Test Livecache
Hi people,
I´m setup up the SCM/APO with livecaché. I´ve connected the LCA database with the scm system. But when I go to the LCA03 tcode for do the test I get four red messages.
/sapapo/om_reorg_daily
/sapapo/om_delete_old_simsess
/sapapo/om_lcaalerts
For this last, I follow the step of made the jobs. I do it, but when refresh the tcode LCA03 it´s is same. The other two jobs are equal.
And the last error is Lc sessions account, which indicates the MAXUSERTASKS. Where can i do to set up this parameter?
Hi,
The third point is correct.
The erros are that /sapapo/om_reorg_daily, /sapapo/om_delete_old_simsess, /sapapo/om_lcaalerts are with red check. I follow the steps for to do them and when i back to the realized the test I get the same errors.
I read in one thread that there are to execute /sapapo/opt_inst, for to see the RFC connections. I get the diferent connections on red. It´s possible that this affected the before step???
Edited by: Ruben Torres on Apr 9, 2009 12:10 PM
Another question. In the sm36 I select the standart jobs and push standar prevision, then when I back to the tcode LCA03 don´t show me the screen with the diferentes options with the checks greens or reds. Only show me one message that says "liveCache-test onLCA finished without errors". It´s normal?? Not should be show me the screen with the diferents checks????
More thanks
Edited by: Ruben Torres on Apr 9, 2009 1:06 PM
Similar Messages
-
Logical Test (/SAPAPO/OM03) fails with liveCache-test on LCA incorrect mess
Hi All,
On SCM 5.0 instance, when running logical test transaction (/n/SAPAPO/OM03), I get the following message at the end of the test:
liveCache-test on LCA incorrect.
There is no shortdump or any database errors I can see. Please advice.
Many Thanks,
Regards,
NischHello Nisch,
You are running SCM 5.0 system, therefore you are SAP customer. Please create the SAP ticket concerning this issue => we could logon via OSS and check the status of your system.
-> If you are running the SCM 5.0 installation, you have to follow the liveCache installation guide and finish all post installation steps, run //om13 -> checks , click on the info box of the red semaphores u2026
Review the system logs in /nsm21.
Then you could run /SAPAPO/OM03, it is the test Program for liveCache and LCA, in the liveCache relevant client.
If it's failed & you don't know the reason of the failure => create the SAP ticket to the component 'BC-DB-LCA'.
Thank you & best regards, Natalia Khlopina -
Hello Experts,
Iam new to Livecache and AP0 and was trying to understand the process of backups reason i need to perform complete SCM 7.0 systemcoopy . In past i have done system copies and well aware of the procedures .
Here it goes Presently we are on SCM 7.0
Question :--> I see our Livecache is installed on one machine and AP0 on another machine. Iam not aware how Livecache
was integrated with AP0.
Iam trying to understand how to take backup of livecache and then restore the same in Target.
In LC10
LCA --> ProblemAnalysis --> Logs --> DBA History
i can see that the live cache backups are in getting successfully everyday.
I see that Backup Label as DAT_000000<xxx> and Backup Template as bac214<xxx>.
Where can i see this Backup Template defined ( the path ) .
Can someone provide an insight regarding the live cache backups.
Checked SAP Note 457425 .
--> After system copy how would i integrate Livecache and AP0 .
Thanks in Advance.
MedhaHello Medha,
1.
a)
Please review all recommended steps in the SAP note:
886103 System Landscape Copy for SAP SCM
when you are planning to do the SCM system copy.
For SAP liveCache documentation please see the SAP note 767598.
b)
SAP link:
SAP liveCache technology
-> Best Practices for Solution Management: mySAP SCM
review:
"Checklist for Recovery of SAP APO liveCache >= 7.4"
< It will be helpful to practice the steps of the document on the test liveCache instance first >
2.
Sessions: http://maxdb.sap.com/training/
=>
Session 2: Basic Administration with Database Studio
Session 3: CCMS Integration into the SAP System
Session 11: SAP MaxDB Backup and Recovery
Those sessions will help you. If you still have some questions after that => update the thread.
4.
Took classes for the MAXDB database administration or get the SAP consulting support.
Regards, Natalia Khlopina -
While running the livecache server test a native sql error occures
We are using scm4.1 livecache 7.5.0 And every time we are running the livecache test program he is dumping
whith the following dump
patch level scm & scm_basis is 8
Runtime Errors DBIF_DSQL2_SQL_ERROR
Except. CX_SY_NATIVE_SQL_ERROR
Date and Time 31.10.2005 16:50:55
ShrtText
An SQL error occurred when executing Native SQL.
What happened?
Error 600 occurred in the current database connection "LCA".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
How to correct the error
Database error text........: "Work rolled back: DbpError -28814 in
APS_ORDER_CH"
Database error code .......: 600
Triggering SQL statement...: " ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
? ? ? ? ? ? ? or'"
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"/SAPAPO/SAPLOM_PLANNING" or "/SAPAPO/LOM_PLANNINGU08"
"/SAPAPO/OM_ORDER_CHANGE"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"/SAPAPO/OM_ORDER_CHANGE"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "bebruap2"
Network address.......... "195.213.49.227"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 16 Bits
Pointer length........... 32 Bits
Work process number...... 1
Short dump setting....... "full"
Database server.......... "BEBRUAP2"
Database type............ "MSSQL"
Database name............ "APD"
Database owner........... "apd"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Aug 23 2005 00:00:49"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "87"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8176
EM....................... 24040336
Heap..................... 0
Page..................... 1687552
MM Used.................. 1516920
MM Free.................. 572032
SAP Release.............. "640"
User and Transaction
Client.............. 000
User................ "CGRAULS"
Language key........ "E"
Transaction......... "/SAPAPO/OM03 "
Program............. "/SAPAPO/SAPLOM_PLANNING"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "/SAPAPO/SAPLOM_PLANNING" in
"/SAPAPO/OM_ORDER_CHANGE".
The main program was "/SAPAPO/OM_TB_FLOW_QUANTITY ".
The termination occurred in line 91 of the source code of the (Include)
program "/SAPAPO/LOM_PLANNINGU08"
of the source code of program "/SAPAPO/LOM_PLANNINGU08" (when calling the
editor 910).
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "/SAPAPO/OM_ORDER_CHANGE" "(FUNCTION)" but was not handled locally,
not declared in the
RAISING clause of the procedure.
