Test configuration error

Hi,
I am trying to test my scenario, in the test configuration and I am getting an error message as
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://<Hostname>:port/sap/xi/simulation?sap-client=001 User: PIDIRUSER
regards,
Kishore

Check thisl ink:
Re: HTTP Response 404, Forbidqden Error 403
Regards,
ravi

Similar Messages

REG:Test configuration error

Hi Guys,
I got error like"
Operation Mapping
OM_P1EUGR_ProductionDeclaration_LTPSS_To_P1EUSAP
Runtime error
Split mapping created no messages" in my Test Configuration in ID in my File to RFC scenario can anyone give me solution Please
Thanks

Hi,
Just check your input XML file ... hope you are not using the same xml as the one you get while testing the mapping, as it will have an extra tag <message> in it. you will have to remove this tag or Check for the occurrences of your target structure,It should be unbounded and follow the instrution given by Prateek.
Regards,
Kalpana.

Error while running test configuration

Hi,
I created a test script using SAPGUI and test configuration.In test configuration,i created 2 variants other than default one.Downloaded the variants and executed it. It was giving error "Error inn ecatt command SAPGUI","Cannot Find Screen Element in Replay Mode". When i run test script alone,its working fine.
Please tell me how to correct the problem.
Thanks,
Aparna.

Hello Aparna,
As per the error description give by you , it means that when you execute the script recorded the eCATT control is unable to find the screen element in the screen recorded , possible reasons may be that the control may be in some other screen and trying to find the screen element of the other screen in the present screen.
Solution to this may be check the connection id and the session id of the SAPGUI where the script is failing.
Ideally all the connection id and session id of all the SAPGUI's recorded has to be same so that execution takes place in a single session.
Hope it answers your question.
Thanks and Best regards,
Ajay

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

Reg:Error in Test Configure

Hi Guys,
My sce is File to Rfc while testing in Test Configure in ID it giving error as Interface Determination and Operation Mapping not found but when i was trigger from RWB it Processed sucess,can anyone give me solution for this Error
Thanks

Dear Jayan,
Check the following things.
IR
1. Sender File (Check whether the data type, message type, message interface created properly)
2. Receiver RFC (Check the RFC imported correctly)
3. Check Message Mapping and Interface Mapping have done properly. You can test the mapping under Test tab.
Finally check all the IR objects are activated or not.
ID
1. Receiver should be business system, which is configured in SLD
2. In interface determination check the sender interface, receiver interface and interface mapping are configured correctly. (According to your statement here will be the problem, so check this thoroughly)
3. Also check all the other objects Sender Agreement, Receiver determination and Receiver Agreement configured correctly.
Finally check all the ID objects are activated or not.
Regards,
JP.

Error in test configuration -URJENT

Hello every one,
                here i am facing a serious issue from last 5 days. which i am not able to find it where the problem is?.
               the issue is here our scenario is file to R/3. actually on the sender side we created one structure. and on the receiver we have to send this complex data into multiple interfaces. we are going to use proxies to send that data to R/3. I mean MULTI MAPPING
here is the blog that i taken as a reference and followed.
<u>/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible</u>
in ID whenever i am trying to test my configuration it is giving error in INTERFACE DETERMINATION/MAPPING step. here on sender side i am giving the payload directly
we didn't created any communication channel. so we need not create sender agreement.
              i created a mapping program and interface mapping in IR and i tested them also . they are working fine there. but when i am trying to test my scenario in test configuration with the same payload it is giving error in the interface determination and mapping step as intimated above.
              as receiver agreement is unique for an interface i created 3 receiver agreements as we are using three interfaces in receiver side. on the receiver side we are going to use proxies . so we used XI adapter . i am having the doubt that using XI adapter is giving any problem .please let me know.
            please help me . it will be very helpful for me . helpful ideas will be definitely REWARDED.
thanks
Ramana.

Hi Ramana,
I was trying to do the same scenario but stuck up with this.
Could you pls let me know what are the fields contained by ID in target message2 ...
Please check this for your clarification
http://www.flickr.com/photos/11212307@N08/1135395357/
Thanks
dushanth
Message was edited by:
        dushanth ry

Integrated configuration (PI 7.1) throws error when do 'Test Configuration'

I am doing Proxy to Web Service (SOAP) sync scenario. We are using Integrated Configuration. After created integrated configuration and test this from (Tools --> Test Configuration) it throws the following error at the receiver agreement step.
Sender Agreement - Green
Receiver Determination - Green
Interface Determination - Green
Operation Mapping - Green
Receiver Agreement - Red.
Problem occurred in receiver agreement for sender -DR4400_D to receiver -ESRI,urn:AssetManagement.AddressManagementSearchCapabilitiesFromECC_Out: No standard agreement found for , DR4400_D, , ESRI, urn::AssetManagement, AddressManagementSearchCapabilitiesFromECC_Out

Test Configuration cannot be used to test Integrated Configuration Scenario.....refer my reply here:
Re: Integrated Configuration in PI7.1
Regards,
Abhishek.

