Test a channel sender JMS

Hi all!
can you send me a software or method to test a channel sender JMS? If is possible a guide step.
Thanks in advance!
Note: We are working with SAP Netweaver 7.1
Edited by: ecruz2010 on Aug 25, 2011 8:51 PM
Edited by: ecruz2010 on Aug 25, 2011 8:54 PM

Steps:
1. Install & Configure a Websphere MQ server (you may use other Java Messaging servers too)
2. Create a queue on this server
3. deploy the JMS driver for this MQ Server on your PI Server (Serach on SDN for the steps)
4. Configure a scenario in PI where JMS is the Sender Adapter. Take a look at the following for the same:
http://help.sap.com/SAPHELP_nwpi711/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
5. Post a message to the queue on the MQ Server
6. The Sender JMS channel picks up that message from the queue and starts processing it.
7. The message flow proceeds as per your scenario configured in SAP PI.
Hope this helps.
Regards, Gaurav.

Similar Messages

  • Zip or unzip a payload in sender JMS channel

    Hi,
    My scenario is to unzip a payload in sender JMS channel and I have configured the sender JMS module in the below format,
    Processing sequence
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    Module Configuration
    Modulekey            Parameter Name                    Parameter Value
    zip                        zip.mode                                unzip
    I have tried this format also,but it is not working
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    (or)
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    While performing testing,it throws the below error in sender JMS channel,
    The detailed error (if any) is :  com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: while trying to invoke the method java.lang.String.length() of a null object loaded from local variable pattern: NullPointerException: while trying to invoke the method java.lang.String.length() of a null object loaded from local variable 'pattern'at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:185)
    Can someone help me on how to extract a payload in sender JMS channel.
    Also please guide me on how to extract a multiple payloads in one zip file in sender JMS channel.

    Hi,
    Your module sequence seems to be incorrect.
    Try like this,
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    (or)
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    Regards,
    Praveen Gujjeti

  • Unzip a payload in sender JMS channel

    Hi,
    My scenario is to unzip a payload in sender JMS channel and I have configured the sender JMS module in the below format,
    Processing sequence
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    Module Configuration
    Modulekey            Parameter Name                    Parameter Value
    zip                        zip.mode                                unzip
    While performing testing,it throws the below error in sender JMS channel,
    The detailed error (if any) is :  com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: while trying to invoke the method java.lang.String.length() of a null object loaded from local variable pattern: NullPointerException: while trying to invoke the method java.lang.String.length() of a null object loaded from local variable 'pattern'at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:185)
    Can someone help me on how to extract a payload in sender JMS channel.
    Also please guide me on how to extract a multiple payloads in one zip file in sender JMS channel.

    Hi,
    Your module sequence seems to be incorrect.
    Try like this,
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    (or)
    SAP XI JMS Adapter/ConvertJMSMessageToBinary     Local Enterprise Bean       convert_JMS2Bin
    AF_Modules/PayloadZipBean Local Enterprise Bean    Local Enterprise Bean       zip
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage     Local Enterprise Bean       convert_Bin2XI
    CallSapAdapter                                                         Local Enterprise Bean      call_AF_MS
    Regards,
    Praveen Gujjeti

  • IgnoreRecordsetName not working in Sender JMS channel- PI 7.1

    Hello All,
    In Sender JMS content conversion I have used xml.ignoreRecordsetName=true
                                                                                       ignoreRecordsetName=TRUE
    But still I am getting "Recordset" in the XML due to which message mapping is getting failed.
    Can you please tell me what is the correct syntax for this parameter in JMS channel
    Regards,
    Moorthy

    Hi
    ignorerecordset  parameter dont support  using the message transform bean.

  • Sender JMS Synchronous communication channel not picking up files from JMS

    Hello,
    One of our Sender JMS synchronous communication channel (used Sync/Async bridge in the module section to make it Synchronous) is not picking up files from JMS system though the channel looks to be active (greeen).
    When I am trying to stop the channel, it is giving error as "1 of 1 administered and selected channels have not been stopped", and after this when I start the cannel again it shows green but not picking up any files.
    if anyone is haivng any solution for this, please reply back.
    Thanks in advance.

