Termination error during Offcycle payroll run
Hi All,
Please help me with this error:
when I do off cycle payroll run for one of employees I am getting the following error.
Termination in operation ERROR
00000010
UNE1********* < ERROR # =NEG YTD IN= TCRT NOT =ALLOWED =
Basic entry in IT :
Thanks in advance
Gopi
Hi,
Even Net check amount is coming zero ,You have to adjust some amount(by changing sign as negative or positve) within that IT 221 .
Make sure while adjusting amount Net check Amount should be ZERO only.
When you run payroll in payroll log you will able to find for which WT system is giving error.
That WT must have -ve value in TCRT tabel.
Match this amount with all the WT you have maintain in IT 221 .
Once you get the WT which have the same amount ,change its sign and try to run offcycle .
Thanks,
Pradeep.
Similar Messages
-
Error during scheduling while running Run order sequencing in PPR
Hello Experts,
An error saying 'Error during scheduling' is logged while running Run order sequencing in Production Planning Run and the job is failed.
Checked the capacity of the resource but seems ok.
The below long text is displayed next to the error message.
Error during scheduling
Message no. /SAPAPO/OM043
Diagnosis
The system could not schedule an order, operation or activity.
This could have the following causes:
The resource does not have any free working time or capacity.
If you have set planning direction backwards in the strategy profile:
There is not enough working time or capacity available for scheduling between now and the scheduling date.
If you have set planning direction forwards in the strategy profile:
There is not enough working time or capacity available for scheduling between the scheduling date and the end of the planning area.
If you plan characteristics-dependently:
You have assigned characteristics to operations of the order that do not agree with characteristics of the resources on which the operations are to be processed.
The system cannot find any suitable characteristics on the resources and so it cannot schedule.
Procedure
Depending on which of the above reasons is the cause, change the following settings:
Change the working times and capacities of the resources.
Set the planning mode "infinite planning" in the strategy profile.
Activate the planning direction forwards or backwards and reverse in the strategy profile.
Change the characteristics that you have assigned to the resource.
Can anyone let me know what else need to check to avoid the error.Dear Maddy,
The function "Reschedule" follows an all-or-nothing logic, which means that either all selected activities on a resource can be re-scheduled or the function (better the liveCache) cancels and no activities will be re-scheduled.
One reason might be that you have a pegging relation to a fixed activity (this might be a sales order, forecast, an activity outside the propagation range...) which cannot be considered during the
scheduling. The liveCache cannot break the pegging, therefore it cancels the scheduling.
Please have a look at the note 510669 which offers a heuristic on the basis of the algorithm /SAPAPO/HEUR_PLAN_SEQ_PACKAGES. This heuristic should solve your problem. It will re-schedule as many activities as possible and will not cancel if one fails.
Depending on your current release there could be also some correction notes like
1272960
1027194
I hope I could help you further.
Regards,
Tibor -
Hi,
During stage audit run in transaction PIQ_AUD_MP_CP, the error " requirement status profile has the status incomplete, check the profile".
I have maintained requirement pattern, the requirement selection for abstract requirements and assigned the pattern to the catalog.
Assessment exist for the program of study to do the stage audit and the assessment process is opened as well.
Regards,
Sravan Kumar VHi,
Thanks! i got a solution
Regards,
Sravan Kumar V
Edited by: Sravan on Feb 9, 2009 12:19 PM -
UTF-8 Encoding errors during nightly batch runs
My boss recently tasked me with researching (and hopefully resolving) why our XML frequently has UTF-8 encoding errors.
I've been in the IS world for less than a year now so please bear with me when it comes to terms, data flow, etc.
Overview:
Our Oracle DB spits out XML for the nightly batch runs into a file location, lets say C:\xPression\CustomerData\Certificate.xml. The XML is in Courier New font but some characters make their way into the XML but arent supported. The big one is the elongated ' - ' character. Just one instance of this and the entire XML fails.
When the batch job is run sometimes there are encoding errors (¿, ¡, -, etc) and every morning I have to come in, finding the invalid character, fix it and have the job re-run.
I want to know if there's a way so that the XML that comes out is always in the Courier New font, or is there a way to convert it.I want to know if there's a way so that the XML that comes out is always in the Courier New font, or is there a way to convert it.
First thing first, an XML file is a text file, it doesn't have a "font" but an encoding.
The font is the graphical representation of characters and it is related to whatever client tool you're using to view the content, not to the content itself.
That being said, a lot of fonts do not support the full range of unicode characters so you may get replacement characters in some case.
We're missing some information to provide an answer :
- what's the database version?
- what's the character set of the database?
- how are you generating and writing the XML to the file ? UTL_FILE, dbms_xslprocessor, dbms_xmldom?
