Terms & Conditions PROBLEM

I have a problem with IOS 7 I think.When I want to download a app says cause Terms & Conditions have changed and I taped ''OK''. I read it but there is no Agree or accept button! I can't accept it because is not an agree buton.There says if you agree please accept but there is NO Agree or Accept BUTON! What can I do?

It doesn't work! I tried to reset the ITunes account and the IOS Device but nothing happens! I tried to download another app but after I write my apple ID and my password says '' iTunes Terms & Conditions Have Changed
Before you can proceed you must read & accept the NEW Terms & Conditions'' ''Cancel'' or ''OK'' I tapped ''OK'' and there says me all the new terms & conditions of 74 pages... I red them but when I was on 74 page is no ACCEPT or Agree BUTTON!!! I will try again to see if it works! THANKS ANYWAY!

Similar Messages

Terms & Conditions problem in App Store

I want to install a free app on my Iphone. But every time that I try, app store show me a message of "Terms & Conditions have changed.." that I should agree. I have agreed around 15 times and I still can't download the app. Can anybody help me?

I'm using the Guatemala itunes store with a Guatemalan credit card, and i have downloaded about 40 aplications since april 09' and never with a problem, until this monday, that every time i try it shows me that "Terms & Conditions have change"
Yo estoy en las mismas, y es que ni en la compu me deja bajar ninguna sola aplicacion, ni menos en el iphone.
Lo raro es que probe bajar una aplicacion gratis en mi ipod touch y si me dejo, y otro cuate con otra cuenta probamos y en la cuenta de él si puede descargar todas las aplicaciones. hay me cuentan si saben algo...

Can't view terms & conditions in app store when trying to update apps

When trying to update my apps, I get a notification that says:
iTunes Terms & Conditions Have Changed
Before you can proceed you must read & accept the new Terms & Conditions
I am given the options "Cancel" and "OK". Upon clicking "OK", however, the Terms & Conditions do not show up. Instead, I am just back at the screen that shows my available updates.
Please note that this issue is different from other issues that say they cannot update apps because of this pop-up; their situation is that the Terms & Conditions show, and they are given an option to accept the Terms & Conditions, but upon doing so and trying to update the apps again, they are prompted with the same message. I am completely unable to view the Terms & Conditions entirely.
This may or may not have to do with another minor issue I'd been experiencing where certain applications do not allow me to switch to or from the application. For example, whenever I receive a text notification pop-up, clicking "View" or "Reply" will simply close the window but it will remain on the window that I am currently on and will not switch to the text messaging app. This also seems to be the case when a notification occurs in the notification center and upon clicking on the notification, nothing happens. This only happens to select applications, not all of them.
I am currently running on iOS 6.1.3 on a 16GB iPhone 5 with Verizon Wireless as my provider.

I agree with you. I have just encountered the exact same problem and it's frustrating. It's a bug.
Opening iTunes didn't solve the issue in my case.
Here's a description of the problem and the solution I found:
Problem
1. Opened the App store
2. Logged into my account
3. Clicked on the download link for the app in question — was presented with the dialogue that I should accept the terms and conditions etc — and pressed OK.
4. Nothing happens. Repeated step 3 many times but nothing happened.
Solution
1. Quit App store
2. Launch App store again and repeat step 3 above.
3. The terms and conditions will appear on the screen for you to accept and you can then proceed with your download/purchase.

Print Terms & Conditions in the Back page in Sapscript

Hello Experts,
I need your help.
I have one sapscript. I want print Terms&Conditions in the back page.
My Sapscript is a copy of MEDRUCK.
I want: When NACHA = 1 --> Print Terms&Conditions on the reverse side of each page.
When NACHA = 5 --> Print Terms & Conditions in the last page (Not in the back).
I did one example of sapscript with only one page First. I created a second page Back.
The first point at Back and has the print mode 'D'.
The Back point at First and doesn't has any print mode.
My problem is:
1- Always, i have the last page without Back page. Always i have an odd number of pages. Normally i must have a peer number. Each page has the back page. But, is not the result.
I tried to call NEW-PAGE BACK at the end of the last page First like that:
If &NEXTPAGE = 0&
NEW-PAGE BACK
Endif.
But doesn't work. NEW-PAGE works only in the Window Main and &NEXTPAGE& = 0 works only in a window not main. So, i can't use them at the same time, in the same window.
Can any one help me please? I'm blocked and i can't resolve the problem?
And what i must do for NACHA = 5?
Thank you.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Aug 15, 2008 4:59 PM

