Test Asset Creation

HI,
We are migraqting our legacy assets to sap. No asset shell is created yet, but config. is done for AA. I need to test our dep.keys for different asset classes if its working as per our needs.So for that I just wanted to creates 4,5 assets manually in the system as regular assets thru AS01. then delete it afterward.Do I need to take some other things in account while creating those test assets or I can just create it as a regular asset.
Regards
Shaun

Hi,
Are you going to create those test assets in your production client?
Then create those assets with AS91 with cap date, which is same as your legacy asset takeover date.
In the takeover values tab of AS91, enter only APC values and then save it.
So if you see the asset explorer for that asset you can see the depreciation calculation in terms of palnned values according to the dep keys.
Dont post any F-90 or any other acquistion entries to your assets in PPD client.
Once you feel that your dep keys are working good as per client's requirement, then do OABL to reset that data in your PPD sys.
OABL is not recommened to do in PPD client
Thanks,
Srinu

Similar Messages

  • User Exit / Badi / BTE for Asset creation A ?

    Hi Experts,
    I need User Exit  / BADI / BTE for asset Creation.
    After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
    i have tried all this.But no one is triggering after saving the As01 transaction.
    Exit Name           Description                                                                               
    AAPM0001            Integration of asset accounting and plant maintenance                    
    AFAR0003            External changeover method                                               
    AFAR0004            Determination of proportional values for retirement                      
    AINT0004            Change amount posted for certain areas                                   
    AINT0005            Dummy for extended syntax check. Do not use.                             
    AISA0001            Assign Inventory Number                                                  
    AIST0001            Exchange number range in master data maintenance                         
    AIST0002            Customer fields in asset master                                          
    AMSP0002            Determine relationship type for two company codes                        
    TRAN0001            User exit for asset transfer           
    Please suggest if anybody worked on this.
    regards,
    Imran

    Hi,
    Check out the following posts pertaining to similar topic.
    Change Asset Workflow
    Asset Management WORKFLOW
    Regards
    Sreekanth

  • User Exit/BADI for AS01 ( Asset Creation )

    Hi Xperts,
    My requirement is during asset creation in AS01, after asset generated i want to send asset no, subno, asset creation date, int. order no to ztable.
    Can anyone suggest user exit/BADI which suit this requirement.
    I have gone through forum search, but not found suitable object.
    Ram.

    Hi Ram,
    Check out below Badi and Enhancement
    BADI
    IHSA_LIST_EDITING
    ENHANCEMRNT
    EXIT_SAPLAAPM_002
    EXIT_SAPLAIST_001
    EXIT_SAPLAIST_002
    EXIT_SAPLAIST_003
    THANKS & REGARDS
    G.Vendhan
    Edited by: vendhan g on Jul 24, 2009 12:33 PM

  • FM or BAPI to test HU creation using Packing instruction in test mode

    Hi SAP Gurus,
    Can you guys help me in finding out an appropriate FM or BAPI thourgh which systme will create HU using Packaging instructions.
    I have Packaging instructions are setup as master record and Determination proceudre is also created.
    Just wanted to simulate or test the creation of HU using Packaging instructions.
    Regards
    G.Naveen

    Hi,
    Use BAPI : BAPI_HU_CREATE to create HU.
    Regards,
    Vishal

  • Automatic Asset creation through Project settlement

    Dear All,
    We have one issues where in AS02 AUC Asset quantity is in display mode still we can find the quantity there.
    Can any body help me about the Process of Auto Asset creation through Project settlement.
    I need to know how system calculate the Quantity from the Project settlement. if such type of Process exist in SAP
    Thanks
    Abhijeet
    Edited by: Abhijeet  Patil on Oct 5, 2011 3:05 PM
    Edited by: Abhijeet  Patil on Oct 5, 2011 3:05 PM

    Hi,
    There is process in SAP where we can create AuC from Projects. We need to have an investement profile set up and the same needs to be used in the project. You will have the details in SAP Help documnetation for this.
    Regards
    Sreekanth

