Terminal

ok guys,
I'm not new to macs but don't use terminal very much. Just got my new i7 and opened terminal. I entered ' smartctl -a /dev/sdX | grep LoadCycleCount ' hoping to find out how many cycles my hard drive has registered not knowing if the command was valid or not. I was prompted for my password which also said to exit ( not give the command ) type a short string of words ( Can't remember ) I tried to enter the string but couldn't. Then decided to close the window but a window popped up asking if i wanted to quit everything. I hit enter, and all seemed well, but when I opened another window in terminal I have nothing but a prompt, and can't give any commands.....tried ' sudo periodic daily weekly monthly ' and there is no response. My computer seems fine, but afraid I locked myself out of terminal.
Sure I know don't screw around with terminal unless you know what your doing, so let's not go there. I'm looking for advice trying to see if I can give a simple command like running cron, and if I can't is there a way I can go back to default.
Thanks a lot...
Message was edited by: Suba

I didn't download any software before issuing the command, and didn't use migration assistant. I can't see any other problems at this point other than being locked out of terminal. I know this might be impossible to trouble shoot over the net. The command wasn't given because I never typed my password.
Come to think of it I must have pulled that command off a windows site. I've got to quit staying up so late : ) Here's the link where i got the command. It's about half way down the page. If anyone's brave enough to copy the command to terminal, let me know what happens when you decline to enter your password ( assuming you decline ) If it's an invalid command ( which I believe it was ) nothing should happen. I clicked the window closed because I couldn't type ctrl+C like I was instructed to do.
http://ubuntuforums.org/showthread.php?t=805570&page=32
Message was edited by: Suba
Message was edited by: Suba

Similar Messages

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
== This happened ==
Every time Firefox opened
== I tried to update firefox add-ons ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

Try a new profile. See [[Recovering important data from an old profile]]

Closing Terminal window tabs shrinks Terminal window height

Open a Terminal window, press Command-T to create a tab, and then Ctrl-D to close that new tab, the Terminal window height decreases by one row.
This most certainly appears to be a bug. How do I report this to Apple?

I am also experiencing this problem, however if you use the Basic setting the problem doesn't exist.
I am using Novel and I have the problem. It's quite annoying.
I noticed that if you set the fontsize to 12 then this problem exhibits, however if I change the size to 11pt or 10pt (10 is the default for Basic, 12 is default for Novel) then I don't have the bug.
Message was edited by: TonyKL

Report gets cancelled or terminated after eight hours

While doing load testing of reports, all of my reports got cancelled or terminated after eight hours. I bang the report server and database with 30 long running reports using RWCGI60. The rwcgi60/showmyjobs shows that all are running for 8 hours and after that boom... all gets cancelled one by one with in a five minute period. I still see the SQL session activity on database. The report server log says the server engines are crashed one after the other. I have Maxengine set to 15. When I submit 30 reports I see 15 running and 15 enqueued.
Is there any timeout parameter set on RWCGI60 where by it lost contact of database? RWCLI60 works fine and finished all reports.
Thanks and Please let me know if you further information...

Hi
The timeout is a seeting in http server on which you host Reports CGI. Once that time limit is reached and no output is written, the web server would time out for that request. Reports CGI does not have any timeout parameter property.
Thanks
Rohit