If the file is generated using UTF-8 encoding then the issue might just be that you're not using an UTF-8-enable editor. -
hi
when im doing the fi posting it generate incorrect document with error
Field Bus. Area is a required field for G/L account DMRC 240001
Message no. F5808
Diagnosis
The value for field "Bus. Area" in the interface to Financial Accounting is an initial value but you are required to make an entry in the field selection for G/L account "240001" in company code "DMRC" linked to the field selection for posting key "31".
System Response
Error
Procedure
It might be an error in the configuration of the G/L account field selection. The initial application, used to call up the interface must otherwise define a value for field "Bus. Area". If this is the case, contact the consultant responsible for the application used to call up the interface or get in contact with SAP directly.
is there any solution?
nutanHi,
This is FI, GL creation problem.
It may be, While creating the GL they have done wrongly.
Thanks and Regards,
Revathi. -
What is a best practice for counting number of payments in Payroll Run?
I'm trying to get a feel for what people are using as a means for counting number of payments being created during a payroll run. I would like to get a total number of checks, direct deposits, wires and zero net checks. My initial thought is to use the Pre-DME number "Selected and Evaluated Persons". This number seems to always match the number of persons "Selected" and "Evaluated" in posting to FI/CO.
Since many companies are restricting use of SE16 and access to many of the BT tables is locked down, I would like to use something that the end user has access to and can easily use. I don't believe the spools from RFFOUS_C and T are appropriate since it would have overflow pages (2 page REM Statements) in that number and thus would not be an accurate reflection of total number of payments.
I would appreciate your insight and thoughts on this topic.
Thanks!Hello Jennie,
This is what we do every payroll:
1. After running live payroll and before exiting our users run wage type reporter /559 to get the payroll net pay. They also run Postings to FICO simulation run to check payroll net pay GL account. This match all the time. So this is the first pass.
2. They finish all subsequent activities in PRD run upto RFFOUS_T.
3. We have developed a custom report which almost looks like REGUH which gives the net pay details by every payment method and amount to be deposited or paid. We match this report from the output we received from step 1.
4. Run postings to FICO live and check the payroll net pay GL account for final validation.
The steps might sound tedious but of a great use.
Arti -
Hii Can anyone tell me is there any possibility of giving some due payment like bonus or offcycle once employee termination is done along with the payroll run and posting.
ThanxOne Possibility is by making manual entry for that employee from FI side.. (this will give you soln..) Take the help of FI consultant...
Another possibility is in IT0003 "Payroll Status".. You can opt mention next month date "Run Payroll up to" & execute Off cycle payroll for that employee...
Just try this hope this may sort your issue....
If it still it doesn't give you soln.. You may need to reverse the posting of that employee & change employment status.. Run Bonus & finally terminate the employee & do the posting.. -
TABLE_FREE_IN_LOOP Error during payroll execution
hi grus,
i used a function module RP_FILL_WAGE_TYPE_TABLE in indirect valuation module for wage types in infotype 15 to read current data of infotype 8. it is working fine for infotype operations but during payroll execution i m getting an error of TABLE_FREE_IN_LOOP. kindly suggest me how to solve this problem as soon as possible.
161 * IF PP0015 IS REQUESTED.
162 IF CALL_BY_EXT = FALSE AND PP0015 IS REQUESTED OR "N0210677
163 CALL_BY_EXT = TRUE AND PP0015_REQUESTED = TRUE. "N0210677
164 P0015 = PP0015.
>>>>> P0015[] = PP0015[].
166 ELSE. "N0210677
167 CLEAR P0015. "N0210677
168 REFRESH P0015. "N0210677
169 ENDIF. "PP0015 IS REQUESTED.Hi Waheed,
Did you check OSS?
The following notes look promising to me in the sense that they are related to the HR module. Since I do not have much experience in this module, it is hard for me to judge if they are relevant or not. However I can imagine that a payroll run will perform a lot checks and therefore invokes a lot of other objects.
[Note 919345 - Function QUOTA: Program termination|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=919345]
[Note 962641 - QUOTA function: Program termination II|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=962641]
Kind regards,
Robert -
Unable to run the local bussiness server - Error during startup of BPA
When i installed the BPA tool and started the 'LOCAL' server in oracle BPA Network. I am getting an error saying 'Unable to run the local bussiness server'. Then i checked the log and found the foolowing errors. Please suggest !
