Test call of TP ended with return  0212

while releasing a transport request, getting the following error message-
test call of TP ended with return  0212
your transport request cannot be exported , since all the requirements are not fulfilled
calling transport control (tp) program "TP EXE CHK DEVK908291  pf=usr/sap/trans/bin/tp_domain_PRD.pfl -Dtransdir=usr/sap/tr"
which checks the export requirement , returned the following information
returned code from tp :0212
further processing is terminated
Please help if anyone has any clue
Regards
Al Mamun

Hi Eric,
Thanks for your reply,
I have checked the configuration, looks ok. The path is ok, I missed the / before usr while typing this message.
one thing I checked that there is no cofile or datafile corresponding to that transport. Same thing is happening while releasing  other transports.
Is it mount problem?
Al Mamun

Similar Messages

  • Test call of transport control program (tp) ended with return code 0200 Message no. TK094

    Hello Expert,
    My SAP System environment as follow
    SAP Product : SAP NetWeaver 04
    Operating System : Windows 2003 32 bit
    SAP Database : MS SQL 2005 32 bit
    I have installed SAP NetWeaver 04 system with system copy option. I have installed Application server & Database server on different physical server. App server : SSC2PAS3SFWBW and Database Server : SSC2PAS3SFSQW1.
    After SAP NetWeaver 04 installation with system copy I have done TMS configuration with virtual system for a test, It is working fine but while releasing request form SFD system (Development system) it get error  “Test call of transport control program (tp) ended with return code 0200. Message no. TK094”
    I have reconfigured the TMS and check but it can’t help. TR gets release and import with OS level but at SAP level it gets error.
    Trans --> Log
    1 ETP199 ######################################
    1 ETP199X######################################
    1 ETP182 CHECK WRITEABILITY OF BUFFERS
    1 ETP101 transport order     : "SFDK905838"
    1 ETP102 system              : "SFD"
    1 ETP108 tp path             : "tp"
    1 ETP109 version and release : "340.16.72" "640"
    1 ETP198
    2EETP128 No target system defined. "SFDK905838" is not a transport request.
    1 ETP182 CHECK WRITEABILITY OF BUFFERS
    1 ETP110 end date and time   : "20140602150208"
    1 ETP111 exit code           : "12"
    1 ETP199 ######################################
    Steps for Reconstruction                                            
    # Upgraded latest SAP Kernel Non-Unicode 640_Rel Patch level 404
    # Reconfigured the TMS
    # Full User Permission has been set to all SAP Directory.        
    Rgds,
    Ashok      

    Hi Ashish,
    I have removed virtual system form TMS and configured with Development & Production system, but the same error. Not able to release TR.
    SLOG as below.
    ERROR SFDK905832           SFD f 0012 20140602090930 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602093923 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602094059 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602102854 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602103633 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602104142 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602111140 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602112723 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113109 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113704 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113722 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113753 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113809 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905834           SFD f 0012 20140602125959 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905834           SFD f 0012 20140602130035 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    START EXPORT PREPARATION   SFD e      20140602132917              sfdadm       SSC2PAS3SFWBW 20140602132916001358
    START tp_getprots          SFD E      20140602132917              sfdadm       SSC2PAS3SFWBW 20140602132916001358
    STOP  tp_getprots          SFD E      20140602132920              sfdadm       SSC2PAS3SFWBW 20140602132916001358
    STOP  EXPORT PREPARATION   SFD e      20140602132920              sfdadm       SSC2PAS3SFWBW 20140602132916001358
    ERROR SFDK905836           SFD f 0012 20140602133526 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905836           SFD f 0012 20140602133540 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602144313 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602144350 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602144430 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602150202 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602150208 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140603080634 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140603081006 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140603083952 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140603084005 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603091608 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603091617 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905842           SFD f 0012 20140603091826 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603093805 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603101944 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603102709 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603114753 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603121948 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603122039 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603123438 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603135937 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603140114 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603140233 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603140339 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603141743 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603150924 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603152403 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603152753 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603153518 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603162013 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603162544 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603162639 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603162755 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603163347 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603163740 default_user A559420      SSC2PAS3SFWBW                    
    Rgds,
    Ashok