Mail keeps crashing and app store and terminal and wont open in Mavericks

Help!
Ever since I installed Mavericks last week, Mail keeps crashing with the following error message below. The App Store and Terminal also refuse to open, please can someone help?
Process:         Mail [832]
Path:            /Applications/Mail.app/Contents/MacOS/Mail
Identifier:      com.apple.mail
Version:         7.0 (1816)
Build Info:      Mail-1816000000000000~1
Code Type:       X86-64 (Native)
Parent Process: launchd [143]
Responsible:     Mail [832]
User ID:         501
Date/Time:       2013-10-26 19:09:16.302 +0100
OS Version:      Mac OS X 10.9 (13A603)
Report Version: 11
Anonymous UUID: 1C21170D-FD0C-73AA-D36C-0A7DDD3092F3
Sleep/Wake UUID: B7214CB9-92CE-4F2B-8D01-D47FE2EF1F97
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInternalInconsistencyException', reason: '-[NSViewController loadView] could not load the "MessageView" nib.'
abort() called
terminating with uncaught exception of type NSException
Application Specific Backtrace 1:
0   CoreFoundation                      0x00007fff8bbc441c __exceptionPreprocess + 172
1   libobjc.A.dylib                     0x00007fff8a253e75 objc_exception_throw + 43
2   CoreFoundation                      0x00007fff8bbc42cc +[NSException raise:format:] + 204
3   AppKit                              0x00007fff898b7507 -[NSViewController loadView] + 361
4   AppKit                              0x00007fff897e5748 -[NSViewController view] + 41
5   Mail                                0x000000010cb7264f Mail + 370255
6   Mail                                0x000000010cb72512 Mail + 369938
7   Mail                                0x000000010cb7214e Mail + 368974
8   Mail                                0x000000010cb71e27 Mail + 368167
9   Mail                                0x000000010cb7182d Mail + 366637
10 AppKit                              0x00007fff898a526b -[NSView _updateSuggestedContentRect] + 774
11 AppKit                              0x00007fff898b3df1 -[NSView _updateSuggestedContentRectForVisibleRectChange] + 219
12 AppKit                              0x00007fff898b3c87 -[NSScrollView(NSRulerSupport) _handleBoundsChangeForSubview:] + 331
13 AppKit                              0x00007fff898b3af4 -[NSView _postBoundsChangeNotification] + 136
14 AppKit                              0x00007fff898b3938 -[NSView translateOriginToPoint:] + 294
15 AppKit                              0x00007fff8975ac7f -[NSClipView _immediateScrollToPoint:] + 2659
16 AppKit                              0x00007fff8975a1da -[NSClipView scrollToPoint:] + 237
17 AppKit                              0x00007fff898b2d8e -[NSScrollView scrollClipView:toPoint:] + 203
18 AppKit                              0x00007fff8975ee39 -[NSClipView _scrollTo:animateScroll:flashScrollerKnobs:] + 1688
19 AppKit                              0x00007fff8975e5bf -[NSClipView _reflectDocumentViewFrameChange] + 128
20 AppKit                              0x00007fff89722f3c -[NSView _postFrameChangeNotification] + 203
21 AppKit                              0x00007fff8972c712 -[NSView setFrameSize:] + 1586
22 Mail                                0x000000010cb38ac4 Mail + 133828
23 AppKit                              0x00007fff8972c099 -[NSView setFrame:] + 294
24 Mail                                0x000000010cb6bc6a Mail + 343146
25 Mail                                0x000000010cb71007 Mail + 364551
26 Mail                                0x000000010cb70e36 Mail + 364086
27 Mail                                0x000000010cb6fcfd Mail + 359677
28 Mail                                0x000000010cb37db0 Mail + 130480
29 Foundation                          0x00007fff8a676c18 NSKeyValueNotifyObserver + 387
30 Foundation                          0x00007fff8a6b3e71 -[NSObject(NSKeyValueObservingPrivate) _notifyObserversForKeyPath:change:] + 1115
31 AppKit                              0x00007fff8977dc48 -[NSController _notifyObserversForKeyPath:change:] + 209
32 AppKit                              0x00007fff898af6a7 -[NSArrayController didChangeValuesForArrangedKeys:objectKeys:indexKeys:] + 53
33 AppKit                              0x00007fff8977da88 -[NSArrayController setContent:] + 826
34 Mail                                0x000000010cb359a3 Mail + 121251
35 Foundation                          0x00007fff8a6b46ce -[NSObject(NSKeyValueCoding) setValue:forKey:] + 389
36 AppKit                              0x00007fff89786f5d -[NSObjectParameterBinder _updateObject:observedController:observedKeyPath:context:] + 1298
37 AppKit                              0x00007fff8977df68 -[NSObject(NSKeyValueBindingCreation) bind:toObject:withKeyPath:options:] + 652
38 Mail                                0x000000010cb88d6e Mail + 462190
39 CoreFoundation                      0x00007fff8bb92fcc __CFNOTIFICATIONCENTER_IS_CALLING_OUT_TO_AN_OBSERVER__ + 12
40 CoreFoundation                      0x00007fff8ba86c5d _CFXNotificationPost + 2893
41 Foundation                          0x00007fff8a6704aa -[NSNotificationCenter postNotificationName:object:userInfo:] + 68
42 Foundation                          0x00007fff8a696055 -[NSBlockOperation main] + 75
43 Foundation                          0x00007fff8a675591 -[__NSOperationInternal _start:] + 631
44 Foundation                          0x00007fff8a67523b __NSOQSchedule_f + 64
45 libdispatch.dylib                   0x00007fff8ac8e2ad _dispatch_client_callout + 8
46 libdispatch.dylib                   0x00007fff8ac95f03 _dispatch_main_queue_callback_4CF + 333
47 CoreFoundation                      0x00007fff8bb2b839 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 9
48 CoreFoundation                      0x00007fff8bae6b14 __CFRunLoopRun + 1636
49 CoreFoundation                      0x00007fff8bae6275 CFRunLoopRunSpecific + 309
50 HIToolbox                           0x00007fff8f7fef0d RunCurrentEventLoopInMode + 226
51 HIToolbox                           0x00007fff8f7fecb7 ReceiveNextEventCommon + 479
52 HIToolbox                           0x00007fff8f7feabc _BlockUntilNextEventMatchingListInModeWithFilter + 65
53 AppKit                              0x00007fff896f528e _DPSNextEvent + 1434
54 AppKit                              0x00007fff896f48db -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
55 AppKit                              0x00007fff896e89cc -[NSApplication run] + 553
56 AppKit                              0x00007fff896d3803 NSApplicationMain + 940
57 libdyld.dylib                       0x00007fff8b9265fd start + 1
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib                  0x00007fff8efa9866 __pthread_kill + 10
1   libsystem_pthread.dylib                 0x00007fff9282635c pthread_kill + 92
2   libsystem_c.dylib                       0x00007fff8af03bba abort + 125
3   libc++abi.dylib                         0x00007fff8d3c9141 abort_message + 257
4   libc++abi.dylib                         0x00007fff8d3eeabc default_terminate_handler() + 264
5   libobjc.A.dylib                         0x00007fff8a25430d _objc_terminate() + 103
6   libc++abi.dylib                         0x00007fff8d3ec3e1 std::__terminate(void (*)()) + 8
7   libc++abi.dylib                         0x00007fff8d3ec456 std::terminate() + 54
8   libobjc.A.dylib                         0x00007fff8a2540b0 objc_terminate + 9
9   libdispatch.dylib                       0x00007fff8ac8e2c1 _dispatch_client_callout + 28
10 libdispatch.dylib                       0x00007fff8ac95f03 _dispatch_main_queue_callback_4CF + 333
11 com.apple.CoreFoundation                0x00007fff8bb2b839 __CFRUNLOOP_IS_SERVICING_THE_MAIN_DISPATCH_QUEUE__ + 9
12 com.apple.CoreFoundation                0x00007fff8bae6b14 __CFRunLoopRun + 1636
13 com.apple.CoreFoundation                0x00007fff8bae6275 CFRunLoopRunSpecific + 309
14 com.apple.HIToolbox                     0x00007fff8f7fef0d RunCurrentEventLoopInMode + 226
15 com.apple.HIToolbox                     0x00007fff8f7fecb7 ReceiveNextEventCommon + 479
16 com.apple.HIToolbox                     0x00007fff8f7feabc _BlockUntilNextEventMatchingListInModeWithFilter + 65
17 com.apple.AppKit                        0x00007fff896f528e _DPSNextEvent + 1434
18 com.apple.AppKit                        0x00007fff896f48db -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
19 com.apple.AppKit                        0x00007fff896e89cc -[NSApplication run] + 553
20 com.apple.AppKit                        0x00007fff896d3803 NSApplicationMain + 940
21 libdyld.dylib                           0x00007fff8b9265fd start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x00007fff8efaa662 kevent64 + 10
1   libdispatch.dylib                       0x00007fff8ac9043d _dispatch_mgr_invoke + 239
2   libdispatch.dylib                       0x00007fff8ac90152 _dispatch_mgr_thread + 52
