Test Manager cannot install Test Agent on selected VMs (trying to create a new environment)

I am trying to create a new SCVMM environment.
I picked a bunch of VMs that are up and running.
I know the administrator credentials for these VMs (It's the same for all of the chosen VMs)
I have a test controller on my dev machine which is also up and running.
But I'm getting an error in the Verification step saying -
"Microsoft test manager cannot install test agent on these machines. Possible causes:
- Machines are not running or they are not available on the network.
- The File and Printer sharing exception is not enabled on the machines."
I have done the following -
1) Disabled firewalls on all the machines
2) Network Adapters on all the machines are connected (ON) and their drivers are up to date
3) Enabled file and printer sharing exceptions on all machines
Still getting the same error.
Any ideas?
Thanks a bunch!

That's probably a very well written description of what
you've done... it seemed refreshingly thorough. I'm on the verge of
a cold or something, with a slightly fuzzy brain, so what I thought
I read seemed to describe you've done just about everything
correctly, except for one thing (maybe another)... If you gave the
button the instance name stepin...
stepin.addEventListener(MouseEvent.MOUSE_DOWN,
mouseDownHandler);
and you could/should change that from MOUSE_DOWN to CLICK
If that's not the problem, then it is possible the issue
arises due to the tween. Be sure to have the button instance name
assigned at both ends of the tween (I'm assuming by classic tween
you mean a timeline tween). For some reason objects don't like to
give up some of their past life's properties when moving from one
frame to the next, so if the beginning of the tween doesn't have an
instance name, then it's likely that it stays that way when it
reaches the other end despite you assigning the name there.
PS - for the stepin button, if you haven't already done so,
you should open it for editing and draw a rectangle in the 4th
(Hit) frame that covers the entire area of the text. It will not be
visible, but will allow clicking between letters in the button...
making it easier to click on

Similar Messages

Cannot install itunes. error message i Tunes Library .itl created by newer version

i keep getting an error message when i try to install itunes. It says iTunes Library .itl created by newer version. It says to use 64 bit and that's what i'm doing but i keep getting the same message

Hello albee18520
Download this iTunes and install it to see it the error goes away.
iTunes 11.0.5 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Thanks for using Apple Support Communities.
Regards,
-Norm G.

The adobe application manager cannot install updates since it says that another installer is running

The adobe application manager cannot install updates since it says that another installer is running?? Another installer is not running, any way to fix this?

We can't know. You are not providing any system information or other details. Restart your system, make sure to sign in as admin, then try again.
Mylenium

HT4759 Please help me. My Apple id not be used in iCloud. After sign in, to iCloud, I have error massage: This Apple ID cannot be used to sign in to iCloud. Create a new Apple ID or sign in with a different one.

Please help me. My Apple id not be used in iCloud. After sign in, to iCloud, I have error massage: This Apple ID cannot be used to sign in to iCloud. Create a new Apple ID or sign in with a different one.

For whatever reasons, the "None" option is not always available to all users and I think it may be related to what country you live in. Short of contacting Apple to get it straightened out, if you haven't done anything with your new ID ye - you can create an Apple ID without a credit card and simply abandon the one that you just created.
This explains how you can creaet an ID without a credit card.
http://support.apple.com/kb/HT2534
The two big things that you have to remember for this to work are ... you have to sign out of your existing Apple ID .... Settings>Store>Apple ID - tap the ID and sign out. Then you have to try to download a free app to bring up the window that asks you to sign in or create an ID. Read the information on the website that I referenced above.
If you have not used the original Apple ID for anything yet, you can simply ignore it and use the new one - or like I said earlier - contact iTunes support and ask them to help you sort it out.
Here is a link to iTunes support. You can change the country in the bottom right corner of the screen.
http://www.apple.com/support/itunes/contact/

Error "The formula cannot refer to another column..." when trying to create a new subsite

Hi All,
I've been running into this error message when trying to create a new subsite
Sorry, something went wrong
The formula cannot refer to another column. Check the formula for spelling mistakes or update the formula to reference only this column.
Note everything was working fine before, this just started happening recently...
At first I thought it was because of my template, but as I have tried, I can't even create subsite using the templates provided by Sharepoint...
has anybody encountered similar problems recently?
Any help is apprieciated!
Fan Yang

Hi Fan,
If you create asubsite using the SharePoint default template, what error did you meet? Was it same with the error?
Which site template did you use for the parent site?
Please check whether you can create subsite at other site collection.
In addition, please trace the exact error by using Correlation ID.
Here are two great blogs for you to take a look at:
http://www.habaneroconsulting.com/insights/An-Even-Better-Way-to-Get-the-Real-SharePoint-Error#.UwrFamiwrwo
http://blog.credera.com/technology-insights/microsoft-solutions/troubleshooting-sharepoint-errors/
Best Regards,
Wendy
Wendy Li
TechNet Community Support

HT4718 i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

First of all, I have to ask, why to you "need" to install a fresh copy of OSX?
This may mean that your hard drive is failing, so hopefully you have a backup.
I'm assuming you were in your recovery partition when you did this.
I would, from the recovery partition, repair your hard drive and permissions.
When to Run First Aid in Mountain Lion's Disk Utility - For Dummies
And then try to create the partition again.
If that doesn't work, you have a few options:
Try a third party utility like DiskWarrior or TechTool which may be able to repair your hard drive:
DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair, Mac Disk Recovery, Mac Data Recovery or Techtool Pro 7
Try internet recovery, perhaps erase the entire hard drive and reinstall ML.
If nothing else works, then I'd replace the HD and start over.