  • Error:        Test call of transport control program (tp) ended with return

    Hi Experts,
    When we are trying to transport Request.
    Error:        Test call of transport control program (tp) ended with return code 0208
    in STMS what are the steps to fallow to just back up the code.
    Any Solutions is Greatly Appreciable...
    Thanks in Advance,
    Ram,

    RAM,
    check these links
    http://www.sapfans.com/forums/viewtopic.php?f=12&t=326264
    Re: tp ended with error code 0208
    Please post the question in relevant forums
    Thanks
    Bala Duvvuri

  • Error: Test call of transport control program (tp) ended with return code 0

    Hi Experts,
    When we are trying to transport Request.
    Error: Test call of transport control program (tp) ended with return code 0208
    in STMS what are the steps to fallow to just back up the code.
    Any Solutions is Greatly Appreciable...
    Thanks in Advance,
    Ram,

    Hi,
    a)If your system is UNIX check /usr/sap/trans is mounted or not?
    b)After configuring TMS did you save and activate?that can be one reason.
    c)tp might be corrupted.u need to upgrade your tp. (or you can upgrade to the latest kernel)
    Please check the below link
    could not start transport control program tp
    However as suggested by NIbu, you should restart the server once before doing any other checks
    Thanks
    Debdeep
    Edited by: Debdeep  Ray on Jul 13, 2009 4:28 PM

  • Test call of transport control program (tp) ended with return code 0249

    Hi,
    When i release a TR i get the following error
    Pls let me know of what can be the reason for the same
    I did a kernel upgrade 2 days back
    Test call of transport control program (tp) ended with return code 0249
    Message no. TK094
    Diagnosis
    Your transport request could not be exported, since all requirements were not fulfilled.
    Calling the transport control program tp
       "tp EXPCHK BWDK900308 pf=
    WDBSSAPBWD01\sapmnt\trans\bin\TP_DOMAIN_BWD.PFL -Dtransdi"
    which checks the export requirements, returned the following information:
    Return code from tp: 0249
    Error text from tp: ERROR: No connect due to DbSl Load Lib Failure
    System Response
    Further processing is terminated.
    Procedure
    Check the following points:
    u2022     Feasibility of the transport control program tp
    u2022     Parameter settings in the transport profile
    u2022     Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
    u2022     Write authorization for the subdirectories
    u2022     Write authorization for the files of the subdirectories cofiles, data, log, sapnames
    Release the request again when the error has been removed

    Hi Balaji,
    End of your question contains the areas to be varified.
    Your SAP seems to be installed in windows environment
    Check transport profile paramater and file permissions.
    Try to browse the directory
    WDBSSAPBWD01\sapmnt\trans\bin\ from start->run
    Check with tp connecting to DB  with tp connect <SID>
    chceck file permission to datafile and cofiles (in case of OS UNIX)
    Regards,
    Ganesh

  • Tp ended with return code 0212

    Hi Experts,
    when Iu2019m trying to release a transport request in Development Iu2019m getting the following return code
    Test call of transport control program (tp) ended with return code 0212.
    please let me know how to proceed with this return code...
    SAP 4.6C
    Windows 2003
    Datebase 10.0.2.2
    Regards
    Prakash

    When i go for tp system log, i'm getting the TMS Alert Viewer:Warning
    command - TMS_MGR_READ_TP_SYSLOG
    service - Transport service
    Function - TMS_TP_READ_LOGFILE
    Message - OPEN_FAILED
    Regards
    Prakash

  • -Support package-Test import---Ended with return code:  === 8 ===(Urgent)

