Terrible Connection Speeds

Are there any known issues within the EN3 postcode area in North London, ive checked the service status website and there is nothing.
My speeds are terrible, I am getting LESS than 2mb in some cases
I work in IT, so I have done the usual. Restarted machine, router, tested with network cable etc but still terrible. Im already disapointed with the speed I normally get anyway from BT and coupled with the constant disconnections this is just another reason to move to Virgin.
On BT Speed Tester (Beta) I get
DL 2.26
UL 0,01
PING 93.38
On speedtest.net I get
DL 1.16
UL 4.46
PING 16ms
There has to be somethinge seriously wrong here.
I have an iMac i5, with Lion using wireless connection. I have tested with a network cable and results are very similar.
Obviously there is no one at BT now who I can, but is or has anyone had such terrible speeds. This is awful, really considering leaving BT.

Welcome to this customer to customer forum.
To enable forum members to help you, could you look at "ADSL speed and connection issues" on the the web page below, which asks you to do a few checks first, and has some helpful hints.
When you have done that, please follow the instructions at the end of that section, and post the results here, so members can offer advice. Thank you.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Terrible Connection speed newly installed

My BT line was activated on the 12/11/14 however my service was not actually in use until 20/11/14, it worked fine for the first day or two however yesterday I started getting some issues. The broadband kept cutting out and the Hub kept restarting, and when the broadband DID work my speed was incredibly slow and choppy. I ran a speed test this morning and the speed has improved SLIGHTLY but it is still only Running at around 1.4mb download speed and 0.19mb upload! This is ridiculous! I'm paying £20 a month for speeds of between 15-17mb and the maximum i'm getting is 7!!!!
I called BT and they told me something about an issue with sync or something? and they are sending an engineer round tomorrow.

assuming you have a hh5 can you go to hub manager then troubleshooting then helpdesk and post stats 1-12
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Connection speeds down since 2nd security update...

My connection speed(s) has dropped considerably since yesterday's Security Update--I emptied the Trash, repaired Permissions before and after, and so on.
Everything still works but is very slow. Not just Safari, but Mail, MT-Newswatcher, etc.
Is there any way to fix this? I don't want to Uninstaill the Update (if that's even possible), as it is security-related...

After downloading/installing Security Update 2.0 v1.1 Mail and MT-Newswatcher feel like they're back to normal, Safari has gotten some of its speed back but not all, but downloading is still terrible (I'm getting around 3k a sec, whereas it should be around 80).
Waiting for S.U. 2.0 v. 2?...
1.8 GHz iMac G5 20" widescreen (1st generation) Mac OS X (10.4.5) 768MB RAM, 80GB Fantom Firewire external backup

Terrible download speeds - modem problem???

Hi there, I have recently complained to Telstra about the terrible download speeds and the lights on my modem (the the ethernet, wireless and internet always flashing green). I have ADLS Elite which is a joke when it takes so long on most days to dlownload. There was a problem with the line which they reckon they fixed but who knows. Could it possibly be a problem with this modem? I have had the same one for about 5 years now and I reckon it has been a problem from the start as my speeds have never really been very high. I am tired of having to contact Telstra all the time and am seriously considering going elsewhere. I hope someone can help. By the way the moedn is a Thompson Gateway. Thanking you. Regards Yvonne

If there is issues with the light, and they have ruled out an issue with the line (as in they say that has been resolved) then it is quite possible being 5 years old that it is a modem issue.
If you are still under contract then Telstra will usually replace your modem for no charge as they usually will cover it as a warranty replacement as long as you are still contracted with them...
As it is an ADSL connection there are many factors which can restrict your ability to get higher speeds, congestion on the line, noise on the line, distance from the exchange... so even if the modem is a part of it, being on an ADSL1 port instead of an ADSL2+ port, or you might be at a distance where lower speeds are all you will obtain...
I can get the frustration of having low speeds, however depending on what the issue is, even changing providers might not help with the connection, but I would suggest having a word with the Disconnection team, they are pretty good at resolving issues, they will see what they can do to get the connection fixed, if required they should also be able to arrange the replacement modem... Plus they are in Adelaide during normal hours, on 132200 and say "Disconnect" then "no" if you want to relocate.

