TES 5.3.1 Client on Windows 7 in XP Mode

Has anyone tried to run a 5.3.1 Client on Windows 7? It's not supported on this platform but I would have thought it should theoretically run if you have the Windows XP compatibility mode option installed.

Alastair,
We do support Windows 7 with TES 5.3.1 starting with client build 5.3.1.303. I do recommend running in XP compatibility mode because you lose some features such as maximize/minimize running the client using Windows 7.
- John

Similar Messages

No Jabber client for Windows Phone 8.1

Can you advise on when a Jabber client for Windows Phone 8.1 will be released?

Roadmap questions cannot be addressed here, either ask in a partner forum, or reach your SE/AM for this.

How to create a VPN client for Windows Phone 8.1?

We have our own VPN client for Windows and Android. I would like to create a VPN client for Windows phone 8.1. After referring these site I found that there are some third
party VPN plugins available for WP 8.1.
I checked OpenVPN but it is also not available for WP 8.1.
Is there any APIs available for creating a VPN client in WP 8.1 similar to
VpnService provided by Android SDK ?

The VPN APIs for WP8.1 are not open at this time.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Directory Caching issue with Cisco Jabber client for Windows

Hi ,
I am facing cache issue with Cisco Jabber client for Windows. If I do any change related to modification or deletion of contacts in Active Directory/ Callmanager, it does not reflect in the Jabber. Because jabber takes the contacts from the locally stored cache file in the Windows system.
Every time I have to remove the cache file to overcome this issue, practically it's not possible to do the same with all the Widows users. As, if any employee leaves the company and still I can see his contact appears in the "Cisco Jabber client". I have not seen this issue with Android/Apple iOS.
Is there any automated way to remove the cache file?
Here is the detail of CUCM,Presence and Jabber.
CUCM version: 9.1.x
Presence : 9.1.X
Jabber : 10.5 and 10.6

Hello
On our environment we had to install a dedicated Microsoft Certificate Authority "just for Cisco Jabber usage" to house the
Network Device Enrollment Service.
Our certificate for the CUPS were generated on this Certification Authority too.
I discussed this certificate matter with my colleagues this afternoon and nobody seems to remember how these certificates were deployed into the
Enterprise Trust store for the users.
But I think they asked all 400 users to accept the 3 certificates by answering "yes" to the popup instead of using a script deployed by GPO...
I wish you success with that deployment and really hope you have a technical partner that *Knows* this subject.
Our partner left us alone with that unfortunately.
Florent
EDIT: If the "Certutil script method" works, please let me know. This could be useful in our own deployment.

VPN Client and Windows Folder Synchronisation

We are currently having problems with Windows XP Laptops which have folders Synchronised to Servers.
When they are working remotely, they use the VPN client to connect to the network. Unfortunately, the VPN Client Adapter does not appear in the "Network Connection" drop down menu within the Synchronisation Setup screens. This means that the synchronisation takes place once the Physical Adapter (LAN or Wireless) comes active and an error message appears everytime.
Has anyone come across this and found a fix for it ? There must be a away of getting the VPN LAN Adapter into the Synchronisation Network Connection list.

The only supported IPSec client for Windows 7 is 5.0.6. I would recommend uninstalling the client version that you have, upgrade the DNE package from Citrix, and then install the latest IPSec client.
Release Note:
http://www.cisco.com/en/US/partner/docs/security/vpn_client/cisco_vpn_client/vpn_client5006/release/notes/vpnclient5006.html#wp62415
DNE Update:
http://www.citrix.com/lang/English/lp/lp_1680845.asp
Client Download:
http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=5.0.06.0110&mdfid=281940730&sftType=VPN+Client+Software&optPlat=Windows&nodecount=2&edesignator=null&modelName=Cisco+VPN+Client+v5.x&treeMdfId=268438162&treeName=Security&modifmdfid=&imname=&hybrid=&imst=&lr=Y

How to run SAP BUSINESS ONE 8.8 clients on windows and use MaxDB on linux/W

Good day,
As the subject shows we have SAP BUSINESS ONE 8.8 and I want to find out how to use it in combination with MaxDB instead of MS SQL. I find a lot of MaxDB stuff on the net but no guides on how to setup SAP BUSINESS ONE 8.8 clients on windows workstations and connect them to MaxDB.
Is this possible and if so how do I go about doing it ?
Any assistance is greatly appreciated .

