Termination error while creating and saving Work Order from a Notification

Hi All,
While creating Work Order from a Maintenance Notification, we get a error message "Update Termination OPROL Initial Number". This happens even while creating Maintenance Notification & Work Order separately and assigning the Notification in the Objects tab of the Order subsequently.
Could any body please help in this issue.
Thanks,
SS

Hi Sourabh,
Please check the link:
Express Document Update terminated while Scheduling Preventive single Plan
it will help you, it is actually the Number range issue.
Regards,
Yawar Khan

Similar Messages

Error while creating OTR by sales order from SAP ECC to TM

Hi Experts,
We are trying to integrate ECC to TM. As of now we have managed to send sales order to TM but getting the following error. Messages are getting failed in SAP TM. Even if the product exists in the system (TM) still the error message persists. I have CIFed location, business partner, product from ECC and everything exists in SAP TM with the same business system group. Kindly advise.
Thanks & Regards,
Aunkur De

Hello Aunkur De,
Could you check if the business partner was assigned in to your location?
I have passed for a issue like that.
Best regards,
Vicente Picardi

Error while creating and opening a ERP sales order in SAP CRM

Hi,
I am getting an error while creating or opening a ERP sales order from SAP CRM.
"Creation of the ERP Transaction failed" this is the error i'm getting while creating. when i try to open an existing sales order I'm getting a dump.
Attached the dump screen shot. From the dump analyasis it seems the transactions are not loaded through LORD framework.
The RFC connection seems to fine as i have tested accessing an ECC RFC FM through a sample program and its successful..
please help..
Thanks
Krishna

Hello Krishna,
Did you get a solution to this? I have the same dump message.
As a matter of fact, we already use ERP Sales Order and it works fine. But I have recently configured a new sales order document type, and the dump occurs only for this new Z order type.
Thanks a lot,
Luis.

Update Termination Error while creating Delivery

Hello Experts,
I am trying to create delivery with reference to Standard Order when I click on SAVE I am getting message that delivery is being created. But when I am trying to open the same delivery in change mode I am getting Update termination Error saying delivery not created.
So what I tried doing is while creating delivery I have given Picked quantity and done with PGI then i am able to save the Delivery successfully and table LIKP is also updated. But this is not always that I can do. In my production system, without doing PGI I should able to save Delivery.
Please could anybody help me on this ..is there any SAP notes?
PS: My system is upgraded from ECC 6.0 Ehp2 to ECC 6.0 Ehp7.
Many Thanks in advance.
Priyanka J.

Hello Kiran, Hello Klaus,
Below are the details;
Function Module
RV_DELIVERIES_SAVE
Status
Update was terminated
Report
LV50UF0L
Row
50
Error details   Class:
00
Number:
671
Internal session terminated with a runtime error POSTING_ILLEGAL_STATE
MENT (see ST22)

Error while creating a Fixed Price Order

Hi
I am creating a Fixed Price order for a customer which is created in the system.
However, while doing so I am getting an error message, "No Customer Master Record exists for sold-to-party XXXXXXXXX.
Please suggest.
Thanks,

hi
Check Table KNVV and KNVP, whether the customer is amintained or not.
Go to SPRO --> IMG --> Sales and Distribution --> Basic Settings --> Partner Determination --> Set up Partner Determination
Here u have to maintain procedure and its assignments, and then assign Procedure to the account group that you have created, and also maintain relevant partner functions to the account group created by you.
Also check whether the customer is maintained as SP or not
Check SP PATNER FUNCTION exist in your customer master or not.

Error while creating quotation in sales order verion ?

Dear All,
while creating an quotation in sales order version management getting an error.
Sales Doc. MsgType Message Class        Msg.No. Message text
           E       AM                        53 Specify either address number or address
           W       V1                       555 The sales document is not yet complete:
           E       V4                       219 Sales document was not changed
thanks
vincent

Dear Vincent
May be this is related ABAP Issue please check with them because i found same issue
"BAPI_SALESORDER_CREATEFROMDAT2" - getting error while executing in se37.
"Specify either address number or address handle " BAPI_SALESORDER_CREATEFR

Credit Card authorization error while creating an online sales order in ISA

Hi All,
I did the basic configuration for the webshop for B2C functionality in ISA R/3. When I choose a product from the product catalog, add it to a shopping cart, choose credit card option, enter a valid credit card and expiration date and confirm the order I get the error 'Unsuccessful credit card authorization'. But I can create an order successfully using VA01 transaction in R/3 with the same header and item level data and the credit card data. What can be the reason behind this error and how to fix it? Please let me know.
Thanks in advance.
--R D

Did you fix this issue?