Aircard vs. MiFi Connection Speed

Is there any difference between the connection speed of a wireless aircard and a MiFi device? I currently have the USB760 wireless modem and I get terrible service from home. Somebody suggested switching to MiFi, and I am wondering if it will make any difference (other than being able to connect multiple devices to the hotspot).

No there is not a difference in the speed of the two. Make sure you update your PRL(preferred roaming list) on the device by going to your VZ Access manager choosing options and clicking on activation it will then automatically start the updating of your software and you may see better speed due the update may have not been completed in a while on the device.
Hope this Helps

Super Slow Connection speed

Hi all, with any luck someone here will be able to offer some wisdom!
Until recently my broadband has been faultless (well not bad anyway), in the last week or so it seems to have nosedived in terms of performance, and I am struggling to work out why. I have been through India, and I have my modem plugged into the test port of the master socket, here is wat things look like in the Hub Manager:
Line state
Connected
Connection time
0 days, 0:53:56
Downstream
8,126 Kbps
Upstream
440 Kbps
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
20.3 dB / 32.9 dB
Line attenuation (Down/Up)
10.0 dB / 4.2 dB
Output power (Down/Up)
0.0 dBm / 12.0 dBm
Loss of Framing (Local)
34
Loss of Signal (Local)
3
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 4294967264
CRC Errors (Down/Up)
0 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
3
The three errors are me pulling the cable out to rest the conenction. The massive FEC / CRC errors are a bug I think. Does anyone know about Loss of Framing and what 0dBm output power are?
I ran the BT speedtest and got some truly terrible results, which said that my profile was 7000kbps, good, and my download was 146kbps, bad.
Anyone know what might be causing my super slow connection? I disconnected all computers barring my laptop in case somethign was secretly thrashing the service, but it didnt help.
Thanks in advance,
Mark.

I have similar problems. My connection was fine until about a week ago, when I started getting noise on my phone.
This has now been fixed, but since then, my Broadband connection speed has dropped from around 2M to 135k. I had an engineer out this morning to check what had been fixed during the first engineer visit (to fix the phone) and once he'd finished, he tested in to the socket to find that he could get 7M speeds. However, since he's been gone, I've plugged my setup back in and still get speeds of 135k.
I've tried removing phone connection so only router plugged in, I've changed filter to see if that was the issue - only things I've not yet tried because they are more hassle first off is trying another ADSL cable and/or a new router
My Hub manager shows the following, but not sure if this helpful to anyone, or if anyone can point me in the right direction of other things to try, I'd be greatly appreciative.
Thanks
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:56:42
Downstream
8,128 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
15.7 dB / 22.0 dB
Line attenuation (Down/Up)
15.0 dB / 8.5 dB
Output power (Down/Up)
19.8 dBm / 12.3 dBm
Loss of Framing (Local)
34
Loss of Signal (Local)
3
Loss of Power (Local)
0
FEC Errors (Down/Up)
13 / 0
CRC Errors (Down/Up)
0 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
3

Connection Speed reading for external USB Modem ????

In previous versions of the Mac OS, I've been able to see a readout of my connection speed achieved with a dial-up modem and telephone line (e.g. 28 kbps, 33 kbps, 50 kbps etc etc) but under this latest 10.5 Version of OS X I can't see this speed in the networking software that controls my Apple USB modem.
Has this feature been dropped with 10.5 ?
If not, how do I see the speed. It would be very helpful to see it as I sometimes travel to some pretty remote areas where phone lines are poor - so if you know the actual connect speed you have a good idea of what sort of size of downloads to attempt and not to attempt while on-line.
I can see such parameters as my time connected and IP address assigned by the ISP, but no connect speed.

