Termination: France - ERP 6.0
Dear All,
I am involved in SAP HR Upgrade from R/3 4.6c to ERP 6.0.
One of the enchanced functionalities in ERP 6.0 is the way termination is being handled in France. In the latest version, once the employee gets terminated, the system automatically calculates all redundancy payments according to French Legislation.
Does anyone have any idea how this functionality has been handled on the technical front in ERP 6.0?
Thanks and regards,
Vivek
Hi Vivek,
You probably should post this question in the HR forum here on SDN.
Cheers,
Mike.
Similar Messages
-
"Program terminated in remote system NONE: Logon failed" when adding a new table
Hello,
I set up a replication flow from a SAP ERP 6.0 EHP7 with SAP ASE 16.0 source to SAP HANA 1.0 rev 82 target
I am using a standalone SLT system NetWeaver 7.0 with DMIS 2011_1_731 (with SP 1 to 7).
I have 100 tables to replicate.
I succeeded to set up replication for 57 tables. These tables are replicating properly.
Whenever I try to add a new one (with LTRC transaction, Data Provisioning -> Start Replication), the new table is marked as 'Failed' after a little while.
When I press 'Show Error Log' button I got an obscure error message:
"Program terminated in remote system NONE: Logon failed "
I do not understand this message. I checked both on SAP ASE source and SAP HANA target. I am still able to connect against both source and target.
Can you please tell how to troubleshoot this error.
Thanks in advance,
ChristianFirst thank you for answering my questions. I really appreciate your answers.
I rechecked the documentation.
"Application Operations Guide SAP Landscape Transformation Replication Server Document Version: 2.3 – 2014-07-08"
Page 29 - 30
3.5.2.2 Data Transfer Jobs
This section explains the relationship between the number of data transfer jobs and the number of available background work process.
Data transfer and data transformation processing on SLT server system is accomplished by the background work processes of the underlying SAP NetWeaver ABAP application server. Each job occupies 1 background work process in the SAP LT Replication Server system. For each configuration, the parameter Data Transfer Jobs restricts the maximum number of data load job for each mass transfer ID (MT_ID). In total, a mass transfer ID (MT_ID) requires at least 4 background jobs to be available:
One monitoring job (master job)
One master controller job
At least one data load job
One additional job either for the migration objects definition, access plan calculation or to change configuration settings in the Configuration & Monitoring Dashboard
Example
If you set the parameter Data Transfer Jobs to 04 in a configuration “SCHEMA1”, a mass transfer ID 001 is assigned. As a result, the following jobs should be in the system:
1 Master controller job: /1LT/IUC_REP_CNTR_001
At most 4 parallel jobs for MT_ID 001: /1LT/IUC_LOAD_MT_001_001/~002/~003/~004
When configuring your data load or replication scenario, consider the following:
Do not define more data transfer jobs than the number of available application server background work processes. If all available background work processes are already occupied by jobs, any other job will have to wait until a free work process becomes available. This can lead to long wait times until a new activity (for example creating triggers) can start, and can also result in significantly increased latency times for data replication.
The number of dialog work processes in the source system corresponds 1:1 with the number of data transfer jobs in the SAP LT Replication Server system.
Besides the work processes allocated by the data transfer jobs you need to provide additional available work processes for controller and monitoring jobs, the migration objects definition, access plan calculation or to perform configuration changes, and so on.
Sizing for SAP LT Replication Server involves determining how many work processes are required to perform the initial load of data into the target system within an acceptable timeframe, and accomplish the change capturing and the transfer of data changes to the target system within expected latency times.
Ensure that you add enough additional work processes to allow other required SAP LT Replication Server jobs to run.
Finally, you map the number of required application server work processes to their system resource consumption (CPU, memory, disc space) using the formulas provided by the SLT Sizing Guide.
With the simple formula below, you can calculate the number of required application server work processes (WPs) on the SLT Server for each active SLT configuration.
The number of required work processes can be determined by adding
The Number of required data transfer jobs ,
plus one background work process for Central Master (Monitoring) Job (only one per system!),
plus one background work process for Master Controller Job,
plus 3-5 additional empty background work processes (recommended per configuration),
plus approx. 3 dialog work processes (recommended for each configuration).
Note: A lack of available free application server work processes can negatively affect the data load or data replication processes.
To summarize everything, the number of 'Data Transfer Jobs' must be set depending of the number of source tables, it is not the actual number of tables.
Assume that for my 100 tables I use 10 'Data Transfer Jobs' :
- The number of work processes on the SLT server would be 20. I took the simple formula of the documentation:
10 data transfer jobs ,
+ 1 background work process for Central Master (Monitoring) Job (only one per system!),
+ 1 background work process for Master Controller Job,
+ 5 additional empty background work processes (recommended per configuration),
+ 3 dialog work processes (recommended for each configuration).
- The number of dialog processes on the source server would be 10 ( equal to the number of 'Data Transfer Jobs')
Am I correct ?
Regards,
Christian -
Recebimento de Transferencia na Zona Franca - Erro M7050 Saldo nao nulo. Transacao MB0A
Pessoal,
Boa noite,
Estou com um problema e preciso da ajuda de vocês.
ERRO M7050 - Saldo não nulo: 28,04 - Debito: 28,08 Credito: 0,04
Quando realizo a entrada da transferência através da transação MB0A, ele executa esse erro. Quero acreditar que o SAP não esta considerando o valor da redução do ICMS que a Zona Franca possui, pois eh justamente o valor da redução na saída da mercadoria.
As notas 622370 e 790429 estão aplicadas no sistema, alem de ter a condition do ICMS de credito presumido da ZF marcado como D - Imposto de transferência na cadeia de contabilização.
Vocês sabem o que esta acontecendo?
Obrigado.Oi Renan & Hernandes
O que vcs tem na tabela J_1BCONDMAPV e J_1BTXCOND no que diz respeito a nota 790429?
Qual versão do erp que vcs estão?
Imagino que vcs já tenham olhado a nota.. 1826651 - STO: ICMS wrongly calculated for Full/Partial return from ZF
Abraço
Eduardo Chagas -
Program terminated error after entering sold to party no. in sales order
hello friends,
can any help me, i was doing the topic of user exit for pre-defined sold to party using v45a0002 in cmod and i wrote a program for include 'if sy-uname= 'sapuser'.
message e000(0) with ' you are not authorised to create so'
endif
while activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite error
after i tried create a order
program terminated error after entering sold to party no. in sales order
so i have deactivated the project created in cmod & deleted the project inspite i am getting the program terminated error
i am sending total error plz reply quickly urgent friends
Runtime Errors SYNTAX_ERROR
Date and Time 19.04.2008 17:51:58
ShrtText
Syntax error in program "SAPLXVVA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLVKMP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXVVA ", the following syntax error occurred
in the Include "ZXVVAU04 " in line 5:
"The last statement is not complete (period missing)."