Hi,
I suggest you to check the supported server for B1 in this link:
http://service.sap.com/smb/sbo/platforms
You will know the sap b1 supported platform.
If you really want to use maxDB on linux/W as B1 server, you can send a development request to SAP AG.
JimM

Deployment of JavaFX Web application on client machine(Windows OS.)

Problem Statement:
Deployment of JavaFX Web application on client machine(Windows OS.)
Error: unable to load the native libarary(JNI Windows dll) i.e. throws java.lang.UnsatisfiedLinkError exception.
Problem Description:
I have create the JavaFX application which have dependency on Native library written in Java Native Interface(JNI).
When the application is deployed on Apache 6.0 Tomcat Server(Copied .html file *.jnlp file and .jar file) and when client machine hit the html page in internet explorer version 8.0 its throws the following error(java.lang.UnsatisfiedLinkError: no JNIHelloWorld in java.library.path)
Note:
I have created the jar file which have my "JNIHelloWorld' native library dll in root directory. I have signed the jar with same signature which i have used for signing for my application Jar file.
I have mentioned the native library jar in JNLP file resource keyword as follows:
<resources os=Windows>
<nativelib href="JNIHelloWorld.jar" download="eager" />
</resources>
The complete jnlp file content is in "JavaFXApplication.jnlp file:" section below.
The description of error is as follows:
Match: beginTraversal
Match: digest selected JREDesc: JREDesc[version 1.6+, heap=-1--1, args=null, href=http://java.sun.com/products/autodl/j2se, sel=false, null, null], JREInfo: JREInfo for index 0:
platform is: 1.7
product is: 1.7.0_07
location is: http://java.sun.com/products/autodl/j2se
path is: C:\Program Files\Java\jre7\bin\javaw.exe
args is: null
native platform is: Windows, x86 [ x86, 32bit ]
JavaFX runtime is: JavaFX 2.2.1 found at C:\Program Files\Java\jre7\
enabled is: true
registered is: true
system is: true
     Match: ignoring maxHeap: -1
     Match: ignoring InitHeap: -1
     Match: digesting vmargs: null
     Match: digested vmargs: [JVMParameters: isSecure: true, args: ]
     Match: JVM args after accumulation: [JVMParameters: isSecure: true, args: ]
     Match: digest LaunchDesc: http://10.187.143.68:8282/KPIT/JavaFXApplication20.jnlp
     Match: digest properties: []
     Match: JVM args: [JVMParameters: isSecure: true, args: ]
     Match: endTraversal ..
     Match: JVM args final:
     Match: Running JREInfo Version match: 1.7.0.07 == 1.7.0.07
     *Match: Running JVM args match: have:<> satisfy want:<>*
*java.lang.UnsatisfiedLinkError: no JNIHelloWorld in java.library.path*
*     at java.lang.ClassLoader.loadLibrary(Unknown Source)*
*     at java.lang.Runtime.loadLibrary0(Unknown Source)*
*     at java.lang.System.loadLibrary(Unknown Source)*     at javafxapplication20.JavaFXApplication20.<clinit>(JavaFXApplication20.java:41)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
     at java.lang.reflect.Constructor.newInstance(Unknown Source)
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at com.sun.javafx.applet.FXApplet2.init(FXApplet2.java:63)
     at com.sun.deploy.uitoolkit.impl.fx.FXApplet2Adapter.init(FXApplet2Adapter.java:207)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Java Plug-in 10.7.2.11
Using JRE version 1.7.0_07-b11 Java HotSpot(TM) Client VM
User home directory = C:\Users\io839
Please find my native library code and JavaFX application code:
Native library JNI Code:
JavaFXApplication.java:
JNIEXPORT jstring JNICALL Java_javafxapplication_SampleController_printString(JNIEnv *env, jobject envObject)
     string str = "hello JNI";
     jstring jniStr = env->NewStringUTF(str.c_str());
     return jniStr;
JavaFX Application code:
JavaFXApplication.java:
package javafxapplication;
import javafx.application.Application;
import javafx.fxml.FXMLLoader;
import javafx.scene.Parent;
import javafx.scene.Scene;
import javafx.stage.Stage;
public class JavaFXApplication extends Application {
@Override
public void start(Stage stage) throws Exception {
Parent root = FXMLLoader.load(getClass().getResource("Sample.fxml"));
Scene scene = new Scene(root);
stage.setScene(scene);
stage.show();
* The main() method is ignored in correctly deployed JavaFX application.
* main() serves only as fallback in case the application can not be
* launched through deployment artifacts, e.g., in IDEs with limited FX
* support. NetBeans ignores main().
* @param args the command line arguments
public static void main(String[] args) {
launch(args);
static{
System.loadLibrary("JNIHelloWorld");
SampleController.java file:
package javafxapplication;
import java.net.URL;
import java.util.ResourceBundle;
import javafx.event.ActionEvent;
import javafx.fxml.FXML;
import javafx.fxml.Initializable;
import javafx.scene.control.Label;
public class SampleController implements Initializable {
@FXML
private Label label;
private native String printString();
@FXML
private void handleButtonAction(ActionEvent event) {
System.out.println("You clicked me!");
String str = printString();
label.setText(str);
@Override
public void initialize(URL url, ResourceBundle rb) {
// TODO
//String str = printString();
JavaFXApplication.jnlp file:
<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="1.0" xmlns:jfx="http://javafx.com" href="JavaFXApplication.jnlp">
<information>
<title>JavaFXApplication20</title>
<vendor>io839</vendor>
<description>Sample JavaFX 2.0 application.</description>
<offline-allowed/>
</information>
<resources>
<jfx:javafx-runtime version="2.2+" href="http://javadl.sun.com/webapps/download/GetFile/javafx-latest/windows-i586/javafx2.jnlp"/>
</resources>
<resources>
<j2se version="1.6+" href="http://java.sun.com/products/autodl/j2se"/>
<jar href="JavaFXApplication.jar" size="20918" download="eager" />
</resources>
<resources os=Windows>
<nativelib href="JNIHelloWorld.jar" download="eager" />
</resources>
<security>
<all-permissions/>
</security>
<applet-desc width="800" height="600" main-class="com.javafx.main.NoJavaFXFallback" name="JavaFXApplication" >
<param name="requiredFXVersion" value="2.2+"/>
</applet-desc>
<jfx:javafx-desc width="800" height="600" main-class="javafxapplication.JavaFXApplication" name="JavaFXApplication" />
<update check="always"/>
</jnlp>