I realize the speed that used to be shown was the initial speed the two modems involved, mine and the ISP's, negotiated to establish the connection and I also realize that is not the actual download speed.
But it's still helpful to know that initial speed because it is a rough indicator of line quality ands gives one an idea of how rapidly he will be able to communicate - clearly there will be a significant difference for the better in performance for the online session if one can achieve a connect speed of, say 50k, as opposewd to 28k or less on a poorer line.

Issues with Infinity - Connection Speed & Other Pr...

Hi all,
I had Infinity installed on 2nd November. Besides some issues with BT mixing up delivery addresses the installation by Kelly Comms went smoothly, and was setup within 45 mins.
Initial speeds were very good, achieving 74Mb/s Down & 18Mb/s Up with a Ping/Latency of 5ms Excellent really considering the sub 5Mb/s I was used to with ADSL. The high connection speeds remained over the weekend until about 4pm on November 5th. I found that the Openreach Modem had lost connection (flashing DSL light) and my HH3 Broadband light was a steady orange. I left this for a while before picking up my landline to call customer services only to find that my line was dead with no dial tone.
Broadband eventually came back on service later that afternoon, but at a much lower speed of 43Mb/s Down, and an almost impossibly slow 0.97Mb/s Up. Ping/Latency has also slowed to around 20ms. During the evening I managed to get through to customer services in India, who were able to start dealing with the fault on my phone line.
Initially I was told it would be the 12th of November that the problem with the phone line would be resolved. Fortunately enough it was then fixed the following morning by an apparent engineer visit. I was unaware of this action until later in the day, but had noticed before leaving for work that Broadband was yet again down.
So to cut a long story short: I have a phone line that works, but a big reduction in connectivity speed especially upstream speed. Should I be contacting BT to investigate yet another potential problem bearing in mind that I am still within the supposed '10 day training' window.
(All speed tests have been conducted via a PC connected by ethernet directly to the HH3)
If anyone can advise me it would be much appreciated.

Hi Tidycarrot,
Welcome to the Forum. What was the speed estimate given to you when you signed up to the service? If the speeds you are see are well below that estimate, send me in your details using the link below and I'll run a few test on you line from here.
http://bt.custhelp.com/app/contact_email/c/4951
Thanks
Paddy
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Problems with the Fios 20/5 connection speed in my area dropping down to less than 3mbs.