Only visa payment option is highlighted when I am trying to create a new account. I have a MasterCard. When I click on MasterCard, it does not select

Only visa payment option is highlighted when I am trying to create a new account. I have a MasterCard. When I click on MasterCard, it does not select

I tried logging in through ITunes. It's still not selecting other payment options.

Is Rational Test Manager (or Rational Test Robot) certified?

Hello colleagues and SAP users,
I hope this is the right forum to ask.
Here in Italy, a client of ours is conducting its own internal test (that it wants us to evaluate) using the Rational Team Test suite, and more specifically Rational Test Manager to run the tests, and Rational Test Robot to log the results.
I would like to know it those programs are certified by SAP, as I didn't found them in any note.
More in general, I'd be very grateful if you could explain to me how to discover whether a given product is SAP-certified or not.
Thank you so much everybody
Marco Baiocco

Dear Marco,
In general, anyone can search for certified products on our online product directory at http://www.sap.com/softwarepartnerdir/. The directory can be browsed by company name or searched by product keyword/category.
For your specific query, Rational has only one product certified by SAP i.e. "Rational Test ERP Extension I". You can find more about the product at http://www50.sap.com/softwarepartnerdir/companyname/company.asp?partnerid=20932. This integration was certified in 1998/1999 and so is valid upto SAP R/3 4.5 only. For latest SAP releases, they need to come for re-certification.
We are not aware of relationship between "Rational Test ERP Extension I" and other products as mentioned by you.
Hope the above clarifies.
regards,
Imran Khan
SAP Integration and Certification center APA,
India

Cannot install zabbix-agent 1.8.8-1 from AUR

I get ==> ERROR: install file ((zabbix-agent.install)) does not exist.
How to fix this?
ty

You need to edit the PKGBUILD, it should read
install="zabbix-agent.install"
instead of
install=(zabbix-agent.install)
You can use the latest version, 1.8.10, if you like:
# Contributor: Enrico Morelli <[email protected]>
pkgname=zabbix-agent
pkgver=1.8.10
pkgrel=1
pkgdesc="Software for monitoring of your applications, network and servers."
arch=('i686' 'x86_64')
url="http://www.zabbix.com"
license=('GPL')
backup=('etc/zabbix/zabbix_agent.conf' 'etc/zabbix/zabbix_agentd.conf')
install="zabbix-agent.install"
source=(http://downloads.sourceforge.net/sourceforge/zabbix/zabbix-$pkgver.tar.gz zabbix_agent.conf zabbix_agentd.conf zabbix-agentd zabbix-agent.install)
md5sums=('7e89f80c1822787c0831f7c0dbefcd7b'
'9c20157a77b1ee4915265971f338fb41'
'9e2a08c7dc89dccf6f7b21a156360713'
'c1691c9feec203a051ad864227577c09'
'f36fddf29e295c2a7bd95ca1ce4320c7')
build() {
cd $startdir/src/zabbix-$pkgver
./configure --prefix=/usr --enable-agent
make || return 1
make DESTDIR=$startdir/pkg install
install -d -m0750 $startdir/pkg/var/run/zabbix $startdir/pkg/var/log/zabbix
install -d $startdir/pkg/etc/zabbix
install -D -m0640 $startdir/src/zabbix_agent.conf $startdir/pkg/etc/zabbix/zabbix_agent.conf
install -D -m0640 $startdir/src/zabbix_agentd.conf $startdir/pkg/etc/zabbix/zabbix_agentd.conf
install -D -m0755 $startdir/src/zabbix-agentd $startdir/pkg/etc/rc.d/zabbix-agentd
Builds and installs fine here.
Edit: Added backup array Idares asked for https://aur.archlinux.org/packages.php?ID=10343 and posted the updated PKGBUILD on the AUR page.
Last edited by karol (2012-01-31 18:02:55)

ICal possible bug: cannot select appointment, quit, or create a new one

Hello there,
I'm having this weird issue with iCal where after some time of inputting appointments and changing them around, one of the appointments seems to remain locked together with the mouse. In other words, no matter what I try to do I cannot because that one appointment keeps following my mouse. When I left click and don't move my mouse around, nothing happens. When I right click my mouse button, the column gets selected, but nothing else happens. When I left click and drag as if I wanted to create a new appointment somewhere, the one blocked appointment keeps popping up right there and the new appointment never gets created.
This is beyond my understanding so I'm asking for help. I have already trashed preferences and followed another post "how to completely reset ical" which was not entirely resolved, but I have deleted everything they listed there and I can't get rid of all the appointments. (This is quite ironic, because I've lost iCal databases quite a few times and was never able to get them back, and now I'm having trouble messing it up!)
I have also recorded my screen to give you a better visual to the blah blah above.
You can find it here: http://www.tigps.org/icalbug.mov [1MB file, 30 seconds]

redsteven1,
Thank you for replying. It is indeed a one-of-a-kind behavior. It has however fixed itself. It has not happened in a month now. I have not upgraded or otherwise changed anything on that computer.

