Test creation of hr master data/objects
Hello,
in my programm i need to create some objects(training events, groups, types, locations,..)/infotypes. I would like to offer to enduser some "testing/simulation" behaviour - the infotypes will not be stored in database at the end of processing. So i wanted to use parameter vtask = 'B' - buffer of FMs RH_OBJECT_CREATE and RH_INSERT_INFTY and at the finish of procces call FM RH_UPDATE_DATABASE in case that the user wants to store information, in other case call this fm with parameter CLEAR_BUFFER = 'X' to clear this buffer. But when i was making some test the bufer was not cleared and the objects were created after calling this fm at next runs of programm.
So my question is: how should i clear the buffer?
Thanks,
JJ
The following function calls might help..
RH_CLEAR_BUFFER
RH_DELETE_BUFFER
RH_PM_INFTY_BUFFER_REFRESH
~Suresh
Similar Messages
-
Unable to delete master data line items - Master data object CCHIUSRAM
Hello
We have an issue with the Master data Object CCHIUSRAM - CC Hier User Auth Maintenance. It has only master data and no texts no hierarchy. It is not time-dependent. It has /BIC/PCCHIUSRAM, /BIC/SCCHIUSRAM as database table only. This master data is not being used in any infoproviders.
In development client we are able to delete the line items of the Master data along with entering line items. RSRV check gives green for all checks.
In Test / Production client we are not able to delete the line items of the Master data. We are only able to enter master data lines and if we change any item then it creates another entry in the table.
Tried SE14 & RSDMD_DEL_MASTER_DATA - both does not help.
Did ST05 trace, could not find something concrete.
If any one has faced such an issue with any master data item then a response is much appreciated. It has become a bottleneck for us.
Many Thanks in advance
Pradip ParmarThanks for the response.
I can do this in EBD, but it is working fine in EBD. I cannot do this activity in EBP / EBT as the systems are closed and I cannot activate directly in EBT / EBP.
Besides, I have recently transported active versions of the object in EBT / EBP all again twice to see if it changes anything.
My guess is that, there is something stupid may be I am missing somewhere.
Any help is much appreciated.
Thanks -
Unable to activate a Z Master data object
Hi All,
We have a master data object already with some Attributes loaded. I have added few more info objects as attributes to the same and marked them as Navigational. But I'm unable to activate this Master data object. "Error in activating the info objects". I repaired the info object from RSD1 (RSDG_IOBJ_REORG), and then tried to activate it. But in vain. Tried to activate it back ground. The job IOBJ_ACTIVATE is successful but in the job log it says . "Characteristic Z_ORD_MD: Error when generating master data routines
Error when resetting InfoObject Z_ORD_MD to the active version"
We have recently upgraded our BW system from 3.5 to BI 7.0. Requesting your expertise in solving this issue.
Warm regards,
Suman PittaWhat is SP level? please check...
Extras - check number range for SID
- Generate routines for Active ver
- Database tables - status - check all the tables for IO
Perform RSRV All elementary Tests for IO and let me know -
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
How to find the size of the master data objects in the BW system?
Hi,
We would like to understand the size of the master data tables overall for a specific source system (Logical name is Ex.ABCD, which supplies all master data to BW). Can you please advise the procedure to find out this?
Is there any table that will allows to see all the master data objects related to specific sources system so that we can find out that table size? Thanks.
For example, we have many Texts, Hier & Attributes.
0COUNTRY_TEXT
0REGION_TEXT
0PERSON_ATTR
0MATERIAL_LPRH_HIER
Advance Thanks.
Edited by: BW USA on Feb 2, 2010 10:52 AMHi,
You can find out all the master data tales used in the BW system by
Tcode : SE11
Enter as /BIC/P* for master data tables and press F4 which gives list of master data tables currently used in BW system.
Similarly for Texts /BIC/T* and press F4
Similarly for Hierarchies /BIC/H-* press F4
and can know the size of the all tables.
Thanks,
Gopal -
Error during create CR for MDGC "Enter a relevant role for creation of customer master data"
Hello Experts,
I am unable to create a Customer CR in 'MDG 6.1 Customer UI' , the UI throws an error saying "Enter a relevant role for creation of customer master data".It looks like it is expecting me to mention the BP role ( like FLCU01 Customer or FLCU00 FI Customer ) , but I don't see that BP role section in the Customer UI to mention .
While creating the vendor CR , I am able to enter the BP role ( like FLVN01 vendor or FLVN00 FI Vendor ) in the UI BP Role section.
