Terminated with error: REP-50152:Error while sending mail
Hi
Gets this error while sending report mails to external email id's
Terminated with error: REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
Any setting to be done in report config file?
thanks
MG
It should be like this
<pluginParam name="mailServer">%MAILSERVER_NAME%</pluginParam>
Specify the name of your mail server in the place of %MAILSERVER_NAME% above
Also make sure that this is not commented out.
Thanks,
Similar Messages
-
Urgent:-REP-50152: Error while sending mail
hi
i am using reports10g. i have called a report from a form and destype=mail.
i have already mention the smtp server name in conf. file but still receiving this error
REP-50152: Error while sending mail - Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay for [email protected]
thanksYour smtp server forbids relaying, which is very common. Often a smtp server is configured to send only mails within the same domain without authentication. Otherwise, you need a username and password for the smtp server. I'm not sure if you can configure Reports to send mail through an authenticated server.
-
Error while sending mail from SAP
Hello All,
Recently we are facing an error while sending mail from SAP. When we try to compose a message ,it is moving to a dump error RAISE_EXCEPTION.
The details from ST22,
Short text
Exception condition "FOLDER_NOT_EXIST" raised.
Error analysis
A RAISE statement in the program "SA
condition "FOLDER_NOT_EXIST".
Since the exception was not intercep
program, processing was terminated.
Kindly suggest..
Thank You,
Regards,
HasanHello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
Acrobat 9 Pro " An error occurred while sending mail"
Dear Gurus:
Free ice cream to the person with the answer that works. I use Vista OS, 32 bit; IE (Primary) and Mozilla; Outlook E-mail (primary) and Windows Mail. The preceding has been the case for the last two years so "nothing has changed". I used Adobe Acrobat 9 Pro for two years and designed a number of interactive forms and used the functionality as much as possible. Overall a good experience with Pro 9
Case in point, I designed an interactive employment application that was regularly used, updated and re-released over a period of about two years without incident. It was set up to be completed online by employment applicants. Once completed, they would click to "e-mail the office" the completed application then close the document. It was set up with the button to send a form, and more precisely to send the form as .FDF to the mailto: address#1; address #2. Again it worked fine using either Mozilla or IE until last week. As usual, I made some minor edits to the existing body fields and left the buttons alone sine there was no need to bother them.
I emailed the revised .PDF document to "the web guy" who added it to the website- like all the times before. I went online to "test it" as usual so I filled it out. When I click the button to send form to office, the option comes up to select the email client. I use Outlook so I selected "Desktop E-mail Application", click OK and then I immediately get the message "An error has occurred while sending mail". In the past without fail, the Outlook would open after 1-3 seconds and attach the .FDF file with the normal .FDF and data jargon. no problem... Also, I am aware of extending features to Reader and the licensing issue, but I doubt that is an issue.....
So, before I posted here I tried a few things:
A- I tried opening the source .PDF application locally on my PC and filled it out. I clicked the button to "sent the file" to myself. To be clear this was not posted on the website, but it did open Outlook, create the email, add the .FDF and sent it to me. HHHMMMM so it works locally....
B- Next, I started fresh with a blank adobe document page and added two items: 1- a text field and a new email submit button I created to send the data via FDF. I set it up, it worked fine when I tested it locally on the PC and created the .FDF file and the Outlook email and I sent it to myself. Then I took this same little test file and added it to a different website I have access to, I re-published the site, ccessed the form and no dice...... I got the same message, " an error occurred while sending mail" when I clicked OK to use the Desktop Email Application.
C- I read other posts and Googled for about 6 hours yesterday and now I am missing clumps of hair.
So, it seems something "happened" that will not let the email be created from an existing form; or a NEW form that are available for use on a website; but BOTH work just fine if accessed on a local PC.
Please , and thank you..
Brian P.Hi Bill,
Thank you for your follow up. I'm not sure what you mean by, "did I do a comparison to the original". If you're asking whether I'm sure the .PDF and the .FDF are the "same" documents, they are... however the problem is even if they were entirely different forms, my issue is once the submit form button is clicked, Outlook fails to initialize and attach the .FDF file .
I mentioned how I tried to recreate the "error" by building a new form from scratch in order to eliminate all the possible variables of having a bug in the form that had been updated so many times before without incident. Even with the new form having just one text field and one submit form button, it worked as needed when I used the .PDF file locally right from my PC by filling out the field and submitting the form's .FDF data to myself. It opened the Outlookprogram, created the mail and attached the .FDF file. I clicked "send" and away it goes from "me" to "me" and I was able to open the email, click the .FDF then browse to the .PDF source form so the files could extract into the .PDF. All normal and all Okay , like 100 times before using the WEB, but not now... .
