Test ABAP Proxy

Hi,
I need to test inbound ABAP Proxy from XI? My integration scenario is between WebService and ABAP proxy. Can I test Proxy from XI without the involvement of WebService?
Regards,
Ram

<b>I would like to test the design & configuration objects in XI also</b>
u can test the message mapping and interface mapping ...but for objects like...Data Type ,message type,Message interface ...u cant test...i mean...u r only designing here....and in Directory....receiver D, Interface D etc...also u cant test... u can just check ..wheather u have given the correct entry or not....here u r just configuring.......To test ur whole scenario... u have to send data from sender system to receiver system via XI...
<b>Is there any way I can trigger a message as a sender?</b>
No u can't.....
Use a Good Subject Line, One Question Per Posting - Award Points

Similar Messages

Testing a abap proxy

Hi,
can anyone let me know how to test abap proxy?
regards,
somu

HI
DEBUGGING ABAP PROXIES
https://weblogs.sdn.sap.com/pub/wlg/4098--Debugging [original link is broken] [original link is broken] [original link is broken]
TESTING ABAP PROXY
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
ABAP Proxies:
https://weblogs.sdn.sap.com/pub/wlg/2828--Integration [original link is broken] [original link is broken] [original link is broken] Builders through proxy server
https://weblogs.sdn.sap.com/pub/wlg/4224---EOIO [original link is broken] [original link is broken] [original link is broken] in ABAP Proxies
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachmentsRFC or ABAP Proxy ?ABAP Proxies with attachments
https://weblogs.sdn.sap.com/pub/wlg/5447--How [original link is broken] [original link is broken] [original link is broken] to raise alerts from ABAP Proxy
https://weblogs.sdn.sap.com/pub/wlg/4100--Smarter [original link is broken] [original link is broken] [original link is broken] Approach for coding ABAP Proxies
regards
Kishore

ABAP Proxy guide?

Dear all
i am a ABAPer,as abap mapping is done, i am about to test ABAP proxy,
my XI have two client(100, 200) for proxy.
but it is not easy to understand ABAP proxy for me,
even though i've read relevant to ABAP proxy on this site. and i could not follow this.
so is there a sample guide document by step by step?
i will highly be appreciated in advance.
thank you
Y.D

3. Proxies :
Proxies are used for connecting to SAP systems.....
when you design new integration scenarios in SAP systems which are based on Web AS 6.20 or higher.
Proxies support both Synchronous and Async. Connectivity.
and for inbound interfaces are called server proxies.
Prerequisties foe abap proxies:
-register queues in sxmb_adm.
-HTTP destination on SAP system (on which proxy is developed) pointing to XI
system.
- configure your SAP system to act as IE using SXMB_ADM transaction.
>>what are proxies used for and how good they are..
http://help.sap.com/saphelp_nw04/helpdata/en/86/58cd3b11571962e10000000a11402f/content.htm
Refer to these links :
http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
abap:
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy
/people/siva.maranani/blog/2005/05/23/communication-between-sap-system-webservice-using-proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
regards..
vishal

ECC dev to new PI sandbox to be point in ABAP proxy configuration

Hi All ,
We are testing ABAP proxy configuration between ECC Dev and PI new system (sand box) .
FYI : Currently ABAP proxy configuration running fine between ECC DEV and PI DEV system .
Now we have to testing ABAP proxy configuration between ECC Dev and PI new system (sand box) .
Pls advise what needs to be done.
thanks

Dear All,
Any relation between SLD and Abap proxy configuration ?
FYI:
1,ECC SLD is running fine with PI DEV sysytem (PI7.1).
2,in ECC SAPSLDAPI RFC destination program id is pointing to PI DEV system .
3,In Ecc LCRSAPRFC RFC destination program id is pointing to PI DEV system .
4, PI DEV system is PI7.1
5, PI Sandbox is PI 7.4 SP06 (note : currently we are testing all the interface , PI scenario in new sand box - it is newly upgraded PI system . )
6.In ECC SXMB_adm -> Role of Business System -> Application system
Corresponding Integ. Server -> dest://RFCDESTINATION (H connection type RFC created in ECC SM59.
Below is my question.
1, Latest PI version required H og G type connection ?
2, SLD (sldapicust,lcrsaprfc,sldapicust,rz70)related information needs to point to PI new upgraded dsystem for ABAP proxy testing in new sand box?
pls advise.