The procedure is in the program "/SAPAPO/SAPLOM_PLANNING ". Its source code
starts in line 5
of the (Include) program "/SAPAPO/LOM_PLANNING$08 ".
Source Code Extract
Line
SourceCde
61
is_gen_params-simversion
62
is_gen_params-dont_set_netchg_flag
63
space.
64
65
Kontrollstruktur IS_GET_CHANGED_OPTIONS anpassen.
66
IF NOT et_changed_orders IS REQUESTED.
67
is_get_changed_options-send_chg_top_order = gc_false.
68
ENDIF.
69
IF NOT et_changed_cap_reqs IS REQUESTED.
70
is_get_changed_options-send_chg_cap_req = gc_false.
71
ENDIF.
72
IF NOT et_changed_io_nodes IS REQUESTED.
73
is_get_changed_options-send_chg_ionode = gc_false.
74
ENDIF.
75
IF NOT et_changed_io_pp_nodes IS REQUESTED.
76
is_get_changed_options-send_chg_io_pp = gc_false.
77
ENDIF.
78
IF NOT et_changed_pegids IS REQUESTED.
79
is_get_changed_options-send_chg_pegid = gc_false.
80
ENDIF.
81
IF NOT et_deleted_fix_pegging IS REQUESTED.
82
is_get_changed_options-send_del_fix_peg = gc_false.
83
ENDIF.
84
start_function 'OM_ORDER_CHANGE'. "#EC *
85
Verbindung zum liveCache aufbauen
86
check_server.
87
connect_to_livecache.
88
COM-Routine zum Anlegen bzw. Überschreiben eines Zeitstrahls
89
90
EXEC sql.
>>>>>
execute procedure "APS_ORDER_CHANGE" (
92
in :ls_gen_com_params,
93
out :lv_rc,
94
in :et_rc,
95
in :it_order_method,
96
in :it_ordkeys,
97
in :it_ordmaps,
98
in :it_orders,
99
in :it_activities,
100
in :it_mode,
101
in :it_cap_reqs,
102
in :it_positions,
103
in :it_inputs,
104
in :it_outputs,
105
in :it_prodflow,
106
in :it_intern_constraints,
107
in :it_extern_constraints,
108
in :it_charact_val_acts,
109
in :it_charact_req_inpnode,
110
in :it_charact_val_outnode,
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
1
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Flow Quantity Test
SY-MSGTY
S
SY-MSGID
/SAPAPO/OM_TEST
SY-MSGNO
001
SY-MSGV1
Create transSim
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
3 FUNCTION /SAPAPO/SAPLOM_PLANNING /SAPAPO/LOM_PLANNINGU08 91
/SAPAPO/OM_ORDER_CHANGE
2 FORM /SAPAPO/OM_TB_FLOW_QUANTITY /SAPAPO/OM_TB_FLOW_QUANTITY 802
CHANGE_DATA
1 EVENT /SAPAPO/OM_TB_FLOW_QUANTITY /SAPAPO/OM_TB_FLOW_QUANTITY 11
START-OF-SELECTION
Chosen variables
Name
Val.
No. 3 Ty. FUNCTION
Name /SAPAPO/OM_ORDER_CHANGE
IS_ATP_INFO
01ATP0000001~CGRAULSXX##
334553333333744545455500
011400000001E37215C38800
000000000000000000000000
000000000000000000000000
IS_CONTROLPARAMETERS
霁က#ం̂⍱㔒鲔#####
2222222222222222222222001007190000022
0000000000000000000000100221240000100
0000000000000000000000910002390000000
0000000000000000000000700C335C000C000
IS_GEN_PARAMS
01PLV0000001~CGRAULS
3354533333337445454522222
010C60000001E37215C300000
0000000000000000000000000
0000000000000000000000000
IS_GET_CHANGED_OPTIONS
2222222
0000000
0000000
0000000
IT_ACTIVITIES
Table IT_274[1x256]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ACTIVITIES
Table reference: 41
TABH+ 0(20) = 5087FFDF00000000000000002900000012010000
TABH+ 20(20) = 0100000000010000FFFFFFFF0487000000290000
TABH+ 40( 8) = 10000000C1308000
store = 0x5087FFDF
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 41 (0x29000000)
label = 274 (0x12010000)
fill = 1 (0x01000000)
leng = 256 (0x00010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000205
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x180112E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 126 (0x7E000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CAP_REQS
Table IT_276[1x112]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_CAP_REQS
Table reference: 39
TABH+ 0(20) = 48BB06E000000000000000002700000014010000
TABH+ 20(20) = 0100000070000000FFFFFFFF04870000C0290000
TABH+ 40( 8) = 10000000C1308000
store = 0x48BB06E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 39 (0x27000000)
label = 276 (0x14010000)
fill = 1 (0x01000000)
leng = 112 (0x70000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000209
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x188D04E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 124 (0x7C000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CHARACT_REQ_INPNODE
Table IT_418[0x140]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_REQ_INPNODE
Table reference: 32
TABH+ 0(20) = 00000000000000000000000020000000A2010000
TABH+ 20(20) = 000000008C000000FFFFFFFF04870000301D0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 32 (0x20000000)
label = 418 (0xA2010000)
fill = 0 (0x00000000)
leng = 140 (0x8C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000142
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CHARACT_VAL_ACTS
Table IT_417[0x156]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_VAL_ACTS
Table reference: 50
TABH+ 0(20) = 00000000000000000000000032000000A1010000
TABH+ 20(20) = 000000009C000000FFFFFFFF04870000901D0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 50 (0x32000000)
label = 417 (0xA1010000)
fill = 0 (0x00000000)
leng = 156 (0x9C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000144
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_CHARACT_VAL_OUTNODE
Table IT_419[0x156]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_CHARACT_VAL_OUTNODE
Table reference: 60
TABH+ 0(20) = 0000000000000000000000003C000000A3010000
TABH+ 20(20) = 000000009C000000FFFFFFFF04870000901D0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 60 (0x3C000000)
label = 419 (0xA3010000)
fill = 0 (0x00000000)
leng = 156 (0x9C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000144
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_EXTERN_CONSTRAINTS
Table IT_416[0x124]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_EXTERN_CONSTRAINTS
Table reference: 71
TABH+ 0(20) = 00000000000000000000000047000000A0010000
TABH+ 20(20) = 000000007C000000FFFFFFFF04870000E02A0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 71 (0x47000000)
label = 416 (0xA0010000)
fill = 0 (0x00000000)
leng = 124 (0x7C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000215
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_INPUTS
Table IT_278[1x420]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_INPUTS
Table reference: 63
TABH+ 0(20) = 087400E0C0E303E0000000003F00000016010000
TABH+ 20(20) = 01000000A4010000FFFFFFFF04870000202A0000
TABH+ 40( 8) = 10000000C1308000
store = 0x087400E0