    Messages available in JMS system? please check queue's if message were there and it is not picking up then some thing wrong with cc.
    simple solution create new communication channel with same details and try to use the same.

  • How to set errorDelay parameter in sender JMS Communication Channel?

    Dear XI/PI Experts,
    Do you happen to have a documentation on how to implement the errorDelay parameter and other general parameters in the sender Sender JMS communication Channel? Do you happen to have a step by step guide or pdf that I can use?
    I look forward to hearing from you.
    Thanks a lot in advance.
    Kind regards,
    Grace

    Hi Thanks for your replies.
    What I need to do is to implement this bullet point:
    ¡        errorDelay
    The default value for this parameter is 0.
    This parameter determines how long the system waits before processing further messages if an error occurs. In transactional processing, it can make sense to specify a certain time period, for example, because messages with errors remain in the queue following a ROLLBACK.
    In which part of the Sender JMS Comm Channel will I implement this?
    Should I put this under tab /Parameters/Processing/Error Handling Settings or should this be under /Parameters/Advanced/Additional Paremeters?

  • Sender JMS Channel Error

    Hi all,
    I have been facing with this problem with sender JMS channel, any pointers as to where can be the solution for it
    The error details are as follows
    JMS and XI identifiers for the message are ID:414d512056515933444e41575445202048aa8802235bad01 and a2d32e30-7aae-11dd-ae1c-001125cc0c0c respectively. The JMS adapter will rollback the database and JMS session transactions. If the session is transacted, the message is not lost and will be retried later. The exception stack trace is java.lang.Exception
    at com.sap.aii.af.service.jms.WorkerJMSReceiver.onMessage(WorkerJMSReceiver.java:963)
    at com.ibm.mq.jms.MQMessageConsumer.receiveAsyncQ(MQMessageConsumer.java:2539)
    at com.ibm.mq.jms.MQMessageConsumer.receiveAsync(MQMessageConsumer.java:4262)
    Messages are not being placed in the Queue. the Queues are newly created is there something which has been missed out during the creation of the Queues
    Rgds
    Aditya

    Hi Aditya
    Try this way:
    1. uncheck JMS transactional session check box in JMS sender communication channel.
    2. Once it is done, insert new message in JMS queue.
    Thanks
    Sai

  • Content conversion in Sender JMS channel

    Hello All,
    My scenario is JMS to Proxy. SAP PI receives a flat file from JMS application.
    Can any one please help us on converting flat file to XML conversion within sender JMS adapter
    Thanks&Regards,
    Moorthy

    Hi
    Check this
    conversion type StructPlain2XML
    conversion type SimplePlain2XML

  • Duplicate Message exception in sender JMS comm channel

    Hi,
    Can any one please tell me what is stored in MSG_ID1 and MSG_ID2  in table XI_AF_SVC_ID_MAP
    I could only find the schema of XI_AF_SVC_ID_MAP table in SDN which is as follows,
    MSG_ID1 (varchar),
    MSG_ID2 (varchar),
    PERSIST_UNTIL (timestamp).
    We have an interface in where MQ daily sends 2 files to PI but sometimes one msg is getting discarded by sender JMS adapter giving warning  -
    A duplicate message was received, it was received earlier and processed with XI Message ID - "xyz". It will be ignored and discarded from the JMS queue.
    Also I found that setting option Time Period for Duplicate Check for EO(IO) (secs)  to 0 does not always work.
    We are getting this problem after upgrading PI from 3.0 to 7.1.
    So if any one has solution to this problem please help me.
    Thanks & Regards,
    Shweta

    Hi Shweta
    Usually this kind of issue happens when the msg ID in the MQ message header is not unique.
    Ask the MQ team to ensure that MQ msg ID is always unique.
    Regards,
    Giuseppe

