Terminal showing airport express not local IP

After upgrading to Mavericks, Terminal now shows "brians-airport-express:~Brian$" where it used to be "192:~ Brian$. Any solution besides doing a fresh install?

I'm sure there's a more elegant solution, but one workaround that comes to mind is to force the use of the IP address in the bash profile, which can be done with the following procedure, as just a couple of several ways:
1. Open the Terminal and run the following command to edit the bash profile:
pico ~/.bash_profile
2. Copy and paste one of the following lines into the profile:
PS1="`ipconfig getifaddr en1`:\W \u$ "
or...
HOSTNAME=`ipconfig getifaddr en1`
3. Press Control-O to save, followed by Control-X to exit (Control, and not Command)
Now when you open a new Bash shell, the profile will grab the current IP address (in this case for network port "en1," which is the default for WiFi), and use that in place of the hostname.

Similar Messages

Airport Express not showing name given

Hello Community,
I have the latest Airport Extreme and Airport Express. I am also using the latest Airport Utility, 6.0.
I am using the Airport Express to extend my network. However, under my Wi-Fi icon (upper right icon), I can not see the name given to my Airport Express. Therefore I can not manually select it. I can see it's name in iTunes, if I want to remotely play music and under "Network>Advanced" I can see it has the "same" name as my Extreme, but with an "AE" after the Extreme's name. Im sure that means Airport Express. Also, of course I can see the AE and the name given to it using Airport Utility.
Question, why is the name given to the Airport Express not showing up under my Wi-Fi ? I could have sworn when I first configured it, it showed up under the Wi-Fi drop down menu under "Other Devices", I believe it read.
I am running Lion, 10.7.3
Any help please ? Thank you in advance !

By the way, I set up the Airport Express wirelessly. Should I have connected it with an Ethernet to my Extreme to set the Express as an Extended network device ? Thanks !

Airport Express not seen in Airport Utility! PleaseHelp!

Airport Express not seen in Airport Utility! PleaseHelp!
Changing Utility version did not help.
I have successfully used my Airport Express 802.11n A1264 (1st gen.) to stream my iTunes music wireless to my living room stereo. Lately my Airport Express looses connection after every restart and does not show in the Airport Utility.
I run 10.6.8 on a Quad core Mac Pro. up to date on al software updates per 10.6.8 I use a 3rd gen. Airport Extreme 802.11n.
W.W.

I actually did this by myself not into the computer but a secondary Ethernet port on myTripple play Fios modem.
The Express showed up right away. I did the reset and set it up in the utilities to join my existing wireless network. I don't remember all steps but at some point it asked me to put in internet info, I did not, and then it asked me if I wanted the amber flashing stoped so I could use it to stream music. I clicked yes and the set-up finished with a green light. After I disconected the Ethernet cable, plugged in the Express in my living room stereo wireless, it has been working normal since. I restarted a few times, green came right back.
James since you had the right idea I gave you the 10 points. Thank you for being helpful.
Walter

Airport express not working since today's itunes update

Since updating iTunes today, Airport Express not working. More specifically, the Airport software will recognise the device exists, but iTunes cannot connect to it, just getting error message.

Ray Dio wrote:
Since updating iTunes today, Airport Express not working.
try this:
go system preferences > network > airport > advanced > TCP/IP and set *configure IPv6* to off. click on apply.
now have iTunes connect to the remote speaker again.
JGG

Airport Express (not n) with ethernet hub and as wireless base

Will Airport Express do this?
I've got a cable modem. It connects by ethernet to a hub. Airport Express (not n) connects to the hub by ethernet. My laptops (MacBook and HP 69xx WinXP Pro) connect to AX and internet just fine.
In that same hub, I want to connect a D-Link DNS323, which I wish to be made accessible to the wireless network provided by AX. Here's a sort-of diagram:
cable ethernet
modem ---> hub <--- Airport Express <--- laptops, AppleTV, etc. by wireless
^
|
|
D-Link
DNS 323
Can AX (old style, not n version) use its ethernet connector to both communicate with my cable modem and with other wired ethernet devices through my hub?
Thanks for helping. I tried searching for similar posts, but I failed to find an answer.