ext1 = 0xC0E303E0
shmId = 0 (0x00000000)
id = 63 (0x3F000000)
label = 278 (0x16010000)
fill = 1 (0x01000000)
leng = 420 (0xA4010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000211
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x78DC11E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 123 (0x7B000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x2029FFDF
hsdir = 0x00000000
ext2 = 0x00000000
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_INTERN_CONSTRAINTS
Table IT_415[0x124]
FUNCTION=/SAPAPO/OM_ORDER_CHANGEDATA=IT_INTERN_CONSTRAINTS
Table reference: 49
TABH+ 0(20) = 000000000000000000000000310000009F010000
TABH+ 20(20) = 000000007C000000FFFFFFFF04870000E02A0000
TABH+ 40( 8) = 10000000C1308000
store = 0x00000000
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 49 (0x31000000)
label = 415 (0x9F010000)
fill = 0 (0x00000000)
leng = 124 (0x7C000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000215
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_MODE
Table IT_275[1x164]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_MODES
Table reference: 52
TABH+ 0(20) = A03C00E000000000000000003400000013010000
TABH+ 20(20) = 01000000A4000000FFFFFFFF0487000060290000
TABH+ 40( 8) = 10000000C1308000
store = 0xA03C00E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 52 (0x34000000)
label = 275 (0x13010000)
fill = 1 (0x01000000)
leng = 164 (0xA4000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000207
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC8F611E0
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 125 (0x7D000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_ORDERS
Table IT_293[1x320]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDERS1
Table reference: 47
TABH+ 0(20) = 20B403E000000000000000002F00000025010000
TABH+ 20(20) = 0100000040010000FFFFFFFF0400000030380000
TABH+ 40( 8) = 01000000C1308000
store = 0x20B403E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 47 (0x2F000000)
label = 293 (0x25010000)
fill = 1 (0x01000000)
leng = 320 (0x40010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000286
occu = 1 (0x01000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x9080FFDF
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 1 (0x01000000)
lineAlloc = 1 (0x01000000)
store_id = 130 (0x82000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_ORDER_METHOD
Table IT_268[2x62]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDER_METHOD
Table reference: 51
TABH+ 0(20) = 8882FFDF0000000000000000330000000C010000
TABH+ 20(20) = 020000003E000000FFFFFFFF04000000B0360000
TABH+ 40( 8) = 10000000C1248000
store = 0x8882FFDF
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 51 (0x33000000)
label = 268 (0x0C010000)
fill = 2 (0x02000000)
leng = 62 (0x3E000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000278
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x0868FFDF
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 122 (0x7A000000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = Not allocated
hsdir = Not allocated
ext2 = Not allocated
>>>>> 2nd level extension part <<<<<
tabhBack = Not allocated
delta_head = Not allocated
pb_func = Not allocated
pb_handle = Not allocated
IT_ORDKEYS
Table IT_271[1x332]
PROGRAM=/SAPAPO/OM_TB_FLOW_QUANTITYFORM=CHANGE_DATADATA=LT_ORDKEYS
Table reference: 29
TABH+ 0(20) = 80E303E000000000000000001D0000000F010000
TABH+ 20(20) = 010000004C010000FFFFFFFF04870000E0270000
TABH+ 40( 8) = 10000000C1308000
store = 0x80E303E0
ext1 = 0x00000000
shmId = 0 (0x00000000)
id = 29 (0x1D000000)
label = 271 (0x0F010000)
fill = 1 (0x01000000)
leng = 332 (0x4C010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000199
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0Hi,
the error DbpError -28814 denotes that an object cannot be found.
Can you maybe tell me your exact liveCache version (incl. Build level) and LCA Build?
Additionally, please copy the relevant error information from the file (/sapdb/data/wrk/<SID>/)knldiag.err into this thread.
Which exact 'liveCache test program' are your referring to (which of the /SAPAPO/... transactions)?
Kind regards,
Roland -
Error while accessing Livecache from LC10
We had a problem on our APO system that dialog work processes are hanging on the central instance showing semaphores 26 (enqueue table) and 43 (rspo cache).
The dwstat logfile indicates that the enqueue process is running (with the longest processing time of all processes), while the spool process is stuck with semaphere 26 on "global actions".
The problem is mostly likely caused by a bug in SAP and two recent SAP notes were found that describe the situation: note 1293472 and note 661487.
The first one states to update the kernel and set rspo/event_update_nocsec = 1, the second one to add an entry to the table TSPOPTIONS.
now we are upgrading the SAP Kernel to Patch Level 221 that was released on Aug 28.
kernel release 700 - 64 BIT - Non-Unicode
But after upgrading the kernel to the patch 221 we are not able to access livecache through LC10, LC10 hangs for a while and then fails with a RFC error
Name and Server : LS5 u2013 plsapas500
DBMRFC Function : DBM_CONNECT
Error: Communication Error
Error Message: Error when opening a RFC connection
further we found that the RFC connection SAPDB_DBM_DAEMO is not registered for program dbmrfc@sapdb.
tried to register it but no success....
this problem was not faced with old Kernel havin patch 185
kindly suggest
thanks & regards,
Deepakhello,
Can you check the connection test in db59 and check the detailed log.
check this if helpful: Re: LC10: system error
thanks,
Prasanna Kulkarni -
No username of Source system is avbl after livecache system copy
Hi Experts
I have done a livecache system copy from the source system to target system. Here the steps are
Assume my Source SYstem Livecache is RP1 and Target System livecache is RS1.
1. Taken Source system livecache DATA and LOG Area backup RP1.
2. Defined the same source system backup medium name in Target System (RS1 and moving the Source system Liveacache backuped files to Target system and defined the medium name as per that)
3. put the livecache db_admin mode
4. db_activate RECOVER <medium_name>.
5. recover_start <log_medium_name> LOG <nnn>
6. db_online.
