
2009.12.01 16:49:03.559301 EST ut_usb_start: Starting usb: with debug_level: 1
2009.12.01 16:49:03.560447 EST device_event[term=IEEE802.00144fd6e070]: Ignoring device from unsupported RDD. Version string is: null
2009.12.01 16:49:03.560726 EST db_get_device[term=IEEE802.00144fd6e070]: No devid key
2009.12.01 16:49:03.560747 EST unit_event[term=IEEE802.00144fd6e070]: Device not found.
2009.12.01 16:49:03.560798 EST device_event[term=IEEE802.00144fd6e070]: Ignoring device from unsupported RDD. Version string is: null
Got customer to uninstall the SRWC components package and asked him to install just the USB Redirector (the one from the VDI 3.1 EA release).
uttsc logs now reporting that disks are OK.
bash-3.00# tail -f /var/opt/SUNWut/log/utstoraged.log
2009.11.30 16:46:03.610295 EST service END lun=0, ctlmin=1, uid=150000, xid=2
2009.11.30 16:46:14.549090 EST servicing /tmp/SUNWut/units/IEEE802.00144fd6e070/devices/usb@1/hub@1/USBest_TechnologyUSB_Mass_Storage_Device, lun=0, ctlmin=1, uid=150000, xid=2
2009.11.30 16:49:59.835905 EST service END lun=0, ctlmin=1, uid=150000, xid=2
2009.11.30 16:50:08.666330 EST servicing /tmp/SUNWut/units/IEEE802.00144fd6e070/devices/usb@1/hub@1/USBest_TechnologyUSB_Mass_Storage_Device, lun=0, ctlmin=1, uid=150000, xid=2
2009.11.30 16:52:08.312175 EST service END lun=0, ctlmin=1, uid=150000, xid=2
2009.12.01 16:49:28.440061 EST servicing /tmp/SUNWut/units/IEEE802.00144fd6e070/devices/usb@1/V68_____USB_2.0_________, lun=0, ctlmin=1, uid=150002, xid=3
2009.12.01 16:50:35.108629 EST service END lun=0, ctlmin=1, uid=150002, xid=3
Looks like this time it is seeing the disk correctly..still no USB device shown under My Computer !! Any thoughts??
Regards,
Hardik

Forgot to update the Forum.
Latest firmware did resolve the issue !!
Thanks & Regards.

.jar includes jdbc driver but doesn't work

Hi
I'm quite new with Java. I've just created my first app in java, it's some kind of CMS. I have to give to my friend who can only install JVM and I can't set up his computer, because he lives in other city. What's the problem then:
I tried to compile (build) complete file with jdbc driver. And actually I've done it (when I open jar with winrar I see that mysql-connector.jar is there) but it's not working. I still have error:
SQLException: com.mysql.jdbc.Driver
No suitable driver
08001
It works fine when I'm running it with NetBeans, but built jar doesn't work at all.
Please help me with this problem. I was searching in many forums for the same problem, but no one had it (I mean EXACTLY the same). I have had many problems already with adding connector to NetBeans project at the beginning, but finally I've done it after 2 days - reinstallation of NB solved the problem. Is it possible that's NB fault again?
Thx for any clues
Michael

Hello,
Try to include a Class-Path option in the Manifest of your jar and see if that works.
Hope this helps

Phone Redirection doesn´t work after Publishing

I published an alreday working Version of my Website with Muse. The Redirection to the Phone Resolution doesn´s work anymore, although all Pages are still in place in the phone directory. The Redirection worked yesterday after the first publishing of the phone Resolution, but after the publishing today, only the desktop sides are available.
the URL is www.la-moellmann.de (la-moellmann.businesscatalyst.com)
I solved the Problem by adding the Muse javascript Redirect-Script from a non-BC Site (via FTP):
<script type="text/javascript">
Muse.Redirect.redirect('desktop', '', 'phone/index.html', '');
</script>
Nachricht geändert durch adobe_mhcom

Hey Ch4rl3s3,
I would recommend that you try to restore the software on your iPhone as a troubleshooting step to see if the issue persists after that:
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Mac Remote desktop redirection doesn't work on 8.0.5

After the Microsoft Remote Desktop for MAC update on March 19th (8.0.5) folder redirection does not work properly. It worked fine on the 17th before the update. Please advise as some of my clients do use macs..
Updated: I need to specify that not working means. The drive redirects, but no folders show up at all. If i try to create a folder on the redirected drive we get an error 0X8000FFFF: CATASTROPHIC FAILURE. I have tried multiple usb drives, SD cards and more.
Even NTFS formatted usb drives will not work.
http://WrinkleFreeIT.com/

Hi,
Firstly, would you please provide us the log file after you reproduce the issue to see if we can find some clues.
In addition, please try to uninstall and reinstall the app.
Thanks.
Jeremy Wu
TechNet Community Support

Keyboard Driver Filter doesn't work in 6.0.2

We're aware that the NI Keyboard Driver Filter may cause the computer to hang in the middle of shutdown (Windows XP) if a USB keyboard is used, so we substituted a PS-2 keyboard. This worked fine.
Then, when we updated Lookout 6.0.1 to 6.0.2, making sure that the Keyboard Driver Filter was installed, we found that the Keyboard Driver Filter did not work. It was still possible for a user with a lower priority to reach the Task Manager by pressing Ctrl-Alt-Del.
We need to protect Lookout from being accidentally closed by users "playing" with the keyboard.
How do we get this function back?

