Termination workbench and its processes

Hi Gurus,
I would like to know about Termination workbench and its processes.
Thanks,
Prabha

Hi,
The Termination Workbench computes the various types of payments due to, or payable by the employee at the time of termination. For example, Gratuity, Superannuation, Leave Encashment or any pending Reimbursable allowances.
The termination of employment may be due to the:
u2022     Resignation of an employee
u2022     Retirement of an employee
u2022     Voluntary retirement or premature retirement by an employee
For information on setting up the Termination Workbench functionality in the SAP R/3 system, refer to the IMG under Payroll India  Termination Workbench.
The Termination Workbench comprises the following processes:
-Termination Transaction (PC00_M40_TERM) - Using this transaction you can specify the details of employee Gratuity, Superannuation, Leave Encashment, Voluntary Retirement Services, and Reimbursable Allowances.
The transaction reads the relevant infotypes and determines the amounts payable to the employee. For example, amounts payable as Gratuity, Superannuation, Notice Pay, and Leave Encashment. You can modify these amounts using the transaction. When you execute the transaction, it updates the relevant wage types in the Additional Payments Infotype (0015). This transaction also creates a batch session for delimiting the infotype records.
For more information, refer to Termination Transaction (PC00_M40_TERM)
-Batch Input Monitoring Transaction (SM35) u2013 Using this transaction, you can execute the batch session created by the Termination Transaction (PC00_M40_TERM). Upon execution, the batch session delimits the infotypes configured for delimiting, in the infogroup. For more information on configuring the infogroup, refer to the IMG under Payroll India -Termination Workbench  Define Infogroups.
The batch session also delimits the employee in the Actions Infotype (0000).
-Payroll u2013 when you execute the payroll for the period in which the employee was terminated, the payroll processes the amounts payable at the time of termination. For example, Notice Pay, Gratuity, Superannuation, and Leave Encashment. The payroll also calculates the applicable exemptions

Similar Messages

  • How to close Terminal Windows and terminate processes with Applescript?

    I'm trying to quit the Terminal via AppleScript. I need to run 4 different Terminal scripts on a server but would also need to restart this server every day automatically... and my favorite choice would be to do this properly.
    I suceeded terminating all other applications, cleaning folders and sending messages, but I did not find a solution quitting the Terminal!
    When I tell it to quit, it asks if I want to terminate all processes, even if I use the "ignoring application responses" command. The Terminal gets stuck on that dialog box and one has to manually hit "Terminate".
    Anyone knows about a solution how to avoid this prompt or how to default "Terminate"? There must be something like "close window 1 with process terminate", or?
    Many thanks in advance!

    :-))) Sometimes the answer is so easy... Thanks a lot!

  • How to create payment mode in jsp and its process

    How to create payment mode and validate creditcard number
    plz anyone tel the process?

    can you be more specific

  • Termination Workbench how will it work and factors.

    Hi,
    Termination Workbench how will it work and what are the factors need to consider at the time of implementation.
    Regards,
    BusinessSuite.

    Hi,
    When we are implementing the Termination Workbench we have to consider the following activies.
    Purpose
    This component helps in terminating an employee from the payroll.
    The Termination Workbench computes the various types of payments due to, or payable by the employee at the time of termination. For example, Gratuity, Superannuation, Leave Encashment or any pending Reimbursable allowances.
    The termination of employment may be due to the:
    Resignation of an employee
    Retirement of an employee
    Voluntary retirement or premature retirement by an employee
    Integration
    1.Contract Elements info type (0016) u2013 Where you maintain the details of the employment contract, between the company and the employee. Termination Workbench determines the notice period for termination using this info type.
    2.Date Specifications info type (0041) u2013 Where you maintain the date of Normal Retirement of the employee. Termination Workbench computes the relief on Voluntary Retirement Service benefit for the employee using the data maintained in this info type.
    3.Personal IDs info type (0185) u2013 Termination Workbench obtains the Gratuity and Superannuation Trust details for the employee from the info type.
    4.Additional Payments info type (0015) u2013 After the transaction is complete, Termination Workbench updates the payment records in the Additional Payments info type (0015). The updated amounts are disbursed to the employee through the payroll run, along with other components of the salary.
    5.Actions info type (0000) u2013 When an employee is terminated using the Termination Workbench, the Termination Workbench delimits the employee in the Actions info type (0000).
    Features
    The Termination Workbench comprises of the following processes:
    Termination transaction (PC00_M40_TERM)- Using this transaction you can specify the details of employee Gratuity, Superannuation, Leave Encashment, Voluntary Retirement Services and Reimbursable Allowances.
    The transaction reads the relevant info types and determines the amounts payable to the employee. For example, amounts payable as Gratuity, Superannuation, Notice Pay and Leave Encashment. You can modify these amounts using the transaction. When you execute the transaction, it updates the relevant wage types in the Additional Payments info type (0015). This transaction also creates a batch session for delimiting the info type records.
    Batch Input monitoring transaction (SM35) u2013 Using this transaction, you can execute the batch session created by the Termination transaction (PC00_M40_TERM). Upon execution, the batch session delimits the info types configured for delimiting, in the info group.
    The batch session also delimits the employee in the Actions info type (0000). You can set the Return Action Type for Termination Workbench feature (40TRM) for the Action Type to be defaulted in Actions info type (0000) when the info type record gets delimited.
    Payroll u2013 when you execute the payroll for the period in which the employee was terminated, the payroll processes the amounts payable at the time of termination. For example, Notice Pay, Gratuity, Superannuation and Leave Encashment. The payroll also calculates the applicable exemptions.
    Warm Regards,
    Devi.,

