Terms and Conditions with a Service Contracts
Hello,
I like to use the Sales Contracts (11.5.10) templates that I created for Sales Quote and Service Contracts. There is a great layout template (XML) for Quoting. I could not find any documentation on how to attach T*Cs to a Service Contract output.
Any help in this direction will be appreciated.
Yes, I did. I had to insert a page break for this. Here is how I have done this
<fo:block break-before="page" >
</fo:block>
Thanks,
Sharmila
Similar Messages
-
In Documents and Receipts for My Verizon and when I select this link to Your eGuide (including the Terms and Conditions of your service) (English) it goes to http://cache.pagefreezer.com/browse/youreguide/14-12-2014T00:00/http://youreguide.vzw.com/ . I use Norton 360 Premier as my antivirus protection and when I select the link Norton 360 says that it has blocked a known Malicious Web Site. Go to the Norton detailed report and it shows that the site pagefreezer.com is known for Phishing Attacks.
This needs to be addressed by Verizon as I don't like to go to web sites that are known for Phishing attacks/Malicious behavior.PageFreezer is a website archiving solution to meet industry compliance requirements.
Verizon Wireless is a PageFreezer customer that uses PageFreezer's capabilities it to archive past copies of the Terms and Conditions of the eGuide website and provide that on the My Verizon section as a service to their customers.
Regards,
PageFreezer Software, Inc.
http://www.pagefreezer.com -
Reading terms and conditions page 3 of new account for iTunes Store before I put in US$ voucher purchased in Zimbabwe. If I'm traveling world wide, willI I still be able to access the US services via this same account?
You can only use the US store if you are in the US with a US billing address on your account - the US store's terms of use (and they will be similar for all countries) :
The iTunes Service is available to you only in the United States, its territories, and possessions. You agree not to use or attempt to use the iTunes Service from outside these locations. Apple may use technologies to verify your compliance. -
Trying to accept icloud terms of service from my MacAir. Step 3 says: "After a moment, the latest iCloud Terms and Conditions should load." They don't. How to pull up terms of sevice when Apple instructions don't work?
Also, are "Terms of Sevice" and "Terms and Conditions" the same document?You can access the store but ...
The Complete Guide to Using the iTunes Store
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location." -
Tried purchasing music from the iTunes Store. When the window popped up I put in my apple id and password. Then I was directed to a 'Terms and Conditions' page. I checked the box next to the 'Yes I agree to these terms and conditions' - then clicked the 'accept' button next page read 'Your Session has timed out. Try again.' with a 'Done' button to click on. Oh the same thing happens when i try to download free iTunes. Yes I have tried & tried it again I even logged off and singed back in-- no joy
After accessing my iTunes account I was not able to change anything like my credit card number when I tried and was sent right to the 'Your session has timed out. Try again.'
The last time I purchased any anything was on September 25th 2011 and the 'terms & conditions' page was last updated on October 12, 2011
Does anyone have an idea to what is going on with my iTunes version 9.2.1 (5) and I can not upgrade to a higher version my iMac does not have the intel processor chip.Thank you for your time and help with this matter. You are greatly appreciatedI am having the same problem also! I posted on here about it, but no one has responded with ideas. I called technical support and e-mailed them, the only suggestions they gave was for the to turn off my firewall. But I didn't change anything, so it shouldn't suddenly stop working. Maybe this is just an iTunes issue? But it doesn't even recognize my account anymore, and I cannot log in now.
If you happen to get an answer, will you please let me know what works for you?
Thanks! -
Terms and Conditions change on 10/15/2014 negatively affecting people with multiple Apple IDs
I have two Apple IDs and purchased songs and videos through iTunes using both IDs. Apparently, Apple has changed the Terms and Conditions for iTunes presumably at 12:01am on 10/15/2014. The most notable change affecting me is related to people with more than one Apple ID. I downloaded some songs on 10/14/2014 from the iCloud to my MacBook Pro which had been purchased a long time ago with my first Apple ID. Early the morning of 10/15/2014, I tried to download songs and videos from the cloud to my MacBook Pro this time using a different Apple ID. When I clicked on the cloud icon by the song or video in iTunes for Mac, I received a pop up message in iTunes stating that I can download past purchases on this computer with just one Apple ID every 90 days. It continues by saying that my computer can be used to download past purchases with a different Apple ID that user cannot download purchases made using a different Apple ID in 90 days.
I have a real problem with this change in Terms and Conditions because Apple is telling me that I'm not allowed to have access to purchases I made until 90 days have passed. These purchases were made prior to Apple's most recent change made to their Terms and Conditions, so they have retroactively restricted my use of media that I purchased legitimately. I've posted on the support page because I would like to have Apple respond to my post and explain their rationale behind making this change. Apple? the floor is yours.Ed. Thanks for your response. I made the assumption that the 90 day restriction had just been put into place because I was working with Apple support earlier on the 14th and was attempting to download content from my original Apple ID so I could back up everything to my computer and overcome the issue caused by having two Apple IDs. During the support call, I was able to log in to iTunes and download previous purchases from the cloud for both of my Apple IDs. When I attempted to do so early this morning, I received the message described above when I logged in to my primary Apple ID and attempted to download the songs I ran out of time to download while on the phone with Apple support. Thanks for the clarification about the policy.