I have written out a flyer that I plan to go door to door with. Since I am under contract with Verizon, I am forced to honor my side of the contract. Even if they are allowed to make me pay for a service that I am not completely getting. I am very displeased and as soon as my contract is up, I will change back to My local cable companies all in one that does not require a contract and has no issue such as the one I am having.
Do you have Verizon Fios Internet?
Are you on the 20/5 connection?
If so, you may not be getting the speed you are paying for. I am on a 20/5 connection and when my computer is on for longer than an hour the internet download speed with Verizon Fios starts to slow down until it is below 3mbs. It takes about 24 hours to get down to 3mbs but only about an hour or two to get down to about 6-7mbs when I am paying for 20mbs…
I have 3 computers in my home that have Windows Vista, Windows XP home edition and Windows Media Edition 2005. All of the computers run into this same exact issue, I have tried every setting I could think of with my 24 years of computer technical experience. I finally took one machine with Windows XP and ran a full format on the hard drive and reinstalled a fresh Windows Xp Operating system onto the hard drive so it is a bare bones OS. This way there is no other software on the machine that could possibly be causing the problem and found that when I connected online through Verizon Fios the machine still ran into the same exact issue. This proves to me that the issue is not on any of my machines.
Now all of this time my buddy that lives 1.2 miles away from my house has been having the same issue with three computers at his home also. He has Windows Vista on two machines and Windows XP Pro on one.
When I concluded that it was a Verizon Fios issue, after a few months of trying to get by, researching, diagnosing and losing much information in order to verify it was on Verizon’s side, I contacted technical support at Verizon’s online website. The agent and I went through the regular procedure that anyone would have to go through and I patiently explained what I had done to try to diagnose the issue. The agent came to the conclusion that he could not figure out the problem so he guessed that the Verizon router/modem may be the issue and told me he would send me a new one by mail.
I received the new Verizon router/modem, installed it and had to call to have it activated. Afterward it still had the same exact issue as the prior router/modem. So now we know it’s not my computers, it’s not the router/modem. My Verizon router/modem is connected right at the Optical Network Terminal (ONT), which is the box that connects the fiber-optics to your home, usually just inside or outside your garage wall. Mine is just outside…
From here my buddy, who has been having this problem also the entire time, called the local office of Verizon Fios and an installer was setup to come over to his home and trouble shoot the issue. My buddy called me and told me when the installer was headed to his home and I met him at his home to see what the installer found and in hope that my issue would be fixed at the same time. The installer went through the system at his house and was frustrated about not finding the reason for the issue and ready to leave without fixing anything. I simply asked that he stay long enough to see the issue present itself within an hour-hour and a half.
His laptop itself already showed the speed drop from 20mbs to between 16-17mbs, it was on its way down. He basically told us something that online tech support already stated to me, it is extremely difficult to prove it is on Verizon’s side. In other words it is extremely difficult to prove it, in a way that will convince Verizon to check its own servers, routers and software updates to their own systems. The installer, good guy, couldn’t/wouldn’t stay but we did convince him not to simply drop the issue. He called shop and they sent another installer out to take over the issue.
The new installer, great guy, got up to speed on what was already done at my buddies home. The first installer, checked and replaced the Verizon router/modem, checked the wiring and splitters. Basically went through the entire system up to the Optical Network Terminal (ONT), the box that connects the fiber-optics to your home. He pulled and replaced the Optical Network Terminal (ONT), thinking that perhaps the unit was compromised. While he was doing this job a tech was called and asked to stop by for assistance with the issue. The tech checked the computers inside and tried to do some settings that the main office informed him to try. I explained to the tech that the same issue was happening at my house, that I went through every setting I could think of and find online to help alleviate the issue. After some shop talk about what I had tried, including the full format and reinstall of the operating system on one of my machines, he just as I came to the conclusion that it couldn’t be with the computers and since everything that had to do with the Verizon Fios system from the street to the end-user computer had been checked, verified and/or replaced, the issue had to be coming from Verizon’s main office.
The installer had already checked the main at the road that has the 3x2 green service cover on it by the side walk. Everything was in good working order. The tech called the main office to see if my buddy and I were on the same hub, basically a big splitter that continues the service from the main office to the homes, we were not. So that was ruled out…
My understanding of the system ends there. The only other components I know of are the Main branch’s routers, servers and software.
Verizon had a new connection speed added to their system, 25/15 about the same time our issue began. So I am guessing that when they updated the system to include this new connection speed they corrupted the software for the 20/5 connection.
We have been waiting to hear from the tech that was at my buddy’s house, to see if the issue will be dealt with. My buddy has called him a couple of times and he has mentioned that he is trying to get it addressed and to call back if we hadn’t heard from him. He remembered who he and I were and what the issue was, so I believe he is taking it seriously. How far he can move the issue is beyond me…
I want to add that my buddy and I have been customers with the all in one package from Verizon Fios since their services have moved into our area, about a year and a half… It has only been since about June that this issue has presented itself, before then we were on 7th heaven with the speeds. We couldn’t have been more than happy with the services.
This issue has caused that to all go afoul, not only do the speeds get down to less than 3mbs but the speed is not smooth at all. Rather the 3mbs speed is stop and go, freezing in between at times, very choppy. Barely usable at times, unless you restart the computers and start over.
We are hoping that anyone with Verizon Fios Internet Services will keep an eye on their speeds by going to http://speedtest.net and doing tests to verify they are getting the speeds they are paying Verizon for.
This is what it will take for Verizon to take this issue seriously is to gather everyone on the system that may be having the same issue. I believe it is everyone that is within the 1.2 miles from my house to my buddy’s and will distribute flyers to each and every house in between.
If you find that your speed is not as fast as it should be please contact me and I will add you to the list, this way we can see exactly how far this problem covers and perhaps it will also help to show a pattern and understanding as to why the issue is present in the first place.
My contact information,
I have left this out here, you can contact me on these forums...

