Terminating Activity step with error
Hi,
I have an Activity step which task executes a method of a class. This method returns result code (and I do binding to WF) and if it is not 0 I would like to terminate this step (workitem) in error status. How is the best and easiest way to do this?
Thank you in advance,
Anna
Thank you.
But I am not able to set any handling in case of error of this step - if this fails it must be possible to see in worfklow log as error. If I set an exception in method and later not catch it in workfow, would I see it as erroneus?
Anna
Similar Messages
-
SCCM 2012 R2 - Migration TS Failed in Release Request Step with Error Code 0x80004005
Hi
I have Upgraded my lab from SCCM 2012 SP1 to SCCM 2012 R2. Now, While I am running TS for Refresh/Replace Migration, its successfully captures all the Data & settings and can also restores all Data & settings, but at release request Step TS got failed.
In SMSTS log file error was "Release Request Failed with error code 0x80004005".
Is there any KB released by Microsoft to fix this issue?? Due to this issue I am unable to run any other TS.I've seen a few weird scenarios with task sequences after an upgrade from SP1 to R2.
In most cases I've been able to fix these "problems" by simply creating a new task sequence, and copy all the custom steps to the new task sequence.
Also make sure to update boot images, mdt packages, usmt etc. to new versions.
So thats what I'd try first....
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen -
Problem in Workflow during activity step with "Requested start" time.
Hi,
I am working on SAP workflow.
In my workflow there is a activity step (wait step) where the workflow should wait before going to step after that wait step. To achieve this, I have used requested start as +10 min with WIS workitem creation. After 10 min, the workflow should proceed to further step but my workflow does not go further.
It was working good I tested couple of days back but now it doesn't. Can someone please help ?
Thanks.
Regards,
Rajesh.Please check the settings in SWU3. Most probably the settings is not correct. You will get a lot of discussion from this forum if you search with SWU3.
Thanks
Arghadip -
I am installing ADFS 3.0 alongside an existing ADFS 2.0 farm. I followed the steps as detailed here:
http://office365support.ca/migrating-ad-fs-2-0-to-ad-fs-3-0-for-office365-single-sign-on-2/
That worked fine initially, but I ran into problems and decided to remove ADFS 3.0 completely and start over. When I rerun the the Active Directory Federation Services Configuration Wizard, it gets almost all the way through, but fails with a generic
error of: An error occurred while trying to configure this machine.
Down below in the Detailed operation results, it displays:
ADRepository.CreateTopContainer
I am guessing I haven't cleared out something in Active Directory, but I'm not sure what that is.
In my research, I found suggestions for deleting everything under ProgramData\Microsoft\ADFS, but I don't believe I can do that since I am still relying on the ADFS 2.0 installation until I can cut over.
Any help would be much appreciated.
Regards,
David CollinsADFS 2.0 uses IIS and so the installation is under /inetpub/adfs/ls.
There's also a backup here:
ADFS : Restoring / re-installing ADFS v 2.0. -
Terminal Starts Up With Errors
When I start Terminal I see:
Welcome to Darwin!
export': not a valid identifier
export': not a valid identifier
export': not a valid identifier
export': not a valid identifier
': not a valid identifier
When I look in .profile I see:
# Your previous .profile (if any) is saved as .profile.dpsaved
# Setting the path for DarwinPorts.
export PATH=/sw/bin/sw/sbin/bin/sbin/usr/bin/usr/sbin$PATH
export CFLAGS=-I/sw/include
export LDFLAGS=-L/sw/lib
export CXXFLAGS=$CFLAGS
export CPPFLAGS=$CXXFLAGS
export ACLOCAL_FLAGS="-I /sw/share/aclocal"
export PKGCONFIGPATH="/sw/lib/pkgconfig"
export MACOSXDEPLOYMENTTARGET=10.4
DISPLAY=:0.0; export DISPLAY
test -r /sw/bin/init.sh && . /sw/bin/init.sh
The error is from the Path addition ... don't know where that came from; I may have been reading something suggesting I add it, but frankly don't remember where or when.
However, that sentence is found in a "Fink" file I saw once.
Any ideas how to correct the problem?with only the following lines active:
# Your previous .profile (if any) is saved as .profile.dpsaved <<<<<<<<not true, not there!!!
# Setting the path for DarwinPorts.
export PATH=/sw/bin:/sw/sbin:/bin/sbin:/usr/bin:/usr/sbin:$PATH
#export CFLAGS=-I/sw/include
YIELDS:
Welcome to Darwin!
Zork:~ rd$
With:
# Your previous .profile (if any) is saved as .profile.dpsaved
# Setting the path for DarwinPorts.
export PATH=/sw/bin:/sw/sbin:/bin/sbin:/usr/bin:/usr/sbin:$PATH
export CFLAGS=-I/sw/include
#export LDFLAGS=-L/sw/lib
Last login: Wed Mar 14 14:28:54 on ttyp1
Welcome to Darwin!
#export': not a valid identifier
#export': not a valid identifier
#export': not a valid identifier
#export': not a valid identifier
': not a valid identifier
Zork:~ rd$
well well well ... what did I learn?
(other than to comment that line out)
Yields: -
ABAP Dictionary Activation Ended with errors - View missing
[http://www.flickr.com/photos/38387539@N02/4393402777/]
[http://www.flickr.com/photos/38387539@N02/4393402771/]
Hi All,
I transported a table with additional new fields to production system but the transport log shows that
the table could not be activated due to missing View /1SAP1/CNV_S0355.
Does anyone know the root cause for this?
When i check the table status in production system, it's active and the new field is added to the table
successfully. Nothing is missing or no serious issue arise when data was maintained in the field.Hi Chong vui chung ,
Open that Custom table in Developement environment and click on Activate.
Check if it displaying any activation errors.
ALso check the following :
Open the Custom table > Click on Utilites>Click on Enhancement Category --> Click on 'Can Be Enhanced (Deep)'
--> Click on OK.
And Activate again and see if you have any activate errors.
Regards,
Kittu -
Table QMEL is partially active ERROR AS Adjustment terminated in step 6
Dear all,
i have added some fields in qmel by using append structure but i am then i am trying to activate table via
tcode se14 but i am error message as Adjustment terminated in step 6.
Can any one help me on this...
Thanks
Sivakumar Ramakrishnan
Edited by: Siva Kumar on Feb 10, 2011 1:07 PM
Edited by: Siva Kumar on Feb 10, 2011 1:16 PMhi
just i added some fields in in append structure and then i tried to active table qmel in SE14 but i am getting error message
Adjustment terminated in step 6
Conversion could not be restarted
TABL QMEL already exists
Renaming of table QCM8QMEL to QMEL failed
Error in step QMEL-STEP6
Thanks
siva -
Task 0085 for parallel SID assignment terminated with errors
Hi,
While activating the ODS object we are getting the following error
Task 0085 for parallel SID assignment terminated with errors
Can anyone help me on this issue.
Thanks
Sheela DatlaHi Sheela,
Does the problem happen with activating the ODS object (definition) itself or with activating the data in the
ODS? I think that there must be other errors apart from Task 0085. At the time of the error you should check in
sm21 and st22 for additional error messages and dumps. If the problem is with the activation of data in the ODS
you should also check sm37 for the job that is created for the ODS activation , you may find more detailed
information in the job log. You should also check the activation step in the 'Details' TAB in the monitor for
the load there may also be more detailed information here.
In transaction rscusta2 (ODS customizing) you should try the following setting for the activation:
No. of Par. Proc. 3
Min. No. Data Recs. 10000
Wait Time in Sec. 600
Before changing the values you have in RSCUSTA2 please take note of the values you have already in
case you want to change them back.
Best Regards,
Des. -
ORA-00472: PMON process terminated with error
Hi,
I got this error in alert log.But the clients didn't complain they had a downtime.But in alert log I see the following.Why the db got restarted and why the clients could not notice it.Can somebody please reply why this has happened.
