TES v6.1 want to install a Win Tidal Agent on a Cluster Resource with Fail Over... help

I am working with my Window Admins and they want to know how to install the Win Tidal Agent on a Cluster Resource with Fail Over.  Currently running Tidal Master (UNIX) v6.1.0.483
Thanks,
Rich

Please refer to the Agent Installation and Configuration guide.pdf from Cisco. The steps to configure the agents in a cluster have been explained in section Configuring the Agents for a Cluster

Similar Messages

  • I have a new MacBook Air with Yosemite (no CD/DVD capacity). I want to install Photoshop Elements 6. Can I do this with the serial number? If pse 6 is not compatible, can I upgrade to pse 7. I do not need pse 12 or 13.

    I have a new MacBook Air with Yosemite (no CD/DVD capacity). I want to install Photoshop Elements 6. Can I do this with the serial number? If pse 6 is not compatible, can I upgrade to pse 7. I do not need pse 12 or 13

    I cannot answer regarding compatibility, but there is no download available for PSE6 if you would need one for this.  You might be able to copy the installation files from a disk to some other removable media that the machine accepts.  Upgrading to PSE7 would not be possible mainly because Adobe does not sell older versions of their software.

  • I want to install Indesign CC 2014. Once unpacking, the file installation fails. Since: 'it's impossible to unpack to temporary folder (EX11)'. How to resolve?

    I want to install Indesign CC 2014. Once unpacking, the file installation fails. Since: 'it's impossible to unpack to temporary folder (EX11)'. How to resolve?

    Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
    Mylenium

  • Want to install foliobuilder in Indesign CS5. Cannot sign in with my Adobe ID

    Or do I need a membership on DPS...

    Thanks...
    Hans van der Kooi
    8-13 Grafisch ontwerpers
    Vrijheidslaan 21-2
    1079 KB Amsterdam
    020-400 40 81
    Op 3 dec. 2014 om 21:04 heeft Neil Enns - Adobe <[email protected]> het volgende geschreven:
    Want to install foliobuilder in Indesign CS5. Cannot sign in with my Adobe ID
    created by Neil Enns - Adobe in Digital Publishing Suite - View the full discussion
    DPS no longer supports CS5. You'll either need a copy of CS6, or will need Creative Cloud.
    Neil
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6983365#6983365 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6983365#6983365
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Digital Publishing Suite by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • When i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    when i want to install windows7 on my snow leopard(10.6.4) with boot camp assistant,said that you must update your mac,i do this and try to install windows7 again but i have this problem again?what can i do?

    Graham Giles wrote:
    Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
    No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
    TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
    •  I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
    There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
    On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
    I know that using a cloned drive would work well in this instance.
    I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
    With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

  • I want to change my primary e-mail address that I use with Apple ID - help guide says Select Edit next to "Apple ID and Primary Email Address." But there is no 'edit' on that section there is on every other but not that one. Can anyone help?

    I want to change my primary e-mail address that I use with Apple ID - help guide says Select Edit next to “Apple ID and Primary Email Address.” But there is no 'edit' on that section there is on every other but not that one. Can anyone help?

    You can create an alias @icloud.com email address within your current account that will receive email in your current iCloud inbox (see http://help.apple.com/icloud/#/mm6b1a490a).  (@me.com addresses are no longer available as new addresses.)  Just be aware that you cannot use an alias address later to create a new iCloud account or move it to a different account.
    Also, even if you created a new iCloud account with a new ID, your existing purchases would not be lost.  They are permanently tied to the original ID you used to purchase them.  You can also continue to use the existing ID for the iTunes store; it does not need to be the same as the ID you use for iCloud.

  • How to install and configure OEM agent in VCS cluster

    Hi there,
    I would like install 11g OEM agent for SUN SPARC OS for two node VCS cluster. OEM repository is residing in another server.
    Database (to be configured) is running on one node of VCS cluster, but it will be able to failover other server for any issues.
    I have downloaded the agent for sparc and planning to do the silent install.
    Could you please give me the steps to configure both nodes of the cluster including the parameters which need to be changed in the response file?
    Thanks in advance.
    Regards

    We are using OEM agents on VCS clusters. Some options are to 1) fail-over the agent with the database; 2) manually inform OEM that an instance has moved using emcli relocate_targets; 3) use VCS to relocate_targets through a fail-over script. Since our databases don't move much we have been using option 2 but are now testing option 3.
    Doug

  • I want to install the Win XP on Satellite A305-S6905

    Hi.
    I want to downgrade my Vista to XP because of the problems and slowing down my PC..
    For example i can't download updates on antivirus, games etc..
    I have readed in the forum that i need some kind of sata drivers and those i can do myself but can someone help me with the other drivers because I'm using this laptop for 1 hour and i dont know what drivers it needs.
    If someone could give me links to the needed software i would be very thankfull.
    Thanks.

