Terminating Database along with its Oracleservice (Win2008R2sp1)

My database terminated silently (nothing in logs) along with its Oracleservice everytime update run that performed via database link. When this update performed locally - nothing wrong happens.
Works flawless on test environment with the same software and hardware.
Here - EXPDP Terminating Database along with its Oracleservice (WIN 2003k ) - removing antivirus helped. But in my case no antivirus on the server. And a lot of memory and processors.
On client side error "ORA-03135: connection lost contact" appeared. I tried to run quiery via database link from diffrent servers, including other database on the same server.
Please, give any ideas.

Hi user;
Pelase see below notes which could be helpful for your issue:
ORA-03135 when connecting to Database [ID 404724.1]
OERR: ORA-3135 { Message text depends on version } [ID 38836.1]
Troubleshooting ORA - 3135 Connection Lost Contact [ID 787354.1]
Diagnosis of ORA-3135/ORA-3136 Connection Timeouts when the Fault is in the Database [ID 730066.1]
Regard
Helios

Similar Messages

  • My laptop died along with its harddrive, how can I sync my iphone to a new computer without losing everything?

    Hi, my laptop died along with its harddrive, finding it difficult to figure out how can I sync my iphone to a new computer without losing everything on my phone (iPhone 3GS).
    Any help appreciated
    Thanks
    C

    https://discussions.apple.com/docs/DOC-3141

  • How to duplicate a node along with its children in a JTree?

    Hello,
    Can anyone tell me how to duplicate/create a copy of a node
    along with its children?
    Code snippets will be appreciated.
    Thank you.

    It cant be done . You have to write a z pogram to update the data in the new dbtable.

  • Image on jsp from database along with other elements on image.

    Hi All,
    I wish to display an image which is stored in my database along with other contents on the page.
    I am able to display the image on an entirely new page but I do not wish to display it on a new page. Neither frames etc fit on my current page design.
    Kindly help

    I have a jsp page ..
    I have a byte stream in which i have stored the image from the database (the image is stored in databse as blob) in that jsp.When i use output stream object to display the image from the database (as suggested by many in this forum), the image is displayed in a new page. I wish to display the image along with my other elements like text etc in the same page.

  • How to download a module pool program along with its screens ,includes etc

    Hello Experts,
    How can I  download a module pool program along with its screens ,includes etc to my presentatio0n server and then upload it back when needed.
    When  I searched , I got a program which is satisfying my partial requirement because it only downloads
    the module pool program first(ie.just the main program)  and then the include needs to be downloaded to the system separately.Screen and statuses wont be downloaded.
    Is there a way to download all the objects for the corresponding program store in some format and then upload it back when required.
    Please Help.

    Hello,
    Go to the layout of the modulepool to be uploaded or downloaded. choose the menu path utilities->upload/download.
    The same file which is downloaded can be used to upload
    1.the screen flow logic and
    2.layout
    Using this you can upload as well as download
    Cheers,
    Vasanth

  • How to get string from jtextpane along with its attributes

    sir,
    How to get string from jtextpane along with its attributes
    i,e font,size,style,color etc.
    please help me out.
    my mail id is [email protected]

    JTextPane extends JTextComponent
    JTextComponent.getDocument()
    a Document is a set of Element, see Document.getRootElements(). Each Element has attributes, stored within an AttributSet object see Element.getAttributes()
    a Document can also be rendered as a String, see Document.getText( offest, length ), use it with 0 and Document.getLength() as parameters.

  • Migrate SQL 2008 Analysis database to 2012 AS database along with data level security defined in current production cube

    I want to migrate Analysis Services 2008 database to 2012 AS database along with data level security defined in current production cube
    Note: Only Production environment have security, while no security is defined in development environment
    Potential Approach:
    1 - Using Synchronization Wizard: Gives me error : "The OLAP element at line1 can not appear under envelope......" and this is because Synchrinzation works only for same version
    and in my case, there are different versions of SQL (SQL 2008 and 2012)
    2 - Using Visual studio conversion wizard - Convert SQL 2008 AS project to 2012 and then process cube, so I can get the cube working but then how can I get data level security since 100's of data level security is defined in production Cube, so how can I
    migrate that across
    3 - Script out XMLA and deploy cube - But then again having issues with how can i script SSAS security
    4 - Would taking backup of SSAS 2008 database and restore to SSAS 2012 will help ?
    Any suggestions would be appreciated
    Thanks,
    Mihir

    Hi Mihir,
    According to your description, you want to migrate the SQL Server Analysis Services (SSAS) 2008 database which have some security setting with it to SSAS 2012, right? We can migrate existing Analysis Services databases either during Setup, by upgrading an
    existing instance of Analysis Services, or after Setup, by running the Migration Wizard. Generally, when migrating a database to another server, all the setting will be migrated. So in your scenario, you can refer to the steps on the links below to migrate
    your SSAS database.
    How to: Migrate Analysis Services Databases
    Migrating Existing Analysis Services Databases
    Regards,
    Charlie Liao
    TechNet Community Support

  • Bookmark Extraction along with its action either a Page No or named destination

    I want to extract all the bookmark from a PDF file along with its action either a page no or named destination.
    I am developing application using VB.net. Is it possible using JSO? If yes then how?