Error during test configuration

Hi friends,
Hope u all r doing well.
I am getting the an error while doing Test configuration in ID.
I am getting the error in the step 'Interface determination & mapping' -> Interface mapping.
*Interface Mapping <Not found>*
*Runtime error*
*com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_MTO_MTI_MM_: RuntimeException in Message-Mapping transformatio~*
I have succesfully tested both the msg mapping and interface mapping in IR
Please help me out.
The following is the entire stack trace
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace> <Trace level="1" type="T">Interface Mapping http://debansu.com MIOA_MIIA_MI </Trace> <Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MTO_MTI_MM_ </Trace> <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:286) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) </Trace> <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MTO_MTI_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd </Trace> <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MTO_MTI_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:MTI_Output/Input. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:286) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java:312) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:401) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:142) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:92) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0_0.processFunction(MappingServiceObjectImpl0_0.java:131) at sun.reflect.GeneratedMethodAccessor389.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy189.processFunction(Unknown Source) at sun.reflect.GeneratedMethodAccessor887.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java:277) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:219) at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:260) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) </Trace> <Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>

hi Debansu Sarkar .
let do this:
copy the structure from IR to test configuration, also be sure you put all right parametes like, BS and MI.
in test configuration, the fist step you configure the sender agreement, there, put the BS an sender MI, after put the payload and run test.
see this blog
Test Your XI Configuration With The New Test Tool
thanks
Ps: Reward points if usefull

Error Accessing Test Configuration

Hi,
I am facing a similar issue. Test console gets opened for few services but for few of them the console is not opening.
Below is the error i am facing
Error Accessing Test Configuration
Validation of ProxyService ProxyService/PS_V1 : ProxyService ProxyService/PS_V1 does not exist failed
I could see the proxy servive clearly in the console. It happened for one of the service so i created another proxy based on the proxy which is not showing the test console and the new one got opened. But after some time one more proxies test console is not opening.
I see both admin server and managed server running.
And in ALSB debug.xml the test console flag is set to true.
Wht is the issue. Any sugestions on this?? appreciate your help

Hi,
I saw the metalink ID but there the error was different it is somtthing like
Validation failed for proxy service. Referenced component not found.
But i am getting an error
Validation of ProxyService MainFlow/ProxyService/PS_Dequeue_V2 : ProxyService MainFlow/ProxyService/PS_Dequeue_V does not exist failed
Initially when i got this error i just recreated the proxy and it worked fine. But now i am getting this error for almost all the proxy services. I am not able to understand what is the issue. Any suggestions on this?

Operation Mapping Error while testing Configuration in ID

Hi Experts,
We are configuring a B2B interface using RNIF adapter to XI adapter. The RNIF adapter is the Sender adapter , which send data using XML format. XI adapter is the Receiver adapter for ECC. Message Mapping and Operation Mapping tests in ESR are running without any errors. But while testing Configuration Test in ID, we are getting the following error:
Interface Determination
| PIPP21_V020201_Seller | eInvoice_seller_RNIF | | PIPP21_V020201_Buyer
Sender
Communication Party
Communication Component
PIPP21_V020201_Seller
Outbound Interface
eInvoice_seller_RNIF
Namespace
http://ongc.co.in/xi/RosettaNet/PIPP21_V020201
Receiver
Communication Party
Communication Component
PIPP21_V020201_Buyer
RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_SLB_XSD2AProxy_ Thrown: com.sap.aii.utilxi.misc.api.BaseRuntimeException: The processing instruction target matching "[xX][mM][lL]" is not allowed. at com.sap.aii.mappingtool.tf7.Transformer.checkParserException(Transformer.java:172) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:141)
please do needful
Thanks
Laxman

Hi,
this means that you didn't copy the message correctly to the test tab in ID
try doing it once more - if it worked in ESR it has to work in ID in the same operation mapping
so it has to be a copy&paste error
Regards,
Michal Krawczyk

Does 3rd party Simulation test run generates schema or configuration errors

Hi all,
Does 3rd party pay simulation (USA) run generates any kind of schema or configuration error messages.
In my case when I did the test (no update) run no errors were generated but when we did the same thing thru update log (evaluation run) we identified errors.
From my understanding I was assuming that test run will also verify the configuration and generates any errors found.
Could some one clear my doubt?
Appreciate your input in advance.
Thank you.

Hi,
we are implementing new tax type 85 and we have existing tax type 01 and 10. IN ZPTX rule we have
         D   VWTCL 72
1        Z   GCY ZTAU
2        Z   GCY ZTAU
do i have to write a new rule ZTAU for 85 or can i just update in the existing ZTAU my new tax type 85 :
85                D UWTIFA
Do we have to define new rule ZTAU (3   Z GCY ZTAU)
for each new tax type or can we just proceed withthe changes to the existing rule.
Appreciate any kind of helpfull information.
Thank you.

