Territory Management - Looking for integration with ERP Cost Centers
We are exploring using Territory management in CRM 7.0. However, the hierarchy structure is really the same as our cost center structure in ERP. The Business does not want to have to maintain this information twice. Is there some way to update one from the other? Or is there any integration between the two?
Milan,
When we were first looking at automation/customization with Initiatives, the challenge was how different each project plan was. With all the different layouts and formats that different project leaders used in different areas of the same company, it make it impossible to come up with some way of standardizing how to get the data into Initiatives. If you were looking at bringing in the data to a table first, that would certainly solve that format issue.
Initiatives aren't populated with data from PAS, instead they are created manually in the system. There are pop-up boxes involved as well. I need to do some further research into how you could best do this.
This would be a customization.
Regards.
Bob
Similar Messages
-
Question.
I look for integrated in the legend bloc of diaporama, a widget such as "Accordion" for, with a click, or passing with mouse, open a new legend for each photo. I tried with "Accordion" of Muse, it does not work. I tried copy/paste, mais no result. The widget disappear in bloc legend. disparaître. Have you one solution?
Thank you,
LoïcAccordion or Tabbed panel should to it, with click and open container.
Please provide site url where this does not work, also if you can provide an example where we can see the exact action then it would help us.
Thanks,
Sanjit -
SpaceX is looking for engineers with LabVIEW experience in Hawthorne CA (LA area)
SpaceX is looking for engineers with LabVIEW programming experience for our Launch group. Our responsibilities include:
Controlling launch pad equipment via PXI/LabVIEW
Commanding and monitoring our Falcon 1 and Falcon 9 rockets via a LabVIEW-based Vehicle control system
Commanding and monitoring our Dragon capsules via a LabVIEW-based Mission Operation system
Ocean recovery of Falcon 1 and Falcon 9 stages after liftoff and Dragon capsules after splashdown
Cargo configuration of Dragon capsules going to resupply the International Space Station
Maintenance of Mission Control Centers with the help of our IT department
With the exception of the launch pad equipment program, most of our LabVIEW programs do not interact with DAQ hardware (unusual, I know). The Vehicle control and Mission Operations software get their data via Ethernet from 'black boxes' that connect to NASA & Commercial RF ground stations. We also create several utility programs in LabVIEW that also don't interact with hardware. So, this is mostly a software gig, not a hardware/software gig.
Ideal candidates will have the following qualities:
CLD-level LabVIEW experience
A good understanding of basic computer networking (TCP/IP, UPD, firewalls, VPN)
Must be enthusiastic about space (What year did we land on the moon? How many men walked on the moon? How many Space Shuttles do we currently have? etc.)
Must be willing to travel. Common destinations include Houston (NASA Johnson Space Center), McGregor TX (test site), Cape Canaveral FL (launch site), Kwajalein Marshall Islands (launch site)
Must be able to work without supervision. We have a very flat management structure, no one will be telling you what you need to do. If you don’t know, ask. If you do know, get it done.
About the job:
Job is located in Hawthorne, CA in the Los Angeles area.
This is not a 9-5 job. There will be some late nights.
You won't be LabVIEW only. Everyone chips in as needed. Our group has done Javascript, C++, MATLAB, configuring of TELEX comm systems, cutting of metal with bandsaws, welding, Unigraphics CAD, etc. If we need it and you don't know it, grab a book and learn.
We are only hiring full time employees. Contractors need not apply.
To conform to U.S. Government space technology export regulations, SpaceX hires only U.S. citizens and U.S. Permanent Residents.
Apply at SpaceX.com. Click the Careers button and fill out the general application. Mention this posting in the cover letter field. Don’t reply to this forum. You need to go to SpaceX.com to get your information into our system.
Message Edited by Lavezza on 03-31-2010 03:59 PMThere is a job posting up now at SpaceX.com. Go to the careers tab and search for LabVIEW.
Look for the position called: Mission Control Software Engineers (LabVIEW). -
Solution Manager 7.1 Integration with Sharepoint
Hello,
We are trying tio implement Solution docuemtnation in Solution manager 7.1 integrated with Sharepoint. Need any suggestion or guidence to integrate Solution MAnager with Share point.
We want to store docuemtn in share point and would like to provide a link of this docuemnt in Solution MAnager.
Regards,
BAIs it possible that i can give a url of solution amanager project in portal or in some other frontend from where I can access the docuemtn availablle in the perticulat project in SM using th url. ( without SAP GUI)
A project specific iview maybe if you are using SAP Portal? I have not tried it myself, so I cannot elaborate on the topic.
But project specific documents (if they are being uploaded to MOSS and only web-linked in SolMan) should just be locked/read only and can be access controlled using MOSS security as well. So I wonder why the complication of providing it to everyone on a Portal link, when the webfront end for MOSS should provide you the link and the content can be controlled using MOSS security
Also apart from MOSS is it possibel to use TREX as an search engine.
This would be a possible disadvantage, but you are not missing out on much, because MOSS's context based search is actually better, and i ssay this from personal experience.
Hope that Helps!
Cheers!! -
Fortinet configuration with SCCM - just looking for experiences with it.
Just looking for experiences with Fortinet SSL gateway and managing clients with SCCM with it. I'm planning on building a lab area and selling management the idea of using Windows Defender and managing the 700 remote clients we have with our SCCM 2k7
R2 setup on Windows 7.
So if anyone has any experiences it would be handy. Or white papers would be awesome.