Author and last person to change the Include are:
Author "SAPUSER "
Last changed by "SAPUSER "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXVVA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXVVA ", the following syntax error occurred:
"The last statement is not complete (period missing)."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "mtpl7"
Network address.......... "192.100.10.1"
Operating system......... "Windows NT"
Release.................. "5.1"
Hardware type............ "2x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "MTPL7"
Database type............ "ORACLE"
Database name............ "ERP"
Database owner........... "SAPERP"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 8362368
Heap..................... 0
Page..................... 122880
MM Used.................. 4229224
MM Free.................. 995472
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "SAPUSER"
Language key........ "E"
Transaction......... "VA01 "
Program............. "SAPLVKMP"
Screen.............. "SAPMV45A 4701"
Screen line......... 16
Information on where terminated
The termination occurred in the ABAP program "SAPLVKMP" in
"SD_DETERMINE_KKBER".
The main program was "SAPMV45A ".
The termination occurred in line 0 of the source code of the (Include)
program " "
of the source code of program " " (when calling the editor 00).
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
4
SY-LSIND
0
SY-PAGNO
1
SY-LINNO
8
SY-COLNO
1
SY-PFKEY
U
SY-UCOMM
SY-TITLE
Create Standard Order kb: Overview
SY-MSGTY
E
SY-MSGID
VP
SY-MSGNO
106
SY-MSGV1
BUS2032
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
13 FUNCTION SAPLVKMP LVKMPU41 91
SD_DETERMINE_KKBER
12 FUNCTION SAPLVKMP LVKMPU41 91
SD_DETERMINE_KKBER
11 FUNCTION SAPLV09B LV09BU30 148
SD_PCHECK_PAYER_IN_CREDITAREA
10 FUNCTION SAPLV09B LV09BU26 296
SD_PARTNER_EXECUTE_CHECKS
9 FUNCTION SAPLV09B LV09BU25 57
SD_PARTNER_CHECK_BEFORE
8 FUNCTION SAPLV09A LV09AU26 342
SD_PARTNER_SINGLE_MODIFY
7 FORM SAPLV09A LV09AF39 176
PARTNER_SELECTION
6 FUNCTION SAPLV09A LV09AU29 820
SD_PARTNER_DETERMINATION
5 FUNCTION SAPLV05E LV05EU01 654
VIEW_KUAGV
4 FORM SAPMV45A MV45AF0K_KUAGV_SELECT 40
KUAGV_SELECT
3 FORM SAPMV45A MV45AF0A_AUFTRAGGEBER_PRUEFEN 46
AUFTRAGGEBER_PRUEFEN
2 FORM SAPMV45A MV45AF0K_KUNDEN_PRUEFEN 454
KUNDEN_PRUEFEN
1 MODULE (PAI) SAPMV45A MV45AI0K_KUNDEN_PRUEFEN 15
KUNDEN_PRUEFEN
Chosen variables
Name
Val.
No. 13 Ty. FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000 000000000000000000000000 00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
FUNCTION=SD_PCHECK_PAYER_IN_CREDITAREADATA=LVT_CREDIT_XVBPA
Table reference: 275
TABH+ 0(20) = 70A2883B388BC43B0000000013010000CF060000
TABH+ 20(20) = 020000001E020000FFFFFFFF04910100D82F0000
TABH+ 40( 8) = 02000000C1248400
store = 0x70A2883B
ext1 = 0x388BC43B
shmId = 0 (0x00000000)
id = 275 (0x13010000)
label = 1743 (0xCF060000)
fill = 2 (0x02000000)
leng = 542 (0x1E020000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000209
occu = 2 (0x02000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x28C1883B
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 2 (0x02000000)
lineAlloc = 2 (0x02000000)
store_id = 690 (0xB2020000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x28A4883B
>>>>> 2nd level extension part <<<<<
tabhBack = 0x109C883B
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
I_KKBER
2222
0000
FCODE_KOMM_LIEF_MENGE_SICH
MOD2
44432222222222222222
DF420000000000000000
SYST-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
%_SPACE
2
0
FCODE_KONFIGURATION1
POKO
54442222222222222222
0FBF0000000000000000
CREDIT_CHECK
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
SY-REPID
SAPLVKMP
5454544522222222222222222222222222222222
310C6BD000000000000000000000000000000000
SAV_BUKRS
SS00
5533
3300
CHAR_
2
0
%_DUMMY$$
2222
0000
AUTOMO_VOLVO
08
33
08
SPACE
2
0
FCODE_ABRUF_GENERIEREN
PABG
54442222222222222222
01270000000000000000
XVBRK
00000000 0000000
2222222222222222222222222222222222222222222222223333333322222222223333333222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
KOPGR_LIEFERPLAN
LL
4422
CC00
FCODE_ZUSAETZE_FAB
PFZU
54552222222222222222
06A50000000000000000
FCODE_REPARATUR
PREP
55452222222222222222
02500000000000000000
XVBKD
000000 #####0000000000 ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
FCODE_GEFAHRGUT
KGGP
44452222222222222222
B7700000000000000000
I_KKBER_HELP
2222
0000
T001
800SS00SRIYA TEXTILES HYDERABAD IN INR EINT 10K41 0000050495DE1
3335533554542545544452222222222245445444422222222222222224424452244452334332222223333333333443
800330032991045849C530000000000089452121400000000000000009E09E20059E4010B410000000000050495451
FCODE_STOFFBERICHTE
IEHS
44452222222222222222
95830000000000000000
T001-BUKRS
SS00
5533
3300
No. 12 Ty. FUNCTION
Name SD_DETERMINE_KKBER
I_KKBER_KNVV
2222
0000
I_KKBER_T001
8888
3333
8888
I_KKBER_TVTA
2222
0000
I_KUNNR
7000000000
3333333333
7000000000
I_SPART
SM
54
3D
I_VKORG
T000
5333
4000
I_VTWEG
S4
53
34
XVBAK
00000000000000 000000000000000000000000 00000000
2222222222222333333333333332222222222223333333333333333333333332222222223333333322222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
E_KNVV_FLG
2
0
RC
0
0000
0000
XVBKD[]
Table[initial]
XVBPA[]
Table IT_1743[2x542]
I_KKBER
2222
0000
XVBKD
000000 #####0000000000 ####