Thread 2:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 3:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 4:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 5:
0   libsystem_pthread.dylib                 0x00007fff92829fac start_wqthread + 0
Thread 6:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 7:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 8:: +[MFLibrary synchronouslyUpdateMessageFiles] Dispatch queue: NSOperationQueue 0x6000002223c0
0   libsystem_kernel.dylib                  0x00007fff8efaa9f2 read + 10
1   com.apple.Foundation                    0x00007fff8a68118a _NSReadFromFileDescriptorWithProgress + 255
2   com.apple.Foundation                    0x00007fff8a6deba4 -[NSConcreteFileHandle readDataOfLength:] + 257
3   com.apple.Mail.framework                0x00007fff8e206d71 +[MFLibrary _emlxPListInFile:plistOffset:] + 51
4   com.apple.Mail.framework                0x00007fff8e200c17 +[MFLibrary updateFileForMessage:] + 180
5   com.apple.CoreFoundation                0x00007fff8bb0cd06 __53-[__NSArrayI enumerateObjectsWithOptions:usingBlock:]_block_invoke + 70
6   com.apple.CoreFoundation                0x00007fff8bb0cc50 -[__NSArrayI enumerateObjectsWithOptions:usingBlock:] + 320
7   com.apple.Mail.framework                0x00007fff8e1e3914 +[MFLibrary synchronouslyUpdateMessageFiles] + 503
8   com.apple.CoreFoundation                0x00007fff8baafdec __invoking___ + 140
9   com.apple.CoreFoundation                0x00007fff8baafc54 -[NSInvocation invoke] + 308
10 com.apple.MailCore                      0x00007fff8b175b74 -[MCMonitoredInvocation invoke] + 211
11 com.apple.MailCore                      0x00007fff8b198808 -[MCThrowingInvocationOperation main] + 40
12 com.apple.MailCore                      0x00007fff8b13cf08 -[_MCInvocationOperation main] + 332
13 com.apple.Foundation                    0x00007fff8a675591 -[__NSOperationInternal _start:] + 631
14 com.apple.Foundation                    0x00007fff8a67523b __NSOQSchedule_f + 64
15 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
16 libdispatch.dylib                       0x00007fff8ac927ff _dispatch_async_redirect_invoke + 154
17 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
18 libdispatch.dylib                       0x00007fff8ac9009e _dispatch_root_queue_drain + 326
19 libdispatch.dylib                       0x00007fff8ac91193 _dispatch_worker_thread2 + 40
20 libsystem_pthread.dylib                 0x00007fff92826ef8 _pthread_wqthread + 314
21 libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 9:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 10:: -[MFSnippetManager _calculateSnippetForMessages] Dispatch queue: NSOperationQueue Serial Queue
0   libsystem_kernel.dylib                  0x00007fff8efaa9f2 read + 10
1   com.apple.Foundation                    0x00007fff8a68118a _NSReadFromFileDescriptorWithProgress + 255
2   com.apple.Foundation                    0x00007fff8a680f3b _NSReadBytesFromFileWithExtendedAttributes + 888
3   com.apple.Foundation                    0x00007fff8a680b37 -[NSData(NSData) initWithContentsOfFile:] + 91
4   com.apple.Foundation                    0x00007fff8a6e3c6c +[NSData(NSData) dataWithContentsOfFile:] + 43
5   com.apple.Mail.framework                0x00007fff8e206f16 +[MFLibrary bodyDataAtPath:headerData:] + 49
6   com.apple.Mail.framework                0x00007fff8e20737d +[MFLibrary bodyDataForMessage:andHeaderDataIfReadilyAvailable:] + 58
7   com.apple.Mail.framework                0x00007fff8e2940c0 -[MFMessageStore bodyDataForMessage:fetchIfNotAvailable:allowPartial:] + 287
8   com.apple.MailCore                      0x00007fff8b16e901 -[MCMimePart(MessageSupport) parseMimeBodyFetchIfNotAvailable:allowPartial:] + 141
9   com.apple.Mail.framework                0x00007fff8e2966be -[MFMessageStore _fetchBodyForMessage:fetchIfNotAvailable:updateFlags:allowPartial:] + 154
10 com.apple.Mail.framework                0x00007fff8e294326 -[MFMessageStore bodyForMessage:fetchIfNotAvailable:updateFlags:allowPartial:] + 156
11 com.apple.Mail.framework                0x00007fff8e2de12d __48-[MFSnippetManager _calculateSnippetForMessages]_block_invoke + 363
12 com.apple.CoreFoundation                0x00007fff8bb01a1f __65-[__NSDictionaryM enumerateKeysAndObjectsWithOptions:usingBlock:]_block_invoke + 111
13 com.apple.CoreFoundation                0x00007fff8bb0192e -[__NSDictionaryM enumerateKeysAndObjectsWithOptions:usingBlock:] + 222
14 com.apple.Mail.framework                0x00007fff8e2ddfa2 -[MFSnippetManager _calculateSnippetForMessages] + 287
15 com.apple.CoreFoundation                0x00007fff8baafdec __invoking___ + 140
16 com.apple.CoreFoundation                0x00007fff8baafc54 -[NSInvocation invoke] + 308
17 com.apple.MailCore                      0x00007fff8b198808 -[MCThrowingInvocationOperation main] + 40
18 com.apple.MailCore                      0x00007fff8b13cf08 -[_MCInvocationOperation main] + 332
19 com.apple.Foundation                    0x00007fff8a675591 -[__NSOperationInternal _start:] + 631
20 com.apple.Foundation                    0x00007fff8a67523b __NSOQSchedule_f + 64
21 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
22 libdispatch.dylib                       0x00007fff8ac9068f _dispatch_queue_drain + 451
23 libdispatch.dylib                       0x00007fff8ac919dd _dispatch_queue_invoke + 110
24 libdispatch.dylib                       0x00007fff8ac8ffa3 _dispatch_root_queue_drain + 75
25 libdispatch.dylib                       0x00007fff8ac91193 _dispatch_worker_thread2 + 40
26 libsystem_pthread.dylib                 0x00007fff92826ef8 _pthread_wqthread + 314
27 libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 11:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 12:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 13:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 14:: Dispatch queue: [MFLibrary writeQueue]
0   libsystem_kernel.dylib                  0x00007fff8efaa962 pread + 10
1   libsqlite3.dylib                        0x00007fff921cf1d4 unixRead + 100
2   libsqlite3.dylib                        0x00007fff921f55ee readDbPage + 478
3   libsqlite3.dylib                        0x00007fff921f418d sqlite3PagerAcquire + 349
4   libsqlite3.dylib                        0x00007fff922298f7 sqlite3BtreeMovetoUnpacked + 1143
5   libsqlite3.dylib                        0x00007fff9220f8c4 sqlite3VdbeExec + 5236
6   libsqlite3.dylib                        0x00007fff9220d40a sqlite3_step + 666
7   com.apple.Mail.framework                0x00007fff8e1e4392 setFlagsForMessage + 448
8   com.apple.Mail.framework                0x00007fff8e1e4125 __83+[MFLibrary commitSynchronouslyPostingMessages:postFlags:postingOldFlagsByMessage:]_block_i nvoke + 210
9   com.apple.Mail.framework                0x00007fff8e2109e5 +[MFLibrary executeBlock:isWriter:useTransaction:isPrivileged:] + 1328
10 com.apple.Mail.framework                0x00007fff8e1e3f16 +[MFLibrary commitSynchronouslyPostingMessages:postFlags:postingOldFlagsByMessage:] + 644
11 com.apple.Mail.framework                0x00007fff8e229303 __59-[MFLibraryStore async_setFlagsFromDictionary:forMessages:]_block_invoke + 435
12 com.apple.Foundation                    0x00007fff8a696055 -[NSBlockOperation main] + 75
13 com.apple.MailCore                      0x00007fff8b198564 -[MCTaskOperation main] + 642
14 com.apple.Foundation                    0x00007fff8a675591 -[__NSOperationInternal _start:] + 631
15 com.apple.Foundation                    0x00007fff8a67523b __NSOQSchedule_f + 64
16 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
17 libdispatch.dylib                       0x00007fff8ac927ff _dispatch_async_redirect_invoke + 154
18 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
19 libdispatch.dylib                       0x00007fff8ac9009e _dispatch_root_queue_drain + 326
20 libdispatch.dylib                       0x00007fff8ac91193 _dispatch_worker_thread2 + 40
21 libsystem_pthread.dylib                 0x00007fff92826ef8 _pthread_wqthread + 314
22 libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 15:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 16:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 17:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 18:: -[MFLibraryIMAPStore openSynchronously] Dispatch queue: NSOperationQueue 0x60800023da00
0   libsystem_kernel.dylib                  0x00007fff8efa9716 __psynch_cvwait + 10
1   libsystem_pthread.dylib                 0x00007fff92827c77 _pthread_cond_wait + 787
2   com.apple.Foundation                    0x00007fff8a6d7ae0 -[__NSOperationInternal _waitUntilFinishedOrTimeout:outer:] + 218
3   com.apple.IMAP                          0x00007fff909d0fc0 -[IMAPClientOperationQueue waitUntilOperationIsFinished:] + 228
