Termination does not appear as fail sequence
Hi,
I have I a subsequence than include some Action type step. The step set a local variable. Based on that variable I decide whether to continue or to terminate.
In the event of termination, the process is indeed terminated, but when I look at the report generated by TestStand, the subsequence have a Pass mark.
Is this normal? I would have expected to see Fail or Termination.... How do I fixe this problem to show a fail sequence?
Thanks
Rafi
Hi, Ray
Thanks for your tests. I have also tried with PostAction now. But the result is still the same.
How have you done this ?
By the way as Dug said in TS 4.0.1 it is fixed.
What do you think about updating to the newest version ?
I am concernd when i received a letter from NI about latest DAQmx problem
(infocode rda4a4) and this affects TS 4.0.1 and CVI 8.5
Greetings
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Attachments:
test2.seq 7 KB
Similar Messages
-
Weblogic 7.0 SP1 JDBC Multipooling does not appear to fail over consistantly
We are running Weblogic Platform 7.0 SP1 on a Sun with Solaris 8 O/S
We have a connection multipool set up associated with a Data Source.
The multipool has two connection pools, each pointing to a seperate but
Identical database. The multipool is created with the high availability algorithm
set.
both connection pools have the following settings:
(Connections Tab) (Testing Tab)
Initial Capacity:0 Test Table Name: dual
Maximum Capacity: 20 Test Reserved Connections: Checked
Capacity Increment: 2
Login Delay Seconds: 2
Refresh Period: 15
Allow Shrinking: Checked
Shrink Period: 15
When the first database goes down for a backup, We can see the exceptions thrown
from the
broken acitve connections, which would be expected. But we also notice a significant
response time increase (3-7 seconds) and we notice continuing exceptions from
what appears to be the application EJB still attempting to connect to the first
instance. It is only when a DISABLE_POOL is issued using the command line interface
to disable the first pool in the multipool that the response time drops to normal
and the exceptions stop. The exceptions don't happen for every query, but we cannot
understand why the test-on-reserve doesn't seem to always work.
Any help would be appreciatedThis is known behavior of the "high availability" algorithm for multipools.
Whenever a multipool is asked for a connection, it will always try the first pool first
(unless it has been diabled). The algorithm doesn't remember that it had trouble with
the first pool and start with the second pool (e.g., put the first pool at the end of the circular list
of pools to be tried). This is the way it was designed (in my opinion, this defies the
principal of least astonishment, but not everyone agrees with me).
We are planning to add a new algorithm in the next release that does keep state.
The way it currently works, it depends on how long it takes to figure out that
the first pool is not available. This depends on the database client driver and
the network connection (it could take from 100ms to multiple seconds to minutes
to figure it out).
"Joe Doyle" <[email protected]> wrote in message news:[email protected]...
>
We are running Weblogic Platform 7.0 SP1 on a Sun with Solaris 8 O/S
We have a connection multipool set up associated with a Data Source.
The multipool has two connection pools, each pointing to a seperate but
Identical database. The multipool is created with the high availability algorithm
set.
both connection pools have the following settings:
(Connections Tab) (Testing Tab)
Initial Capacity:0 Test Table Name: dual
Maximum Capacity: 20 Test Reserved Connections: Checked
Capacity Increment: 2
Login Delay Seconds: 2
Refresh Period: 15
Allow Shrinking: Checked
Shrink Period: 15
When the first database goes down for a backup, We can see the exceptions thrown
from the
broken acitve connections, which would be expected. But we also notice a significant
response time increase (3-7 seconds) and we notice continuing exceptions from
what appears to be the application EJB still attempting to connect to the first
instance. It is only when a DISABLE_POOL is issued using the command line interface
to disable the first pool in the multipool that the response time drops to normal
and the exceptions stop. The exceptions don't happen for every query, but we cannot
understand why the test-on-reserve doesn't seem to always work.