  • Plant & business area validation in asset creation

    Dear All,
    Am working in a plant & business area validation which will fire the error msg when wrong plant is assigned at time of asset creation. Issue is for a company we have 19 business area and each business area assigned to various plant. In order to avoid the individual step for each business area, have merged two or more business area in pre-requiste section and correspondingly plant had been validated in check section. But when am inserting two check conditions, its not even working as per the logic, For ex :
    Pre-Requiste :
    ( ANLA-BUKRS = '1300' AND ANLZ-GSBER = '1101' ) AND (
    ANLA-BUKRS = '1300' AND ANLZ-GSBER = '1102' )
    Check :
    ( ANLZ-WERKS = '1307' OR ANLZ-WERKS = '1308' OR ANLZ-WERKS = '1309' OR ANLZ-WERKS = '1304' ) AND
    ( ANLZ-WERKS = '1305' OR ANLZ-WERKS = '1306' ANLZ-WERKS = '1344' )
    For the above condition system not validating as per business area since if we entering business area 1101 and entering the plant which related to 1102 business area, system not throwing the error msg where as if we put a single condition in a step its working fine.
    Kindly suggest me how to overcome this by avoiding individual step creation for each business area.
    Regards,
    Balaji.c

    Hi,
    I have chnaged my validation in the following way as follows,
    Pre-requiste :
    Co code=XXXX
    Check:
    Business area = XXXX AND Plant = XXXX.
    This condition is working fne for one business area, where as if i include more than one business area in the check section system not validating the condition, in a step its validating only one condition. Since 21 business area available for a co code its not feasible to create individual step.
    Kindly suggest me is there any other alternative way to overcome this.
    Regards,
    Balaji.c

  • Any USER EXIT or BADI  for modification in ME21N Asset Creation

    Hi Guyz,
    We have a requiremnt where we need to put some validaion/check in Asset Creation of ME21N,
    Any possible BADIs or USER EXIT available for this modification.
    Pease help.
    Thanks
    Jaif

    Hi Jaif,
    For BADIs please go to SE24 put cl_exithandler diplay it and put the break-point execute the transaction for which you want to find out badi you will get the badi name in exit name parameter.
    Regards
    Sagar

  • Test Plan creation in Solutoin manager Production

    Hi
    We have the Solution and Blue print updated in the Solman production System.  The test system is quite old and does not have the update Solutoin or the Blue print .  As we have updated Testcases & processes in production system, we would like to create a test plan (using test organizer) directly in the production system.  But the system is not allowing creation of test plan in Productoin and system is expecting us to create in test and transport to Produciton.  As we do not have the updated process/solution in the test, the creation of test plan in Test has no meaning and cannot be used.  What is the way out to resolve our problem.  Also guide us the procedure to create test plans directly in Produciton system and highlight us if there is signifcant impact.
    Regards
    Srini

    Hi Srini
    You are asking why it is not possible to do directly in solman production
    the answer is same if you ask for ECC PRD or BI PRD why we have 3 tier landscape simply because PRD is not a test system or training system all the configuration development happen in ECC/BI dev then we move the request to QA for testing
    Samething if you create a Test Plan in Solution Manager PRD where you expect to do the testing for your configuration.
    Moreover where are you planning to train your Actual Tester's who will use your Test Plan.
    Last you have to open the client for changes to happen in PRD do you think is it correct it ?
    Hope I have explained or clarified your doubt
    Regards
    Prakhar

  • Asset Creation Event Error

    Hi All
    I have a requirement to start a workflow when an asset is created. I am using BUS1022. I have created and activated the linkage.
    The entry in SWED exists for change doc: ANLA and the table ANLA
    I have created a similar entry in SWEC for the event CREATED.
    When i create an asset, the event does get triggered but there is an error., In SWEL it shows up as
    Check FM with exception.
    Receiver type :TS00001003
    Message: Element FLAG_ANLAGE_BEARB is not available in the container
    Check FM: AWFC_CHECK_ASSET_INCOMPLETE
    Now I Have created the above mentioned element in my workflow and passed it the values in binding.
    Where do i have to define this parameter? It is required in the parameters of the event---.
    Thank you

