Test call of transport control program (tp) ended with return code 0212

Hi All,
Your transport request could not be exported, since all requirements
were not fulfilled.
Calling the transport control program tp
   "tp EXPCHK DEVK905090
pf=
ord-sapdev\sapmnt\trans\bin\TP_DOMAIN_DEV.PFL -Dtransdir="
which checks the export requirements, returned the following
information:
This is the error i got.. Please let me know how to solve this issue..
Thanks & Regards,
Santhosh

Hi Santhosh,
you can check it out in STMS
wht you can do is:
Run Tcode STMS > Overview imports (F5) > you will find all import queues > then click on the import queue in which u want to see the status of transport (DEV , QAS , PRD )
then find out the transport no > click on that > then click on logs or press ( ctrl + f4)
If the Return Code is higher than 0012 then it says that a critical error has occurred, probably not caused by the contents of the request. You must inform your system administrator.
Hope this information will help you.
Regards,
SB.

Similar Messages

  • Test call of transport control program (tp) ended with return code 0200 Message no. TK094

    Hello Expert,
    My SAP System environment as follow
    SAP Product : SAP NetWeaver 04
    Operating System : Windows 2003 32 bit
    SAP Database : MS SQL 2005 32 bit
    I have installed SAP NetWeaver 04 system with system copy option. I have installed Application server & Database server on different physical server. App server : SSC2PAS3SFWBW and Database Server : SSC2PAS3SFSQW1.
    After SAP NetWeaver 04 installation with system copy I have done TMS configuration with virtual system for a test, It is working fine but while releasing request form SFD system (Development system) it get error  “Test call of transport control program (tp) ended with return code 0200. Message no. TK094”
    I have reconfigured the TMS and check but it can’t help. TR gets release and import with OS level but at SAP level it gets error.
    Trans --> Log
    1 ETP199 ######################################
    1 ETP199X######################################
    1 ETP182 CHECK WRITEABILITY OF BUFFERS
    1 ETP101 transport order     : "SFDK905838"
    1 ETP102 system              : "SFD"
    1 ETP108 tp path             : "tp"
    1 ETP109 version and release : "340.16.72" "640"
    1 ETP198
    2EETP128 No target system defined. "SFDK905838" is not a transport request.
    1 ETP182 CHECK WRITEABILITY OF BUFFERS
    1 ETP110 end date and time   : "20140602150208"
    1 ETP111 exit code           : "12"
    1 ETP199 ######################################
    Steps for Reconstruction                                            
    # Upgraded latest SAP Kernel Non-Unicode 640_Rel Patch level 404
    # Reconfigured the TMS
    # Full User Permission has been set to all SAP Directory.        
    Rgds,
    Ashok      

    Hi Ashish,
    I have removed virtual system form TMS and configured with Development & Production system, but the same error. Not able to release TR.
    SLOG as below.
    ERROR SFDK905832           SFD f 0012 20140602090930 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602093923 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602094059 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602102854 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602103633 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602104142 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602111140 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602112723 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113109 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113704 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113722 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113753 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905832           SFD f 0012 20140602113809 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905834           SFD f 0012 20140602125959 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905834           SFD f 0012 20140602130035 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    START EXPORT PREPARATION   SFD e      20140602132917              sfdadm       SSC2PAS3SFWBW 20140602132916001358
    START tp_getprots          SFD E      20140602132917              sfdadm       SSC2PAS3SFWBW 20140602132916001358
    STOP  tp_getprots          SFD E      20140602132920              sfdadm       SSC2PAS3SFWBW 20140602132916001358
    STOP  EXPORT PREPARATION   SFD e      20140602132920              sfdadm       SSC2PAS3SFWBW 20140602132916001358
    ERROR SFDK905836           SFD f 0012 20140602133526 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905836           SFD f 0012 20140602133540 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602144313 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602144350 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602144430 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602150202 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140602150208 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140603080634 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140603081006 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140603083952 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905838           SFD f 0012 20140603084005 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603091608 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603091617 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905842           SFD f 0012 20140603091826 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603093805 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603101944 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603102709 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603114753 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603121948 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603122039 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603123438 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603135937 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603140114 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603140233 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603140339 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603141743 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905840           SFD f 0012 20140603150924 default_user BASIS@ORIGIN SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603152403 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603152753 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603153518 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603162013 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603162544 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603162639 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603162755 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603163347 default_user A559420      SSC2PAS3SFWBW                    
    ERROR SFDK905844           SFD f 0012 20140603163740 default_user A559420      SSC2PAS3SFWBW                    
    Rgds,
    Ashok