  • Content conversion by using sender JMS channel

    Hi All,
    I have developed a scenario from JMS to Idoc. I need to read flat files by using sender jms adapter. I have configured message transform bean in module tab and respective content conversion parameters as well. My flat files contains different structures. So I need to use conversion type as StructPlain2XML. Based on keyField value I am diffentiating flat file records. My requirement is I have to give two spaces in <xml.keyFieldValue> parameter. fixed Length of keyFieldValue is 6, Actual value getting from source file is DEST. I need to pass two spaces as per fixed length specification. I have passed two spaces, but after activating spaces are removed by system bydefault. Because of this an empty file is processed by PI. Source file contains two spaces after DEST. I need to read two spaces along with DEST value as keyFieldValue. How to achieve this..
    Thanks in advance.
    Best Regards,
    Ashok.

    Hi Ashok
    You can resolve this by splitting the field into two fields - and actual key field and a dummy/temp field.
    I've just blogged about this technique, you can refer to it here
    Content Conversion for fixed length files with key field value shorter than key field length
    Rgds
    Eng Swee

  • Sender JMS Connectivity not working

    Hi All,
    We have developed a scenario where we have to pick messages from DTS JMS queue and we are using JMS provider with JNDI as the sender transport protocol. We have deployed the jar files given by the DTS team successfully in our XI 3.0 system and we have configured the sender JMS channel. Since this queue is in another NWDS sever, we have also set Additional JMS parameters: JNDI.InitialContext.property.5=java.lang.String force_remote, java.lang.String true.
    But when we are testing, I am getting the below error in Adapter monitoring :
    Sender channel. Details: com/sap/jms/client/connection/RemoteConnectionFactoryInterface (Unsupported major.minor version 49.0)
    Please let me know if I have missed any parameters or any suggestions to solve the issue.
    Thanks,
    Laawanya

    Hello Stefan - Thanks for response.
    Here are the Parameters.......
    Adapter Type: JMS
    Sender Type Clicked
    Transport protocol:WebSphereMQ (non-JMS)
    Message protocol:JMS 1.x
    Adapter Engine:Integration Server
    Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
    Queue Java Class:com.ibm.mq.jms.MQQueue
    IP Address or Server Name:10.9.48.154
    Server Port:1414
    Queue Manager Name:WBIDEV
    Channel Name:WBI.XI.SVRCONN
    JMS Queue:XI_REQUEST
    Transport/Network Protocol:TCP/IP
    JMS-Compliant:JMS-Compliant
    Transactional JMS Session:Check box Set
    JMS Queue User:XIUSER
    JMS Queue Password:********
    Set XI message ID(MessageID) to:GUID(recommended value)
    Set XI cenversation ID(conversationID) to:No value
    Mapping of Message:Message Payload=JMS Payload
    Quality of Service:Exactly Once
    Time Period for duplicate check for EO(IO)(secs):86400
    Wait After Message Error(msecs):1000
    Wait before Reconnect(msecs):1000
    Status:Active
    The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
    Pls advice If I am missing anything ?
    Thanks....
    Amrish.