Hi,
This problem is caused by the printer which does not understand the sapscript page commands. Basically you need to embed printer specific commands for controlling output so that on particular conditions the output in printed double sided for the first 2 pages then each page single sided.
This is not easy, and can change depending on the printer being used. I would not recommend this type of action in SAPscript or SMARTforms.
Cheers
David Cooper

How to provide terms & conditions option while installing an AIR application

Hi
I have an AIR application which is developed using flex SDK. I have got an requirement that when the user tries to install the AIR application, I need to display the terms & conditions details. If the user accepts the terms & conditions, it need to be install the application. Is it possible to do?
And also i need to set the expiration date (i.e. trial period) so the application gets expired on the specified date in the user's machine. I am not sure whether these two things are possible? Please advice.
Thanks

Hi Douglas,
Thanks very much (and to Chris) for getting back to me.
I attached a zip file that is a small 'hello world' AIR application that I
compiled using FlashBuilder 4, configured to use the 4.1 sdk. I also
attached the self-signed certificate I used when exporting the release
build. The password for this is dogdish. This application gives the error
messages I indicated in my post when attempting to install on the Mac where
the AIR runtime is not yet installed.
We recently upgraded from FlexBuilder 3 to FlashBuilder 4, which I believe
is when this issue started. I followed the instructions for doing a side-car
installation and had no problems with either Mac or Windows when using
FlexBuilder 3.
Thanks for any help you can provide!

Re-calculate payment term condition

Hi all,
We wanted to re-calculate value date according to payment term condition in pricing procedure. We tried formula base (routine) in pricing procedure but in some cases program calculate duplicate values because of finding more than one payment term condition. After that, we tried user exits in sales document(MV45AFZ*) but it could not be solved.
Do you have an idea how we can solve this problem?
thanks.

You can do it . Please follow the steps below:
1:Create one new condition type and assign the relevnt access sequence.
2:Add the condition type at the last in your pricing procedure and mark it as statistical.
3:create a condition record with 0 price, select the relevant paymnet terms, here you can also maintain fixed value date and Additional value dates. check the last 3 columns.
So if the line item has different payment terms, and the condition record is existing for this paymnet terms, then the fixed value date / additional value days maintained in the record will flow at the line item - billing tab - you can check.
Hope this helps
Regards
Sai

How to make "Terms & Conditions" button while activating your iPhone works?

When i was activating my new iPhone 3G with iTunes 10.5, i was shocked that when i press the continue button in the "Terms & Conditions" page nothing happens, and it doesn't continue to the next page.
Please help i can't use my iPhone doing anything.

I have this problem too. Have you figured it out? I'm so frustrated and I tried to call Apple but it would cost $35 to get the question answered. I am hoping someone here can help.

Stuck At " Accept Iphone Terms & Conditions"

I upgraded my iphone and was activating it. The first few steps were smooth and fine. Only until the "Accept Iphone Terms & Conditions" part am I stuck. Only "Table of Contents" is in the box, there were no agreement to accept, however there was a box to check for agreement. So I checked it and click "Continue", but there were no response and I'm just stuck there. The phone was never locked and I bought it in U.S , currently using in Canada.
Here's a screenshot for detail:
Anyone with any information would be appreciated. Thanks in advance!

Hmm, I acctually 've got the same problem with my 2g. I can't Activate it. And when I click to "FAQ" button it's empty too. If I'm trying to click to "Printable version" It opens my browser and there's the message "Your request produced an error."