  • Error: Test call of transport control program (tp) ended with return code 0

    Hi Experts,
    When we are trying to transport Request.
    Error: Test call of transport control program (tp) ended with return code 0208
    in STMS what are the steps to fallow to just back up the code.
    Any Solutions is Greatly Appreciable...
    Thanks in Advance,
    Ram,

    Hi,
    a)If your system is UNIX check /usr/sap/trans is mounted or not?
    b)After configuring TMS did you save and activate?that can be one reason.
    c)tp might be corrupted.u need to upgrade your tp. (or you can upgrade to the latest kernel)
    Please check the below link
    could not start transport control program tp
    However as suggested by NIbu, you should restart the server once before doing any other checks
    Thanks
    Debdeep
    Edited by: Debdeep  Ray on Jul 13, 2009 4:28 PM

  • Test call of transport control program (tp) ended with return code 0249

    Hi,
    When i release a TR i get the following error
    Pls let me know of what can be the reason for the same
    I did a kernel upgrade 2 days back
    Test call of transport control program (tp) ended with return code 0249
    Message no. TK094
    Diagnosis
    Your transport request could not be exported, since all requirements were not fulfilled.
    Calling the transport control program tp
       "tp EXPCHK BWDK900308 pf=
    WDBSSAPBWD01\sapmnt\trans\bin\TP_DOMAIN_BWD.PFL -Dtransdi"
    which checks the export requirements, returned the following information:
    Return code from tp: 0249
    Error text from tp: ERROR: No connect due to DbSl Load Lib Failure
    System Response
    Further processing is terminated.
    Procedure
    Check the following points:
    u2022     Feasibility of the transport control program tp
    u2022     Parameter settings in the transport profile
    u2022     Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
    u2022     Write authorization for the subdirectories
    u2022     Write authorization for the files of the subdirectories cofiles, data, log, sapnames
    Release the request again when the error has been removed

    Hi Balaji,
    End of your question contains the areas to be varified.
    Your SAP seems to be installed in windows environment
    Check transport profile paramater and file permissions.
    Try to browse the directory
    WDBSSAPBWD01\sapmnt\trans\bin\ from start->run
    Check with tp connecting to DB  with tp connect <SID>
    chceck file permission to datafile and cofiles (in case of OS UNIX)
    Regards,
    Ganesh

  • Test call of transport control program (tp) ended with return code 0232

    Hi Gurus,
    while releasing a request am facing this fallowing error :
    Calling the transport control program tp
       "tp EXPCHK SIDK901840 pf=
    HOSTNAME\sapmnt\trans\bin\TP_DOMAIN_SID.PFL -Dtransdir=\"
    which checks the export requirements, returned the following information:
    Return code from tp: 0232
    Error text from tp: ERROR: Connect to TI6 failed (20110131145153, prob..
    and i have checked the all requirements transport..all are fulfilled..
    Can any body tell me the solution.
    Regards,
    Kittu.

    Hi Juan,
    Thanks for your reply. I cant see tp import log because Request itself is not yet released and in tp system log it says that
    ERROR: Connect to SID failed (20110131102838, probably wrong environment).and the value of DIR_TRANS is
    HOSTNAME\sapmnt\trans.
    Please suggest me what to do to solve this issue.
    Regards,
    Kittu.

  • Test call of transport control program (tp) ended with return code 0208

    hi Gurus
    i am new to sap bi and trying to create transport an Infocube from development server to quality server.
    While releasing the transport request i am getting the above error and only sub request for development / Correction is available for release.
    For some reason Repair request is not being created by the system. Please can anyone help me with a possbile solution.
    Many thanks
    Saurabh

    Hi,
    I would suggest to get in touch with your Basis Administrators.
    tp ended with error code 0208
    Good Luck,
    Vikram

  • Test call of transport control program(tp) ended with return code 0208 (urg

    Hello to all ,
    When i am trying to transport a report program i am getting  this error .
    So please kindly help .
    it is urgent .
    thanks in advance.