  • Problem in sending JMS message on remote OC4J

    I have two OC4J standalone (10.1.3.0.0 build 041119.0001.2385)
    The containers work on Windows2000 in different machines connected by the LAN.
    The First container has deployed application from example http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-jca-intro/doc/how-to-jca-intro.html
    The second container has j2ee application (Servlet) that sending JMS messages in the queue of the first container.
    Code Servlet in second OC4J:
    package mypackage2;
    import javax.servlet. *;
    import javax.servlet.http. *;
    import java.io. PrintWriter;
    import java.io. IOException;
    import javax.jms. *;
    import javax.naming. *;
    import java.util. *;
    public class Servlet1 extends HttpServlet
    private static final String CONTENT_TYPE = "text/html;charset=windows-1251";
    public void init (ServletConfig config) throws ServletException
    super.init (config);
    String QUEUE_NAME = "OracleASjms/MyQueue1";
    String QUEUE_CONNECTION_FACTORY = "OracleASjms/MyQCF";
    public void doGet (HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
    response.setContentType (CONTENT_TYPE);
    PrintWriter out = response.getWriter ();
    out.println (" < html > ");
    out.println (" < head > < title > Servlet1 < /title > < /head > ");
    out.println (" < body > ");
    try
    Hashtable env = new Hashtable ();
    env.put (Context. INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory");
    env.put (Context. SECURITY_PRINCIPAL, "admin");
    env.put (Context. SECURITY_CREDENTIALS, "admin");
    env.put (Context. PROVIDER_URL, "ormi://host_OC4J_1:23791/jcamdb");
    env.put ("dedicated.rmicontext", "true");
    InitialContext ic = new InitialContext (env);
    QueueConnectionFactory connectionFactory = (QueueConnectionFactory)ic.lookup (QUEUE_CONNECTION_FACTORY);
    QueueConnection connection = connectionFactory.createQueueConnection ();
    connection.start ();
    QueueSession queueSession =
    connection.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
    Queue queue = (Queue) ic.lookup (QUEUE_NAME);
    ic.close ();
    System.out.println (" Queue: " + queue);
    QueueSender sender = queueSession.createSender (queue);
    System.out.println (" creating Message: " + queue);
    Message message = queueSession.createMessage ();
    System.out.println (" Message created ");
    message.setJMSType ("theMessage");
    message.setLongProperty ("time", System.currentTimeMillis ());
    message.setStringProperty ("id", "11111");
    message.setStringProperty ("oamount", "55555");
    message.setStringProperty ("message", "77777");
    message.setStringProperty ("RECIPIENT", "MDB");
    System.out.println (" Sending message... ");
    sender.send (message);
    System.out.println (" Message sent ");
    sender.close ();
    queueSession.close ();
    connection.close ();
    catch (Exception e)
    System.out.println (" ** TEST FAILED ** < br > Exception: " + e);
    out.println (e.toString ());
    e.printStackTrace ();
    out.println (" < p > The servlet has received a GET. This is the reply. < /p
    ");out.println (" < /body > < /html > ");
    out.close ();
    Error: This code send message in The First container, and should send in the second OC4J !!!!
    Please answer :
    As configure (what code it is necessary to write) servlet (any J2EE the application in OC4J) to use a path to OC4J JMS (remote OC4J JMS) through the Resource Adapter (using OracleASjms.rar). ???