Any help would be appreciated -
My ipod touch has a permanent image of the end of a USB cable with an arrow pointing to an icon of ITunes. I can't reset using the two button method, and ipod does not appear on itunes when I plug it into the computer - and nothing else happens either. This happened after I agreed to a software update which failed. How can I get it going again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my iphone 4s was continually searching for a newtwork my carrier informed me my iphone needed a service or exchange. i drove 2hrs and paid $239 to exchange my iphone. i then went to activate it and i recieve a message saying activation failed. the SIM card inserted in this iphone does not appear to be supported. contact apple for support. i rang apple and they informed me its my sim or the carrier. i rang the carrier and they said its apple. i have also tried activating the phone by using another carriers sim and the same carriers sim from another persons working phone. still get the same message.
Dude,
Apple didn't lock the phone, and you'll be waiting until kingdom come of you think that Apple will unlock it.
Only the carrier to which a phone is locked can authorize the unlocking. -
ipod restore failed can see on the screen is the cable connection symbom and the ipod does not appear in the LH panel of itunes is there an easy solution to this
To get iTunes to see your iPod try:
- Placing the iPod in recovery mode. See:
iPhone and iPod touch: Unable to update or restore
- Placing it in recovery DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Sometimes this program will get th iPod in recovery mode:
RecBoot iPod-1.0.2-Mac-Jaxov.zip - File Shared from Box.net - Free Online File Storage -
various web sites stated that I needed to update adobe flash player. I clicked on link and followed instructions, then received the message "installation encountered errors - failed to initialize". So far, I have uninstalled previous versions of flash player and checked my plug ins. Noticed that Shockwave flash does not appear in my plug in list and adobe states that this needs to be active for their flash player.
I am on Windows XP and Firefox version 8.
Thanks.
Cameron CassidyYour above posted list of installed plugins doesn't show the Flash plugin for Firefox.
See:
* https://support.mozilla.com/kb/Managing+the+Flash+plugin
* https://support.mozilla.com/kb/Installing+the+Flash+plugin
You can get the Adobe Flash Player here:
* http://www.adobe.com/downloads/
* http://www.adobe.com/go/getflashplayer
Or download the Flash Player via this page: Troubleshoot Flash Player installation for Windows
*http://kb2.adobe.com/cps/191/tn_19166.html#main_Download_and_install_the_latest_Flash_Player_version
# Download and save the Flash installer for the Firefox browser to your desktop.
# Exit Firefox (File > Exit), you may need to verify that in the Task Manager (XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC, Processes tab)
# Start the Flash installer with a double-click on the desktop icon of the Flash installer.
* You may have to run the Flash installer as Administrator (right-click: Run as ...) to get access rights for installing the files and modifying the registry. -
I have internet connection but myh incoming email does not appear. When I try to access new emails it says, "connection to server has failed". Help
What did your email provider say about it when you contacted them?
-
Presenter 9 installation failed - can't uninstall v.8, does not appear in control panel
I am trying to install Presenter 9, but I am getting an error that says "A conflicting or prerelease version of Adobe Presenter 9.0 exists on this computer. The conflicting version must be removed before installing from the current media.". From what I have read on the forums, I am interpreting this to mean I should uninstall Presenter 8 first. According to the instructions, I should be able to remove it using the Programs and Features control panel, but Presenter does not appear there (if I open PPT it is still there, so I know v.8 is still installed). I have tried using the AdobeCreativeCloudCleanerTool but Presenter does not appear as an option for removal. Can you please tell me how I can uninstall Presenter 8 so I can install Presenter 9? I am using PPT 2010 32 bit and trying to install Presenter 9 32 bit. Thanks.
Yes, I Presenter 7 was installed before Presenter 8. I have Windows 7.
I found my old thread here: http://forums.adobe.com/message/5080369
I followed that. Here is what I have done:
I ran the reg file from http://blogs.adobe.com/captivate/2012/08/resolution-adobe-presenter-8-installer-issue.html
I deleted all the folders and files related to Presenter 7 or 8 in
C Drive> Users > Your User Name>App Data > Local > Adobe >
and App Data > Roaming > Adobe >
I reinstalled everything.
So far so good. -
My iphone 5 does not appear to be remembering my home wifi network and connect to it automatically. I have to reconnect manually each time. My other iphone (4s w/iOS6) has no such problems. Any suggestions?
