Termination  Process

Hi gurus
I have configured  Termination Action in IMG, can you  please tell me how to do the process in pa40 and pa30 for termination action and what are the activities that have to be performed
Regards
Raju

Appala,
I hope you are able to view the termination action in PA40 screen after the config. If not, check the country grouping & User group.
Also, follow the above mentioned steps.
SKR

Similar Messages

  • How to handle messages correlated to a terminated process

    In WLI 8.5, I have a process sending messages to a request queue (thanks to a WLI JMS control), and receiving message in a response queue (thanks to the same WLI JMS control).
    The external process performing the work, reads messages from the request queue and publishes correlated responses. Those correlated responses can trigger the right process. This part works fine.
    But if the response doesn’t arrive in due time, there is a timeout path, the process continues and terminates gracefully.
    If a correlated message arrives on a terminated process, I have ConversationNotFoundException in the console. I’d like to handle them in order to send a too late message to the sender.
    How should I proceed?
    I cannot catch the ConversationNotFoundException(s) in the terminated process.
    How can I catch them ?
    If I put an error queue to my response queue, I won’t be able to discriminate between ConversationNotFoundException and other delivery errors. What is the best practise to handle this case?

    We had a similar issue encountered and there were a few observations by BEA support on this exception that are generic I think, so this may help you:
    (Are you using a JMS Control as the explanation involves them and more importantly, a cluster!)
    There are some architectural implications of using a jms control in a cluster, where the message flow is bidirectional.
    The ConversationNotFoundException would in this case be a consequence of the fact that our automatic jms control machinery has lost track of the exact jpd instance that it is receiving a mesage from. This automatic machinery is that the jms correlation-id = the conversation-id= the jpd instanceid
    see http://e-docs.bea.com/workshop/docs81/doc/en/workshop/javadoc-tag/jc/jms.html, but in a cluster environment, it could be mix up and not work like that.
    So regarding your question if you can program a specific message to send when this error occurs, it looks difficult as it seems your JPD is now out of the picture and hence no logic would handle this scenario.
    Nevertheless, I will watch this space for other suggestions as a workaround.

  • ESS -Termination process

    Hello,
    I have question Is there any process available in Ess/MSS in version 6.0 for emplyee termination. i.e all clearance procedure should be taken through ESS/MSS.
    Thanks,
    Nydia

    I think you need to develop the custom process
    thanks

  • Accumulate output of Terminal process across Target Group

    I have a process (Workflow?) that I execute on a Target Group of terminal Targets.  I want to gather all the outputs of the Execute Terminal Commands into one place for processing.
    Concatenating it to an Output variable doesn't work.  Each Target has it's own, with only it's output.
    Even writing to a file doesn't work.  Eventually, two processes try to write at the same time and one fails. 
    Concatenating it to a Global Variable seems to work.  But it seems like there must be a better way.

    Currently CPO does not support running(or in this case broadcasting) a single activity or child process to a target group.
    Here's why and some background.
    Assume we have 10 targets in a target group.
    You start process A against those 10 targets, what CPO actually does is spawn 10 process instances each against *1* target from that group. It does not spawn just 1 process instance.
    Now assume you call child process B or an activity inside of a process. Even though you can select a target group that is only good for the parent process (or top process) level. Once you make that a child process, it operates similar to an activity.
    Here is why you cannot (currently) execute a child process or activity against a target group...
    And this is a discussion that has been running for some time, but how do you determine to the parent process if that child process was successful or failed? Some would argue it must be 100/100 for success, any failure is failure. Some argued that as long as it's better than 50% that's success. Some even argued that it should be just 1/100 for success. And that shows the main issue in allow child processes and activities to execute on target groups, which to this point is not supported or developed into the product.
    I understand your use-case and you can accomplish the same thing in the following manner:
    1) Set your variables in your parent process
    2) Use Find-Target to find all the targets in the group you want to execute against
    3) Use a For-Each loop to for-each through all the targets and then place the child process inside of the for-each loop and on the child process have it use the target item in the for-each loop iteration
    Now If you really want it to mimic a target group or broadcast, I would then go and select the child process(inside of the parent) to execute asynchronously.  (see below SS)
    Normally if you leave this unchecked each process would wait for the previous one to complete before starting. With that checked the for-each loop will continue pass each one, not caring if one succeeded or failed. It will just start them all in succession.
    I cannot remember if there is already an ENH for the target group @ activity level/child process use-case, but if not, feel free to open a TAC case and suggest it, or if there is already one, they can give you the ENH number. (as I said, I think there is one, as it's been a long running discussion topic)

  • Terminating Process in Terminal

    I am trying to start a process using terminal but I get the follong error:
    Speirs-Computer:~ dspeirs$ sudo perl -MCPAN -e shell
    Password:
    Terminal does not support AddHistory.
    CPAN.pm panic: Lockfile /Users/dspeirs/.cpan/.lock
    reports other host daniel-speirs-computer-7.local and other process 6445.
    Cannot proceed.
    Speirs-Computer:~ dspeirs$
    The problem is that the compauter thinks there is another process going on. How do I stop it? "host daniel-speirs-computer-7" was the name of the computer last night but I renamed it and I think that is part of the problem.
    I read online that someone suggested "Make sure you don't have any CPAN processes running and delete / root/.cpan/.lock." but I don't know here those files are located. HELP!
    - D