Material Reservation Create Upon Saving Work Order

Dear Experts,
We have a requirement that material reservation needs to be created upon release of the PM order. However in SAP standard it is created upon saving the PM order.
Do you know the way how to change it that reservation will be created upon release of the PM order? Is there any OSS note etc. I had a search on service place in SAP but couldnt find something relevant sofar.
Any help, idea will be highly appreaciated.
thanks in advance,
Mehmet

Hi
Yes you can configure the system using standard setting where the reservation will be gerated after order release.
Please follow the following path.
1. SPRO> SAP Standard IMG setting> Plant Maintenance & Customer service-->Maintenance & service Processing > Maintenance and Service Orders>Functions and Settings for Order Types-->Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
In this step, you can define:
Whether reservations or purchase requisitions relevant to materials planning should be generated when an order is created or only when the order is released. You do not select the field reservation/purchase requisition. The result is that purchase requisitions are only generated when the order is released, and reservations only become relevant to materials planning once the order has been released.
I think this will resolve your query if not let me know.
Regards
Makarand Gurjar

Shipping point error while creating delivery for subcontracting order

Hi,
I am trying to send Materials Provided to a Subcontractor via an SD Delivery using std SAP functionality using IDES preconfigured system.
In transaction ME2O, while creating delivery, i am facing following error:
Essential transfer parameters are missing in record: 000002
The dignosis gives following details.
Diagnosis
Information necessary for this delivery is missing.
Please help to sort out the problem.
Regards
SAmeer

Hi Sameer
please check OSS notes 102104 for detail help about this error.
regards
Srinivas

Error while creating projects in SAP-PS from cProjects

Hi,
Need suggestion on creating projects in SAP-PS from cProjects. There is cProjects & SAP-PS interface.The requirment is to create project in SAP-PS from cProjects. All the configuration has done in cProjects & PS module also. While saving the projects & checking the accouting the following error & project is n't creating.
1.Combination company / CO area is invalid Message no. KO124
2.Acct assignment determination is not poss.in the account assgnmnt manager
Message no. IAOM220
3.Only one error message is transferred from the log to the cockpit
Message no. IAOM_CPROJECTS029
I would like to request all to suggest in fixing the issue.
Thank you for your coopearation.
Regards,
Ranjan

Hi Ranjan,
If the companay code does not belong to the Co area, the system will certainly raise an error message. The question is, where do the values come from.
Woud you please check the customizing in ERP system, if you can find the inconsistence:
1. Customizing of the Proj.Profile under 'Create Project Profile' , SAP standard delivered is CPR0001, may be replaced by customer,
Which Co-area & company code are used. In Tab 'organization'
2. Which responsible Org.unit is maitained at involved cProject, to which co-area or company codes is this org.unit assigned.
3. If the Badi under the
Integration with Other mySAP.com Components ->
Collaboration Projects -> Controlling -> Business Add-Ins (BAdIs),
which set the org. information hardly via Badi method.
Kind regards,
Zhenbo

Creating and saving a photo from video clip in iMovie '11

Hello,
My dad took what he thought were photos from his iPhone. Turned out to be a bunch of one second video clips as he accidentally had it on the video camera mode. Trying to create a still photo image from these clips. What's the best way to do this? Is iMovie able to do this? If so, some guidance would be greatly appreciated.
I did try searching with no luck.
Thanks for your help,
AJ

You can import the clips from your iPhone into iMovie 11.
There are two approaches. Let's call them the shotgun approach and the rifle approach.
Shotgun approach:
Drag the 1 second video clips into an iMovie Project. Then SHARE/EXPORT USING QUICKTIME.
Choose Still image sequence. This will give you 30 jpegs per second for all the clips. In other words, it will give you every single frame, converted to a still.
Rifle Approach:
Download a free app to your Mac called MPEG Streamclip from Squared 5.
Open MPEG Streamclip.
In iPhoto, right click on one of the Video clips, and select "Show in Finder".
Drag these clips from the Finder into MPEG Streamclip. You should be able to hit the Play button and see them all.
Move the playhead in MPEG Streamclip to the exact frame that you want. Then click FILE/Export Frame. You can choose whether you want JPEG, TIFF, or PNG. And choose a location. Move the playhead to the next frame you want and repeat.

Printer name is Truncated while creating TO in WM area from QM notification

Dear All,
While creating transfer order(WM) from QM notification. I am getting error "device <printer name> does not exist". Even though printer name is available i am getting this error. When the length of printer name is greater than 4 only i am facing this error.
while checking the screen 3000 in program SAPLQMLR . Field LTAP-LDEST is not checked for Scrollable option. Where as the same field is used in WM T.code LT01 there scrollable option is checked , if we select the same printer system is accepting.
I searched for SAP noted i dint find any thing related to this.
Have any one faced such problem and got any solution. If so please provide the details.
I would like to get suggestion to over come this bug.
Thanks in Advance.
Regards
Srihari.P

There is a notes available in SAP. Using this only it is possible to solve this problem
Regards
Srihari P