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Sql Exception on Testing Configuration with SQL Server JDBC driver for XA

I have a requirement of analyzing the behavior of SQL Server JDBC data sources for XA transactions in our application.We have been using Non-XA drivers for both Oracle and SQL Server as we had no requirement for transactions spanning across multiple databases in past.I have setup and tested the XA driver for Oracle (Oracle Driver (Thin XA) for Instance Connections 9.0.1,9.2.0,10,11) in Weblogic 11g and its working perfectly for transactions spanning across two databases.No when I am trying to configure weblogic 11g R1 for Sql server JDBC driver to support XA transactions with driver details as follows,
Server:Weblogic 11g R1
Driver Type: MS Sql Server
Database Driver :Oracle's MS SQL Server Driver(Type 4 XA) Version:7.0,2000,2005)
Database:SQL Server 2005(Single Instance)
and try to create a new data source and select "Test Configuration" and following error is thrown ,
<Mar 17, 2011 4:49:49 PM GMT+05:30> <Error> <Console> <BEA-240003> <Console encountered the following error java.sql.SQLException: [OWLS][SQLServer JDBC Driver][SQLServer]xa_open (0) returns -3
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createAppropriateSQLExceptionInstance(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions40.createSQLException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.createException(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseExceptions.getException(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRPCRequest.processReplyToken(Unknown Source)
at weblogic.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
at weblogic.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonTransitionToState(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.postImplExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.commonExecute(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseStatement.executeUpdateInternal(Unknown Source)
at weblogic.jdbc.sqlserverbase.BasePreparedStatement.executeUpdate(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.executeXaRpc(Unknown Source)
at weblogic.jdbcx.sqlserver.SQLServerImplXAResource.open(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection.init(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXAConnection40.init(Unknown Source)
at weblogic.jdbc.sqlserverbase.BaseClassCreatorForJDBC40.createXaConnection(Unknown Source)
at weblogic.jdbcx.sqlserverbase.BaseXADataSource.getXAConnection(Unknown Source)
at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:550)
at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:450)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:64)
at org.apache.beehive.netui.pageflow.interceptor.action.ActionInterceptor.wrapAction(ActionInterceptor.java:184)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.invoke(ActionInterceptors.java:50)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java:58)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:87)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.console.internal.ConsolePageFlowRequestProcessor.processActionPerform(ConsolePageFlowRequestProcessor.java:261)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:686)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.PageFlowStubImpl.processAction(PageFlowStubImpl.java:106)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.bea.console.utils.MBeanUtilsInitSingleFileServlet.service(MBeanUtilsInitSingleFileServlet.java:47)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
I followed the instruction in weblogic jdbc drivers guide to configure the JTA Transactions to support XA on SQL Server machine and weblogic server which included,
1.Copying sqljdbc.dll copied to SQL_Server_Root/bin directory from WL_HOME\server\lib.
2.Copied instjdbc.sql to sql server machine and executed the script with following output,
Changed database context to 'master'.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_open2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_close2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_start2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_end2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_prepare2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_commit2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_rollback2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_forget2', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover', because it does not exist or you do not have permission.
Msg 3701, Level 11, State 5, Server SQLDB, Procedure sp_dropextendedproc, Line 16
Cannot drop the procedure 'xp_jdbc_recover2', because it does not exist or you do not have permission.
creating JDBC XA procedures
instxa.sql completed successfully.
3.Verified that MSDTC service is running on both SQL Server and weblogic machines with XA Transaction enabled and DTC option enabled for both inbound and outbound connections.
4.Copied sqljdbc.jar (version 3.0 downloaded from msdn portal) to "C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver" directory and updated weblogic_classpth variable in commEnv.cmd file.
set WEBLOGIC_CLASSPATH=%JAVA_HOME%\lib\tools.jar;%BEA_HOME%\utils\config\10.3\config-launch.jar;%WL_HOME%\server\lib\weblogic_sp.jar;%WL_HOME%\server\lib\weblogic.jar;%FEATURES_DIR%\weblogic.server.modules_10.3.2.0.jar;%WL_HOME%\server\lib\webservices.jar;%ANT_HOME%/lib/ant-all.jar;%ANT_CONTRIB%/lib/ant-contrib.jar;C:\Oracle\Middleware\wlserver_10.3\server\ext\jdbc\sqlserver\server\ext\jdbc\sqlserver\sqljdbc.jar
Can some one please provide some input on whats causing this and any other steps needs to be followed to implement XA support using SQL Server JDBC driver.

You seem to have done everything correctly and diligently. I would ask that you open
an official support case.

