Test / Export Movie Error

CS3 Flash. Just installed. When I go to Test movie or Export
Movie I get this error:
Error creating Flash movie file. ....
Locked drive.
I am running Leopard and unlocked my drive in the "get info"
but it automatically locks it again.
Strangest thing that I have seen.
I can export to an external drive but not my hard drive. I
have no problems with previous versions of Flash.
I can although save the movie to my hard drive.
any ideas?

Go into Publish settings and then to the Flash tab and down
at the bottom make sure that "device sounds" isn't checked. Unless
you are publishing for a mobile phone or something like that, you
don't want that checked.
I think…

Similar Messages

Unable to Export Movie (Error code = -32766)

I get this error message when I try to export as .flv a short (10 sec) movie created in iMovie using three photographs (for use as flash slideshow on a website). Here's what I'm doing: Share>Export Using Quicktim>Export Movie to Flash Video>Save>Error Message.
Anyone got any ideas? Thanks!

No it is not answered, but since no one has any comment, just forget I ever posted it.
Bye.

Canon HG10 - Export Movie Error -2125?

HI,
My workflow is basically, Plug in camera, import the clips from hdd (which takes ages since it converts from AVCHD to Apple lossless and takes up much more space than the original movie) - I drag and edit the clips to make a small movie then choose export video and set the quicktime options to 720p - it sits there quite happily spending hours rendering the movie and promptly quits with an error code, why does iMovie doe this, and is there any way to actually export from iMovie 08 at least HD content? (after all it DID import HD content....)
-M

I have the same error. Tried everything. The project is quite large, so I tried to split it in smaller parts and then sharing to external HD via QT or just export movie with default settings as "large". After ~300 minutes (that is, in fact, 5 hours for just one part) of exporting it says that it could not export the movie due to error -2125. That error number should mean something, shouldn't it? Something to give a clue what is wrong (with me apparently)...
And, no, iMovie 06 will not work either, because it does not support that sony camera.

Problems when trying to test/export movie

Hello. I'm working with Flash CS3. When I test a scene, all
work just fine, but when I try to test movie, or export the swf
file the process stops suddenly and nothing happens.
Do you know what might be causing this? I already tried to
uninstall flash player and intall previous versions as well, but
not working. Yesterday, I managed to export movie just once, but
now is seems permanent!!
In my fla file I have 9 scenes and the file size is about
50mb.
Thanks

If your entire file size is 50 MB, your exporter is likely
just running really slow. Think of it like rendering a video, the
more stuff you have the longer it takes to export. Flash often
appears "non-responsive" during the export if there is a lot of
processing that has to happen. It may even slow your computer down
a bit. I suggest trying to wait for a while (like up to 10 minutes)
for the export to finish, before determining it is actually
unresponsive.
My Flash CS3 also slows down sometimes, when have a lot of
programs open and using RAM, the export sometimes slips into
unresponsive mode, but then comes back on around 30 seconds to 1
minute later. My file size is < 1MB too, so patience may be your
saving grace.
Another option would be to make a new swf player, that can
load each of the 9 scenes as separate swfs. This may be better for
you in the end anyways, as 50 MB is VERY large for the web. Then
you could export each scene individually as its own swf, and load
those swfs as needed into a player.

IMovies 09 (8.0.6): Unable to Export Movie: Error -43

OS: 10.7.2
Imovie 09: 8.0.06
When I go to export a movie using Share --> Export Using Quicktime
A popup comes up and says:
Can't export Movie becasue an erro occured. -43
What is error -43? The error is not very descriptive.
Thanks, Jim

I have my souce movies stored on an external 500gb drive, with 35gb free. The drive in the laptop has 30gb free.
I was able to get imovie to use the external hard drive to store the movies by creating a symlink from $HOME/Movies to /Volumes/Movies.
Jim

Unable to export movie Error code = -2002

I am exporting using quicktime on my MacBook, Movie to MPEG4, options H.264, Data Rate 1700, image size 768x576 SD, frame rate 30, Key Frame Automatic.
iMovie opens a window that says Exporting project, the line shows progress until it gets to the end, then the error comes up.
Any idea what this error is and what is happening?
Thanks

No it is not answered, but since no one has any comment, just forget I ever posted it.
Bye.