    Hi,
    I am using other workflows like PR, PO, SO and too many WF templates, for those workflows also the event trace is not getting. But the workflows are getting triggered with out any problem.
    Steps for event trace is SWELS for switch on the event trace and then executing the transaction (AS01) then after I am checking the event trace by using SWEL.
    Can you pls advise the proper way for getting event trace, if I am not using the proper way.
    Can any body explain the process for Asset creation.
    Is there any equipment needs to be created before of after of Asset creation. I thougt, depends on this the CREATED event get triggers.
    Thanks in adv.
    Krish.

  • Main asset creation

    Hi Experts
    I got problem,
    In Asset creation AS01, At Depreciation areas Tab, There is no fields are appear i.e empty
    Please solve it
    Thanks
    Vas143

    HI,
      Please check the screenlayouts for Asset classes and also the filed status for Dep areas tab for Asset master record. It should not in the suppressed status.
    Thanks

  • Asset Creation in PR and PO and MIGO as a single Line item with "N" qty

    Hi All,
    In Purchase requestion ME51N
    Now we are creating "n" number of assets ( All are same item but "s.no" will vary) with "n" number of line item.
    Instead of this I have to enhance to create only one line item( For same item) with "n" quantity.
    for the ASSET account Assignment we have to create Asset(Temp no) for the each item/quantity(if the same item).
    as well as if they are going to create a PO with ref to PR they have to see all the "n" number of asset no.
    In MIGO creation for each asset we have to assign S.No and Asset Tag.
    How enhance the functionality in PR,PO and MIGO as well as in Invoice.
    Is it any User Exit/BADI is available for PR/POand MIGO to show all the "n" number of assets for a single line item.
    Kindly help me to give details to proceed further.
    Thanks in advance.
    sharma

    Hi Sharma,
    What i understand from your question is, you want to create a single line item in PR and PO. But the qty would be > 1.
    Each single qty would have its own asset number in account asssignment tab of item details of PR & PO.
    This is what you are expecting...Right???????????????
    Then this is possible with certain limitations.
    While creating PR, enter only one item with more qty.
    In item details section, in account assignment tab, on top left corner, there will be a button called Multiple account assignments.
    Click on it, then it looks like a table, where you can enter more than one line. (each line will have its own asset no)
    And choose option Distribute on qty basis for field Distribution.
    So that you can enter 1 qty for each line. ( Ex: if you created one line item in the item level with 10 qty, you need to maintain 10 line here, each qith 1 qty and diff asset no).
    The only limitation to this is, the GRN would be treated as non valueted. So when you make GRN there wwould not be any accounting doc. ( means no use of GR/IR clearing account as like normal for POs)
    when you prepare MIRO, all the assets will be capitalised and vendor credited.
    But in case if you receive partial invoice, then you have choose manually in MIRO. which asset is ot be capitalised.
    After entering the PO number in MIRO, there will be one line will be appeared with full qty. in the same line, move till the end of line, there you will have one button called Account assignments.
    Choose and go there, here you can choose which individual asset line to be considired.
    This will resolve your issue.
    Thanks,
    Srinu
    SRBORIGI_MULTIPLE ACCOUNT ASSIGNMENTS

  • Error During ECATT test script creation

    Hi,
    I am creating test script using SECATT t.cde. I select traget system and click on Pattern Button and provide input as follow.
    Group : UI Control
    Command : TCD (Record)
    Transaction : MM02
    When I click continue button, I am getting error "Transaction MM02 could not be found in Target System".
    I had check my RFC Configuration, its working properly.
    Please help me to solve this issue.
    Regards,
    Nisit

    Not sure what exactly you're asking, but here is a "how-to" article on eCATT creation:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50bec015-14f1-2910-6080-9874b3499052