Mon Jul 18 12:28:02 2011
ARC1: terminating instance due to error 472
Mon Jul 18 12:28:03 2011
Errors in file /backups/p01/app/oracle/admin/plsprod/bdump/plsprod_lns1_3772752.trc:
ORA-00472: PMON process terminated with error
Instance terminated by ARC1, pid = 2306362
Mon Jul 18 12:28:52 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Autotune of undo retention is turned on.
IMODE=BR
ILAT =242
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 2000
shared_pool_size = 536870912
large_pool_size = 54525952
java_pool_size = 75497472
streams_pool_size = 54525952
control_files = /data/plsprod/p02/control01.ctl, /data/plsprod/p03/control02.ctl, /data/plsprod/p04/control03.ctl
db_block_size = 8192
db_cache_size = 104857600
compatible = 10.2.0.3
log_archive_dest_1 = location=/data/plsprod/archredo MANDATORY REOPEN
log_archive_dest_2 = SERVICE=talon_plsprod.travimp.com LGWR ASYNC NOAFFIRM REOPEN=60 NODELAY
log_archive_dest_state_1 = enable
log_archive_dest_state_2 = enable
standby_archive_dest = /data/plsprod/archredo
log_archive_format = redo_plsprod_%r_%t_%s.arc
log_buffer = 6120448
fast_start_mttr_target = 30
undo_management = AUTO
undo_tablespace = plsprod_undo
undo_retention = 1500
remote_login_passwordfile= EXCLUSIVE
db_domain = travimp.com
instance_name = plsprod
service_names = plsprod.travimp.com
local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=catalina)(PORT=1521))
background_dump_dest = /backups/p01/app/oracle/admin/plsprod/bdump
user_dump_dest = /backups/p01/app/oracle/admin/plsprod/udump
core_dump_dest = /backups/p01/app/oracle/admin/plsprod/cdump
session_max_open_files = 60
sort_area_size = 1048576
sort_area_retained_size = 1048576
db_name = plsprod
open_cursors = 100
os_authent_prefix =
pga_aggregate_target = 26214400
aq_tm_processes = 0
PMON started with pid=2, OS id=5623926
PSP0 started with pid=3, OS id=5566632
MMAN started with pid=4, OS id=5328992
DBW0 started with pid=5, OS id=4362640
DBW1 started with pid=6, OS id=4808940
LGWR started with pid=7, OS id=4358468
CKPT started with pid=8, OS id=4784160
SMON started with pid=9, OS id=4354538
RECO started with pid=10, OS id=4313420
MMON started with pid=11, OS id=4771908
MMNL started with pid=12, OS id=4743272
Mon Jul 18 12:28:53 2011
ALTER DATABASE MOUNT
Mon Jul 18 12:28:57 2011
Setting recovery target incarnation to 1
Mon Jul 18 12:28:57 2011
Successful mount of redo thread 1, with mount id 2894903685
Mon Jul 18 12:28:57 2011
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Jul 18 12:28:58 2011
ALTER DATABASE OPEN
Mon Jul 18 12:28:58 2011
Beginning crash recovery of 1 threads
parallel recovery started with 15 processes
Mon Jul 18 12:28:58 2011
Started redo scan
Mon Jul 18 12:28:58 2011
Completed redo scan
1696 redo blocks read, 56 data blocks need recovery
Mon Jul 18 12:28:58 2011
Started redo application at
Thread 1: logseq 17759, block 26354
Mon Jul 18 12:28:58 2011
Recovery of Online Redo Log: Thread 1 Group 1 Seq 17759 Reading mem 0
Mem# 0: /data/plsprod/p01/redo_t1_g1_f1.log
Mem# 1: /data/plsprod/p02/redo_t1_g1_f2.log
Mon Jul 18 12:28:58 2011
Completed redo application
Mon Jul 18 12:28:58 2011
Completed crash recovery at
Thread 1: logseq 17759, block 28050, scn 35195499598
56 data blocks read, 56 data blocks written, 1696 redo blocks read
Mon Jul 18 12:28:58 2011
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=29, OS id=4338022
Mon Jul 18 12:28:58 2011
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=30, OS id=1081522
LNS1 started with pid=31, OS id=5537854
Mon Jul 18 12:29:01 2011
Thread 1 advanced to log sequence 17760
Thread 1 opened at log sequence 17760
Current log# 2 seq# 17760 mem# 0: /data/plsprod/p01/redo_t1_g2_f1.log
Current log# 2 seq# 17760 mem# 1: /data/plsprod/p02/redo_t1_g2_f2.log
Successful open of redo thread 1
Mon Jul 18 12:29:01 2011
ARC0: STARTING ARCH PROCESSES
Mon Jul 18 12:29:01 2011
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Jul 18 12:29:01 2011
SMON: enabling cache recovery
Mon Jul 18 12:29:02 2011
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=32, OS id=5644370
Mon Jul 18 12:29:02 2011
ARC0: Standby redo logfile selected for thread 1 sequence 17759 for destination LOG_ARCHIVE_DEST_2
Mon Jul 18 12:29:02 2011
LGWR: Setting 'active' archival for destination LOG_ARCHIVE_DEST_2
Mon Jul 18 12:29:03 2011
Successfully onlined Undo Tablespace 16.
Mon Jul 18 12:29:03 2011
SMON: enabling tx recovery
Mon Jul 18 12:29:03 2011
Database Characterset is US7ASCII
replication_dependency_tracking turned off (no async multimaster replication found)
WARNING: AQ_TM_PROCESSES is set to 0. System operation might be adversely affected.
Completed: ALTER DATABASE OPEN
Mon Jul 18 12:29:58 2011
Shutting down archive processes
Mon Jul 18 12:30:03 2011
ARCH shutting down
ARC2: Archival stoppedHi CKPT,
Please find the output of the trace file as below.I deleted the repetitive output "Attempting to send buffer 0x111441d30 start block 91942 block count 84
total size to send 43008 blocksize 512" as it exceeds maximum length of 30000 characters in this post.
CATALINA_mardiprd>cat /backups/p01/app/oracle/admin/plsprod/bdump/plsprod_lns1_3772752.trc
/backups/p01/app/oracle/admin/plsprod/bdump/plsprod_lns1_3772752.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /p01/app/oracle10g/product/10.2.0.3
System name: AIX
Node name: catalina
Release: 3
Version: 5
Machine: 00044C5FD600
Instance name: plsprod
Redo thread mounted by this instance: 1
Oracle process number: 16
Unix process pid: 3772752, image: oracle@catalina (LNS1)
*** SERVICE NAME:() 2011-07-18 09:42:11.573
*** SESSION ID:(2189.1) 2011-07-18 09:42:11.573
*** 2011-07-18 09:42:11.573 57516 kcrr.c
LNS1: initializing for LGWR communication
LNS1: connecting to KSR channel
Success
LNS1: subscribing to KSR channel
Success
*** 2011-07-18 09:42:11.574 57569 kcrr.c
LNS1: initialized successfully ASYNC=1
Destination is specified with ASYNC=61440
*** 2011-07-18 09:42:12.577 71560 kcrr.c
Sending online log thread 1 seq 17731 [logfile 3] to standby
Opening logfile [logno 3]
Redo shipping client performing standby login
*** 2011-07-18 09:42:12.693 65194 kcrr.c
Logged on to standby successfully
Client logon and security negotiation successful!