Here we faced that
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
So we activated the SUPERDBA as " db_activate SUPERDBA,<password>
then it came to online. and afterwards we have used the load_systab command to load the tables.
BUT we could not find any Source System name like "RP1ADM" in the tables of the livecache database. Only there are CONTROL,SUPERDBA username availbale. Usually there will be also the source admin name . I dont know why it is missing
Before a month we have done livecahe restore same as now in that time we got the source system name admin also. ( RP1ADM) and also tables which owned by RP1ADM. alos i could find APPSYSPARAM table and the instance also registered.
But now in this restore we could not find the above.
We followed the same procedure and there is no change in the steps also.
Could anyone help me...
Regards
balaHello Bala,
1. As I wrote you already, the notes:
886103 System Landscape Copy for SAP SCM
877203 Post steps after the Homogenous liveCache copy using backup/
457425 Homogenous liveCache copy using backup/restore
has all recommended steps to do, when you will run the u201CSystem Landscape Copy for SAP SCMu201D
2. If you run the u201CHomogenous liveCache copy using backup/restoreu201D you should pay attention to the note 457425. After you imported the complete data backup < step 2. > you need to update the system tables.
To update the system tables you need to know the correct database SYSDBA user & password.
After you restored the databackup of the source database, start the database online & run u201Cselect * from usersu201D SQL command to see the SYSDBA user. Then check that you know the DBA user ( DataBase Administrator ) & password of the source database instance => Open the SQL session with this
user & password.
Example:
after db_activate recover <medium_name>
login as control,password
db_online
sql_execute select * from users
sql_connect superdba,<password of source system>
If you didnu2019t get error with the last command, then you could update the system tables with the superdba,<password of source system> using load_systab command.
The system tables will be updated & the correct SYSDBA user & password will be updated in *.UPC file.
3.
user_sysdba:
You make the database system administrator known to Database Manager. It is only necessary to use this DBM command if the database administrator is not known or is incorrectly known to Database Manager.
u201CI have tried like this
after db_activate recover <medium_name>
login as control,password
db_admin
user_sysdba superdba,<password of source system>
db_onlineu201D
You could update the .upc files with the wrong SYSDBA user password u2026
You was lucky, that you knew the correct SYSDBA user and password of the source database.
Example < NLK is my local database >:
A. I could update the .upc file with wrong password of SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba superdba,test
OK
dbmcli on NLK>db_online
OK
dbmcli on NLK>load_systab
ERR
-24909,ERR_DBAUNKNOWN: SYSDBA unknown
dbmcli on NLK>exit
B. I could update the .upc file with wrong SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba test,test
OK
dbmcli on NLK> user_get test
OK
u2026
dbmcli on NLK>sql_connect test,test
ERR
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
dbmcli on NLK> dbmcli on NLK>sql_connect superdba,admin
OK
I could connect as test,test; but the test user is NOT SYSDBA user u2026
dbmcli -d NLK -u test,test
dbmcli on NLK>
Itu2019s recommended to user the load_systab command, so the .upc files will be updated with the correct SYSDBA user/password or
you will get error.
4. http://maxdb.sap.com/doc/7_7/86/68627a1bc642e6a6f73d3bc7a55fe1/content.htm
You got error:
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
The automatically updating the system tables, according to the default value, is switched on.
After you will run the update system tables with the correct SYSDBA user & password the *.UPC file will be updated,
and with the next liveCache restart you will not get this error.
5. See more information in the MAXDB library:
http://maxdb.sap.com/doc/7_7/45/11cbd6459d7201e10000000a155369/content.htm
Thank you and best regards, Natalia Khlopina
Edited by: Natalia Khlopina on May 19, 2010 2:58 PM -
Problem in starting SAP liveCache server
Hi,
I am getting the following error message when i tried to start SAP liveCache server with LC10.
"Restart of liveCache LC3 on saplc3cache terminated; reason: User LC3RFC has lock"
Message no. LVC072
Does anyone has idea! abt the error? why it comes and how it can be solved?
Thanks,
VenkatHi Christiane,
The startup procedure is not even reaching the lcinit script. There are absolutly no logs in knldiag and lcinit.log files. After little bit debugging I found the problem. But don't know how to solve it.
The problem occured when I was doing disrptive testing for the liveCache server.
When I kill ("KILL -9 PID") the liveCache server processes (<b>master first and then child</b>) there are some IPC resources hanging over there. These IPC resources (shared memory segments) holds some locks and are preventing the liveCache server to startup.
The problem is not happening when I kill child first and then master process (all the IPCs are getting removed in this case).
I am wondering whether SAP has any tool to remove these IPC resources for liveCache server uniquely for perticular liveCache server (something similar to cleanipc for SAP systems).
I can't write a script to remove all the IPC resources based on the user name ('sdb') which same for liveCache server and MaxDB. (Imagine a case where MaxDB(APO DB) and liveCache server are running together). Any other solutions?
Any answers/suggestions are most welcome.
Thanks,
Venkat -
Cannot open SQL connection to liveCache LCA
Hi All,
when I'm trying to start liveCache I'm getting an error: "Cannot open SQL connection to liveCache LCA".
Operational state is online.
Kernel - 7.7.07
Next steps are successful:
"LC10 -> liveCache monitoring -> Tools -> dbmcli ::
a) sql_execute select * from users"
From Alert monitor I see an error: "Instance ONLINE, but no SQL access possible". If i try connection test, thenI see:
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4025
For detailed information, see the developer trace for work process: 2
How to see this developer trace I do not know...Mark, I have this tool installed.
In those logs I found that:
Thread 0x1A8 Task 35 2010-11-30 23:30:20 Pager 20018: First DataCacheSegment:31
Thread 0x1A8 Task 1 2010-11-30 23:30:21 SrvTasks 31: Permanently reserved 13 servertasks for 'Backup / Restore'.
Thread 0x1A8 Task 1 2010-11-30 23:30:21 SrvTasks 31: Permanently reserved 2 servertasks for 'Backup / Restore'.
Thread 0x1A8 Task 1 2010-11-30 23:30:21 SrvTasks 31: Permanently reserved 1 servertasks for 'Savepoint'.
Thread 0x1A8 Task 1 2010-11-30 23:30:21 RTETask 18: Kernel initialization done
DESCRIPTION:
The initialization of the Kernel components has finished. All special tasks are started now.