No problem.
Make sure your resources are set at the proper location. Could be that tje jni.jar is under a 'lib' folder?
Normally you don't have to worry about deployment a lot if you are using like Netbeans 7.2 or higher.
When you press 'Clean and build' it creates your deployed files in the 'dist' folder.
You can change specification by adapting the build.xml file.
Of course lot of different possibilities are available for deployment!
You can find lot of info here:
[http://docs.oracle.com/javafx/2/deployment/jfxpub-deployment.htm|http://docs.oracle.com/javafx/2/deployment/jfxpub-deployment.htm]
Important to know is if you want to work with
- a standalone application (self-contained or not)
- with webstart
- or with applets
(In my case I'm using webstart, but also Self-Contained Application Packaging (jre is also installed!)

Multiple clients on Windows 7?

I currently have a 64-bit Oracle 11gR2 client on Windows 7 64-bit desktop accessing an Oracle 10g database. This set-up works fine to reach the database either via SQL-PLUS or via a QlikView 64-bit desktop client.
The problem is that Toad for Data Analysts, which I need to access the same 10g database, only works with a 32-bit Oracle client.
Can I have 2 clients on my desktop: a 64-bit Oracle administrator installation for Qlikview and a 32-bit Oracle Instant Client for Toad? Do I use copies of the same TSNAMES.ORA in both installations since they are accessing the same database?
Thanks!

OK...moving forward... I have downloaded and unzipped the 32-bit Oracle Instant Client that I need for Toad; however, there seems to be no installation files or HOME folder. The installation instructions simply say to unzip it into a folder and set the path to that folder.
When I open the Oracle Universal Installer to set the path, it only identifies that I have installed the 64-bit (full) client and not the Instant Client.
What am I missing, please?
Does the Instant Client even use the TSNAMES.ORA? If so, I don't know where to put it.
Edited by: user13515882 on Feb 3, 2012 11:10 AM

Error while installing HFM 9.3.1 Client on windows 7.