    one more question, it seems as though I have to reinstall CPAN again. It also doesn't look like it is going to let me. Any idea what to do?
    Last login: Fri Apr 28 18:15:11 on console
    Welcome to Darwin!
    Speirs-Computer:~ dspeirs$ sudo perl -MCPAN -e shell;
    Password:
    Terminal does not support AddHistory.
    There seems to be running another CPAN process (pid 1228). Contacting...
    Other job not responding. Shall I overwrite the lockfile? (Y/N) [y] y
    cpan shell -- CPAN exploration and modules installation (v1.7601)
    ReadLine support available (try 'install Bundle::CPAN')
    cpan> install Bundle::CPAN
    CPAN: Storable loaded ok
    Going to read /Users/dspeirs/.cpan/Metadata
    Database was generated on Wed, 26 Apr 2006 06:34:46 GMT
    LWP not available
    CPAN: Net::FTP loaded ok
    Fetching with Net::FTP:
    ftp://ftp.perl.org/pub/CPAN/authors/01mailrc.txt.gz
    Going to read /Users/dspeirs/.cpan/sources/authors/01mailrc.txt.gz
    CPAN: Compress::Zlib loaded ok
    LWP not available
    Fetching with Net::FTP:
    ftp://ftp.perl.org/pub/CPAN/modules/02packages.details.txt.gz
    Going to read /Users/dspeirs/.cpan/sources/modules/02packages.details.txt.gz
    Database was generated on Fri, 28 Apr 2006 19:10:23 GMT
    HTTP::Date not available
    There's a new CPAN.pm version (v1.87) available!
    [Current version is v1.7601]
    You might want to try
    install Bundle::CPAN
    reload cpan
    without quitting the current session. It should be a seamless upgrade
    while we are running...
    LWP not available
    Fetching with Net::FTP:
    ftp://ftp.perl.org/pub/CPAN/modules/03modlist.data.gz
    Going to read /Users/dspeirs/.cpan/sources/modules/03modlist.data.gz
    Going to write /Users/dspeirs/.cpan/Metadata
    Running install for module Digest::SHA
    Running make for M/MS/MSHELOR/Digest-SHA-5.34.tar.gz
    CPAN: Digest::MD5 loaded ok
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/M/MS/MSHELOR/Digest-SHA-5.34.tar.gz ok
    Scanning cache /Users/dspeirs/.cpan/build for sizes
    Digest-SHA-5.34/
    Digest-SHA-5.34/Changes
    Digest-SHA-5.34/Makefile.PL
    Digest-SHA-5.34/MANIFEST
    Digest-SHA-5.34/META.yml
    Digest-SHA-5.34/ppport.h
    Digest-SHA-5.34/README
    Digest-SHA-5.34/SHA.pm
    Digest-SHA-5.34/SHA.xs
    Digest-SHA-5.34/shasum
    Digest-SHA-5.34/SIGNATURE
    Digest-SHA-5.34/src/
    Digest-SHA-5.34/src/hmac.c
    Digest-SHA-5.34/src/hmac.h
    Digest-SHA-5.34/src/hmacxtra.c
    Digest-SHA-5.34/src/sha.c
    Digest-SHA-5.34/src/sha.h
    Digest-SHA-5.34/src/sha64bit.c
    Digest-SHA-5.34/src/sha64bit.h
    Digest-SHA-5.34/src/shaxtra.c
    Digest-SHA-5.34/t/
    Digest-SHA-5.34/t/0-pod-coverage.t
    Digest-SHA-5.34/t/0-pod.t
    Digest-SHA-5.34/t/1-exist.t
    Digest-SHA-5.34/t/1-hello-world.t
    Digest-SHA-5.34/t/2-nist-sha-1.t
    Digest-SHA-5.34/t/2-nist-sha-224.t
    Digest-SHA-5.34/t/2-nist-sha-256.t
    Digest-SHA-5.34/t/2-nist-sha-384.t
    Digest-SHA-5.34/t/2-nist-sha-512.t
    Digest-SHA-5.34/t/2-nist-sha-base64.t
    Digest-SHA-5.34/t/2-nist-sha-oo.t
    Digest-SHA-5.34/t/2-nist-vectors-bit.t
    Digest-SHA-5.34/t/2-nist-vectors-byte.t
    Digest-SHA-5.34/t/3-gillogly-easy.t
    Digest-SHA-5.34/t/3-gillogly-hard.t
    Digest-SHA-5.34/t/4-bitstr-increasing.t
    Digest-SHA-5.34/t/4-bitstr-large.t
    Digest-SHA-5.34/t/4-bitstr-random.t
    Digest-SHA-5.34/t/5-hmac-fips198.t
    Digest-SHA-5.34/t/5-hmac-rfc2202.t
    Digest-SHA-5.34/t/5-hmac-sha-256.t
    Digest-SHA-5.34/t/5-hmac-woodbury.t
    Digest-SHA-5.34/t/6-dump-load.t
    Digest-SHA-5.34/t/7-ireland.t
    Digest-SHA-5.34/t/gillogly/
    Digest-SHA-5.34/t/gillogly/state.011
    Digest-SHA-5.34/t/gillogly/state.110
    Digest-SHA-5.34/t/nist/
    Digest-SHA-5.34/t/nist/bit-hashes.sha1
    Digest-SHA-5.34/t/nist/bit-messages.sha1
    Digest-SHA-5.34/t/nist/byte-hashes.sha1
    Digest-SHA-5.34/t/nist/byte-messages.sha1
    Digest-SHA-5.34/t/nist/COPYRIGHT
    Digest-SHA-5.34/t/nist/Readme.txt
    Digest-SHA-5.34/t/state/
    Digest-SHA-5.34/t/state/state.1
    Digest-SHA-5.34/t/state/state.256
    Digest-SHA-5.34/t/state/state.384
    Digest-SHA-5.34/t/state/state.512
    Digest-SHA-5.34/typemap
    Removing previously used /Users/dspeirs/.cpan/build/Digest-SHA-5.34
    CPAN.pm: Going to build M/MS/MSHELOR/Digest-SHA-5.34.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Digest::SHA
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module Module::Signature
    Running make for A/AU/AUTRIJUS/Module-Signature-0.53.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/A/AU/AUTRIJUS/Module-Signature-0.53.tar .gz ok
    Module-Signature-0.53
    Module-Signature-0.53/inc
    Module-Signature-0.53/lib
    Module-Signature-0.53/AUDREY2006.pub
    Module-Signature-0.53/PAUSE2003.pub
    Module-Signature-0.53/Changes
    Module-Signature-0.53/t
    Module-Signature-0.53/MANIFEST
    Module-Signature-0.53/META.yml
    Module-Signature-0.53/script
    Module-Signature-0.53/AUTHORS
    Module-Signature-0.53/SIGNATURE
    Module-Signature-0.53/README
    Module-Signature-0.53/Makefile.PL
    Module-Signature-0.53/script/cpansign
    Module-Signature-0.53/t/1-basic.t
    Module-Signature-0.53/t/0-signature.t
    Module-Signature-0.53/lib/Module
    Module-Signature-0.53/lib/Module/Signature.pm
    Module-Signature-0.53/inc/Test
    Module-Signature-0.53/inc/Module
    Module-Signature-0.53/inc/Module/Install.pm
    Module-Signature-0.53/inc/Module/Install
    Module-Signature-0.53/inc/Module/AutoInstall.pm
    Module-Signature-0.53/inc/Module/Install/AutoInstall.pm
    Module-Signature-0.53/inc/Module/Install/Fetch.pm
    Module-Signature-0.53/inc/Module/Install/Makefile.pm
    Module-Signature-0.53/inc/Module/Install/Include.pm
    Module-Signature-0.53/inc/Module/Install/Scripts.pm
    Module-Signature-0.53/inc/Module/Install/Base.pm
    Module-Signature-0.53/inc/Module/Install/Metadata.pm
    Module-Signature-0.53/inc/Module/Install/Can.pm
    Module-Signature-0.53/inc/Module/Install/WriteAll.pm
    Module-Signature-0.53/inc/Module/Install/Win32.pm
    Module-Signature-0.53/inc/Test/Builder.pm
    Module-Signature-0.53/inc/Test/Builder
    Module-Signature-0.53/inc/Test/More.pm
    Module-Signature-0.53/inc/Test/Builder/Module.pm
    Removing previously used /Users/dspeirs/.cpan/build/Module-Signature-0.53
    CPAN.pm: Going to build A/AU/AUTRIJUS/Module-Signature-0.53.tar.gz
    * Looking for GnuPG (GNU Privacy Guard, a cryptographic signature tool)...
    GnugPG not found anywhere in your PATH, eek.
    * Looking for Crypt::OpenPGP (Pure-Perl OpenPGP implementation)...
    What do you want me to do?
    1) Let you install GnuPG manually while I'm waiting for your answer;
    it is available at http://www.gnupg.org/download/.
    2) Forget this cryptographic signature stuff for now.
    Your choice: [3] 2
    * Module::AutoInstall version 1.01
    * Checking for dependencies...
    [Core Features]
    - Test::More ...loaded. (0.62)
    [Sign and verify PAR (Perl Archive) files]
    - PAR::Dist ...missing.
    ==> Auto-install the 1 optional module(s) from CPAN? [y]
    [Support for SHA-256]
    - Digest::SHA::PurePerl ...missing.
    ==> Auto-install the 1 optional module(s) from CPAN? [y]
    * Since we're running under CPAN, I'll just let it take care
    of the dependency's installation later.
    * Module::AutoInstall configuration finished.
    Checking if your kit is complete...
    Looks good
    Warning: prerequisite Digest::SHA::PurePerl 0 not found.
    Warning: prerequisite PAR::Dist 0 not found.
    Writing Makefile for Module::Signature
    Now, please enter 'make test' to test, and 'make install' to install.
    ---- Unsatisfied dependencies detected during [A/AU/AUTRIJUS/Module-Signature-0.53.tar.gz] -----
    PAR::Dist
    Digest::SHA::PurePerl
    Shall I follow them and prepend them to the queue
    of modules we are processing right now? [yes]
    Running make test
    Delayed until after prerequisites
    Running make install
    Delayed until after prerequisites
    Running install for module File::Temp
    Running make for T/TJ/TJENNESS/File-Temp-0.16.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/T/TJ/TJENNESS/File-Temp-0.16.tar.gz ok
    File-Temp-0.16/
    File-Temp-0.16/misc/
    File-Temp-0.16/misc/benchmark.pl
    File-Temp-0.16/misc/results.txt
    File-Temp-0.16/META.yml
    File-Temp-0.16/t/
    File-Temp-0.16/t/posix.t
    File-Temp-0.16/t/tempfile.t
    File-Temp-0.16/t/mktemp.t
    File-Temp-0.16/t/security.t
    File-Temp-0.16/t/object.t
    File-Temp-0.16/MANIFEST
    File-Temp-0.16/ChangeLog
    File-Temp-0.16/Temp.pm
    File-Temp-0.16/Makefile.PL
    File-Temp-0.16/README
    Removing previously used /Users/dspeirs/.cpan/build/File-Temp-0.16
    CPAN.pm: Going to build T/TJ/TJENNESS/File-Temp-0.16.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for File::Temp
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module File::HomeDir
    Running make for A/AD/ADAMK/File-HomeDir-0.56.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/A/AD/ADAMK/File-HomeDir-0.56.tar.gz ok
    File-HomeDir-0.56/
    File-HomeDir-0.56/inc/
    File-HomeDir-0.56/inc/Module/
    File-HomeDir-0.56/inc/Module/Install.pm
    File-HomeDir-0.56/inc/Module/Install/
    File-HomeDir-0.56/inc/Module/Install/AutoInstall.pm
    File-HomeDir-0.56/inc/Module/Install/Fetch.pm
    File-HomeDir-0.56/inc/Module/Install/Makefile.pm
    File-HomeDir-0.56/inc/Module/Install/Include.pm
    File-HomeDir-0.56/inc/Module/Install/Base.pm
    File-HomeDir-0.56/inc/Module/Install/Metadata.pm
    File-HomeDir-0.56/inc/Module/Install/Can.pm
    File-HomeDir-0.56/inc/Module/Install/WriteAll.pm
    File-HomeDir-0.56/inc/Module/Install/Win32.pm
    File-HomeDir-0.56/inc/Module/AutoInstall.pm
    File-HomeDir-0.56/lib/
    File-HomeDir-0.56/lib/File/
    File-HomeDir-0.56/lib/File/HomeDir/
    File-HomeDir-0.56/lib/File/HomeDir/MacOS9.pm