Thread 0x1A5 Task - 2010-11-30 23:30:21 RunTime 3: State changed from STARTING to ADMIN
Thread 0x1A5 Task - 2010-11-30 23:30:21 STATE 19601: SERVERDB is ready
============================================ begin of write cycle ==================
Thread 0x1AA Task 71 2010-11-30 23:30:22 CONNECT 19633: Connect req. (LCI, T71, connection obj. 0x000007FFFFE30BF0, Node:'kleva', PID: 6676)
Thread 0x1AA Task 71 2010-11-30 23:30:22 ERR RTEIO 12: attach of volume DATA_VOLUME_0001 failed during open,VOLUME_NO=1,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=1776
DESCRIPTION:
An error accurred when trying to add the volume DATA_VOLUME_0001 with the logical number 1 to the configuration and physically attach it.
ACTION:
Contact your system administrator. Show him the error message which points to an operating system configuration error and then contact the database support if your system administrator can not fix the error.
2010-11-30 23:30:22 ERR RTEIO 1: The opening of path 'C:\sapdb\LCI\sapdata\DISKD0001' failed,DESCRIPTION=CreateFile(READWRITE,OPEN_EXISTING),ERRORTEXT=The system cannot find the file specified.
,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=2385
DESCRIPTION:
An attempt to open the path 'C:\sapdb\LCI\sapdata\DISKD0001' failed. The operating system returned the error code 2 and the error text 'The system cannot find the file specified.
'. The complete command line reads 'CreateFile(READWRITE,OPEN_EXISTING)'.
Thread 0x1AA Task 71 2010-11-30 23:30:22 ERR Admin 3: Database state: OFFLINE,_FILE=Kernel_Administration.cpp,_LINE=692
2010-11-30 23:30:22 KernelComm 6: Internal errorcode, Error code 9050 "disk_not_accessible"
2010-11-30 23:30:22 ERR Admin 20017: RestartFilesystem failed with 'I/O error',_FILE=Kernel_Administration.cpp,_LINE=410
Thread 0x1AA Task 71 2010-11-30 23:30:22 CONNECT 19651: Connection released (LCI, T71, connection obj. 000007FFFFE30BF0)
Thread 0x1AA Task 71 2010-11-30 23:30:22 RTEKernel 112: Offline KILL requested
Thread 0x1AA Task 71 2010-11-30 23:30:22 RunTime 3: State changed from ADMIN to SHUTDOWNKILL
Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR Messages 7: Begin of dump of registered messages,_FILE=Msg_List.cpp,_LINE=3527
Thread 0x1A0 Task - 2010-11-30 23:30:19 RTEHSS 13951: No hot standby node configured -> No HotStandby configuration
Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR RTEIO 1: The opening of path 'C:\sapdb\LCI\sapdata\DISKD0001' failed,DESCRIPTION=CreateFile(READWRITE,OPEN_EXISTING),ERRORTEXT=The system cannot find the file specified.
,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=2385
DESCRIPTION:
An attempt to open the path 'C:\sapdb\LCI\sapdata\DISKD0001' failed. The operating system returned the error code 2 and the error text 'The system cannot find the file specified.
'. The complete command line reads 'CreateFile(READWRITE,OPEN_EXISTING)'.
Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR RTEIO 1: The opening of path 'C:\sapdb\LCI\sapdata\DISKD0001' failed,DESCRIPTION=CreateFile(READWRITE,OPEN_EXISTING),ERRORTEXT=The system cannot find the file specified.
,RETURNCODE=2,_FILE=RTEIO_VolumeInfo-k.cpp,_LINE=2385
DESCRIPTION:
An attempt to open the path 'C:\sapdb\LCI\sapdata\DISKD0001' failed. The operating system returned the error code 2 and the error text 'The system cannot find the file specified.
'. The complete command line reads 'CreateFile(READWRITE,OPEN_EXISTING)'.
Thread 0x1A0 Task - 2010-11-30 23:30:22 KernelComm 6: Internal errorcode, Error code 9050 "disk_not_accessible"
Thread 0x1A0 Task -Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR Admin 3: Database state: OFFLINE,_FILE=Kernel_Administration.cpp,_LINE=692
2010-11-30 23:30:22 KernelComm 6: Internal errorcode, Error code 9050 "disk_not_accessible"
2010-11-30 23:30:22 ERR Admin 20017: RestartFilesystem failed with 'I/O error',_FILE=Kernel_Administration.cpp,_LINE=410
Thread 0x1A0 Task -Thread 0x1A0 Task - 2010-11-30 23:30:22 ERR Messages 8: End of the message list registry dump,_FILE=Msg_List.cpp,_LINE=3555
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 61: rtedump written to file 'rtedump'
Thread 0x1A6 Task 3 2010-11-30 23:30:22 Trace 20000: Start flush kernel trace
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 111: Tracewriter resumed
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 94: Waiting for tracewriter to finish work
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 116: Tracewriter termination timeout: 1200 seconds
Thread 0x1A6 Task 3 2010-11-30 23:30:22 Trace 20001: Stop flush kernel trace
Thread 0x1A6 Task 3 2010-11-30 23:30:22 Trace 20002: Start flush kernel dump
Thread 0x1A6 Task 3 2010-11-30 23:30:22 Trace 20003: Stop flush kernel dump
Thread 0x1A6 Task 3 2010-11-30 23:30:22 RTEKernel 110: Releasing tracewriter
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6712 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6868 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEThread 13: The thread Requestor_LCI is finished
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEThread 13: The thread LegacyRequestor is finished
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6836 joining
Thread 0x1AC Task - 2010-11-30 23:30:22 RTE 20214: CONSOLE thread stopped
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6716 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6860 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6708 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 TASKING 19822: Thread 6864 joining
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 58: Backup of diagnostic files will be forced at next restart
Thread 0x1A0 Task - 2010-11-30 23:30:22 RTEKernel 118: SERVERDB LCI has stopped
2010-11-30 23:30:22 RTEKernel 14: Kernel version: Kernel 7.7.04 Build 029-123-196-543
Thread 0x1A0 Task - 2010-11-30 23:30:22 RunTime 3: State changed from SHUTDOWNKILL to STOPPED
Thread 0x1A0 Task - 2010-11-30 23:30:22 TENANT 20005: Tenant database LCI has stopped
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Looks like I'm not authorized to created folders/files in 'C:\sapdb\LCI\sapdata\'? But I can... -
SAP liveCache instance update exited abnormally
Hi MaxDB/Livecache,
While applying LIvecache patch from 07 to 13 i got this error.