With only the hub, the NAS, and the express, you can't access both the internet and the NAS wirelessly at the same time. Here's why:
The AirPort Express has only one Ethernet port. That port can either act as a WAN port or a LAN port, but not both at the same time.
You need the Express to be connected to the internet. Unless you have another wireless router (Apple or otherwise), it will have to be connected through its Ethernet port. Therefore, the Ethernet port must act as a WAN port.
The NAS, on the other hand, is part of your network. For it to be connected, the port must act as a LAN port.
This means that the NAS can't be connected to the Express via Ethernet because then the port would need to act both as a LAN port and a WAN port, which it can't do.
This means you'll need an additional wireless router if you want to access both the internet and the NAS at the same time.
If you have another wireless router (it doesn't have to be an AirPort), I can help you configure it to work with your current network so that you can access the NAS.
Message was edited by: adsfushi72

Just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ??

just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ?

mickair wrote:
I have been experiencing some networking problems
Welcome to Apple's discussion groups.
I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
I use {the TC's} DHCP function ... to avoid unauthorized use.
This a discussion for another thread, but that's not what DHCP is for.
The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
The AEBS is currently setup as being a WDS Relay at the moment
Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
http://discussions.apple.com/thread.jspa?threadID=2273124
{The AE-Alpha} connects fine as WDS remote at the moment
I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
Physical location:
AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network.

While connecting airport express, the airport utilities shows airport express but no set up menu

trying to connect airport express for music streaming. already have time capsule. Airport utilities show airport express but no setup options at all.

What version of AirPort Utility do you have?
Please look on the side of the AirPort Express for the model number.....starts with an "A" followed by four numbers.......and post back with that info.

Airport Express not showing up

Noticed my aexpress was blinking amber today. We use it to stream music to speakers.
I tried to reset it and it still is blinking amber. It is not showing up in Airport Utility 5.6 at all.
It did a few minutes ago but when I went throught the set up process it said something was wrong (don't remember, it was
all a blur)
I am basically redoing my whole network. I have so much stuff I am trying to streamline:
I have a new Airport Extreme that I have ethernet to the cable modem.
I have iMac etherneted into that.
I then have a wireless printer (Canon) that is across the room working fine.
I have a HP Laser Printer I would also like to put across the room- was thinking of getting
or using this Airport Express for that and possibly getting another for the stereo.
I wish I could get some good advice on what to do.
I also have a Weather station that uses ethernet but it 'buzzes' and I was hoping to somehow put that in another room (i have one of those
ethernet over electrical plug thingies but does not seem to work for that) AND
a VOIP phone
After all that I still have 2 usb hard drives.
ahhhhhhhhh networking gods help me.

It may just be possible that the AirPort Express Base Station (AX) is just a bit "out of sorts." I would suggest that you perform a "hard" or "factory default" reset on it to see if this gets it working properly again.

Older Airport Express not showing up in Windows AirportUtility

I haver an older Airport Express, the kind that plugs right into an outlet. It's plugged into ethernet, I'm trying to use it to set up a second home network and use it for Airplay. It's too old to use Airport Utility on any of my Apple devices, but I have AU on a windows laptop to set it up. I bought it off of eBay, so after I first plugged it in I used AU on the Windows machine to reset the ApExp to factory defaults, just to zero out any old user settings. The problme is that since then, AU cannot find the ApExp!!
If I look in Wifi settings on my iPhone or iPad it displays the ApExp, and selecting it gives me the error that it cannot be set up with this software (because it's too old), just like before... but now, when I open AU the ApExp doesn't even show up! Even on the Windows machine, no Airport devices are found. The ApEx is plugged in correctly, and displays a flashing orange light, it has just completely vanished from Airport Utility... what's going on here??

If you decide to keep the new AirPort Extreme, you will need a newer "n" version of the AirPort Express if you want to try to extend the network using wireless only.
A "refurbished" Model A1264 would work, but it will only extend one band from your dual band AirPort Extreme.
A "new" Express, Model A1394 would be recommended since it will extend both bands.
You do have the option to use the old AirPort Express, but that would involve using a permanent wired Ethernet connection between the AirPort Extreme and AirPort Express.
Unfortunately, it is not possible to predict wireless performance in advance when the signal must pass through numerous walls and or a ceiling. For that reason, it would be a good idea to understand the store's return policy in advance if you want to try a new or refurbished Express.