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Allocate ASYNC blocks: Previous blocks=0 New blocks=20480
Log file opened [logno 3]
Attempting to send buffer 0x111441d30 start block 2 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 3 block count 35
total size to send 17920 blocksize 512
*** 2011-07-18 09:42:27.009
Attempting to send buffer 0x111441d30 start block 38 block count 2914
total size to send 1491968 blocksize 512
*** 2011-07-18 09:42:50.007
Attempting to send buffer 0x111441d30 start block 2952 block count 2
total size to send 1024 blocksize 512
*** 2011-07-18 09:43:01.441
Attempting to send buffer 0x111441d30 start block 2954 block count 19286
total size to send 9874432 blocksize 512
Attempting to send buffer 0x111441d30 start block 22240 block count 19657
total size to send 10064384 blocksize 512
Attempting to send buffer 0x111441d30 start block 41897 block count 1687
total size to send 863744 blocksize 512
*** 2011-07-18 09:43:13.007
Attempting to send buffer 0x111441d30 start block 43584 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 43585 block count 13
total size to send 6656 blocksize 512
Attempting to send buffer 0x111441d30 start block 43598 block count 19008
total size to send 9732096 blocksize 512
*** 2011-07-18 09:43:24.265
Attempting to send buffer 0x111441d30 start block 62606 block count 19349
total size to send 9906688 blocksize 512
*** 2011-07-18 09:43:25.524 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:43:25.524 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 81955 block count 10066
total size to send 5153792 blocksize 512
Online entry still exists for log 3 thr 1 seq 17731. Using it
Closing thread 1 sequence 17731 logno 3 nab 92021 los 35193489640 nxs 35193490559
*** 2011-07-18 09:43:26.686 71560 kcrr.c
Sending online log thread 1 seq 17732 [logfile 1] to standby
Opening logfile [logno 1]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 1]
Attempting to send buffer 0x111441d30 start block 2 block count 20407
total size to send 10448384 blocksize 512
Attempting to send buffer 0x111441d30 start block 20409 block count 20349
total size to send 10418688 blocksize 512
Attempting to send buffer 0x111441d30 start block 40758 block count 19751
total size to send 10112512 blocksize 512
Attempting to send buffer 0x111441d30 start block 60509 block count 20260
total size to send 10373120 blocksize 512
*** 2011-07-18 09:43:33.262 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:43:33.262 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 80769 block count 11251
total size to send 5760512 blocksize 512
Online entry still exists for log 1 thr 1 seq 17732. Using it
Closing thread 1 sequence 17732 logno 1 nab 92020 los 35193490559 nxs 35193490735
*** 2011-07-18 09:43:33.541 71560 kcrr.c
Sending online log thread 1 seq 17733 [logfile 2] to standby
Opening logfile [logno 2]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
*** 2011-07-18 09:43:34.387
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 2]
Attempting to send buffer 0x111441d30 start block 2 block count 19192
total size to send 9826304 blocksize 512
Attempting to send buffer 0x111441d30 start block 19194 block count 18876
total size to send 9664512 blocksize 512
Attempting to send buffer 0x111441d30 start block 38070 block count 19565
total size to send 10017280 blocksize 512
Attempting to send buffer 0x111441d30 start block 57635 block count 19765
total size to send 10119680 blocksize 512
*** 2011-07-18 09:43:41.660 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:43:41.660 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 77400 block count 14627
total size to send 7489024 blocksize 512
Online entry still exists for log 2 thr 1 seq 17733. Using it
Closing thread 1 sequence 17733 logno 2 nab 92027 los 35193490735 nxs 35193490800
*** 2011-07-18 09:43:41.928 71560 kcrr.c
Sending online log thread 1 seq 17734 [logfile 3] to standby
Opening logfile [logno 3]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 3]
Attempting to send buffer 0x111441d30 start block 59038 block count 18758
total size to send 9604096 blocksize 512
*** 2011-07-18 09:44:42.141
*** 2011-07-18 09:44:42.141 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:44:42.142 72204 kcrr.c
Detected physical end of file
total size to send 586240 blocksize 512
Online entry still exists for log 1 thr 1 seq 17744. Using it
Closing thread 1 sequence 17744 logno 1 nab 92029 los 35193494218 nxs 35193494529
*** 2011-07-18 09:45:58.974 71560 kcrr.c
Sending online log thread 1 seq 17745 [logfile 2] to standby
Opening logfile [logno 2]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 2]
Attempting to send buffer 0x111441d30 start block 2 block count 9013
total size to send 4614656 blocksize 512
Attempting to send buffer 0x111441d30 start block 9015 block count 20176
total size to send 10330112 blocksize 512
Attempting to send buffer 0x111441d30 start block 29191 block count 19808
total size to send 10141696 blocksize 512
Attempting to send buffer 0x111441d30 start block 48999 block count 18939
total size to send 9696768 blocksize 512
*** 2011-07-18 09:46:10.146
Attempting to send buffer 0x111441d30 start block 67938 block count 19124
total size to send 9791488 blocksize 512
Attempting to send buffer 0x111441d30 start block 87062 block count 3690
total size to send 1889280 blocksize 512
*** 2011-07-18 09:46:12.644 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:46:12.644 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 90752 block count 1267
total size to send 648704 blocksize 512
Online entry still exists for log 2 thr 1 seq 17745. Using it
Closing thread 1 sequence 17745 logno 2 nab 92019 los 35193494529 nxs 35193494940
*** 2011-07-18 09:46:13.690 71560 kcrr.c
Sending online log thread 1 seq 17746 [logfile 3] to standby
Opening logfile [logno 3]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 3]
Attempting to send buffer 0x111441d30 start block 2 block count 19533
total size to send 10000896 blocksize 512
Attempting to send buffer 0x111441d30 start block 19535 block count 11151
total size to send 5709312 blocksize 512
Attempting to send buffer 0x111441d30 start block 30686 block count 20154
total size to send 10318848 blocksize 512
*** 2011-07-18 09:46:20.822
Attempting to send buffer 0x111441d30 start block 50840 block count 19083
total size to send 9770496 blocksize 512
Attempting to send buffer 0x111441d30 start block 69923 block count 19167
total size to send 9813504 blocksize 512
*** 2011-07-18 09:46:22.573 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:46:22.573 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 89090 block count 2933
total size to send 1501696 blocksize 512
Online entry still exists for log 3 thr 1 seq 17746. Using it
Closing thread 1 sequence 17746 logno 3 nab 92023 los 35193494940 nxs 35193495191
*** 2011-07-18 09:46:23.637 71560 kcrr.c
Sending online log thread 1 seq 17747 [logfile 1] to standby
Opening logfile [logno 1]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 1]
Attempting to send buffer 0x111441d30 start block 2 block count 8093
total size to send 4143616 blocksize 512
Attempting to send buffer 0x111441d30 start block 8095 block count 20288
total size to send 10387456 blocksize 512
Attempting to send buffer 0x111441d30 start block 28383 block count 18967
total size to send 9711104 blocksize 512
*** 2011-07-18 09:46:31.007
Attempting to send buffer 0x111441d30 start block 47350 block count 5237
total size to send 2681344 blocksize 512
Attempting to send buffer 0x111441d30 start block 52587 block count 20188
total size to send 10336256 blocksize 512
Attempting to send buffer 0x111441d30 start block 72775 block count 19167
total size to send 9813504 blocksize 512
*** 2011-07-18 09:46:37.430 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:46:37.430 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 91942 block count 84
total size to send 43008 blocksize 512
Online entry still exists for log 1 thr 1 seq 17747. Using it
Closing thread 1 sequence 17747 logno 1 nab 92026 los 35193495191 nxs 35193495503
*** 2011-07-18 09:46:37.501 71560 kcrr.c
Sending online log thread 1 seq 17748 [logfile 2] to standby
Opening logfile [logno 2]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 2]
Attempting to send buffer 0x111441d30 start block 2 block count 2052
total size to send 1050624 blocksize 512
*** 2011-07-18 09:46:43.059
total size to send 8164352 blocksize 512
*** 2011-07-18 09:48:18.781
*** 2011-07-18 09:48:18.781 72367 kcrr.c
Detected proper completion of online log
**** 2011-07-18 09:48:18.781 72204 kcrr.c*
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 90604 block count 1416
total size to send 724992 blocksize 512