The goal of the Apple support person was to overcome the problem of having two Apple IDs. It would be terrific if Apple came up with a solution for this problem as they have customers like me that would very much like to consolidate all of their purchases under one Apple ID. Restricting access to legitimate purchases for 90 days is a pretty terrible policy to inflict on people that have paid for the use of these songs and videos.
I have to give you a hard time about part of your answer (in good fun). Your answer could be summarized as saying "The best solution to your problem is not to have your problem in the first place." What it means is that the problem is a legitimate problem that doesn't have a good solution. -
In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?
Have you turned the iPad off then back on? That often helps with problems.
-
I want to buy new level from candy crush, but unfortunately apple required to accept terms and condition first before I can buy. But once I click yes no more option to click I agree with the condition. what should I do?
Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
When i try to upgrade iPad, i cannot proceed with terms and conditions page
i forgot my apple ID password when i after i upgrade my ipad. So i changed reset my password online. After i entered new password, terms and conditions page appeared, however there was no response no matter what option i choose be it agree, disagree or A and B.
maybe i accidentally disconnected my ipad with my Mac air at that time? I was not paying attention to that. now i dont konw what i can do.
i do not know the version of the previous system. however i updated as it pompted up that there is a new update.Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I want to use my ipad in a public library.
How can I re start a browser session with safari? I need to do this to use wifi in the library. After accepting terms and conditions it ask me to restart all the browser sessions. But with Ipad it doesnt seem to close totally the application.
Please, help!Try a force quit, I don't know if it closes the sessions but it's worth a try...
When in the app, press on the sleep/wake button until the shutdown screen appears, then press the home button until the app quits. -
Creating a terms and conditions object that is compatible with reader 7
Hi
I'm trying to create a text field to display some terms and conditions. The ideal solution in my scenario is that the terms are displayed in one, read-only, text field with a scroll bar. Simple enough apart from 2 limitations. . the terms need to have formatting, (carriage returns and bullet points minimum), and it must be compatible with adobe reader 7.
To make the scroll bar work in adobe reader 7 I have made the text field's value "user entered" and added validation using javascript to reset the field when any changes are made, but whilst simply copy-pasting from word into the default value box works in adobe reader 9, it does not work when tested using adobe reader 7.
Hope you can help
Thanks
DavidYou can turn off compatibility checking, but more and more of the Google Toolbar will not work. Google is no longer supporting the Google Toolbar so you should use the alternatives.
Hi Mark,
See http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
If you have an aspect that is not covered, indicate what that is; otherwise, expect you to be fully functional within 1-2 weeks.
<br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small> -
So what happens is that I try to accept the terms and conditions of iCloud (and by the way this annoying message keeps popping up every 2 minutes, literally, asking for my iCloud pass for an old account with a non-existent mail) or the ToC you need agree in order to update your software, I press agree and then nothing happens. It just stays there. (I can still update on my computer but I don't know what to do about iCloud)
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try signing out and then back into Settings>iTunes and App Store -
I have installed the new io 7.0, and when it is on the way to configure all functions, after the ICloud, when terms and conditions confirmation apperas, it is stucked
Reset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I am trying to set up my apple tv using the hospital network. I am able to detect the network and chose it. But the way the system works is that you have to agree to the terms and conditions of using their network before access the internet. How do I accomplish this with apple? Please help.
There are some other options to you, if you're not at home and nobody is using your router you could set it up at the hospital, if this isn't an option you could get a second router and use it. Many ethernet routers are available on the cheap, and ethernet cables are cheap too.
Also, a macbook can share it's internet via the built in wifi it has. See this go to settings-sharing-internet sharing and configure as desired. This may require an internet connection via ethernet. But you should be able to create a wifi network for using something like airplay/home sharing. -
Terms and
Conditions
Send by Email
IMPORTANT c.etc.etc.etc. etc etc
A. iCloud terms >
B. Privacy Policy >
;kgj;kvjkbkjb/jb/ljb/jb/skdjvb kjsbkjb
sjk/vb.skjbv.kjbv.kjbvkjbv.kfjdbv.kjbv
.samndb .as b.s, , ß≤ kh.sdv;iyegveiu
etc.etc.
Disagree AgreeReset iPad and continue with update.
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
Maybe you are looking for
-
Must I reconnect to my wireless network EVERY time I want to watch ATV?
This seems like basic stuff to me, but I can't find an answer anywhere, short of calling the support line-.so thought I'd try here first. EVERY time I sit down to view my ATV, if I want to use it outside of what I have synced to it, i.e. in streaming
-
ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used
As the title indicates, I'm having this error during installation. It occurs when I try to install the "Management Studio" part of the program. I've tried a bunch of things like copying to hard drive and installing, but to no avail. To isolate the pr
-
I have both a 3rd generation iTouch and a 5th generation Nano and I can not sync items (audio or video files) from either unit to my iTunes page. I can sync from PC to iPod, though my understanding is that files should move seamlessly both ways right
-
Hi can anyone help or point me in the right direction. I am developing an event management system, part of this is the dynamic creation on name badges which will be printed at the events. I want to do this by exporting all the data as XML then loadin
-
BDM 6 using Office 2010 on Windows 64 Bit Not Working Need Help...?
I've installed BDM6 on my 64bit Windows 7 environment and have found that Desktop Manager cannot find a trace of Office 2010 I then checked the Technical spec and found out that a 64bit system is unsupported... Which I find amusing.... Does anybody