It's not a bug in iOS 6, and it won't be fixed. It's usually caused by your phone having been paired to 2 different networks with the same SSID. So it needs to ask which one you meant. Occasionally be corrupt data in the network settings, which is why Allan suggested Forget This Network.
-
I do I eject a blank CD stuck in my iMac 10.7.5? The CD does not appear on my desktop. Why not?
How do I do I eject a blank CD stuck in my iMa 10.7.5? Also, the CD does not appear on my desktop. Why not?
Here are some ways to eject it, hope this helps.
Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the
left mouse button or track pad until the disc ejects.
2. Press the Eject button on your keyboard at power up.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this: Open the Terminal application in
your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject
If this fails then try this:
Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.
By Kappy -
IPod Nano does not appear in iTunes or My Computer
I have had my Nano for around a year with no problems but since I installed iTunes 7x, my computer has had issues with synchronising my iPod. At first it was that the iPod would appear in Windows explorer but not iTunes. Now it does not appear in either, I simply get the red flashing "Do not disconnect" sign on my iPod screen and nothing happens in windows or iTunes.
I have followed every instruction this site has thus far given me and found one set of instructions that looked promising - http://docs.info.apple.com/article.html?artnum=304434 - however once i reached the crutial stage of actually switching the 'terminal services' from disabled to manual, I get an error message on my computer "Error 5: Access denied" and nothing on the site gives any indication of what to do in such an eventuality.
Can someone please let me know if there is another way of getting this thing to synch or perhaps some way of making the computer grant me access to this elusive "terminal services" file??
Anything would be greatly appreciated
Thanks! Adam- however once i reached the crutial stage of
actually switching the 'terminal services' from
disabled to manual, I get an error message on my
computer "Error 5: Access denied" and nothing on the
site gives any indication of what to do in such an
eventuality.
Do you have an administrator account on your computer? If you are not logged in as administrator, do so before attempting to change the to manual. However, I myself am having the same problems with my own ipod.. -
I have been using Firefox on my Desktop PC with Windows XP for a long time. However, today possibly due to some virus (I attached an infected flash drive to my PC) a suspicious change in homepage (www.delta-homes.com) of my firefox occurred. Simultaneously an error message of "WinZip" appeared on screen. I figured that there must be some software in "C:\Program Files\" which is also causing problem to my firefox. I opened Program Files and removed that folder named WinZip. (Tried to uninstall it but it won't happen so I had to use "Unlocker" to kill processes this folder was associated with and then deleted the folder.)
From that point onward, My FireFox started to behave weird. Whenever I click on Firefox icon or access firefox.exe from any source (start menu, quick launch, program files, Run Command), it starts but appears only in "Task Manager Processes Tab". In that Processes Tab, firefox.exe is continuously using 50% of CPU but it does not appear on Desktop at all.
To go a step further, I uninstalled firefox and tried to re-download from Firefox official website but the download fails in the start saying "Download is interrupted". (See attached Image). So I downloaded a previous version of Firefox (v 34.0) from www.filehippo.com and installed it but the same problem is happening with this version too.
I am confused and surprised what might be causing this problem. Everything else on PC running fine. Kindly help me restore my Firefox so that I may not lose any precious Bookmarks, Settings and other Data. thanksStart your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/viruses/disinfection/5350 Anti-Rootkit Utility - TDSSKiller]
* [http://general-changelog-team.fr/en/downloads/viewdownload/20-outils-de-xplode/2-adwcleaner AdwCleaner] (for more info, see this [http://www.bleepingcomputer.com/download/adwcleaner/ alternate AdwCleaner download page])
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us! -
This file does not appear to be a Photoshop file - Menu won't import
I was searching on the forums and found that some other people have had this problem, but I didn't see any solutions.
When I try to build my DVD from Encore, I get this error "This fiel does not appear to be a Photoshop file.
I created my menu in Photoshop CS4, imported it as a menu. When I preview in Encore it works fine?
The photoshop file is 8 bit color...should it be 16? I tried that to, but it doesn't seem to change anything?
Any help is greatly appreciated!!!The 2 bit image object that shows up to the right of the buttons on the highlighted state still was a little too crisp, but
I'm going to try a little vertical blur like you said to see what happens.