Online entry still exists for log 2 thr 1 seq 17754. Using it
Closing thread 1 sequence 17754 logno 2 nab 92020 los 35193496751 nxs 35193496934
**** 2011-07-18 09:48:19.891 71560 kcrr.c*
*Sending online log thread 1 seq 17755 [logfile 3] to standby*
*Opening logfile [logno 3]*
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
*Log file opened [logno 3]*
Attempting to send buffer 0x111441d30 start block 2 block count 19248
total size to send 9854976 blocksize 512
Attempting to send buffer 0x111441d30 start block 19250 block count 20166
total size to send 10324992 blocksize 512
Attempting to send buffer 0x111441d30 start block 39416 block count 4955
total size to send 2536960 blocksize 512
Attempting to send buffer 0x111441d30 start block 44371 block count 19903
total size to send 10190336 blocksize 512
*** 2011-07-18 09:48:30.215
Attempting to send buffer 0x111441d30 start block 64274 block count 19991
total size to send 10235392 blocksize 512
*** 2011-07-18 09:48:32.370 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:48:32.370 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 84265 block count 7754
total size to send 3970048 blocksize 512
Online entry still exists for log 3 thr 1 seq 17755. Using it
Closing thread 1 sequence 17755 logno 3 nab 92019 los 35193496934 nxs 35193498387
*** 2011-07-18 09:48:32.472 71560 kcrr.c
Sending online log thread 1 seq 17756 [logfile 1] to standby
Opening logfile [logno 1]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 1]
Attempting to send buffer 0x111441d30 start block 2 block count 19214
total size to send 9837568 blocksize 512
*** 2011-07-18 09:48:40.267
Attempting to send buffer 0x111441d30 start block 19216 block count 19981
total size to send 10230272 blocksize 512
Attempting to send buffer 0x111441d30 start block 39197 block count 19586
total size to send 10028032 blocksize 512
Attempting to send buffer 0x111441d30 start block 58783 block count 6569
total size to send 3363328 blocksize 512
Attempting to send buffer 0x111441d30 start block 65352 block count 19894
total size to send 10185728 blocksize 512
*** 2011-07-18 09:48:47.133 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:48:47.133 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 85246 block count 6772
total size to send 3467264 blocksize 512
Online entry still exists for log 1 thr 1 seq 17756. Using it
Closing thread 1 sequence 17756 logno 1 nab 92018 los 35193498387 nxs 35193500455
*** 2011-07-18 09:48:47.344 71560 kcrr.c
Sending online log thread 1 seq 17757 [logfile 2] to standby
Opening logfile [logno 2]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 2]
*** 2011-07-18 09:48:50.302
Attempting to send buffer 0x111441d30 start block 2 block count 18546
total size to send 9495552 blocksize 512
Attempting to send buffer 0x111441d30 start block 18548 block count 19821
total size to send 10148352 blocksize 512
Attempting to send buffer 0x111441d30 start block 38369 block count 20457
total size to send 10473984 blocksize 512
*** 2011-07-18 09:49:02.194
Attempting to send buffer 0x111441d30 start block 58826 block count 20477
total size to send 10484224 blocksize 512
Attempting to send buffer 0x111441d30 start block 79303 block count 12397
total size to send 6347264 blocksize 512
*** 2011-07-18 09:49:08.443 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 09:49:08.443 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 91700 block count 333
total size to send 170496 blocksize 512
Online entry still exists for log 2 thr 1 seq 17757. Using it
Closing thread 1 sequence 17757 logno 2 nab 92033 los 35193500455 nxs 35193504614
*** 2011-07-18 09:49:08.549 71560 kcrr.c
Sending online log thread 1 seq 17758 [logfile 3] to standby
Opening logfile [logno 3]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 3]
Attempting to send buffer 0x111441d30 start block 2 block count 19640
total size to send 10055680 blocksize 512
*** 2011-07-18 09:49:15.005
Attempting to send buffer 0x111441d30 start block 19642 block count 12646
total size to send 6474752 blocksize 512
Attempting to send buffer 0x111441d30 start block 92000 block count 23
total size to send 11776 blocksize 512
*** 2011-07-18 11:30:19.515 72367 kcrr.c
Detected proper completion of online log
*** 2011-07-18 11:30:19.515 72204 kcrr.c
Detected physical end of file
Attempting to send buffer 0x111441d30 start block 92023 block count 11
total size to send 5632 blocksize 512
Online entry still exists for log 3 thr 1 seq 17758. Using it
Closing thread 1 sequence 17758 logno 3 nab 92034 los 35193504614 nxs 35194291751
*** 2011-07-18 11:30:21.546 71560 kcrr.c
Sending online log thread 1 seq 17759 [logfile 1] to standby
Opening logfile [logno 1]
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Archiving to destination talon_plsprod.travimp.com ASYNC blocks=20480
Log file opened [logno 1]
Attempting to send buffer 0x111441d30 start block 2 block count 24
total size to send 12288 blocksize 512
*** 2011-07-18 11:30:27.006
Attempting to send buffer 0x111441d30 start block 26 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 27 block count 34
total size to send 17408 blocksize 512
Attempting to send buffer 0x111441d30 start block 61 block count 31
total size to send 15872 blocksize 512
*** 2011-07-18 11:30:39.003
Attempting to send buffer 0x111441d30 start block 92 block count 32
total size to send 16384 blocksize 512
Attempting to send buffer 0x111441d30 start block 124 block count 2
total size to send 1024 blocksize 512
Attempting to send buffer 0x111441d30 start block 126 block count 1
total size to send 512 blocksize 512
*** 2011-07-18 11:30:51.000
Attempting to send buffer 0x111441d30 start block 127 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 128 block count 30
total size to send 15360 blocksize 512
Attempting to send buffer 0x111441d30 start block 158 block count 88
total size to send 45056 blocksize 512
Attempting to send buffer 0x111441d30 start block 246 block count 3
total size to send 1536 blocksize 512
*** 2011-07-18 11:31:03.002
Attempting to send buffer 0x111441d30 start block 249 block count 32
total size to send 16384 blocksize 512
Attempting to send buffer 0x111441d30 start block 27416 block count 4
total size to send 2048 blocksize 512
Attempting to send buffer 0x111441d30 start block 27420 block count 14
total size to send 7168 blocksize 512
Attempting to send buffer 0x111441d30 start block 27434 block count 54
total size to send 27648 blocksize 512
Attempting to send buffer 0x111441d30 start block 27488 block count 10
total size to send 5120 blocksize 512
*** 2011-07-18 12:27:01.000
Attempting to send buffer 0x111441d30 start block 27498 block count 78
total size to send 39936 blocksize 512
Attempting to send buffer 0x111441d30 start block 27576 block count 2
total size to send 1024 blocksize 512
Attempting to send buffer 0x111441d30 start block 27578 block count 56
total size to send 28672 blocksize 512
Attempting to send buffer 0x111441d30 start block 27634 block count 60
total size to send 30720 blocksize 512
*** 2011-07-18 12:27:14.006
Attempting to send buffer 0x111441d30 start block 27694 block count 7
total size to send 3584 blocksize 512
Attempting to send buffer 0x111441d30 start block 27701 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 27702 block count 106
total size to send 54272 blocksize 512
*** 2011-07-18 12:27:28.001
Attempting to send buffer 0x111441d30 start block 27808 block count 2
total size to send 1024 blocksize 512
Attempting to send buffer 0x111441d30 start block 27810 block count 37
total size to send 18944 blocksize 512
Attempting to send buffer 0x111441d30 start block 27847 block count 2
total size to send 1024 blocksize 512
*** 2011-07-18 12:27:42.002
Attempting to send buffer 0x111441d30 start block 27849 block count 78
total size to send 39936 blocksize 512
Attempting to send buffer 0x111441d30 start block 27927 block count 43
total size to send 22016 blocksize 512
*** 2011-07-18 12:27:52.001
Attempting to send buffer 0x111441d30 start block 27970 block count 1
total size to send 512 blocksize 512
Attempting to send buffer 0x111441d30 start block 27971 block count 2
total size to send 1024 blocksize 512
Attempting to send buffer 0x111441d30 start block 27973 block count 38
total size to send 19456 blocksize 512
*** 2011-07-18 12:28:03.007
ORA-00472: PMON process terminated with error
Closing Redo Read Context
Redo Push Server: Freeing ASYNC PGA buffer
LNS1: Doing a channel reset for next time around...
Please help me out. -
SMON process terminated with error
Hi,
Oracle Version:10.2.0.3
Operating system:Linux
I alert log file i found that smon process was terminated with error.Below is the contents of the alert log file.