[SOLVED] configure: error: cannot run C compiled programs

I'm trying to build lib32-libxkbcommon 0.5.0-1 from AUR with makepkg. I already tried installing pacman (setting the default makepkg.conf) and multilib-devel with no luck.
makepkg messages:
==> Making package: lib32-libxkbcommon 0.5.0-1 (Mon May 11 00:17:05 EEST 2015)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found libxkbcommon-0.5.0.tar.xz
==> Validating source files with sha256sums...
libxkbcommon-0.5.0.tar.xz ... Passed
==> Extracting sources...
-> Extracting libxkbcommon-0.5.0.tar.xz with bsdtar
bsdtar: Failed to set default locale
==> Starting prepare()...
==> Removing existing $pkgdir/ directory...
==> Starting build()...
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... yes
checking for style of include used by make... GNU
checking for gcc... gcc -m32
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
==> ERROR: A failure occurred in build().
Aborting...
makepkg.conf:
# /etc/makepkg.conf
# SOURCE ACQUISITION
#-- The download utilities that makepkg should use to acquire sources
# Format: 'protocol::agent'
DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u'
'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u'
'rsync::/usr/bin/rsync --no-motd -z %u %o'
'scp::/usr/bin/scp -C %u %o')
# Other common tools:
# /usr/bin/snarf
# /usr/bin/lftpget -c
# /usr/bin/wget
#-- The package required by makepkg to download VCS sources
# Format: 'protocol::package'
VCSCLIENTS=('bzr::bzr'
'git::git'
'hg::mercurial'
'svn::subversion')
# ARCHITECTURE, COMPILE FLAGS
CARCH="x86_64"
CHOST="x86_64-unknown-linux-gnu"
#-- Compiler and Linker Flags
# -march (or -mcpu) builds exclusively for an architecture
# -mtune optimizes for an architecture, but builds for whole processor family
CPPFLAGS="-D_FORTIFY_SOURCE=2"
CFLAGS="-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4"
CXXFLAGS="${CFLAGS}"
LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro"
#-- Make Flags: change this for DistCC/SMP systems
MAKEFLAGS="-j5"
#-- Debugging flags
DEBUG_CFLAGS="-g -fvar-tracking-assignments"
DEBUG_CXXFLAGS="-g -fvar-tracking-assignments"
# BUILD ENVIRONMENT
# Defaults: BUILDENV=(!distcc color !ccache check !sign)
# A negated environment option will do the opposite of the comments below.
#-- distcc: Use the Distributed C/C++/ObjC compiler
#-- color: Colorize output messages
#-- ccache: Use ccache to cache compilation
#-- check: Run the check() function if present in the PKGBUILD
#-- sign: Generate PGP signature file
BUILDENV=(!distcc color !ccache check !sign)
#-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
#-- specify a space-delimited list of hosts running in the DistCC cluster.
#DISTCC_HOSTS=""
#-- Specify a directory for package building.
#BUILDDIR=/tmp/makepkg
# GLOBAL PACKAGE OPTIONS
# These are default values for the options=() settings
# Default: OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
# A negated option will do the opposite of the comments below.
#-- strip: Strip symbols from binaries/libraries
#-- docs: Save doc directories specified by DOC_DIRS
#-- libtool: Leave libtool (.la) files in packages
#-- staticlibs: Leave static library (.a) files in packages
#-- emptydirs: Leave empty directories in packages
#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
#-- purge: Remove files specified by PURGE_TARGETS
#-- upx: Compress binary executable files using UPX
#-- debug: Add debugging flags as specified in DEBUG_* variables
OPTIONS=(strip docs !libtool !staticlibs emptydirs zipman purge !upx !debug)
#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
INTEGRITY_CHECK=(md5)
#-- Options to be used when stripping binaries. See `man strip' for details.
STRIP_BINARIES="--strip-all"
#-- Options to be used when stripping shared libraries. See `man strip' for details.
STRIP_SHARED="--strip-unneeded"
#-- Options to be used when stripping static libraries. See `man strip' for details.
STRIP_STATIC="--strip-debug"
#-- Manual (man and info) directories to compress (if zipman is specified)
MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
#-- Doc directories to remove (if !docs is specified)
DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
#-- Files to be removed from all packages (if purge is specified)
PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
# PACKAGE OUTPUT
# Default: put built package and cached source in build directory
#-- Destination: specify a fixed directory where all packages will be placed
#PKGDEST=/home/packages
#-- Source cache: specify a fixed directory where source files will be cached
#SRCDEST=/home/sources
#-- Source packages: specify a fixed directory where all src packages will be placed
#SRCPKGDEST=/home/srcpackages
#-- Log files: specify a fixed directory where all log files will be placed