    Dear all, using -
    >   SAP ECC 6.0 with IS - AFS 6.0
    Environment  -- Win2k3 with Orc 10.2
    Kernel              700 - 75
    Spam/Saint -     70026
    R3trans -d         <0000>
    STMS is very consistent.
    Met all the pre-requisites when applying Support packs &  going succesfull
    but
    While applying   
    Sapk-60004inafs CRT with sapkh 60009,10,11 in
    Test_import phase it is showing the following error for
    sapkh 60010.
    Test import
    Transport request   : SAPKH60010
    System              : MBD
    tp path             : tp
    Version and release: 370.00.09 700
    R3TRPROGJ_1IRUTZN was repaired in this system
    R3TRPROGJ_1IRUTZN was repaired in this system
    Test import
    End date and time : 20080410100230
    Ended with return code:  ===> 8 <===
    When im runing with 700-75 is it possoble to import latest TP
    <SAR tp_145-20001354.sar TP  145 Info 3317 30.01.2008 >
    in to existing kernel. plaese coment on this as i think it's a TP error.
    please also advice me in different areas.
    Cheers,
    Rahul

    HI thanx a lot ,
    It the same procedure i did & checked your message indicating the same steps .
    Yes ,standard object is repaired in  system & im not aware of that
    & even it is not shown that it is recorded to work bench change request when i started applying the support pack.
    I did the same went to SE03 selected the object .
    Selected lock overview
    Identified the change request & released it.
    I got one more doubt what happens when i set the object to repair flag.
    Cheers ,
    Rahul

  • Ended with return code: === 8 === while doing transports from Dev to Test

    Hi Experts,
    We are doing transports from BD1 to BQ1 and getting this error message.
    Could anyone please let me know why and what would be the solution for the following error message:
    Execution of programs after import (XPRA)
    Transport request   : BD1K900065
    System              : BQ1
    tp path             : tp
    Version and release: 370.00.09 700
    Execution of programs after import (XPRA)
    End date and time : 20070803133308
    Ended with return code:  ===> 8 <===
    Thanks in advance.
    Best Regards,
    Chandu.

    Raymonds,
    There is huge list of errors coming up. Some of them are as below:
    Navigation attribute 0SALESORG is missing in characteristic 0PLANT
    Navigation attribute 0SALES_DIST is missing in characteristic 0PLANT
    Characteristic 0RT_LOCATIO: Referenced characteristic 0PLANT not (actively) available
    Attribute 0INT_CUST from characteristic 0SALESORG not (actively) available
    Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
    Attribute 0CRM_MKTELM from characteristic 0UCCONTRACT not (actively) available
    Hierarchy characteristic 0BPARTNER of characteristic 0UCCONTRACT is not active
    Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
    Characteristic 0UCOUTLCONT: Referenced characteristic 0UCCONTRACT not (actively) available
    Thanks in advance.
    Best Regards,
    Chandu.

  • Transport control program (tp) ended with return code 0200

    Hi Gurus,
    Please help, we have a fresh system copy of our prod. I already configure new domain controller with one virtual system. it was meant for 2 system lanscape. PRD -> VIR. The problem now is everytime we try to release a config it shows an error
    "Test call of transport control program (tp) ended with return code 0200"
    System error shows that calling   "C:\>tp EXPCHK BWPK900060 pf=
    SCWOSAPBW3\sapmnt\trans\bin\TP_DOMAIN_BWP.PFL -Dtransdir=
    SCWOSAPBW3\sapmnt\trans" Error text from tp: ERROR: Buffer check failed.
    But doing it in OS level it has no issues
    C:\>tp EXPCHK BWPK900060 pf=\\SCWOSAPBW3\sapmnt\trans\bin\TP_DOMAIN_BWP.PFL -Dtr
    ansdir=\\SCWOSAPBW3\sapmnt\trans
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.63 (release 640)
    createinfo succeeded
    Buffer check succeeded
    tp finished with return code: 0
    meaning:
      Everything OK
    STMS are all ok connection test, transport directory test and transport tool test.
    Kindly help me to resolve issue.
    OS platform is windows 2003, Netweaver 04 640, MSSQL2005.
    Thank you in advance.
    Joel