LoG File 1:-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2009-03-10 22:18:53,199 [ ARIS Server Site Startup process ]
2009-03-10 22:18:53,199
2009-03-10 22:18:53,324 Started profile Private@17057
2009-03-10 22:18:53,324 Started profile Public@17055
2009-03-10 22:18:53,324 Started profile Agent@17058
2009-03-10 22:18:53,339
2009-03-10 22:18:53,339 Starting ARIS Nameservice 10.1.3.4.271679(Public)
2009-03-10 22:18:53,339
2009-03-10 22:18:53,339 Starting ARIS Eventservice 10.1.3.4.271679(Private)
2009-03-10 22:18:53,355
2009-03-10 22:18:53,355 Starting ARIS Nameservice 10.1.3.4.271679(Private)
2009-03-10 22:18:53,355
2009-03-10 22:18:53,355 Starting DB event initialisation 10.1.3.4.271679(Private)
2009-03-10 22:18:53,417 - event channel is created
2009-03-10 22:18:53,433
2009-03-10 22:18:53,433 Starting Aris LockService 10.1.3.4.271679(Private)
2009-03-10 22:18:53,433 - using mapping 'com.idsscheer.aris.server.dl.mapimpl.ora.AMapping'
2009-03-10 22:18:53,448 - using url 'jdbc:oracle:thin:@LOCALHOST:1521:orcl'
2009-03-10 22:21:53,459 Launch of Aris LockService failed!
2009-03-10 22:21:53,459
2009-03-10 22:21:53,459 [ There have been ERRORS, ARIS Server Site is going down ... ]
2009-03-10 22:21:53,459 Terminating ARIS Server Site ...
2009-03-10 22:21:53,459 Shutting down DB event initialisation ...
2009-03-10 22:21:53,475 Shutting down ARIS Nameservice ...
2009-03-10 22:21:53,475 Shutting down ARIS Eventservice ...
2009-03-10 22:21:53,475 Shutting down ARIS Nameservice ...
2009-03-10 22:21:55,487 ARIS Server Site terminated!
2009-03-10 22:21:55,487
2009-03-10 22:21:55,487 [ ARIS Server Site is down ]
2009-03-10 22:21:55,487
2009-03-10 22:21:58,498 Terminating ARIS Server Site ...
2009-03-10 22:21:58,498 ARIS Server Site terminated!
2009-03-10 22:59:48,606
2009-03-10 22:59:48,606 ARIS Server Site
2009-03-10 22:59:48,606 (c) 2005 IDS Scheer
2009-03-10 22:59:48,606
2009-03-10 22:59:48,606
2009-03-10 22:59:48,606 [ ARIS Server Site Startup process ]
2009-03-10 22:59:48,606
2009-03-10 22:59:48,762 Started profile Private@17057
2009-03-10 22:59:48,762 Started profile Public@17055
2009-03-10 22:59:48,762 Started profile Agent@17058
2009-03-10 22:59:48,762
2009-03-10 22:59:48,762 Starting ARIS Nameservice 10.1.3.4.271679(Public)
2009-03-10 22:59:48,777
2009-03-10 22:59:48,777 Starting ARIS Eventservice 10.1.3.4.271679(Private)
2009-03-10 22:59:48,793
2009-03-10 22:59:48,793 Starting ARIS Nameservice 10.1.3.4.271679(Private)
2009-03-10 22:59:48,793
2009-03-10 22:59:48,793 Starting DB event initialisation 10.1.3.4.271679(Private)
2009-03-10 22:59:48,855 - event channel is created
2009-03-10 22:59:48,855
2009-03-10 22:59:48,871 Starting Aris LockService 10.1.3.4.271679(Private)
2009-03-10 22:59:48,871 - using mapping 'com.idsscheer.aris.server.dl.mapimpl.ora.AMapping'
2009-03-10 22:59:48,887 - using url 'jdbc:oracle:thin:@LOCALHOST:1521:orcl'
2009-03-10 23:02:49,309 Launch of Aris LockService failed!
2009-03-10 23:02:49,309
2009-03-10 23:02:49,309 [ There have been ERRORS, ARIS Server Site is going down ... ]
2009-03-10 23:02:49,309 Terminating ARIS Server Site ...
2009-03-10 23:02:49,309 Shutting down DB event initialisation ...
2009-03-10 23:02:49,309 Shutting down ARIS Nameservice ...
2009-03-10 23:02:49,309 Shutting down ARIS Eventservice ...
2009-03-10 23:02:49,309 Shutting down ARIS Nameservice ...
2009-03-10 23:02:51,321 ARIS Server Site terminated!
2009-03-10 23:02:51,321
2009-03-10 23:02:51,321 [ ARIS Server Site is down ]
2009-03-10 23:02:51,321
2009-03-10 23:02:54,332 Terminating ARIS Server Site ...
2009-03-10 23:02:54,332 ARIS Server Site terminated!