2222222222222333333222222222222222222222222222222222222222222222222200000333333333322222220000
000000000000000000000000000000000000000000000000000000000000000000000000C000000000000000000000
I_KKBER_HELP
2222
0000
No. 11 Ty. FUNCTION
Name SD_PCHECK_PAYER_IN_CREDITAREA
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_CHECKTYPE
I
4
9
FIF_MSGTYPE
E
4
5
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_KKBER2
2222
0000
LVF_KUNNR
7000000000
3333333333
7000000000
SYST-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
LVF_KURGV2
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
FIS_SDORGDATA-SPART
SM
54
3D
FIS_SDORGDATA-VKORG
T000
5333
4000
FIS_SDORGDATA-VTWEG
S4
53
34
%_O_SD_PARTNER_CONTEXT-HEX_0004
1
0
LVT_CREDIT_XVBPA
Table IT_1743[2x542]
LVF_KKBER1
2222
0000
GCS_HERTAB
ABCDEFG
24444444
01234567
%_DUMMY$$
2222
0000
SY-SUBRC
0
0000
0000
LVF_BEFORE_PARVW
2222
0000
No. 10 Ty. FUNCTION
Name SD_PARTNER_EXECUTE_CHECKS
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_MSGTYPE_TO_EXEC
E
4222
5000
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LVF_ALL_PREDECESSORS_SUCCEEDED
X
5
8
FALSE
2
0
GS_MARKED_PARTNERS
222222222222
000000000000
LVT_CHECKCALLSTACK
Table IT_1515[21x52]
FUNCTION=SD_PARTNER_EXECUTE_CHECKSDATA=LVT_CHECKCALLSTACK
Table reference: 219
TABH+ 0(20) = E8C3863B0000000000000000DB000000EB050000
TABH+ 20(20) = 1500000034000000F00000000491010058090000
TABH+ 40( 8) = 15000000C1248000
store = 0xE8C3863B
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 219 (0xDB000000)
label = 1515 (0xEB050000)
fill = 21 (0x15000000)
leng = 52 (0x34000000)
loop = 240 (0xF0000000)
xtyp = TYPE#000033
occu = 21 (0x15000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x90BF863B
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 21 (0x15000000)
lineAlloc = 21 (0x15000000)
store_id = 595 (0x53020000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
LVS_CHECKCALLSTACK_WA
80000018BUS2030 SD_PCHECK_PAYER_IN_CREDITAREA XX
3333333345533332225455444445545455445454445454422255
80000018253203000034F03853BF01952F9EF325494125100088
GT_MARKED_FOR_DEL_PARTNERS
Table[initial]
LVS_CHECKCALLSTACK_WA-FUNCNAME
SD_PCHECK_PAYER_IN_CREDITAREA
545544444554545544545444545442
34F03853BF01952F9EF32549412510
GC_NO_ACTION
2
0
GC_NEW_PARTNER
I
4
9
GVC_PARTNER_CONTEXT
CONTEXT_X_SD_PARTNER_CONTEXT fò####################################################
44454555555455455445544454552222222222226F0000000000000000000000000000000000000000000000000000
3FE4584F8F34F0124E52F3FE4584000000000000620000000000000000000000000000000000000000000000000000
GC_ERROR
E
4
5
GC_PROCESSMODE_DIALOG
D
4
4
LVF_MSGTYP
E
4
5
BUFFER_FULL_FILLED
F
4
6
POS_NUL
000000
333333
000000
BUFFER_PARTITIAL_FILLED
P
5
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES
0001000200030004000500060007000800090010001100120013NONE
33333333333333333333333333333333333333333333333333334444
0001000200030004000500060007000800090010001100120013EFE5
GCS_PARTNER_TYPE
KUAPLIPE
45454454
B510C905
LVF_RTYPE
0003
3333
0003
GCS_PARTNER_CALL_BACK_EVENTS
CHANGE DELETE NEW
444444222244445422224452222222
381E75000045C5450000E570000000
%_PRINT
000 0 ##
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCF_INITIAL_PARTNER
0
32
00
GCF_CALLER_TRANSPORT
T
5
4
TPACHECKRELATION
0000000000
2223333333333
0000000000000
GC_APPL_LOG
SDBFPD
54445422222222222222
34260400000000000000
SY-REPID
SAPLV09B
5454533422222222222222222222222222222222
310C609200000000000000000000000000000000
GVC_PARTNER_CONTEXT-B0007-PARVW
RG
54
27
No. 9 Ty. FUNCTION
Name SD_PARTNER_CHECK_BEFORE
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BEFORE
2
0
FIF_CHECKTYPE
I
4
9
FIF_DIALOG
2
0
FIF_NRART
KU
45
B5
FIF_PARGR
TA
5422
4100
FIF_PARNR
7000000000
3333333333
7000000000
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_RTYPE
0003
3333
0003
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FRF_MESSAGES
0
0000
0000
FRF_MESSAGE_COUNT
0
0000
0000
LS_STATISTICS
########################4 ################
00000000000000000000000032220000000000000000
00000000000000000000000040000000000000000000
No. 8 Ty. FUNCTION
Name SD_PARTNER_SINGLE_MODIFY
FIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
FIC_OBJECTTYPE
BUS2032
4553333222
2532032000
FIF_BOKRE
2
0
FIF_CLEAR_APPL_LOG
X
5
8
FIF_DIALOG
2
0
FIF_HARD_DELETION
2
0
FIF_HISTUNR
00
33
00
FIF_HZUOR
00
33
00
FIF_INITIAL_VALUE
X
5
8
FIF_KNREF_PARNR
2222222222
0000000000
FIF_KUNNR_NEW
7000000000
3333333333
7000000000
FIF_KUNNR_OLD
2222222222
0000000000
FIF_LISTPROCESSING
2
0
FIF_MANUAL_ADDRESS
2222222222
0000000000
FIF_MANUAL_ADDRESS_ORIGIN
2
0
FIF_NO_CPD_DIALOG
2
0
FIF_NO_DIALOG
2
0
FIF_NO_MESSAGES
2
0
FIF_PARGR
TA
5422
4100
FIF_PARTIAL_NEW_DETERMINATION
2
0
FIF_PARVW
RG
5422
2700
FIF_POSNR
000000
333333
000000
FIF_PRFRE
2
0
FIF_VKORG
2222
0000
FIS_SDORGDATA
T000S4SMZSOR
533353545545222222
4000343DA3F2000000
FEV_ACTION_DONE
I
4
9
FRF_LOG_COUNT
0
0000
0000
SYST-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
GVT_LOCAL_CALL_BACK_MEMORY[]
Table[initial]
%_SPACE
2
0
SY-REPID
SAPLV09A
5454533422222222222222222222222222222222
310C609100000000000000000000000000000000
LVF_ACTION_TODO
I
4
9
GC_UPD_PARTNER
U
5
5
%_VIASELSCR
0
4
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
GCS_PARTNER_ROLETYPES-SHIP_TO
0002
3333
0002
LVF_NRART
KU
45
B5
LVF_KUNNR_NEW
7000000000
3333333333
7000000000
GCS_ADDRESS_GROUP
SD01CA01
54334433
34013101