Wired AirPort Express not showing in AirPort Utility or iTunes

So I was using my two AirPort Express's to wirelessly play iTunes throughout the house. Recently I wired the house with Cat6 and decided to wire in the AXs for more reliability. My AXs are 1st gen and are running 7.6.1. The problem is, when I turned the wireless off on them, they no longer show up in AirPort Utility or iTunes. I can get them to show in utility by selecting "Configure Other" then manually entering their IP address and password, but that's the only way and they never show in iTunes and disappear from Utility once I "Update". They are wired to a Gigabit switch which is wired to a Netgear router.
Some additional Info:
Green light is on and solid
I can ping them and connect manually
"Connect using ethernet" is set
Connection sharing "Off (Bridge Mode)" is set
I also want to extend my wireless range with them, so I've mirrored my wireless settings and used "Create a wireless network" (tried without doing this as well without luck)
Enable AirPlay is checked
Netgear WNDR3700v2 Router Firmware version 1.0.0.36
Keebox SGE08 Gigabit Ethernet Switch
Windows 7 Home Premium SP1 x64
Any idea why I can't see or use them in iTunes and AirPort Utility?
Thanks!
-Jake

I wish that I could help you. I'm having a similar problem, but wireless.
A couple months ago, my two Airport Expresses and my Apple TV disappeared from iTunes AirPlay. When I ran the Airport Utility, the Airports and Apple TV could not be located. Interestingly, the Airports displayed a green light and all iDevices (iPod Touches and iPads) could connect to the Airports via AirPlay. Like wise, Airport Utility on the iDevices located the Airports. So I connected an Airport to the router via a Ethernet cable. Once connected via wire and after a hard reset (with an orange light displayed) the Airport Utility found the wire-connected Airport. I ran the utility to set up the Airport and a green light came on. Then the wire-connected Airport was visible on iTunes AirPlay. So I unplugged the Airplay and returned it to the stereo. The green light came on, but now neither iTunes not the computer based Airport Utility could find it, even though the iDevices could. I repeated this process expecting a different outcome enough times to be certified insane.
So as I sit my computer based (Windows Vista) Airport Utility and computer based iTunes (the new version) cannot locate the Airport Expresses even though the iDevices readily see them. And their green lights display a connection to the network.
I even tried a forced connection by pasting the Airport's IP address (obtained using Airport Utility on iPad) into the manual configuration of the Airport Utility on the computer. Oddly, once the IP address was entered, the computer based Airport Utility could see the specs of the Airport Express. But when I tried to save or conclude the Computer based Airport Utility configuration, I got an error.
Another odd thing is that the Remote App on my iDevices no longer works either. I can no longer connect to my iTunes library. The remote simply can't find my Library at all. (I confirmed that Home Sharing is on). But I noted that in iTunes is indicated that four devices work connected or linked to the Library. So I had iTunes "forget" the devices "connected" for Remote and tried to reconnect. I got the number could on the iDevise but the devise never appeared in iTunes Devises for selection.
So whatever problem is preventing iTunes from locating my Airport, is also blocking my iDevises from connecting to iTunes. Meanwhile, my iDevises can sync with iTunes (while wired - I never tried a wireless sync) and can connect via AirPlay to all Airports.
I've researched this for months and found nothing to work. I'm frustrated to the point of doing something drastic like dumping iTunes and finding some other player to manage my music and stream to my stereos. I'd rather not but the vast majority of my Library can't be played over my stereo.

Airport utility 6.3.2 not showing airport express

Hello
Ive just updated to OSX Mavricks on MBP 13" (early 2011) and i noticed a problem. in Airport Utility 6.3.2 it is not showing my Airport Express
on my ipad i can see and access my AE but not on my mackbook. the internet works but normally where there is the AE is just a spinning wheel.
Ive tried everything i can think of and googled and searched the forum here. i cant even find the version it say i have to reinstall the app to see if maybe
that works. ive repaired permissions etc.
Any ideas?
Thanks
Jay C

Hi,
exactly the same with me. On MacBook Pro AU (version 6.3.2) is unable to find the AirPort Extreme (firmware 7.6.4). My iPhone 4S, however, shows the base station as expected. Googled, reset, unplugged, I tried everything I could but without any luck... The strangest thing is that it was working fine for a while, but not anymore. WiFi connection works seamleaslly. I'm indeed a bit dissatisfied.
Should anyone point us to a direction, I would pay a beer for him/her
Szabolcs

Is it normal for airport express not to show up in utility when extending a network?