Fri Dec 31 05:12:32 2010
sculkget: failed to lock /home/oracle/oracle/oracle/product/10.2.0/db_1/dbs/lkinstqfundeca exclusive
sculkget: lock held by PID: 9127
Oracle Instance Shutdown operation failed. Another process may be attempting to startup or shutdown this Instance.
Failed to acquire instance startup/shutdown serialization primitive
Fri Dec 31 05:56:23 2010
sculkget: failed to lock /home/oracle/oracle/oracle/product/10.2.0/db_1/dbs/lkinstqfundeca exclusive
sculkget: lock held by PID: 9127
Oracle Instance Shutdown operation failed. Another process may be attempting to startup or shutdown this Instance.
Failed to acquire instance startup/shutdown serialization primitive
Fri Dec 31 06:40:53 2010
WARNING: inbound connection timed out (ORA-3136)
Fri Dec 31 06:40:53 2010
WARNING: inbound connection timed out (ORA-3136)
Fri Dec 31 06:40:53 2010
WARNING: inbound connection timed out (ORA-3136)
Fri Dec 31 06:40:53 2010
WARNING: inbound connection timed out (ORA-3136)
Fri Dec 31 06:40:53 2010
WARNING: inbound connection timed out (ORA-3136)
Fri Dec 31 06:40:53 2010
WARNING: inbound connection timed out (ORA-3136)
Fri Dec 31 06:40:53 2010
WARNING: inbound connection timed out (ORA-3136)
Fri Dec 31 06:40:53 2010
MMNL absent for 7904 secs; Foregrounds taking over
Fri Dec 31 06:40:53 2010
Starting background process EMN0
Fri Dec 31 06:40:53 2010
The value (30) of MAXTRANS parameter ignored.
Fri Dec 31 06:40:53 2010
Thread 1 cannot allocate new log, sequence 62004
Checkpoint not complete
Current log# 1 seq# 62003 mem# 0: /u02/oradata/qfundeca/redo01a.log
Current log# 1 seq# 62003 mem# 1: /u03/oradata/qfundeca/redo01b.log
EMN0 started with pid=29, OS id=7176
Fri Dec 31 06:40:53 2010
Shutting down instance: further logons disabled
Fri Dec 31 06:40:53 2010
ksvcreate: Process(m001) creation failed
Fri Dec 31 06:40:53 2010
kkjcre1p: unable to spawn jobq slave process, error 1089
Fri Dec 31 06:40:53 2010
kkjcre1p: unable to spawn jobq slave process, error 1089
Fri Dec 31 06:40:54 2010
Stopping background process QMNC
Fri Dec 31 06:40:54 2010
Stopping background process CJQ0
Fri Dec 31 06:40:54 2010
Thread 1 cannot allocate new log, sequence 62004
Private strand flush not complete
Current log# 1 seq# 62003 mem# 0: /u02/oradata/qfundeca/redo01a.log
Current log# 1 seq# 62003 mem# 1: /u03/oradata/qfundeca/redo01b.log
Fri Dec 31 06:40:56 2010
Stopping background process MMNL
Fri Dec 31 06:40:56 2010
Thread 1 advanced to log sequence 62004
Current log# 2 seq# 62004 mem# 0: /u02/oradata/qfundeca/redo02a.log
Current log# 2 seq# 62004 mem# 1: /u03/oradata/qfundeca/redo02b.log
Fri Dec 31 06:40:57 2010
Starting background process QMNC
Fri Dec 31 06:40:57 2010
Errors in file /home/oracle/oracle/admin/qfundeca/udump/qfundeca_ora_3065.trc:
ORA-00443: background process "QMNC" did not start
Fri Dec 31 06:41:04 2010
Stopping background process MMON
Fri Dec 31 06:41:05 2010
Errors in file /home/oracle/oracle/admin/qfundeca/udump/qfundeca_ora_9127.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Fri Dec 31 06:41:05 2010
Shutting down instance (immediate)
License high water mark = 93
Fri Dec 31 06:41:05 2010
Stopping Job queue slave processes
Fri Dec 31 06:41:05 2010
Job queue slave processes stopped
Fri Dec 31 06:41:57 2010
All dispatchers and shared servers shutdown
Fri Dec 31 06:41:59 2010
ALTER DATABASE CLOSE NORMAL
Fri Dec 31 06:41:59 2010
SMON: disabling tx recovery
SMON: disabling cache recovery
Fri Dec 31 06:42:00 2010
Shutting down archive processes
Archiving is disabled
Fri Dec 31 06:42:05 2010
ARCH shutting down
ARC1: Archival stopped
Fri Dec 31 06:42:11 2010
ARCH shutting down
ARC0: Archival stopped
Fri Dec 31 06:42:12 2010
Thread 1 closed at log sequence 62004
Successful close of redo thread 1
Fri Dec 31 06:42:12 2010
Completed: ALTER DATABASE CLOSE NORMAL
Fri Dec 31 06:42:12 2010
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri Dec 31 06:49:52 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 150
sessions = 250
__shared_pool_size = 385875968
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 33554432
streams_pool_size = 33554432
sga_target = 1610612736
control_files = /u02/oradata/qfundeca/control01.ctl, /u02/oradata/qfundeca/control02.ctl, /u03/oradata/qfundeca/control03.ctl
db_block_size = 8192
__db_cache_size = 1140850688
compatible = 10.2.0.3.0
log_archive_dest_1 = LOCATION=/u02/oradata/arch/qfundeca
log_archive_format = %t_%s_%r.dbf
archive_lag_target = 2700
db_file_multiblock_read_count= 16
db_recovery_file_dest = /u02/oradata/flash_recovery_area
db_recovery_file_dest_size= 21474836480
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=qfundecaXDB)
job_queue_processes = 17
cursor_sharing = EXACT
background_dump_dest = /home/oracle/oracle/admin/qfundeca/bdump
user_dump_dest = /home/oracle/oracle/admin/qfundeca/udump
core_dump_dest = /home/oracle/oracle/admin/qfundeca/cdump
audit_file_dest = /home/oracle/oracle/admin/qfundeca/adump
db_name = qfundeca
open_cursors = 300
pga_aggregate_target = 839909376
PMON started with pid=2, OS id=9591
PSP0 started with pid=3, OS id=9593
MMAN started with pid=4, OS id=9595
DBW0 started with pid=5, OS id=9597
LGWR started with pid=6, OS id=9599
CKPT started with pid=7, OS id=9601
SMON started with pid=8, OS id=9603
RECO started with pid=9, OS id=9605
CJQ0 started with pid=10, OS id=9607
MMON started with pid=11, OS id=9609
Fri Dec 31 06:49:54 2010
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=9611
Fri Dec 31 06:49:54 2010
starting up 1 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Dec 31 06:49:54 2010
ALTER DATABASE MOUNT
Fri Dec 31 06:49:58 2010
Setting recovery target incarnation to 1
Fri Dec 31 06:49:58 2010
Successful mount of redo thread 1, with mount id 256948178
Fri Dec 31 06:49:58 2010
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Dec 31 06:49:58 2010
ALTER DATABASE OPEN
Fri Dec 31 06:49:58 2010
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=16, OS id=9619
Fri Dec 31 06:49:58 2010
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=17, OS id=9621
Fri Dec 31 06:49:58 2010
Thread 1 opened at log sequence 62004
Current log# 2 seq# 62004 mem# 0: /u02/oradata/qfundeca/redo02a.log
Current log# 2 seq# 62004 mem# 1: /u03/oradata/qfundeca/redo02b.log
Successful open of redo thread 1
Fri Dec 31 06:49:58 2010
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
Fri Dec 31 06:49:58 2010
ARC1: Becoming the heartbeat ARCH
Fri Dec 31 06:49:58 2010
SMON: enabling cache recovery
Fri Dec 31 06:49:58 2010
Successfully onlined Undo Tablespace 1.