Today, even that simple form with one field and one submit button encounters the same "An error has occurred while sending mail" message upon clicking on the web based submit button. The option comes up to let me select the email server and when I click "OK" , the error notice comes up... grrrrrrrrrrrrr
In short, when the form is used in a website environment, it doesn't want to create the outgoing email with the .FDF file attachment. Normally, it worked like a peach.
?? I dunno
BP -
Working with 9.1.0.1
I have created a task which will send Mail to user when password is changed.
so in Notification Tab i Have clicked user check box and attached a appropiate Email Defination,
when task is triggered password is changed in OID but while sending mail i am getting below error.
I checked in metalink its shows when Email Server IT Res Name should be same as that configured in System property ,i checked both are same.
1 Dec 2011 18:06:54,735,[XELLERATE.REQUESTS],Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: {1}
lang.NullPointerException
at java.util.Hashtable.put(Hashtable.java:394)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.checkForEmailNotification(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.updateSchItem(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeProcessAdapter(Unknown Source)
at com.thortech.xl.adapterfactory.events.tcAdpEvent.finalizeAdapter(Unknown Source)
at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpOIDMODIFYUSER.implementation(adpOIDMODIFYUSER.java:81)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(Unknown Source)
at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.insertMileStones(Unknown Source)
at com.thortech.xl.client.events.tcTriggerUserProcesses.trigger(Unknown Source)
at com.thortech.xl.client.events.tcUSRTriggerUserProcesses.implementation(Unknown Source)
at com.thortech.xl.client.events.tcBaseEvent.run(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.runEvent(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcUSR.eventPostUpdate(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUserData(Unknown Source)
at com.thortech.xl.ejb.beansimpl.tcUserOperationsBean.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperationsSession.updateUser(Unknown Source)
at com.thortech.xl.ejb.beans.tcUserOperations_voj9p2_EOImpl.updateUser(tcUserOperations_voj9p2_EOImpl.java:1763)
at Thor.API.Operations.tcUserOperationsClient.updateUser(Unknown Source)
at sun.reflect.GeneratedMethodAccessor485.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)Create a task "Send Email" which will be called on SUCCESS of Change Password Task
Attach tcComplete in INTEGRATION tab And send Email from "Send Email" using Notification Tab
It seems that issue is with Change Password Task
Or Use APIs
Re: Send Mail via java code but using Mail Definitions -
Error while sending mail from SAP system
Hi all,
I configured SAP connect in ecc6.0 ehp7 while sending mail using tx sost i am error
Message cannot be transferred to node SMTP due to connection error (final) , below is the icm log.
ERROR => IcmPlAllocBuf: MpiGetOutbuf failed (rc = 14(MPI_ESTALE: outdated MPI handle)) [icxxplugin.c 1222]
ERROR => SMTP SmtpClientClose: alloc failed, rc = -3 [smtp_plg.c 3738]
ERROR => IcmBufFree(id=0/32): MpiFreeBuf failed (rc=14), MPI_ESTALE: outdated MPI handle [icxxplugin.c 165
ERROR => IcmConnClose: PlugInStopConn failed (rc=701) [icxxconn.c 3433]
can any one please help on this
Thanks,
Narendar.Hello Priyanka,
Actually, I performed the following two steps in order to solve the issue:
- In transaction SICF, the node for SAPConnect must be active. In our system, this node was in inactive state. Hence I activated it.
- Then In transaction SCOT-> Settings menu--> default domain should be 'xyz.com' if the email addresses in your company are maintained with a suffix xyz.com.
But for me the problem didnt get solved here..
The problem that i am facing now is that if in my user profile, I have the email address maintained, then i get an error saying 'Sender address rejected'. However, if i goto transaction SU01 and clear the email id, the mail is successfully sent to outer world.
You can try the above mentioned two steps using SICF and SCOT. If the problem does not get solved then try clearing the mail id in ur user profile.
Hope this helps. If you find an answer to the problem of the mail id getting cleared, then please let me know..
Regards,
Himanshu -
I'm getting this set of error messages intermittantly:
<P>
An error occured while sending mail: smtp server error
the server responded: (null) contact email admin
for assistance
other message
an error occured while sending mail: smtp server error
the server responded: intermail,
end with quote.quote contact email admin
for assistance
<P>
This problem may occur at low-use times when Messaging is installed with the
Trend virus protection software on the same system.
<P>
Change the version of the Trend software from 3.0 to the older 2.62 version.It's possible that your provider has made a change.
I think STARTTLS usually is used with port 587, instead of the standard SSL port 465.
Could you look up your provider's current SMTP settings to see whether your "Outgoing Server" settings need to be updated? If it's difficult to translate between your provider's help page and Thunderbird's dialog controls, you could provide a link to your provider's help page. -
When I send message the reply is "Access Denied" and a bunch of gobbly-gook ending with please re-check message. What would I check for? The G-G is of absolutely no value to the human species.