    Make sure your TMS is set up correctly in transaction STMS.
    Peter

  • Test call of transport control program (tp) ended with return code 0012

    Hello,
    I have been trying to release directed a request with se09 transaction and TK094 error has appeared. Someone knows how solve this problem?
    Thanks

    Hi,
    You can test the tp tool with STMS. If everything is OK, then I would download the latest tp version and try the se09 again.
    Best Regards,
    JC Llanes.

  • Error:        Test call of transport control program (tp) ended with return

    Hi Experts,
    When we are trying to transport Request.
    Error:        Test call of transport control program (tp) ended with return code 0208
    in STMS what are the steps to fallow to just back up the code.
    Any Solutions is Greatly Appreciable...
    Thanks in Advance,
    Ram,

    RAM,
    check these links
    http://www.sapfans.com/forums/viewtopic.php?f=12&t=326264
    Re: tp ended with error code 0208
    Please post the question in relevant forums
    Thanks
    Bala Duvvuri

  • Transport control program (tp) ended with return code 0200

    Hi Gurus,
    Please help, we have a fresh system copy of our prod. I already configure new domain controller with one virtual system. it was meant for 2 system lanscape. PRD -> VIR. The problem now is everytime we try to release a config it shows an error
    "Test call of transport control program (tp) ended with return code 0200"
    System error shows that calling   "C:\>tp EXPCHK BWPK900060 pf=
    SCWOSAPBW3\sapmnt\trans\bin\TP_DOMAIN_BWP.PFL -Dtransdir=
    SCWOSAPBW3\sapmnt\trans" Error text from tp: ERROR: Buffer check failed.
    But doing it in OS level it has no issues
    C:\>tp EXPCHK BWPK900060 pf=\\SCWOSAPBW3\sapmnt\trans\bin\TP_DOMAIN_BWP.PFL -Dtr
    ansdir=\\SCWOSAPBW3\sapmnt\trans
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.63 (release 640)
    createinfo succeeded
    Buffer check succeeded
    tp finished with return code: 0
    meaning:
      Everything OK
    STMS are all ok connection test, transport directory test and transport tool test.
    Kindly help me to resolve issue.
    OS platform is windows 2003, Netweaver 04 640, MSSQL2005.
    Thank you in advance.
    Joel

    Hi Anil,
    Here is the result after the tp check all command.
    D:\usr\sap\trans>tp check all pf=d:\usr\sap\trans\bin\TP_DOMAIN_SID.PFL
    sapparam: sapargv( argc, argv) has not been called.
    sapparam(1c): No Profile used.
    sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
    This is tp version 340.16.63 (release 640)
    check>Log file is written to \\hostname\sapmnt\trans\tmp\CHECK.LOG
    check>
    check>Collected 3 filenames from [\\hostname\sapmnt\trans\buffer\.]
    check>Collected 2 Systemnames from [\\hostname\sapmnt\trans\buffer\.]
    check>Collected 00001 out of 00001 entries from buffer BWP.
    check>Collected 00001 entries from buffers
    check>
    check>Collected 1 filenames from [\\hostname\sapmnt\trans\cofiles\.]
    check>Found 0 invalid filenames on Cofile-directory
    check>
    check>
    check>Collected 1 filenames from [\\hostname\sapmnt\trans\data\.]
    check>Found 0 invalid filenames on Datafile-directory
    check>
    check>Collected 14 filenames from [\\hostname\sapmnt\trans\log\.]
    check>Found 2 invalid filenames on Logfile-directory
    check>
    check>Collected 3 filenames from [\\hostname\sapmnt\trans\sapnames\.]
    check>
    check>WARNING: BWPK900060 has status T_STEP_UNKNOWN in  sapnames/TEST
    check>WARNING: BWPK900058 has status T_STEP_UNKNOWN in  sapnames/TEST
    check>WARNING: BWPK900056 has status T_STEP_UNKNOWN in  sapnames/TEST
    check>WARNING: SAPKD64038 has status T_STEP_UNKNOWN in  sapnames/SAPUSER
    check>WARNING: BWPK900060 has status T_STEP_UNKNOWN in  sapnames/SUPPORT
    check>Elapsed time 0m 1s
    tp finished with return code: 0
    meaning:
      Everything OK
    Kindly advise on what to do next.
    Thank you.
    joel
    Edited by: Joel Cancio on May 31, 2010 11:47 AM

