Test node connection
I have a dual 2.5 G5ppc and I'm running FCS2 on it. I'm trying to encode 7-HDV quicktimes into 7-mpeg 2 files and matching ac3's using compressor. I started reading the qmaster directions and installed FCP, compressor, and qmaster on my MBPro. After completing all the install instructions it says don't install FCP on same network with only 1-license. So, am I screwed now? Can I still get a quickcluster to work. Is there anyway to test if these 2-machines are talking to one another? I see no data transfering over the network and grey dot in the menu bar qmaster icon. Hopefully I can get these files encoded overnight tonight and I thought the 2-machines might be a little faster. Any thoughts?
Hi, dont panic.. you're not screwed as you say. The fine print is "l+icence of FCP+".
*Apple Qmaster is what you need to install on your all service nodes.*
Just go do that. Its licenced to do that .. read the EULA.
I have this 8core plus 2-3 MACBOOPRO dual intels... all work as services nodes connected over ethernet using a GBE hub (cheap too).
Just make sure QMASTER is installed on these.
also for the sake of brevity and retyping the same advice, i would suggest you troll this forum and look for strings such as "NEVER COPY SOURCE" and "ethernet" etc for a solid setup of qmaster and compressor.
Oh and one last thing.
HDV is an MPEG2 LGOP codec. THis means that besides the non iFRAME format it is a bugger to encode on the fly.
I would suggest in future you import the HDV footage as APPLE PRORESS 422 code (or batch convert it in FCP) and work with that. THis wont visually improve anything but is MUCH EASIER to work with in FCP and even BETTER in COMPRESSOR. You will see the encodes just fly along. BAsically for a simple reason that it is already in an iFRAME only format.
I learned this when I had by HVR-Z1P sony camera (HDV). I ditched it for the HVX-200 and DVCPROHD .. never looking back
post your results.
w
Similar Messages
-
SQL Developer crashing when opening or testing a connection
SQL Developer closes abruptly when opening or testing a connection.
Here's what I do.
Open SQL Developer.
Create a connection:
Connection Name: [some string]
Username: [username]
Password: [password]
Save password: checked
Oracle tab:
Connection type: TNS
Connect Identifier: somedatabasename
Then I click on "Test" and the application immediately quits. No error messages. The app does the same thing if I save the connection and try to expand its node on the list of connections.
Mind you, if I use sqlplus like so:
[username]/[password]@somedatabasename
It connects just fine.
I captured the output from the command console after SQL Developer crashed:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Oracle\product\sqldeveloper\sqldeveloper\bin>sqldeveloper
_execv() failed, err=2Registered TimesTen
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x000000006d9f97c5, pid=5480, t
id=5840
# JRE version: 6.0_43-b01
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.14-b01 mixed mode windows-amd64
compressed oops)
# Problematic frame:
# V [jvm.dll+0x1397c5]
# An error report file with more information is saved as:
# C:\Oracle\product\sqldeveloper\sqldeveloper\bin\hs_err_pid5480.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
I am using:
sqldeveloper 3.2.20.09.87 (64-bit)
Java 1.6.0_43 (64-bit)
Windows 7 Enterprise SP1 (64-bit)
ODAC 11.2.0.3.20 x64
Please help!
Edited by: 993662 on Mar 13, 2013 9:10 AM@Jim:
Thanks for your suggestion. After several hours of experimenting, I've managed to fix my problem by copying the ojdbc6.jar from my ODAC installation and replacing the one in [sqldeveloper root]\jdbc\lib
To whomever has a similar issue: See my original post for what software I was using and their version numbers.
Edited by: FrostyZoob on Mar 14, 2013 8:11 AM -
Node connectivity,user existence:oracle and group existence:oinstall fail
hi all
i am trying to install Oracle Grid Infrastructure 11g R2 on Oracle Linux Enterprise edition
but while installing the following 3 errors are displaying.
1. node connectivity,
2. user existence:oracle
3. group existence:oinstall fail.
plz can anyone help me out how to resolve the above error?1. check connectivity to ALL nodes is OK, test ping, test ssh (should be passwordless) ,etc
2. check if the software owner is consistent across all nodes, check the owner id
3. check if the software group is consistent across all nodes, check the group id too
Cheers
FZheng
Edited by: FZheng on May 16, 2011 9:57 AM -
Error while testing ITS Connection
Hi all:
There is an error while testing ITS Connection, it says the 8000 port is a closed point by the firewall , but according to the
administrator of intranet, there is no firewall between ECC and Portal, I guess I should add port 8000 into service file ? I mean the file of Host and Service, am I right ?