Well, the Vertical Blur will not work there. The Sub-picture Highlights cannot have any Styles, or Filters added to them. What I do to "simulate" a "glow" is to to create a second Sub-picture Highligh, in the next Layer down (in the same Button Layer Set)t, ever so slightly larger. I then set it's Transparency in Encore to be about 50%-30% of what the "original" Sub-picture Highlight's Transparency was. You can also assign another number from the Menu Color Set (this is done in PS), and then adjust that number's value in Encore to be a shade lighter of the original Sub-picture Highlight's. You will end up with maybe a 2 and a 3, and need to pick those colors from a Custom Color Set in Encore - cannot be done in PS, at least through CS3 and I do not believe in CS4 either. That might bear checking out, with someone like Jeff Bellune, or Jbowden. See this LINK for some tips, and this one for the full ARTICLE. The link to the version posted on Adobe has been lost, with the changeover in the forum. You can post and read at Muvipix.com, without a subscription, or even the free signup. Because of the wealth of Functional Content, stock music and Menus, etc., you might want to spend a bit of time poking around there.
Though most of the article and discussion revolve around removing part of the Sub-picture Highlight, the final steps are for adding what appears to be a Blur. Remember, you only have ON, OFF, COLOR (limited to 4, including the background) and TRANSPARENCY, for each pixel in a Sub-picture Highlight. That's why you cannot have Styles, or similar. You have to create the illusion.
Also, I created my lower third in Photoshop and saved out a .PNG file to import into Premiere.
When I play the DVD, there seems to be some noise in the title. Do you think that's because of how
I saved the video out or because I used a .PNG?
I do not know. I have never used the PNG format. Instead, I create all of my Titles (the ones that I do outside of Titler) in PS, often using AI for shapes, that will be Rasterized in the process. I do my Titles there, and then Save_As .PSD. If I wish to animate some of the Layers, I'll Import as a Sequence, if not, I Import as Footage. I always start from the image Preset to match my Project, so frame size and PAR are right to begin with. The only reason that I can think of for using PNG is the Transparency, but PSD offers that, and so much more.
There is much that one can do with the animation of PSD Layers in PrPro. It's not as powerful, or as full-featured, as is AE, but many are surprised at how good it is.
Best news is that you are almost there, and that things looked good on the DVD. If you have any trouble following the steps for the simulated Glow in the second Sub-picture Highlight, just let me know. It's been a whle, since I wrote that, and might need to re-visit it myself.
Good luck,
Hunt -
I accidentally entered full screen view and was unable to exit. The Firefox Help article at https://support.mozilla.org/en-US/kb/how-make-firefox-and-websites-go-full-screen?esab=a&s=full+screen+mac&r=0&as=s says I should see a Full Screen View icon in the upper right-hand corner of the Firefox window. That icon not there. I cannot find it. It does not appear in either the full screen or non-full screen views.
Further, the Help article's advice to exit full screen view by using the keyboard sequence command+shift+F does not work. I had to unplug my iMac and reboot. Firefox then opened in non-full screen view.
Ideally, hitting the Escape key would cause Firefox to exit full screen view.I forgot one detail. This happened while I was having trouble seeing the mouse cursor (I use Apple's Magic Mouse). It had disappeared briefly. I had to drag the cursor out of the Firefox Window for it to reappear. I accidentally entered full screen view while the cursor was not visible.
-
When an image is inserted here using clipboard, it appears in the editor, but it does not appear in
when an image is inserted here in forum po editor using clipboard, it appears in the editor, but it does not appear in the post. When the image is inserted from a file, it works
Im not completely sure, why you are pointing out the very same thing I'm pointing out too. If you re-read my original post thoroughly, you will find - at its very end - the sentence "When the image is inserted from a file, it works". Since I'm not aware of the way how to insert the image from a file in a procedure other, then clicking the "camera" icon, I hold such a sentence for more then enough to point out, that the camera icon works fine for me (if you re-read my post thoroughly and pay detailed attention of my expression "using clipboard", then you shall definitely evaluate this expression as covering both ways an image can reach the cliboard, eg. Copying from a graphical editor/processor or dragging&dropping a graphical file).