Hello,
I am trying to install and configure HFM 9.3.1 client on windows 7 x64 machine, but getting following two errors while configuring with shared service, in random manner.
1. An Unknown CSS error occurred. Please check that information entered is correct.
2. Registration parameters cannot be validated successfully. Please check that information entered is correct.
I found these entries in configtool_err.log:
(Feb 01, 2013, 05:02:35 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to initialize CSS API
(Feb 01, 2013, 05:02:35 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Feb 05, 2013, 09:16:41 AM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Error:
Error Code: -1
com.hyperion.css.common.configuration.CSSConfigurationException: Cannot configure the system. Please check the configuration. Error Code: 9
NestedException:
java.io.IOException: Property data cannot be loaded from cache.
I am using default admin and password to configure,
I can ping server from windows 7 machine.
I checked and all services are running on servers.
Did i miss something?
What should I do to configure it successfully?
Thanks in advance,

Hi Vivek,
I tried following steps in local POC:
1. Install 9.3.1,
2. Upgrade it to 9.3.3,
3. configure it.
but getting issue with "Server and cluster registration" I am getting error as, "An error occurred while adding Cluster to the list."
Any idea how to resolve it? I am not able to configure HFM 9.3.3 client.
and also I can see *"Web server, Related Content & Smart view provider tabs in configuration utility"*, along with error while opening two of these three tabs *"Failed to obtain IIS version. Please check the IIS installation"*
I found one document on support but it was not much helpful.
*Server Configuration Tabs in the Server and Web Configuration Utility Are Available on Windows 7 Machines with Only Desktop Client Installed. [ID 1367553.1]*
Thanks,