    I have two OC4J standalone (10.1.3.0.0 build 041119.0001.2385)
    The containers work on Windows2000 in different machines connected by the LAN.
    The First container has deployed application from example http://www.oracle.com/technology/tech/java/oc4j/1013/howtos/how-to-jca-intro/doc/how-to-jca-intro.html
    The second container has j2ee application (Servlet) that sending JMS messages in the queue of the first container.
    Code Servlet in second OC4J:
    package mypackage2;
    import javax.servlet. *;
    import javax.servlet.http. *;
    import java.io. PrintWriter;
    import java.io. IOException;
    import javax.jms. *;
    import javax.naming. *;
    import java.util. *;
    public class Servlet1 extends HttpServlet
    private static final String CONTENT_TYPE = "text/html;charset=windows-1251";
    public void init (ServletConfig config) throws ServletException
    super.init (config);
    String QUEUE_NAME = "OracleASjms/MyQueue1";
    String QUEUE_CONNECTION_FACTORY = "OracleASjms/MyQCF";
    public void doGet (HttpServletRequest request, HttpServletResponse response)
    throws ServletException, IOException
    response.setContentType (CONTENT_TYPE);
    PrintWriter out = response.getWriter ();
    out.println (" < html > ");
    out.println (" < head > < title > Servlet1 < /title > < /head > ");
    out.println (" < body > ");
    try
    Hashtable env = new Hashtable ();
    env.put (Context. INITIAL_CONTEXT_FACTORY, "oracle.j2ee.rmi.RMIInitialContextFactory");
    env.put (Context. SECURITY_PRINCIPAL, "admin");
    env.put (Context. SECURITY_CREDENTIALS, "admin");
    env.put (Context. PROVIDER_URL, "ormi://host_OC4J_1:23791/jcamdb");
    env.put ("dedicated.rmicontext", "true");
    InitialContext ic = new InitialContext (env);
    QueueConnectionFactory connectionFactory = (QueueConnectionFactory)ic.lookup (QUEUE_CONNECTION_FACTORY);
    QueueConnection connection = connectionFactory.createQueueConnection ();
    connection.start ();
    QueueSession queueSession =
    connection.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
    Queue queue = (Queue) ic.lookup (QUEUE_NAME);
    ic.close ();
    System.out.println (" Queue: " + queue);
    QueueSender sender = queueSession.createSender (queue);
    System.out.println (" creating Message: " + queue);
    Message message = queueSession.createMessage ();
    System.out.println (" Message created ");
    message.setJMSType ("theMessage");
    message.setLongProperty ("time", System.currentTimeMillis ());
    message.setStringProperty ("id", "11111");
    message.setStringProperty ("oamount", "55555");
    message.setStringProperty ("message", "77777");
    message.setStringProperty ("RECIPIENT", "MDB");
    System.out.println (" Sending message... ");
    sender.send (message);
    System.out.println (" Message sent ");
    sender.close ();
    queueSession.close ();
    connection.close ();
    catch (Exception e)
    System.out.println (" ** TEST FAILED ** < br > Exception: " + e);
    out.println (e.toString ());
    e.printStackTrace ();
    out.println (" < p > The servlet has received a GET. This is the reply. < /p
    ");out.println (" < /body > < /html > ");
    out.close ();
    Error: This code send message in The First container, and should send in the second OC4J !!!!
    Please answer :
    As configure (what code it is necessary to write) servlet (any J2EE the application in OC4J) to use a path to OC4J JMS (remote OC4J JMS) through the Resource Adapter (using OracleASjms.rar). ???

  • Problem with special character like u00E5,u00E4 u00F6 in Sender JMS Adapter

    Hi,
    Problem:
    Sender JMS Adapter has transformation error when the file includes western european characters such as å,ä ö. And because of this reason the data is not picked up by adapter.
    The scenrio is JMS --- > XI ---> Proxy.
    If the file does not include the western European characters then it is working fine, but when the file include the western european characters such as å, ä, ö so got the error.
    Our Efforts:
    We have tried ISO8859-1 in JMS Module Tab as shown below.
    1. Transfer.ContentType text/xml;charset=ISO-8859-1
        AND with this also
    2. Transfer.ContentType application/coctet-stream;charset=ISO-8859-1
    None of them working.
    Error In CC:
    In Sender CC monitoring we are getting the below error.
    Error while processing message 'aa157082-b064-4421-0fc3-c286d2732093'; detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Error converting Message: sun.io.MalformedInputException: TransformException: Error converting Message: 'sun.io.MalformedInputException' at com.sap.aii.adapter.jms.core.channel.filter.SendToModuleProcessorFilter.filter(SendToModuleProcessorFilter.java(Compiled Code)) ...
    Any suggestion in this regard will be a great help.
    Regards,
    Sarvesh

    > I think you have to figure out first, which codepage you really have, not just try. Maybe you ask someone or you check with a hex editor.
    Hi Stefan,
    Finally we solved the problem.
    As you said above to figure the the codepage, we asked to our MQ team for the same and found that they are using ISO-8859-1. In XI we were also trying with multiple conbinations (ISO-8859-1, UTF-8 and many more), but didn't get any success.
    Finally MQ team changed their encoding to UTF-8 and in XI we used ISO-8859-1 and we get the success in picking the data with spl char. Even though in XI the spl char comes in destorted order but at the receiver end they are in proper shape.
    Thanks a lot for your help.
    Regards,
    Sarvesh