    File-HomeDir-0.56/lib/File/HomeDir/Windows.pm
    File-HomeDir-0.56/lib/File/HomeDir/Unix.pm
    File-HomeDir-0.56/lib/File/HomeDir/Darwin.pm
    File-HomeDir-0.56/lib/File/HomeDir.pm
    File-HomeDir-0.56/Changes
    File-HomeDir-0.56/MANIFEST
    File-HomeDir-0.56/t/
    File-HomeDir-0.56/t/99_pod.t
    File-HomeDir-0.56/t/02_main.t
    File-HomeDir-0.56/t/01_compile.t
    File-HomeDir-0.56/META.yml
    File-HomeDir-0.56/README
    File-HomeDir-0.56/Makefile.PL
    File-HomeDir-0.56/LICENSE
    Removing previously used /Users/dspeirs/.cpan/build/File-HomeDir-0.56
    CPAN.pm: Going to build A/AD/ADAMK/File-HomeDir-0.56.tar.gz
    * Module::AutoInstall version 1.02
    * Checking for Perl dependencies...
    [Core Features]
    - Test::More ...loaded. (0.47 >= 0.47)
    - File::Spec ...loaded. (3.01 >= 0.80)
    * Module::AutoInstall configuration finished.
    Checking if your kit is complete...
    Looks good
    Writing Makefile for File::HomeDir
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module File::Spec
    Running make for K/KW/KWILLIAMS/PathTools-3.18.tar.gz
    LWP not available
    Fetching with Net::FTP:
    ftp://ftp.perl.org/pub/CPAN/authors/id/K/KW/KWILLIAMS/PathTools-3.18.tar.gz
    LWP not available
    Fetching with Net::FTP:
    ftp://ftp.perl.org/pub/CPAN/authors/id/K/KW/KWILLIAMS/CHECKSUMS
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/K/KW/KWILLIAMS/PathTools-3.18.tar.gz ok
    PathTools-3.18/
    PathTools-3.18/Build.PL
    PathTools-3.18/Changes
    PathTools-3.18/Cwd.pm
    PathTools-3.18/Cwd.xs
    PathTools-3.18/INSTALL
    PathTools-3.18/lib/
    PathTools-3.18/lib/File/
    PathTools-3.18/lib/File/Spec/
    PathTools-3.18/lib/File/Spec/Cygwin.pm
    PathTools-3.18/lib/File/Spec/Epoc.pm
    PathTools-3.18/lib/File/Spec/Functions.pm
    PathTools-3.18/lib/File/Spec/Mac.pm
    PathTools-3.18/lib/File/Spec/OS2.pm
    PathTools-3.18/lib/File/Spec/Unix.pm
    PathTools-3.18/lib/File/Spec/VMS.pm
    PathTools-3.18/lib/File/Spec/Win32.pm
    PathTools-3.18/lib/File/Spec.pm
    PathTools-3.18/Makefile.PL
    PathTools-3.18/MANIFEST
    PathTools-3.18/META.yml
    PathTools-3.18/ppport.h
    PathTools-3.18/SIGNATURE
    PathTools-3.18/t/
    PathTools-3.18/t/crossplatform.t
    PathTools-3.18/t/cwd.t
    PathTools-3.18/t/Functions.t
    PathTools-3.18/t/lib/
    PathTools-3.18/t/lib/Test/
    PathTools-3.18/t/lib/Test/Builder.pm
    PathTools-3.18/t/lib/Test/More.pm
    PathTools-3.18/t/lib/Test/Simple.pm
    PathTools-3.18/t/lib/Test/Tutorial.pod
    PathTools-3.18/t/rel2abs2rel.t
    PathTools-3.18/t/Spec.t
    PathTools-3.18/t/taint.t
    PathTools-3.18/t/tmpdir.t
    PathTools-3.18/t/win32.t
    CPAN.pm: Going to build K/KW/KWILLIAMS/PathTools-3.18.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Cwd
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module Compress::Zlib
    Running make for P/PM/PMQS/Compress-Zlib-1.41.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/P/PM/PMQS/Compress-Zlib-1.41.tar.gz ok
    Compress-Zlib-1.41/
    Compress-Zlib-1.41/zlib-src/
    Compress-Zlib-1.41/zlib-src/compress.c
    Compress-Zlib-1.41/zlib-src/inffixed.h
    Compress-Zlib-1.41/zlib-src/zlib.h
    Compress-Zlib-1.41/zlib-src/zutil.h
    Compress-Zlib-1.41/zlib-src/inftrees.h
    Compress-Zlib-1.41/zlib-src/gzio.c
    Compress-Zlib-1.41/zlib-src/zconf.h
    Compress-Zlib-1.41/zlib-src/crc32.h
    Compress-Zlib-1.41/zlib-src/uncompr.c
    Compress-Zlib-1.41/zlib-src/zutil.c
    Compress-Zlib-1.41/zlib-src/deflate.c
    Compress-Zlib-1.41/zlib-src/inftrees.c
    Compress-Zlib-1.41/zlib-src/crc32.c
    Compress-Zlib-1.41/zlib-src/deflate.h
    Compress-Zlib-1.41/zlib-src/inffast.h
    Compress-Zlib-1.41/zlib-src/adler32.c
    Compress-Zlib-1.41/zlib-src/trees.c
    Compress-Zlib-1.41/zlib-src/infback.c
    Compress-Zlib-1.41/zlib-src/trees.h
    Compress-Zlib-1.41/zlib-src/inflate.h
    Compress-Zlib-1.41/zlib-src/inffast.c
    Compress-Zlib-1.41/zlib-src/inflate.c
    Compress-Zlib-1.41/examples/
    Compress-Zlib-1.41/examples/gzgrep
    Compress-Zlib-1.41/examples/filtdef
    Compress-Zlib-1.41/examples/filtinf
    Compress-Zlib-1.41/examples/gzstream
    Compress-Zlib-1.41/examples/gzcat
    Compress-Zlib-1.41/Zlib.xs
    Compress-Zlib-1.41/Changes
    Compress-Zlib-1.41/fallback.h
    Compress-Zlib-1.41/MANIFEST
    Compress-Zlib-1.41/typemap
    Compress-Zlib-1.41/t/
    Compress-Zlib-1.41/t/05gzsetp.t
    Compress-Zlib-1.41/t/03examples.t
    Compress-Zlib-1.41/t/06gzdopen.t
    Compress-Zlib-1.41/t/01version.t
    Compress-Zlib-1.41/t/02zlib.t
    Compress-Zlib-1.41/t/04encoding.t
    Compress-Zlib-1.41/META.yml
    Compress-Zlib-1.41/fallback.xs
    Compress-Zlib-1.41/ANNOUNCE
    Compress-Zlib-1.41/Zlib.pm
    Compress-Zlib-1.41/hints/
    Compress-Zlib-1.41/hints/mpeix.pl
    Compress-Zlib-1.41/config.in
    Compress-Zlib-1.41/Makefile.PL
    Compress-Zlib-1.41/README
    Removing previously used /Users/dspeirs/.cpan/build/Compress-Zlib-1.41
    CPAN.pm: Going to build P/PM/PMQS/Compress-Zlib-1.41.tar.gz
    Parsing config.in...
    Building Zlib enabled
    Looks Good.
    Up/Downgrade complete.
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Compress::Zlib
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module Archive::Tar
    Running make for K/KA/KANE/Archive-Tar-1.29.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/K/KA/KANE/Archive-Tar-1.29.tar.gz ok
    Archive-Tar-1.29/
    Archive-Tar-1.29/bin/
    Archive-Tar-1.29/bin/ptar
    Archive-Tar-1.29/bin/ptardiff
    Archive-Tar-1.29/CHANGES
    Archive-Tar-1.29/lib/
    Archive-Tar-1.29/lib/Archive/
    Archive-Tar-1.29/lib/Archive/Tar/
    Archive-Tar-1.29/lib/Archive/Tar/Constant.pm
    Archive-Tar-1.29/lib/Archive/Tar/File.pm
    Archive-Tar-1.29/lib/Archive/Tar.pm
    Archive-Tar-1.29/Makefile.PL
    Archive-Tar-1.29/MANIFEST
    Archive-Tar-1.29/META.yml
    Archive-Tar-1.29/README
    Archive-Tar-1.29/t/
    Archive-Tar-1.29/t/00_setup.t
    Archive-Tar-1.29/t/01_use.t
    Archive-Tar-1.29/t/02_methods.t
    Archive-Tar-1.29/t/03_file.t
    Archive-Tar-1.29/t/04resolvedissues.t
    Archive-Tar-1.29/t/99_clean.t
    Archive-Tar-1.29/t/99_pod.t
    Removing previously used /Users/dspeirs/.cpan/build/Archive-Tar-1.29
    CPAN.pm: Going to build K/KA/KANE/Archive-Tar-1.29.tar.gz
    Archive::Tar comes with a utility called 'ptardiff' which lets you run diffs against tar archives.
    However, this utility requires you to have Text::Diff installed.
    To add Text::Diff as a prerequisite, please supply the '-d' option when invoking this Makefile.PL.
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Archive::Tar
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module Archive::Zip
    Running make for S/SM/SMPETERS/Archive-Zip-1.16.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/S/SM/SMPETERS/Archive-Zip-1.16.tar.gz ok
    Archive-Zip-1.16
    Archive-Zip-1.16/t
    Archive-Zip-1.16/t/testex.t
    Archive-Zip-1.16/t/testUpdate.t
    Archive-Zip-1.16/t/00.load.t
    Archive-Zip-1.16/t/testMemberRead.t
    Archive-Zip-1.16/t/pod.t
    Archive-Zip-1.16/t/testTree.t
    Archive-Zip-1.16/t/test.t
    Archive-Zip-1.16/t/common.pl
    Archive-Zip-1.16/Changes
    Archive-Zip-1.16/examples
    Archive-Zip-1.16/examples/mfh.pl
    Archive-Zip-1.16/examples/updateZip.pl
    Archive-Zip-1.16/examples/unzipAll.pl
    Archive-Zip-1.16/examples/extract.pl
    Archive-Zip-1.16/examples/readScalar.pl
    Archive-Zip-1.16/examples/copy.pl
    Archive-Zip-1.16/examples/zip.pl
    Archive-Zip-1.16/examples/zipGrep.pl
    Archive-Zip-1.16/examples/calcSizes.pl
    Archive-Zip-1.16/examples/ziprecent.pl
    Archive-Zip-1.16/examples/zipcheck.pl
    Archive-Zip-1.16/examples/updateTree.pl
    Archive-Zip-1.16/examples/writeScalar.pl
    Archive-Zip-1.16/examples/selfex.pl
    Archive-Zip-1.16/examples/zipinfo.pl
    Archive-Zip-1.16/examples/ziptest.pl
    Archive-Zip-1.16/examples/mailZip.pl
    Archive-Zip-1.16/examples/writeScalar2.pl
    Archive-Zip-1.16/docs
    Archive-Zip-1.16/docs/Archive-Zip.pdf
    Archive-Zip-1.16/docs/appnote.iz
    Archive-Zip-1.16/docs/Appnote.txt
    Archive-Zip-1.16/docs/ideas.txt
    Archive-Zip-1.16/docs/Archive-Zip.ps
    Archive-Zip-1.16/MANIFEST
    Archive-Zip-1.16/TODO
    Archive-Zip-1.16/crc32
    Archive-Zip-1.16/META.yml
    Archive-Zip-1.16/lib
    Archive-Zip-1.16/lib/Archive
    Archive-Zip-1.16/lib/Archive/Zip
    Archive-Zip-1.16/lib/Archive/Zip/BufferedFileHandle.pm
    Archive-Zip-1.16/lib/Archive/Zip/MemberRead.pm
    Archive-Zip-1.16/lib/Archive/Zip/MockFileHandle.pm
    Archive-Zip-1.16/lib/Archive/Zip/Tree.pm
    Archive-Zip-1.16/lib/Archive/Zip/FAQ.pod
    Archive-Zip-1.16/lib/Archive/Zip.pod
    Archive-Zip-1.16/lib/Archive/Zip.pm
    Archive-Zip-1.16/INSTALL
    Archive-Zip-1.16/README
    Archive-Zip-1.16/Makefile.PL
    Removing previously used /Users/dspeirs/.cpan/build/Archive-Zip-1.16
    CPAN.pm: Going to build S/SM/SMPETERS/Archive-Zip-1.16.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Archive::Zip
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Data::Dumper is up to date.
    Running install for module Net::Telnet
    Running make for J/JR/JROGERS/Net-Telnet-3.03.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/J/JR/JROGERS/Net-Telnet-3.03.tar.gz ok
    Net-Telnet-3.03/
    Net-Telnet-3.03/Makefile.PL
    Net-Telnet-3.03/ChangeLog
    Net-Telnet-3.03/lib/
    Net-Telnet-3.03/lib/Net/
    Net-Telnet-3.03/lib/Net/Telnet.pm
    Net-Telnet-3.03/t/
    Net-Telnet-3.03/t/select.t
    Net-Telnet-3.03/README
    Net-Telnet-3.03/MANIFEST
    Removing previously used /Users/dspeirs/.cpan/build/Net-Telnet-3.03
    CPAN.pm: Going to build J/JR/JROGERS/Net-Telnet-3.03.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Net::Telnet
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Net::Cmd is up to date.
    Bundle summary: The following items in bundle Bundle::libnet had
    installation problems:
    Net::Telnet