  • Transport control program tp ended with error code 0212

    Hi all,
    I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                           service: transport service
                                                                           start : online
                                                                           Function: TMS_TP_SHOW_BUFFER
                                                                           message: TP_REPORTED_ERROR
    In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
    Can you tell me how to resolve this issue?

    dev_tp contains:    
    This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
    unicode enabled version
    usage: R3trans.exe [<options>] <control_file>
    The control_file describes what R3trans has to do.
    The following options are possible:
    -c f1 f2 : Copy file f1 to f2 with character set conversion.
    -d       : DB connect. Test if SAP database is available.
    -i file  : Import from file without using a control file.
    -l file  : List the contents of file to the log file.
    -m file  : List the contents of file to allow tp to create a cofile.
    -t       : Test. All database changes are rolled back.
    -t4      : Trace level 4. Switch on developer trace.
    -u <int> : Unconditional modes. See below.
    -v       : Verbose. Write more details to the log file.
    -w file  : Log file. The default log file is 'trans.log'.
    -x       : DB connect without access on any SAP table.
    R3trans.exe finished (0012).
    & the slog file is not there in the trans/log directory

  • Transport control program tp ended with error code 0212 | URGENT

    Hi All,
             We are trying to import requests in our PRD system. As soon as we select the request and try to import it , we get the error "Transport control program tp ended with error code 0212".
    This is tp version 305.12.42 (release 46D) for ANY database            
    /usr/sap/trans/cofiles/K915883.<SID> for transport: <SID>K915883: Permissio
    HALT 20070222114323                                                    
    ERROR: /usr/sap/trans/cofiles/K915883.<SID> : cant open                  
    : Permission denied                                                    
    ERROR: EXIT(16) -> process ID is: 6878                                 
    tp returncode summary:                                                 
    TOOLS: Highest return code of single steps was: 16                     
    ERRORS: Highest tp internal error was: 0212                            
    Output from tools called by tp:                                        
    This is R3trans version 6.05 (release 46D - 18.10.01 - 11:30:00).      
    R3trans finished (0000).                                                                               
    When i checked the transport tool and rfc destinations, everything was successful.
    When i tried to do tp connect -
    23> tp connect <SID> pf=/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL
    This is tp version 305.12.42 (release 46D) for ANY database
    E-/usr/sap/tran/bin/TP_DOMAIN_<SID>.PFL could not be opened.
    EXIT
    tp returncode summary:
    TOOLS: Highest return code of single steps was: 0
    ERRORS: Highest tp internal error was: 0212
    tp finished with return code: 212
    meaning:
      could not access file as supposed (see SLOG for more details)
    We are having SAP 4.6C with DB -Oracle and OS HP-UX.
    Please let me know whow to rectifiy the issue. The situation here is getting worse.
    Regards,
    NK

    Hi Ruchit, Sorry for the delay. Here is the file you wanted -
    steic25q:root>ls
    DOMAIN.CFG          TPPARAM.bak         TP_DOMAIN_ID1.PFL   TP_DOMAIN_IQ1.PFL
    TMS_TEST.IS1        TPPRAMA0918         TP_DOMAIN_ID1.orig  nik.dev_evt
    TPPARAM             TP_DOMAIN_ID1.BAK   TP_DOMAIN_IP1.BAK
    steic25q:root>more TP_DOMAIN_ID1.PFL
    #TMS:0078:DOMAIN_ID1
    Caution !
    This file was generated by the Transport Management System.
    Do not change this file using a text editor.
    For more information, refer to the online documentation of the
    Transaction STMS.
    If this file was destroyed, it can be regenerated in the TMS.
    To do this, log on to the domain controller (system ID1) and call
    transaction STMS. In the System Overview, you can distribute the TMS
    configuration. This regenerates the file.
    STMS -> Overview -> Systems -> Extras -> Distribute TMS configugration
    TRANSDIR            = /usr/sap/trans
    DU1/CTC             = 1
    DU1/DUMMY           = 1
    DU1/NBUFFORM        = 1
    DU1/TP_VERSION      = 266
    DU2/CTC             = 1
    DU2/DUMMY           = 1
    DU2/NBUFFORM        = 1
    DU2/TP_VERSION      = 266
    ID1/CTC             = 0
    ID1/DBHOST          = steic24q
    ID1/DBLIBPATH       = /usr/sap/ID1/SYS/exe/run
    ID1/DBNAME          = ID1
    ID1/DBSWPATH        = /oracle/ID1/817_64
    ID1/DBTYPE          = ora
    ID1/NBUFFORM        = 1
    ID1/TP_VERSION      = 266
    IP1/CTC             = 0
    IP1/DBHOST          = steic25q
    IP1/DBLIBPATH       = /usr/sap/IP1/SYS/exe/run
    IP1/DBNAME          = IP1
    IP1/DBSWPATH        = /oracle/IP1/817_64
    IP1/DBTYPE          = ora
    IP1/NBUFFORM        = 1
    IP1/TP_VERSION      = 266
    IQ1/CTC             = 1
    IQ1/DBHOST          = cbnysap2
    IQ1/DBLIBPATH       = /usr/sap/IQ1/SYS/exe/run
    IQ1/DBNAME          = IQ1
    IQ1/DBSWPATH        = /oracle/IP1/817_64
    IQ1/DBTYPE          = ora
    IQ1/NBUFFORM        = 1
    IQ1/TP_VERSION      = 266
    TRN/CTC             = 1
    TRN/DUMMY           = 1
    TRN/NBUFFORM        = 1
    TRN/TP_VERSION      = 266
    steic25q:root>