  • Sender JMS Adapter - NOT Working

    Hello Everybody - We are on SP13, also installed JMS Driver files on the system. We are running, Central Adapter Engine.
    We configured the Sender JMS Adapter for WBI MQ->XI->SAP scenario. We need to JMS Adapter to be configured to connect to WBI from XI. Everything looks great in configuration but in the Adpater Monitoring, JMS Adapter is with Error Status and Message says "Sender channel. Details: (No detail information set.)".
    Does anybody has any idea about this error ?
    I checked SAP Help link as well on this. Based on this link http://help.sap.com/saphelp_nw04/helpdata/en/ca/e7673c86d19b35e10000000a11402f/frameset.htm. Do we need to configure this JMS Adapter somewhere on teh server as well ? If yes, then where ? Pls respond if you have any clue about it.
    Thanks in anticipation...

    Hello Stefan - Thanks for response.
    Here are the Parameters.......
    Adapter Type: JMS
    Sender Type Clicked
    Transport protocol:WebSphereMQ (non-JMS)
    Message protocol:JMS 1.x
    Adapter Engine:Integration Server
    Queue ConnectionFactory Java Class:com.ibm.mq.jms.MQQueueConnectionFactory
    Queue Java Class:com.ibm.mq.jms.MQQueue
    IP Address or Server Name:10.9.48.154
    Server Port:1414
    Queue Manager Name:WBIDEV
    Channel Name:WBI.XI.SVRCONN
    JMS Queue:XI_REQUEST
    Transport/Network Protocol:TCP/IP
    JMS-Compliant:JMS-Compliant
    Transactional JMS Session:Check box Set
    JMS Queue User:XIUSER
    JMS Queue Password:********
    Set XI message ID(MessageID) to:GUID(recommended value)
    Set XI cenversation ID(conversationID) to:No value
    Mapping of Message:Message Payload=JMS Payload
    Quality of Service:Exactly Once
    Time Period for duplicate check for EO(IO)(secs):86400
    Wait After Message Error(msecs):1000
    Wait before Reconnect(msecs):1000
    Status:Active
    The Error Message I see in the Adapter Monitor is "Sender Channel. Details: (No detail information set.)
    Pls advice If I am missing anything ?
    Thanks....
    Amrish.

  • Sender JMS adapter configuration for IBM MQSeries

    Dear All,
    i am doing a IBM MQSeries 5.2.x Message ->sender JMS adapter -> XI server -> receiver RFC adapter -> R/3.
    i have deployed the JMS adapter with the required jar files of IBM MQSeries 5.2.x in XI server.
    in Sender JMS adapter configuration for IBM MQSeries 5.2.x, i have put following data:
    1. Transport Protocol: Websphere MQ - is it okay?
    in JMS provider settings:
    2. in channel name - what should be there?
    3. Transport Network protocol should be TCP/IP or WebsphereMQ - how to decide this thing.
    4. JMS Complaint - whether WebsphereMQ or JMS API.
    in JMS Settings:
    5. JMS Queue user - is this IBM MQSeries 5.2.x Queue User or someother user?
    6. JMS Message Selector - what data to take here.
    So if anybody has connected IBM MQSeries 5.2.x to XI via JMS adapter, please answer my above queries.
    Regards,
    Rajeev Gupta

    Hi Swaroop,
    you can send me those documents at my gmail-id : [email protected]
    Hi All,
    one more question - to connect XI server to IBM MQSeries via JMS adapter in ID, do we need to have a MQSeries Client installed on XI server - or - just by configuring JMS adapter, we can send messages from IBM MQSeries to XI server without any MQSeries client on XI server?
    Why Channel name is required in JMS configuration data?
    Thanks,
    Rajeev Gupta

Maybe you are looking for