Cannot export movie, Error -36 - tried everything.

hello my friends.
i have the imac 21.5 running on osx.8.4.
i am editing a movie (dur 7:00 with a lot of material).
when i tried to export it a first he would export but in the last second the exported file was missing (searched 1080p ex.. in spotlight and couldnt find it).
and now when i am trying to export it , imovie says : "unexpected error -36"
tried to finalize project - it ended up also in error -36
tried to consolidate media - not responding.
tried to upload via youtube - after 4 hours of waiting it told me that i have network problems (which i didnt).
please imovie experts , i need your help.
what else can i do?
thanks alot,
shahar.

Have you tried this?
Go to SETTINGS--> PRIVACY and then PHOTOS; make sure iMovie is set to "on".
Should work then. (Did for me).

Exporting movie errors

Hello
I've seen references to these errors in the forum, but no clear indication as to what the fix is or what caused it.
Export to 1080p I get error -108
Export to 720p I get rror -50
I am able to export to quicktime....
The movie is 1 hour long. My hard disk has 90GB left, should be enough? I have 4 GB of ram, and am running snow leopard with the latest update, dito for imovie 11, all the latest updates.
I want to burn it via idvd, so I'm not sure if exporting the movie to quicktime is the best way? Quality wise? I'm not a video expert.
Does someone have a clear idea what causes these errors? I can't find a definitive error code listing from apple.
If I can't export this movie in 720p, I will cry myself into dehydration.
Thank you all

Update:
I called apple support, and they were very helpful. The jist of it is, in my hour+ long movie, and have many many small clips with many small audio clips as well. This is likely too much for the finalizing process. The solution is to do one of the following:
1. chop the movie up into quarters, and export them mpeg4 with the h.254 codec
- reimport them as events and create a new project with the 4 clips
- finalize them or export them to whatever format you want and need.
This should work just fine. Will give this a go, but running out of time today so will try later on.
Hope this helps someone else.

Problem on flash, cannot play movie error(Adobe Flash CS3 stop working)... help guys...

Just a minute ago my .fla file can be played. But after several minute when I added movie clips and animations. It just crashed down I guess, Adobe Flash CS3 stop working. I'm using Microsoft Vista operating system. I have an antivirus subscription which is McAfee with automatic update. I think it's a virus or what? I dunno what to do. I got a long way already with my animation on my file. When I will start from the very beginning it would be a mess and it will consumed a lot of time.
Four to five attempts of testing the movie:
error msg: Adobe Flash CS3 stop working.
After several minute, test the movie again:
error msg: Flash CS3 memory overload, I dont know the exact error message.
I inspect the microsoft dialog and views the problem, it says APPCRASH, Flash.exe and has several .dll and other components did not load.
Need help,
Godspeed us all,

first, open flash without opening a fla. if it opens ok, create a new fla and save it. close flash and reopen the new empty fla and test it.
if that all works ok, open your project fla. save it with a different name. close flash, reopen the renamed project fla and attempt to test it. any problem?

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

[Error 333] Cannot export movie at all

Hi All,
I have created a new movie using iMovie 8.5 (latest version included in iLife 09).
Unfortunately, when I try to export my first project, after few minutes of processing (the blu progress bar fully completes the process) it gives me an error saying that is Imposssible to export the movie, error 333.
I have not registered yet my iLife, could be that one the reason or could be something else?
To me is so weird, if was the registration it should have been said before..
Thanks a lot
Daniel

Hello,
Are you having a similar problem as this?:
CIRCUMSTANCES:
I have the most recent version of OSX and of FCPX and yet I cannot export or "Share" my timeline's Project.
I have the simplest project (a sequence of small video clips with no effects at all) and the program does not let me "share" anything.
I have been using FCPX since the first week it came out; it's not like I'm completely lost (I have already done many jobs).
DOUBT:
WHY ARE ALL THE SHARE* OPTIONS INACTIVE?
*Either selecting the Project from the browser or clicking directly on the Timeline, the Share options I'm referring to are found on File > Share > ....
ANSWER:
If your Sequence contains one single Clip which was not well imported from the camera, FCPX will not let you "Share" (Export) the Project at all (The timeline's sequence). FCPX is probably wanting to alert you by means of a yellow triangle on the Event's icon, right at the corresponding missbehaving Event. Click on that Event, scroll down through all your clips on the Browser and you will most probably find a clip with the same yellow triangle with exclamation mark.
In order to detect the wrong clip (or clips) on the timeline, you shall click on the timeline you are not able to export (that is, to "Share") and, once you have clicked on the timeline itself, open your "Timeline Index" ( which shortcut is: shift cmd 2 ).
Once in the Timeline Index, click on "Clips" (upper left, under the small search window) and also click on Video (at the bottom of the whole Timeline Index box).
Now you have the whole list of all your clips which are used in the Timeline. Scroll down until you find all the marked clips (they are all marked with the same yellow triangle with an exclamation mark). Eliminate them from either the Timeline Index or directly from the timeline if you want to export anything.
I hope this was helpful to anyone with erroneously imported clips or any misbehaving imported media.