4   com.apple.IMAP                          0x00007fff909eafa1 -[IMAPGateway waitUntilClientOperationIsFinished:] + 184
5   com.apple.IMAP                          0x00007fff909eaed7 -[IMAPGateway addClientOperation:toQueueAndWaitUntilFinished:] + 397
6   com.apple.IMAP                          0x00007fff909d9b3f -[IMAPConnection _authenticateWithAuthenticator:] + 136
7   com.apple.MailCore                      0x00007fff8b12cd10 -[MCConnection authenticate] + 594
8   com.apple.IMAP                          0x00007fff909d99e0 -[IMAPConnection authenticate] + 66
9   com.apple.Mail.framework                0x00007fff8e1caa08 -[MFIMAPAccount connectAndAuthenticate:] + 1163
10 com.apple.Mail.framework                0x00007fff8e1cba8b -[MFIMAPAccount _recoverFromConnectionlessStateHighPriority:] + 118
11 com.apple.Mail.framework                0x00007fff8e1cb7ee -[MFIMAPAccount _getPotentialGatewayForMailbox:options:createdNewConnection:needsSelect:] + 168
12 com.apple.Mail.framework                0x00007fff8e1cb486 -[MFIMAPAccount _gatewayForMailbox:name:options:] + 272
13 com.apple.Mail.framework                0x00007fff8e220e88 -[MFLibraryIMAPStore _gatewayCreateIfNeeded:options:] + 158
14 com.apple.Mail.framework                0x00007fff8e2179ca -[MFLibraryIMAPStore _openSynchronouslyUpdatingMetadata:withOptions:] + 279
15 com.apple.CoreFoundation                0x00007fff8baafdec __invoking___ + 140
16 com.apple.CoreFoundation                0x00007fff8baafc54 -[NSInvocation invoke] + 308
17 com.apple.MailCore                      0x00007fff8b175b74 -[MCMonitoredInvocation invoke] + 211
18 com.apple.MailCore                      0x00007fff8b198808 -[MCThrowingInvocationOperation main] + 40
19 com.apple.MailCore                      0x00007fff8b13cf08 -[_MCInvocationOperation main] + 332
20 com.apple.Foundation                    0x00007fff8a675591 -[__NSOperationInternal _start:] + 631
21 com.apple.Foundation                    0x00007fff8a67523b __NSOQSchedule_f + 64
22 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
23 libdispatch.dylib                       0x00007fff8ac927ff _dispatch_async_redirect_invoke + 154
24 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
25 libdispatch.dylib                       0x00007fff8ac9009e _dispatch_root_queue_drain + 326
26 libdispatch.dylib                       0x00007fff8ac91193 _dispatch_worker_thread2 + 40
27 libsystem_pthread.dylib                 0x00007fff92826ef8 _pthread_wqthread + 314
28 libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 19:: -[MFLibraryIMAPStore openSynchronously] Dispatch queue: NSOperationQueue 0x60800023da00
0   libsystem_kernel.dylib                  0x00007fff8efa5a1a mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x00007fff8efa4d18 mach_msg + 64
2   com.apple.CoreFoundation                0x00007fff8bae7315 __CFRunLoopServiceMachPort + 181
3   com.apple.CoreFoundation                0x00007fff8bae6939 __CFRunLoopRun + 1161
4   com.apple.CoreFoundation                0x00007fff8bae6275 CFRunLoopRunSpecific + 309
5   com.apple.Foundation                    0x00007fff8a6d6a7c -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 253
6   com.apple.MailCore                      0x00007fff8b1952cf -[MCSocket _waitForSecurityLayerNegotiationStreamsAreScheduled:] + 645
7   com.apple.MailCore                      0x00007fff8b194a28 -[MCSocket connectToHost:withPort:isBackground:] + 1524
8   com.apple.MailCore                      0x00007fff8b12bdd4 -[MCConnection connectDiscoveringBestSettings:] + 1115
9   com.apple.Mail.framework                0x00007fff8e1ca923 -[MFIMAPAccount connectAndAuthenticate:] + 934
10 com.apple.Mail.framework                0x00007fff8e1cba8b -[MFIMAPAccount _recoverFromConnectionlessStateHighPriority:] + 118
11 com.apple.Mail.framework                0x00007fff8e1cb7ee -[MFIMAPAccount _getPotentialGatewayForMailbox:options:createdNewConnection:needsSelect:] + 168
12 com.apple.Mail.framework                0x00007fff8e1cb486 -[MFIMAPAccount _gatewayForMailbox:name:options:] + 272
13 com.apple.Mail.framework                0x00007fff8e220e88 -[MFLibraryIMAPStore _gatewayCreateIfNeeded:options:] + 158
14 com.apple.Mail.framework                0x00007fff8e2179ca -[MFLibraryIMAPStore _openSynchronouslyUpdatingMetadata:withOptions:] + 279
15 com.apple.CoreFoundation                0x00007fff8baafdec __invoking___ + 140
16 com.apple.CoreFoundation                0x00007fff8baafc54 -[NSInvocation invoke] + 308
17 com.apple.MailCore                      0x00007fff8b175b74 -[MCMonitoredInvocation invoke] + 211
18 com.apple.MailCore                      0x00007fff8b198808 -[MCThrowingInvocationOperation main] + 40
19 com.apple.MailCore                      0x00007fff8b13cf08 -[_MCInvocationOperation main] + 332
20 com.apple.Foundation                    0x00007fff8a675591 -[__NSOperationInternal _start:] + 631
21 com.apple.Foundation                    0x00007fff8a67523b __NSOQSchedule_f + 64
22 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
23 libdispatch.dylib                       0x00007fff8ac927ff _dispatch_async_redirect_invoke + 154
24 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
25 libdispatch.dylib                       0x00007fff8ac9009e _dispatch_root_queue_drain + 326
26 libdispatch.dylib                       0x00007fff8ac91193 _dispatch_worker_thread2 + 40
27 libsystem_pthread.dylib                 0x00007fff92826ef8 _pthread_wqthread + 314
28 libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 20:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 21:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 22:: Dispatch queue: NSOperationQueue 0x6000002c2840
0   libsystem_kernel.dylib                  0x00007fff8efa5a1a mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x00007fff8efa4d18 mach_msg + 64
2   libsystem_kernel.dylib                  0x00007fff8efa03f4 semaphore_create + 99
3   libdispatch.dylib                       0x00007fff8ac92a8f _dispatch_semaphore_create_port + 62
4   libdispatch.dylib                       0x00007fff8ac9299e _dispatch_semaphore_wait_slow + 87
5   libxpc.dylib                            0x00007fff86cad733 xpc_connection_send_message_with_reply_sync + 195
6   com.apple.CoreFoundation                0x00007fff8bab8193 -[CFPrefsPlistSource copyReplyForDaemonMessage:toConnection:error:] + 243
7   com.apple.CoreFoundation                0x00007fff8bc12820 __47-[CFPrefsPlistSource alreadylocked_synchronize]_block_invoke_2 + 352
8   com.apple.CoreFoundation                0x00007fff8bab7a9b withDaemonConnection + 299
9   com.apple.CoreFoundation                0x00007fff8bab74fb -[CFPrefsPlistSource alreadylocked_synchronize] + 587
10 com.apple.CoreFoundation                0x00007fff8bab71f3 _copyValueForKey + 131
11 com.apple.CoreFoundation                0x00007fff8bab7147 -[CFPrefsPlistSource copyValueForKey:] + 71
12 com.apple.CoreFoundation                0x00007fff8badf730 ___CFPreferencesCopyValueWithContainer_block_invoke + 32
13 com.apple.CoreFoundation                0x00007fff8bab6097 +[CFPrefsSource withSourceForIdentifier:user:byHost:container:perform:] + 839
14 com.apple.CoreFoundation                0x00007fff8badf6c7 _CFPreferencesCopyValueWithContainer + 231
15 com.apple.framework.internetaccounts          0x00007fff86587602 __IADebugLog_block_invoke + 49
16 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
17 libdispatch.dylib                       0x00007fff8ac8e21c dispatch_once_f + 79
18 com.apple.framework.internetaccounts          0x00007fff865875c7 IADebugLog + 407
19 com.apple.framework.internetaccounts          0x00007fff86563719 -[IAGoogleAuthTokenManager init] + 182
20 com.apple.framework.internetaccounts          0x00007fff8656361e __34+[IAGoogleAuthTokenManager shared]_block_invoke + 37
21 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
22 libdispatch.dylib                       0x00007fff8ac8e21c dispatch_once_f + 79
23 com.apple.framework.internetaccounts          0x00007fff865635f7 +[IAGoogleAuthTokenManager shared] + 103
24 com.apple.Mail.framework                0x00007fff8e24c8ee -[MFMailAccount googleClientToken] + 165
25 com.apple.MailCore                      0x00007fff8b18cf8f -[_MCPlainClientTokenSaslClient initialResponse] + 82
26 com.apple.IMAP                          0x00007fff909c84a6 -[IMAPClientAuthenticateOperation newCommandDataForLiteralPlus:] + 174
27 com.apple.IMAP                          0x00007fff909d81a1 -[IMAPConnection _sendCommand:response:] + 1359
28 com.apple.IMAP                          0x00007fff909d9f2c -[IMAPConnection executeAuthenticate:] + 294
29 com.apple.IMAP                          0x00007fff909c8581 -[IMAPClientAuthenticateOperation executeOnConnection:] + 26
30 com.apple.IMAP                          0x00007fff909d7ada -[IMAPConnection prepareAndExecuteOperation:outWrongState:] + 1216