When I open Photoshop CS4, Terms & Condition comes up and does not open after accepting.

I have adobe Photoshop CS4 that I used only 2 or 3 times. When I try to open it this time, by clicking on the program icon, it starts a Terms & Condition Window with Cancel decline or Accept. clicking any one of these three choices would not open the Photoshop. What do you think is the problem. I may not know much about Photoshop but I am a computer savy. Feel free whatever level of computer/software you want to use. I just need a solution.
Thank you for all of you people's efforts.

Hi Bob,
Thank you for the quick response. I purchased the software form a website that gave discount to students. It is called www.JourneyEd.com
You can also look at the html attachment for more detailed info about the legitimacy of the product and price etc...
Thanks!
Zelalem Mekuria
Royal Crown Real Estate
4640 Admiralty Way, STE 500
Marina del Rey, CA 90292
323-807-0070 Cell
310-881-6969 Fax
[email protected]
www.royalcrownrealestate.com

TS4425 How can i do when the latest iCloud Terms & Condition does not pop up?

When I go to photo stream on my appletv, it says "unable to sign in The icloud terms of service have changed. For more info, go to http://www.apple.com/support/icloud".
I have tried this resolution on my iphone and ipad already:
On your iOS device, tap Settings > iCloud.
Note: Verify that this is the same Apple ID you are using on the Apple TV.
After a moment, the latest iCloud Terms & Conditions will load.
Unfortunately, it does not pop up the icloud terms and condition for me to accept.
Anyone can help me?
Thanks all~

Caused by the Ask Toolbar extension in Firefox 3.6.13, disable that extension or un-install it.

Term&conditions in the purchase order smartform

Dear friends ,
I am struggling with a purchase order smartform where in the first page layout i have
1.addres
2logo
3. po header detail
4.delivery window
5. and now i have a table in the main window to dispaly the item and tax details.
6.And then a footer window.
All this is fine i did. but in the next layout
1. the remaiing part of the item details
suppose there are 7 items in first page 6 items and footer is displayed nad in the next page item no-7 and then
2.P.o value
3.terms & conditions
4. footer is display..
I am very confused...as if the item is 10 then how i will manage the positions of the terms & conditions and footer windows.
pls help ....
on how to design for the second page..i am not well versed with new page-counters..may be that is stopping me ..
pls advice...
thanks.

Hi Simraan,
I guess u just want the term's and condition window to be printed only once after the all the items in main window are printed.
If this is the issue,
then solution is as follows------>>>>>>>
As main window length is variable....it extends according to the no. of table entries can extend to number of pages.
if u want to make anything print just after the complete print out of table in main window then u can declare a TABLE LINE inside the footer of the table and go to Condition tab of the Table line in smartform there in bottom there would be an event ONLY AT PARAGRAPH END, Select this even, once u select this event and inside the corresponding table line if u declare ur terms and conditions then this table line would be printed just Once in ur smartform just after the Complete print of ur table in Main Window.
Hope this resolves ur issue.
Regards,
Akash Rana

While upgrading my iPhone5 OS to iOS 7 'Term & Condition' page for iCloud keep coming even after Agreeing multiple times.

Hi,
I am upgrading the OS of my iPhone5 to iOS7 directly from the device.
It downloaded and started upgrade. During the upgrade process I got stuck in 'Terms & Condition' for iCloud.
I clicked on 'Agree' buttom multiple times. Still itnstallation is not moving forward. It always remains in the same page.
Now I cannot come out the installation process. Even the 'Disagree' option is not taking me out from the 'Terms & Condition' page.
What may be the possible reason? Am I going wrong anywhare?
Regards,
Rajesh

There are various solutions to this posted in this discussion: https://discussions.apple.com/thread/5321627?start=0&tstart=0. Perhaps you'll find one that will work for you.