    Running install for module Term::ReadKey
    Running make for J/JS/JSTOWE/TermReadKey-2.30.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/J/JS/JSTOWE/TermReadKey-2.30.tar.gz ok
    TermReadKey-2.30/
    TermReadKey-2.30/genchars.pl
    TermReadKey-2.30/Makefile.PL
    TermReadKey-2.30/Configure.pm
    TermReadKey-2.30/test.pl
    TermReadKey-2.30/ReadKey.pm
    TermReadKey-2.30/META.yml
    TermReadKey-2.30/ReadKey.xs
    TermReadKey-2.30/ppport.h
    TermReadKey-2.30/MANIFEST
    TermReadKey-2.30/README
    Removing previously used /Users/dspeirs/.cpan/build/TermReadKey-2.30
    CPAN.pm: Going to build J/JS/JSTOWE/TermReadKey-2.30.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Term::ReadKey
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module Term::ReadLine::Perl
    Running make for I/IL/ILYAZ/modules/Term-ReadLine-Perl-1.03.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/I/IL/ILYAZ/modules/Term-ReadLine-Perl-1 .03.tar.gz ok
    Term-ReadLine-Perl-1.03/
    Term-ReadLine-Perl-1.03/CHANGES
    Term-ReadLine-Perl-1.03/Makefile.PL
    Term-ReadLine-Perl-1.03/MANIFEST
    Term-ReadLine-Perl-1.03/ReadLine/
    Term-ReadLine-Perl-1.03/ReadLine/Perl.pm
    Term-ReadLine-Perl-1.03/ReadLine/readline.pm
    Term-ReadLine-Perl-1.03/README
    Term-ReadLine-Perl-1.03/test.pl
    Removing previously used /Users/dspeirs/.cpan/build/Term-ReadLine-Perl-1.03
    CPAN.pm: Going to build I/IL/ILYAZ/modules/Term-ReadLine-Perl-1.03.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Term::ReadLine
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module YAML
    Running make for I/IN/INGY/YAML-0.58.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/I/IN/INGY/YAML-0.58.tar.gz ok
    YAML-0.58/
    YAML-0.58/Changes
    YAML-0.58/inc/
    YAML-0.58/inc/Module/
    YAML-0.58/inc/Module/Install/
    YAML-0.58/inc/Module/Install/Base.pm
    YAML-0.58/inc/Module/Install/Can.pm
    YAML-0.58/inc/Module/Install/Fetch.pm
    YAML-0.58/inc/Module/Install/Include.pm
    YAML-0.58/inc/Module/Install/Makefile.pm
    YAML-0.58/inc/Module/Install/Metadata.pm
    YAML-0.58/inc/Module/Install/Scripts.pm
    YAML-0.58/inc/Module/Install/TestBase.pm
    YAML-0.58/inc/Module/Install/Win32.pm
    YAML-0.58/inc/Module/Install/WriteAll.pm
    YAML-0.58/inc/Module/Install.pm
    YAML-0.58/inc/Spiffy.pm
    YAML-0.58/inc/Test/
    YAML-0.58/inc/Test/Base/
    YAML-0.58/inc/Test/Base/Filter.pm
    YAML-0.58/inc/Test/Base.pm
    YAML-0.58/inc/Test/Builder/
    YAML-0.58/inc/Test/Builder/Module.pm
    YAML-0.58/inc/Test/Builder.pm
    YAML-0.58/inc/Test/More.pm
    YAML-0.58/lib/
    YAML-0.58/lib/Test/
    YAML-0.58/lib/Test/YAML.pm
    YAML-0.58/lib/YAML/
    YAML-0.58/lib/YAML/Base.pm
    YAML-0.58/lib/YAML/Dumper/
    YAML-0.58/lib/YAML/Dumper/Base.pm
    YAML-0.58/lib/YAML/Dumper.pm
    YAML-0.58/lib/YAML/Error.pm
    YAML-0.58/lib/YAML/Loader/
    YAML-0.58/lib/YAML/Loader/Base.pm
    YAML-0.58/lib/YAML/Loader.pm
    YAML-0.58/lib/YAML/Marshall.pm
    YAML-0.58/lib/YAML/Node.pm
    YAML-0.58/lib/YAML/Tag.pm
    YAML-0.58/lib/YAML/Types.pm
    YAML-0.58/lib/YAML.pm
    YAML-0.58/Makefile.PL
    YAML-0.58/MANIFEST
    YAML-0.58/META.yml
    YAML-0.58/README
    YAML-0.58/t/
    YAML-0.58/t/2-scalars.t
    YAML-0.58/t/Base.pm
    YAML-0.58/t/basic-tests.t
    YAML-0.58/t/bugs-emailed.t
    YAML-0.58/t/bugs-rt.t
    YAML-0.58/t/changes.t
    YAML-0.58/t/dump-basics.t
    YAML-0.58/t/dump-blessed.t
    YAML-0.58/t/dump-code.t
    YAML-0.58/t/dump-file.t
    YAML-0.58/t/dump-nested.t
    YAML-0.58/t/dump-opts.t
    YAML-0.58/t/dump-perl-types.t
    YAML-0.58/t/dump-stringify.t
    YAML-0.58/t/dump-tests.t
    YAML-0.58/t/dump-works.t
    YAML-0.58/t/errors.t
    YAML-0.58/t/export.t
    YAML-0.58/t/freeze-thaw.t
    YAML-0.58/t/global-api.t
    YAML-0.58/t/inbox.t
    YAML-0.58/t/load-fails.t
    YAML-0.58/t/load-passes.t
    YAML-0.58/t/load-slides.t
    YAML-0.58/t/load-spec.t
    YAML-0.58/t/load-tests.t
    YAML-0.58/t/load-works.t
    YAML-0.58/t/marshall.t
    YAML-0.58/t/meta-yml.t
    YAML-0.58/t/node-info.t
    YAML-0.58/t/pugs-objects.t
    YAML-0.58/t/svk-config.yaml
    YAML-0.58/t/svk.t
    YAML-0.58/t/test.t
    YAML-0.58/t/TestYAML.pm
    YAML-0.58/ysh
    Removing previously used /Users/dspeirs/.cpan/build/YAML-0.58
    CPAN.pm: Going to build I/IN/INGY/YAML-0.58.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for YAML
    ---- Unsatisfied dependencies detected during [I/IN/INGY/YAML-0.58.tar.gz] -----
    Test::Base
    Shall I follow them and prepend them to the queue
    of modules we are processing right now? [yes]
    Running make test
    Delayed until after prerequisites
    Running make install
    Delayed until after prerequisites
    Running install for module Text::Glob
    Running make for R/RC/RCLAMP/Text-Glob-0.06.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/R/RC/RCLAMP/Text-Glob-0.06.tar.gz ok
    Text-Glob-0.06/
    Text-Glob-0.06/t/
    Text-Glob-0.06/t/Text-Glob.t
    Text-Glob-0.06/MANIFEST
    Text-Glob-0.06/META.yml
    Text-Glob-0.06/lib/
    Text-Glob-0.06/lib/Text/
    Text-Glob-0.06/lib/Text/Glob.pm
    Text-Glob-0.06/Changes
    Text-Glob-0.06/Build.PL
    Text-Glob-0.06/Makefile.PL
    Text-Glob-0.06/README
    Removing previously used /Users/dspeirs/.cpan/build/Text-Glob-0.06
    CPAN.pm: Going to build R/RC/RCLAMP/Text-Glob-0.06.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Text::Glob
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module Module::Build
    Running make for K/KW/KWILLIAMS/Module-Build-0.28.tar.gz
    LWP not available
    Fetching with Net::FTP:
    ftp://ftp.perl.org/pub/CPAN/authors/id/K/KW/KWILLIAMS/Module-Build-0.28.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/K/KW/KWILLIAMS/Module-Build-0.28.tar.gz ok
    Module-Build-0.28/
    Module-Build-0.28/Build.PL
    Module-Build-0.28/Changes
    Module-Build-0.28/INSTALL
    Module-Build-0.28/lib/
    Module-Build-0.28/lib/Module/
    Module-Build-0.28/lib/Module/Build/
    Module-Build-0.28/lib/Module/Build/API.pod
    Module-Build-0.28/lib/Module/Build/Authoring.pod
    Module-Build-0.28/lib/Module/Build/Base.pm
    Module-Build-0.28/lib/Module/Build/Compat.pm
    Module-Build-0.28/lib/Module/Build/Cookbook.pm
    Module-Build-0.28/lib/Module/Build/ModuleInfo.pm
    Module-Build-0.28/lib/Module/Build/Notes.pm
    Module-Build-0.28/lib/Module/Build/Platform/
    Module-Build-0.28/lib/Module/Build/Platform/aix.pm
    Module-Build-0.28/lib/Module/Build/Platform/Amiga.pm
    Module-Build-0.28/lib/Module/Build/Platform/cygwin.pm
    Module-Build-0.28/lib/Module/Build/Platform/darwin.pm
    Module-Build-0.28/lib/Module/Build/Platform/Default.pm
    Module-Build-0.28/lib/Module/Build/Platform/EBCDIC.pm
    Module-Build-0.28/lib/Module/Build/Platform/MacOS.pm
    Module-Build-0.28/lib/Module/Build/Platform/MPEiX.pm
    Module-Build-0.28/lib/Module/Build/Platform/os2.pm
    Module-Build-0.28/lib/Module/Build/Platform/RiscOS.pm
    Module-Build-0.28/lib/Module/Build/Platform/Unix.pm
    Module-Build-0.28/lib/Module/Build/Platform/VMS.pm
    Module-Build-0.28/lib/Module/Build/Platform/VOS.pm
    Module-Build-0.28/lib/Module/Build/Platform/Windows.pm
    Module-Build-0.28/lib/Module/Build/PodParser.pm
    Module-Build-0.28/lib/Module/Build/PPMMaker.pm
    Module-Build-0.28/lib/Module/Build/YAML.pm
    Module-Build-0.28/lib/Module/Build.pm
    Module-Build-0.28/Makefile.PL
    Module-Build-0.28/MANIFEST
    Module-Build-0.28/META.yml
    Module-Build-0.28/README
    Module-Build-0.28/scripts/
    Module-Build-0.28/scripts/config_data
    Module-Build-0.28/SIGNATURE
    Module-Build-0.28/t/
    Module-Build-0.28/t/basic.t
    Module-Build-0.28/t/bundled/
    Module-Build-0.28/t/bundled/Test/
    Module-Build-0.28/t/bundled/Test/Builder.pm
    Module-Build-0.28/t/bundled/Test/More.pm
    Module-Build-0.28/t/bundled/Test/Simple.pm
    Module-Build-0.28/t/bundled/Tie/
    Module-Build-0.28/t/bundled/Tie/CPHash.pm
    Module-Build-0.28/t/compat.t
    Module-Build-0.28/t/destinations.t
    Module-Build-0.28/t/ext.t
    Module-Build-0.28/t/extend.t
    Module-Build-0.28/t/files.t
    Module-Build-0.28/t/install.t
    Module-Build-0.28/t/lib/
    Module-Build-0.28/t/lib/DistGen.pm
    Module-Build-0.28/t/lib/MBTest.pm
    Module-Build-0.28/t/manifypods.t
    Module-Build-0.28/t/mbyaml.t
    Module-Build-0.28/t/metadata.t
    Module-Build-0.28/t/metadata2.t
    Module-Build-0.28/t/moduleinfo.t
    Module-Build-0.28/t/notes.t
    Module-Build-0.28/t/parents.t
    Module-Build-0.28/t/pod_parser.t
    Module-Build-0.28/t/ppm.t
    Module-Build-0.28/t/runthrough.t
    Module-Build-0.28/t/signature.t
    Module-Build-0.28/t/tilde.t
    Module-Build-0.28/t/versions.t
    Module-Build-0.28/t/xs.t
    CPAN.pm: Going to build K/KW/KWILLIAMS/Module-Build-0.28.tar.gz
    # running Build.PL
    /usr/bin/perl Build.PL
    Checking whether your kit is complete...
    Looks good
    Checking prerequisites...
    * Optional prerequisite Module::Signature is not installed
    * Optional prerequisite ExtUtils::ParseXS is not installed
    * Optional prerequisite Pod::Readme is not installed
    * Optional prerequisite ExtUtils::CBuilder is not installed
    ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
    of the modules indicated above before proceeding with this installation
    Checking features:
    manpage_support....enabled
    YAML_support.......disabled
    - YAML is not installed
    C_support..........disabled
    - ExtUtils::CBuilder is not installed
    * Optional prerequisite ExtUtils::ParseXS is not installed
    HTML_support.......enabled
    Creating new 'Build' script for 'Module-Build' version '0.28'
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module CPAN
    Running make for A/AN/ANDK/CPAN-1.87.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/A/AN/ANDK/CPAN-1.87.tar.gz ok
    CPAN-1.87/
    CPAN-1.87/t/
    CPAN-1.87/t/30shell.t
    CPAN-1.87/t/50pod.t