#LOGDEST=/home/makepkglogs
#-- Packager: name/email of the person or organization building packages
#PACKAGER="John Doe <[email protected]>"
#-- Specify a key to use for package signing
#GPGKEY=""
# COMPRESSION DEFAULTS
COMPRESSGZ=(gzip -c -f -n)
COMPRESSBZ2=(bzip2 -c -f)
COMPRESSXZ=(xz -c -z -)
COMPRESSLRZ=(lrzip -q)
COMPRESSLZO=(lzop -q)
COMPRESSZ=(compress -c -f)
# EXTENSION DEFAULTS
# WARNING: Do NOT modify these variables unless you know what you are
# doing.
PKGEXT='.pkg.tar.xz'
SRCEXT='.src.tar.gz'
# vim: set ft=sh ts=2 sw=2 et:
config.log:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libxkbcommon configure 0.5.0, which was
generated by GNU Autoconf 2.69. Invocation command line was
$ ./configure --prefix=/usr --libdir=/usr/lib32 --disable-docs --disable-static
## Platform. ##
hostname = Arch
uname -m = x86_64
uname -r = 4.0.1-1-ARCH
uname -s = Linux
uname -v = #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = unknown
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /usr/local/sbin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /usr/lib/jvm/default/bin
PATH: /usr/bin/site_perl
PATH: /usr/bin/vendor_perl
PATH: /usr/bin/core_perl
## Core tests. ##
configure:2424: checking for a BSD-compatible install
configure:2492: result: /usr/bin/install -c
configure:2503: checking whether build environment is sane
configure:2558: result: yes
configure:2709: checking for a thread-safe mkdir -p
configure:2748: result: /usr/bin/mkdir -p
configure:2755: checking for gawk
configure:2771: found /usr/bin/gawk
configure:2782: result: gawk
configure:2793: checking whether make sets $(MAKE)
configure:2815: result: yes
configure:2844: checking whether make supports nested variables
configure:2861: result: yes
configure:2987: checking whether to enable maintainer-specific portions of Makefiles
configure:2996: result: yes
configure:3023: checking for style of include used by make
configure:3051: result: GNU
configure:3122: checking for gcc
configure:3149: result: gcc -m32
configure:3378: checking for C compiler version
configure:3387: gcc -m32 --version >&5
gcc (GCC) 5.1.0
Copyright (C) 2015 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3398: $? = 0
configure:3387: gcc -m32 -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/5.1.0/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: /build/gcc-multilib/src/gcc-5-20150505/configure --prefix=/usr --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info --with-bugurl=https://bugs.archlinux.org/ --enable-languages=c,c++,ada,fortran,go,lto,objc,obj-c++ --enable-shared --enable-threads=posix --enable-libmpx --with-system-zlib --with-isl --enable-__cxa_atexit --disable-libunwind-exceptions --enable-clocale=gnu --disable-libstdcxx-pch --disable-libssp --enable-gnu-unique-object --enable-linker-build-id --enable-lto --enable-plugin --enable-install-libiberty --with-linker-hash-style=gnu --enable-gnu-indirect-function --enable-multilib --disable-werror --enable-checking=release --with-default-libstdcxx-abi=c++98
Thread model: posix
gcc version 5.1.0 (GCC)
configure:3398: $? = 0
configure:3387: gcc -m32 -V >&5
gcc: error: unrecognized command line option '-V'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3387: gcc -m32 -qversion >&5
gcc: error: unrecognized command line option '-qversion'
gcc: fatal error: no input files
compilation terminated.
configure:3398: $? = 1
configure:3418: checking whether the C compiler works
configure:3440: gcc -m32 -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3444: $? = 0
configure:3492: result: yes
configure:3495: checking for C compiler default output file name
configure:3497: result: a.out
configure:3503: checking for suffix of executables
configure:3510: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
configure:3514: $? = 0
configure:3536: result:
configure:3558: checking whether we are cross compiling
configure:3566: gcc -m32 -o conftest -march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wl,-O1,--sort-common,--as-needed,-z,relro conftest.c >&5
In file included from /usr/include/stdio.h:27:0,
from conftest.c:11:
/usr/include/features.h:365:25: fatal error: sys/cdefs.h: No such file or directory
compilation terminated.
configure:3570: $? = 1
configure:3577: ./conftest
./configure: line 3579: ./conftest: No such file or directory
configure:3581: $? = 127
configure:3588: error: in `/mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0':
configure:3590: error: cannot run C compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details
## Cache variables. ##
ac_cv_env_CC_set=set
ac_cv_env_CC_value='gcc -m32'
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
ac_cv_env_CPPFLAGS_set=set
ac_cv_env_CPPFLAGS_value=-D_FORTIFY_SOURCE=2
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOT_set=
ac_cv_env_DOT_value=