Error Log 2:Exception
2009-03-10 18:19:39,019 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
2009-03-10 18:28:52,307 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
2009-03-10 22:21:53,459 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
2009-03-10 23:02:49,309 com.idsscheer.aris.server.Exceptions - Launch failed!
com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:368)
com.idsscheer.aris.server.common.launch.AFatalLaunchableInitException: Launch of Aris LockService failed!
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:65)
at com.idsscheer.aris.server.launcher.AArisLauncher.startService(AArisLauncher.java:548)
at com.idsscheer.aris.server.launcher.AArisLauncher.startServices(AArisLauncher.java:502)
at com.idsscheer.aris.server.launcher.AArisLauncher.launchAll(AArisLauncher.java:456)
at com.idsscheer.aris.server.launcher.AArisLauncher.trystart(AArisLauncher.java:365)
at com.idsscheer.aris.server.launcher.AArisLauncher.startup(AArisLauncher.java:302)
at com.idsscheer.aris.server.launcher.AArisLauncher.main(AArisLauncher.java:155)
Caused by: java.lang.RuntimeException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:111)
at com.idsscheer.aris.server.launcher.AArisLaunchable.startup(AArisLaunchable.java:63)
... 6 more
Caused by: com.idsscheer.aris.server.dl.ls.core.AFatalInitException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:79)
at com.idsscheer.aris.server.dl.ls.core.logic.ALockServiceFactoryInternal.createLockService(ALockServiceFactoryInternal.java:43)
at com.idsscheer.aris.server.dl.ls.core.ALockServiceFactory.createLockService(ALockServiceFactory.java:22)
at com.idsscheer.aris.server.launcher.ARemoteLockServiceLaunchable$ALaunchableImpl.startup(ARemoteLockServiceLaunchable.java:106)
... 7 more
Caused by: com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher$ACannotStartException: timeout exceeded, cannot connect to database server (url=jdbc:oracle:thin:@LOCALHOST:1521:orcl)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.waitUntilServerIsUp(AOraLauncher.java:87)
at com.idsscheer.aris.server.dl.mapimpl.ora.dblauncher.AOraLauncher.startup(AOraLauncher.java:60)
at com.idsscheer.aris.server.dl.mapimpl.ora.AMapping.startDatabase(AMapping.java:76)
... 10 more
----------------------------------------------------------------------------------------------------------------------------------------------S1:I uninstalled BPA.
S2: I installed BPA again using the default options by selecting all the default options that the BPA showed during installation. EG. I selected 'Oracle Lite' which was by default an option.
S3: After BPA installation, I also installed BPA Publisher which i had not done last time.
S4: Restated my system and it all works gr8 now.
Actually, the BPA Publisher creats a Repository area so it should have been installed along with the BPA installation. And Since a Repository area was not found it was giving this error message again and again.
Now its all fine . Hopefully, some one else will learn from my mistakes. -
Error occurred during CTM planning run
Hi folks,
Appreciate your co-operations!
I am facing the problem while running the CTM with the profile DEMO2.
CTM Planning Run gives one error and alert.
Error: Error occurred during CTM planning run
Technical Data
Message type__________ A (Cancel)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 401
Problem class_________ 1 (very important)
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ A
Alert: Internal error has occurred (<!> Segmentation fault)
Technical Data
Message type__________ E (Error)
Message class_________ /SAPAPO/CTM1 (CTM: Messgaes)
Message number________ 571
Message variable 1____ <!> Segmentation fault
Number________________ 1
Environment Information
CTM Action____________ G
Message type__________ C
Log file display
<i> 04:37:59 optsvr_main.cpp(1363) 'SuperVisor' => Commandline : 4 respected parameters ...