However more then this, your post does in fact NOT reply to the fact, why the WYSIWYG editor box allows the insertion of an image from clipboard, but then fails to upload it and thus it is not displayed in the post.
For the sake of completness, I must also point out, that your last sentence of your post "And that's what it is there for" does not bring much clarity about that thing - while I fully understand, as one can observe from my "When the image...it works" sentence, the functionality, purpose and propper handling of the "camera" icon, I cannot agree with such a behaviour of the editor, that allows an operation to be done (What You See) that does not affect the outcoming result (Is What You Get).
From the theory of designing (G)UIs one may learn, that in such a case the operation should either fulfill completly (eg. display the clipboard-inserted image in the resulting post) or fail completly in the beginning (when Pasting the image into the text), either silently (just not displaying the image in the editor field) or with an error warning such as "Insertion of images/bitmaps from clipboard is not permitted". For Windows-like environments (such as, but not limited to, Microsoft Explorer, KDE, Gnome, IceWm....) the change of the dragging cursor to display a kind of "No way" or "no entry" pictogram, is also advisable.
For the sake of completness of my reaction I also might percieve your last sentence as a kind of irony or sarcasm, which however I definitely do not find appropriate behaviour, more over I might call it an "arogant rudeness" in case of such a "VIP" member with more then 9000 posts in the time when this post is being written, with a hint of overworking, malicous intends, inattention, ego-centricism or any other personal failure(s) or a combination of them, that you should - in case they are present - definitely pay attention to in your private life.
Moreover, let me please point out, that Im not much pleased about the way this forum works with its users, since I find the bug I have discovered, only a small one (a category B one might say in the A-B-C scheme, eg. a category, that does not directly influence or prohibit the execution of the main business cases, however it may result in discomfort, data loss or operation repetition, such a category would be most possibly a category C in the A-B-C-D scheme). Therefore I must explicitly express my annoyance that you have the guts to handle the post I did like this, when - in my opinion - the post has been written in such a manner that it was merly a polite point out of a small bug, thus it was kept as brief as possible, but fully covering the description of the scenario, alternate scenarios and their outcomes. Moreover, I'm definitely displeased, that you allow yourself to post such a post, that - instead of exploring the matter - throws the whole matter on the head and inside-out, or, one may say, kicks the bucket, and forces the original author, in this case me, for re-accounting for himself, moreover the ambivalency of your post opens such many possibilities to account for, that the time and resources the self-accounting autor has to spent, heavily overweighting the importance, significance and impact of the bug itslef.
So let me please advise you for the next time:
- to explore posts with more thoroughness, evaluating their expressions and sentences much more deeply, rather then just glance through on their surface
- think twice before answering and try to figure out how such answer might be percieved
- try to do less posts, but with higher quality
- try to employ more politeness and correct behaviour
- approach the matter with more humble and curious attitude rather then with a "I-know-everyting-better" standpoint
With regards
Lukas Plachy
Misstypes corrected by rheingold.
Maybe you are looking for
-
Fonts on Websites are not displaying correctly
I am using FF 16.0.2 with all the default settings. When I go to certain websites, it displays with non-readable characters, almost like it isn't recognizing the page encoding. I checked and my encoding settings are set to Unicode (UTF-8). Screenshot
-
SAP BI 7.3 Analysis authorization transport log
Hi, We have transported a Analysis authorization to production system, I would like to know the exact changes moved through this transport carrying a particular analysis authorization. The issue here is RSECVAL_CL has not recorded the changes done
-
Extracting similar data from a dynamic set of tables
I want to select common fields from an arbitrary set of tables, adding an extra field that is the table name, and return all of these rows in a single table. I know the steps but I am getting bogged down in the details (being new to Oracle): --Create
-
Safari Just Stopped Working for No Apparent Reason -- What's Up?!
Hi there I'm new to this group, and I really hope someone can help... For no known reason, the other day my Safari browser started to load VERY slowly and then eventually it quit. Apart from temporary trouble with broadband service, nothing has chang
-
Sample code on how to populate data in DropDownListbox
Hi all i am new to the webdynpro for java. i have one UI element called DropDownListBox and i want to populate some desired values to the dropdown list box. what are the different ways are there to populate data in DropDownList box. for example i hav