31 com.apple.IMAP                          0x00007fff909eaafe -[IMAPGateway _allowClientOperationThrough:] + 910
32 com.apple.IMAP                          0x00007fff909ea715 -[IMAPGateway allowClientOperationThrough:] + 385
33 com.apple.IMAP                          0x00007fff909ce20b -[IMAPClientOperation main] + 57
34 com.apple.Foundation                    0x00007fff8a675591 -[__NSOperationInternal _start:] + 631
35 com.apple.Foundation                    0x00007fff8a67523b __NSOQSchedule_f + 64
36 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
37 libdispatch.dylib                       0x00007fff8ac927ff _dispatch_async_redirect_invoke + 154
38 libdispatch.dylib                       0x00007fff8ac8e2ad _dispatch_client_callout + 8
39 libdispatch.dylib                       0x00007fff8ac9009e _dispatch_root_queue_drain + 326
40 libdispatch.dylib                       0x00007fff8ac91193 _dispatch_worker_thread2 + 40
41 libsystem_pthread.dylib                 0x00007fff92826ef8 _pthread_wqthread + 314
42 libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 23:
0   libsystem_kernel.dylib                  0x00007fff8efa9e6a __workq_kernreturn + 10
1   libsystem_pthread.dylib                 0x00007fff92826f08 _pthread_wqthread + 330
2   libsystem_pthread.dylib                 0x00007fff92829fb9 start_wqthread + 13
Thread 24:
0   libsystem_kernel.dylib                  0x00007fff8efa5a1a mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x00007fff8efa4d18 mach_msg + 64
2   com.apple.CoreFoundation                0x00007fff8bae7315 __CFRunLoopServiceMachPort + 181
3   com.apple.CoreFoundation                0x00007fff8bae6939 __CFRunLoopRun + 1161
4   com.apple.CoreFoundation                0x00007fff8bae6275 CFRunLoopRunSpecific + 309
5   com.apple.AppKit                        0x00007fff898951ce _NSEventThread + 144
6   libsystem_pthread.dylib                 0x00007fff92825899 _pthread_body + 138
7   libsystem_pthread.dylib                 0x00007fff9282572a _pthread_start + 137
8   libsystem_pthread.dylib                 0x00007fff92829fc9 thread_start + 13
Thread 25:: com.apple.NSURLConnectionLoader
0   libsystem_kernel.dylib                  0x00007fff8efa5a1a mach_msg_trap + 10
1   libsystem_kernel.dylib                  0x00007fff8efa4d18 mach_msg + 64
2   com.apple.CoreFoundation                0x00007fff8bae7315 __CFRunLoopServiceMachPort + 181
3   com.apple.CoreFoundation                0x00007fff8bae6939 __CFRunLoopRun + 1161
4   com.apple.CoreFoundation                0x00007fff8bae6275 CFRunLoopRunSpecific + 309
5   com.apple.Foundation                    0x00007fff8a6d4907 +[NSURLConnection(Loader) _resourceLoadLoop:] + 348
6   com.apple.Foundation                    0x00007fff8a6d470b __NSThread__main__ + 1318
7   libsystem_pthread.dylib                 0x00007fff92825899 _pthread_body + 138
8   libsystem_pthread.dylib                 0x00007fff9282572a _pthread_start + 137
9   libsystem_pthread.dylib                 0x00007fff92829fc9 thread_start + 13
Thread 26:: com.apple.CFSocket.private
0   libsystem_kernel.dylib                  0x00007fff8efa99aa __select + 10
1   com.apple.CoreFoundation                0x00007fff8bb32d43 __CFSocketManager + 867
2   libsystem_pthread.dylib                 0x00007fff92825899 _pthread_body + 138
3   libsystem_pthread.dylib                 0x00007fff9282572a _pthread_start + 137
4   libsystem_pthread.dylib                 0x00007fff92829fc9 thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x00007fff78923310 rcx: 0x00007fff530e5ea8 rdx: 0x0000000000000000
rdi: 0x0000000000000707 rsi: 0x0000000000000006 rbp: 0x00007fff530e5ed0 rsp: 0x00007fff530e5ea8
   r8: 0x00007fff8d3efab4   r9: 0x00007fff8af2b900 r10: 0x0000000008000000 r11: 0x0000000000000206
r12: 0x00007fff530e6030 r13: 0x0000600000123160 r14: 0x0000000000000006 r15: 0x00007fff530e5f10
rip: 0x00007fff8efa9866 rfl: 0x0000000000000206 cr2: 0x0000000113113000
Logical CPU:     0
Error Code:      0x02000148
Trap Number:     133
Binary Images:
       0x10cb18000 -        0x10ce07fff com.apple.mail (7.0 - 1816) <E8B5953C-FD5C-3D3B-B481-34F23E45730A> /Applications/Mail.app/Contents/MacOS/Mail
       0x10d264000 -        0x10d266fff apop.so (170) <79E840B4-6D30-3CBB-99D3-345D6C77D5DF> /usr/lib/sasl2/apop.so
       0x10d26a000 -        0x10d27afff dhx.so (170) <A9EBA1D4-8ED8-37BB-BA1E-263091EAF96E> /usr/lib/sasl2/dhx.so
       0x10d286000 -        0x10d28efff digestmd5WebDAV.so (170) <9DBE65CE-9B5C-37A3-8112-40F39BE3B5F8> /usr/lib/sasl2/digestmd5WebDAV.so
       0x10d293000 -        0x10d295fff libanonymous.2.so (170) <D1297C21-A57B-311E-9006-C3FB8689849A> /usr/lib/sasl2/libanonymous.2.so
       0x10d299000 -        0x10d29bfff libcrammd5.2.so (170) <940A42FC-C634-354E-AD74-691CD90A1427> /usr/lib/sasl2/libcrammd5.2.so
       0x10d2a0000 -        0x10d2a8ff7 libdigestmd5.2.so (170) <122C0383-F9B2-34D1-89AF-D317BC4D5164> /usr/lib/sasl2/libdigestmd5.2.so
       0x10d2ad000 -        0x10d2b1fff libgssapiv2.2.so (170) <AA58D85E-916C-3B0B-959A-DCC58497D0F2> /usr/lib/sasl2/libgssapiv2.2.so
       0x10d2b6000 -        0x10d2b8fff login.so (170) <7D801D4E-A1A4-32FC-BF2E-9F25DB902523> /usr/lib/sasl2/login.so
       0x10d2bc000 -        0x10d2c1fff libntlm.so (170) <18693B29-154F-339C-A329-4C42A43F6428> /usr/lib/sasl2/libntlm.so
       0x10d2c6000 -        0x10d2cdfff libotp.2.so (170) <D1C70F92-1C75-340B-AD53-0C2CD79144FF> /usr/lib/sasl2/libotp.2.so
       0x10d2d6000 -        0x10d2d8fff libplain.2.so (170) <E9C3B22A-5958-3869-B778-55948D1EC2B7> /usr/lib/sasl2/libplain.2.so
       0x10d2dc000 -        0x10d2e0fff libpps.so (170) <9BAB4F91-A2DF-3F11-A2E4-8E353562ECC8> /usr/lib/sasl2/libpps.so
       0x10d2e5000 -        0x10d2e8ff7 mschapv2.so (170) <7B006E8A-BEB7-3004-9C16-134D37C077A5> /usr/lib/sasl2/mschapv2.so
       0x10d2ed000 -        0x10d315ff6 com.apple.DirectoryService.PasswordServerFramework (10.9 - 36) <C36B818F-C1FE-3F3F-A01C-F4613F570D4D> /System/Library/PrivateFrameworks/PasswordServer.framework/Versions/A/PasswordS erver
       0x10d32b000 -        0x10d32dfff smb_nt.so (170) <903A6BA5-5B1F-305A-98EA-27BE757A7CFF> /usr/lib/sasl2/smb_nt.so
       0x10d332000 -        0x10d334fff pwauxprop.so (400) <924056F9-D203-3DAD-B78D-61439A2E6BE8> /usr/lib/sasl2/pwauxprop.so
       0x10d339000 -        0x10d33bfff shadow_auxprop.so (170) <2E0153C3-9D36-3496-8885-DE8B91838036> /usr/lib/sasl2/shadow_auxprop.so
       0x10d340000 -        0x10d342fff smb_ntlmv2.so (170) <15A0B3C1-DA72-3B4C-8234-EF24132FEB0B> /usr/lib/sasl2/smb_ntlmv2.so
       0x10eb61000 -        0x10eb68ff7 com.apple.SyncedDefaults (1.3 - 91.30) <FC5A4423-3D91-3A34-853A-C49971EEAE4E> /System/Library/PrivateFrameworks/SyncedDefaults.framework/SyncedDefaults
       0x11203f000 -        0x112042fff libspindump.dylib (161) <588EDDE0-B20A-3649-92B7-C2226EB237E8> /usr/lib/libspindump.dylib
       0x112198000 -        0x112199fff com.apple.AddressBook.LocalSourceBundle (8.0 - 1365) <260EDDAA-A812-3097-BE14-A63EA4BEDD31> /System/Library/Address Book Plug-Ins/LocalSource.sourcebundle/Contents/MacOS/LocalSource
       0x1121ab000 -        0x1121afff7 com.apple.DirectoryServicesSource (8.0 - 1365) <2F2D5BAA-F006-3701-922C-37EF076DE3D1> /System/Library/Address Book Plug-Ins/DirectoryServices.sourcebundle/Contents/MacOS/DirectoryServices
       0x112cae000 -        0x112caeff9 +cl_kernels (???) <8008097B-D4F3-450E-9BED-7029C8AFAEDB> cl_kernels
       0x112cc3000 -        0x112cc4ffa +cl_kernels (???) <B93AD5F8-3BA3-4DF4-97D6-9A5137048DAD> cl_kernels
       0x112cc8000 -        0x112cc8ffd +cl_kernels (???) <8059D9F9-4700-4237-B5F6-10270270F41D> cl_kernels
       0x112d3e000 -        0x112e24fef unorm8_bgra.dylib (2.3.58) <9FF943D1-4EF7-36CA-852D-B61C2E554713> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/ImageFormats/u norm8_bgra.dylib
       0x112e76000 -        0x112f56ff7 unorm8_rgba.dylib (2.3.58) <DDD1AFEB-FD30-34D2-958A-823C3EFD649A> /System/Library/Frameworks/OpenCL.framework/Versions/A/Libraries/ImageFormats/u norm8_rgba.dylib
       0x112fa8000 -        0x112fa8fff +cl_kernels (???) <B57BB37D-07A8-4B44-9A8F-4BEB3395F62F> cl_kernels
       0x113048000 -        0x113048ffb +cl_kernels (???) <546122C5-B9C2-4A19-AD43-A811CB3F32FF> cl_kernels
       0x11305e000 -        0x11305fff2 +cl_kernels (???) <BDD50C1D-953E-4FF5-ADB7-53E484E19F72> cl_kernels
       0x113068000 -        0x113068ffe +cl_kernels (???) <ABA6783A-F44B-4959-98EB-7501AA205545> cl_kernels
       0x113071000 -        0x113071ff7 +cl_kernels (???) <7797CCA3-3341-43FC-B014-E29C2CC2B593> cl_kernels
       0x11307c000 -        0x11307cff7 +cl_kernels (???) <B46B5894-5999-4694-AC35-DC983EB41408> cl_kernels
       0x113293000 -        0x113294ff4 +cl_kernels (???) <B72DD580-7F28-41F5-A197-93E535A62AD0> cl_kernels