ABAP Proxy error during runtime but success for manuall test ?

Hi,
I got scenario using inbound ABAP proxy. The problem is when i test the inbound proxy manually, it was sucessfully, but then if i run directly from sender got problem :
Error during proxy processing An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING clause The function call of ZPSCD_CTRACCOMOBJECT_CREA failed; a field may have been assigned to the parameter ZCOM_COMPDHDR whose type is not compatible with this parameter
Please help
Regards

Fernand,
As stated in the exception, there is a compatibility issue between source and target fields, but without further details (msg definitions etc), we can't tell you exactly what's wrong ...
What's the ABAP type of ZCOM_COMPDHDR field in your RFC function module ?
Rgds
Chris
PS : also check the msg content to make sure generated field is compatible with the expected type (manual test was successful because you set it to the suitable value, whereas in "real" situation there is discrepancy)
Edited by: Christophe PFERTZEL on Apr 28, 2008 1:22 PM

Testing SOAP/ XML in ABAP Proxy!

Hi Experts,
In an interview I was asked a question on abap proxy.
In a scenerio where data from file gets into R/3 ztable through abap proxy, when data has already left XI and about to enter r/3, there is some SOAP XML format , and data can be tested/ debugged at this point. I was not sure about the exact point, but surely not the payload in SXMB_MONI.
Can any1 tell me more about this part of Abap proxy testing.The interviewer said, this is popular testing of abap proxy scenerio . I am also sure, I am not asking for how to debug Abap coding in the method endmethod part in SPROXY .
Can any1 help!
Regards,
Arnab.

Hi Arnab,
In sproxy choose your interface and
go with menu proxy---> Test interface
follow the link which gives u step by step procedure
XI: Debug your inbound ABAP Proxy implementation
Regds,
Shiva

I want to test sender ABAP proxy in AAE by SOAP client

To PI Specialists
Now I plan to test sender ABAP proxy in AAE by SOAP client system.
(we use aae so we set sender abap proxy by sender soap adapter.)
ABAP creating team and PI creating team are in other site.We cant contact easily.
I want to separate ABAP Unit test and PI Unit test, plan to use soap client for test driver.
(we use SOAPUI. )
the url is http://<host>:<port>/XISOAPAdapter/MessageServlet?channel=party:service:channel
I noticed that sender soap adapter is started, but the messeage protocol is invalid.
we use messege of wsdl. it must be XI3.0 protocol.
Please tell me XI3.0 protocol.
Naoki