Args:
m0001006
sapgw04
28812935
IDX=1
<i> 04:37:59 optsvr_main.cpp(645) 'SuperVisor' * SAP APO CTM Engine [CTM/ctmsvr]
<i> 04:37:59 optsvr_main.cpp(646) 'SuperVisor' * Copyright u00A9 SAP AG 1993-2009
<i> 04:37:59 optsvr_main.cpp(647) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(648) 'SuperVisor' * Version : 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
<i> 04:37:59 optsvr_main.cpp(649) 'SuperVisor' * Platform : ntamd64/x64
<i> 04:37:59 optsvr_main.cpp(650) 'SuperVisor' * Interface : 2.0
<i> 04:37:59 optsvr_main.cpp(651) 'SuperVisor' * Build date : Nov 25 2009 22:59:47 [1259186387]
<i> 04:37:59 optsvr_main.cpp(652) 'SuperVisor' * Build machine : PWDFM163
<i> 04:37:59 optsvr_main.cpp(653) 'SuperVisor' * Latest change : 407661
<i> 04:37:59 optsvr_main.cpp(654) 'SuperVisor' * NW release : 7100.0.3300.0
<i> 04:37:59 optsvr_main.cpp(655) 'SuperVisor' * Perforce branch: 7.0_REL
<i> 04:37:59 optsvr_main.cpp(656) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(676) 'SuperVisor' * Hostname : m0001006
<i> 04:37:59 optsvr_main.cpp(677) 'SuperVisor' * OS version : 5.2.3790 (WinServer2003, NTAMD64) SP2.0 (Service Pack 2), SERVER ENTERPRISE TERMINAL SINGLEUSERTS
<i> 04:37:59 optsvr_main.cpp(678) 'SuperVisor' * PID : 6768
<i> 04:37:59 optsvr_main.cpp(683) 'SuperVisor' * CWD : D:\usr\sap\SC6\DVEBMGS04\log
<i> 04:37:59 optsvr_main.cpp(684) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(453) 'SuperVisor' * free disk space: 190433 MB
<i> 04:37:59 core_sysinfo.cpp(454) 'SuperVisor' *
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * Memory information:
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * physical memory: 10238 MB total, 6511 MB available [63% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * page file : 73212 MB total, 60889 MB available [83% free]
<i> 04:37:59 core_sysinfo.cpp(409) 'SuperVisor' * virtual memory : 8388607 MB total, 8388499 MB available [99% free]
<i> 04:37:59 optsvr_main.cpp(693) 'SuperVisor' *
<i> 04:37:59 optsvr_main.cpp(783) 'SuperVisor' * running in invoke mode
<i> 04:37:59 optsvr_rfcconnection.cpp(871) 'MsgMgr' <RFC> RfcPing(RFC_HANDLE=1) received in thread#6912
<i> 04:37:59 optsvr_rfcconnection.cpp(692) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_SET' for sending of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(703) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PARAM_GET' for receiving of parameters/options
<i> 04:37:59 optsvr_rfcconnection.cpp(712) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PROGRESS' for progress informations
<i> 04:37:59 optsvr_rfcconnection.cpp(721) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_MESSAGE' for messages
<i> 04:37:59 optsvr_rfcconnection.cpp(730) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_RESULT' for (intermediate) result informations
<i> 04:37:59 optsvr_rfcconnection.cpp(739) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_SYSINFO' for system informations
<i> 04:37:59 optsvr_rfcconnection.cpp(748) 'MsgMgr' <RfcConnection> using function module 'RCCF_COMM_PERFINFO' for performance informations
<i> 04:37:59 optsvr_rfcconnection.cpp(1269) 'MsgMgr' <RFC> skipping empty profile value [GENERAL] sPROFILE_CUST_ID
<i> 04:37:59 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 7
number of received data: 10569
number of sent data : 1349
overall reading time : 9073
overall writing time : 162
<i> 04:37:59 optsvr_main.cpp(1110) 'SuperVisor' * Starting MainScript ...
<i> 04:37:59 optsvr_main.cpp(1445) 'SuperVisor'
***************************** OPTSVR - OPTIONS ***************************** *
[CTM_PROFILE]
nCTMENGINEPACKAGESIZE = 500
sCOMPONENT = SCM
sCTMLOGFILE = ctm.DEMO2.0000_0001.20091201043758.log
sCTMLOGFLAG = 0
sCTMPROFILE = DEMO2
sRELEASE = 700
[general]
bUNICODE = true
nSLOT_MAXIMUM = 1
nSLOT_MINIMUM = 1
nSLOT_RESERVED = 1
sAPO_RELEASE = 700
sAPPLICATION = CTM
sExeDir = d:\apoopt\ctm\bin
sExeName = ctmsvr.exe
sHOST = m0001006
sInvokeMode = invoke
sLANGU = E
sMANDT = 700
sPRODUCT_NAME = APO
sPRODUCT_PATCHLEVEL = 0001
sPRODUCT_RELEASE = 700
sPROFILE = DEMO2
sSESSION = tju5Bmz21}6WVG0Sn6pv3W
sSYSTEM = SC6
sUNAME = MBATCHA
[init]
sSECTION0001 = INIT
sSECTION0002 = GENERAL
sSECTION0003 = PASSPORT
sSECTION0004 = CTM_PROFILE
[PASSPORT]
bIS_REMOTE = false
nACTION_TYPE = 1
nSERVICE = 1
sACTION = /SAPAPO/CTMB
sPRE_SYSID = SC6
sSYSID = SC6
sTRANSID = 2205DEDE7A5BF16DA07D001CC46CF90E
sUSERID = MBATCHA
************************** OPTSVR OPTIONS - END **************************** *
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 802 to OutputInterface from []