GCF_APPL_TABLE_SD
VBUK
5454222222
625B000000
LVF_ROLETYPE
0003
3333
0003
RSJOBINFO
00000000000000 ####
222222222222222222222222222222223333333333333322222222222222222222222222222222220000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LVF_MESSAGE_COUNT
0
0000
0000
%_DUMMY$$
2222
0000
GCF_ADDRESS_TYPE_CONT_PERSON
3
3
3
No. 7 Ty. FORM
Name PARTNER_SELECTION
TVTA
000
222222222222222222222222222222222333222222222222222
000000000000000000000000000000000000000000000000000
TPAER
00
22222222222222332222
00000000000000000000
LVS_XVBPA
000000RG7000000000 0000000000000000000000050510
2222222222222333333543333333333222222222233333333333333333333333333332222222222222222222222222
0000000000000000000277000000000000000000000000000000000000000000505100000000000000000000000000
LVF_PARNR
7000000000
3333333333
7000000000
PIC_OBJECTKEY
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
PIC_OBJECTTYPE
BUS2032
4553333222
2532032000
PIF_NO_DIALOG
2
0
PIF_PARGR
TA
5422
4100
LVF_PARVW
RG
5422
2700
PIF_POSNRHi Kartik,
Could you please be more clearer as to how do you want me to proceed so that this syntax error stops bothering me while creating a standard order thru TCode VA01.Also what do you mean by "well comment the code in the include and activate the include"
I created a projet in CMOD and than added the enhancement V45A0002.The components shown as EXIT_SAPMV45A_002(Predefined sold to party when making the standard order),i double click on the exit and entered into the function module.After that i double clicked on the include ZXVVZU04 and entered in and wrote E_KUNNR=100171
While activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite the error .After that i tried to create a order and program terminated error came after entering sold to party no. in sales order
so now i have deactivated the project which i created in CMOD & deleted the project also inspite of this i am getting the program terminated error while making the order
I would be great ful if somebody helps me *** out of this syntax error.
Thanks
Rishi -
hi
I'm installing the EHP4 on an ERP 6.0 System and get the following error:
Checks after phase MAIN_SHDRUN/ACT_UPG were negative!
Last error code set: Unresolved requests in buffer EH4 Check logfiles 'ACTUPG.ELG' and 'C:\usr\sap\EH4\upg\abap\log\SAPehpi.ECO'
Here is a part of SAPEhpi.EH4:
SAPehpi> Starting subprocess tp.exe with id 5208 at 20090727150713
EXECUTING C:\usr\sap\EH4\upg\abap\exe\tp.exe pf=C:\usr\sap\EH4\upg\abap\bin\ACTUPG.TPP put EH4
Environment: JAVA_HOME=C:\j2sdk1.4.2_16-x64
Environment: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
Environment: Path=C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\j2sdk1.4.2_16-x64\bin;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\usr\sap\EH4\DVEBMGS00\exe
Environment: dbs_mss_schema=eh4
This is C:\usr\sap\EH4\upg\abap\exe\tp.exe version 372.04.65 (release 701, unicode enabled)
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Warning: Parameter INTERRUPT is no longer used.
Warning: Parameter DAYLIGHT_SHUTDOWN is no longer used.
Warning: Parameter WITH_TACOB is no longer used.
Warning: Parameter IMPDP_BY_EVENT is no longer used.
Looking for effective putsteps ... ... ready (looking for putsteps)
stopping on error 12 during DD ACTIVATION
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 12
meaning:
A tool used by tp aborted
ERROR: stopping on error 12 during DD ACTIVATION
Process with ID 17820 terminated with status 12
Part of ACTUPG.EH4:
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-40401INEAIPPE.EH4
1 ETP111 exit code : "12"
DDIC ACTIVATION ERRORS and RETURN CODE in SAPA-603DDINEAAPPL.EH4
1 ETP111 exit code : "12"
I applied the note 1306559 but it didn't help.
someone has an idea?
thank younow i got some data from the shadow instance
JOB:
RDDMASGL DDIC Canceled
JOB LOG:
Job started
Step 001 started (program RDDMASGL, variant IMPACTMRG, user ID DDIC)
Start of mass activation 10:37:39
ABAP/4 processor: TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Job cancelled
Runtime Error Short Text
No roll storage space of length 638992 available for internal storage.
Error Analysis
Error analysis
The internal table "\FUNCTION=DD_MASS_ACT_C3\DATA=DEPTAB" could not be enlarged
further.
Memory location: "Session memory"
You attempted to extend the data structure for the management of the
memory blocks for table "\FUNCTION=DD_MASS_ACT_C3\DATA=DEPTAB". However, the
638992 bytes required for
this were no longer available in the specified memory area.
The amount of memory requested is no longer available.
should i also apply the note 1306559 in the shadow instance?
thx
Edited by: Joachim Knittl on Jul 29, 2009 3:30 PM -
Replacement for QSIMG, AU015 and XEDT in payroll schema Q000 in ERP 6.0
Hi SAP Gurus,
I am involved in SAP HR upgrade from R/3 4.6c to ERP 6.0 for country AU.
Now, there are three functions - namely QSIMG, AU015 & XEDT - that have become obsolete in payroll schema Q000 in ERP 6.0. Can anyone please let me know what are the replacements for these functions in payroll schema Q000 in ERP 6.0.
How is SAP handling the functionalities of these functions - QSIMG, AU015, XEDT in payroll schema Q000 in ERP 6.0
Any pointers in this regard will be highly appreciated.
Regards,
VivekI`d say contact SAP . I did check following OSS notes , but no-luck !