Actually what this came down to was an issue between Windows Vista and an Ethernet Card on one of the machines in each of our local networks.
Even though our two machines are 6 years apart, we both have the same ethernet adapter on our main desktops. A RealTek RTL8139/810x Family Fast Ethernet Nic. It seems that the adapter does not work at the 20mbs download speeds with Vista. For some reason the adapter does not shut down when the computer does? I don't understand why but it doesn't, it keeps the connection alive. I removed the ethernet cable and pulled the power cable and had my two other computers still connected to the network and found that the issue was resolved. The way I found out was that I used the connections on my main computer to hook up one I had laying around and through further testing found the problem no longer existed...
Then I realized that my buddy and I installed Windows Vista at about the same time, a couple of months ago. Funny how you can forget an important detail like that. Then I remembered that he had the same identical ethernet adapter as I did, I had noticed that while trouble shooting his computer at his home but didn't think it was important at the time. Until the issue was narrowed down to the adapter, then it all seemed to all fall into line.
Quite humbling... In the end, anyone who has Windows Vista and this NIC probably will have problems with the 20mbs download speed of the computers on their own networks. I tried the latest Vista driver from RealTek and also tried to roll back the driver, with no success....
Back at the beginning when we first had fios installed in our homes there wasn't an issue when we had the 10/2 speeds and had Vista. Then we decided to change from Vista to XP because we both were having issues as to what programs you could use and which you could not, shortly after having fios installed. Then when verizon upgraded us to 20/5 we were amazed at the speed and still had no issue because we had XP on our main computers with the RealTek adapters...
We reinstalled Vista because it seemed like we were having more issues with XP by getting hit with Antivirus2008 and its variants and thought it time for a change back...
It didn't really hit us that Vista could be the culprit because we both have a laptop in our networks that have had Vista on them from the get go when there were no issues... We also didn't notice just how bad it was right away and over time kind of left the Vista install out of the equation.
Just strange that one computer can effect all the other computers on the network, even when it is shut down...
I allowed the other two computers to run 24hours and the issue did not present itself, when I added the main computer with the RealTek adapter back to the mix it reappeared. The Realtek adapter is the only real common denominator between his machine and mine.
So now we have three choices,
We can go back to Windows XP.
We can buy a new NIC or a wireless card to replace the RealTek...
Hopefully this post will help anyone else who runs into this problem, it has been very frustrating to say the least...
Thanks to everyone for their help and I apologize for complaining about verizon when it was not a verizon issue. I came to the conclusion that the only part verizon really played was upgrading us to a 20/5 tier which I am thankful for...
Would be nice if this card was on a list that Verizon support could use to troubleshoot , diagnose or eliminate for future support issues.
Message Edited by keiser0619 on 08-06-2009 03:58 PM

Slow Internet Connection Speeds caused by Ethernet Controller Driver

Problem: Internet connection speeds are 1/10 of available connection speed.
1. Problem statement is based on running speed tests at cnet, speedtest.net, and AT&T.
2. I am paying for 12 MBps down load speed but I only get about 1.5 MBps.
3. Other computers in household get 11+ MBps connected to the same ethernet cable and also different ethernet cables.
4. I traced the problem to the network controller driver.
5. I updated to the latest driver with no change in performance.
6. After some experimenting I found that if I re-install the driver after the computer is booted up, the internet connection down load speeds increase to 11+ MBpS (typically around 11.4 with maximum capability of 12)
I have assumed that the driver does not load properly the first time, but why? Or is there some other cause or setting that I have overlooked?
Board: MSI Z77A-G43
Bios: Version 2.0
Ethernet Controller: RealTek RTL8168B PCIe GBE Family Controller
Ethernet Controller Driver: 7.65.1025.2012
VGA: NVIDIA GeForce GTX 550 Ti
PSU: Raidmax RX630Z 630W
Intel Core i7-2700K Sandy Bridge 3.5GHz LGA 1155 95W
MEM: 4x4gb
HDD (Primary): Western Digital WD5000HHTZ-04N21V0 500MB
HDD (Secondary): Hitachi Deskstar HDS723020BLA642 2TB
OS: Windows 7 64bit Professional