checking unpacked archive... ok
installation of SAP liveCache APO LiveCache finished successfully Tu, Feb 05, 2008 at 17:14:33
finding instance type...
checking mmap support...
starting release already known
apo starting release already known
migration strategy already known
running finalize check...
current liveCache state is OFFLINE
checking parameters...
switch liveCache state to ADMIN
switch liveCache state to ONLINE
loading system tables...
checking catalog...
registering liveCache application procedures...
registering lcapp routines failed
load_lcapps
ERR
-24964,ERR_EXECUTE: error in program execution
768,/sapdb/LCA/db/bin/x_python /sapdb/LCA/db/env/lapps.py -R /sapdb/LCA/db -d LCA -u SUPERDBA,*
Installing APPS
Installing APPS
Traceback----
File "/sapdb/LCA/db/env/installib.py", line 401, in connectAndInstall
installRoutine (session, options)
File "/sapdb/LCA/db/env/lapps.py", line 34, in install
"APPS"
File "/sapdb/LCA/db/env/installib.py", line 163, in include
install (session, options)
File "/sapdb/LCA/db/env/APPS.py", line 36, in install
loaderCmd (session, 'USE USER %s %s' % (sapuser[0], sapuser[1]))
Command----
USE USER SAPLCA MANAGER
Error----
loader.LoaderError: [-25008] Logon failure; previous user's (SUPERDBA) connection was restored.
cannot finish instance update for "LCA"
checking catalog...
table SYSDBA.SYSCHECKCATALOGERRORS does not exist
registering liveCache application procedures...
registering lcapp routines failed
load_lcapps
ERR
-24964,ERR_EXECUTE: error in program execution
768,/sapdb/LCA/db/bin/x_python /sapdb/LCA/db/env/lapps.py -R /sapdb/LCA/db -d LCA -u SUPERDBA,*
Installing APPS
Installing APPS
Traceback----
File "/sapdb/LCA/db/env/installib.py", line 401, in connectAndInstall
installRoutine (session, options)
File "/sapdb/LCA/db/env/lapps.py", line 34, in install
"APPS"
File "/sapdb/LCA/db/env/installib.py", line 163, in include
install (session, options)
File "/sapdb/LCA/db/env/APPS.py", line 36, in install
loaderCmd (session, 'USE USER %s %s' % (sapuser[0], sapuser[1]))
Command----
USE USER SAPLCA MANAGER
Error----
loader.LoaderError: [-25008] Logon failure; previous user's (SUPERDBA) connection was restored.
SAP liveCache instance update exited abnormally at Tu, Feb 05, 2008 at 17:15:27Hi Rolland,
As you told is right, there was a problem in the password,
we changed that password and we have tested the DB connection in db59, this was ok. and we ran the command user_sap SAPLCA,<password>
this was ok.
After the registration has been succefully from LC10 ..
Thanks for your inputs,
Mahesh Chedde -
Does the Livecache SID always have to be LCA ?
We have installed APO Livecache with SID other than LCA and I'm being told that it has to be LCA always ?
Is this true ?
If it is, why is the install tool gives the option to pick a SID ?
Or is there a config setting in SAP to change this default setting ?
Thank youHello Ravi,
Please check the SAP Note No. 829963.
Please review the documents at service.sap.com/scm ->mySAP SCM Technology:
"mySAP SCM Technology" & "liveCache overview " .
In case of a new installation of the liveCache/LCA, you have to create the connections LCA/LDA/LEA
as described in the installation documentation for the SAP liveCache technology - using
Transaction LC10. For example, review the document at
service.sap.com/instguides -> mySAP Business Suite Applications->
mySAP SCM -> Using SAP SCM 5.0 Server->
"Installation - SAP liveCache Technology " in the section
"Common Post-Installation Activities" - "Setting Up the Connection to the liveCache Instance".
Please review the information at service.sap.com/liveCache ->Release Information ->
SAP LC/LCAPPS 5.0
You could run /n/sapapo/om13 -> checks & see the status for LCA & LDA & LEA
connections. If the connection is marked by the red semaphore => check errors in /nsm21.
You could run the test connection for LCA & LDA & LEA in db59 transaction and review the results.
Please open the OSS ticket to the component 'BC-DB-LVC' or 'BC-DB-LCA' if you have further
questions on this issue.
Thank you and best regards, Natalia Khlopina -
Good Morning
Im Michele. I have a problem with livecache.
I have installed SAP SCM 4.0 server.
I have installed SAPliveCacheServer for SAP SCM Server 4.0.
I have problem with initialization livecache istance.
I have executed the following instructions:
Setting up Connection to the liveCache Instance
Before checking the connection, you must initialize the liveCache instance using transaction
LC10.
1. Start the SAP SCM instances:
2. Log on to the SAP SCM System as user DDIC (production client).
3. Apply SAP Note 305634 RFC destination for global working on the liveCache
4. To maintain the liveCache connection in table DBCON, call transaction LC10.
The liveCache: Initial Screen appears.
5. In the Name of database connection field, enter LCA and then choose Integration.
6. Name the physical liveCache <LC_NAME>, the liveCache server <LC_HOST>, user data
and the corresponding passwords and make sure that Central Authentication is enabled.
8. Enter the administration report /SAPAPO/DELETE_LC_ANCHORS in field Follow-up
Procedures of section Initialize liveCache.
9. Save your entries.
10. To initialize the liveCache instance LCA:
a. Choose Back (F3). The liveCache: Initial Screen re-appears.
b. Enter LCA in the Name of database connection field.
c. Choose liveCache: Monitoring.
When I execute monitoring appear following message:
Name and Server LCA bw
DBMRFC Function: DBM_EXECUTE
Command: dbm_version
Error: DBM: Error
Return Code: -2
Error message: ERR_USRFAIL: user authorization failed
Please inform me how can I solve this problem
Thank you for your collaboration.
Best regards
Michele medagliaHello Michele,
we handle liveCache issues really only over OSS/CSS messages, so I will have to ask you to open such a message (for queue BC-DB-LVC).
From your problem description, you seem to have a problem with the user authorization. You could try to connect the following:
1. dbmcli -d <SID> -u <dbm-user>,<pwd> db_state
(The dbm-user normally is 'control'.)