    0x7fff628d1000 -     0x7fff62904817 dyld (239.3) <D1DFCF3F-0B0C-332A-BCC0-87A851B570FF> /usr/lib/dyld
    0x7fff864c6000 -     0x7fff864deff7 com.apple.GenerationalStorage (2.0 - 160.2) <79629AC7-896F-3302-8AC1-4939020F08C3> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
    0x7fff864df000 -     0x7fff86537ff7 com.apple.Symbolication (1.4 - 129) <16D42516-7B5E-357C-898A-FAA9EE7642B3> /System/Library/PrivateFrameworks/Symbolication.framework/Versions/A/Symbolicat ion
    0x7fff86538000 -     0x7fff86540ff7 com.apple.AppleSRP (5.0 - 1) <ABC7F088-1FD5-3768-B9F3-847F355E90B3> /System/Library/PrivateFrameworks/AppleSRP.framework/Versions/A/AppleSRP
    0x7fff86541000 -     0x7fff8654cfff libkxld.dylib (2422.1.72) <C88EF3E6-B31F-3E12-BE9B-562D912BA733> /usr/lib/system/libkxld.dylib
    0x7fff8654d000 -     0x7fff8659cff7 com.apple.framework.internetaccounts (2.1 - 210) <C77069C7-928C-315C-AA61-D90543901F20> /System/Library/PrivateFrameworks/InternetAccounts.framework/Versions/A/Interne tAccounts
    0x7fff8659d000 -     0x7fff868b7ff7 com.apple.MediaToolbox (1.0 - 1273.29) <6260E68B-7E50-3D49-8C0A-7145614C13D8> /System/Library/Frameworks/MediaToolbox.framework/Versions/A/MediaToolbox
    0x7fff868b8000 -     0x7fff868c8ffb libsasl2.2.dylib (170) <C8E25710-68B6-368A-BF3E-48EC7273177B> /usr/lib/libsasl2.2.dylib
    0x7fff868c9000 -     0x7fff868d0ff3 libcopyfile.dylib (103) <5A881779-D0D6-3029-B371-E3021C2DDA5E> /usr/lib/system/libcopyfile.dylib
    0x7fff868d1000 -     0x7fff868d9ff3 libCGCMS.A.dylib (599.7) <92AA4E85-7633-36E2-BAD0-7B1A2E48E75C> /System/Library/Frameworks/CoreGraphics.framework/Versions/A/Resources/libCGCMS .A.dylib
    0x7fff868da000 -     0x7fff86901ffb libsystem_info.dylib (449.1.3) <7D41A156-D285-3849-A2C3-C04ADE797D98> /usr/lib/system/libsystem_info.dylib
    0x7fff86902000 -     0x7fff8690affc libGFXShared.dylib (9.0.83) <11A621C3-37A0-39CE-A69B-8739021BD79D> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGFXShared.d ylib
    0x7fff8690b000 -     0x7fff86969ff7 com.apple.corelocation (1486.17 - 1486.24) <9FBB29F0-E000-3190-A96C-9EAA5CCCA2A0> /System/Library/Frameworks/CoreLocation.framework/Versions/A/CoreLocation
    0x7fff8696a000 -     0x7fff8696dfff libCoreVMClient.dylib (58.1) <EBC36C69-C896-3C3D-8589-3E9023E7E56F> /System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libCoreVMClien t.dylib
    0x7fff8696e000 -     0x7fff8699cff7 com.apple.securityinterface (9.0 - 55047) <0346D8A9-2CAA-38F3-A741-5FBA5E9F1E7C> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
    0x7fff8699d000 -     0x7fff8699dffd com.apple.audio.units.AudioUnit (1.9 - 1.9) <6E89F3CB-CC41-3728-9F9A-FDFC151E8261> /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x7fff8699e000 -     0x7fff869a3ff7 com.apple.MediaAccessibility (1.0 - 43) <D309D83D-5FAE-37A4-85ED-FFBDA8B66B82> /System/Library/Frameworks/MediaAccessibility.framework/Versions/A/MediaAccessi bility
    0x7fff869a4000 -     0x7fff86be7fff com.apple.AddressBook.framework (8.0 - 1365) <816242B1-D45E-3B5D-BC98-BB23458D5367> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
    0x7fff86be8000 -     0x7fff86c45fff com.apple.imfoundation (10.0 - 1000) <122D84B9-871D-3885-9D8D-840CD529028F> /System/Library/PrivateFrameworks/IMFoundation.framework/Versions/A/IMFoundatio n
    0x7fff86c46000 -     0x7fff86c88ff7 libauto.dylib (185.5) <F45C36E8-B606-3886-B5B1-B6745E757CA8> /usr/lib/libauto.dylib
    0x7fff86c8f000 -     0x7fff86ca2ff7 com.apple.AppContainer (3.0 - 1) <A90C058D-46E8-3BAB-AF17-AF9C7C273069> /System/Library/PrivateFrameworks/AppContainer.framework/Versions/A/AppContaine r
    0x7fff86ca3000 -     0x7fff86cc7fff libxpc.dylib (300.1.17) <4554927A-9467-365C-91F1-5A116989DD7F> /usr/lib/system/libxpc.dylib
    0x7fff86d46000 -     0x7fff86d53ff7 libxar.1.dylib (202) <5572AA71-E98D-3FE1-9402-BB4A84E0E71E> /usr/lib/libxar.1.dylib
    0x7fff87632000 -     0x7fff87720fff libJP2.dylib (1038) <6C8179F5-8063-3ED6-A7C2-D5603DECDF28> /System/Library/Frameworks/ImageIO.framework/Versions/A/Resources/libJP2.dylib
    0x7fff8778c000 -     0x7fff877d3fff libFontRegistry.dylib (127) <A77A0480-AA5D-3CC8-8B68-69985CD546DC> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontRegistry.dylib
    0x7fff877d4000 -     0x7fff877f1ff7 com.apple.framework.Apple80211 (9.0 - 900.47) <C897AFE6-DD73-387D-816A-67252A564207> /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Apple80211
    0x7fff877f2000 -     0x7fff87960ff7 libBLAS.dylib (1094.5) <DE93A590-5FA5-32A2-A16C-5D7D7361769F> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    0x7fff87961000 -     0x7fff87986ff7 com.apple.CoreVideo (1.8 - 117.2) <4674339E-26D0-35FA-9958-422832B39B12> /System/Library/Frameworks/CoreVideo.framework/Versions/A/CoreVideo
    0x7fff87987000 -     0x7fff887d3ff5 com.apple.WebCore (9537 - 9537.70) <7A90E9D3-4F26-3049-9C96-C6B8CB1395C8> /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    0x7fff887d4000 -     0x7fff887f6fff com.apple.framework.familycontrols (4.1 - 410) <4FDBCD10-CAA2-3A9C-99F2-06DCB8E81DEE> /System/Library/PrivateFrameworks/FamilyControls.framework/Versions/A/FamilyCon trols
    0x7fff887f7000 -     0x7fff887f8fff com.apple.TrustEvaluationAgent (2.0 - 25) <334A82F4-4AE4-3719-A511-86D0B0723E2B> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
    0x7fff887f9000 -     0x7fff88a51ff1 com.apple.security (7.0 - 55471) <233831C5-C457-3AD5-AFE7-E3E2DE6929C9> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x7fff88fd2000 -     0x7fff8900efff com.apple.ids (10.0 - 1000) <22502AAF-CC59-33EC-9ACF-106315206701> /System/Library/PrivateFrameworks/IDS.framework/Versions/A/IDS
    0x7fff8903a000 -     0x7fff8903bff7 libsystem_sandbox.dylib (278.10) <A47E7E11-3C76-318E-B67D-98972B86F094> /usr/lib/system/libsystem_sandbox.dylib
    0x7fff8903c000 -     0x7fff8930aff4 com.apple.CoreImage (9.0.54) <74BB8685-69A9-3A45-8DED-EA26BD39D710> /System/Library/Frameworks/QuartzCore.framework/Versions/A/Frameworks/CoreImage .framework/Versions/A/CoreImage
    0x7fff8930b000 -     0x7fff89378fff com.apple.SearchKit (1.4.0 - 1.4.0) <B9B8D510-A27E-36B0-93E9-17146D9E9045> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x7fff89379000 -     0x7fff893beff7 libcurl.4.dylib (78) <A722B4F0-1F6C-3E16-9CB1-4C6ADC15221E> /usr/lib/libcurl.4.dylib
    0x7fff893bf000 -     0x7fff893c7fff libMatch.1.dylib (19) <021293AB-407D-309A-87F5-8E782F46753E> /usr/lib/libMatch.1.dylib
    0x7fff89410000 -     0x7fff894adfff com.apple.imcore (10.0 - 1000) <027E09B4-B4B6-3710-8806-B4CE41DF3242> /System/Library/PrivateFrameworks/IMCore.framework/Versions/A/IMCore
    0x7fff894ae000 -     0x7fff894bdff8 com.apple.LangAnalysis (1.7.0 - 1.7.0) <8FE131B6-1180-3892-98F5-C9C9B79072D4> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x7fff894be000 -     0x7fff89587fff com.apple.LaunchServices (572.23 - 572.23) <8D955BDE-2C4C-3DD4-B4D7-2D916174FE1D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
    0x7fff89588000 -     0x7fff8959aff7 com.apple.addressbook.ContactsAutocomplete (8.0 - 1365) <9EF30F4C-2C3F-321C-8C32-1445395FD9C7> /System/Library/PrivateFrameworks/ContactsAutocomplete.framework/Versions/A/Con tactsAutocomplete
    0x7fff8959b000 -     0x7fff8966cff7 com.apple.QuickLookUIFramework (5.0 - 622.3) <9741E66B-3978-35F6-8846-B6C528945611> /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuickLookUI.f ramework/Versions/A/QuickLookUI
    0x7fff8966d000 -     0x7fff8967aff0 libbz2.1.0.dylib (29) <0B98AC35-B138-349C-8063-2B987A75D24C> /usr/lib/libbz2.1.0.dylib
    0x7fff896cc000 -     0x7fff896d0fff libsystem_stats.dylib (93.1.26) <B9E26A9E-FBBC-3938-B8B7-6CF7CA8C99AD> /usr/lib/system/libsystem_stats.dylib
    0x7fff896d1000 -     0x7fff8a245ff7 com.apple.AppKit (6.9 - 1265) <0E9FC8BF-DA3C-34C5-91CC-12BC922B5F01> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x7fff8a246000 -     0x7fff8a3f3f27 libobjc.A.dylib (551.1) <AD7FD984-271E-30F4-A361-6B20319EC73B> /usr/lib/libobjc.A.dylib
    0x7fff8a3f4000 -     0x7fff8a547ff7 com.apple.audio.toolbox.AudioToolbox (1.9 - 1.9) <A0B7B007-9BD8-30E2-B644-47856DA29FEE> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x7fff8a548000 -     0x7fff8a575ff2 com.apple.frameworks.CoreDaemon (1.3 - 1.3) <43A137C4-3E72-37DC-945F-92569C12AAD4> /System/Library/PrivateFrameworks/CoreDaemon.framework/Versions/B/CoreDaemon
    0x7fff8a576000 -     0x7fff8a594ff7 com.apple.CalendarFoundation (7.0 - 111) <D5CEE7AE-3325-3E7E-924B-12834AE7D218> /System/Library/PrivateFrameworks/CalendarFoundation.framework/Versions/A/Calen darFoundation
    0x7fff8a595000 -     0x7fff8a624ff7 com.apple.Metadata (10.7.0 - 800.12) <04486C95-3E49-36C4-89B6-925E925BB417> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
    0x7fff8a625000 -     0x7fff8a66cff7 libcups.2.dylib (372) <348EED62-6C20-35D6-8EFB-E80943965100> /usr/lib/libcups.2.dylib