This is possible to do in SOAPUI. I am testing this scenario using AAE, but I am also using SOAP UI Pro. The procedure is pretty basic. Instead of sending your payload in as part of the body, you have to send it in as an attachment. You will also need to set the header correctly. Here is a sample message from my SOAP UI tests that may help. The only thing you need to do differently is load the attachment, name it, and make sure that the name of the attachment is reflected in the SAP:Payload attribute. Also, I am using a Groovy script to create a GUID.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
<soapenv:Header>
<SAP:Main versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92FFF13F5C59777FE1ABE00000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
            xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
   <SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
   <SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
   <SAP:MessageId>${Create GUID#result}</SAP:MessageId>
   <SAP:TimeSent>${=new java.text.SimpleDateFormat("yyyy'-'MM'-'dd'T'HH':'mm':'ss'Z'").format(new Date())}</SAP:TimeSent>
   <SAP:Sender>
    <SAP:Service>SVCNM</SAP:Service>
   </SAP:Sender>
   <SAP:Interface namespace="Interface_Namehttp://namespace.com">Interface_Name</SAP:Interface>
</SAP:Main>
<SAP:ReliableMessaging SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
</SAP:ReliableMessaging>
<SAP:System SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SAP:Record namespace="http://www.sap.com/webas/712/soap/features/runtime/metering/" name="CallingType">SA</SAP:Record>
</SAP:System>
<SAP:Diagnostic SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SAP:TraceLevel>Information</SAP:TraceLevel>
   <SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
<SAP:HopList SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
   <SAP:Hop timeStamp="${=new java.text.SimpleDateFormat("yyyy'-'MM'-'dd'T'HH':'mm':'ss'Z'").format(new Date())}" wasRead="false">
    <SAP:Engine type="BS">SVCNM</SAP:Engine>
    <SAP:Adapter namespace="XIhttp://sap.com/xi/XI/System">XI</SAP:Adapter>
    <SAP:MessageId>${Create GUID#result}</SAP:MessageId>
    <SAP:Info>3.0</SAP:Info>
   </SAP:Hop>
</SAP:HopList>
</soapenv:Header>
<soapenv:Body>
<SAP:Manifest wsu:Id="wsuid-main-92FFF13F5C59777FE1ABE00000A1551F7" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink"
                xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
   <SAP:Payload xlink:href="cid:TestPayload.xml">
    <SAP:Name>MainDocument</SAP:Name>
    <SAP:Description/>
    <SAP:Type>Application</SAP:Type>
   </SAP:Payload>
</SAP:Manifest>
</soapenv:Body>
</soapenv:Envelope>
Here is a picture of my SOAP UI project in case it help the understanding.

Activate abap proxy withou java stack on ECC side

Hi gurus,
Can we activate abap proxy on ECC side if the ECC don't hava java stack? As you know , we need to create two jco RFC provider in Visual Administrator, but without installing java stack, we can't do that. Any ideas? Thanks in advance.

Thanks all.
Solved by using program id of XI system in the RFC of application system.
But we still face the issue in SPROXY. It gave the error "No connection to Integration Builder ".
Then I runned connection test, and found SPROX_CHECK_IFR_ADDRESS and SPROX_CHECK_HTTP_COMMUNICATION
are right, but SPROX_CHECK_IFR_RESPONSE and SPROX_CHECK_IFR_CONNECTION are giving the error "Integration Builder data not understood". Any ideas?
Edited by: xinjiang li on Sep 10, 2010 6:40 PM

SAP PI 7.4 SOAP - ABAP Proxy Synchronous Webservice

Hi Everyone,
I am developing the following scenario:
3rd party makes a SOAP call to SAP (via PI) to determine whether a vendor exists or not in the SAP system. The link for the call is provided by us from the Integrated Configuration.
The request comes in, calls an ABAP Proxy to check if a vendor exists and sends a response back to the SOAP call with a 'Y' or an 'N'.
I've read a lot about various scenarios but I'm having trouble connecting the dots as I'm fairly new to PI. I'd appreciate any help.
I've made the following set-up based on assuming I need separate Service Interfaces for the SOAP Request & Proxy Response
ESR
1. Message Types
     SOAP (MT_SOAP_REQ & MT_SOAP_RESP) - PROXY (MT_PRXY_REQ & MT_PRXY_REQ)
2. Message Mappings
     MM_REQUEST    which maps MT_SOAP_REQ   to MT_PRXY_REQ)
     MM_RESPONSE which maps MT_PRXY_RESP   to MT_SOAP_RESP)
3. Service Interfaces (Synchronous)
    (SOAP Request)
    SI_IN (Inbound Interface)       with Request = MT_SOAP_REQ and Response = MT_SOAP_RESP
   (Proxy Response)
    SI_OUT (Outbound Interface) with Request = MT_PRXY_REQ and Response = MT_PRXY_RESP
4. Operation Mapping
    OM_LOOKUP which maps SI_IN to SI_OUT with Request    (MT_SOAP_REQ to MT_PRXY_REQ)
                                                                    and Response (MT_SOAP_RESP to MT_PRXY_RESP)
I create the ABAP Proxies for each Service Interface. SI_IN contains the required coded method to check if there is a vendor.
I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
ID
In the Integration Directory I've created a SOAP_SENDER communication channel for System A and SOAP_RECEIVER channel for SAP. For the SOAP Receiver I need to specify a URL - what should this be ? Is it meant to point to the web service for SI_IN in SICF or just to the generic http://host:8000/sap/xi/engine?type=entry
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
I created an Integrated Configuration for the SI_IN Service Interface with comm channel SOAP_SENDER from System A and SOAP_RECEIVER for SAP backend. I then got the WSDL for this to provide to the 3rd Party to test (via SOAP UI) . Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
I appreciate you taking the time to go through this . Any help is greatly appreciated.
Thanks very much
Gary