FYI
1. 0.760 PY-AU 1003724 IT0014 wagetype processed differently in QSIMG and P0014 13.12.2006
2. 0.400 PY-AU 931854 Termination Payment incorrect because of Infotype 14 15.03.2006
3. 0.290 PY-AU 626989 Taxation on Lump Sum Payments as Arrears 27.04.2004
4. 0.570 PY-AU 369575 Termination using delimited infotype 14 records 09.07.2001
5. 0.340 PY-AU 210623 PY-AU: Bonus combined with Adv Pays causing problems 04.07.2000
6. 0.470 PY-AU 208953 PY-AU: WPBPC not working in termination simulation -
TREX- process is terminating, because lockfile
Hi experts,
We recently implemented TREX to ease our search functionality within our ERP environment. Now its only implemented for DMS- document search within PLM. We almost done with the initial indexing, but stucked at last bit with error in trace file as below:
self_watchdo SelfWatchdog.cpp(00170) : process is terminating, because lockfile 'I:\usr\sap\TP9\TRX01\hcb-msap63\lock\TREXIndexServer..30103.pid' is missing/wrong.
Do you have any clue why this happened? We already restarted the server but the problem still persists.
Thanks.
Regards,
ThavaHi Duncan,
I tried what you advised, stop the trex services. Then deleted TREXIndexServer_30103.pid from lock directory. Yet the indexing is not progressing, index failed with 200k documents and at the trace file same error Im getting
"2011-07-07 07:08:16.326 f self_watchdo SelfWatchdog.cpp(00170) : process is terminating, because lockfile 'I:\usr\sap\TP9\TRX01\hcb-msap63\lock\TREXIndexServer_30103.pid' is missing/wrong".
What can I do now?
Thanks.
Regards,
Thava -
PMON terminating instance due to error 472
Hello
i have a database that was has crashed with the following errors :
oing block recovery for file 74 block 84379
Block recovery from logseq 51144, block 137 to scn 27771463134
Fri Apr 29 18:48:24 2011
Recovery of Online Redo Log: Thread 1 Group 2 Seq 51144 Reading mem 0
Mem# 0 errs 0: /erp01/app/oracle/oradata/erp/redo02.log
Mem# 1 errs 0: /erp01/app/oracle/oradata/erp/redo02b.log
Block recovery completed at rba 51144.140.16, scn 6.2001659361
Fri Apr 29 18:49:22 2011
Errors in file /erp01/app/oracle/admin/erp/bdump/erp_pmon_5581.trc:
ORA-00600: internal error code, arguments: [4193], [388], [407], [], [], [], [], []
Fri Apr 29 18:49:22 2011
Errors in file /erp01/app/oracle/admin/erp/bdump/erp_pmon_5581.trc:
ORA-00600: internal error code, arguments: [4193], [388], [407], [], [], [], [], []
Fri Apr 29 18:49:22 2011
PMON: terminating instance due to error 472
Instance terminated by PMON, pid = 5581
This database had earlier on been affected by abrupt power shutdown.
It was going on and off. But now its not opening and its showing the error above.
Operating system = Solaris 10
Database version = Release 10.2.0.2.0
Please helpORA-00600/ORA-07445/ORA-03113 = Oracle bug => search on Metalink and/or call Oracle support
-
ASMB: terminating instance due to error 15064
ASMB: terminating instance due to error 15064
Database is shutdown and alert file show following messages.
ORA-15064: communication failure with ASM instance
ORA-03135: connection lost contact
Tue Apr 15 16:11:14 2014
ASMB: terminating instance due to error 15064
Termination issued to instance processes. Waiting for the processes to exit
Tue Apr 15 16:11:24 2014
Instance termination failed to kill one or more processes
Instance terminated by ASMB, pid = 2884110
Tue Apr 15 16:15:19 2014
Below is the output of trace file erp_asmb_2884110.trc:
more /u01/app/oracle/admin/erp/bdump/erp_asmb_2884110.trc
/u01/app/oracle/admin/erp/bdump/erp_asmb_2884110.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/10.2.0/db_1
System name: AIX
Node name: erpnew
Release: 1
Version: 6
Machine: 00C5CAD44C00
Instance name: erp
Redo thread mounted by this instance: 1
Oracle process number: 28
Unix process pid: 2884110, image: oracle@erpnew (ASMB)
*** 2014-04-15 16:11:14.003
*** SERVICE NAME:(SYS$BACKGROUND) 2014-04-15 16:11:13.353
*** SESSION ID:(1959.1) 2014-04-15 16:11:13.353
error 15064 detected in background process
ORA-15064: communication failure with ASM instance
ORA-03135: connection lost contact
*** 2014-04-15 16:11:24.600
Instance termination failed to kill one or more processes
ksuitm_check: OS PID=7079012 is still alive
*** 2014-04-15 16:11:24.601
Dumping diagnostic information for oracle@erpnew:
OS pid = 7079012
loadavg : 23.36 9.55 8.59
swap info: free_mem = 113237.14M rsv = 1260.00M
alloc = 34190.07M avail = 322560.00M swap_free = 288369.93M
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD
ERROR: process 7079012 is not aliveHi ,
Database can get crashed with ORA-15064 due to following things ,
+ OS level resource starvation
Or
+ Oracle defect .
So,without proper information it will be hard to conclude.
I would suggest you to open a service request with support with below information ,
-- ASM and RDBMS alertlog file
-- If ASM instance crash ,then gather diagcollection information from cluster level with the help of TFA ,covering atleast 4 hours +/- of the issue
-- generated trace files from rdbms and ASM level ,particularly diag trace file if generated.
-- Patch details of this impacted environment .
Regards,
Aritra -
Database online backup issue after ERP 6.0 EHP4 update
Dear Folks!...
I have an issue with ERP 6.0 system with database oracle.
After performing EHP4 update unable to trigger online backup.
Shows bellow error message:
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.10
BR0301E SQL error -1031 at location BrSapTspList-8, SQL statement:
'PREPARE stmt_1 STATEMENT FROM'
'SELECT TABSPACE FROM "SAPSR3".TSORA UNION SELECT INDSPACE FROM "SAPSR3".TSORA ORDER BY 1'
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.10
BR0307I Shutting down database instance RES ...
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.17
BR0308I Shutdown of database instance RES successful
BR0056I End of database backup: beazhkrz.afd 2009-07-10 14.53.10
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.17
BR0054I BRBACKUP terminated with errors
At SAP level check with table TSORA shows current existing tablespaces.And from DB13 able to perform DB actions except backup related.
Could any one suggest to help me to fix the issue.
Thanks in Advance.
Regards,
Venkata.Dear presu
It has been installed on Windows OS 64 bit AMD processor.And related to permissions of the folder was given completely.