Have you installed all of the most recent drivers:
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win7%2064
There is also an realtek firmware update included in the latest bios:
>>Beta BIOSes<<
2.8 is the latest official & there are two newer beta bios's there as well.

My Lacie Big Extreme Hard drive does not show connection speed

*My Concern*
Hi I have a Lacie Big Extreme Hard drive, which although works fine is not showing its connection, shows up in the system profiler as 'Connection Speed Unknown'. -Should I be worried? I have other drives connected to my G5 Dual 2 gig machine and no problem their they all show their connection speeds.
*Other Firewire 'Unknown Speed connection' related Problem*
I had a DVD LaCie Dual layer portable Firewire drive which recently suffered from the same problem and I had to send it back. This was due to it slowly developing a fault of not being able to burn dual layer disks properly.
*What I have done to try and remedy the situation.*
I have been able to do the following but I am afraid with no change in the system Profiler;-
1 Trashed the whole system and rebuild
2 repair my permissions
3 empty out all my caches with OnyX (third party app) version 1.8.5
4 Disconnected all drives and reconnected them one by one to see if there are any anomalies within the system
5 switched my G5 off removed the plug from the wall waited 30 sec for it to reset itself this was the 1st attempt. On my 2nd attempt I then cold booted the machine and reset Pram settings
6 used Tech Tools Pro 4 version 4.1.2
7. Replaced Power supply of the offending unit (didn't have to but I wanted to be safe and eliminate this fronm the equation.
9.tried changing around the order in the chain to which the drives were connected to the G5but alas no joy!
Summery
So my concern is if a device which is Firewire shows up in the system profiler as connection speed unknown should I begin to worry even though it appears to be functioning.
Thank you ahead of time for any help on this matter
*Supporting evidence*
Please see below a shot of my System profiler so you can see what I mean:-
*(Important Note)*
The Lacie Big disk has 800/400 Firewire connection speeds I have connected it straight to my G5s firewire 800 port then daisy chained the LaCie's via its other 800 port to the two other 800 Firewire Hard drives.
When the LaCie DVD DL drive was connected, I connected it straight to the 400 firewire port. As it needed direct access to the G5 for it to function optimally.
*System Profiler Info under OSX Tiger 10.4.11*
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
LaCie d2 Extreme LUN 0:
Manufacturer: LaCie Group SA
Model: 0x0
GUID: 0xD04B710B061FB5
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
LaCie d2 Extreme LUN 0 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x102
Product Revision Level: P22O
Sub-units:
LaCie d2 Extreme LUN 0 SBP-LUN:
Capacity: 153.38 GB
Removable Media: Yes
BSD Name: disk2
OS9 Drivers: Yes
S.M.A.R.T. status: Not Supported
Volumes:
disk2s6:
Capacity: 153.38 GB
Available: 102.21 GB
Writable: Yes
File System: HFS+
d2 quadra (button):
Manufacturer: LaCie
Model: 0x4136
GUID: 0xD04B840A07A9A5
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
d2 quadra (button) Unit:
Unit Software Version: 0x484944
Unit Spec ID: 0xD04B
d2 quadra Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x110
Product Revision Level:
Sub-units:
d2 quadra SBP-LUN:
Capacity: 465.76 GB
Removable Media: Yes
BSD Name: disk4
OS9 Drivers: No
S.M.A.R.T. status: Not Supported
Volumes:
disk4s3:
Capacity: 465.64 GB
Available: 250.79 GB
Writable: Yes
File System: Journaled HFS+
LaCie Big Disk Extreme LUN 0:
Manufacturer: LaCie Group SA
Model: 0x0
GUID: 0xD04B741A058BFC
Maximum Speed: Up to 800 Mb/sec
*Connection Speed: Unknown --------------------------**{this is where my concern lies}*
Sub-units:
LaCie Big Disk Extreme LUN 0 Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x102
Product Revision Level: 912
Sub-units:
LaCie Big Disk Extreme LUN 0 SBP-LUN:
Capacity: 931.52 GB
Removable Media: Yes
BSD Name: disk3
OS9 Drivers: Yes
S.M.A.R.T. status: Not Supported
Volumes:
disk3s6:
Capacity: 931.52 GB
Available: 181.67 GB
Writable: Yes
File System: HFS+