Fri Dec 31 06:49:58 2010
SMON: enabling tx recovery
Fri Dec 31 06:49:58 2010
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=18, OS id=9623
Fri Dec 31 06:49:59 2010
Errors in file /home/oracle/oracle/admin/qfundeca/udump/qfundeca_ora_9617.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Fri Dec 31 06:50:00 2010
Completed: ALTER DATABASE OPEN
Fri Dec 31 06:50:00 2010
db_recovery_file_dest_size of 20480 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Dec 31 06:55:59 2010
The value (30) of MAXTRANS parameter ignored.
kupprdp: master process DM00 started with pid=36, OS id=12004
to execute - SYS.KUPM$MCP.MAIN('QFUNDECA_PROD_BKP', 'QFUNDECAPROD', 'KUPC$C_1_20101231065559', 'KUPC$S_1_20101231065559', 0);
kupprdp: worker process DW01 started with worker id=1, pid=37, OS id=12009
to execute - SYS.KUPW$WORKER.MAIN('QFUNDECA_PROD_BKP', 'QFUNDECAPROD');
Fri Dec 31 07:04:59 2010
Thread 1 cannot allocate new log, sequence 62005
Private strand flush not complete
Current log# 2 seq# 62004 mem# 0: /u02/oradata/qfundeca/redo02a.log
Current log# 2 seq# 62004 mem# 1: /u03/oradata/qfundeca/redo02b.log
Thread 1 advanced to log sequence 62005
Current log# 3 seq# 62005 mem# 0: /u02/oradata/qfundeca/redo03a.log
Current log# 3 seq# 62005 mem# 1: /u03/oradata/qfundeca/redo03b.log
Fri Dec 31 07:30:01 2010
Thread 1 cannot allocate new log, sequence 62006
Private strand flush not complete
Current log# 3 seq# 62005 mem# 0: /u02/oradata/qfundeca/redo03a.log
Current log# 3 seq# 62005 mem# 1: /u03/oradata/qfundeca/redo03b.log
Thread 1 advanced to log sequence 62006
Current log# 1 seq# 62006 mem# 0: /u02/oradata/qfundeca/redo01a.log
Current log# 1 seq# 62006 mem# 1: /u03/oradata/qfundeca/redo01b.log
Fri Dec 31 07:54:42 2010
System State dumped to trace file /home/oracle/oracle/admin/qfundeca/udump/qfundeca_ora_24979.trc
Fri Dec 31 07:55:06 2010
System State dumped to trace file /home/oracle/oracle/admin/qfundeca/udump/qfundeca_ora_25057.trc
Fri Dec 31 07:55:37 2010
System State dumped to trace file /home/oracle/oracle/admin/qfundeca/udump/qfundeca_ora_25209.trc
Fri Dec 31 07:59:33 2010
System State dumped to trace file /home/oracle/oracle/admin/qfundeca/udump/qfundeca_ora_26237.trc
Fri Dec 31 08:00:25 2010
System State dumped to trace file /home/oracle/oracle/admin/qfundeca/udump/qfundeca_ora_26523.trc
Fri Dec 31 08:00:40 2010
System State dumped to trace file /home/oracle/oracle/admin/qfundeca/udump/qfundeca_ora_26909.trc
Fri Dec 31 08:06:34 2010
Errors in file /home/oracle/oracle/admin/qfundeca/bdump/qfundeca_pmon_9591.trc:
*ORA-00474: SMON process terminated with error*
*Fri Dec 31 08:06:34 2010*
*PMON: terminating instance due to error 474*
Instance terminated by PMON, pid = 9591
Fri Dec 31 08:08:31 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =27
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 150
sessions = 250
__shared_pool_size = 234881024
__large_pool_size = 16777216
__java_pool_size = 16777216
__streams_pool_size = 33554432
streams_pool_size = 33554432
sga_target = 1610612736
control_files = /u02/oradata/qfundeca/control01.ctl, /u02/oradata/qfundeca/control02.ctl, /u03/oradata/qfundeca/control03.ctl
db_block_size = 8192
__db_cache_size = 1291845632
compatible = 10.2.0.3.0
log_archive_dest_1 = LOCATION=/u02/oradata/arch/qfundeca
log_archive_format = %t_%s_%r.dbf
archive_lag_target = 2700
db_file_multiblock_read_count= 16
db_recovery_file_dest = /u02/oradata/flash_recovery_area
db_recovery_file_dest_size= 21474836480
standby_file_management = AUTO
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=qfundecaXDB)
job_queue_processes = 17
cursor_sharing = EXACT
background_dump_dest = /home/oracle/oracle/admin/qfundeca/bdump
user_dump_dest = /home/oracle/oracle/admin/qfundeca/udump
core_dump_dest = /home/oracle/oracle/admin/qfundeca/cdump
audit_file_dest = /home/oracle/oracle/admin/qfundeca/adump
db_name = qfundeca
open_cursors = 300
pga_aggregate_target = 839909376
PMON started with pid=2, OS id=648
PSP0 started with pid=3, OS id=650
MMAN started with pid=4, OS id=652
DBW0 started with pid=5, OS id=654
LGWR started with pid=6, OS id=656
CKPT started with pid=7, OS id=658
SMON started with pid=8, OS id=660
RECO started with pid=9, OS id=662
CJQ0 started with pid=10, OS id=664
MMON started with pid=11, OS id=666
Fri Dec 31 08:08:32 2010
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=12, OS id=668
Fri Dec 31 08:08:32 2010
starting up 1 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Dec 31 08:08:32 2010
ALTER DATABASE MOUNT
Fri Dec 31 08:08:36 2010
Setting recovery target incarnation to 1
Fri Dec 31 08:08:36 2010
Successful mount of redo thread 1, with mount id 257031232
Fri Dec 31 08:08:36 2010
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Fri Dec 31 08:08:36 2010
ALTER DATABASE OPEN
Fri Dec 31 08:08:37 2010
Beginning crash recovery of 1 threads
Fri Dec 31 08:08:37 2010
Started redo scan
Fri Dec 31 08:08:37 2010
Completed redo scan
31201 redo blocks read, 754 data blocks need recovery
Fri Dec 31 08:08:38 2010
Started redo application at
Thread 1: logseq 62004, block 66343
Fri Dec 31 08:08:38 2010
Recovery of Online Redo Log: Thread 1 Group 2 Seq 62004 Reading mem 0
Mem# 0: /u02/oradata/qfundeca/redo02a.log
Mem# 1: /u03/oradata/qfundeca/redo02b.log
Fri Dec 31 08:08:38 2010
Recovery of Online Redo Log: Thread 1 Group 3 Seq 62005 Reading mem 0
Mem# 0: /u02/oradata/qfundeca/redo03a.log
Mem# 1: /u03/oradata/qfundeca/redo03b.logHow to know what is the reason for this one.On that day the database hangs two time as i mentioned in my previous post.
Thanks & Regards,
Poorna Prasad.Hi Chinar,
Here is the contents for the file /home/oracle/oracle/admin/qfundeca/bdump/qfundeca_pmon_9591.trc
/home/oracle/oracle/admin/qfundeca/bdump/qfundeca_pmon_9591.trc
Oracle Database 10g Release 10.2.0.3.0 - Production
ORACLE_HOME = /home/oracle/oracle/oracle/product/10.2.0/db_1
System name: Linux
Node name: virqts2ora001.localdomain
Release: 2.6.9-5.ELsmp
Version: #1 SMP Wed Jan 5 19:30:39 EST 2005
Machine: i686
Instance name: qfundeca
Redo thread mounted by this instance: 1
Oracle process number: 2
Unix process pid: 9591, image: [email protected] (PMON)
*** 2010-12-31 08:06:34.723
*** SERVICE NAME:(SYS$BACKGROUND) 2010-12-31 08:06:34.723
*** SESSION ID:(250.1) 2010-12-31 08:06:34.723
Background process SMON found dead
Oracle pid = 8
OS pid (from detached process) = 9603
OS pid (from process state) = 9603
dtp = 0x2000ed88, proc = 0x7f3528a0
Dump of memory from 0x2000ED88 to 0x2000EDB4
2000ED80 0000007C 7F3528A0 [|....(5.]