ac_cv_env_DOXYGEN_set=
ac_cv_env_DOXYGEN_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value=-Wl,-O1,--sort-common,--as-needed,-z,relro
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_LIBDIR_set=
ac_cv_env_PKG_CONFIG_LIBDIR_value=
ac_cv_env_PKG_CONFIG_PATH_set=set
ac_cv_env_PKG_CONFIG_PATH_value=/usr/lib32/pkgconfig
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_XCB_XKB_CFLAGS_set=
ac_cv_env_XCB_XKB_CFLAGS_value=
ac_cv_env_XCB_XKB_LIBS_set=
ac_cv_env_XCB_XKB_LIBS_value=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_set=
ac_cv_env_XORG_MALLOC_DEBUG_ENV_value=
ac_cv_env_YACC_set=
ac_cv_env_YACC_value=
ac_cv_env_YFLAGS_set=
ac_cv_env_YFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/usr/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC='gcc -m32'
ac_cv_prog_make_make_set=yes
am_cv_make_support_nested_variables=yes
## Output variables. ##
ACLOCAL='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing aclocal-1.14'
ADMIN_MAN_DIR=''
ADMIN_MAN_SUFFIX=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='$${TAR-tar}'
AM_BACKSLASH='\'
AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
AM_DEFAULT_VERBOSITY='1'
AM_V='$(V)'
APP_MAN_DIR=''
APP_MAN_SUFFIX=''
AR=''
AUTOCONF='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoconf'
AUTOHEADER='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing autoheader'
AUTOMAKE='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing automake-1.14'
AWK='gawk'
BASE_CFLAGS=''
BUILD_LINUX_TESTS_FALSE=''
BUILD_LINUX_TESTS_TRUE=''
CC='gcc -m32'
CCDEPMODE=''
CFLAGS='-march=core2 -m64 -mfpmath=sse -O2 -fomit-frame-pointer -pipe -fstack-protector --param=ssp-buffer-size=4'
CHANGELOG_CMD=''
CPP=''
CPPFLAGS='-D_FORTIFY_SOURCE=2'
CWARNFLAGS=''
CYGPATH_W='echo'
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DOT=''
DOXYGEN=''
DRIVER_MAN_DIR=''
DRIVER_MAN_SUFFIX=''
DSYMUTIL=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ENABLE_DOCS_FALSE=''
ENABLE_DOCS_TRUE=''
ENABLE_X11_FALSE=''
ENABLE_X11_TRUE=''
EXEEXT=''
FGREP=''
FILE_MAN_DIR=''
FILE_MAN_SUFFIX=''
GREP=''
HAVE_DOT=''
HAVE_DOT_FALSE=''
HAVE_DOT_TRUE=''
HAVE_DOXYGEN_FALSE=''
HAVE_DOXYGEN_TRUE=''
HAVE_NO_UNDEFINED_FALSE=''
HAVE_NO_UNDEFINED_TRUE=''
INSTALL_CMD=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LD=''
LDFLAGS='-Wl,-O1,--sort-common,--as-needed,-z,relro'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIB_MAN_DIR=''
LIB_MAN_SUFFIX=''
LIPO=''
LN_S=''
LTLIBOBJS=''
MAINT=''
MAINTAINER_MODE_FALSE='#'
MAINTAINER_MODE_TRUE=''
MAKEINFO='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/missing makeinfo'
MANIFEST_TOOL=''
MAN_SUBSTS=''
MISC_MAN_DIR=''
MISC_MAN_SUFFIX=''
MKDIR_P='/usr/bin/mkdir -p'
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OTOOL64=''
OTOOL=''
PACKAGE='libxkbcommon'
PACKAGE_BUGREPORT='https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon'
PACKAGE_NAME='libxkbcommon'
PACKAGE_STRING='libxkbcommon 0.5.0'
PACKAGE_TARNAME='libxkbcommon'
PACKAGE_URL='http://xkbcommon.org'
PACKAGE_VERSION='0.5.0'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PKG_CONFIG_LIBDIR=''
PKG_CONFIG_PATH='/usr/lib32/pkgconfig'
RANLIB=''
RT_LIBS=''
SED=''
SET_MAKE=''
SHELL='/bin/sh'
STRICT_CFLAGS=''
STRIP=''
VERSION='0.5.0'
XCB_XKB_CFLAGS=''
XCB_XKB_LIBS=''
XKBCONFIGROOT=''
XLOCALEDIR=''
XORG_MALLOC_DEBUG_ENV=''
XORG_MAN_PAGE=''
YACC=''
YACC_INST=''
YFLAGS=''
ac_ct_AR=''
ac_ct_CC='gcc -m32'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__nodep='_no'
am__quote=''
am__tar='$${TAR-tar} chof - "$$tardir"'
am__untar='$${TAR-tar} xf -'
bindir='${exec_prefix}/bin'
build=''
build_alias=''
build_cpu=''
build_os=''
build_vendor=''
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host=''
host_alias=''
host_cpu=''
host_os=''
host_vendor=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /mnt/tmp/yaourt-tmp-tsester/aur-lib32-libxkbcommon/src/libxkbcommon-0.5.0/build-aux/install-sh'
libdir='/usr/lib32'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='$(MKDIR_P)'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "libxkbcommon"
#define PACKAGE_TARNAME "libxkbcommon"
#define PACKAGE_VERSION "0.5.0"
#define PACKAGE_STRING "libxkbcommon 0.5.0"
#define PACKAGE_BUGREPORT "[url]https://bugs.freedesktop.org/enter_bug.cgi?product=libxkbcommon[/url]"
#define PACKAGE_URL "[url]http://xkbcommon.org[/url]"
#define PACKAGE "libxkbcommon"
#define VERSION "0.5.0"
configure: exit 1
other info:
core/pacman 4.2.1-1
multilib/gcc-multilib 4.9.2-4 (multilib-devel) [installed]
The GNU Compiler Collection - C and C++ frontends for multilib
multilib/lib32-fakeroot 1.20.2-1 (multilib-devel) [installed]
Tool for simulating superuser privileges (32-bit)
multilib/lib32-libltdl 2.4.5-1 (multilib-devel) [installed]
A generic library support script (32-bit)
Last edited by tsester (2015-05-10 22:10:28)