Cannot Install 11g 64 bit client on Windows 7 Professional 64 bit OS

I am trying to install Oracle 11g 64 bit client on Windows 7 64 Bit Professional. I'm running setup as administrator and all prerequisites fail with Actual Value not Found Expected value not found. I select ignore and press next and the application just silently shuts down. Log is too big so here is an abbreviated log.
Here is the installation log
Thanks in advance!
Using paramFile: C:\temp\win64_11gR2_client\client\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
INFO: Initial values of Setup Properties :
PROPERTY VALUE
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\temp\win64_11gR2_client\client\install\../stage/produc
ts.xml
INSTALL_TYPE InstantClient
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME xxx-xxxxxxx-xxx.xxx.xxxxxxx.xxx
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
oracle_install_LaunchNetCA false
oracle_install_NoMigration true
oracle_install_RACInstall false
oracle_install_WindowsSystemDirectory
oracle_install_client_OraMTSPortNumber 2030
oracle_install_db_ConfigurationType
oracle_install_db_InstallEdition EE
oracle_install_db_InstallType
INFO: Launching Oracle Client Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state init
INFO: Waiting for completion all forked tasks at state init
INFO: All forked task are completed at state init
INFO: Completed background operations
INFO: Executing action at state init
INFO: Completed executing action at state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <init>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <init>
INFO: Completed validating view at state <init>
INFO: Validating state <init>
WARNING: Validation disabled for the state init
INFO: Completed validating state <init>
INFO: Verifying route success
INFO: Get view named [InstallTypesUI]
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: View for [InstallTypesUI] is oracle.install.ivw.client.view.InstallTypesGUI@94b318
INFO: Initializing view <InstallTypesUI> at state <clientInstallType>
INFO: InstallTypesPane installType is: InstantClient
INFO: Completed initializing view <InstallTypesUI> at state <clientInstallType>
INFO: Displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Completed displaying view <InstallTypesUI> at state <clientInstallType>
INFO: Loading view <InstallTypesUI> at state <clientInstallType>
INFO: Completed loading view <InstallTypesUI> at state <clientInstallType>
INFO: Localizing view <InstallTypesUI> at state <clientInstallType>
INFO: size estimation for InstantClientinstall is 199.0705451965332
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: size estimation for Runtimeinstall is 751.6538038253784
INFO: Completed localizing view <InstallTypesUI> at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state clientInstallType
INFO: Completed executing action at state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <clientInstallType>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Client Install Type set in InstallTypeUI is : Administrator
INFO: Validating view at state <clientInstallType>
INFO: Completed validating view at state <clientInstallType>
INFO: Validating state <clientInstallType>
WARNING: Validation disabled for the state clientInstallType
INFO: Completed validating state <clientInstallType>
INFO: In Transition of InstallTypesAction:
INFO: Verifying route ic_no
INFO: Get view named [ProductLanguageUI]
INFO: View for [ProductLanguageUI] is oracle.install.ivw.common.view.ProductLanguageGUI@74d175ff
INFO: Initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed initializing view <ProductLanguageUI> at state <productLanguage>
INFO: Displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Fetching Available Languages...
INFO: Completed displaying view <ProductLanguageUI> at state <productLanguage>
INFO: Loading view <ProductLanguageUI> at state <productLanguage>
INFO: Completed loading view <ProductLanguageUI> at state <productLanguage>
INFO: Localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Completed localizing view <ProductLanguageUI> at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state productLanguage
INFO: Waiting for completion all forked tasks at state productLanguage
INFO: All forked task are completed at state productLanguage
INFO: Completed background operations
INFO: Executing action at state productLanguage
INFO: Completed executing action at state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <productLanguage>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: The languages in which the product will be installed are [en]
INFO: Validating view at state <productLanguage>
INFO: Completed validating view at state <productLanguage>
INFO: Validating state <productLanguage>
INFO: Using default Validator configured in the Action class oracle.install.ivw.common.action.ProductLanguageAction
INFO: Completed validating state <productLanguage>
INFO: Verifying route productlanguage_yes
INFO: Get view named [InstallLocationUI]
WARNING: Active Help Content for InstallLocationPane.cbxOracleBases do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxOracleBases.conciseHelpText
WARNING: Active Help Content for InstallLocationPane.cbxSoftwareLoc do not exist. Error :Can't find resource for bundle oracle.install.ivw.client.resource.ContextualHelpResource, key InstallLocationPane.cbxSoftwareLoc.conciseHelpText
INFO: View for [InstallLocationUI] is oracle.install.ivw.client.view.InstallLocationGUI@3850620f
INFO: Initializing view <InstallLocationUI> at state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Completed initializing view <InstallLocationUI> at state <getOracleHome>
INFO: Displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Completed displaying view <InstallLocationUI> at state <getOracleHome>
INFO: Loading view <InstallLocationUI> at state <getOracleHome>
INFO: Completed loading view <InstallLocationUI> at state <getOracleHome>
INFO: Localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Completed localizing view <InstallLocationUI> at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOracleHome
INFO: Completed executing action at state <getOracleHome>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOracleHome>
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOracleHome>
INFO: Completed validating view at state <getOracleHome>
INFO: Validating state <getOracleHome>
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: InstallAreaControl exists: false
INFO: Checking:NEW_HOME
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:COMP
INFO: Checking:ORCA_HOME
INFO: Reading shiphome metadata from C:\temp\win64_11gR2_client\client\install\..\stage\shiphomeproperties.xml
INFO: Loading beanstore from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: Translating external format into raw format
INFO: Restoring class oracle.install.driver.oui.ShiphomeMetadata from file:/C:/temp/win64_11gR2_client/client/install/../stage/shiphomeproperties.xml
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: inventory location isC:\Program Files\Oracle\Inventory
INFO: size estimation for Administratorinstall is 1068.0003070831299
INFO: PATH has :==>C:\Users\xxxxxxxx\AppData\Local\Temp\OraInstall2012-04-17_11-11-24AM\jdk\jre\bin;.;C:\windows\system32;C:\windows;C:\app\xxxxxxxx\Oracle\product\11.2.0\client_win32\bin;C:\windows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\OEM\12.0\DLLShared\;C:\Program Files (x86)\Roxio\OEM\AudioCore\;C:\Program Files\TortoiseSVN\bin;C:\Program Files (x86)\Microsoft SQL Server\80\Tools\Binn\;C:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft Visual Studio 8\Common7\IDE\PrivateAssemblies\;c:\Program Files\Microsoft SQL Server\90\DTS\Binn\
INFO: Completed validating state <getOracleHome>
INFO: InstallLocationAction to INVENTORY_NO
INFO: Verifying route INVENTORY_NO
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state prereqExecutionDecider
INFO: Completed executing action at state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prereqExecutionDecider>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prereqExecutionDecider>
INFO: Completed validating view at state <prereqExecutionDecider>
INFO: Validating state <prereqExecutionDecider>
WARNING: Validation disabled for the state prereqExecutionDecider
INFO: Completed validating state <prereqExecutionDecider>
INFO: Verifying route executeprereqs
INFO: Get view named [PrereqUI]
INFO: View for [PrereqUI] is oracle.install.commons.base.interview.common.view.PrereqGUI@64d90254
INFO: Initializing view <PrereqUI> at state <checkPrereqs>
INFO: Completed initializing view <PrereqUI> at state <checkPrereqs>
INFO: Displaying view <PrereqUI> at state <checkPrereqs>
INFO: Completed displaying view <PrereqUI> at state <checkPrereqs>
INFO: Loading view <PrereqUI> at state <checkPrereqs>
INFO: Completed loading view <PrereqUI> at state <checkPrereqs>
INFO: Localizing view <PrereqUI> at state <checkPrereqs>
INFO: Completed localizing view <PrereqUI> at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state checkPrereqs
INFO: custom prereq file name: oracle.client_Administrator.xml
INFO: refDataFile: C:\temp\win64_11gR2_client\client\stage\cvu\oracle.client_Administrator.xml
INFO: isCustomRefDataFilePresent: false
INFO: Completed executing action at state <checkPrereqs>
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state checkPrereqs
INFO: Waiting for completion all forked tasks at state checkPrereqs
INFO: Creating PrereqChecker Job for leaf task Physical Memory
INFO: Creating CompositePrereqChecker Job for container task Free Space
INFO: Creating PrereqChecker Job for leaf task Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp
INFO: Creating PrereqChecker Job for leaf task Architecture
INFO: Creating PrereqChecker Job for leaf task Environment variable: "PATH"
INFO: CVU tracingEnabled = false
INFO: Preparation of nodes for running verifications failed. Reason:
- Cause Of Problem Not Available
INFO: *********************************************
INFO: Physical Memory: This is a prerequisite condition to test whether the system has at least 128MB (131072.0KB) of total physical memory.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Free Space: xxx-xxxxxxx-xxx:C:\Users\xxxxxxxx\AppData\Local\Temp: This is a prerequisite condition to test whether sufficient free space is available in the file system.
INFO: Severity:IGNORABLE
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO: -----------------------------------------------
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: All forked task are completed at state checkPrereqs
INFO: Completed background operations
INFO: Moved to state <checkPrereqs>
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Expected value not found.
INFO: Actual value not found.
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <checkPrereqs>
INFO: Completed validating view at state <checkPrereqs>
INFO: Validating state <checkPrereqs>
INFO: Using default Validator configured in the Action class oracle.install.ivw.client.action.PrereqAction
INFO: Completed validating state <checkPrereqs>
INFO: Verifying route success
INFO: Get view named [SummaryUI]