  • Re: Transport control program tp ended with error code 0212

    Hi ,
              When transport request is added to import queue, getting following error :
    "Transport control program tp ended with error code 0212 "
    Please find the slog file description as follows:
       HALT 20110530001050
    ERROR: /usr/sap/trans/cofiles/K904416.<SID>: cant open
    : Permission denied
    ERROR: EXIT(16) -> process ID is: 2273
    HALT 20110530004629
    ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
    : Permission denied
    ERROR: EXIT(16) -> process ID is: 14341
    HALT 20110530004703
    ERROR: /usr/sap/trans/cofiles/K904416.<SID> : cant open
    : Permission denied
    ERROR: EXIT(16) -> process ID is: 14514
    How to correct this ?
    Thanks
    Srikanth

    Hi,
    It may happen happen due to permission issue when you are having SAN and sharing common trans directory now to check the permission of the file you have to login at os level and check the permission of the TR.
    cd /usr/sap/trans/cofiles/
    ls -l K904416<SID> - now here it will show the permission of the file please paste the output
    Thanks,
    Saleem

  • Transport control program tp ended with error code 0208

    Hello
    I installed minisap NW2004s on XP/SP2 VMWARE 4.5. The installation it self's works fine, but have some problems in the stms. when i call the transport queue there appears an error as follow:
    System   NSP              Command  TMS_MGR_READ_TRANSPORT_QUEUE 
    Client   000              Service  Transport Service            
    User     TMSADM           Start    Online                       
    Date     12.10.2006       Function TMS_TP_SHOW_BUFFER           
    Time     07:13:13         Message  TP_REPORTED_ERROR            
    Transport control program tp ended with error code 0208
    Errors: error in transportprofil (param missing
    unknown,.
    Any Idea? Thanks for your help.
    Regards, George

    Hi
    You can edit the parameter profile using RZ10 and RZ11. You should not copy but manually edit the parameters. Also you need to make a consistency check so that the parameters will be copied to the database from the OS level. You will find an option to perform consistency check in RZ11.
    Hope that helps.

  • Transport control program tp ended with error code 0247

    Hi,
    Our landscape is such that any transport request once released, gets imported to Q system immediately. However there is another system (another box REG - regression testing) to which I would like to import a request but the transport queue of REG system does not show the request. So I tried to explicitly add it to the queue but I get the following error message, 'Transport control program tp ended with error code 0247.
    There doesn't seem to be a problem with data & CO files as the same request is in Q system and the changes are all transported successfully.
    This request is a transport of copy that contains some ABAP code. (changes to the relevant package can be saved only in local requests therefore transport of copy is recommended to transport the changes).
    The changes appear correctly in Q system but for REG system the request neither appears in the queue nor be added to it.
    Can someone advise where the problem is.
    Cheers,
    KC

    Hi
    When the REG system is not in the system landscape, probably you may not have Data & Co files in that system & you need to have those files separately in the REG system path & then import it.
    Do consult Basis team on this issue.
    Thanks,
    Murali.

Maybe you are looking for