Trying to figure out an SSL gateway product with a path of least resistance that isn't Citrix.Yes, I know this is an old post, but I’m trying to clean them up.
You will get more responses from Fortinet forums.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ -
Looking for Help with Hyperion to JAVA
I am looking for help with connecting Hyperion to Java. We are in Maryland but would be willing to work out something for remote consulting. If you have experience with connecting web services, hyperion, and Java and would be interested in about 80 hours of consulting please contact me at:[email protected] x4846
Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support -
Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
ThanksHi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support -
How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.
What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad -
I don't use Photoshop, I'm an Aperture guy.
I'm looking for software with similar functionality to Photoshop's Pixelbender / Oil Painting.
I'm especially interested in the bending of the pixels, along the lines of impressionist paintings - think van Gogh.
Any suggestions?If you are interested in computer simulated drawing and painting effects, have a look at the "ToonIt!" plug-in for Aperture. This will do some of the basic work for you, but you will have to do quite a lot of editing afterwards, to turn the image into a piece of art.
It might be easier, to do most of the drwing and painting yourself in the first place - ArtRage Deluxe is very versatile, if you have a large trackpad and pen.
For example: Applying a light ToonIt! effect "Impressionist2": The diagonal
cross-pattern is due to "Demo" mode - I have not yet bought the plug-in - it is rather expensive:
The original: -
one question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to change that setting?
TYThe History menu can only show that fixed maximum of 15 as that is hard coded.
Maybe this extension helps:
*History Submenus Ⅱ: https://addons.mozilla.org/firefox/addon/history-submenus-2/ -
Best Third party Fax Server for integration with SOA
Hi
Which is the best third party fax server for integration with SOA ??
I am having requirement to configure Fax for client..
Edited by: 910947 on Feb 16, 2012 4:12 AMi am having following option
Using Java API like InterFAX
or
Using Fax Server like SilentFax or RightFax
or
Using Virtual Fax Server like GreenFax or myfax
Which is the best solution, i should go for that will best fit with my SOA Suite??? -
Class not registered. Looking for object with CLSID:
Hi,
I had create a custom project system with the help of https://msdn.microsoft.com/en-us/library/vstudio/cc512961.aspx. And which is working fine that I can create a project with extension of .myproj in the VS Experimental Instance window. But when I go for
the properties in the created project, (Solution Explorer: Right click on the project folder and select properties) it will show an exception that "Class not registered. Looking for object with CLSID:{00000-00-00-000000}" How can I provide Properties
window for this project system or can I modify the Properties window for any other default VS project system? Please help me.Hi mathikp,
I don't think you did something wrong while creating the project, but instead it could be the issue of environment, I would suggest you to validate following things:
1, Try to create another blank app to see if the exception still thrown.
2, Run with an administrator privilege to check if you can get the project work..
I would not consider its as a coding issue but try to fix Visual Studio probably helps.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Looking for integration details of Kewill with Oracle Shipping execution
Hello Folks,
Has anyone done integration of Kewill (flagship) with Oracle Shipping 11i. Customer has plans to implement OTM later.
please provide me some details or documentation.
regards
girish
Edited by: 849679 on Apr 6, 2011 8:25 AM
Edited by: 849679 on Apr 6, 2011 9:02 AMPl do not post duplicate threads - Looking for documentation of Kewill Integration with Oracle Shipping
Srini -
Configuring PI during Integration of Cloud for Customer with ERP
While trying to Integrate SAP Cloud for Customer with SAP ERP using PI, while configuring PI, we need to create a Technical and Business System in SLD for Cloud for Customer. During the Technical System configuration wizard, it asks for "Technical System Identification" and "System Host Name". How do I find this? Is it on Cloud for Customer?
Thanks and regards,
Nikhil Da Gama Pais,
[email protected]Hi Nikhil,
I think its an alias given to the system as the system is being created as a standalone. You can give your own name for understanding purpose as I also gave my own acronym for cloud system in PI.
Thanks,
Ravi -
Online Meet 15. Is XI mandatory or optional for integration with mySAP ERP?
no but if you use XI you can get a predefined set
(xi content) for the AII integration
so you get an out of the box scenario
Regards,
michalhi,
If u want to call an RFC or so from an R3 system , then XI is the way to do it...
ERIC's words on the meeting were " XI is there for integration , so y not try and use it for ease.."
regards,
arul sekar.
Maybe you are looking for
-
Does not show my hard drive when i try to install Tiger...
I have a Powerbook G4 that has no operating system installed yet, so when i try to install Tiger, i have to put the DVD in while booting up. I went to the installing screen, and i agreed to everything and all, but when i got to the part where it asks
-
Unplanned delivery costs in FB60
Hello friends, We are on release ECC 5.0. Is there a field for Unplanned delivery costs in FB60 like there is for MIRO? If no, how are things such as freight charges handled in FB60? Are they done through a direct posting to a freight G/L account?
-
Hello All: I am receiving an error when I run the Manage Hybrid Configuration wizard - ERROR:Updating hybrid configuration failed with error 'Subtask NeedsConfiguration execution failed: Configure Recipient Settings. I have opened a SR, but figured I
-
Express Media Player (EMP) recovery disc - Satelite P105-S6024
I have some problem with my express media player software on my new machine Satelite P105-6024. As I have bought it everything work properly. But then, I have made partitions on my HDD and have instaled whole the software from recovery discs. And eve
-
Hi I have large database and i need to perform batch deleting without affecting the transaction log. So if I set the Recovery mode to Simple before deleting the transaction log will not grow ?? Thanks.