Complete log Message:
BR0051I BRBACKUP 7.00 (39) BR0055I Start of database backup: beazhkrz.afd 2009-07-10 14.52.43
BR0484I BRBACKUP log file: G:\oracle\RES\sapbackup\beazhkrz.afd
BR0477I Oracle pfile G:\oracle\RES\102\database\initRES.ora created from spfile G:\oracle\RES\102\database\spfileRES.ora
BR0613I Database instance RES is shut down BR0329I Database instance RES will be opened now BR0280I BRBACKUP time stamp: 2009-07-10 14.52.45 BR0256I Enter 'c[ont]' to continue, 's[top]' to cancel BRBACKUP: BR0280I BRBACKUP time stamp: 2009-07-10 14.52.49 BR0257I Your reply: 'c' BR0259I Program execution will be continued...
BR0280I BRBACKUP time stamp: 2009-07-10 14.52.49 BR0304I Starting and opening database instance RES ...
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.01 BR0305I Start and open of database instance RES successful
BR0101I Parameters
Name Value
oracle_sid RES
oracle_home G:\oracle\RES\102
oracle_profile G:\oracle\RES\102\database\initRES.ora
sapdata_home G:\oracle\RES
sap_profile G:\oracle\RES\102\database\initRES.sap
backup_mode ALL
backup_type offline
backup_dev_type disk
backup_root_dir Y:\Backup
compress no
disk_copy_cmd copy
cpio_disk_flags -pdcu
exec_parallel 0
system_info resadm RCIHWRES13V Windows 5.2 Build 3790 Service Pack 2 AMD64
oracle_info RES 10.2.0.4.0 8192 8188 87296881 RCIHWRES13V UTF8 UTF8
sap_info 701 SAPSR3 RES TEMPLICENSE R3_ORA INITIAL
make_info NTAMD64 OCI_10201_SHARE Dec 7 2008
command_line G:\usr\sap\RES\DVEBMGS13\exe\brbackup.exe -p initRES.sap -d disk -t offline -m all -k no -e 0 -l E -U
BR0116I ARCHIVE LOG LIST before backup for database instance RES
Parameter Value
Database log mode No Archive Mode
Automatic archival Disabled
Archive destination M:\oracle\RES\oraarch\RESarch
Archive format ARC%S_%R.%T
Oldest online log sequence 8185
Next log sequence to archive 8188
Current log sequence 8188 SCN: 87296881
Database block size 8192 Thread: 1
Current system change number 87304439 ResetId: 689356796
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3_1\SR3.DATA1 2222989312 4 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_21\SR3.DATA21 2097160192 48 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_22\SR3.DATA22 2097160192 49 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_23\SR3.DATA23 2097160192 50 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_24\SR3.DATA24 2097160192 58 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_25\SR3.DATA25 2097160192 59 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_26\SR3.DATA26 2097160192 60 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_27\SR3.DATA27 2097160192 61 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_28\SR3.DATA28 2097160192 62 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_29\SR3.DATA29 2097160192 63 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3_2\SR3.DATA2 2243960832 5 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3_30\SR3.DATA30 2097160192 64 7 NOLINK FILE 0 0 8192
PSAPSR3 ONLINE* ONLINE+ I:\ORACLE\RES\SAPDATA2\SR3_8\SR3.DATA8 2139103232 11 8 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ I:\ORACLE\RES\SAPDATA2\SR3_9\SR3.DATA9 2432704512 12 8 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ J:\ORACLE\RES\SAPDATA3\SR3_11\SR3.DATA11 2264932352 14 9 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3_18\SR3.DATA18 2181046272 21 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3_19\SR3.DATA19 2181046272 22 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3_20\SR3.DATA20 2202017792 23 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE+ ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3700_1\SR3700.DATA1 2705334272 24 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE+ ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3700_2\SR3700.DATA2 2705334272 25 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE+ ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3700_3\SR3700.DATA3 2747277312 26 7 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE+ ONLINE I:\ORACLE\RES\SAPDATA2\SR3700_20\SR3700.DATA20 2147491840 54 8 NOLINK FILE 0 0 8192
PSAPSR3700 ONLINE+ ONLINE J:\ORACLE\RES\SAPDATA3\SR3700_21\SR3700.DATA21 2147491840 55 9 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3701_11\SR3701.DATA11 2097160192 72 7 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE H:\ORACLE\RES\SAPDATA1\SR3701_12\SR3701.DATA12 2097160192 73 7 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_10\SR3701.DATA10 2097160192 71 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_5\SR3701.DATA5 2097160192 66 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_6\SR3701.DATA6 2097160192 67 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_7\SR3701.DATA7 2097160192 68 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_8\SR3701.DATA8 2097160192 69 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE I:\ORACLE\RES\SAPDATA2\SR3701_9\SR3701.DATA9 2097160192 70 8 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE K:\ORACLE\RES\SAPDATA4\SR3701_1\SR3701.DATA1 20971528192 44 10 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE L:\ORACLE\RES\SAPDATA5\SR3701_2\SR3701.DATA2 20971528192 45 11 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE L:\ORACLE\RES\SAPDATA5\SR3701_3\SR3701.DATA3 20971528192 46 11 NOLINK FILE 0 0 8192
PSAPSR3701 ONLINE* ONLINE L:\ORACLE\RES\SAPDATA5\SR3701_4\SR3701.DATA4 10485768192 47 11 NOLINK FILE 0 0 8192
PSAPSR3DB ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3DB_1\SR3DB.DATA1 2097160192 41 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3DB_2\SR3DB.DATA2 2097160192 42 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ K:\ORACLE\RES\SAPDATA4\SR3DB_3\SR3DB.DATA3 1048584192 43 10 NOLINK FILE 10485760000 20971520 8192
PSAPSR3USR ONLINE* ONLINE+ H:\ORACLE\RES\SAPDATA1\SR3USR_1\SR3USR.DATA1 20979712 40 7 NOLINK FILE 10485760000 20971520 8192
PSAPTEMP ONLINE# ONLINE+ I:\ORACLE\RES\SAPDATA2\TEMP_1\TEMP.DATA1 2097160192 -1 8 NOLINK FILE 10485760000 20971520 8192
PSAPUNDO ONLINE- ONLINE+ J:\ORACLE\RES\SAPDATA3\UNDO_1\UNDO.DATA1 8766103552 2 9 NOLINK FILE 10485760000 20971520 8192
SYSAUX ONLINE* ONLINE+ H:\ORACLE\RES\SAPDATA1\SYSAUX_1\SYSAUX.DATA1 251666432 3 7 NOLINK FILE 10485760000 20971520 8192
SYSTEM ONLINE* SYSTEM+ H:\ORACLE\RES\SAPDATA1\SYSTEM_1\SYSTEM.DATA1 1073750016 1 7 NOLINK FILE 10485760000 20971520 8192
BR0119I Redo log files
File Size Group Device Status Link Type
F:\ORACLE\RES\MIRRLOGA\LOG_G11M2.DBF 52429312 1 5 INUSE NOLINK FILE
E:\ORACLE\RES\ORIGLOGA\LOG_G11M1.DBF 52429312 1 4 INUSE NOLINK FILE
F:\ORACLE\RES\MIRRLOGB\LOG_G12M2.DBF 52429312 2 5 INUSE NOLINK FILE
E:\ORACLE\RES\ORIGLOGB\LOG_G12M1.DBF 52429312 2 4 INUSE NOLINK FILE
F:\ORACLE\RES\MIRRLOGA\LOG_G13M2.DBF 52429312 3 5 INUSE NOLINK FILE
E:\ORACLE\RES\ORIGLOGA\LOG_G13M1.DBF 52429312 3 4 INUSE NOLINK FILE
F:\ORACLE\RES\MIRRLOGB\LOG_G14M2.DBF 52429312 4 5 INUSE NOLINK FILE