  • I just bought a iTunes card and its not accepting it.  It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work.  How can I expedite this process?

    I just bought a iTunes card and its not accepting it.  It already sent it to the support team and they said they were going to get back to my within 24 hours and i am trying to buy a program in the app store for work.  How can I expedite this process?

    Has it been 24 hours?
    I take it this was a gift card.  iTunes Store:  Invalid, Inactive, or Illegible codes http://support.apple.com/kb/TS1292 - gift cards
    I don't know if this provides an alternative means: https://expresslane.apple.com ; select 'iTunes' in the first column; 'iTunes Store' in the second column
    If you are really desperate you could buy the app yourself, then request reimbursement.

  • I tried updating to iOS 8.1 but it have the apple symbol and a blue screen pops up and it restarts the process and its been going on about 3 weeks already. I dont know what to do? Is my iPad broke cause I just got that iPad in August.

    I tried updating to iOS 8.1 but it have the apple symbol and a blue screen pops up and it restarts the process and its been going on about 3 weeks already. I dont know what to do? Is my iPad broke cause I just got that iPad in August.

    Hi You may have a hardware fault take ipad to Apple Store. Ring then first to make an Appointment take box and you purchase paperwork they may give you A replacement. Before you do that Try a Reboot hold down power button & menu button hold both down until you see Apple Logo you may need to hold down for up to 30 Seconds But you may need to do this more than once. If it doesn't work take back to Apple Store. Cheers Brian

  • I have downloaded a fil on itunes through my phone and its been stuck on processing for half an hour what do i do

    i have downloaded a fil on itunes through my phone and its been stuck on processing for half an hour what do i do

    I suggest that you try to use Tiny Umbrella to kick your device out of recovery
    The link to download Tiny Umbrella is shown below
    http://thefirmwareumbrella.blogspot.com/
         On the right hand side of the link you will see links to download Tiny Umbrella
    After downloading and opening tiny umbrella, Click on exit out of recovery. Hope that works for you. If it doesnt work, try to write a detailed description of your problem and what is appearing on your screen etc and we will go from there. Good Luck

  • HT203177 I had to get a new hard drive in my 27 in IMac. I used time machine to get everything back on my computer. I just turn on time machine and its says it's preparing over 800,000 items to back-up, it never back-up, it stop and starts the process ove

    I had to get a new hard drive in my 27 in IMac. I used time machine to get everything back on my computer. I just turn on time machine and its says it's preparing over 800,000 items to back-up, it never back-up, it stop and starts the process over again.

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then repair the backup/TM drive.

  • Are a single ns-slapd process and its 32 LWP (light weight processes) limited or bound to a single processor?

    ns-slapd and its LWP sub-processes seem to appear as a single process in some tools. Does this limit them to only being able to use one of the available processors on a multi-processor system, either due to lock management or for some other reason?
    W see all the CPUs on a four processor system receiving activity, but the system never exceeds 25% utilization, or, the total of a single CPU.
    Is this a limitation, or are we just not using it much yet?