  • Error in Group Asset Creation

    When Iam trying to create Group Asset, it's giving below mentioned warning message. Is that only one depreciation area will be assigned in one complete client?
    I tried to fix through this navigation but couldn't able to fix it ? Please let me know.
    Company code 1000: Group asset 3005 manages dep. area 20
    Message no. AC715
    Diagnosis
    Company code 1000: Group asset 3005 still manages depreciation area 20. For this reason, you cannot delete the group asset indicator.
    System Response
    The data is not saved.
    Procedure
    There are two options:
    1. Set the indicator for managing group assets.
    2. Deactivate depreciation area 20 in group asset 3005 and in all others that manage this depreciation area ( Change group asset: master data). Then you can delete the indicator for managing group assets in depreciation area 20.
    Thanks

    Hi,
    Kindly check whether the message is triggered during the creation of group asset ( in Tcode: AS21) , further it is an information message not a warning message , i think during configuration of depreciation ares as group asset in Tcode: OAYM while removing the check box  for depreciatiuon area 20 and saving the configuartion the information occurs . since the a group asset has been cretaed using the dep area 20 hence it is necessary to deactivated the dep area in the group asset mentioned and then remove the group asset indicator.

  • Transaction for Masive Asset Creation

    Hi there !, Is there any way to create multiple assets at the same time from an excel file or a txt file ?  So no need to create asset by asset using AS01 ?
    thanks !

    Hi,
    SCAT is another tool where you can upload the master data. It uses the transaction recording procedure to upload data, somewhat similar to LSMW. But SCAT is even more simplified way.
    You can record a SCAT with "AS91 - Legacy Master Upload" with amounts or you can record with "AS01 - New Master Creation" depending on your requirement.
    Further for BDC you need the help of an ABAPer. But SCAT is meant for functional consultants only. You simply have to use te correct fields. Finding fields is also not difficult because SCAT provides them to you directly.
    Regards,
    Swapnil

  • Ecatt: how to test the creation of a purchase requisistion (ME51N)

    Hello ecatt-experts,
    I have some questions concerning the creation of a purchase requisition with ecatt:
    - is it possible to use TCD recording instead of sapgui recording for ME51N ?
    (as far as I've seen it's not possible with TCD as I didn't get back the field-values)
    - Is it possible to record the creation of a PR with 1 item and to write a script which can be used for the creation of a PR with n items ?
    For this I would need to cread GUIElement- Parameters dynamically.
    Or is the only solution to this problem to register a sapgui with n items and to define n parameters ?
    regards,
    monika

    HI Monika,
    It is difficult to use TCD for creating a Purchase Requisition (I am not telling you that it is impossible, you can do it, but its really hard to manipulate screen elements and to pass values to them).
    One thumb rule is to use SAPGUI for all Enjoy transactions(ME21N, ME51N, MIGO....)
    Answer to your second question is YES. You can use the single recording for N number of items without creating multiple parameters.
    You have to create a parameter with the parameter reference as the table/structure mentioned in the transaction grid(Press F1 on the TA screen and then go to technical help and copy the table/structure name and paste it in the parameter reference area of the eCATT parameter ending with [] like <b><I_MARA>  <Description> <MARA[]></b> ).
    Then create another local parameter of type numeric(may be V_COUNT )
    In the eCATT, use a GETLENGTH (I_MARA, V_COUNT).
    Then loop the grid values like
    DO (V_COUNT).
    SAPGUI RECORDING <b>ONLY</b> FOR THE ITEMS..
    Here map the values with the values of the St. Parameter
    like I_MARA[&LPC]-MATNR.
    ENDDO.
    This way, you can pass multiple values to the grid to the parameter I_MARA in the runtime and also use a single line recording for passing multiple values.
    This thread might help you in a way.
    Re: Secatt doubt
    Hope the solution helps.
    Best regards,
    Harsha
    PS: Reward points accordingly for all responding.

Maybe you are looking for