I am having the same problem. Any solution?? in my case so far is photo booth appstore terminal, facetime the built in camera is not working with skype

"Program terminated in remote system NONE: Logon failed" when adding a new table

Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
Christian

First thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
 One monitoring job (master job)
 One master controller job
 At least one data load job
 One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
 At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
 Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
 The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
 Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
 The Number of required data transfer jobs ,
 plus one background work process for Central Master (Monitoring) Job (only one per system!),
 plus one background work process for Master Controller Job,
 plus 3-5 additional empty background work processes (recommended per configuration),
 plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian

Error while creating SC: Internal Error - termination type TH_RES_FREE

Hi I encountered this error while creating a SC. All attributes for this user are maintained and the "check user" transaction does not give any error.
Amol Mate
Error when processing your request
What has happened?
The URL http://punhjwsapsrm:8000/sap/bc/gui/sap/its/bbpsc02/! was not called due to an error.
Note
The following error text was processed in the system SSS : Internal Error
The error occurred on the application server PUNHJWSAPSRM_SSS_00 and in the work process 1 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Form: SC_INIT of program SAPLBBP_SC_APP
Function: BBP_SC_APP_EVENT_DISPATCHER of program SAPLBBP_SC_APP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SSS in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PUNHJWSAPSRM_SSS_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server PUNHJWSAPSRM_SSS_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:100-u:PTEST -l:E-s:SSS-i:PUNHJWSAPSRM_SSS_00 -w:1-d:20051121-t:171904-v: TH_RES_FREE-e:Internal Error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi Amol,
First of all the sicf transaction is to be used only if you use the internal ITS.
Now you have to put an external breakpoint in the source code of the ABAP Program or FM you want to debug , one of these in your case :
Function: B40B_READ_TABLE of program SAPLBBP_BD_DRIVER_40B
Function: META_READ_TABLE of program SAPLBBP_BD_META_BAPIS
Form: LOCATIONS_READ of program SAPLBBP_ATTR_F4
Function: BBP_ATTR_F4_SLOC_PPOMA of program SAPLBBP_ATTR_F4
Form: STG_LOC_GET_FOR_LOCATION of program SAPLBBP_SC_APP
Form: STG_LOC_GET of program SAPLBBP_SC_APP
Form: LOCATION_STG_LOC_GET of program SAPLBBP_SC_APP
Form: USER_ATTRIBUTES_GET of program SAPLBBP_SC_APP
Then launch the transaction in IE, once the program reaches a breakpoint, you'll get the ABAP debuger in IE.
Regards.
PS: if it doesn't work, put the parameter ~generatedynpro in BBPGLOBAL service to have it applied to all BBP transactions
Vadim

File name in msdb.dbo.backupset no longer matches the actual file name on the storage media. Error 3013 Restore Database is terminating abnormally.

Thanks in advance for taking the time to read this and comment. Platform: Windows Server 2008 R2 Enterprise Edition SP1 (X64) Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)Problem Description: The file name recorded in the msdb.dbo.backupset (sans the extension) no longer matches the actual file name written to the backup media which is
in this case a NETAPP NAS storage share. Example:
Mohave_backup_2014_03_14_233001_1158878.bak      (from NETAPP NAS filer)
Mohave_backup_2014_03_16_233001_4167237             (from MSDB.dbo.backupset), as you can see, the last 7 digits (chars) of the file name are different, although the date and time are identical. The
file names had previously been matching perfectly. The first occurance of this problem occured on 03/13/2014 at 5:00 AM MST. The error generated by the job was:
Date  3/14/2014 10:29:23 AM
Log  Job History (Refresh - Restore Mohave_93_DEV AD HOC)
Step ID  1
Server  OurDevServer
Job Name  Refresh - Restore Mohave_93_DEV AD HOC
Step Name  Restore Mohave_93_DEV
Duration  00:00:01
Sql Severity  0
Sql Message ID  50000
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted  0
Message
Executed as user: OurDomain\OurNetworkServiceLogin. Restore Mohave Prod to Mohave_93_DEV - ERROR: 3013 RESTORE DATABASE is terminating abnormally. [SQLSTATE 01000] (Message 50000). The step succeeded.

Olaf:
Thanks for your reply. Sorry, my bad. I inadvertently copied wrong [name] form the msdb.dbo.backupset. On 3/13 and 3/14, the two file names did not match. In trying to select another example to show you this morning, I found that the names are now matching!
What I was doing was to create dynamic t-sql to retrieve the latest prod backup of the database, and then restore it with move to the development server. This is an ad-hoc job that the developers can run by themselves whenever they require a refresh. Unfortunately,
we only keep 3 days worth of backups for these databases, so the original disk file I was trying to use to restore no longer exists. Researching the original error, one of the error descriptions was that the restore could not find the file requested.
I thought this very strange since I get the file name directly from the backupset table. Further research did indeed show that the file names were different, but unfortunately, I failed to save the details of the file names. Anyway, in looking for a new example
to show you this morning, I have found that the file names are indeed matching exactly again. If this error pops up again, I will be sure to save all details and re-post.
Thanks, regards and best wishes to you and yours,

Error in creation of billing document: update was terminated

hi experts,
i am facing one problem while creating "Billing Document" in VF01 . After i save it says 'Document 941700032 has been saved' but later after i click on tht it shows d error "update was terminated' and billing document no i not getting created .
Thanks

After save, and during SAP's update processing, a fatal error occured, causing a rollback of the transaction. Since the user is no longer in that same transaction at this point, SAP issues the Express Document to attempt to inform that there was a failure. Check ST22 for abend...in the meantime, check for exit coding that may be causing an error...In my previous life, working with SD/LE at lot, I was able to get these regularly by fouling up my exit coding....lol.

Did a clean install 10.9.4. on a stock Fusion HD. When I run "diskutil list" via Terminal, everything is wrong. I have "EFI" and "apple Boot Boot OSX in every dev/disk** How do I fix? Any help would be much appreciated, thank you

Did a clean install 10.9.4. on a Apple Stock 1TB Fusion Hard Drive. When I run "diskutil list" via Terminal, everything is wrong. I have "EFI" and "apple Boot Boot OSX" in every dev/disk** Everything is out of place, How can I repair? Im willing too reformat if need be, however thats what I did in the first place. Any help would be much appreciated, thank you.
I know this cannot be correct
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         121.0 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         999.3 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion                 *1.1 TB     disk2
/dev/disk7
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                                                   *121.9 GB   disk7

It appears as if my startup disk has been reversed and not using the fusion ssd portion as it should. At least its now reversed as to what it used to be originally before. the 128gb ssd used to be on top. Is my mac booting fusion correctly? Thank you for responding as I was about to reformat.
CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group C2619AFE-0EB5-4721-8C50-3F3DBA520D1B
    =========================================================
    Name:         fusion
    Status:       Online
    Size:         1120333979648 B (1.1 TB)
    Free Space:   114688 B (114.7 KB)
    |
    +-< Physical Volume 583AAEA9-E333-4A83-9BE3-E937396E9248
    |   ----------------------------------------------------
    |   Index:    0
    |   Disk:     disk0s2
    |   Status:   Online
    |   Size:     120988852224 B (121.0 GB)
    |
    +-< Physical Volume B0C1CB16-D46F-4387-A679-B55392BB7934
    |   ----------------------------------------------------
    |   Index:    1
    |   Disk:     disk1s2
    |   Status:   Online
    |   Size:     999345127424 B (999.3 GB)
    |
    +-> Logical Volume Family FB42B9F4-CB77-4162-831B-7DCB7816E760
        Encryption Status:       Unlocked
        Encryption Type:         None
        Conversion Status:       NoConversion
        Conversion Direction:    -none-
        Has Encrypted Extents:   No
        Fully Secure:            No
        Passphrase Required:     No
        |
        +-> Logical Volume C0B8479B-C51C-45BF-B59B-1AA5DF3A3B83
            Disk:                  disk2
            Status:                Online
            Size (Total):          1111826497536 B (1.1 TB)
            Conversion Progress:   -none-
            Revertible:            No
            LV Name:               Fusion
            Volume Name:           Fusion
            Content Hint:          Apple_HFS
FoHeazys-Mac-mini:~ FoHeazy$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *121.3 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         121.0 GB   disk0s2
   3:                 Apple_Boot Boot OS X               134.2 MB   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:          Apple_CoreStorage                         999.3 GB   disk1s2
   3:                 Apple_Boot Boot OS X               650.0 MB   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Fusion                 *1.1 TB     disk2

Unable to connect offcard terminal with jcop simulator

Hi all,
I have made a JavaCard applet, called DisplayApplet.
I am using Eclipse with the JCOP tools plugin.
But now I want to make use of an own Terminal that connects to the applet and communicates to it using APDUs.
I don't have a smart card reader/card, so I want to use the simulation environment.
Now I read that I must use the "Remote" value in the JCTerminal constructor to connect to the simulation environment, but it doesn't work (of course I specify the remote value as input parameter).
I am unable to open a terminal.
I get the following exception at the term.open() command:
can't find/open/connect/reset smartcard/reader:
Failed to open [localhost:8050]: Connection refused: connect
Can anyone tell me what's wrong and how I can connect from an own made terminal to a JCOP simulation (I want to run the terminal within Eclipse, because I want to add a UI later on top of it) ??
Here is the code of my own made HostTerminal:
import com.ibm.jc.*;
public class HostTerminal {
     public static final String remoteTermName = "Remote";
     public static final String nativeTermName = "pcsc:4";
     public static final String remoteTermPara = null;
     public static final String nativeTermPara = null;
     public static void main(String[] args) {
          String termName = nativeTermName;
          String termPara = nativeTermPara;
          if (args.length > 0) {
                               if (!args[0].equals("native")) {
                    if (args[0].equals("remote")) {
                         termName = remoteTermName;
                         termPara = remoteTermPara;
                    } else {
                         try {
                              System.out.println("args[0] > " + args[0]);
                              System.out.println("args[1] > " + args[1]);
                              termName = args[0];
                              termPara = args[1];
                         } catch (Exception e) {
                              System.out.println("invalid command line options");
                              System.exit(1);
          // create terminal, i.e. create a connection to a reader
          // and wait for a card insertion
          JCTerminal term = null;
          try {
               term = JCTerminal.getInstance("Remote", null);
               term.open();
               term.waitForCard(5000);
          } catch (Exception e) {
               System.out.println(
                    "can't find/open/connect/reset smartcard/reader: "
                         + e.getMessage());
               System.exit(1);
          System.out.println("Connected to reader and card terminal ...");
          // now get the object representing the connection to the card
          JCard card = null;
          try {
               card = new JCard(term, null, 1000);
          } catch (Exception e) {
               System.out.println(
                    "can't connect to card in reader: " + e.getMessage());
               System.exit(1);
          String s;
          // get atr of card and print it
          try {
               ATR atr = card.getATR();
               s = JCInfo.atrToString(atr);
               System.out.println("Connected to card and received ATR: " + s);
          } catch (Exception e) {
               System.out.println("can't get ATR: " + e.getMessage());
               System.exit(1);
          // Note here that the DisplayApplet has to have to aid "display". The IDE
          // supports ascii characters in AIDs by using | when editing AIDs.
          // For instance, |display results in 636F756E746572.
          System.out.println("Selecting Display applet ...");
          DisplayApplet displayApplet = null;
          try {
               byte[] aid = ("phil0Display").getBytes();
               displayApplet = new DisplayApplet(card, aid);
               displayApplet.select();
               s = JCInfo.toHex(aid, 0, aid.length);
               System.out.println(
                    "Selecting of Display applet with aid " + s + " succeeded");
          } catch (Exception e) {
               System.out.println("can't select Display: " + e.getMessage());
               System.exit(1);
          }