    CPAN-1.87/t/CPAN/
    CPAN-1.87/t/CPAN/modules/
    CPAN-1.87/t/CPAN/modules/02packages.details.txt
    CPAN-1.87/t/CPAN/modules/03modlist.data
    CPAN-1.87/t/CPAN/CpanTestDummies-1.55.pm
    CPAN-1.87/t/CPAN/authors/
    CPAN-1.87/t/CPAN/authors/id/
    CPAN-1.87/t/CPAN/authors/id/A/
    CPAN-1.87/t/CPAN/authors/id/A/AN/
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/CHECKSUMS@588
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-Fails-1.01.tar .gz
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Zip-1.01.zip
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-BuildOrMake-1.01.tar .gz
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-Failearly-1.01. tar.gz
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Make-1.02.tar.gz
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/CPAN-Test-Dummy-Perl5-Build-1.01.tar.gz
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/CHECKSUMS
    CPAN-1.87/t/CPAN/authors/id/A/AN/ANDK/NotInChecksums-0.000.tar.gz
    CPAN-1.87/t/CPAN/authors/id/A/AN/CHECKSUMS
    CPAN-1.87/t/CPAN/authors/id/A/CHECKSUMS
    CPAN-1.87/t/CPAN/authors/id/CHECKSUMS
    CPAN-1.87/t/CPAN/authors/01mailrc.txt
    CPAN-1.87/t/CPAN/TestConfig.pm
    CPAN-1.87/t/12cpan.t
    CPAN-1.87/t/02nox.t
    CPAN-1.87/t/01loadme.t
    CPAN-1.87/t/10version.t
    CPAN-1.87/t/03pkgs.t
    CPAN-1.87/t/30shell.pod
    CPAN-1.87/t/00signature.t
    CPAN-1.87/t/README.shell.txt
    CPAN-1.87/t/11mirroredby.t
    CPAN-1.87/lib/
    CPAN-1.87/lib/CPAN.pm
    CPAN-1.87/lib/CPAN/
    CPAN-1.87/lib/CPAN/Debug.pm
    CPAN-1.87/lib/CPAN/FirstTime.pm
    CPAN-1.87/lib/CPAN/Admin.pm
    CPAN-1.87/lib/CPAN/Tarzip.pm
    CPAN-1.87/lib/CPAN/Version.pm
    CPAN-1.87/lib/CPAN/Nox.pm
    CPAN-1.87/lib/CPAN/HandleConfig.pm
    CPAN-1.87/inc/
    CPAN-1.87/inc/Test/
    CPAN-1.87/inc/Test/Builder.pm
    CPAN-1.87/inc/Test/More.pm
    CPAN-1.87/PAUSE2003.pub
    CPAN-1.87/Changes
    CPAN-1.87/MANIFEST
    CPAN-1.87/scripts/
    CPAN-1.87/scripts/cpan
    CPAN-1.87/META.yml
    CPAN-1.87/ChangeLog
    CPAN-1.87/Changes.old
    CPAN-1.87/ChangeLog.old
    CPAN-1.87/MANIFEST.SKIP
    CPAN-1.87/PAUSE2005.pub
    CPAN-1.87/Todo
    CPAN-1.87/SIGNATURE
    CPAN-1.87/README
    CPAN-1.87/Makefile.PL
    Removing previously used /Users/dspeirs/.cpan/build/CPAN-1.87
    CPAN.pm: Going to build A/AN/ANDK/CPAN-1.87.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for CPAN
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Bundle summary: The following items in bundle Bundle::CPAN had installation
    problems:
    Digest::SHA Module::Signature File::Temp File::HomeDir File::Spec
    Compress::Zlib Archive::Tar Archive::Zip Bundle::libnet Term::ReadKey
    Term::ReadLine::Perl YAML Text::Glob Module::Build CPAN and the following
    items had problems during recursive bundle calls: Net::Telnet
    Running install for module Test::Base
    Running make for I/IN/INGY/Test-Base-0.50.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/I/IN/INGY/Test-Base-0.50.tar.gz ok
    Test-Base-0.50/
    Test-Base-0.50/Changes
    Test-Base-0.50/inc/
    Test-Base-0.50/inc/Module/
    Test-Base-0.50/inc/Module/Install/
    Test-Base-0.50/inc/Module/Install/Base.pm
    Test-Base-0.50/inc/Module/Install/Can.pm
    Test-Base-0.50/inc/Module/Install/Fetch.pm
    Test-Base-0.50/inc/Module/Install/Makefile.pm
    Test-Base-0.50/inc/Module/Install/Metadata.pm
    Test-Base-0.50/inc/Module/Install/Win32.pm
    Test-Base-0.50/inc/Module/Install/WriteAll.pm
    Test-Base-0.50/inc/Module/Install.pm
    Test-Base-0.50/lib/
    Test-Base-0.50/lib/Module/
    Test-Base-0.50/lib/Module/Install/
    Test-Base-0.50/lib/Module/Install/TestBase.pm
    Test-Base-0.50/lib/Test/
    Test-Base-0.50/lib/Test/Base/
    Test-Base-0.50/lib/Test/Base/Filter.pm
    Test-Base-0.50/lib/Test/Base.pm
    Test-Base-0.50/Makefile.PL
    Test-Base-0.50/MANIFEST
    Test-Base-0.50/META.yml
    Test-Base-0.50/README
    Test-Base-0.50/t/
    Test-Base-0.50/t/append.t
    Test-Base-0.50/t/arguments.t
    Test-Base-0.50/t/array.t
    Test-Base-0.50/t/autoload.t
    Test-Base-0.50/t/base64.t
    Test-Base-0.50/t/BaseTest.pm
    Test-Base-0.50/t/blocks-scalar.t
    Test-Base-0.50/t/blocks_grep.t
    Test-Base-0.50/t/chomp.t
    Test-Base-0.50/t/chop.t
    Test-Base-0.50/t/compact.t
    Test-Base-0.50/t/compile.t
    Test-Base-0.50/t/delimiters.t
    Test-Base-0.50/t/description.t
    Test-Base-0.50/t/diff_is.t
    Test-Base-0.50/t/dos_spec
    Test-Base-0.50/t/dumper.t
    Test-Base-0.50/t/embed_perl.t
    Test-Base-0.50/t/escape.t
    Test-Base-0.50/t/eval.t
    Test-Base-0.50/t/eval_all.t
    Test-Base-0.50/t/eval_stderr.t
    Test-Base-0.50/t/eval_stdout.t
    Test-Base-0.50/t/export.t
    Test-Base-0.50/t/filter_arguments.t
    Test-Base-0.50/t/filter_delay.t
    Test-Base-0.50/t/filter_functions.t
    Test-Base-0.50/t/filters-append.t
    Test-Base-0.50/t/filters.t
    Test-Base-0.50/t/filters_map.t
    Test-Base-0.50/t/first_block.t
    Test-Base-0.50/t/flatten.t
    Test-Base-0.50/t/get_url.t
    Test-Base-0.50/t/hash.t
    Test-Base-0.50/t/head.t
    Test-Base-0.50/t/internals.t
    Test-Base-0.50/t/is.t
    Test-Base-0.50/t/jit-run.t
    Test-Base-0.50/t/join-deep.t
    Test-Base-0.50/t/join.t
    Test-Base-0.50/t/last.t
    Test-Base-0.50/t/late.t
    Test-Base-0.50/t/lazy-filters.t
    Test-Base-0.50/t/lines.t
    Test-Base-0.50/t/list.t
    Test-Base-0.50/t/main_filters.t
    Test-Base-0.50/t/multi-level-inherit.t
    Test-Base-0.50/t/name.t
    Test-Base-0.50/t/next.t
    Test-Base-0.50/t/no_diff.t
    Test-Base-0.50/t/no_plan.t
    Test-Base-0.50/t/normalize.t
    Test-Base-0.50/t/only-with-implicit.t
    Test-Base-0.50/t/only.t
    Test-Base-0.50/t/oo.t
    Test-Base-0.50/t/oo_run.t
    Test-Base-0.50/t/parentheses.t
    Test-Base-0.50/t/prepend.t
    Test-Base-0.50/t/preserve-order.t
    Test-Base-0.50/t/prototypes.t
    Test-Base-0.50/t/quick-plan.t
    Test-Base-0.50/t/quick_test.t
    Test-Base-0.50/t/read_file.t
    Test-Base-0.50/t/regexp.t
    Test-Base-0.50/t/repeated-filters.t
    Test-Base-0.50/t/require.t
    Test-Base-0.50/t/reserved_names.t
    Test-Base-0.50/t/reverse-deep.t
    Test-Base-0.50/t/reverse.t
    Test-Base-0.50/t/run-args.t
    Test-Base-0.50/t/run_compare.t
    Test-Base-0.50/t/run_is.t
    Test-Base-0.50/t/runisdeeply.t
    Test-Base-0.50/t/run_like.t
    Test-Base-0.50/t/run_unlike.t
    Test-Base-0.50/t/sample-file.txt
    Test-Base-0.50/t/simple.t
    Test-Base-0.50/t/skip.t
    Test-Base-0.50/t/slice.t
    Test-Base-0.50/t/sort-deep.t
    Test-Base-0.50/t/sort.t
    Test-Base-0.50/t/spec1
    Test-Base-0.50/t/spec2
    Test-Base-0.50/t/spec_file.t
    Test-Base-0.50/t/spec_string.t
    Test-Base-0.50/t/split-deep.t
    Test-Base-0.50/t/split-regexp.t
    Test-Base-0.50/t/split.t
    Test-Base-0.50/t/strict-warnings.t
    Test-Base-0.50/t/strict-warnings.test
    Test-Base-0.50/t/strict.t
    Test-Base-0.50/t/subclass-autoclass.t
    Test-Base-0.50/t/subclass-import.t
    Test-Base-0.50/t/Subclass.pm
    Test-Base-0.50/t/subclass.t
    Test-Base-0.50/t/subclass_late.t
    Test-Base-0.50/t/tail.t
    Test-Base-0.50/t/Test-Less/
    Test-Base-0.50/t/Test-Less/index.txt
    Test-Base-0.50/t/TestA.pm
    Test-Base-0.50/t/TestB.pm
    Test-Base-0.50/t/TestBass.pm
    Test-Base-0.50/t/TestC.pm
    Test-Base-0.50/t/tie_output.t
    Test-Base-0.50/t/trim.t
    Test-Base-0.50/t/unchomp.t
    Test-Base-0.50/t/use-test-more.t
    Test-Base-0.50/t/write_file.t
    Test-Base-0.50/t/xxx.t
    Test-Base-0.50/t/yaml.t
    Test-Base-0.50/t/zero-blocks.t
    Test-Base-0.50/ToDo
    Removing previously used /Users/dspeirs/.cpan/build/Test-Base-0.50
    CPAN.pm: Going to build I/IN/INGY/Test-Base-0.50.tar.gz
    Checking if your kit is complete...
    Looks good
    Warning: prerequisite Spiffy 0.30 not found.
    Warning: prerequisite Test::More 0.62 not found. We have 0.47.
    Writing Makefile for Test::Base
    ---- Unsatisfied dependencies detected during [I/IN/INGY/Test-Base-0.50.tar.gz] -----
    Test::More
    Spiffy
    Shall I follow them and prepend them to the queue
    of modules we are processing right now? [yes]
    Running make test
    Delayed until after prerequisites
    Running make install
    Delayed until after prerequisites
    Running install for module Test::More
    Running make for M/MS/MSCHWERN/Test-Simple-0.62.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/M/MS/MSCHWERN/Test-Simple-0.62.tar.gz ok
    Test-Simple-0.62/
    Test-Simple-0.62/Changes
    Test-Simple-0.62/lib/
    Test-Simple-0.62/lib/Test/
    Test-Simple-0.62/lib/Test/Builder/
    Test-Simple-0.62/lib/Test/Builder/Module.pm
    Test-Simple-0.62/lib/Test/Builder/Tester/
    Test-Simple-0.62/lib/Test/Builder/Tester/Color.pm
    Test-Simple-0.62/lib/Test/Builder/Tester.pm
    Test-Simple-0.62/lib/Test/Builder.pm
    Test-Simple-0.62/lib/Test/More.pm
    Test-Simple-0.62/lib/Test/Simple.pm
    Test-Simple-0.62/lib/Test/Tutorial.pod
    Test-Simple-0.62/Makefile.PL
    Test-Simple-0.62/MANIFEST
    Test-Simple-0.62/META.yml
    Test-Simple-0.62/README
    Test-Simple-0.62/t/
    Test-Simple-0.62/t/00signature.t
    Test-Simple-0.62/t/00testharnesscheck.t
    Test-Simple-0.62/t/bad_plan.t
    Test-Simple-0.62/t/bail_out.t
    Test-Simple-0.62/t/buffer.t
    Test-Simple-0.62/t/Builder.t
    Test-Simple-0.62/t/circular_data.t
    Test-Simple-0.62/t/create.t
    Test-Simple-0.62/t/curr_test.t
    Test-Simple-0.62/t/details.t
    Test-Simple-0.62/t/diag.t
    Test-Simple-0.62/t/eq_set.t
    Test-Simple-0.62/t/exit.t
    Test-Simple-0.62/t/extra.t
    Test-Simple-0.62/t/extra_one.t
    Test-Simple-0.62/t/fail-like.t
    Test-Simple-0.62/t/fail-more.t
    Test-Simple-0.62/t/fail.t
    Test-Simple-0.62/t/fail_one.t
    Test-Simple-0.62/t/filehandles.t
    Test-Simple-0.62/t/fork.t
    Test-Simple-0.62/t/harness_active.t
    Test-Simple-0.62/t/has_plan.t
    Test-Simple-0.62/t/has_plan2.t
    Test-Simple-0.62/t/import.t
    Test-Simple-0.62/t/isdeeplyfail.t