„The system cannot find the file specified. (Exception from HRESULT: 0x80070002)" - Error when trying to create an new controlled GPO

Hello,
we were planning to Upgrade from AGPM 4.0 to AGPM 4.0 SP2. The new AGPM should be placed on a new server. Additionally we created a new service account as the password of the old service account has been lost. We granted the new service account Full Rights
in "Domain Delegeation" and "Product Delegation", then stopped the AGPM Service on the old server.
On the new server AGPM was installed using the new service account, then the service was stopped and the archive was copied rom the old to the new server. The customer could edit policies, but not deploy them. Because of this, we changed back to the old
server, but copied the folders that were changed on the new server to keep them up to date.
Now creating a controlled Group Policy from a template causes the error
„The system cannot find the file specified. (Exception from HRESULT: 0x80070002). We tried several templates and even created new ones but the problem persists.
The following things do work:
- editing a controlled policy
- renaming a controlled policy
- check in/check out of a policy
- set a uncontrolled policy to controlled (needs to grant the serviceaccount Full rights to the policy before)
- deletion of a controlled policy
- creating a template from a policy
Thank you in advance for your help.

0x80070002 usually means that the source could not be found or located. Make sue that the FQDN path to your templates is the correct one as well as your DNS is
properly configured.
sharing some manuals @: http://1drv.ms/1kk6u6j

HT1848 MY wife has an Iphone 4 and I have a 5. To date we haev used one apple is/account to manage music purchases. Recently we bought a Mac and created a new apple account for her. How do I synched her phone with new apple account?

MY wife has an Iphone 4 and I have a 5. To date we have used one apple account to manage music purchases/library. I updated ny phone to the new OS version and all her texting is showing up on my phone. I understand if i create an apple account for her I will not see her texts. Recently we bought a Mac and created a new apple account for her. How do I synched her phone with new apple account and get access to the music library under my account on the new MAC laptop before I update her phone to the new OS?
Going forward if I purchase music under my apple id and want her to have it on her device, how can I acheive that?

You can continue to share an Apple ID for purchases.
Sign her in to her new account here:
Settings > iCloud > Delete Account (Keep on Phone if you want to transfer contacts, calendars, etc...) then sign in with her new ID
Settings > Messages > Send & Receive > Apple ID > Sign out then in with new
Settings > FaceTime > Apple ID > Sign out then in with new
Use the same Apple ID here:
Settings > iTunes & App Stores > Apple ID

Is it possible to re-install itunes and sign in your account without creating a new one?

I cant access my itunes account so I am thinking of un-installing it and re-insalling it. Would I be able to sign in my account using my apple ID instead of creating a new account? thanks in advace

Hi there
The installation of iTunes has nothing to do with your iTunes account.
Are you unable to access your iTunes account because of a forgotten password? If so, then you can reset it here.
However, if you are unable to access your account for some other reason (disabled, etc), then you may need to contact the iTunes Store Support team
Good luck

Cannot see the List region in when trying to create it

Hi Guys,
I am trying to create the List region but cannot access it in my application when I try to create a region.
In Sample Database Application I can easiily do that,
http://i.imgur.com/26ASO.png
but in my application the option is missing.
http://i.imgur.com/oGiJQ.png
I've tried switching to 21. Scarlet theme but no luck as well. Unsure what I have to do to create a List region.
APEX 4.1.1

Hi,
First go to shared components and create a list entry. Now go to create wizard in any page and you should see the List item.

Extension Manager cannot install .XZP File. Why?

I have downloaded a set of Transitions from Filmimpact.net for Premiere Pro CS 5.5. It is a .XZP File
I Double clicked on it and Adobe Extension Manager CS 5.5 opened up.
I accepted the License agreement and it opend up.
I went to install These transitions and I get the following Message
"The Extension 'Transition Pack 1' does not contain valid signature. The extension will not be installed."
What does this mean and how can I fix it?
I want to install these Transitions in Premiere Pro CS 5.5?
Thanks in advance

Excerpt from:
http://www.filmimpact.net/index.php/faq/
What to do if the Adobe Extension Manager says:
"The extension cannot be installed"?
If the Adobe Extension Manager is giving such a message,
please update your Extension Manager.
You can update your Extension Manager by running Premiere Pro and open a project.
Then go to the Help-menu and select 'Updates'.
Or visit: http://www.adobe.com/downloads/updates/.
After updating the Extension Manager, the package will install just fine.
Duplicate post:
Extension Manager 5.5 won't install my transitions with .XZP file. Why?

Test Manager cannot install Test Agent on selected VMs (trying to create a new environment)

Similar Messages

Maybe you are looking for