2. Test the LCA connection in transaction DB59.
Please put any output of the above in the OSS message.
Kind regards,
Roland -
Recovery in MaxDB-LiveCache Error
Hi experts,
Thank you very much in advance.
I'm making some restores (restore a complete database backup) and recoveries (restore a complete data backup and apply logs backups) tests make in a SCM 4.10 with LiveCache KERNEL 7.5.0 BUILD 042-123-145-415 MaxDB DBMServer 7.5.0 Build 042-123-145-415 and DBMGui 7.5.00.12.
I'm going to describe step by step the tests that I did and the result
Marks steps
1.- In SCM I did marks SAP Menu/Demand Planning/Planning/Interactive Demand PlanningInteractive Demand Planning
2.- MARK1
3.- Execute a complete data backup
4.- MARK2
5.- Execute a log backup
The result of the next steps is that i can NOT see MARK2, I can NOT do a Recovery
I have 4 mediums defines:
- Two for Complete Data Backup, Device Type File and Overwrite Option checked.
- One for Log backup, Device Type File and Autolog Option checked
- One for Incremental Data, Device Type File.
Recovery Steps
1.- Complete data backup recovery
With Inizialization
I recovery from a specified backup from history, with check botton on complete data backup that I execute after mak 1 --> Recovery is OK I can see MARK1
2.-
a.- Without Inizialization
Recovery from a Complete data backup and apply transaction log backup
The only option that I have is to recovery from a medium i only can select one. --> I can NOT Recover
b.- With Inizialization
1.- Restore Last Backup (and mark Medium with Log Backup) -> I can't Recover
2.- Restore Last Backup (and mark Medium with Complete data backup) --> Recovery OK but see MARK1
3.- Restore a Specified backup from history --> I can NOT select a Log backup medium --> I can NOT recover
4.- Restore a medium --> I can only choose Complete data backup medium --> I can NOT recover
(As it has come to read all mail up here PRIZE!).
(PS: Not if the prize is worth reading the line above you re-read the mail)
For any aclaration please contact me.
Thank you very much.
Regards.Hello Alfonso,
A) What is the ticket number you created for SAP?
B) "The last tests I did I think I had checked all possible combinations( from last
backup, from a specified backup from history and from medium) without
restart until apply log backup and all these tests ended with error :
-24988 sql error db_activate RECOVER \"Fil113600\" DATA; -3004,
save/restore type mismatch. I selected to create a new medium when warning about medium definition appear."
1)Why you are not using the DBMGUI tool?
2) Review the recommended hints & notes above, see also note::
767598 Available documentation
==> For SAP liveCache documentation in English:
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
-> User Manual: SAP liveCache -> Database Administration -> recoveries
-> Database Manager CLI, Commands for Restoring <click>
-> Recovering a Database Instance with Initialization
SAP MAXDB documentation ::
http://help.sap.com/saphelp_nw04/helpdata/en/b1/78bb3ee5bf7173e10000000a114084/frameset.htm
-> Background Knowledge -> Logging ->Using Log Entries at Restart or Recovery
-> Background Knowledge -> High Availability
3) If you would like to use the dbmcli tool, try the following steps ::
I assumed ::
<data-medium> - you created the complete databackup using this medium.
<medium_name_log> :: LOGBACKUP - your log backup medium
" Creating a backup medium in the standby instance for importing the log backups from the original instance:
medium_put LOGBACKUP <path_log>\save.log FILE LOG "
Run your test scenario 1: .. Mark1 ..., complete databackup; Mark 2...; create the log backup .
Aftet that run::
dbmcli -d <SID> -u <dbm-user>,<pwd>
<enter>
dbmcli on <SID>>db_admin
dbmcli on <SID>>util_connect
dbmcli on <SID>>db_activate recover <data-medium> data
dbmcli on <SID>>db_restartinfo
< run this command to find out which log backup has to be imported first.
The Used Log Page line shows the next log page from which log entries have to be read.
Reviewed the buckup history >
dbmcli on <SID>>recover_start LOGBACKUP LOG <number of logbackup>
< Run "recover_replace LOGBACKUP <path_log>\save.log <number of logbackup +1>"
and so on, if you need to recover more as one log backups listed in backup history,
and created successfully. >
dbmcli on <SID>>recover_ignore
< after this command the liveCache will be in the ONLINE state >
dbmcli on <SID>>exit
4) For example I run the following steps in my local database::
dbmcli -d MAXDB1 -u control,control
dbmcli on MAXDB1>db_offline
OK
dbmcli on MAXDB1>medium_getall
OK
LOGBACKUP C:\sapdb\data\MAXDB1\backup\LOG FILE LOG 0 8
NO NO 20080226153620 20080226153620 NONE 0
INITIALBACKUP C:\sapdb\data\MAXDB1\backup\DATA1 FILE DATA 0
8 YES NO 20080226154106 20080226154106 NONE
0
dbmcli on MAXDB1>db_admin
OK
dbmcli on MAXDB1>util_connect
OK
dbmcli on MAXDB1>db_activate recover INITIALBACKUP data
OK
dbmcli on MAXDB1>db_restartinfo
< checked the results of "Used LOG Page" & Backup history file.
I had only one log backup created after I run the complete databackup =>>
dbmcli on MAXDB1>recover_start LOGBACKUP LOG 001
dbmcli on MAXDB1>recover_ignore
dbmcli on MAXDB1>db_state
OK
State
ONLINE
dbmcli on MAXDB1>exit
OK
Thank you and best regards, Natalia Khlopina -
Hi All,
I am going through the Post Steps of my LiveCache install manual. When I run transaction LC10 -> Enter DB Connection ->LiveCache Monitoring ->
Administration ->Operating, Administration ->Initialize LiveCache, it
gives me an error:
1/15/2008 12:23:27
Server: SAPDEVQA
Users: WETMORD
Logical Command: DBMRFC
Parameter: exec_lcinit -e unicode init
Name and Server : LCX - sapliv01
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit -e unicode init
Error : DBM Error
Return Code : -24909
Error Message : ERR_DBAUNKNOWN: Database system administ
My RFC's test successful.
A test in DB59 is successful.
LCA03 Gives me a DBIF_DSQL2_SQL_ERROR / CX_SY_NATIVE_SQL_ERROR
Has anyone experienced this?
Thanks,
DianaHi Diana,
the error basically says that the server does not recognize the given DB Administrator (SYSDBA).