Hi, with the help of this community, I think I successfully extended my wifi network by using airport expresses, connected to my time capsule, via my houses electrical system (via powerline adaptors), which ultimately connect via an RJ45 cable to the airport express. I tried to do it all with the same netwrok, so I do not need to switch to different networks when I move about the house.
I think it works because my signal strenght is much stronger than before I added the powerline adaptors. So, why am I back here?, two things. First is I want to make sure I did this all correctly, as I am adding a few more of these powerline adapters as they have really changed my wireless experiences.
What should the internet setting be on the time capsule and airport expresses. I have it set the "connection" to off (bridge mode) on the TC and the express units. But the express units blink yellow and says there is a NAT/DHCP error. something about the time capsule rejecting the sharing? so I chnage the TC to share a public address and the express to off (bridge mode), and I think this works.
But when I do this, none of the express units show up in the utility anymore. Should I just take it as a blessing that it seems to be working, and not mess with it?
What should all the setting be? I am sure that I should be able to see all the units in the utility.
Thanks if this makes any sense to you.

But when I do this, none of the express units show up in the utility anymore. Should I just take it as a blessing that it seems to be working, and not mess with it?
Did you power cycle the entire network to get things in proper sequence?
If not, power off everything....all devices....order is not important
Wait a few minutes
Power up the modem first and let it run a moment or two
Power up the Time Capsule the same way
Power up the powerline devices
Power up each Express one at a time
Power up other devices one at at time
What should the internet setting be on the time capsule and airport expresses.
The setting on the Time Capsule will depend on the type of modem that you have connected. It sounds like the "Share a public IP address" would be correct for the Time Capsule. Everything else must be in "Bridge Mode"
Each of the AirPort Express devices must be configured to "Create a wireless network" using the same wireless network name, security setting and password as the Time Capsule network. Set the Channels as "Automatic" and double check as the last configuration step to make sure that they are set for Bridge Mode.
Then restart the entire network as outlined above and you are in business.
The Express devices should definitely show up in AirPort Utility when you have everything set up.

Second AirPort Express not showing up in AirPort Utility

I got a second AirPort Express (APE) to extend my wireless in a different direction from the first but I have not been able to get the new one to show up in the AirPort Utility.
Here are some of the things that I have tried based on my research so far:
-Unplugged APE and waited 30 seconds then plugged it back in
-Pressed reset button untill light blinked, this caused the light to stay solid amber for several seconds then it started slowly blinking again
-Plugged in to Time Capsule with cable, this allowed me to configure the second APE but once I disconnected the cable it still would not connect wirelessly
-Disconected the first APE and "forgot" it in the AirPort Utility, still not able to set up 2nd APE
Did I get a bad unit?

Answering my own post ...
I first directly connected the AX to the iMac using the ethernet cable, and was able to configure the AX (not sure that I actually had to do this, as my issue was probably due to poor signal strength - as described later). I then moved the AX back to the living room, and was able to connect again, but soon it was dropped. Determined that the signal was weak. I played with positioning the AX to optimize signal, and now am able to get OK signal (only about 1/3 strength, based on number of bars in "fan" shaped icon in menu bar). Was able to stream iTunes to stereo as well, which is great. Also determined that the 2WIRE system that Airport was trying to set up WAS my neighbor (and not my gateway/router). If you don't see "Apple XXXXX" base station and network listed when you are in Airport Admin Utility or Internet Connect (which I didn't, but since I was using 2WIRE gateway/router, assumed that it was my AX when the 2WIRE appeared in the Airport network connection option), then the AX is not properly set up (weak signal or other problem).
So, with the AX in the living room (front of the house), and the iMac in the sun room (back of the house), I am able to get OK, but not great signal from AX. So far, seems to be sufficient to connect to internet and stream iTunes. I may see if I can reposition the AX on the other side of the living room wall, but that will then require running a long cable to connect to the stereo.
Bottom line: 50ft. range of AX may be reduced when used in old (1920's era) houses (thick, plaster walls). Actual distance between AX and iMac is probably 30-40 feet, though they are separated by at least 3-4 walls. If repositioning to other side of wall doesn't do the trick, I may need to step up to Extreme.
I hope this helps others that might have similar problems.