How do I export from IMovie when "not enough room in Heap Zone" error code appears? How can I correct, what to Do.."export movie" insteand of Media browser or IDVD? Finalize movie? I want to burn it to DVD!

How do I export from IMovie to Wondershare Creator to Make DVD and share hour long movie when I am unable to "publish" movie on Media Browser of IDVD because the error code "not enough room in heap Zone/ " appears and function is aborted.
I shortened the movie, that is no cure...Correcting date info on clips does not pertain. Why would Apple throw roadblocks in your way without solving problems they create?
A techie made an appointment on the phone and was totally incapable of addressing the problem.
What is a heap zone????

Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

File Write Error upon Export Movie

Using iMovie 9.09 under OSX 10.8.5
My sequence of events:
1. Import from Canon digital video camera
2. Create a project from the imported clips (no edits - it is an athletic event)
3. Share to iDVD
4. In iDVD create a disk image, then exit iDVD
5. Back in iMovie, Share>Export Movie (readying to upload to YouTube)
     Size to Export: HD 720p
     Filename is unique from any other used in this sequence
After rendering, get the following error:
So far, my only recourse is to quit iMovie, and restart the computer.
Any ideas?
Thanks,
Greg

Using iMovie 9.09 under OSX 10.8.5
My sequence of events:
1. Import from Canon digital video camera
2. Create a project from the imported clips (no edits - it is an athletic event)
3. Share to iDVD
4. In iDVD create a disk image, then exit iDVD
5. Back in iMovie, Share>Export Movie (readying to upload to YouTube)
     Size to Export: HD 720p
     Filename is unique from any other used in this sequence
After rendering, get the following error:
So far, my only recourse is to quit iMovie, and restart the computer.
Any ideas?
Thanks,
Greg

How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts?

How do I export my iMovie '11 video and burn it to a DVD? I've tried 'Share' - 'Media Browser', 'iDVD', and 'Export Movie' but always get an error message indicating that my movie is too long to publish. Thoughts? Additionally, what does 'File' 'Finalize Project' do?

Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

Catalog export results in -9111 Move error

I have an instance which I'd like to transfer to a new server via loader but doing the catalog export I get this error in KnlMsg:
Thread 0xCA6 Task 128 2010-04-15 07:25:50 ERR MOVECODE 20011: Bad parameter: source size [32768] dest size [8192], source addr [0x180d9998]+27, dest addr [0x671f120]+27, 14950 bytes to copy; module VAK15 , pos 24,_FILE=VAK15 ,_LINE=24
Thread 0xCA6 Task 128 2010-04-15 07:25:50 ERR SYSERROR 51080: -9111 Move error
This happens on 7.7.06.09 and also on 7.7.07.16. I guess there is some corruption in the DB but because it works well apart from export we didn't find it out. Any ideas how to find what is wrong or how to work around the issue?
Thanks,
Simon

>
Lars Breddemann wrote:
> > This happens on 7.7.06.09 and also on 7.7.07.16. I guess there is some corruption in the DB but because it works well apart from export we didn't find it out. Any ideas how to find what is wrong or how to work around the issue?
>
> Hi Simon,
>
> this is a known bug (PTS 1152792 - not public!) and should have been fixed in both versions.
> Is this a SAP system ? If yes, you should open a support message, so that we can analyze this in detail.
>
> regards,
> Lars
Hi Lars,
thanks for your message! This is not a SAP system.
You said it should have been fixed in our versions, does it mean the problem is now in our database and the fix doesn't help us? How can we correct the situation?
Thanks,
Simon

Test / Export Movie Error

Similar Messages

Maybe you are looking for