<i> 04:37:59 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->download
<i> 04:37:59 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 806 to OutputInterface from [MG]
<i> 04:37:59 ctm_modelgen.cpp(166) 'CTMModelGenerator' ======================================================================
<i> 04:37:59 ctm_modelgen.cpp(167) 'CTMModelGenerator' MG::download
<i> 04:37:59 core_msgmgr.cpp(1110) 'MsgMgr' renaming tracefile
<i> 04:37:59 core_msgmgr.cpp(1111) 'MsgMgr' old name: optsvr_trace20091201_043759_1a70.log
<i> 04:37:59 core_msgmgr.cpp(1112) 'MsgMgr' new name: ctm.DEMO2.20091201_043759_1a70.log
logfile reopened : Tue Dec 01 04:37:59 2009
logfile name : ctm.DEMO2.20091201_043759_1a70.log
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PRDAT_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPAR_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_LOC_RFC_READ
<i> 04:37:59 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PPM_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_TRANS_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_RES_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SSTCK_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_CAL_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_PLPER_RFC_READ
<i> 04:38:02 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_INCMD_RFC_READ
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:03 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_DEM_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_SUP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_UCMAP_RFC_READ
<i> 04:38:04 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:04 core_msgmgr.cpp(440) 'MsgMgr' * Sending progress number 810 to OutputInterface from [MG]
<i> 04:38:04 ctm_modelgen.cpp(735) 'CTMModelGenerator' MG::download done
<i> 04:38:04 ctm_modelgen.cpp(736) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CTMModelGenerator' [6]->download = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Solve' with 9.22337e+012 seconds left
<i> 04:38:04 core_supervisor.cpp(692) 'SuperVisor' <SCR> Starting script 'CTM Match' with 9.22337e+012 seconds left
<i> 04:38:04 ctm_executionmanager.cpp(102) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(103) 'SuperVisor' statistics:
<i> 04:38:04 ctm_executionmanager.cpp(104) 'SuperVisor' number of demands: 7
<i> 04:38:04 ctm_executionmanager.cpp(105) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(107) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(108) 'SuperVisor' parameters:
<i> 04:38:04 ctm_executionmanager.cpp(118) 'SuperVisor' time continuous planning
<i> 04:38:04 ctm_executionmanager.cpp(125) 'SuperVisor' backward scheduling
<i> 04:38:04 ctm_executionmanager.cpp(184) 'SuperVisor' CBCLP enabled
<i> 04:38:04 ctm_executionmanager.cpp(457) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CtmEngine' [7]->run
<i> 04:38:04 ctm_executionmanager.cpp(523) 'SuperVisor' ======================================================================
<i> 04:38:04 ctm_executionmanager.cpp(524) 'SuperVisor' EM::execute for packet 1
<i> 04:38:04 ctm_executionmanager.cpp(1570) 'SuperVisor' EM::execute for packet 1 done
<i> 04:38:04 ctm_executionmanager.cpp(1571) 'SuperVisor' ======================================================================
<i> 04:38:04 core_supervisor.cpp(750) 'SuperVisor' <M> Returning from module 'CtmEngine' [7]->run = success [ctx size : 1]
<i> 04:38:04 core_supervisor.cpp(728) 'SuperVisor' <M> Invoking module 'CTMModelGenerator' [6]->upload
<i> 04:38:04 ctm_modelgen.cpp(1097) 'CTMModelGenerator' ======================================================================
<i> 04:38:04 ctm_modelgen.cpp(1098) 'CTMModelGenerator' MG::upload of packet 1
<e> 04:38:05 ctmsvr_script.cpp(229) 'SuperVisor' <!> STRING EXCEPTION : <!> Segmentation fault
<i> 04:38:05 rfc_connection.cpp(599) 'MsgMgr' <rfc> calling function module /SAPAPO/CTM_INT_STATUS_SET
<i> 04:38:05 optsvr_main.cpp(1166) 'MsgMgr' Current check values:
[CHECK_EQUAL]
[CHECK_UPPERBOUND]
nPEAK_MEMORY_NTAMD64 = 45344
[CHECK_LOWERBOUND]
<i> 04:38:05 optsvr_main.cpp(1209) 'MsgMgr' Performance values:
bSuccess false
nCPU_TIME 0
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
tracefile ctm.DEMO2.20091201_043759_1a70.log
<i> 04:38:05 optsvr_main.cpp(1235) 'MsgMgr' Performance Monitor values:
ENGINE_VERSION 7.0_REL SP05, 407661, Nov 25 2009 22:59:47
nCPU_TIME 0
nHD_FREESPACE 190433
nPEAK_MEMORY 45344
nPEAK_VIRTUAL_BYTES 141844
nREAL_TIME 6
<i> 04:38:05 optsvr_dsr.cpp(96) 'MsgMgr' <writeDSRdata> tracing not active => no DSR written
<i> 04:38:05 optsvr_main.cpp(1256) 'SuperVisor'
Finished->FAILED ...