Airport Express Not Showing up in Admin Utility

Have an Intel iMac, and tried to set up AX yesterday. Using SBC DSL internet connection (2-wire system). Plugged phone line into 2-wire router, ethernet cable between router and AX, powered both up. Router shows 3 green lights, indicating that everything is "good." Likewise, AX shows up with a green light. On the iMac, I never got the generic "Airport Express Network" or anything, but did have 2WIRE381 recognized (presumably as my AX network). I am able to connect to the 2WIRE381, and show a strong signal. However, I cannot connect to the internet, nor can I configure AX via the the Admin Utility (nothing shows up). I've tried both soft and hard resets, powering off the router, restarting the iMac, ... nothing seems to work. AX also not visible in iTunes (since no internet connection).
Any thoughts? One thought that I had ... is it possible that I am picking up a neighbor's signal, and that is why I can't configure it? My AX is about 30-40 feet away (single level house, 1200 sqft.) with probably 3-4 walls between AX and iMac.
Any ideas/suggestions greatly appreciated.

Answering my own post ...
I first directly connected the AX to the iMac using the ethernet cable, and was able to configure the AX (not sure that I actually had to do this, as my issue was probably due to poor signal strength - as described later). I then moved the AX back to the living room, and was able to connect again, but soon it was dropped. Determined that the signal was weak. I played with positioning the AX to optimize signal, and now am able to get OK signal (only about 1/3 strength, based on number of bars in "fan" shaped icon in menu bar). Was able to stream iTunes to stereo as well, which is great. Also determined that the 2WIRE system that Airport was trying to set up WAS my neighbor (and not my gateway/router). If you don't see "Apple XXXXX" base station and network listed when you are in Airport Admin Utility or Internet Connect (which I didn't, but since I was using 2WIRE gateway/router, assumed that it was my AX when the 2WIRE appeared in the Airport network connection option), then the AX is not properly set up (weak signal or other problem).
So, with the AX in the living room (front of the house), and the iMac in the sun room (back of the house), I am able to get OK, but not great signal from AX. So far, seems to be sufficient to connect to internet and stream iTunes. I may see if I can reposition the AX on the other side of the living room wall, but that will then require running a long cable to connect to the stereo.
Bottom line: 50ft. range of AX may be reduced when used in old (1920's era) houses (thick, plaster walls). Actual distance between AX and iMac is probably 30-40 feet, though they are separated by at least 3-4 walls. If repositioning to other side of wall doesn't do the trick, I may need to step up to Extreme.
I hope this helps others that might have similar problems.

AirPort Express Not Showing as Option for Playback

I have an AirPort Express (new with latest firmware) connected to my Wireless LAN (802.11g). Both of my computers can see it (that is, I can access it from the configuration utility), however, when I load iTunes it will not show as a playback option (pulldown on bottom of iTunes screen) on one computer, unless I first ping the IP of the AirPort. Sometimes this works, sometimes not. Note that iTunes is not loaded on the other computer at the time and I do not have a firewall between the computers on the LAN. I am using WEP encryption, but I've entered the key successfully on both computers and on the AirPort. I've also opened the specified port (5353?) on my router, although that shouldn't matter, as I'm not trying to route outside my LAN.
As mentioned I have latest AirPort firmware and iTunes upgrades loaded on both Windows XP computers, as well as SP2.
Ideas or suggestions?
Various - Mac & Windows XP Windows XP Pro Windows XP can't find AirPort
Various - Mac & Windows XP Windows XP Pro

i assume your airport extreme base station (AEBS) is you main router and you want the airport express (AX) join the network provided by the AEBS.
you could try this:
unplug and re-plug the airport express (AX), then click on the airport icon in your menu bar. you should see something like "Apple network bj1234567" or similar (it may take a little while for it to show up). in order to set up the express, you will have to temporarily join its network ! you will get a message asking +do you really want to switch networks ?+ and you do want to do that.
launch airport utility (AU). you should see the AX on the left. click on the icon of the AX once to highlight it and click continue. follow onscreen instructions and, when prompted, choose to +join an existing network+ and enter the required information for your network.
any help ?

Terminal showing airport express not local IP

Similar Messages

Maybe you are looking for