tsester wrote:P.S.: I recently transfered the linux system between failing disks
In that case you should probably check that no other packages are missing files with
pacman -Qkk 2>&1 | grep "No such file or directory"
Any packages that report that they're missing files, you should reinstall.

Help needed for IPC configuration error

hi all,
I have installed IPC according to installation guide, RFC's are working perfectly. IPC_COM_SESSION_BEGIN gives a value. Still i get the following error while checking the ipc monitor n runnin the test.
Testing IPC standard installation. This test checks the IPC standard installation.Requires the default database. If Web Phone WP-940
is not in your database or not maintained
as expected, this test may fail.
Response tested successfully
Error while creating documentnull
Dispatcher gives
Using JAVA_HOME: C:\j2sdk1.4.2_03
Using CLASSPATH: ..\lib\IPCCustPatch.jar;..\lib\IPCPatch.jar;..\lib;..\lib\IPCEx
t.jar;..\lib\SAP_IPC.jar;..\lib\thirdParty.jar;..\lib\iaik_ssl.jar;..\lib\iaik_j
ce.jar
Using PATH: D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program
Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\W
bem;%java_home%\bin
Feb 17, 2007 1:42:58 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command GetPatchInfo in module SYSTEM
Feb 17, 2007 1:42:58 PM ....socket.server.dispatcher.RegisterMgr [main] Info: C
ontacting basis system
Feb 17, 2007 1:42:58 PM ....socket.server.dispatcher.RegisterMgr [main] Info: R
etrieved gateway settings from SAP Basis SystemCRMSERVER:sapgw09,CRMSERVER:sapgw
09
Feb 17, 2007 1:42:58 PM ....socket.server.dispatcher.RegisterMgr [main] Info: D
ispatcher settings:
        Try 1000 ms to ping an IPC server.
        Don't contact IPC servers the next 60000 ms after a ping.
        Use normal load balancing without any specialized servers.
        Specialized servers are generalized to replace dead ones.
        Load one leaves a server alone for 45000 msec.
        RFC support is enabled.
                (dispatcher:IPC_RFC_DISPATCHER, servers:IPC_RFC_SERVER_1
                 gateways:CRMSERVER:sapgw09,CRMSERVER:sapgw09) Don't send mail
about servers that are down.
Feb 17, 2007 1:42:58 PM      com.sap.sxe.socket.server.ServerBase [main] Info: I
PC Security-Level: 0
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.ServerBase [Main TCP/IP L
oop] Info: SAP IPC Dispatcher start
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO Version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO Middleware Version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Libjrfc version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: librfc version:
This RFC library belongs to the SAP R/3 Release *** 640,0,21 *** MT-SL
Versions of SAP internal libraries:
dptr:    2
ni :   37
cpic:    3
rfc :    3
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Path to JCO: jar:file:/D:/ipc/lib/thirdParty.jar!/com/sap/mw/jco/JCO.
class
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Error: Repository Error: Malformed Repository Entry: GetSupportedSAPClients
(no export SPC_ERROR_NUMBER)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Error: Repository Error: Malformed Repository Entry: Ping (no export SPC_ER
ROR_NUMBER)
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO_MW_MAX_STARTUP_DELAY = 3600. Assigned this value to jco.middlewar
e.max_startup_delay
Feb 17, 2007 1:42:59 PM ...server.rfc.RFCServer$JCOTraceListener [Main TCP/IP L
oop] Error: Please note: JCO Tracelevel 0 messages are mapped to error messages.
Typically they do not reflect IPC errors. JCO Error messages are typically no c
ause for concern
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:42:59 PM ... RFC Servers for program/destination [Main TCP/IP L
oop] Info: IPC_RFC_DISPATCHER via CRMSERVER:sapgw09
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Admin TCP/IP
Loop] Info: Started Admin Thread on port 9163
Feb 17, 2007 1:42:59 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: SAP IPC Dispatcher 4.0 SP07 started at Sat Feb 17 13:42:59 GMT+05:30
2007 on port 4444
Feb 17, 2007 1:43:05 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: request: <HEAD OP="Register" STATUS="STATUS" LEN="27" />host=192.168.0
.50&port=9999
Feb 17, 2007 1:43:05 PM ...ket.server.dispatcher.RegisterWrapper [WorkerThread-
1] Info: IPC Client Security-Level: 0
Feb 17, 2007 1:43:05 PM ...e.socket.server.dispatcher.ServerInfo [WorkerThread-
1] Info: 192.168.0.50:9999     Sat Feb 17 13:43:05 server registered
Feb 17, 2007 1:43:05 PM ...et.server.command.dispatcher.Register [WorkerThread-
1] Info: Server registered: 192.168.0.50:9999
Feb 17, 2007 1:43:05 PM ...xe.socket.server.CommandMgr.CRMSERVER [WorkerThread-
1] Info: command executed:Register, response code:200
Feb 17, 2007 1:43:05 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response: <HEAD OP="Register" ID="79920001" STATUS="200" LEN="77" />
rfcProgramId=IPC_RFC_SERVER_1&rfcGatewayHost=CRMSERVER&rfcGatewayPort=sapgw09
Feb 17, 2007 1:43:05 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response time of command Register: 172
Feb 17, 2007 1:43:59 PM ...ket.server.dispatcher.RegisterWrapper [Thread-2] Deb
ug: PING for 192.168.0.50:9999 (31 msec, load: 100/0)
Feb 17, 2007 1:43:59 PM ...ket.server.dispatcher.RegisterWrapper [Thread-2] Deb
ug:             Updated value is 5741 (31 ping, 100/0 load, never used)
Feb 17, 2007 1:43:59 PM         com.sap.sxe.socket.server.Storage [Cleaner] Debu
g: Session cleanup finished after 0 msec
Server gives
Using JAVA_HOME: C:\j2sdk1.4.2_03
Using CLASSPATH: ..\lib\IPCCustPatch.jar;..\lib\IPCPatch.jar;..\lib;..\lib\IPCEx
t.jar;..\lib\SAP_IPC.jar;..\lib\thirdParty.jar;..\lib\classes12.zip;..\lib\iaik_
ssl.jar;..\lib\iaik_jce.jar
Using PATH: D:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program
Files\Oracle\jre\1.1.8\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\W
bem;%java_home%\bin