Hi BDAqua - thanks a lot for replying - really appreciate your help. I was using Time machine to back up on the old lacie drives that I have - I just backed up on both lacies and they backed up faster for some reason but that might have been because they were very small back ups as I did full back ups on Tuesday night - this is the info under the USB section > hardware > about my mac - it didn't show the speed like the example you gave me though but it still backed none the less :
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x15
Bluetooth USB Host Controller:
Product ID: 0x8207
Vendor ID: 0x05ac (Apple Inc.)
Version: 19.65
Speed: Up to 12 Mb/sec
Manufacturer: Apple Inc.
Location ID: 0x15200000
Current Available (mA): 500
Current Required (mA): 0
I also got a reply back from WD on the hard drive and they said the following - exactly the same as you about it being a problem with the power supplied hence why the disk won't mount - so you were spot on - so I'm thinking I should go ahead and get the newertech 7 USB port 4 amps as you suggested - let me know what you think and then I'll just order it - and thank you - really do appreciate your help on this - thanks Jayas
Dear Jayas
Thank you for contacting Western Digital Customer Service and Support. My name is James.
If the drive is working fine on one system but failing on another especially with the "clicking" sound this is an issue with the system not being able to supply enough power to power the device.
These devices require power from the machine to make them operate if there isn't enough power supplied the drive will fail to work. This is why you are having no issues with one system but are on another.

Connection speed high but pages have been loading slowly for last 4 days.

My Broadband has performed well for the last two years but 4 days ago web pages have suddenly begun to take ages to load (10 to 15 seconds or more).
Checking my connection speed gives, typically, 7816 kbits downloaded in 1.542 sec.
The problem persists with Safari, Internet Express, Camino and Firefox.
Another problem cropped up at the same time in that a web site I use regularly suddenly became unavailable to me - but still OK for others. This also applied to Google UK until yesterday but now that is back.
Can anyone help?
Regards
Chris

Look at these links
Mac Tune-up: 34 Software Speedups
http://www.macworld.com/article/49489/2006/02/softwarespeed.html
52 Ways to Speed Up OS X
http://www.imafish.co.uk/articles/post/articles/130/52-ways-to-speed-up-os-x/
Tuning Mac OS X Performance
http://www.thexlab.com/faqs/performance.html
11 Ways to Optimize Your Mac's Performance
http://lowendmac.com/eubanks/07/0312.html
The Top 7 Free Utilities To Maintain A Mac.
http://mac360.com/index.php/mac360/comments/thetop_7_free_utilities_to_maintain_amac/
Mac OS X: System maintenance
http://discussions.apple.com/thread.jspa?messageID=607640
 Cheers, Tom

IWeb publishing to .Mac/iDisk- interruptions: does connection speed matter?