    Test-Simple-0.62/t/is_fh.t
    Test-Simple-0.62/t/lib/
    Test-Simple-0.62/t/lib/NoExporter.pm
    Test-Simple-0.62/t/lib/Test/
    Test-Simple-0.62/t/lib/Test/Simple/
    Test-Simple-0.62/t/lib/Test/Simple/Catch.pm
    Test-Simple-0.62/t/lib/Test/Simple/sample_tests/
    Test-Simple-0.62/t/lib/Test/Simple/sample_tests/death.plx
    Test-Simple-0.62/t/lib/Test/Simple/sampletests/death_ineval.plx
    Test-Simple-0.62/t/lib/Test/Simple/sample_tests/exit.plx
    Test-Simple-0.62/t/lib/Test/Simple/sample_tests/extras.plx
    Test-Simple-0.62/t/lib/Test/Simple/sampletests/fivefail.plx
    Test-Simple-0.62/t/lib/Test/Simple/sampletests/last_minutedeath.plx
    Test-Simple-0.62/t/lib/Test/Simple/sampletests/onefail.plx
    Test-Simple-0.62/t/lib/Test/Simple/sampletests/pre_plandeath.plx
    Test-Simple-0.62/t/lib/Test/Simple/sample_tests/require.plx
    Test-Simple-0.62/t/lib/Test/Simple/sample_tests/success.plx
    Test-Simple-0.62/t/lib/Test/Simple/sampletests/toofew.plx
    Test-Simple-0.62/t/lib/Test/Simple/sampletests/too_fewfail.plx
    Test-Simple-0.62/t/lib/Test/Simple/sampletests/twofail.plx
    Test-Simple-0.62/t/lib/TieOut.pm
    Test-Simple-0.62/t/maybe_regex.t
    Test-Simple-0.62/t/missing.t
    Test-Simple-0.62/t/More.t
    Test-Simple-0.62/t/no_diag.t
    Test-Simple-0.62/t/no_ending.t
    Test-Simple-0.62/t/no_header.t
    Test-Simple-0.62/t/no_plan.t
    Test-Simple-0.62/t/ok_obj.t
    Test-Simple-0.62/t/output.t
    Test-Simple-0.62/t/overload.t
    Test-Simple-0.62/t/overload_threads.t
    Test-Simple-0.62/t/plan.t
    Test-Simple-0.62/t/plan_bad.t
    Test-Simple-0.62/t/planisnoplan.t
    Test-Simple-0.62/t/plannoplan.t
    Test-Simple-0.62/t/planshouldntimport.t
    Test-Simple-0.62/t/planskipall.t
    Test-Simple-0.62/t/require_ok.t
    Test-Simple-0.62/t/reset.t
    Test-Simple-0.62/t/simple.t
    Test-Simple-0.62/t/skip.t
    Test-Simple-0.62/t/skipall.t
    Test-Simple-0.62/t/sort_bug.t
    Test-Simple-0.62/t/tbt_01basic.t
    Test-Simple-0.62/t/tbt_02fhrestore.t
    Test-Simple-0.62/t/tbt_03die.t
    Test-Simple-0.62/t/tbt04linenum.t
    Test-Simple-0.62/t/tbt_05faildiag.t
    Test-Simple-0.62/t/tbt_06errormess.t
    Test-Simple-0.62/t/tbt_07args.t
    Test-Simple-0.62/t/thread_taint.t
    Test-Simple-0.62/t/threads.t
    Test-Simple-0.62/t/todo.t
    Test-Simple-0.62/t/undef.t
    Test-Simple-0.62/t/use_ok.t
    Test-Simple-0.62/t/useing.t
    Test-Simple-0.62/TODO
    Removing previously used /Users/dspeirs/.cpan/build/Test-Simple-0.62
    CPAN.pm: Going to build M/MS/MSCHWERN/Test-Simple-0.62.tar.gz
    NOTE: There have been API changes between this version and any older
    than version 0.48! Please see the Changes file for details.
    NOTE: The behavior of Test::More and threads has changed between this
    version and any older than version 0.48! Please see the Changes file
    for details.
    WARNING: LICENSE is not a known parameter.
    Checking if your kit is complete...
    Looks good
    'LICENSE' is not a known MakeMaker parameter name.
    Writing Makefile for Test::Simple
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module Spiffy
    Running make for I/IN/INGY/Spiffy-0.30.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/I/IN/INGY/Spiffy-0.30.tar.gz ok
    Spiffy-0.30/
    Spiffy-0.30/Changes
    Spiffy-0.30/inc/
    Spiffy-0.30/inc/Module/
    Spiffy-0.30/inc/Module/Install/
    Spiffy-0.30/inc/Module/Install/Base.pm
    Spiffy-0.30/inc/Module/Install/Can.pm
    Spiffy-0.30/inc/Module/Install/Fetch.pm
    Spiffy-0.30/inc/Module/Install/Makefile.pm
    Spiffy-0.30/inc/Module/Install/Metadata.pm
    Spiffy-0.30/inc/Module/Install/Win32.pm
    Spiffy-0.30/inc/Module/Install/WriteAll.pm
    Spiffy-0.30/inc/Module/Install.pm
    Spiffy-0.30/lib/
    Spiffy-0.30/lib/Spiffy.pm
    Spiffy-0.30/Makefile.PL
    Spiffy-0.30/MANIFEST
    Spiffy-0.30/META.yml
    Spiffy-0.30/README
    Spiffy-0.30/t/
    Spiffy-0.30/t/autoload.t
    Spiffy-0.30/t/base.t
    Spiffy-0.30/t/base2.t
    Spiffy-0.30/t/cascade.t
    Spiffy-0.30/t/const.t
    Spiffy-0.30/t/early.t
    Spiffy-0.30/t/export1.t
    Spiffy-0.30/t/export2.t
    Spiffy-0.30/t/export3.t
    Spiffy-0.30/t/export4.t
    Spiffy-0.30/t/export5.t
    Spiffy-0.30/t/export6.t
    Spiffy-0.30/t/export7.t
    Spiffy-0.30/t/exporter.t
    Spiffy-0.30/t/field.t
    Spiffy-0.30/t/field2.t
    Spiffy-0.30/t/field3.t
    Spiffy-0.30/t/filter.t
    Spiffy-0.30/t/filter2.t
    Spiffy-0.30/t/filter3.t
    Spiffy-0.30/t/Filter4.pm
    Spiffy-0.30/t/filter4.t
    Spiffy-0.30/t/Filter5.pm
    Spiffy-0.30/t/filter5.t
    Spiffy-0.30/t/mixin.t
    Spiffy-0.30/t/mixin2.t
    Spiffy-0.30/t/mixin3.t
    Spiffy-0.30/t/new.t
    Spiffy-0.30/t/NonSpiffy.pm
    Spiffy-0.30/t/package.t
    Spiffy-0.30/t/parse.t
    Spiffy-0.30/t/Something.pm
    Spiffy-0.30/t/stub.t
    Spiffy-0.30/t/super.t
    Spiffy-0.30/t/super2.t
    Spiffy-0.30/t/Thing.pm
    Removing previously used /Users/dspeirs/.cpan/build/Spiffy-0.30
    CPAN.pm: Going to build I/IN/INGY/Spiffy-0.30.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Spiffy
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running make for I/IN/INGY/Test-Base-0.50.tar.gz
    Is already unwrapped into directory /Users/dspeirs/.cpan/build/Test-Base-0.50
    CPAN.pm: Going to build I/IN/INGY/Test-Base-0.50.tar.gz
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running make for I/IN/INGY/YAML-0.58.tar.gz
    Is already unwrapped into directory /Users/dspeirs/.cpan/build/YAML-0.58
    CPAN.pm: Going to build I/IN/INGY/YAML-0.58.tar.gz
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module PAR::Dist
    Running make for S/SM/SMUELLER/PAR-Dist-0.08.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/S/SM/SMUELLER/PAR-Dist-0.08.tar.gz ok
    PAR-Dist-0.08/
    PAR-Dist-0.08/inc/
    PAR-Dist-0.08/inc/Module/
    PAR-Dist-0.08/inc/Module/Install.pm
    PAR-Dist-0.08/inc/Module/Install/
    PAR-Dist-0.08/inc/Module/Install/Fetch.pm
    PAR-Dist-0.08/inc/Module/Install/Makefile.pm
    PAR-Dist-0.08/inc/Module/Install/Base.pm
    PAR-Dist-0.08/inc/Module/Install/Metadata.pm
    PAR-Dist-0.08/inc/Module/Install/Can.pm
    PAR-Dist-0.08/inc/Module/Install/WriteAll.pm
    PAR-Dist-0.08/inc/Module/Install/Win32.pm
    PAR-Dist-0.08/Changes
    PAR-Dist-0.08/t/
    PAR-Dist-0.08/t/1-basic.t
    PAR-Dist-0.08/t/0-signature.t
    PAR-Dist-0.08/MANIFEST
    PAR-Dist-0.08/META.yml
    PAR-Dist-0.08/lib/
    PAR-Dist-0.08/lib/PAR/
    PAR-Dist-0.08/lib/PAR/Dist.pm
    PAR-Dist-0.08/Makefile.PL
    PAR-Dist-0.08/README
    PAR-Dist-0.08/SIGNATURE
    Removing previously used /Users/dspeirs/.cpan/build/PAR-Dist-0.08
    CPAN.pm: Going to build S/SM/SMUELLER/PAR-Dist-0.08.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for PAR::Dist
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running install for module Digest::SHA::PurePerl
    Running make for M/MS/MSHELOR/Digest-SHA-PurePerl-5.34.tar.gz
    Checksum for /Users/dspeirs/.cpan/sources/authors/id/M/MS/MSHELOR/Digest-SHA-PurePerl-5.34.t ar.gz ok
    Digest-SHA-PurePerl-5.34/
    Digest-SHA-PurePerl-5.34/Changes
    Digest-SHA-PurePerl-5.34/Makefile.PL
    Digest-SHA-PurePerl-5.34/MANIFEST
    Digest-SHA-PurePerl-5.34/META.yml
    Digest-SHA-PurePerl-5.34/PurePerl.pm
    Digest-SHA-PurePerl-5.34/README
    Digest-SHA-PurePerl-5.34/shasum
    Digest-SHA-PurePerl-5.34/SIGNATURE
    Digest-SHA-PurePerl-5.34/t/
    Digest-SHA-PurePerl-5.34/t/0-pod-coverage.t
    Digest-SHA-PurePerl-5.34/t/0-pod.t
    Digest-SHA-PurePerl-5.34/t/1-exist.t
    Digest-SHA-PurePerl-5.34/t/1-hello-world.t
    Digest-SHA-PurePerl-5.34/t/2-nist-sha-1.t
    Digest-SHA-PurePerl-5.34/t/2-nist-sha-224.t
    Digest-SHA-PurePerl-5.34/t/2-nist-sha-256.t
    Digest-SHA-PurePerl-5.34/t/2-nist-sha-384.t
    Digest-SHA-PurePerl-5.34/t/2-nist-sha-512.t
    Digest-SHA-PurePerl-5.34/t/2-nist-sha-base64.t
    Digest-SHA-PurePerl-5.34/t/2-nist-sha-oo.t
    Digest-SHA-PurePerl-5.34/t/2-nist-vectors-bit.t
    Digest-SHA-PurePerl-5.34/t/2-nist-vectors-byte.t
    Digest-SHA-PurePerl-5.34/t/3-gillogly-easy.t
    Digest-SHA-PurePerl-5.34/t/3-gillogly-hard.t
    Digest-SHA-PurePerl-5.34/t/4-bitstr-increasing.t
    Digest-SHA-PurePerl-5.34/t/4-bitstr-large.t
    Digest-SHA-PurePerl-5.34/t/4-bitstr-random.t
    Digest-SHA-PurePerl-5.34/t/5-hmac-fips198.t
    Digest-SHA-PurePerl-5.34/t/5-hmac-rfc2202.t
    Digest-SHA-PurePerl-5.34/t/5-hmac-sha-256.t
    Digest-SHA-PurePerl-5.34/t/5-hmac-woodbury.t
    Digest-SHA-PurePerl-5.34/t/6-dump-load.t
    Digest-SHA-PurePerl-5.34/t/7-ireland.t
    Digest-SHA-PurePerl-5.34/t/gillogly/
    Digest-SHA-PurePerl-5.34/t/gillogly/state.011
    Digest-SHA-PurePerl-5.34/t/gillogly/state.110
    Digest-SHA-PurePerl-5.34/t/nist/
    Digest-SHA-PurePerl-5.34/t/nist/bit-hashes.sha1
    Digest-SHA-PurePerl-5.34/t/nist/bit-messages.sha1
    Digest-SHA-PurePerl-5.34/t/nist/byte-hashes.sha1
    Digest-SHA-PurePerl-5.34/t/nist/byte-messages.sha1
    Digest-SHA-PurePerl-5.34/t/nist/COPYRIGHT
    Digest-SHA-PurePerl-5.34/t/nist/Readme.txt
    Digest-SHA-PurePerl-5.34/t/state/
    Digest-SHA-PurePerl-5.34/t/state/state.1
    Digest-SHA-PurePerl-5.34/t/state/state.256
    Digest-SHA-PurePerl-5.34/t/state/state.384
    Digest-SHA-PurePerl-5.34/t/state/state.512
    Removing previously used /Users/dspeirs/.cpan/build/Digest-SHA-PurePerl-5.34
    CPAN.pm: Going to build M/MS/MSHELOR/Digest-SHA-PurePerl-5.34.tar.gz
    Checking if your kit is complete...
    Looks good
    Writing Makefile for Digest::SHA::PurePerl
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    Running make for A/AU/AUTRIJUS/Module-Signature-0.53.tar.gz
    Is already unwrapped into directory /Users/dspeirs/.cpan/build/Module-Signature-0.53
    CPAN.pm: Going to build A/AU/AUTRIJUS/Module-Signature-0.53.tar.gz
    -- NOT OK
    Running make test
    Can't test without successful make
    Running make install
    make had returned bad status, install seems impossible
    cpan>