    I found a solution for it.. with Javascript (JSO) only...
    With JSO I was able to find all bookmarks then to find page no of each bookmark I used EXECUTE() method of JSO Bookmark.
    On execute() cursor moved to bookmarked page the using JSO.Pagenum I was able to find page number.
    This way I was able to extract all Bookmark with Page No..
    Thanks to All...

  • Move documents along with its version through workflow

    hi
    suggest which of the 2 ways is possible through Designer workflow,
    1)can i move a document along with its version to another library where same settings are enabled.
    2)can i move a document from a library and add as a new version to another item present in another library.
    Thanks 

    Hi Krishna,
    When you move a document to another library by a SharePoint Designer Workflow, the version history is
    not maintained. This behavior is by design, because the version history of a document is relative
    to its original document library. The moved document is considered as a new document in
    the destination library.
    The only solution is to move the documents via Windows Explorer or through Manage Content & Structure.
    Open the two document libraries in Windows Explorer and move your files from source to destination or move your files through Manage Content & Structure.
    The Manage Content & Structure feature is only available in Enterprise edition.
    NOTE: The version will be maintained if you MOVE the files. If the files are COPIED
    it will not maintain the version.
    Please remember to click 'Mark as Answer' if the reply answers your query or 'Upvote' if it helps you.

  • My phone will not turn on along with its mophie case, which I believe is due to water damage. When it did resppnd, it cited error 1608. Is there a way around this

    My phone will not turn on along with its mophie case, which I believe is due to water damage. When it did resppnd, it cited error 1608. Is there a way around this?
    Thanks,
    Raphael Minot

    A way around what? 

  • How to get terminal address along with Change document header

    Dear All
    My client want a report of the frequencies of a sales document changes along with terminal address. In table CDHDR i can get user name, date, t-code but not the terminal address. So requesting to guide me of how to get the terminal address from which terminal the document has been updated.
    Appropriate answer will be rewarded.
    Regards
    Kingshuk
    Edited by: Kings_Roy on May 31, 2010 11:02 AM

    I don't think this information is kept in change documents.  So for the change documents that are already created, you cannot get this information.
    For future however you can do some code changes to get this information.
    Function module TH_USER_INFO can return terminal name as well as IP address for a given client and user.
    All you have to do is either store this additional information along with change documents. For this i think you can check the FMs that are writing SD change documents. 
    OR
    You can use user exit exit SUSR0001 (User exit after logon to SAP System) to call this Function (TH_USER_INFO) at user logon and store this info in a Z table. Later when you are reading change documents, you can get user name, date time from change document and search this Z table for respective user Terminal name and IP Address.
    This is not a complete solution but i hope it will direct you to a solution.
    cheers.

  • Fnd_load to download/upload concurrent program along with its schedule also

    Is there any fnd_load command which can download all the scheduled programs along with there parameters, program name and its schedule.

    user10699723 wrote:
    Is there any fnd_load command which can download all the scheduled programs along with there parameters, program name and its schedule.https://forums.oracle.com/forums/search.jspa?threadID=&q=FNDLOAD+AND+afcpprog.lct&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=FNDLOAD+AND+Concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How to add a second database along with existing two node RAC environment

    Hi,
    I was wondering if anyone can help me with this.
    My Environment:
    1. Two node RAC Cluster database (11.2.0.2) with ASM running perfectly (Oracle Sid = test-1)
    2. I have installed a second single instance db on node 2 (Oracle Sid = test-2) with NTFS file system for datafiles
    3. Database is up and running, but I am not able to connect it from any client.
    4. I am getting ORA-12514:  TNS:listener does not currently know of service requested in connect descriptor
    5. Database (test2) is registered with grid LISTENER
    5. TNSPING from client machine response is ok
    Am I missing something here, happy to provide more info if requested.
    Thanks,
    PS

    C:\Users\root.test_prod>lsnrctl
    LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 23-FEB-2012 11:58:05
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Welcome to LSNRCTL, type "help" for information.
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
    Start Date 18-FEB-2012 19:51:47
    Uptime 4 days 16 hr. 6 min. 24 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\app\11.2.0\grid\network\admin\listener.ora
    Listener Log File C:\app\11.2.0\grid\log\diag\tnslsnr\IRIS11G-DB-2\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENERipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.202)(PORT=1520)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.215)(PORT=1520)))
    Services Summary...
    Service "+ASM" has 1 instance(s).
    Instance "+asm2", status READY, has 1 handler(s) for this service...
    Service "test-11gRAC.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Service "irisapps.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Service "test-2" has 1 instance(s).
    Instance "test-2", status READY, has 1 handler(s) for this service...
    Service "test-2XDB" has 1 instance(s).
    Instance "test-2", status READY, has 1 handler(s) for this service...
    The command completed successfully
    LSNRCTL> service
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
    Services Summary...
    Service "+ASM" has 1 instance(s).
    Instance "+asm2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:1322 refused:0 state:ready
    LOCAL SERVER
    Service "test-11gRAC.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:1829 refused:0 state:ready
    LOCAL SERVER
    Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1022 state:ready
    DISPATCHER <machine: IRIS11G-DB-2, pid: 4496>
    (ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=57695))
    Service "irisapps.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:1829 refused:0 state:ready
    LOCAL SERVER
    Service "test-2" has 1 instance(s).
    Instance "test-2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    Service "test-2XDB" has 1 instance(s).
    Instance "test-2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1022 state:ready
    DISPATCHER <machine: IRIS11G-DB-2, pid: 9340>
    (ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=58653))
    The command completed successfully
    LSNRCTL>