If you run the JavaCard simulator from within Eclipse make sure you disconnect the JCOP shell before trying to connect via JCTerminal() from your Java program. Use the command /close
If you want to disconnect the JCOP shell automatically modify your "Java Card Application" run-configuration:
set Shell commands to execute: to /close
BTW: You were talking about JCOP 3.0, the Eclipse 2.1-plugin or do you use the new pre-release version JCOP 3.1 for Eclipse 3?

Problem with Photoshop hangs/freezing for users on a terminal server

Dear Forum!
I'm having some trouble with Photoshop freezing over a period of ~20 minutes when you (1.) user the eraser with special brushes and (2.) copy and paste material from a PDF to Photoshop. As you might notice by the size of this post i'm getting quite depserate over here and need some help.
A Little background information...
Photoshop CS6 is installed on a terminal server with ~25 Active users where 3 of them are using Photoshop.
The operating system on the server is Windows Server 2012 R2.
There are no additional add-ons just a plain installation of Photoshop in that matter.
The server uses 40-60% of the memory most of the time (mostly a bit less, some times a bit more but never 100%) and 40% of the CPU.
There's enough space free on the disc.
The problem in detail...
There are two occasions where the freezing has occured most of the time. After it hangs for the first time, it will happen everytime you do any of the operations over a period of ~20 minutes and it's Mutual for all users. When it freezes, the whole terminal session freezes but the program i still responding (it's not getting set to "not responding") when viewed from Another user through the task manager. Ending the process as an administrator sometimes work, although from the moment i end he proces it takes about 10-60 seconds Before the program actually Closes and the user gets back Control. The easiest thing to do most of the time is if an administrator forces them to log out.
1. The first occasion is when you use the eraser with a brush that's not standard but manually added. The names of the brush packages used are:
Extacy__Elemental
KKC_Fractal
Kornkid's_Grunge_Set
and the problem is with all brushes inside those packages. The way i evoke the problem is the following:
     1. Start Photoshop
     2. Create new
     3. Fill the background with any color
     4. Select the eraser tool
     5. Change the brush to one of the ones mentioned above
     6. Program freezes
2. The second scenario when the problem occurs is when the users copy something from a PDF to Photoshop. The way i evoke this is:
     1. Open a PDF
     2. Select area and copy it
     3. Open Photoshop
     4. Create new
     5. Paste into Photoshop
     6. Program freezes
Solutions we have tried so far...
I've been working on this for several round now and i'm not entirely sure on what exactly i have done. I will try and do the following solutions once more but i'm pretty sure that i have tried most of them.
Update graphic card drivers.
Resetting all Tools:
     1. Select options for a tool
     2. choose "Reset all Tools"
Resetting presets:
     1. Hold ctrl + shift + alt while Photoshop is starting
     2. select "yes"
Tested if it matters if i have a pen connected or not, which it doesn't.
Removed the special brushes (but it still freezes when copy/paste from PDF)
Removed "save in background" and "automatically save recovery information" options
Updated to latest version.
Turned off OpenGL
Solutions i haven't, but will try...
Reinstall Photoshop
Change font preview size
     1. Go to "type"
     2. select "Font prview size"
     3. select "none"
Delete system font cache
Close all Adobe applications including the Creative Cloud desktop app (if installed).
Navigate to \Windows\ServiceProfiles\LocalService\Appdata\Local
Delete the *FNTCACHE*.DAT or *FontCache*.dat files.
NOTE: The asterisk (*) indicates various numbers, letters, or words, such as FontCache-S-1-5-21.dat or COFFfntCache.dat.
Delete Photoshop font cache
Exit Photoshop and the Creative Cloud desktop app (if installed).
Navigate to the appropriate folder
Photoshop CS6 and earlier.
Windows XP: \Documents and Settings\Local Settings\Application Data\Adobe
Windows 7: \Users\[user name]\AppData\Local\Adobe
Photoshop CC and CC 2014
Windows 7 and 8: \Users\[user name]\AppData\Roaming\Adobe\Adobe Photoshop CC or CC 2014
     3. Delete the TypeSupport folder (Photoshop CS6 and earlier) or the CT Font Cache folder (Photoshop CC and CC 2014), and empty the trash.
Some links i have been using...
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html#troubleshoot
http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html

Hi Mylenium!
Thanks for your reply but since the users work on the terminal server via remote dektop the only data sent through the network is a "Picture" of what is happening on the server. All the operations are handled on and by the server and nothing is executed on the users local machine. Also all files are stored on the server therefore the load on the network is minimum.
We are not the first in the World to run this setup and i know that this is possible to do since i've read about others running PS like this.
Kind Regards,
J. Alm

Applescript for running sudo commands in terminal

I'm a newbie when it comes to Applescript and was wondering if someone could help with a basic request. I need to write a small script to do the following:
1. Launch terminal
2. Run the 'Sudo -s' command
3. Enter the administrator password (in plain text)
and then
4. run some sudo commands like "sudo defaults write /Library/Preferences/com.apple.loginwindow HiddenUsersList -array-add administrator"
I actually WANT the administrator password to be in the script in plain text even though I understand the security risks (I will literally be the only person to ever see the script). I've trawled forums all over but can't seem to find what I am looking for and cannot get it working by patching together the various commands I have found. Thanks in advance for any help you can give!
Sean

I've included two examples. The preferred way & the hacker way.
with administrator
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
    Author: rccharles
    For testing, run in the Script Editor.
      1) Click on the Event Log tab to see the output from the log statement
      2) Click on Run
    For running shell commands see:
    http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
    -- Write a message into the event log.
    log " --- Starting on " & ((current date) as string) & " --- "
    -- debug lines
    set unixDesktopPath to POSIX path of "/System/Library/User Template/"
    log "unixDesktopPath = " & unixDesktopPath
    set quotedUnixDesktopPath to quoted form of unixDesktopPath
    log "quoted form is " & quotedUnixDesktopPath
    try
        set fromUnix to do shell script "sudo ls -l " & quotedUnixDesktopPath with administrator privileges
        display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
    on error errMsg
        log "ls -l error..." & errMsg
    end try
end run
This version has an inline password.
Notice the echo 'password' |
The single quotes are no accident.
It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on. Here is an example.
    Author: rccharles
    For testing, run in the Script Editor.
      1) Click on the Event Log tab to see the output from the log statement
      2) Click on Run
    For running shell commands see:
    http://developer.apple.com/mac/library/technotes/tn2002/tn2065.html
on run
    -- Write a message into the event log.
    log " --- Starting on " & ((current date) as string) & " --- "
    -- debug lines
    set unixDesktopPath to POSIX path of "/System/Library/User Template/"
    log "unixDesktopPath = " & unixDesktopPath
    set quotedUnixDesktopPath to quoted form of unixDesktopPath
    log "quoted form is " & quotedUnixDesktopPath
    try
        set fromUnix to do shell script "echo 'password' | sudo ls -l " & quotedUnixDesktopPath
        display dialog "ls -l of " & quotedUnixDesktopPath & return & fromUnix
    on error errMsg
        log "ls -l error..." & errMsg
    end try
end run

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

BSP Terminating event not triggering

Hello Friends,
We have a scenario, where a BSP application is triggered from a Workflow, for a certain approval, and after the user clicks on Approve button on the BSP Page, the BSP would write to the workflow container using SAP_WAPI_WRITE_CONTAINER and then we call SWF_WSC_CALLBACK_LAUNCH.
This used to work, but after an almost Fatal incident with our system, we are not able to get this to work.
We can see in the workflow log that the container is written, but the terminating event is not triggered, and the workflow doesn't move forward
Is there a setting that we're missing..??
Thanks,
Tat.

Have you tried:
call function 'SAP_WAPI_DECISION_COMPLETE'

Terminal

Similar Messages

Maybe you are looking for