    Hello
    > For example i can't download updates on antivirus, games etc..
    I think the reason for this is why you dont have installed a driver for the WLAN and/or LAN card.
    So you should check the Toshiba US website to download all drivers for your notebook that you need. Jimi did already post the link to the website.
    Just download each driver and install it. Thats all.
    The SATA drivers that you mean Well thats right if you want to use the AHCI mode. This mode is faster as the compatible mode so is the experience of some users here. You can change the mode in BIOS but if you are running the compatible mode you cant switch to the AHCI mode because you will only get a BSOD if you boot into Windows. Therefore you must reinstall Windows.
    As far as I know your notebook is equipped with an Intel chipset and so you need the Intel Storage Manager package. This package contains the SATA drivers and you must integrate the drivers with an external FDD after you have booted from the Windows XP if you press F6. Therefore I can prefer this workaround:
    http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm
    If you dont have an external FDD you can use nLite to integrate the drivers as me. This tool is freeware and very easy to use ([www.nliteos.com]).
    So I think thats all that you must know and if you have problems to integrate the drivers you can search a little bit in the forum. You will find hundreds of threads about this because this procedure is on every notebook the same.
    Greets

  • I want to install my WIN 7 via USB. How is that possible?

    Hi People.
    I just opened my new T530 Laptop pakage, that arrived some minutes ago. Since it was delivered by a company selling to students only, it didnt come with a operating system. So what i did is, i just threw the WIN 7 30-days testverion onto my USB stick, and my SD card as well. I used the "Windows 7 USB DVD Download Tool". Since i have the official thing, i dont think theres a problem with the software anyhow.
    So now i have put in my USB and my SDcard seperately but neither one is bootable. Or maybe i just dont know how to do that. Could you please help me figuring out my problem? I would like to set up my system this night, so i would be very glad for some responses
    My Computer is giving me the options to shoose between:
    "ATAPI DVD RW"
    "ATA HDD0"
    "PCI LAN"
    But those are the wrong devoces...
    Please help
    Kind regards
    Alex

    In the boot menu, select your USB.
    If not, enter BIOS, go to boot options, and add/move USB HDD/FDD/ZIP to the top of the boot sequence.

  • How to install and configure management agents on Tru64 Cluster

    We are busy rolling out the Oracle 10g Grid Control to our enterprise and one of our targets is a two-node Tru64 cluster with shared file systems, i.e., each node can see (read/write) the file systems concurrently. Trucluster software is responsible for the clustering management.
    On node1 we have a set of databases each with its own dedicated listener; the same for node2. Each cluster managed service set has its own logical hostname. For example, we have on node1:
    db1 (database)
    listener-db1 (listener for db1)
    node-db1 (logical hostname for db1 service)
    Upon switchover or failover, the database and listener are brought up on node2 and we need to cater for this in our management agent configuration. I am trying to work out how we install and configure the management agents in such a configuration. Has anyone done this or does anyone know how to set up the agents suitably?
    I have already installed the agent on one of the nodes - that worked fine, and I have even managed to start another agent up using the installed software home on the other node using "agentca -f"

    You the Cluster type of configuration. It is documented in the install guide you have

  • Howto use a Mac to download firefox.exe to flash drive to install on Win XP SP3 box?

    Want to install Firefox on a new Acer Aspire 1 (ZG8) with Win XP 2002 SP3 without setting up MS Explorer. I want to do that by downloading Firefox to a USB stick, then transfer it to the Acer and install there. But my only other computer is a Mac Book Pro (OS X 6.8), and Mozilla only offers me a version for Mac. How do I use the Mac to download a windows .exe file to a portable flash drive? If I use a Linux distro and VirtualBox with my Mac, would that allow me to choose the apprpriate download for MS Win XP 2002 SP3?

    Thanks, Nerevakiin! Don't know how I missed that link. Have just downloaded the .exe file. :-) Thanks again.

  • FaceTime can't be installed on "Macintosh HD" because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion

    FaceTime can’t be installed on “Macintosh HD” because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion.any help with this would be greaty appreciated.

    FaceTime is included in Lion. The App Store version is for 10.6. If you deleted it, restore it from a backup, or reinstall the Mac OS.

  • I bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do hlp?

    i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do to install my bootcamp and apple software in win 8
    thanks in advance,,,

    ahmad_uetlhr09 wrote:
    i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook
    Boot Camp does not come on DVD, what did you install.

  • Pleae help me: I want to install oracle developer on win server 2008

    please help me i am try to install oracle developer 10g on win server 2008 but failed because the version of operating system not 5 or 5.1 or 5.2 and it is 6
    so i want to install oracle developer 11g on win server 2008 but i am not found oracle developer 11g to download it
    please any one help me to solve this problem or help me to find oracle developer 11g
    Thank you

    Oracle Developler 11g is now called Oracle Fusion Middleware (FMw) 11g and can be downloaded from the Oracle Fusion Middleware Downloads page. You have to download and install WebLogic Server (WLS) 10.3.3 first, then scroll down and download and install Portal, Forms, Reports and Discoverer (11.1.1.3.0).
    When you install WLS, make sure you do not run the configuration step. When you install FMw, it will configure the WLS as part of it's configuration step.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • I want to install win 8 but...

    Hello
    I want to install win 8 but not with Boot camp. So I downloaded my drivers and win 8 and I burned its DVD but when I want to install, at the select disc, I get an error about  windows can not be installed on this drive because partition map is GPT. I formatted two partitions as FAT32 and by PARAGON NTFS as NTFS. But I cannot.
    Can someone help me?

    Or better yet install and run your Windows8 on a VM like ParallelsDesktop.
    http://www.parallels.com/products/desktop/

Maybe you are looking for