  • Report on POs along with its PR item reference

    Dear All
    Is there any Report on POs which provides the details of Referred PR items also
    Thanks

    Dear Antony
    Is there any report in standard which provides me the list of POs created with reference to a PR number.
    Input is PR number
    Thanks

  • I want to determine the perfect values for the motor ... along with its pid values

    I'm ne to labview and this is my second program.... i designed a motor which maintains constan speed with varying load..... the problem is i dont know the real values of any motor. . .  and as the inertia across the load decreases the speed oscillates a lot . . . and i'm even not happy with the current(I(A)) readings ... they dont follow the motor characteristics i think . . .  can someone please point out the mistakes and clarify them for me ... 
    thanks in advance
    Attachments:
    Motor1_4.vi ‏304 KB
    Control 10.ctl ‏6 KB

    Hi Rahul,
    Please find below the require info:
    4.6 B                                   ECC 6.0
    'POPUP_TO_CONFIRM_STEP'               POPUP_TO_CONFIRM
    'TABLE_COMPRESS'                    Not obsolete
    'TABLE_DECOMPRESS'                    Not obsolete
    'WS_QUERY'
    'WS_UPLOAD'                         GUI_UPLOAD”
    'DISPLAY_BASIC_LIST'                    Not obsolete
    'POPUP_TO_DECIDE'                    POPUP_TO_CONFIRM
    'CLPB_EXPORT'                         Use class CL_GUI_FRONTEND_SERVICES
    'HELP_VALUES_GET_WITH_TABLE'          F4IF_INT_TABLE_VALUE_REQUEST
    'DISPLAY_GRID_LIST'
    'WS_DOWNLOAD'                    GUI_DOWNLOAD
    'POPUP_TO_GET_VALUE'               Not Obsolete
    'POPUP_TO_GET_DATE'     
    'DOWNLOAD'                    “GUI_DOWNLOAD”
    'WS_FILENAME_GET'                    KD_GET_FILENAME_ON_F4
    'READ_EXCHANGE_RATE_N'
    'CONVERT_DATE_INPUT'               Not Obsolete
    'DB_COMMIT'                    Nott Obsolete
    'WS_EXCEL'                         WS_DOWNLOAD and then execute WS_EXECUTE
    'STRING_SPLIT'
    'HELP_VALUES_GET'               F4IF_FIELD_VALUE_REQUEST
    'CHECK_IBAN_ACTIVE'
    'POPUP_TO_CONFIRM_WITH_MESSAGE'          POPUP_TO_CONFIRM.
    'POPUP_TO_CONFIRM_LOSS_OF_DATA'          POPUP_TO_CONFIRM
    'SYSTEM_GET_UNIQUE_ID'                    SYSTEM_UUID_C_CREATE
    'TR_RELEASE_COMM'
    'GRAPH_DIALOG'
    'CONVERT_TO_LOCAL_CURRENCY_N'
    'WS_FILE_DELETE'                              GUI_DELETE_FILE
    'WWW_GET_MIME_OBJECT'
    'GET_FIELDTAB'
    'HELP_VALUES_GET_NO_DD_NAME'          F4IF_INT_TABLE_VALUE_REQUEST
    'FI_DOCUMENT_ARCH_READ_SINGLE'
    Thanks
    Piyush
    Reward point, if helpfull.

Maybe you are looking for

  • Canon PowerShot SX280 HS disconnects while transferring photos

    I have a Canon PowerShot SX280 HS. I can connect it to wifi. It finds my iPhone and works well with the app. It finds my iMac and it connects: software starts, transfer of images starts, but then the camera is disconnected suddenly, message: "The cam

  • Text variable for Fiscal year/period

    Hi gurus, We are on BI 7.0 (PL 15). In G/L i am using the standard 0FISCPER text variable 0T_FPERF in the columns, which should e.g. produce the text "04.2008". However instead it displays "4  .0800". Adding Fiscal year/period 0FISCPER to drilldown s

  • Directory browsing in dialog selection

    Hi all. I need a directory browsing in dialog module. Meaning creating the field using screen painter. Any code for creating the directory? thks

  • Flattening adjustment layers prior to converting modes

    Hi all, I have a document with a load of layers and scattered throughout are adjustment layers. I need to get the document from RGB  to CMYK. Is there an easy way to have the adjustment layers applied to all the underlying layers so I can convert wit

  • Good book for Oracle Marketting

    Dear All, Could you please suggest me a good book or link from where i can learn oracle Marketting. Regards Rajat