    <i>Are a single ns-slapd process and its 32 LWP (light weight processes) limited or bound to a single processor?</i>
    The short answer:
    No, and you shouldn't need to worry about it anyway.
    The long answer:
    The configuration LDAP is never a bottleneck in an iAS system. You could have hundreds of iAS servers running off a single instance and a single processor LDAP would still be able to handle the configuration requests easily.
    If you also use your LDAP server as an authentication repository, you should size your LDAP server based on your authentication needs. But even if you are using iDS as an authentication store there are several other factors to keep in mind.
    1. iDS scales pretty effectively up to about four CPU's for the most important operations (i.e. reads)
    2. Unless you are running some unusual application server hardware, you will run out of disk i/o long before you run out of CPU power.
    3. If you have any significant load on the directory server you should probably offload it onto its own server (or partition) anyway so that it doesn't steal excessive amounts of memory from that appserver.
    4. Similarly, if you are putting a lot of stress on the directory server with authentications, you should consider tuning the directory server for those authentications.
    I guess a little more detail about your application server architecture would be helpful in figuring out why your CPU doesn't exceed 25%. I strongly doubt that it has anything to do with slapd, however.

  • How can i format my macbook 10.5.8 to snow leopord i am doing first time  format how its process and do i need to formet or upgrade and i have a snow leopard DVD????

    how can i format my macbook 10.5.8 to snow leopord i am doing first time  format how its process and do i need to formet or upgrade and i have a snow leopard DVD???

    First, I'd advise you to make a backup. Time Machine is fine, but I recommend making a bootable backup with Carbon Copy Cloner if possible.
    Then, insert the Snow Leopard DVD (it's a retail version, right? Not a grey disk meant for another machine?) and run the installer on the disk. Should be automatic from that point in. You don't need to reformat your drive.
    Matt

  • I purchased a ipod 5th generation  2 weeks ago and its still processing! how long does it usually take 2 process

    i purchased a ipod 5th generation  2 weeks ago and its still processing! how long does it usually take 2 process??

    See this ungoing discussion:
    https://discussions.apple.com/thread/4384899?tstart=0

  • Help: Process control - kill itself and its phater

    Friends,
    If I use the Process control. Is it possible to use the Process Control 'Cancel workflow' to kill ONLY the actual sub-wf and its phater, without killing its grandfhater ?
    Grandfhater - WF
    Fhater - Sub-WF
    Actual Sub-WF (Using Process control here)
    I want to kill only this actual and its fhater. I want the grandfhader alive and go on.

    Create Container element[like status] in Father SUB-WF and In Actual SUB-WF.
    Based on condition if you want to terminate Actual SUB_WF and Father SUB-WF then set the set container element status = 'X' and then use process control [terminate workflow] this will terminate Actual SUB-WF.
    then do the binding fo container element status from Actual SUB WF to Father SUB WF.
    Then in the father SUB WF check the container element status . if Status = 'X'. then use process control to terminate the Father SUB WF.
    In the process control use terminate workflow.

  • Accessing to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit leaves a fork of the explorer and its children processes !!!

    When I try to access to Windows Server 2003 SP2 R2 32-bit from a Windows XP SP3 32-bit and then closes the RDP from Windows XP (the client side), a fork of the explorer and its children processes will persist in the server side !!!
    Take a look at the screenshot to understand:
    is this normal behavior !?
    Thank you for your understanding ;)

    Hi,
    I think this is normal behavior.
    You just close the RDP from client side but not log off the server, right?
    Regards.
    Vivian Wang
    Yes, right I closed the RDP from client side, not log off the server.

  • Hi,I have uploaded an app build for pre release  and its still under processing So i uploaded a new build but still the issues is not resolved.Please help...Thanks

    Hi,
    I have uploaded an app build for pre release  and its still under processing So i uploaded a new build but still the issues is not resolved.
    Please help...
    Thanks

    Hi smithin, 
    Thanks for visiting Apple Support Communities. 
    It sounds like you've submitted an iOS application to the App Store, which is being processed, but there's an unresolved issue.
    For additional help with this situation, Apple Developers can use the contact methods on this page:
    https://developer.apple.com/contact/
    All the best,
    Jeremy 

  • Process all files in a directory and its subdirectories

    Hello all,
    I want to write a program that processes separately all the files in a given directory. I would like to open folders in that directory (if any) and further process all the files contained in them as well. Any suggestions with some Java code to do this as time effectively as possible? Thanks in advance.

    Hello Chuck,
    thanks for answering. You probably meant: "Search the forum archive - maybe your question has already been discussed. This way you help people focus on topics that have not yet been resolved."
    Generally http://forum.java.sun.com/thread.jspa?forumID=31&threadID=510545 suits well. My problem is however, that I would like to pass the absolute path (not the relative one) of the directory which content (including subdirectories if any) should be further processed. Any suggestions how to make it function with the absolute path passed as input argument to the program?

Maybe you are looking for