SNC : Error while creating Subcon PO with Order (F) account assignment cat

Hi,
I am trying to implement Outsourced Manufacturing scenario with ECC 604 and SNC 7.0
We would like to demonstrate "Real Time Consumption" once a phase has been completed for WO in SNC.
For this, it is necessary create Subcon PO with A/c assignment category F. While trying to create PO, i get the following error:
1. Acct assignment determination is not poss.in the account assgnmnt manager
Message no. IAOM220
Diagnosis
Errors occurred during the determination of the account assignment in the account assignment manager. Thus it is not possible to determine the account assignment.
2. Characteristics for Controlling object have errors
Message no. IAOM034
Diagnosis
There are errors in the characteristics that are transferred when creating or changing a Controlling object.
System Response
Processing stopped.
Procedure
Look at the messages prior to this object in the error log. They give an indication as to which characteristics have errors.
3. Hierarchy level 01 not defined in business scenario Outsourced Manufacturing
Message no. IAOM027
Diagnosis
In business scenario 'Outsourced Manufacturing', hierarchy level 01 was accessed. There is no key characteristic defined for this hierarchy level.
System Response
Processing is terminated.
Procedure
Inform SAP or the provider of the business scenario, if the business scenario was not provided by SAP.
If you are responsible for the business scenario yourself, check the definition of the business scenario.
Settings specific to CO order that have been maintained:
IAOM1 - Maintain Controlling Scenario
IAOM2 - Maintain Controlling Integration
KA02 - Default Cost assgnmnet
Tick RT consumption in ME11 (Vendor Purchasing Info Record).
Any idea???
Regards,
Sandeep

Dear,
Did you also experience the following?
We are at the following step in the scenario:
Supplier confirms production progress =>Manufacturingworkorderproductionprogressnotification XML is generated => POST component consumption is executed in the R/3 system (ECC 6 EHP4).
We see the following problems after posting the component consumption
-     table EKBE_SC is not filled
-     in transaction kkf3 => CO production order => no booking/posting of progress
-     Component consumption is reflected in an outbound delivery with movement type 543, but it is missing the link with the purchase order+item (see screenshot below) => as a result any post issue booking is not possible.
Thanks for your help.
Kindr regards,
Stefan Hemeryck

Error while creating Subcon PO with Order (F) account assignment cat

Hi,
I am trying to implement Outsourced Manufacturing scenario with ECC 604 and SNC 7.0
We would like to demonstrate "Real Time Consumption" once a phase has been completed for WO in SNC.
For this, it is necessary create Subcon PO with A/c assignment category F. While trying to create PO, i get the following error:
1. Acct assignment determination is not poss.in the account assgnmnt manager
Message no. IAOM220
Diagnosis
Errors occurred during the determination of the account assignment in the account assignment manager. Thus it is not possible to determine the account assignment.
2. Characteristics for Controlling object have errors
Message no. IAOM034
Diagnosis
There are errors in the characteristics that are transferred when creating or changing a Controlling object.
System Response
Processing stopped.
Procedure
Look at the messages prior to this object in the error log. They give an indication as to which characteristics have errors.
3. Hierarchy level 01 not defined in business scenario Outsourced Manufacturing
Message no. IAOM027
Diagnosis
In business scenario 'Outsourced Manufacturing', hierarchy level 01 was accessed. There is no key characteristic defined for this hierarchy level.
System Response
Processing is terminated.
Procedure
Inform SAP or the provider of the business scenario, if the business scenario was not provided by SAP.
If you are responsible for the business scenario yourself, check the definition of the business scenario.
Settings specific to CO order that have been maintained:IAOM1 - Maintain Controlling Scenario
IAOM2 - Maintain Controlling Integration
KA02 - Default Cost assgnmnet
Tick RT consumption in ME11 (Vendor Purchasing Info Record).
Any idea???
Regards,
Sandeep

well it seems to be an CO issue
please check if the g/l is maintained as cost element
also check the setting s of account assignment catergory F and let us on which modifier key is maintained there make sure in OBYC-GBB the g/l is maintained for the material valuation class and which should be cost lement

Update terminated error while doing changes in sales order

Hi
We had found below error message while trying to save a sales order
RV_sales_document_update
Report-LV45UF0V
Row 265
Error details-SAPSQL_ARRAY_INSERT_DUPREC-671
This had happened for 2 sales orders alone..
"SAPSQL_ARRAY_INSERT_DUPREC" "CX_SY_OPEN_SQL_DB"
"SAPLV45U" or "LV45UF0V"
"VBEP_BEARBEITEN"
We are not using any user exit for VBEP...
Can u please tell us how to overcome this error
Regards
Sudha

How was it solved ? I have the same Issue.
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. And consider opening your own thread on this >>
Thanks
Abhinav
Edited by: Rob Burbank on Jan 12, 2011 4:08 PM

Termination error while creating and saving Work Order from a Notification

Similar Messages

Maybe you are looking for