E:\ORACLE\RES\ORIGLOGB\LOG_G14M1.DBF 52429312 4 4 INUSE NOLINK FILE
BR0120I Control files
File Size Id. Device Link Type
E:\oracle\RES\origlogA\cntrl\cntrlRES.dbf 14106624 0 4 NOLINK FILE
E:\oracle\RES\origlogB\cntrl\cntrlRES.dbf 14106624 0 4 NOLINK FILE
G:\oracle\RES\sapdata1\cntrl\cntrlRES.dbf 14106624 0 6 NOLINK FILE
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.10
BR0301E SQL error -1031 at location BrSapTspList-8, SQL statement:
'PREPARE stmt_1 STATEMENT FROM' 'SELECT TABSPACE FROM "SAPSR3".TSORA UNION SELECT INDSPACE FROM "SAPSR3".TSORA ORDER BY 1'
ORA-01031: insufficient privileges
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.10 BR0307I Shutting down database instance RES ...
BR0280I BRBACKUP time stamp: 2009-07-10 14.53.17 BR0308I Shutdown of database instance RES successful
BR0056I End of database backup: beazhkrz.afd 2009-07-10 14.53.10 BR0280I BRBACKUP time stamp: 2009-07-10 14.53.17
BR0054I BRBACKUP terminated with errors
Regards,
Venkata. -
ERP Purchase order not flowing to SNC
Hello experts,
I created few purchase orders in ERP but those are not reflected in SNC system. I checked XML and the error is "Ship-from location missing".
Kindly help.
Regards,
Gulshan
Edited by: Gulshan Yadav on Nov 18, 2011 10:19 AMHi Nikhil,
Please see the XML details below:
- <nm:PurchaseOrderERPReplenishmentOrderCollaborationNotificationFault xmlns:nm="http://sap.com/xi/SAPGlobal20/Global" xmlns:prx="urn:sap.com:proxy:Q2T:/1SAI/TAS918AF467E038C7C2B5E3:731">
- <standard>
<faultText>Proxy Class (generated)</faultText>
- <faultDetail>
<severity>information</severity>
<text>Start of inbound processing: PurchOrdERPReplOrderNotification (ID A768C74EBAF69356E10000000A4286C9)</text>
<id>300(/SCA/BIF_ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Starting process type and party role determination</text>
<id>133(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Process type could not be determined; search for default process type</text>
<id>131(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Default process type (ICH) determined successfully</text>
<id>013(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Starting logical partner role determination</text>
<id>064(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Logical partner role is 'Sold-To Party'</text>
<id>063(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Logical partner role determination has been completed successfully</text>
<id>061(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Process type and party role determination completed successfully</text>
<id>134(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Starting address action determination</text>
<id>070(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>No Customizing found; standard action is 'map all addresses'</text>
<id>072(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>End of address action determination</text>
<id>071(/SCA/BIF_CU)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Order 4500000424: CreationUserAccountID is provided but ignored by SNC</text>
<id>050(/SCA/BIF_ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Order 4500000424: CompletenessAndValidationStatusCode is provided but ignored by SNC</text>
<id>053(/SCA/BIF_ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>The active implementation of BAdI '/SCA/BIF_MI_PRODID' 'BEFORE_MASTER_DATA_ACCESS' has been run</text>
<id>080(/SCA/BIF_COMMON)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>The active implementation of BAdI '/SCA/BIF_MI_ITMBPRT' 'BEFORE_MASTER_DATA_ACCESS' has been run</text>
<id>080(/SCA/BIF_COMMON)</id>
</faultDetail>
- <faultDetail>
<severity>warning</severity>
<text>Order 4500000424 item 00010: DeliveryPeriodEndDateTime is missing in schedule line 1</text>
<id>090(/SCA/BIF_ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>BOL processing started for Process Type 'ICH' Process Name 'REPLORDER'</text>
<id>000(/SCA/DM_BOL_CON)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Calling BOL Service Class '/SCA/CL_SVORDER'</text>
<id>012(/SCA/DM_BOL_CON)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Starting master data completion</text>
<id>000(/SCA/DM_MDCOMP)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Reading Customizing settings</text>
<id>003(/SCA/DM_MDCOMP)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Customizing profile SREPLORD has successfully been determined</text>
<id>004(/SCA/DM_MDCOMP)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>ShipFromLocation determination is switched off in Customizing</text>
<id>040(/SCA/DM_MDCOMP)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>End of master data completion</text>
<id>001(/SCA/DM_MDCOMP)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Start: read ODM order</text>
<id>250(/SCMB/ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>End: read ODM order</text>
<id>251(/SCMB/ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Start: validation framework</text>
<id>254(/SCMB/ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Validation started for validation profile POC1 (ICH - REPLORDER - HEADER)</text>
<id>606(/SCMB/DM_BOL)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Validation for validation profile POC1 (ICH - REPLORDER - HEADER) was successful</text>
<id>607(/SCMB/DM_BOL)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Validation started for validation profile POC1 (ICH - REPLORDER - ITEM)</text>
<id>606(/SCMB/DM_BOL)</id>
</faultDetail>
- <faultDetail>
<severity>warning</severity>
<text>Order 4500000424, item 00010: Could not assign ship-from location</text>
<id>068(/SCMB/ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>error</severity>
<text>Order 4500000424 item 00010: ship-from location missing</text>
<id>007(/SCMB/ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>warning</severity>
<text>Validation for val. prof. POC1 (ICH, REPLORDER, ITEM) ended with errors and warnings</text>
<id>608(/SCMB/DM_BOL)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>End: validation framework</text>
<id>255(/SCMB/ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>Start: write ODM order</text>
<id>252(/SCMB/ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>End: write ODM order</text>
<id>253(/SCMB/ORDER)</id>
</faultDetail>
- <faultDetail>
<severity>error</severity>
<text>BOL processing failed. XML-message inbound processing has been terminated</text>
<id>002(/SCA/DM_BOL_CON)</id>
</faultDetail>
- <faultDetail>
<severity>information</severity>
<text>End of inbound processing: ReplenishmentOrderNotif. for PO collaboration</text>
<id>034(/SCA/BIF_ORDER)</id>
</faultDetail>
</standard>
</nm:PurchaseOrderERPReplenishmentOrderCollaborationNotificationFault>
Thanks & Regards,
Gulshan -
RRI report transfer to ERP transaction VA03 problem
Hi all,
I have following problem when I tried to jump to VA03 transaction from Query Designer report.