  • Non-blocking and terminating processes

    Can someone give me an example of using the host.nonblocking to terminate a process or a window that is opened using a webutil_file_Transfer.DB_To_Client when finished using the opened document.
    I am using oracle 10g developer:
    Thanks

    "non-blocking port" and "1:1 oversubscription" are the same.    It's also the same when you are saying "line rate".  

  • HT5639 How to stop a Terminal process when a file becomes to large?

    I was making a terminal program to produce a txt file with incrementing numbers every line. But do to time and size I had wished the program to stop when it produced a txt file larger than 1GB here is the code I was using.
    #!/bin/bash
    main()
        cd ~/desktop
        a=0
        b=1
        a=`expr $a + 1`
        echo $a
        echo $a >> count.txt
        run
    count()
        b= du -skL count.txt  > /dev/null       ///// problem here //// run it with out the comment to see how
        a=`expr $a + 1`
        clear
        echo "#"$a "-" $b"KB"
        echo $a >> count.txt
    run()
        cd ~/desktop
        while [ $b -lt 1048576 ]
        do
            count
        done
    main

    There is no need to post the same question more than once.
    https://discussions.apple.com/thread/5209171?tstart=0
    You could try posting in the developer forum https://discussions.apple.com/community/developer_forums

  • BADI triggered from Portal for Termination process

    Hi,
    I have the requirement to check for User parameters and verify data while a PERNR is terminated from Portal side.
    To do this I will need a BADI which is triggered from Portal.
    I have got a couple of BADIs but not sure which one to use. Anyone has come across such requirement?
    Also I need to filter values for F4 help depending on the authorization in Portal -> Personal info->Additional details.
    I need to put filter on the Subtypes available.
    I was thinkling of using WD_BADI to implement this.
    but there is very few help available for this BADi. Has anyone ever used this?
    ags.

    put an external break point on CL_EXITHANDLER->GET INSTANCE method.
    now start your portal.
    each time an exit/badi is available, the debugger will start. this way you can check the exact BADI as exact position.