I got something from R&D. The keyboard filter in Lookout 6.0.2 has some bugs, which cause it not to work and also some other unexpected problems. That means the filter in 6.0.2 doesn't work at all.
You'd better uninstall the whole Lookout 6.0.2 and then install it again without keyboard filter. After that, you need to install the keyboard filter shipped with DSC 8.0.1, which has fixed those bugs. See the attachment.
Sorry for inconvenience.
Ryan Shi
National Instruments
Attachments:
LVDSC.kbFilter.zip ‏307 KB

Ipad2 w/ 3G shows 'no service" and 3G doesn't work. What's wrong? I do have paid data . It does work on wifi

Why does iPad2 w/ 3G show "no service" ? I have available paid data. 3G doesn't work but wifi does work. It's been working until today. What's wrong?

Is cell data turned on? Are you out in the boonies somewhere where there is no cell service? Call your provider to see if they are having a service outage.

Redirect doesn't work

We have a page with a GO button (page 100) and are having problems redirecting to page 101 when the GO button is pressed and there is a condition on the redirect. Originally we had a condition dependent upon the value of a radio group but that didn't work. So we've replaced that first condition with the simple condition of 1=1 using the "VALUE OF ITEM IN EXPRESSION1=VALUE OF ITEM IN EXPRESSION2" feature. And it still doesn't work. We get an error which states:
ERR-1777: Page 100 provided no page to branch to. Please report this error to your application administrator
We surmised that HTML_DB probably needed an "alternative condition" regardless of whether our first condition (1=1) was always true so we made another condition to branch to Page 100 if 1=2 again using the "VALUE OF ITEM IN EXPRESSION1=VALUE OF ITEM IN EXPRESSION2". We still get the same error.
We've tried all the variations such as '1'='1' and '1'='2' for our conditions and that doesn't work either.
How do we get this redirect to work???

John,
When you use the condition type VALUE OF ITEM IN EXPRESSION1=VALUE OF ITEM IN EXPRESSION2 as you did, then HTML DB expects two item names, for example P1_SAL and P1_MAX. For the expressions 1=2 and 1=1, try the condition types SQL Expression or PL/SQL Expression.
Sergio

X4200M2 Java Redirection doesn't work

We recently received 4 servers. 1 server came with ILOM 1.0.1 (I think) and it was the first I set up. The Java redirection worked great! Ever since I upgraded to ILOM 1.1.1 the Java redirection has not worked. On shipping ILOM, when I chose 8 or 16 bit color, Safari had me download a jnlp file which when double-clicked, opened Java and prompted me for my ILOM password, etc. Since the upgrade to the newest version, when I click "Launch Redirection" (regardless of 8 or 16 bit) the ILOM's webserver hangs and it unresponsive. The only way I know how to get it to come back up is by pulling out the power plugs. How can I get Java redirection working again? Should I downgrade my ILOM and firmware?
Edit: I see that this is a known issue. Guess I'll wait for the next release...
Message was edited by:
aivey06

Hi,
I have the same issue with a X4100 M2 server, the only way to access the remote console is by writing directly the URL.
Where did you see is a known issue? I have some other problem like, for some reason, the letter 'b' is sent continuously

My hplaserjet 3200 printer won't work. Driver disk doesn't work also. help.

I had viruses on my computer, so I cleaned it out and reloaded windows xp3. But now it's not recognizing my printer, hplaserjet 3200. The driver disk will not work also. I tried downloading it online. I'm getting zip files. Once i unzip it, it's giving me an error message. Help.

Hello MimsZ,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Folder redirection doesn't work in DOS and other apps

We are redirecting my documents and some other locations.
If I open a dos window and cd c:\users\username\documents it does to a local directory not the redirected location. I can browse that same path in explorer. it seems to only be when I use the library and shortcuts in a "open" dialog that I see the folder redirection location.
A new application we are using saves the config file to "my docs\application\session"
I've saved the config file to the redirect my docs\application\session, but the application doesn't pull up with the config. I'm guessing its not using the correct environment variable to look for the config file. What is the correct environment variable that would recognize redirected folders?
thanks,jb
This topic first appeared in the Spiceworks Community

I'm having the same problem. It just started yesterday. My top row buttons were not working in SMS and Loopt. I did a reset. I did a restore. I removed all applications and restored to original factory settings and did not put my backed up information back on- still he same issue. The "messages" and "clear" buttons do not respond in SMS, but the screen responds in that location in all other applications and on the home screen. It definitely seems to be a software issue and not the screen itself.

New cd drive : itunes doesn't work with it now

I bought an external drive but when I use it in itunes to either play a cd or import a cd, it doesn't play or import them but skips through them then does nothing. Is there a setting I need to change to fix this? the cds work fine in windows media player.

Oh, sorry, I didn't read your original post correctly.
Yeah, you have to do something to let iTunes know the new drive is there. I don't know what, though!
However there are hardware whizzes over on Importing & Burning discussion who will know this backwards and forwards!

Terminal Services - drive redirection doesn't work.

Similar Messages

Maybe you are looking for