    Hi Anil,
    Here is the result after the tp check all command.
    D:\usr\sap\trans>tp check all pf=d:\usr\sap\trans\bin\TP_DOMAIN_SID.PFL
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.63 (release 640)
    check>Log file is written to \\hostname\sapmnt\trans\tmp\CHECK.LOG
    check>
    check>Collected 3 filenames from [\\hostname\sapmnt\trans\buffer\.]
    check>Collected 2 Systemnames from [\\hostname\sapmnt\trans\buffer\.]
    check>Collected 00001 out of 00001 entries from buffer BWP.
    check>Collected 00001 entries from buffers
    check>
    check>Collected 1 filenames from [\\hostname\sapmnt\trans\cofiles\.]
    check>Found 0 invalid filenames on Cofile-directory
    check>
    check>
    check>Collected 1 filenames from [\\hostname\sapmnt\trans\data\.]
    check>Found 0 invalid filenames on Datafile-directory
    check>
    check>Collected 14 filenames from [\\hostname\sapmnt\trans\log\.]
    check>Found 2 invalid filenames on Logfile-directory
    check>
    check>Collected 3 filenames from [\\hostname\sapmnt\trans\sapnames\.]
    check>
    check>WARNING: BWPK900060 has status T_STEP_UNKNOWN in  sapnames/TEST
    check>WARNING: BWPK900058 has status T_STEP_UNKNOWN in  sapnames/TEST
    check>WARNING: BWPK900056 has status T_STEP_UNKNOWN in  sapnames/TEST
    check>WARNING: SAPKD64038 has status T_STEP_UNKNOWN in  sapnames/SAPUSER
    check>WARNING: BWPK900060 has status T_STEP_UNKNOWN in  sapnames/SUPPORT
    check>Elapsed time 0m 1s
    tp finished with return code: 0
    meaning:
      Everything OK
    Kindly advise on what to do next.
    Thank you.
    joel
    Edited by: Joel Cancio on May 31, 2010 11:47 AM

  • How to call a dialog program with return value in another dialog program

    Dear All,
    How can I call a dialog program with return value from another dialog program?
    Regards,
    Alok.

    Hi Alok,
    You can you SET/GET parameters to do this.
    This is some information about this.
    To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
    ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETERstatements.
    To fill one, use:
    SET PARAMETER ID pid FIELD f.
    This statement saves the contents of field f under the ID pid in the SAP memory. The ID pid can be up to 20 characters long. If there was already a value stored under pid, this statement overwrites it. If you double-click pid in the ABAP Editor, parameters that do not exist can be created as a Repository object.
    To read an SPA/GPA parameter, use:
    GET PARAMETER ID pid FIELD f.
    This statement places the value stored under the pid ID into the variable f. If the system does not find any value for pid in the SAP memory, sy-subrc is set to 4. Otherwise, it sets the value to 0.
    Thanks,
    SriRatna

  • Error in transport, ended with return code:  12,  job RDDEXECL cancelled

    Hi Friends,
    When I am trying to import a request in a BW preproduction system, it is giving below error: However, the transport is imoprted successfully in Quality.
    ===================================
    Program terminated (job: RDDEXECL, no.: 09222300)
       See job log
    Execution of programs after import (XPRA)
    End date and time : 20080509092238
    Ended with return code:  ===> 12 <===
    Job log:
    Date        Time      Message
    09.05.2008  09:22:23  Job started
    09.05.2008  09:22:23  Step 001 started (program RDDEXECL, variant , user ID DDIC)
    09.05.2008  09:22:23  All DB buffers of application server unix0001 were synchronized
    09.05.2008  09:22:25  ABAP/4 processor: UNCAUGHT_EXCEPTION
    09.05.2008  09:22:25  Job cancelled
    =======================================
    Kindly advice.
    Thanks & regards,
    Kunal Patel.