  • Terminating Process programatically

    Hi All,
    Im working on NWDS 7.1 and EP CE 7.1.
    Im trying to terminate a process programatically on click of a button.
    I have used following code:
    public void stopProcess( java.sql.Date startDate, java.sql.Date endDate )  {
        //@@begin stopProcess()
           IGPRuntimeManager rtm = GPProcessFactory.getRuntimeManager();
           try {
              IWDClientUser wdUser = WDClientUser.getCurrentUser();
                IUser user = wdUser.getSAPUser();
              IGPProcessInstanceInfo[] instanceInfo = rtm.getRunningInstances(0, startDate, endDate, user);
                 for(int i=0;i<=instanceInfo.length;i++)
                     String instanceId = instanceInfo<i>.getProcessInstanceID();
                     IGPProcessInstance instance = rtm.getProcessInstance(instanceId, user);
                     rtm.stopProcess(instance, user);
         } catch (WDUMException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
         } catch (GPEngineException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
         } catch (GPInvocationException e) {
              // TODO Auto-generated catch block
              e.printStackTrace();
        //@@end
    Here im facing array out of bound exception in the highlighted piece of code.
    There is no processInstanceInfo being retrieved by IGPProcessInstanceInfo[] instanceInfo = rtm.getRunningInstances(0, startDate, endDate, user);.
    Its returning no values to the array, as array size is coming '0'.
    The date parameters that are being passed are system date in both 'startDate' and 'endDate'.
    Please guide where i may be going wrong.
    Thanks and Regards,
    Sakshi

    UserID is giving vales.
    I got following result for UserId:
    user:Message buffer: No messages available.Transient data: *************************************************************************** * com.sap.security.core.persistence.imp.PrincipalDatabag Fri Oct 03 14:50:04 GMT05:30 2008 * UniqueID: USER.PRIVATE_DATASOURCE.un:sakshi * Type: USER * Home data source: PRIVATE_DATASOURCE * Private id part: un:sakshi * * Existence not checked. * * "com.sap.security.core.usermanagement"|->"j_authscheme" (no time limit)="basicauthentication" * "com.sap.security.core.usermanagement"|->"MYSAPSSO2_STRING" (no time limit)="AjExMDAgAA1wb3J0YWw6c2Frc2hpiAATYmFzaWNhdXRoZW50aWNh... (total length: 480 characters)" *************************************************************************** Persistent data: *************************************************************************** * com.sap.security.core.persistence.imp.PrincipalDatabag Fri Oct 03 14:50:04 GMT05:30 2008 * UniqueID: USER.PRIVATE_DATASOURCE.un:sakshi * Type: USER * Home data source: PRIVATE_DATASOURCE * Private id part: un:sakshi * * Principal exists. * * Direct parents: * GRUP: GRUP.SUPER_GROUPS_DATASOURCE.EVERYONE *       GRUP.PRIVATE_DATASOURCE.un:BHDEV *       GRUP.PRIVATE_DATASOURCE.un:BHCAF *       GRUP.SUPER_GROUPS_DATASOURCE.AUTHENTICATED_USERS * ROLE: ROLE.PCD_ROLE_PERSISTENCE.7sHfAddCGAYvmQzBoQspGBsYBAg= * "com.sap.portal.dsm"|->"DebugControlFlag" (no time limit)= * "com.sap.security.core.usermanagement"|->"lastname" (no time limit)="sakshi" * "com.sap.security.core.usermanagement"|->"accessibilitylevel" (no time limit)= * "com.sap.security.core.usermanagement"|->"locale" (no time limit)= * "com.sap.security.core.usermanagement"|->"uniquename" (no time limit)="sakshi" * "com.sap.security.core.usermanagement"|->"timezone" (no time limit)= * "com.sap.security.core.usermanagement"|->"firstname" (no time limit)= * "com.sap.security.core.usermanagement"|->"email" (no time limit)="" * "com.sap.security.core.usermanagement"|->"salutation" (no time limit)= * "com.sap.security.core.usermanagement"|->"displayname" (no time limit)= * "com.sap.security.core.usermanagement"|->"company" (no time limit)= * "com.sap.security.core.usermanagement"|->"APPROVAL_REQUEST_COMPANYID" (no time limit)= * "$serviceUser$"|->"SERVICEUSER_ATTRIBUTE" (no time limit)= * "com.sapportals.portal.navigation"|->"uipmode" (no time limit)= ***************************************************************************
    Its giving value, not NULL.
    Regards,
    Sakshi

  • Alternative step on Biztalk "terminator" process, regarding disabling all sql server jobs prior to running.

    I am getting errors in one of the BT jobs, they recommend running a terminator tool available from MS ... One of the requirements is to disable all the sql server jobs, my question is: Can I just stop the sql server agent? Or this won't do it ....
    Thanks
    Bico Bielich

    Hi,
    I assume that you are talking about issue identified by Monitor BizTalk Server job.
    Why you want to stop the sql server agent? There could be other Non-BizTalk jobs running too.
    You just need to make sure that you have a BizTalk Backup of your databases, all the BTS hosts have been stopped,
    BTS SQL Agent jobs have been disabled.
    Refer: 
    http://blogs.msdn.com/b/biztalkcpr/archive/2011/02/10/using-biztalk-terminator-to-resolve-issues-identified-by-biztalk-msgboxviewer.aspx
    Pls follow the link and perform action based on the respective issue reported by the
    Monitor BizTalk Server job.
    Rachit

  • Repairing/Repeating Terminated Processes - Process Chains

    Hi,
    Can any one please explain me with a simple example about repeat and repair in case of process chain.
    I’ve referred http://help.sap.com/saphelp_nw04s/helpdata/en/f3/0d4a975f450443be900e89a47ad48e/content.htm but yet I am not very clear about the two.
    Which option do we use under what circumstances?
    Thank you,
    sam

    Hi Sam,
    Normally with Repeat option next processes automatically trigger. But after manual update u should do them manually.
    Check this Function module.
    Look into this FM - RSPC_PROCESS_FINISH and execute with G(complete) this will start the next process automatically without doing anything manually.
    or
    Go to the plan view of that chain, in trasaction field enter '=copy', it asks for the name and description, then u remove the processes which r already ran, connect a start process to which r yet to run ( means to the first process in that). select the immediate option in maintain variant for start process then trigger it.
    Hope the following links will give u a clear idea about process chains and clear ur doubts.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
    Business Intelligence Old Forum (Read Only Archive)
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    Siggi's weblogs for data load error and how to restart process chain
    /people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
    /people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
    Hope this helps.
    Regrads,
    Ravikanth

  • Repairing/Repeating Terminated Processes

    hello
    when do you go for repairing or repeating a load..
    pls do furnish with some example.
    points for sure
    thanks
    GVS

    Hi Venkat subramaniyam,
    When you are using Delta type of update method and also when it fails ,We use the Repeat Delta option to make sure
    it get only Delta records
    When you are using Full update and when it got failed,you use
    Repair Full Request .
    We can change full update request into Repair full request by
    runing rssm_SET_REPAIR_FULLREQUEST
    we use this because there may be scenario where we cannot use delta and Full update in same ODS
    Please go through the links
    [Full repair request|I have a little confusion regarding Full Repair request scenario.;
    [Difference between Reconstruction and Repet|Difference between reconstruction and repeat delta;
    [Repeat Delta|repeat delta ...;
    Hope i have answered your question

  • Java.lang.Process  - detecting process termination asynchronously

    Hi All,
    I was wondering if there is anyway to know when a Process (run with Runtime.exec()) has terminated without dedicating a thread per Process and using waitFor().
    The reason I want this is that I have an application running many such processes concurrently, and I wouldn't want to dedicate a thread for each process to detect its termination.
    What I would REALLY like is something like the asynchronous IO 'select' method so that a single thread can block until one of a set of processes terminates.
    Polling would not be as good, but also a viable alternative. However, the only way I could see is calling exitValue() periodically on all Process objects - this would mean getting IllegalThreadStateExceptions thrown galore, as long as the process doesn't terminate. This is both ugly and inefficient (makes the penalty for polling even worse - we generate an exception for each non-terminated process polled...).
    Does anyone have any tips I can use to implement some sort of solution?
    Thanks,
    Ophir.

    >
    What's the requirement for detecting the completed
    processes? I'm not really sure why the Thread per
    process version wasn't acceptable. How many processes
    are there?
    Well... it's an application server, and I'm providing a generic capability. Theoretically, it could be hundreds of processes.
    Also, did you make sure that the Process Object is
    indeed not collectable until the process is complete?I have to say I was pretty skeptical about this myself... ;)
    I have made the test as well as I know: I ran a long running process, and then terminated it with 'kill'.
    I also ran 'sleep 60' to see what happens on normal termination.
    I saw nothing added to the queue while the process was up, and immediate enqueuing after process termination.
    I guess there's no way of making ABSOLUTELY sure this works but if it didn't become collectable 20 consecutive times when up, and became collectable immediately when terminated, that's pretty strong circumstancial evidence...
    Still I just wish there was a neater, tighter solution (though, using your hack, I'm going to get a lot of admiration from some of the people around here - they don't need to know where I got it...).

  • Process terminated by signal 11 (abap dump) connecting to remote database

    Hi
    We are currently running 4.7 Enterprise on Oracle 9.2.0.6.0 and frequently connect to another remote (non SAP) oracle database using the following statements:
    exec sql.
    connect to 'remote'
    endexec.
    The remote system is set up in SAP using view DBCON.
    This works pretty well but we have started to see an increasing number of terminations "Process terminated by signal 11"
    I suppose I have two questions
    1. Can we modify our abap to catch this exception (this would let us try again or exit gracefully)
    2. Does anyone know the cause of this exception or where to look to find the cause
    Many thanks for your help.
    Simon

    Fixed at last - an update to the Oracle client / libaries I think was what cured it in the end. Phew
    Thanks

  • Mass termination in HCM Processes and Forms

    Hi everyone,
    Is mass termination possible within the HCM Processes and Forms framework? Usually the framework is per employee. Has anyone got it working for mass employees or org units?
    I'm leaning more on Web Dynpro development for the mass terminations.
    Thanks!

    Hi Chris,
    Can you please give me more details on how to set up the Mass termination process in HCM.  I try to built LSMW through PA40, but it did not work out.  Can you give me more details on what are steps for the configuation.  IF the process includes any ABAP requirement, please let me know, I have to talk to my ABAPer.
    Thank you in advance
    Regards
    Chinna
    Message was edited by: Chinna Gogineni

Maybe you are looking for

  • What is a sparse bundle?

    I purchased the AirPort Time Capsule and a new iMac.  I also have 2 old MacBooks (the white ones) that are about 8 years old with old operating systems.  I created a network using the Airport Time Capsule, and now I am trying to access the content fr

  • Document saving as repeated files: cannot delete?

    I have made a simple word document on Pages, that I conitue to work at a little each day. Currently there are 56 document under this name that I cannot delete.  When I try to open it, it says: The alias "EOSC Study Questions" can't be opened because

  • Video gets SOFT after using export/ media/match sequence settings

    Never had this on any other version of PP.  PC based 64bit Win 7 EX: I get a job delivered to me that was shot on mini dv (now on a HD) & the clips are all seperated as they were shot. I put them on the TL & want to make 1 long clip out of them. I ex

  • Canon HFS10 import settings for FCP3

    Hello, I have imported the .mts files from my Canon HFS10 but it has a horrible 'interlacing' effect that is totally unacceptable. So clearly I have made a mistake. Does anyone know the settings required to import from my HFS10 at top quality? I have

  • How to automatically "get info" for MP3s?

    I drag and drop MP3s into iTunes. I like being able to stop a podcast (MP3) then later have it pick up where I stopped. To this though, I have to right click every MP3 individually, select Options then "Remember playback position". Is there a way to