I'd first check the credentials supplied in LC10. There you maintain user SAP<sid> for SQL access and a DBM user. Check the DBM user's password (e.g. by logging on through DBMGui). Also check that this user has sufficient rights to perform the initialization.
Best regards,
Dorothea
PS. The server version is shown in DBMGui, once you connected to the server. You can also display it by executing the following command from any host that has the MaxDB client software installed:
dbmcli -d <lc_name> -u <dbm_user>,<pwd> -n <lc_host> dbm_version
On i5/OS you'd have to execute the command from the PASE shell (CALL QP2TERM). -
Livecache lock server not accessible after system refresh
Hello,
I have performed a refresh of SCM + livecache from production to QA when starting the livacache from LC10 i get a message Livecache lock server not accessible. The livecache is started but when i look at the status there is a warning SQL access not possible.
I did an export of the config table and reimport and the server named are correctly defined for:
LCA
LDA
LEA
From the administration report of LCA
Initialize livecache
Follow-up Processing: /SAPAPO/DELETE_LC_ANCHORS
Start Livecache
Follow-up Processing: SLCA_LCK_SYNCHOWNERS
By running those program in se38
SLCA_LCK_SYNCHOWNERS (Livecache lock server not accessible)
SLCA_NON_LC_RELEVANT_CLIENT (Could not create a connection to livecache)
I checked and the relevant client is selected.
When i check the alert monitor from livecache - lca - connectivity - dbmrfc and native sql is in red with the following message:
SQL Statement Execution Instance Online, but no SQL access possible.
Also from SM21 i have errors saying Database error -4025 at CON
Let me know if you already encountered this issue and how it was resolved.
Thank you,
Martin Mayer
Edited by: Martin Mayer on Jan 4, 2012 4:02 PM
Edited by: Martin Mayer on Jan 4, 2012 4:07 PMI have checked that tread already the thing is when performing the check In db59, I´ve the LCA,LDA,LEA it fails.
1. Connect. test with "dbmcli db_state" Successful
2. Connect. test with command mode "dbmrfc db_state" Successful
3. Connect. test with session mode "dbmrfc db_state" Successful
4. Connect. test with "native SQL" ( LCA ) No connection
SQL Code: 4025
Edited by: Martin Mayer on Jan 4, 2012 5:26 PM -
Livecache not starting from lc10
Hi Folks,
I just did a system restore from our PRod to Test in our SCM system.
Followed the steps in notes 457425 and 877203 to complete the livecache restore, load_systabs, which was successfull, changed the standard livecache user/password for the target system, maintained integration data and tried to bring up the livecache in lc10, but it gives the familiar error
Server: z3gmvd09
Users:
Logical Command: DBMRFC
Parameter: exec_lcinit restart
Name and Server : L9T - z3gmvd09
DBMRFC Function : DBM_EXECUTE
Command : exec_lcinit restart
Error : DBM Error
Return Code : -24964
Error Message : ERR_EXECUTE: error in program execution
256,sap/lcinit L9T restart -uDBM , -uDBA , -uSQL ,
liveCache L9T (restart)
The liveCache state is OFFLINE
DBMServer 7.6.04 Build 015-123-189-221
Starting L9T into ADMIN
OK DBMServer 7.6.04 Build 015-123-189-221
Starting L9T into ONLINE
Creating liveCache application procedures
ERROR : liveCache L9T not restarted (see /sapdb/data/wrk/L9T/lcinit.log).
The lcinit.log
liveCache L9T (restart)
Tue Sep 22 09:31:19 SST 2009
installation path: /sapdb/L9T/db
operating system : HP-UX
OK State OFFLINE
DBMServer 7.6.04 Build 015-123-189-221
Starting L9T into ADMIN
OK
OK DBMServer 7.6.04 Build 015-123-189-221
Starting L9T into ONLINE
OK
Creating liveCache application procedures
ERR
-24964,ERR_EXECUTE: error in program execution
768,/sapdb/L9T/db/bin/x_python /sapdb/L9T/db/env/lapps.py -R /sapdb/L9T/db -d L9T -u superdba,*
Installing APPS
Installing APPS
Droping Procedures
SAPL9T
Creating Procedures
SAPL9T
dbpinstall
Traceback----
File "/sapdb/L9T/db/env/installib.py", line 412, in connectAndInstall
installRoutine (session, options)
File "/sapdb/L9T/db/env/lapps.py", line 34, in install
"APPS"
File "/sapdb/L9T/db/env/installib.py", line 163, in include
install (session, options)
File "/sapdb/L9T/db/env/APPS.py", line 61, in install
createPackage (session, package, libFilename)
File "/sapdb/L9T/db/env/APPS.py", line 126, in createPackage
stopIfSqlNotErr (session, -4024, 'DROP PACKAGE %s' % package)
Error----
unexpected Error -5001
ERROR : liveCache L9T not restarted (see /sapdb/data/wrk/L9T/lcinit.log).
Kindly Help.
Regards
E.VidyarthiHi Folks,
Issue resolved after initializing the livecache.
Vidyarthi
Maybe you are looking for
-
Statistical cost element (Value type 11) line item entry in CJI3
Dear all I am doing WBS settlement to AUC thr CJ88. Suppose actual cost on WBS is 100 rs. CJI3 report shows the balance to be settled to AUC. Now It is showing 100 rs balance. I carry out WBS settlement to AUC. Even though settlement has taken place
-
Group and display characteristics in a user friendly way
Hi all, We have a scenario where we have created a DOC type which we assigned to a class with several characteristics. The problem is that the characteristics are not disaplayed in a very user friendly way in tab "additinal data". Is there any custom
-
I ditched my old DLink router to get a shiny Linksys WRT54GX4, and got nothing but disconnects ever since. From reading these forums it seem to be a real issue with a lot of peoplewith this series of routers. Do I need to return this while I still ha
-
Hi Guys, We have reporting requirement with details from Material cost to General ledger. This is variance report with comparison of Divisional standard cost on material(split by cost components) to amount posted to general ledger. Flow of data Mater
-
Create a personnal number in PA40
Hi all,, In PA40 tcode we have personnel number(RP50G-PERNR)..so that number is unique...and in LFB1 table we have LIFNR and PERNR(Personnel Number) how are they linked... my problem is whenever a user creates a personnel number in PA40..it should be