    Hello,
    I ran a search for this error and found the following notes:
    SAP Note 966234 - 70SP10: DTP transport and content error
    SAP Note - 1074388 SAPBINews NetWeaver 7.0 BI Support Package 16
    Check if they are relevant for your system.
    Regards,
    Siddhesh

  • Transport Request Ended with return code:  === 12 ===

    Hi
    Good day to you.
    We are able to move Transport Request from Development BW Client (with respect to an SEM-BCS Configuration) to Quality BW Client smoothly.
    But when we move the same TR to Production client, we are getting the following error message. I would be very grateful if somebody could throw light on why it is happening, what could be its implications and what to do to avoid the same
      Execution of programs after import (XPRA)
      Transport request   : DBWK901288
      System              : PBW
      tp path             : tp
      Version and release: 340.16.37 640
      Post-import methods for change/transport request: DBWK901288
         on the application server: sapbwpd
      Post-import method FINB_TR_AFTER_IMP_METHOD started for UCREPGROUP T, date and time: 20081029144344
      Post-processing taking place in client 300
      Import carried out using RFC destination PBWCLNT300
      Communication error: Destination PBWCLNT300 -> long text
      Errors occurred during post-handling FINB_TR_AFTER_IMP_METHOD for UCREPGROUP T
      FINB_TR_AFTER_IMP_METHOD belongs to package FINB_TRANSPORT_TOOL
      The errors affect the following components:
         FIN-FB (Financials Basis)
      Post-import method FINB_TR_AFTER_IMP_METHOD completed for UCREPGROUP T, date and time: 20081029144351
      Post-import methods of change/transport request DBWK901288 completed
           Start of subsequent processing ... 20081029144344
           End of subsequent processing... 20081029144351
      Execute reports for change/transport request: DBWK901288
         on the application server: sapbwpd
      There are no reports to execute
      Execution of programs after import (XPRA)
      End date and time : 20081029144351
      Ended with return code:  ===> 12 <===
    Regards
    Siddique

    Hi Siddique,
    Looks like your RFC destination is wrong. The proper syntax is FINBTR@<system>CLNT <client>.
    See also the note 644610.

  • Importing error Ended with return code:  === 8 ===

    Hi Experts,
    I am trying to transporting an infoobject 0EMPLOYEE from Dev to Production.While importing the request I am getting an error like
    Execution of programs after import (XPRA)
    Transport request   : BD1K901543
    System              : BP1
    tp path             : tp
    Version and release: 372.04.36 700
    Execution of programs after import (XPRA)
    End date and time : 20090206164251
    Ended with return code:  ===> 8 <===
    after expanding this error msg i am getting
    Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Activation Mode)
    Characteristic 0CM_CTAR: Unit 0UNIT_DIM no allowed in compounding
    Characteristic 0CM_SHAR: Unit 0AREA_UNIT no allowed in compounding
    by clicking on the error mag
    Diagnosis;
    If the characteristic is used in an InfoProvider with dimensions (for example, an InfoCube or MultiProvider), the compounded unit is not unique if currency key figures are used at the same time.
    System Response
    This type of modeling is not supported.
    Procedure
    Replace the currency with a different characteristic. If you nevertheless want to use a unit in the compounding, you should use the modeling of a characteristic that semantically represents a unit. To do so, copy the technical properties of the unit of measure or the currency.
    How can I solve this problem?
    Can add any other char to this compounding char is it works?if yes which currency char i need to add here?
    Thanks & Regards,
    Sridhar

    Hi Sridhar,
            I am facing the problem with 0CM_CTAR and 0CM_SHAR. both the characteristics are not allowed compouding ATTRIBUTES.
      0cm_ctar not allowed comp .attr of 0unit_dim
      0cm_shar not allowed comp.attr 0f area_unit.
    for this reason what i need to do. Please give me help on this.
    sridhar could you give me solution what i need to do. i am also implement  same sap note or any other solution you have.
    Please kindly give me reply.
    Thnaks,
    Guna.
    Edited by: gunasekhar raya on Apr 14, 2009 6:16 PM