I created sender/receiver assignment with following options
Sender : Query Designer report
Receiver : VA03 transaction
When i click on go to VA03 it's displaying error " Java communication error: Error when opening an RFC connection" after it's displaying below error.
Is it related to EP and R/3 connnection problem or else?
Error:
SAP Web Application Server window is displaying and asking for logon details.
The URL http://ttcsap04:8001/sap/bc/gui/sap/its/webgui was not called due to an error.
Note
The following error text was processed in the system TCQ : System error
The error occurred on the application server ttcsap04_TCQ_01 and in the work process 0 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLRSRR_WEB
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TCQ in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ttcsap04_TCQ_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ttcsap04_TCQ_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 500 -u: USER -l: E -s: TCQ -i: ttcsap04_TCQ_01 -w: 0 -d: 20090107 -t: 041216 -v: ABORT_MESSAGE_STATE -e: System error
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Thanks in Advance,
VenkyHi
You need to establish the connection between EP/ERP/BI-BEx.
More of a network / Basis/ EP Issue Raise a ticket with them for the help. -
Run time RFC communication error ERP ECO 7.0
Hi guys
We are using ECO 7.0 for ERP 6.0 and I can acess B2b site and take products into the basket without issues. But as soon as I click go to quotation, I get run time errors. Looking at the trace i found that issue is with jco exception at RFC_Error_CommunicationCPIC Call CRMRCV.
I then looked into ECC ST22 dump log and found that lots of dumps under user id sapsys for get crm release information. I am not sure why ECO is looking for CRM release when we dont have CRM in picture.
If you have encountered this issue, please let me know.
Regards
JaiFollowing is the dump that I see in our ECC system
Function module "CRM_GET_TRANSFER_STRUCT" not found.
What happened?
The function module "CRM_GET_TRANSFER_STRUCT" is called,
but cannot be found in the library.
Error in the ABAP Application Program
The current ABAP program "SAPMSSY1" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
ror analysis
The program "SAPMSSY1" contains the CALL FUNCTION statement.
The name of the function module to be called is "CRM_GET_TRANSFER_STRUCT".
No function module exists with the name "CRM_GET_TRANSFER_STRUCT".
All function modules are listed in the Function Library (SE37). -
HT4628 certain sites not working in france
i am in france. my wi-fi was working fine at my hotel. now when i navigate to certain sites (like facebook) it kicks me to a yahoo home page. other sites (like my gmail acct) work fine. ***? thanks.
Probably nothing to do with your computer, but you could try flushing the DNS cache to see if that helps:
1. Quit Safari.
2. Open Terminal (Applications > Utilities > Terminal.app) and paste
dscacheutil -flushcache
then press 'return'.
3. Open Safari and test. -
Hello,
I am installing Enhancement Package 4 for SAP ERP 6.0 (Windows Server 2003 x64/Oracle) using EHPinstaller tool.
SAP ERP 6.0 is an existing system. When I started the EHPi tool, I got to know that there are 8 stages in the installation roadmap.
If anyone has done this before, could you please let me know how much time (days/hrs) does this entire process take (all the 8 stages) as I am stuck in the EXTRACTION stage (2nd stage) for more than 24 hrs now. The EHPi is running as I can see in the task manager (1 to 4% CPU Utilization with no users on the SAP system), but its taking lots of time.
I havent even entered the 'resource utilization strategy' yet, which is taken as a parameter in the 3rd stage of CONFIGURATION.
I have already done the PREPARATION steps in installation guide, but am unable to find the reason behind such a long running stage.
Also, on checking EHPi logs, no error is logged as yet.
Please let me know the how long should I wait before stopping/terminating the installation?
Regards,
Saurabh.> If anyone has done this before, could you please let me know how much time (days/hrs) does this entire process take (all the 8 stages) as I am stuck in the EXTRACTION stage (2nd stage) for more than 24 hrs now. The EHPi is running as I can see in the task manager (1 to 4% CPU Utilization with no users on the SAP system), but its taking lots of time.
This depends HEAVILY on your system speed. I have made EHP4 installations taking 2 days to 7 days.
24h for the extraction is very much, there seems to be a problem. I'd check the latest logs in EHPI\abap\log for possible issues. The extraction usually does nothing more than extracting all the SAR files to the correct places. This shouldn't take 24 h.
BTW: there's a special forum for EHP installations: /community [original link is broken]
Markus
Maybe you are looking for
-
hi, what would stop requisition lines from not be generated? they are for BTB items, our workaround at the moment is to create the po's manually
-
I can not open some pdf documents from goverment websites
i can not open some pdf documents from goverment websites
-
Hello, Since the last update 10.6.8, my MacBookPro mid 2010 randomly loses the connection with my wifi AppleTV2 2. It works well with the connection between myPC and filiaire AppleTV2 els and between my iPhone 2 (3G and 4) and AppleTV2 butpoorly betw
-
How can I display ToDo notes?
Mac Mail ToDo's have a notes field, but I can only get them to display in one small field on one line only. Is there a way to display the whole note? Or is there a way to display one ToDo in its own window?
-
Autovue desktop deployment installation on terminal.
Hi, We are trying to install Autovue desktop deployment installation on citrix - VDI solution. It seems like the installation installs files on the user that run the installation and when other users are trying to open autovue they are getting error