I create the webservice and binding for SI_IN in SOAMANAGER
At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation) to get the response.
>>>>No need to do anything in SOAMANAGER
Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
>>> No. Soap adapter is fine. Configure your receiver channel as explianed in the below blog (section 4.3)
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
>>>>Your receiver determination and interface determination takes care of this.(receiver interface & outbound processing tabs in ICo)

Can ABAP proxy to consume WSDL file be run as background job for every10min

Hi all,
I have a requirement where I need to build an interface which gatheru2019s the purchase order details and send to external third party software in their required format (as an XML file).
So I should be the first point of contact and should trigger the interface each time a purchase order is generated.
So I am thinking that I should develop a background job for every 10 minutes which will look for new purchase orders and gathers the information of the purchase orders and send them to external third party software in their required format.
I have gone through all the SAP forums and e-Learning but still I have confusion in regards to how is it possible technically? Can some one guide me with some information on the same.
I have a little bit of confusion and want to know few things.
1)     Should I create a web service or should I consume a web service?
2)     If I need to consume a web service, then can I write an ABAP proxy to be run in background fro evry 10 minutes? I mean can we run ABAP proxy as a batch job in the background?
3)     Is there a difference between consuming an XML file and WSDL File?
Any Help will be highly appreciated.
Regards,
Jessica.

There are two options (as I know) to generate XML file.
1. Use XML TRANSFORMATION to get the XML string based your TRANSFORMATION. You can input your data and get back the XML string. Download this string to a file
Test XML generation program is:
types: begin of ty_data,
       num   type i,
       end   of ty_data.
DATA: itab TYPE standard table of ty_Data,
      la_data like line of itab,
      xmlstr TYPE string.
DO 3 TIMES.
la_data-num = sy-index.
APPEND la_data TO itab.
ENDDO.
CALL TRANSFORMATION ztest_np1
SOURCE table = itab
RESULT XML xmlstr.
CALL FUNCTION 'DISPLAY_XML_STRING'
EXPORTING xml_string = xmlstr.
My ZTEST_NP1 transformation. To create a transformation, click on the transformation in the "CALL TRANSFORMATION ztest_np1" statement. Select Simple transformation type.
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="table"/>
<tt:template>
    <table>
      <tt:loop ref=".table">
        <item>
          <tt:value ref="NUM"/>
        </item>
      </tt:loop>
    </table>
</tt:template>
</tt:transform>
XML string is like:
<?xml version="1.0" encoding="utf-8" ?>
<table>
<item>1</item>
<item>2</item>
<item>3</item>
</table>
To use this option, you have to create a transformation and than use it to generate the XML string.
Check this SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/7d4719ca581441b6841f1054ff1326/frameset.htm
2. You can concatenate and create an XML string and download that string into a file.
Regards,
Naimesh Patel

ABAP Proxy error

Dear Friends,
I am facing a problem when i use a ABAP client proxy (asynchronously)
An error is raised during proxy method call-
<CODE>SERIALIZE_APPLICATION_DATA</CODE>
<b> <ERRORTEXT>Conversion error ABAP => XML (Request Message; error ID: CX_ST_INVALID_XML;
(/1SAI/TAS00000000000000000005 XML Bytepos.: 0 XML Path:
Error Text: Executing the operation '&OPERATION&' leads to an invalid XML document) )</ERRORTEXT></b>
The same proxy runs fine in upstream system (dev) but doesnot run in downstream system (QA) even though all proxy objects have been transferred.
This proxy & another proxy from the same calling report program is serialized in a queue.The first proxy is raising this error, but the second proxy call is successful.
Can someone help,
Thanks
Prasenjit