Following are the UI's for Customer and Vendor
Customers BS_OVP_BP: BS_OVP_CU > OVP: BS_CU_OVP - I do not see BP role section here.
Vendors BS_OVP_BP: BS_OVP_SP > OVP: BS_SP_OVP - This is working fine , I see BP role section here.
Please advice what I am missing here , what should I do for the successful CR creation . Should I change the UI for Customers or do I need to do anything in CVI configuration.
Thanks,Hi Abdullah,
You were right in the first place the UIBB is missing , the UIBB 'Role' was present in the 'Search Customer' page but not available in the 'Create Customer CR' page , so I created the 'Role' UIBB again and was able to create the CR now . Not sure how it got deleted in the first place , is there any options where we reset the UI screen to the default initial configuration
But after approving the CR , only the Business Partner BP is getting created and the Customer is not getting created . Not sure what might be the issue now. Is there any config that tells to automatically create customer when BP is created. I was able to create Vendor using the create Vendor CR before.
Thanks -
Master Data Governance & Implementation of SAP Master Data Objects
I would like to get hold of a case study on Master Data Strategy Governance Framework and Implementation of governance processes for Master Data Objects acrosss all SAP Modules. Governance processes do not have to use SAP MDM for master data management.
If any one in SAP community has implemented Master data governance, I would like to benefit from their experience and hence the requestHello,
Not sure what sampling approach is, but it certainly help build a business case if you can provide sample data and case studies.
You may refer the SAP Provided PDF and presentations, to build your Business Case.
[SAP MDG|http://www.sap.com/solutions/enterprise-information-management/master-data-management/master-data-governance/index.epx]
Regards,
Abhishek -
Problems with HowTo "Creation of BI Master Data in Integrated Planning...)
Hi,
one of our customers need a planning application in which he can create master data for different attributes, insert some key figures for this attributes and changes already planned key figured.
For the last two point I've already found a working solution, the first point (creating of masterdata in web template) is still a problem. After a little search, I found a howto-guide "Creation of BI Master Data in Integrated Planning (IP) through Web Layouts", in which the necessary steps are described, how to do this (please see following link: http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6)
Does anyone of you know this guide and was able to build a working solution?
I have different questions, maybe you could help me:
- what kind of variable is he using?
- do I need a DataProvider in Web Template?
- how do I get the connection to the used variable in the button group?
Thanks for your help.
Regards
TimHi Timo,
you require two howtos to implement the solution.
First, please take a look at the first document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d2b273-0e12-2c10-fab3-a34bde559f92?QuickLink=index&…
In chapter 3 you see the prerequisites (note 1101726 and notes 1384495, 1387004 and 136772). By this, you change the system behaviour, not to check if the new inserted master data is valid (it can't be valid, because the entries are new!)
And after this please implement the solution from the how to.
Furthermore you can take a look at this how to, which might help you too:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/607193d5-cdd5-2b10-c699-8ff04c3124f6?QuickLink=index&…
Even if my first post is a bit old, my customer still uses this solution, at the moment we are on 7.3 sp06, so it is working in newer releases too.
Hope this helps.
Regards
Tim -
Auto creation of Batch master data when external batch no entered in PR
Dear All,
At persent we can auto create batches at production order creation level, Goods receipt level.
In same way how we can achive auto creation of Batch master data at Purchase Requisition level.
Regards,
ManojThere is no auto-creation of batches that are entered in ME51N. SAP issues message ME178 telling you that the batch entered does not exist.
You have to maintain the batch in MSC1N first, then you can enter it in the PR. -
Creation of Tech Master data with CRM IC Web Client
Hi Experts,
I have a query regarding creation of Technical master data via CRM IC Web client ( CRM7.0 & ECC6 for ISU)
1) If we are using CRM IC web Client then , how the creation of Technical Master Data is triggered from web client ?
2) Where the technical master data created first ISU or CRM ?
If anyone has the info on this please let me know.
regards,
SagarHi Sagar Arvind Phirke,
1) You need to configure CRM Middleware to exchange data between CRM and IS-U;
2) Data is created first in CRM, then it's replicated to IS-U.
Check this helpful documentation: http://help.sap.com/saphelp_crm70/helpdata/en/46/66235fc77c453a8696f76c66e8014c/frameset.htm
Best Regards,
Pedro Nunes -
Creation of Location Master Data
What's the transaction code for creating Location master data or program SAPL0A02? Has anyone tried to do LSMW or SCAT for uploading hundreds of items?
Hi,
If I am correct we can create locations through SPRO transcation.
Enterprise Structure>Definition->Logistics General--> Define location.