I disagree with your assessment, for two reasons.
One is the severity for RAM is listed as Severity:IGNORABLE.
Secondly I just saw this happen to myself just a moment ago (which is how I found this threat) as well using a silent install on a Windows 2008r2 server I can install to using the setup.exe manually. so disk and memory really isn't an issue.
I suspect something else is going on here. If you read those warnings the Critical they are just the last two about disk space and the PATH variable. Perhaps I am not running as elevated as I thought or the C$ share is not reach able. I am going to keep trying and will report back here when I get my silent install working.
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: Error Message:PRVF-4001 : Check: Space available on "C:\Users\xxxxxxxx\AppData\Local\Temp"
INFO: Cause: Could not determine mount point for location specified.
INFO: Action: Ensure location specified is available.
INFO: *********************************************
INFO: Architecture: This is a prerequisite condition to test whether the system has a certified architecture.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO:
INFO: Verification Result for Node:xxx-xxxxxxx-xxx
WARNING: Result values are not available for this verification task
INFO: *********************************************
INFO: Environment variable: "PATH": This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
INFO: Severity:CRITICAL
INFO: OverallStatus:OPERATION_FAILED
INFO:

How To Install Informatica and DAC Client on windows

Dear Friends,
I had installed Oracle Informatica 8.6.1 and Oracle DAC Server (10.1.3.4.1) on Linux server (RHEl 32 bit)
Now i want to install Informatica and DAC Clients on windows machine.
Where to download the software and in the existing Dump i don't find any install.bat file / client folder as mentioned in some sites.
Please help
Regards,
DB

Hi,
When you have downloaded the informatica software you will get 2 zip files (V20952-01_1of2.zip,V20952-01_2of2.zip). When you Unzip these two files you will find pc861_client_win32_x86.zip file.
Unzip this pc861_client_win32_x86.zip file and browse to this location pc861_client_win32_x86\Client\Disk1\InstData\VM, here you will find install.exe an executable file.This will install informatica client.
For installing DAC browse to this location DAC 10.1.3.4.1\dac\Disk1\install\win32 and there you will find setup.exe executable file. This will install DAC.
If you need further information plz do post it......
Thanks,
Navin Kumar Bolla