2000ED90 00000000 00000000 4E4F4D53 00000200 [........SMON....]
2000EDA0 00002583 FFFFFFFF 00000001 5634F590 [.%............4V]
2000EDB0 00040081 [....]
Dump of memory from 0x7F3528A0 to 0x7F352E58
7F3528A0 00000102 00000000 00000000 00000000 [................]
7F3528B0 00000000 7F5FDF30 7F95787C 7F4C61E0 [....0._.|x...aL.]
7F3528C0 7F956AE4 00000000 7F956B48 7F956B48 [.j......Hk..Hk..]
7F3528D0 7F957870 00001601 7F4AA968 7F4C61E0 [px......h.J..aL.]
7F3528E0 00000008 7F4C7430 7F4C75B4 00000000 [....0tL..uL.....]
7F3528F0 7F5FCE18 7F5FDF48 00000000 00000000 [.._.H._.........]
7F352900 00000000 00000000 00000000 00000000 [................]
Repeat 2 times
7F352930 00000000 00000000 00000000 000C0000 [................]
7F352940 00000000 00080000 00000000 00050000 [................]
7F352950 00000000 00040000 00000000 00040000 [................]
7F352960 00000000 00080000 00000000 000C0000 [................]
7F352970 00000000 000C0000 00000000 00050000 [................]
7F352980 00000000 00110000 00000000 000F0000 [................]
7F352990 00000000 00000000 00000000 00000000 [................]
Repeat 3 times
7F3529D0 00000002 7F3529D4 7F3529D4 00000000 [.....)5..)5.....]
7F3529E0 00000001 00000000 7F3529E8 7F3529E8 [.........)5..)5.]
7F3529F0 00000000 00000000 00000000 00000000 [................]
Repeat 1 times
7F352A10 00000021 00000018 00000095 00000015 [!...............]
7F352A20 7F366E98 7F351D30 00010000 00000000 [.n6.0.5.........]
7F352A30 00000000 00000000 00000000 00000000 [................]
Repeat 1 times
7F352A50 00000000 00000000 00002583 00000000 [.........%......]
7F352A60 00000000 00000000 00000000 00000000 [................]
Repeat 2 times
7F352A90 00000000 00000000 7F3528A0 00000000 [.........(5.....]
7F352AA0 00000000 00000000 00000000 00000000 [................]
Repeat 6 times
7F352B10 00000000 7F352B14 7F352B14 00000000 [.....+5..+5.....]
7F352B20 00000000 00000001 00000000 00000000 [................]
7F352B30 3461800E 0000000C 00002583 FFFFFFFF [..a4.....%......]
7F352B40 B74796C0 00000000 00000000 00000000 [..G.............]
7F352B50 00000000 00000000 00000000 00000000 [................]
7F352B60 00000000 00000000 00000008 FFFFFFFF [................]
7F352B70 00000000 00000000 00000000 00000000 [................]
Repeat 7 times
7F352BF0 00000000 00000000 6361726F 0000656C [........oracle..]
7F352C00 00000000 00000000 00000000 00000000 [................]
7F352C10 00000000 00000000 00000006 71726976 [............virq]
7F352C20 6F327374 30306172 6F6C2E31 646C6163 [ts2ora001.locald]
7F352C30 69616D6F 0000006E 00000000 00000000 [omain...........]
7F352C40 00000000 00000000 00000000 00000000 [................]
7F352C50 00000000 00000000 00000000 00000019 [................]
7F352C60 4E4B4E55 004E574F 00000000 00000000 [UNKNOWN.........]
7F352C70 00000000 00000000 00000000 00000000 [................]
7F352C80 00000008 33303639 00000000 00000000 [....9603........]
7F352C90 00000000 00000000 00000000 00000004 [................]
7F352CA0 6361726F 7640656C 74717269 726F3273 [oracle@virqts2or]
7F352CB0 31303061 636F6C2E 6F646C61 6E69616D [a001.localdomain]
7F352CC0 4D532820 00294E4F 00000000 00000000 [ (SMON).........]
7F352CD0 00000027 00000002 00000001 7864736B ['...........ksdx]
7F352CE0 6B747366 312B2928 6B2D3C39 63786473 [fstk()+19<-ksdxc]
7F352CF0 2B292862 31323331 73732D3C 65737570 [b()+1321<-sspuse]
7F352D00 2B292872 3C323031 3930302D 41374131 [r()+102<-0091A7A]
7F352D10 00000032 00000000 00000000 00000000 [2...............]
7F352D20 00000000 00000000 00000000 00000000 [................]
Repeat 4 times
7F352D70 00000000 00000000 00000000 00060200 [................]
7F352D80 0000691D FFFFFFFF 00000000 00000000 [.i..............]
7F352D90 7F38693C 7F35334C 7F3527DC 00000000 [<i8.L35..'5.....]
7F352DA0 7F5D3CEC 00000000 00000000 00000000 [.<].............]
7F352DB0 00000000 00000000 00000000 00000000 [................]
7F352DC0 7F352DC0 7F352DC0 001B0000 00130000 [.-5..-5.........]
7F352DD0 00029615 0007CBB1 001E9615 0000EB2C [............,...]
7F352DE0 00000000 00005F28 00000000 0002C440 [....(_......@...]
7F352DF0 00000000 00000814 00000000 00000088 [................]
7F352E00 00000000 00000814 00000000 00000000 [................]
7F352E10 00000000 00000000 00000000 00000000 [................]
Repeat 3 times
7F352E50 00000000 00000003 [........]
error 474 detected in background process
ORA-00474: SMON process terminated with error -
Job RDDEXECL terminated with error.
Hi!
I am facing with hanging SPAM error in phase IMPORT_PROPER (patch of SAPKB70013 - SAPKB70016).
The SPAM patch terminates after a few sec. in DDIC activation action.
I have looked into log file and founded folllowing:
The job RDDEXECL terminated with error.
The reason seems to be sysntax error in program "CL_PROXY_SERVICE=======CP".
Futhermore I could detect that table SI_WD_FIRST_MAIN_SCREEN cannot be activated.
Can some one help me to solve this problem?
Of great interest was the following:
rescedule possibilities of job RDDEEXECL in order to contibue patch
start of SPAM or tp-commando by ignoring this error
Any helpful information will be very appreciated!
HolgerWhat do you mean with reimport?
I tried for almost 100 times to restart the import. -
'The termination occurred in system E03 with error code 403 and for the rea
hello gurus,
i am very new webdynpro for abap.i strucked in one place at the time of designe a webdynpro component.
i created one webdynpro component with one view.when i am going to design the view it is showing an error like .
Service cannot be reached.
'The termination occurred in system E03 with error code 403 and for the reason Forbidden'
for this we need to activate some service at sicf transaction level.
could anybody suggest me which service i need to activate to overcome my problem.
best regards,
raja.If you are creating webdynpro component for first time then check the below link and activate the service mentioned.
http://translate.google.co.in/translate?hl=en&sl=de&u=http://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008b4d9ae10000000a155369/content.htm&ei=C56BTqinCMTqrAfr5sycDg&sa=X&oi=translate&ct=result&resnum=1&ved=0CB8Q7gEwAA&prev=/search%3Fq%3Dhttp://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008
First check above one.
this is for understanding
http://sdnabape.blogspot.com/2010/11/step-by-step-configuration-for-running.html
Regards
Srinivas -
BRBACKUP terminated with errors
Hi,
When ever i am taking the back up it fails at the last step.Please find the error message.
BR0330I Starting and mounting database instance abc ...
BR0278E Command output of 'd:\oracle\abc\920\bin\SQLPLUS':
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Aug 8 19:50:45 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> ERROR:
ORA-12638: Credential retrieval failed
SQL>
SQL> ORA-12638: Credential retrieval failed
SQL>
BR0280I BRBACKUP time stamp: 2007-08-08 19.50.45
BR0279E Return code from 'd:\oracle\abc\920\bin\SQLPLUS': 0
BR0302E SQLPLUS call for database instance abc failed
BR0332E Start and mount of database instance abc failed
BR0280I BRBACKUP time stamp: 2007-08-08 19.50.45
BR0304I Starting and opening database instance abc ...