<i> 04:38:05 core_memmgr.cpp(564) 'MsgMgr' transferring memory of heap 6912 to main heap
<i> 04:38:05 core_memmgr.cpp(606) 'MsgMgr' finished transfer of heap 6912
<i> 04:38:05 optsvr_rfcconnection.cpp(1835) 'MsgMgr'
Sender/Receiver RFC_HANDLE#1:
<RFC> * RFC connection attributes:
Own Host : m0001006
Partner Host: m0001006
Destination : OPTSERVER_CTM01
Program Name: SAPLRCC_COMM_ENGINE
SystemNr : 04 SystemId : SC6
Client : 700 User : MBATCHA
Language : E ISO Language: EN
CodePage : 1100 Partner CP : 1100
Kernel Rel. : 701 Partner Rel.: 701
Own Release : 711 CPIC ConvId : 28812935
Own Type : E PartnerType : 3
Trace : RFC Role : S
<RFC> * RFC statistic information:
number of calls : 116
number of received data: 420457
number of sent data : 39262
overall reading time : 5.30093e+006
overall writing time : 3831
<i> 04:38:05 optsvr_main.cpp(1332) 'MsgMgr'
OptimizeServer says GOOD BYE
Please help me to resolve this issue.
Thanks & Regards,
KhadarHi Khadar,
1) The information you have provided is the CTM optimiser log.
Run the job in background and in sm37 and click on job log &
analyse the exact error happened. In case if you are not able
to do, please provide the error log.
2) Check the livecache is stable in its operations when the job
runs (check with basis team)
3) Run consistency check for master data before CTM run
4) Check for any struck queues and clear those and rerun
5) If you feel more inconsistencies in system, run livecache
consistency and rerun CTM run
Regards
R. Senthil Mareeswaran. -
Travel Expense - Posting run error - Error during creation of posting run
Hi Guru's,
Look forward for your insights. Here you go with my question.
We are implementing Expense Mgt with Portal with out scope for payroll in SAP. I have set up Expense type, WT, Symbolic A/c to G/L Accounts. Im performing Unit testing currently.
Created Expense trip in ESS, from R/3 tcode PRAP, have approved trip, and settled through Tcode - PREC.
When I try to create posting run under transfer to accounting, I get following error
Error during creation of posting run number (->PR1
Message no. 56840
I'm not sure why this error was popping up. Appreciate your suggestion.
Regards
Praveen.NHi,
Since you are trying to make payment through FI, you need to maintain ur employee as Vendor. You can do it through PRAA.
So while creating posting run for this trip, it checks if the respective Vendor for this employee is maintained or not.
Pls maintain it as vendor and see if the errors are still coming.
Rakesh -
Update was terminated during VF01 with an error during FM RV_INVOICE_POST
Dear All,
In my current assignment, while saving the invoice document the excise invoice and billing document in the background got created but not been updated in the database. i am facing the update was terminated error in the analysis it was understood that the error appeared during the FM : RV_INVOICE_POST. I had validated the number ranges, for objects J_1IEXCLOC and J_1IINTPR2, & J_1IINTNUM RV_BELEG. All the number range assignments were proper, but some how the error remains same. The CIN master data is also maintained. In the current assignment, the number ranges were not maintained in the billing document type, instead a custom table is maintained based on the combination of sales org and billing type. However the to and from range is as usually maintained in SNUM. I even referred to the sap note 407606 but it could not help.
I would appreciate your valuable time and effort while assisting me in this regards.
Thanks & Regards,
Surya.Hi,
Whenver you are seeing this issue, are you getting a pop up message (update terminated) after the success message. If yes then go immediately to ST22. You could see a dump. Ask your ABAPer to find the route cause for the dump. If possible post the reason for dump. I hope you could get some help on that.
Cheers, -
Quicktime errors during install, uninstall, or run
Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.
I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
(Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
So let's try investigating that possibility first.
First we'll adjust some view settings on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
Getting windows error during running the sql scripts from form 6i
I made a little form application. The purpose of this application is to generate explain plan for a particular SQL. Some sql scripts run internally in order to populate the result on forms screen after pressing the forms button but I am getting windows error during running the sql scripts from form 6i.
I am using forms 6i with patch 17 with Oracle 10G database on windows 2000 professional on same computer.