An HTTP/S connection to http://10.180.80.171:8000 was not obtained successfully; this might be due to a closed port on the Firewall.thank you very much for your help. for update server's full name, may I put the mapping values into host file in the format of <ip address> <hostname.domain name> <hostname>, do you think it is OK?
in the second blog you suggest there is something about Server port(please refer to the following):
in the window machine, there should be an entry like sapms<SAP System ID> , can you please give me a full example:
let's say my system ID is EC1, so it would be sapmsEC1 8000/tcp, right ?
Here you have to enter the port of your application server. By default this is 80<SAP System ID>. But your basis administrator can modify this setting, thatu2019s why you should check it in the transaction SMICM (Goto -> Parameters -> Display). For example the IBSolution Development System Erinome the port is 8000.
You can also have a look into your services file on your machine. If you have a windows machine then the file exists e.g. here C:\WINDOWS\system32\drivers\etc\services
In this file you should search a entry like sapms<SAP System ID>.
Edited by: jingying Sony on May 24, 2010 4:41 PM -
Error while testing Driver connection Through The EnterPrise Manager
Hi -
I am using OAS 10.1.3v for my application.I am using both SQL Server 2000 JDBC driver and Oracle JDBC driver for my application. I am encountering problems due to SQL Server 2000 JDBC driver.
I tried testing for connectivity for SQL driver through the enterprise manager.(on the em console, inside home/administration/JDBC resources ). I am getting the following error :
Unable to create : com.microsoft.jdbc.sqlserver.SQLServerDriver
Missing class: com.microsoft.jdbc.sqlserver.SQLServerDriver Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils Loader: oc4j:10.1.3 Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/lib/oc4j-internal.jar Configuration: in META-INF/boot.xml in E:\product\10.1.3.1\OracleAS_1\j2ee\home\oc4j.jar This load was initiated at ascontrol.web.ascontrol:0.0.0 using the Class.forName() method. The missing class is available from the following locations: 1. Code-Source: /E:/product/10.1.3.1/OracleAS_1/j2ee/home/applib/mssqlserver.jar (from in /E:/product/10.1.3.1/OracleAS_1/j2ee/home/config/server.xml) This code-source is available in loader global.libraries:1.0. This shared-library can be imported by the "ascontrol" application
I tried adding mssqlserver.jar to the shared library.Still, i got the same error.
The connection which i am trying to test, has the following entry in the data-sources.xml :
<connection-pool name="BPELPM_CONNECTION_POOL1" max-connections="30">
<connection-factory factory-class="com.microsoft.jdbc.sqlserver.SQLServerDriver" user="sa" password="" url="jdbc:microsoft:sqlserver://localhost:1433;databaseName=WE411;selectMethod=cursor" commit-record-table-name=""/>
</connection-pool>
<managed-data-source connection-pool-name="BPELPM_CONNECTION_POOL1" jndi-name="jdbc/ExpressJDBCDataSource" name="ExpressJDBCDataSource"/>
I also tried with native-data-source option in the data-source.xml without a connection pool like -
<native-data-source
name="ExpressJDBCDataSource"
jndi-name="jdbc/ExpressJDBCDataSource"
description="Native DataSource"
data-source-class="com.microsoft.jdbc.sqlserver.SQLServerDataSource"
user="sa"
password=""
url="jdbc:microsoft:sqlserver://localhost:1433;databaseName=WE411 ;selectMethod=cursor ">
</native-data-source>
I am getting the same error as above.
Has anybody encountered a similiar problem ?
A related post that was posted by me is :
SQL Server Driver Problem in Oracle Application Server 10.1.3 data-sourcesthank you very much for your help. for update server's full name, may I put the mapping values into host file in the format of <ip address> <hostname.domain name> <hostname>, do you think it is OK?
in the second blog you suggest there is something about Server port(please refer to the following):
in the window machine, there should be an entry like sapms<SAP System ID> , can you please give me a full example:
let's say my system ID is EC1, so it would be sapmsEC1 8000/tcp, right ?
Here you have to enter the port of your application server. By default this is 80<SAP System ID>. But your basis administrator can modify this setting, thatu2019s why you should check it in the transaction SMICM (Goto -> Parameters -> Display). For example the IBSolution Development System Erinome the port is 8000.
You can also have a look into your services file on your machine. If you have a windows machine then the file exists e.g. here C:\WINDOWS\system32\drivers\etc\services
In this file you should search a entry like sapms<SAP System ID>.
Edited by: jingying Sony on May 24, 2010 4:41 PM -
Error "4" when trying to test my connection
Hi, please help me find out how to fix this error:
when i try to test the connection pops up an error message with only a number "4" in it, nothing else. what's this error message about and how do i fix it??
Thanx in advance!!!Hi,
unfortunately we cannot help without having connection to that database. It looks like you are trying to connect to Oracle 8 - not supported anymore.