BR0278E Command output of 'd:\oracle\abc\920\bin\SQLPLUS':
SQL*Plus: Release 9.2.0.6.0 - Production on Wed Aug 8 19:50:45 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> ERROR:
ORA-12638: Credential retrieval failed
SQL>
SQL> ORA-12638: Credential retrieval failed
SQL>
BR0280I BRBACKUP time stamp: 2007-08-08 19.50.45
BR0279E Return code from 'd:\oracle\abc\920\bin\SQLPLUS': 0
BR0302E SQLPLUS call for database instance abc failed
BR0306E Start and open of database instance abc failed
BR0056I End of database backup: bdvwnksr.ffd 2007-08-08 19.50.45
BR0280I BRBACKUP time stamp: 2007-08-08 19.50.46
BR0054I BRBACKUP terminated with errors
Thanks in advance
Thanks
VenuHi Venu,
Looks like you have Windows system, please check and see if note 425828 ORA-12638 credential retrieval failed applies to you or not, and let me know the result after.
Thanks,
George -
BR0804I BRCONNECT terminated with error code 5
hi all,
we r exporting source system , at step 2 "Update database statistice" error occur
An error occurred while processing service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy > Oracle > Source System Export > Central System > Based on AS ABAP > Database Instance Export( Last error reported by the step :Process call 'G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method,precision,space,keep -p 4' exits with error code 5. For details see log file(s) brconnect.log.). You may now
choose Retry to repeat the current step.
choose View Log to get more information about the error.
stop the task and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/ERP/LM/COPY/ORA/EXP/CENTRAL/AS-ABAP/EXP.
BR0280I BRCONNECT thread 2: time stamp: 2010-03-17 13.32.29
BR0850I 69902 of 69902 objects processed - 82.467 of 82.467 units done
BR0204I Percentage done: 100.00%, estimated end time: 13:32
BR0001I **************************************************
BR0280I BRCONNECT time stamp: 2010-03-17 13.32.29
BR0848I Thread 2 finished with return code 0
BR0280I BRCONNECT time stamp: 2010-03-17 13.32.29
BR0879I Statistics checked for 0 tables
BR0878I Number of tables selected to collect statistics after check: 0
BR0880I Statistics collected for 69902/0 tables/indexes
BR0889I Structure validated for 0/83617/0 tables/indexes/clusters
BR0806I End of BRCONNECT processing: cecuoaya.sta 2010-03-17 13.32.29
BR0280I BRCONNECT time stamp: 2010-03-17 13.32.30
BR0804I BRCONNECT terminated with errors
ERROR 2010-03-17 13:32:30.171
CJSlibModule::writeError_impl()
CJS-30023 Process call 'G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method,precision,space,keep -p 4' exits with error code 5. For details see log file(s) brconnect.log.
ERROR 2010-03-17 13:32:30.187 [sixxcstepexecute.cpp:951]
FCO-00011 The step updateOracleStatistics with step key |NW_Export|ind|ind|ind|ind|0|0|NW_Export_Pre|ind|ind|ind|ind|3|0|NW_ORA_Statistics_Update|ind|ind|ind|ind|0|0|updateOracleStatistics was executed with status ERROR ( Last error reported by the step :Process call 'G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\brconnect.exe -u / -c -o summary -f stats -o SAPSR3 -t all -m +I -s P10 -f allsel,collect,method,precision,space,keep -p 4' exits with error code 5. For details see log file(s) brconnect.log.)
plz guidehi,
TST03, drop and recreate the index now export has failed 2 job outof 43,
export_monitor.java.log
Unloading of 'SAPAPPL0_4' export package: OK
Export Monitor jobs: running 1, waiting 30, completed 12, failed 0, total 43.
Export Monitor jobs: running 2, waiting 29, completed 12, failed 0, total 43.
Export Monitor jobs: running 3, waiting 28, completed 12, failed 0, total 43.
Unloading of 'SAPAPPL1_2' export package: ERROR
Export Monitor jobs: running 2, waiting 28, completed 12, failed 1, total 43.
Export Monitor jobs: running 3, waiting 27, completed 12, failed 1, total 43.
Unloading of 'SAPAPPL1_3' export package: ERROR
Export Monitor jobs: running 2, waiting 27, completed 12, failed 2, total 43.
Export Monitor jobs: running 3, waiting 26, completed 12, failed 2, total 43.
'SAPAPPL1_2.log
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job completed
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145456
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100319145456
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -e SAPAPPL1_2.cmd -datacodepage 4103 -l SAPAPPL1_2.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: Export without hintfile
(GSI) INFO: dbname = "PRD20090418030425 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "PRDSAP "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "PRDSAP"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x AMD64 Level 6 (Mod 23 Step 10)"
(GSI) INFO: instno = "0020500723"
EXP) TABLE: "K002" #20100319145654
(EXP) ERROR: DbSlExeRead failed
rc = 103, table "K9RPRD7000001"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145654
SAPAPPL1_3.log
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100319145655
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -ctf E I:\PRD_Exp\ABAP\DATA\SAPAPPL1_3.STR I:\PRD_Exp\ABAP\DB\DDLORA_LRG.TPL SAPAPPL1_3.TSK ORA -l SAPAPPL1_3.log
(RTF) ########## WARNING ###########
Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job completed
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145656
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20100319145656
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe -e SAPAPPL1_3.cmd -datacodepage 4103 -l SAPAPPL1_3.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: Export without hintfile
(GSI) INFO: dbname = "PRD20090418030425 "
(GSI) INFO: vname = "ORACLE "
(GSI) INFO: hostname = "PRDSAP "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "PRDSAP"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 1"
(GSI) INFO: machine = "8x AMD64 Level 6 (Mod 23 Step 10)"
(GSI) INFO: instno = "0020500723"
EXP) ERROR: DbSlExeRead failed
rc = 103, table "QCMZPORD_LINE"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
G:\usr\sap\PRD\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20100319145717 -
SID assignment terminated with errors
Folks
When I was trying to load data into ODS thru info package I got the following errors in the monitor, but I see all the records without any errors in PSA.
System error occured (RFC Call)
Task 0001 for parallel SID assignment terminated with errors
Activation of data records from ODS object ZTSODS terminated
Error getting SID for ODS object ZTSODS
Please suggest,
Thanks,
KumarThanks Sudheer and Prathibha,
I did the same in my previous load, Unchecked the BEx reporting flag, activated the ODS and did the full load but it failed with Process Overdue and with Short dump (Message_Type_x) runtime error.
When I right click on the ODS and selected Manage, I can see a green status for the load but when I see the contents I can only see the header got loaded (only the top row).
If I do this again, I may end up with the same error as I'm not doing anything difference from my previous load?. Pls advise.
Thanks,
Kumar
Message was edited by:
kumar K
Maybe you are looking for
-
Calendar - Year view??
My iPad had a superb calendar with a year view. Seems a shame iCal doesn't have this simple facility. Is there a way to get it, or a suitable (compatable) calendar that does?
-
Hi friends, I have imported the best practices package on my portal. created the queries in BW and assigned the roles user mapping etc all done. When I open the executive cockpit overview all I get is the standard adhoc query screen without any data.
-
Very low connection speed.
Hi, I've waited the 10 days since I first got BT Broadband and I wondered about the slow speed I am getting. The speed test says my line is rated for 8mbit (8000kbit) but I only get up to 900kbit connection speed, it was around 600-700kbit for a whil
-
Can purchase games but not in-app???
I am trying to purchase in-app and it is not working, i have spoken with apple 3 times now with no luck, very frustrating and they are telling me thigns i have already tried, i recently got a new phone even since then it has not worked, help anyone?
-
Extend a byte array dynamically
Is it possible to dynamically extend a byte[] by consecutively adding content to it, just like e.g. extending a String with the += operation:String myString = [[some String data here]]; myString += [[some more String data to be added to myString here