An error occurred while sending mail. The mail server responded: Access denied...3c61d9886161c1c1b119b169f84d0c00bd1d41014c8da58d391805d17cbcdccd89e9557dcc85058535d178217d0831cc6d65.... Please check the message and try again.
So what now. Mozilla must be the offspring of Microsoft in that help NEVER HELPS, EVER.Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings and disables most add-ons (extensions and themes).
''(If you're using an added theme, switch to the Default theme.)''
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu by clicking on the '''Restart with Add-ons Disabled...''' menu item:<br>
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.
Thank you. -
I tried to send a distributed form out to myself to check the system and received this error message: failed to send invitation emails to recipients. detailed error: an error occurred while sending mail. Any idea what I may have done wrong? I am using Microsoft Outlook 2010 with Windows 8.1 OS.
I think century link did change some settings though.
Help menu (Alt+H) > troubleshooting information. Copy to clipboard and paste into a reply here. Then I can see what setting your using with century link and compare them to what century link provide. -
I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
== TodayMe too (with Thunderbird). EXCEPT it reads
Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again. -
Suddenly I am not able to send any email from my account, from pc or phone.
It gives error message "An error occurred while sending mail. The mail server responded: Relaying not allowed. Please check the message recipient --------and try again."
I have checked account setting and is correct. please helpThis message, which comes from the server, usually means that you are using an smtp server provided for use with one particular account to send messages "from" other accounts. The fact that it also happens with your phone does indicate that it is external to Thunderbird.
How many different email accounts do you have? How many different providers are involved? -
I have been using Thunderbird for a couple of years. On Friday 10 Apr my home email account stopped sending either new messages or replying to incoming emails. In addition I have Thunderbird get my work email and I can send and receive email just fine. I can also send email from my android phone and via the web.
The message that has started coming up is the following:
An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in the message.. Please check the message and try again.
I have tried reinstalling Thunderbird but nothing changed, I tried changing the port from 25 to 587 to 465 but nothing changed. I do not understand what is going on as on Wednesday Apr 8 everything was working just fine.I have just tried ringing RCN and they tell me that because I am not using an RCN email as such they can not help but he suggested that it was a filter in Thunderbird but I have not set any filters and can not see if there are any or how to change them. The only way sending my website url right now is to make it not look like a url. Where do I need to look to solve this as I first wrote last week everything was fine.
-
Error occured while sending mail SO_OBJECT_SEND
Hi all,
While using ME23n for print preview of a PO I m getting the below error :
Error occured while sending mail SO_OBJECT_SEND,return code Z8.
The problem is this FM : SO_OBJECT_SEND is not explicitly used in the Driver program.
In debugging mode if I set a Break-point at SO_OBJECT_SEND, it shows BREAKPOINT set,
but doesnt stop at that place.
If any one of you know the solution or if you can suggest some points regarding this problem,
it will be of great help...
Thanks & Regards,
RamyaHi,
If it is not stoping means may be the so_document_object is calling based on any condtion.
Y u can't you go ur driver program and search for the FM.
Otherwise put the break point at the statement 'CALL FUNCTION'.
Thanks, -
Having been on Thunderbird for some years I have suddenly got the following message when trying to send mail.
An (SMTP) error occurred while sending mail. The server responded: Requested action aborted: This mail account has sent too many messages in a short amount of time. Please try later..
I have checked the SMTP server settings in tools, account settings and they are as they have always been. Is there something I have missed?Sending through web mail is totally irrelevant to using an SMTP server. The message even says it is from the server. Why do you think this is a Thunderbird problem.
The provider has put in place measures to keep people from spamming other email recipients using thier SMTP server. You have seen the result of those measures. -
i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
OR
i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information
Maybe you are looking for
-
All of a sudden itunes can't find music
There are tons of threads on this but I've seen none that answer my question. Long ago I moved my music to an external drive and set itunes to look for my misic there. It immediately worked. Today it cannot locate my music. I checked to see if the de
-
hi all, Observe the code . LOOP AT lines INTO ls_lines. ls_tdline = ls_lines-tdline. APPEND ls_tdline TO lt_tdline. ENDLOOP. Export the text on the text editor into ABAP memory. EXPORT (lt_tdline) TO MEMORY ID 'MID'. as u see i am
-
I'm trying to reinstall itunes 64 bit but it keeps saying its the 32 bit and wants me to go to the bonjour downloads for the 64 bit?
-
IOS7 - lock screen in portrait.
How can one lock the screen in portrait and then unlock it later. Was dead simple before iOS7!
-
Lync user unable to log in to client.
Error: Sign-in didn't work. You didn't get signed in. It might be your sign-in address or logon credentials, so try again. If that doesn't work, contact your support team Server: Lync 2013 Client: lync 2010 User was able to log in before but he went