Hi Guru,
All the fields in the data type have string - also this roxy works fine in devpt. system- but it doesnt work in downstream QA system.
Other proxy interfaces in the QA system work fine.
The error message when i single test the proxy is as follows-
- <CX_XMS_SYSTEM_ERROR>
<ID>SERIALIZE_APPLICATION_DATA</ID>
<P1>Request Message</P1>
<P2>CX_ST_INVALID_XML</P2>
<P3>/1SAI/TAS00000000000000000005</P3>
<P4>XML Bytepos.: 0 XML Path: Error Text: Executing the operation '&OPERATION&' leads to an invalid XML document</P4>
<INFO />
<CATEGORY>XIProxy</CATEGORY>
<AREA>ABAP</AREA>
<CX_ST_ERROR>
<ST_PROGNAME>/1SAI/TAS00000000000000000005</ST_PROGNAME>
<X-ML_OFFSET>0</X-ML_OFFSET>
<X-ML_PATH />
<ST_IC>2</ST_IC>
<ST_TIMESTAMP>20070907163313</ST_TIMESTAMP>
</CX_ST_ERROR>
Any other possible solutions ?
thanks
Prasenjit

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

ABAP proxy exception to SOAP fault and vice versa not getting mapped

Hi there,
I have these scenario's: ABAP proxy to SOAP (AXIS framework) and the other way around, synchronous, using AAE.
When declaring the Synchronous Service interfaces we also defined error message types in order to pass system and application exceptions back to the service consumers.
The behavior we are observing is as follows;
When an exception is generated on the ABAP proxy, the error message type is correct generated and filled with the corresponding values in the ABAP proxy runtime. However, when the response arrives at the service consumer, it only contains a SOAP fault filled with some kind of generic PI mapping exception information.
1. Why is the original ABAP proxy exception not mapped/passed into the SOAP response?
2. What can we do in order to change that situation?
3. Does it has to do with the use of the AAE - Advanced Adapter Engine or the AXIS framework?
PS: We have performed a test of the Operation Mapping - OM using the ABAP exception as input and it did work correctly, so the error structure seems to be Ok.
Many thanks for your replies.
Edited by: Roberto Viana on Jul 26, 2010 8:30 PM

Problem was caused by some differences in namespaces between source and target.

Business partner replication using ABAP proxy

Hello,
I want to send vendor master data records from the MDM to SAP SRM. There is a standard ABAP proxy interface in the SRM for this purpose and this proxy is also being used by the standard PI content for MDM.
Do you have any experience with this interface? I have done some test cases and I missed the logging. In PI I don't get any feedback if the business partner has been created or not. And in case it was not, there is no detailed error description. Neither in SXMB_MONI in the PI nor in the SXMB_MONI in the SRM.
Is there any other monitoring tool for this interface?
Would you recommend to use this interface in production, or would you prefer to use the BAPI interface?
Any comment appreciated.
BR,
Jürgen

Hi Jürgen,
yes I worked on a similar scenario, we were distributing customers to CRM, which is the dual of vendors in SRM, and at the end is just a different role of the business partner.
The Proxy I used is the standard proxy ABABusinessPartner, which is part of the standard content, and we never had problem using this object (productive since more than a year).
What is strange to me is that you do not see any trace in SXMB_MONI, you should see the message in both XI and SRM and when a message is in error you should see the trace there with a description of the issue.
Regarding Acknowledgement I think you have to configure MDM to request an acknowledgement since the ack only comes back if the first sender of the message request it.
Hope this help.
Ciao,
Sergio

Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

Dear Experts,
I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
Cc monitoring in NWA.
1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
local IE i.e. Tx SXMB_MONI.
Note : In NWA , I can see only 1 message that too in cancelled status.
2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
it should in ACTIVE status in Tx SMQR..
Regards
Rebecca

Hi Thomas,
Valuable inputs..
1. Since I don't have any audit log for successful message, would you be able to share referring to the
below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
Regards
Rebecca

Test ABAP Proxy

Similar Messages

Maybe you are looking for