This application runs fine with 8i.
Please inform me where the problem is and how to overcome it.
Zafri.I am using Text_IO in my form's when button press trigger , inorder to create the
text file, then in the same when button press triger
I am calling RMAN via host command in order to run the script which was created by text_IO.
Below you find some of the code. I will appreciate if you solve the problem.
when button press trigger:
Declare
in_file3 Text_IO.File_Type;
linebuf3 VARCHAR2(1800);
output11 varchar2(1000);
BEGIN
output11:='C:\EXPLAIN_PLUS\misc\rm_file.bat ';
Host(output11,no_screen);
:sql.execution_plan:= 'Working........................';
synchronize;
in_file3 := Text_IO.Fopen('c:\explain_plus\misc\create_table.txt', 'w');
Text_IO.Put_Line(in_file3, linebuf3);
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' run { sql "create table PLAN_TABLE (statement_id,...object_name varchar2(30),object_instance numeric,object_type varchar2(30),optimizer varchar2(255),search_columns number,id .....partition_start varchar2(255),partition_stop varchar2(255),partition_id numeric,other long,distribution varchar2(30)) "; } ');
Text_IO.put_line(in_file3,' ');
Text_IO.put_line(in_file3,' ');
Text_IO.FCLOSE(in_file3)
Declare
un VARCHAR2(80);
pw VARCHAR2(80);
cn VARCHAR2(80);
output VARCHAR2(1000);
output2 VARCHAR2(1000);
dummy varchar2(40);
in_file Text_IO.File_Type;
linebuf VARCHAR2(1800);
BEGIN
Get_Connect_Info(un,pw,cn);
/* for Plan_table Begg. Second INNER BLOCK */
declare
dummy2 varchar2(40);
begin
select table_name into dummy2 from all_tables where table_name='PLAN_TABLE';
if dummy2 = 'PLAN_TABLE' then
output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\MISC\TRUNC2.txt ' ;
Host(output2,no_screen);
end if;
exception
when no_data_found then
output2:='rman target/ nocatalog @C:\EXPLAIN_PLUS\misc\create_table.txt ';
Host(output2,no_screen);
end; -- -
I encounter 2 errors in the controller when running FSCT.
- "There were errors during running WordFileClose.dll scenario"
- "There were errors during running WordFileClose.dll scenario"
Does anyone has any ideas for this errors?
I am using the following server to run the FSCT:
- AD Server: Windows 2008 R2 SP1 x64
- FSCT Controller: Windows 2008 R2 SP1 x64
- Client: Windows 7 x64
- File Server: Non-Windows Server (EMC Isilon)
And the commands are as follows:
> fsct prepare dc /users 10 /clients testing /password password
> fsct prepare controller
> fsct prepare client /server ofscluster /password password /users 10 /domain abc.local /server_ip 192.168.2.16
> fsct prepare server /clients testing /password password /users 10 /domain abc.local /volumes \\ofscluster\fsroot1 /workload HomeFolders /create_only_fileset
> fsct run client /controller fsctcon /server ofscluster /password password /domain abc.local
fsct run controller /server ofscluster /password password /volumes \\ofscluster\fsroot1 /clients testing /min_users 2 /max_users 10 /step 2 /duration 360 /workload HomeFoldersDear all,
The errors were:
<Error>1264 DeviceIoControl 1{WINERR}</Error>
<Error>Error executing scenario: WordFileOpen.dll</Error>
<Error>943 DeviceIoControl 50{WINERR}</Error>
<Error>Error executing scenario: WordFileClose.dll</Error>
Do you have any idea about what the errors mean?
Thanks,
Rayson
Maybe you are looking for
-
Apple Thunderbolt to FireWire Adapter Compatibility
Will the Apple external isight firewire web cam work on the macbook air through the Apple Thunderbolt to FireWire Adapter.
-
Is it possible to restrict the available export formats in InfoView?
Hi all, I uploaded some reports to Crystal Reports Server 2008. For most of them the user should be able to export them to CSV when viewing them in InfoView. For some reports this does not work correctly because they contain embedded subreports, cros
-
Dropped off my N80 at my local service centre earlier on today to upgrade firmware. Got a phone call a couple of hours later from the engineer telling me that there has been 10 updates released for my phone for the version I have(I only got it last f
-
Is there any provision to attach a document while an employee requests for a leave in ESS? Actually my requirement is that the employee should be able to attach a medical statement along with the request when he is applying for Sick Leave. At the sam
-
Hi all, I've been trying (in vain) to create a good dialogue box that does some bounds checking on user inputs before allowing them to be sent to the main application. Ideally, when an input is out of range, it'll blink until it gets put into range.