Install Oracle 11.2.0.3 32Bit Client on Window 7 x64

Good morning,
I just tried to install the new Oracle 11.2.0.3 32Bit Client on Windows 7 x64, most of it
works - just the OLEDB drivers are not registered ... does anyone know
how to register them manually ? the 11.2.0.2 Client works fine ....
And please don't answer "use the 64 Bit client". This is not the solution - since I have
a lot of programs that still need the 32 Bit Client ...
By the way the update from 11.2.0.2 to 11.2.0.3 does not work ... the installer fails ....
Thanks for any info.
Nils

Hi Nils;
Please see below notes:
Is Microsoft Windows 7 certified to install/run Oracle Database Server/Client ? [ID 952302.1]
Also see:
Master Note For Oracle Database Client Installation [ID 1157463.1]
Regard
Helios

Failed to install 64-bit Oracle client on Windows 8.1

I just tried to install the 64-bit client on Windows 8.1 with 16GB of ram.
First of all, I got the INS-13001 warning that my environment does not meet minimum requirements, even though I was just installing a client!
I chose to ignore the warning and installed anyway.
It doesn't look like the install completed successfully.
For one thing, it did not create a bin folder.
Also when I tried to remove it using the OUI, I was told to use the deinstall utility in the deinstall folder, which is not there either.
How am I supposed to remove this seemingly incomplete installation?

Hans Forbrich wrote:
An example of what you are trying to do, by analogy:
You have a truck engine (Oracle)
It was designed for a 2007 Volvo truck body.
You are trying to put it into a 2010 Ford truck body.
Why are you surprised it does not fit? (or if it fits, why it is not quite correct!)Please tell me where I indicated "surprise"?
Actually, what I was trying to do was get a serious answer rather than a smart-a$$ response.
If you've used software a little, you would realize that saying something is not yet "formally supported" does not mean that there is not a way to make it work. TONS of software does not yet claim it will work with Windows 7, but somehow magically it does. Possibly with problems or issues to workaround, but functional.
I was asking, if on my development machine, there is a way to make the current client work.
In any event - it turns out installing the 32-bit client rather than the 64-bit client does seem to make most things work, at least well enough for my current needs.
Thank you for your very informative response anyway.

Error during installing oracle client on windows XP

Hi everybody,
I want to install Oracle Client on Windows XP. I downloaded and installed Client version 10g on several PCs. But one of them gives me error - 'oui.exe - error'. Cant start oui.exe. Is it problem of Windows XP or ? I just cant start GUI of OUI.exe...
regards,
rustam

1. Check the administrative privilege of that windows machine.
2. Copy the binaries of client again in your machine. It may be corrupted.
3. Restart your machine and try again.
Regards
Asif Kabir

""i Can't Install oracle 10g client in windows Vista"

hello,mr or mrs
i need help for install oracle10g client in windows vista???? cause there error when i install
"abnormal program termination.an internal error has occured.please provide the following files to oracle support : "unknown"
"unknown"
"unknown"
please help me .......???

hello
Operating System
vista home is not support
Oracle Database for 32-bit Windows is supported on the following operating systems:
Windows 2000 with service pack 1 or later. All editions, including Terminal Services and Microsoft Windows 2000 MultiLanguage Edition (MLE), are supported.
Windows Server 2003 - all editions
Windows XP Professional
Windows NT is not supported.
Oracle Database for Windows x64 is supported on the following operating systems:
Windows Server 2003, Standard x64 Edition
Windows Server 2003, Enterprise x64 Edition
Windows Server 2003, Datacenter x64 Edition
Windows XP Professional x64 Edition
Windows Vista x64, Service Pack 1 - Business, Enterprise, and Ultimate editions
Windows Server 2008 x64 - Standard, Enterprise, Datacenter, Web, Standard without Hyper-V, Enterprise without Hyper-V, and Datacenter without Hyper-V editions
The specific operating system components that are not supported are Windows Server 2008 x64 Hyper-V and Server Core

TES 5.3.1 Client on Windows 7 in XP Mode

Similar Messages

Maybe you are looking for