Greetings,
I posted an earlier message somewhere in the iWeb08 forum regarding my suddenly experiencing lack of completion of publishing iWeb site to .Mac. Publishing just stops - no error message comes up. I have however noticed that my internet connection has been also varying in speed - down to a few dozen kbps in the last day, which is when I started experiencing this problem. Does connection speed affect such publishing? in other words, if connection speed goes down tremendously, does publishing to .Mac sort os "times out"???
Will appreciate input!
- Roger T

More than likely you are seeing a cached copy of your website. Sometimes this is a local phenomenon and a simple clearing of your browser cache does the trick (Safari>Empty Cache). However sometimes your ISP is the culprit with caching at their level. This seems to be a chronic problem with ISPs in the UK for some reason. And the only thing you can do is to wait it out.
You can try adding a "?" to the end of your URL to force Safari to fetch a non-locally-cached copy of your site, but even this won't help if your ISP is overzealously caching material.
Anyone in the UK can shed light on this ISP phenomenon???
If you find this information useful, please don't forget to provide me with feedback by marking my reply as "solved" or "helpful" using those little buttons that you see in the title bar of this reply. I really appreciate it!

Minimum Connection Speed & A few other Questions.

Living in rural Vermont this is of concern, is there a minimum connection speed for the CC versions?
If one has no internet access during the 23-33rd days but returns on day 35 what happens?
Can the check-in occur on Day 21 instead?
Finally, I saw mention made of CS7 and CS8. Are these in the planning stage? If the CC versions are simply a conveince for those who want this service and the regular updates are coming I would be very much happier.
Thanks!

Hi there,
There is no minimum connect speed requirement for the Creative Cloud membership or using CC products.
The two things for which you would need an Internet connection are -
1. downloading the creative cloud products that you would like to install & use
2. licensing & activating the products by signing in with your CC membership ID
for #1, Adobe has implemented a lot of improvements to be able to resume downloads of CC products post a network failure or outage.
for #2, a minimal Internet bandwidth is required
So, as long as your connection allows you to accomplish the above, you are all good.
>> If one has no internet access during the 23-33rd days but returns on day 35 what happens? Can the check-in occur on Day 21 instead?
If your CC membership is active, you will be able to resume working on the software after hitting 'Try Again' in the 'Renew your subscription' prompt that you will see in the software on the 35th day. We are working on certain enhancements that will provide flexibility vs. the monthly subscription check-ins.
>> Finally, I saw mention made of CS7 and CS8. Are these in the planning stage? If the CC versions are simply a conveince for those who want this service and the regular updates are coming I would be very much happier.
Please refer the letter from the Creative Cloud team for details - http://www.adobe.com/cc/letter.html
Thanks,
Charat

Very low connection speed.

Hi, I've waited the 10 days since I first got BT Broadband and I wondered about the slow speed I am getting. The speed test says my line is rated for 8mbit (8000kbit) but I only get up to 900kbit connection speed, it was around 600-700kbit for a while but now seems to have settled at 900~kbit. When I ordered the package the line check said I can get between 8 and 15megabit but should expect 8.5.
Is there a fault on the line? The online speed checker thing (which seems to have been replaced or I just can't find it anymore) said I should report a fault and that on my line I should be connecting at more like 6000kbit-7000kbit.
This is what my router says in the advanced connection page:
ADSL Line Status
Connection information
Line state:
Connected
Connection time:
2 days, 13:50:05
Downstream:
947 Kbps
Upstream:
551 Kbps
ADSL settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.3 Annex A
Latency type:
Fast
Noise margin (Down/Up):
4.1 dB / 5.8 dB
Line attenuation (Down/Up):
75.0 dB / 41.7 dB
Output power (Down/Up):
0.0 dBm / 12.7 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
3690 / 1011
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
Loss of Link (Remote):
0
HEC Errors (Down/Up):
2810 / 467
Error Seconds (Local/Remote):
0 / 729

Here's the results of the download test thingy:
This Test comprises of Best Effort Test: -provides background information.
Download Speed
763 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 763 Kbps
For your connection, the acceptable range of speeds is 2000-7150 Kbps.
IP Profile for your line is - 8000 Kbps
This test was not conclusive and further testing is required.This might be useful for your ISP to investigate the fault.
Note: An Upstream test was not conducted on this line due to a technical issue. If your concern is related to upstream performance then please retry
the performance test again in 1 hours time.

Terrible Connection Speeds

Similar Messages

Maybe you are looking for