Here we can create number of locations on plant wise.
The key in this field indicates a location within a plant.
You can use the location to set up a plant according to space and local area. You can assign an address to a location.
The following master data objects can be referenced to a location:
Asset master records of asset management
Equipment
Functional location
Work center
Production resource/tool
Regards
Srinivas -
List of Master Data Objects in ECC 6.0
Hi All,
Can anyone please provide me a list of Master Data Objects in ECC 6.0? *\[removed by moderator\]
Thanks,
Kaushik Koli.
Edited by: Kaushik Koli on Jul 1, 2008 1:20 PM
Edited by: Jan Stallkamp on Jul 1, 2008 4:32 PMHi Gareth,
Thanks for your reply.
I know it is not an easy task but I need to provide a list of master data objects in ECC 6.0.
Can you atleast tell me where to start from? Any manual way of finding it will also do?
Regards,
Kaushik Koli. -
Hi Folks,
can any one please tell me how can i delete a particular keyfigures data i na master data object.
just i loaded wrong data to the keyfigure.i want to delete the whole data for the keyfigure only.so any one please help me .its very urgent.
Thanks in advance.
ashok.Hi Ashok,
you cant delete particular attribute (as keyfigure in ur case..) data for particular master data.. you need to delete entire master data once.. but before that you need to delete transactional data related that master data.. and then load once again with the correct data...
but you can't delete particular attribute(key figure data)...
otherwise.. you can load once again the correct data.. because.. if you load same data means master data will just ovverwrite the previous data so, you can try with this option also..
regards
@jay -
Transaction code to list the warehouse master data objects
Hello all,
Is there any transaction code that lists all the warehouse master data objects/ reports. If there is any transaction code or document related to it pl. post it.
Thanks,
maxxHi Greetings
Transaction : SAP1
Logistics Execution --> Warehouse Management --> Master Data
You can find Number if WM master data reports.
Gobinathan G -
Master data object - Available for reporting related
Hi Colleagues,
I want to load some 'duplicates' to info Object X. Meaning I have all values same but differ in one attribute. (Key is same). I do not want to use compounding for few reasons. I have not explored on functinality masterdata for reporting (Flexible update, not sure i used correct word) Can you please extend help in understanding the following..
Questions 1:
I understand that I can make available for reporting the existing master data object.
2) Can I add some code to allow duplicates there?
3) Can still the infoobjet navigational attributes has the same functionality - meaning they can be reported from reports of this newly extended masterdata?
Thanks for your time.
Best Regards,
HariHi Arun,
Thanks for your time..
Infoobject alread exists with out the attribute below at the monet. It is also available in the cubes for my reporting on cubes..I would like to add the following attribute for my phase 2 for my new reporting needs..
Data:
<u>Infoobject - Attribute,</u>
SKU1 - GRP1
SKU1 - GRP2
SKU2 - GRP2
The issue is with the 1st 2 records.. As I do not have the componding.. My Cube already have Infoobject with lots of data... I do not want to add attribute componding as it demands for the presence in the cubes also. So I have to double the current data base size.. Ahh I do not want this..
Coming to reporting on the cube
I would like to report on both the things.. Like..
Including attribute
SKU1 GRP1 abcd
SKU1 GRP2 abcd
SKU2 GRP3 xyz
excluding attribute
SKU1 abcd
SKU2 xyd
We do not have any keyfigures..none is related with time..
Hope I am clear..
Thanks for your time,
Regards,
Hari
Message was edited by: Hari Kiran
Maybe you are looking for
-
i have I phone 4s facing this error, cannot sign in the operation couldn't be compleated.(com.apple.ppleaccount error 403.)
-
Hello I just trying to run a java program in Mandrake Linux 8.2. Everythings work well except the fonts. I did read this page http://java.sun.com/j2se/1.3/docs/guide/intl/fontprop.html but the problem still there. Because I don't know how to modify t
-
Need Help! Got problem with ppp multilink. Set up it, but the interface show down, like that in both side: Serial4:0 unassigned YES manual down down Serial5:0 unassigned YES manual down
-
Pass parameters into iBot?
Hi, We are trying to use iBots to generate a set of PDF files for many different parameter combinations. Is it possible to pass parameters (like a parameter file) into an iBot and have it run the same answers request for each row in the parameter fil
-
I cannot place a call on my mac book
I just installed facebook on my mac book. I have all the system requirements to run facetime. I can dial an iphone and ipad, but when my callers acknowledge, facetime just keeps ringing on my mac, while my callers report that their apps says it is