  • Error in transport, job RDDEXECL cancelled, ended with return code: 12

    Hi all,
    When I am trying to import a request in a BW system from development to quality , it is giving below error:
    Program Terminated (job:RDDEXCEL no:11315700) messg no:TR012
    Please do needful
    Thanks and Regards,
    srinivas.m

    Hi Gurus,
    I have the same error "Error in transport, job RDDEXECL cancelled, ended with return code: 12" (Programa cancelado (job RDDEXECL, nº 09292900)).
    I have checked all the steps that are in the "Note 1101187 - The OLAP tunnel" and they are implemented.
    Find below the information about my BW system:
    SAP_ABA     700     0024     SAPKA70024     Componente multiaplicaciones
    SAP_BASIS     700     0024     SAPKB70024     Sistema Base SAP
    PI_BASIS     2005_1_700     0024     SAPKIPYJ7O     PI_BASIS 2005_1_700
    ST-PI     2008_1_700     0004     SAPKITLRD4     SAP Solution Tools Plug-In
    SAP_BW     700     0026     SAPKW70026     SAP NetWeaver BI 7.0
    BI_CONT     703     0016     SAPKIBIIQ6     Business Intelligence Content
    ST-A/PI     01N_700BCO     0000          -     Servicetools for other App./Netweaver 04
    I am trying to transport "Business Content (Statistics)", if this information can help you.
    What can i do to solve the problem? I am finding some clue and i dont find anything. It will be much appreciated any idea to solve the problem.
    Thanks in advance and kind Regards,
    Manuel
    Edited by: Manuel Guijarro on Oct 11, 2011 3:46 PM

  • Transport Ended with Return code error = 8? What we do now?

    Hi all,
    I was trying to transport the Update rules from Development system to Production system.
    But in the middle it got failed in Quality system & given the error as mentioned below.
    "Ended with Return code = 8".
    What we need to do now.
    Please Give ur valuable suggestions.
    Thanks in Advance.

    Hi,
    Pleas make sure that the target and the source for the update rules are present in the Quality sytem and are activated. if they are not present or are in inactive state then u need to transport them first and later on update rules.
    Sometimes what haapens is source and targets object for the update rules are present in the quality system and we make some changes in them in development and after making changes forget to transprt the changed request for source target and directly try to transport update rules which fails giveing an error. so jst make sure that the version in Development and the quality system for the both the source and targets objects are exactly same.
    i guess there would be one among the two cases mentioned above but still if its not the case then see wat error are u getting provide us the exact error so that we can be of more help to you.
    Assign points if applicable
    Thanks
    Puneet

Maybe you are looking for

  • How to enable versions feature in Details- Settingsof Km iview?

    Hi Can any body pls help me on Vesrion history display in KM iview. How to make use of the feature Details->setting->versions of KM iview.When we click on this option it says that "Each time an item is saved or uploaded to the repository, a new versi

  • How do I get my music in FCE?

    I'm sure this is really simple, and I've probably just missed a step but I have converted my songs to AIFF and I tried importing, I tried dragging and dropping... How do I get them in FCE?

  • Sound on iBook G4 is dead

    A few months ago I was on my iBook G4 and suddenly my sound died, also my microphone stopped working as well. I think it happened right after I upgraded iTunes. system.log reports May 17 19:00:07 ibook kernel[0]: Sound assertion "0 != err" failed in

  • Almost all of RAM is being used, internet and other tasks are slow

    My computer seems to be getting slower.  I don't do much more than run Safari.  When I run the activity monitor it shows that I have 3.99 GB of memory used out of 4 GB of physical memory. 

  • Je voudrais changer mon adresse de secour

    Comment je peux changer mon adresse de secour pour recommencer mes question de sécurité