Approval of Terms & Conditions

Terms and Conditions are often integral processes in forms submissions. Does FormsCentral have an elegant way of acheiving this in a way that meets strict legal standards. I can think of a few different ways of achieving this result, but would rather not have to recreate the wheel if someone else has acheived the same result.... especially when the terms and conditions are very lengthy. Can someone suggest a best practice for having a user approve multiple terms and conditions as part of a forms submission?

Have you considered using the "text box" to spell out your terms, in conjunction with a [Do you agree to this Specific Term?" check "yes" or "no"] ?? Terms can be located and read by user with clicking on the "question mark" symbol to show the "text box"
There is also the function of the "Skip Logic" which may be useful in conjunction with "Insert Page Break". Perhaps you could devote an entire page to the Terms & Conditions at Font size 9 or 10. (still readable and not too small)

After log into SAP Portal, Terms&Conditions Window should open

Hi Team,
As per one of the requirement in my project, i have to develop below applicaiton.
Requirement: Once user logged into portal & trying to access his role first time in a year, Terms & condtions window should open, once user accepted the terms& condtions, user can access his role. if user entered into portal second time in a year, direclty can access his roles.
For this: i have created webdynpro-java application with empty view & portal abstract portal component with terms & conditions text, then i have created portal Iviews for both webdynpro-java application and abstract portal comonent, then i am calling abstract portal component Iview into webdynpro-java component controller wdDoinit() method via WDPortalNavigation.navigateAbsolute() method.
Finally, i have assingned webdypro-java ivew to Test Role: once click on role it is calling Terms&Conditions pop window.
Questions:
1. how can i use same Iview in user actual role, i mean, once user click on his role first time terms & codition window should open? after accepting terms & condtions only his role can access...
2. how can i navigate from terms & condtions to his role?
3. if user didn't accept terms&conditions, he can't access his roles, how can i handle this?
4. how can i check, if it is user first login into portal or not in a year ? where i have to store this user data? what are the parameters i have to use?
can you please help me on this?
Thanks
Sandeep.

sandeep kumar wrote:
> 1. how can i use same Iview in user actual role, i mean, once user click on his role first time terms & codition window should open? after accepting terms & condtions only his role can access...
> 2. how can i navigate from terms & condtions to his role?
> 3. if user didn't accept terms&conditions, he can't access his roles, how can i handle this?
> 4. how can i check, if it is user first login into portal or not in a year ? where i have to store this user data? what are the parameters i have to use?
I would redefine com.sap.portal.navigation.portallauncher.default component for your purpose
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/42c08f81ce2152e10000000a114a6b/content.htm
so WDJ is not really an option here.
To store whether display T&C screen you can use custom attribute on user profile
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/44/0316d50bbe025ce10000000a1553f7/content.htm
public class MyPortalLauncher extends PortalLauncher
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
          INodeList nodeList = request.getNode().getChildNodes();
          if(nodeList != null && nodeList.item(0) != null)
//Check value in user profile whether he accepted T&C this year
//if no - navigate to T&C page
               IResource jspResource = request.getResource("jsp", "jsp/termsAndConditions.jsp");
               response.include(request, jspResource);
//else - process as usuall
               response.include(request, nodeList.item(0));
          else
               IResource jspResource = request.getResource("jsp", "jsp/noRoles.jsp");
               response.include(request, jspResource);
//implement
public void onAcceptClick() throws PageException
//set user attribute value if accepted, logoff is rejected

I need to throw an error message if the terms&conditions checkbox is not checked on click of Submit Button. Can anyone suggest.

I need to throw an error message if the terms&conditions checkbox is not checked on click of Submit Button in webdynpro java. Can anyone suggest.

My Apologies. The simplest way- write the following code in the action of the Submit button-
if (<check box not checked>)
wdComponentAPI.getMessageManager().reportException("Please accept Terms and Conditions to continue",false);
else
continueExecution();
The exception message will be shown on top of the view.
You may like to use Message Area UI element and place it at the bottom of the WD4J view to show our exception message at the bottom of the view.
I hope this helps !
Cheers,
-Amol Gupta

Terms & Conditions PROBLEM

Similar Messages

Maybe you are looking for