Feb 17, 2007 1:43:03 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command GetPatchInfo in module SYSTEM
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command PMESetSessionLanguage in module PME
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command RemoveProduct in module IPC
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command CreateAdminSession in module IPC
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command Profiler in module IPC
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command DumpKnowledgeBaseBuffer in module IPC
Feb 17, 2007 1:43:04 PM     com.sap.sxe.log.log_api.SXE.ModuleMgr [main] Debug:
Couldn't determine location of command getXMLProperties in module IPC_ADMIN
Feb 17, 2007 1:43:04 PM             com.sap.tte.kernel4.TTEKernel [main] Info: S
tarting initialisation TTE Kernel
Feb 17, 2007 1:43:04 PM             com.sap.tte.kernel4.TTEKernel [main] Info: T
TE Kernel is not enabled
getLocalHost()=CRMSERVER/192.168.0.50
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.ServerBase [main] Info: I
PC Security-Level: 0
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.ServerBase [main] Info: T
his server will restart itself when database logon fails
Feb 17, 2007 1:43:05 PM            com.sap.sce.kbrt.imp.kb_loader [Thread-1] Deb
ug: Create KB_CRM_LOADER
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.ServerBase [Main TCP/IP L
oop] Info: SAP IPC Server start
Feb 17, 2007 1:43:05 PM          com.sap.sxe.socket.client.Client [Main TCP/IP L
oop] Info: IPC Client Security-Level: 0
Feb 17, 2007 1:43:05 PM          com.sap.sxe.socket.client.Client [Main TCP/IP L
oop] Debug: Client request: Register:host=192.168.0.50&port=9999
Feb 17, 2007 1:43:05 PM          com.sap.sxe.socket.client.Client [Main TCP/IP L
oop] Debug: Client response: Register:rfcProgramId=IPC_RFC_SERVER_1&rfcGatewayHo
st=CRMSERVER&rfcGatewayPort=sapgw09
Feb 17, 2007 1:43:05 PM          com.sap.sxe.socket.client.Client [Main TCP/IP L
oop] Debug: Client closed:
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Server registered at dispatcher CRMSERVER:4444
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO Version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO Middleware Version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Libjrfc version: 2.1.3 (2004-03-08)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: librfc version:
This RFC library belongs to the SAP R/3 Release *** 640,0,21 *** MT-SL
Versions of SAP internal libraries:
dptr:    2
ni :   37
cpic:    3
rfc :    3
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: Path to JCO: jar:file:/D:/ipc/lib/thirdParty.jar!/com/sap/mw/jco/JCO.
class
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Error: Repository Error: Malformed Repository Entry: GetSupportedSAPClients
(no export SPC_ERROR_NUMBER)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Error: Repository Error: Malformed Repository Entry: Ping (no export SPC_ER
ROR_NUMBER)
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: JCO_MW_MAX_STARTUP_DELAY = 3600. Assigned this value to jco.middlewar
e.max_startup_delay
Feb 17, 2007 1:43:05 PM ...server.rfc.RFCServer$JCOTraceListener [Main TCP/IP L
oop] Error: Please note: JCO Tracelevel 0 messages are mapped to error messages.
Typically they do not reflect IPC errors. JCO Error messages are typically no c
ause for concern
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM   com.sap.sxe.socket.server.rfc.RFCServer [Main TCP/IP L
oop] Debug: RFC Server is non-unicode server
Feb 17, 2007 1:43:05 PM ... RFC Servers for program/destination [Main TCP/IP L
oop] Info: IPC_RFC_SERVER_1 via CRMSERVER:sapgw09
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Main TCP/IP L
oop] Info: SAP IPC Server 4.0 SP07 started at Sat Feb 17 13:43:05 GMT+05:30 2007
on port 9999
Feb 17, 2007 1:43:05 PM      com.sap.sxe.socket.server.JavaServer [Admin TCP/IP
Loop] Info: Started Admin Thread on port 9164
Warning in ConversionEngine: There is no entry in the table EWUKEYS. EMU currenc
y conversion disabled.
Feb 17, 2007 1:43:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: request: <HEAD OP="GetLoad" />
Feb 17, 2007 1:43:59 PM ...xe.socket.server.CommandMgr.CRMSERVER [WorkerThread-
1] Info: command executed:GetLoad, response code:200
Feb 17, 2007 1:43:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response: <HEAD OP="GetLoad" ID="79980001" STATUS="200" LEN="24" />
socketLoad=100&rfcLoad=0
Feb 17, 2007 1:43:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response time of command GetLoad: 16
Feb 17, 2007 1:44:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: request: <HEAD OP="GetLoad" ID="79980001" />
Feb 17, 2007 1:44:59 PM ...xe.socket.server.CommandMgr.CRMSERVER [WorkerThread-
1] Info: command executed:GetLoad, response code:200
Feb 17, 2007 1:44:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response: <HEAD OP="GetLoad" ID="79980001" STATUS="200" LEN="24" />
socketLoad=100&rfcLoad=0
Feb 17, 2007 1:44:59 PM ...ket.server.SocketConnection.CRMSERVER [WorkerThread-
1] Debug: response time of command GetLoad: 0
PLS help
Thanks in advance.

Hi
I m getting the below error while clicking the configuration link in the product catalog. Any idea pls?
java.lang.ArrayIndexOutOfBoundsException: Array index out of range: 0
     at java.util.Vector.get(Vector.java:709)
     at com.sap.isa.ipc.ui.jsp.action.GetMFATabAction.ecomPerform(GetMFATabAction.java:170)
     at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
     at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1069)
     at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:455)
     at com.sap.isa.core.RequestProcessor.processForwardConfig(RequestProcessor.java:267)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:279)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)

Test configuration error

Similar Messages

Maybe you are looking for