Philip -
A network error when i tested the connection of a proxy user
Good evening
I 'd created a 3 appliances Filer system . Filer 1.1.0.653
The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
Every thing seems well. I could inport AD users, create filr users, and work ...
But when i want to create a NetFolder server, impossible to pass the connection test
Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
or
Name : Administrateur
or
Name = arcdom\Administrateur
Click on test connection => an network error occurs
I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
The Novell-FAMT is running. (I tried to restart it without succes)
Help .......
LP IrovetzOriginally Posted by LPIROVETZ
Good evening
I 'd created a 3 appliances Filer system . Filer 1.1.0.653
The Filr Apl is in DMZ and every ports are open between it and the 2 Windows boxes (AD and File Sharing)
Every thing seems well. I could inport AD users, create filr users, and work ...
But when i want to create a NetFolder server, impossible to pass the connection test
Name : Cn=Administrateur, cn=Users,dc=arcdom,dc=arcane-inf,dc=com (Administrateur because i'm French :=)
or
Name : Administrateur
or
Name = arcdom\Administrateur
Click on test connection => an network error occurs
I'd try with a "Filr" ADuser with same ACL as Administrateur, same ...
The Novell-FAMT is running. (I tried to restart it without succes)
Help .......
LP Irovetz
From the docu:
Click the Authentication tab, then specify the following information:
Proxy name and password: Specify the fully qualified, comma-delimited name and password for the proxy user used to access the OES, NetWare or Windows, server. (You can use the Browse icon next to the Proxy field to browse the LDAP directory for the proxy user that you want to use.)
IMPORTANT:Before you specify a proxy name and password for the Net Folder server, ensure that you review the information in Section 8.1.2, Planning the Net Folder Server Proxy User.
Test connection: Click this button to ensure that the path is accurate and that the credentials are valid, then click OK after the test succeeds.
Sometimes proxy users with the incorrect context pass this test. Ensure that the context for your proxy user is correct, as described in Expected Name Format for File Servers.
Authentication type: Select the authentication service for the file server that you are connecting to. This option corresponds with the Server type setting that you selected on the Configuration tab. If you selected OES or NetWare as the server type, only Novell NMAS is available as the authentication type. If you selected Windows as the server type, you can select either Kerberos, NTLM, or Auto detect as the authentication type. (Auto detect means that it tries authenticating with Kerberos first, and if that fails, authenticates with NTLM.)
NOTE:If Kerberos is selected as the authentication type, ensure that the DNS name server is able to resolve DNS queries for the Active Directory domains.
If the Kerberos port (port 88) is disabled on the Windows server, select NTLM as the authentication type.
So you should use comma delimited name for the username... Did you also try browsing for the user using the icon there?
Does is log any specific error message in /opt/novell/filr/apache-tomcat/logs/appserver.log file when you try to test the connection?
Thomas -
Error in Connection Test when connecting to R/3
Hi All,
Although I am able to connect to the R/3 server through the portal (SAP screen is visible and the transactions are running,) the Connection Test fails at the second step i.e. the Connector settings and User Mappings. I have checked these settings and they appear to be fine.
The Test connection results are as follows:
a> Retrieval of default aliases successful.
b> Connection Failed. Make sure User Mapping is set correctly and all connection properties are correct.
I am also unable to connect to the data source through the Visual Composer. Although the systems are visible, the Bapis are not retrieved. It returns the same error. I have even installed the Portal Add-ons for Visual Composer.
Please help.
Regards,
Deepak.Hi Guys,
Thanks to you all for the suggestions. Rajiv, the settings are as per your suggestions, yet its not working. Also, we are using UIDPW method to logon to the R/3 system. We are able to connect to the R/3 system through the portal and even the transactions are running. The problem is when we test the connection. It fails on step 2. The problem this is causing is that we cannot connect retrieve the data from the R/3 system through Visual Composer. We can connect to the portal thru it though and even the systems are available. But once we select the system and try to retrieve the BAPIs, it throws an error.
We are using EP6.0 SP9 and Visual Composer 6.0 Patch 5.
Regards,
Deepak -
Strange system screen - "System initiated. Nodes connected"
My phone was on the desk in front of me when it suddenly vibrated and a screen popped up saying "System initiated. Nodes connected", with a red "Dismiss" button underneath. I dismiss, reboot the phone, and after a few minutes it vibrated again, and the message reads "Awaiting player input from other nodes. Prepare to activate. Dismiss".
Anyone else get this? What does it mean?
My phone is Iphone 4 running ios 7.0.4.
Cheers!
OCHah, never mind, several people at work are getting the same messages, plus messages telleng them to -"stop talking, idiot"
-
How to test the connection between DSD backend and DSD connector
Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK. -
Can I use OCI driver to test database connection in JDeveloper9.0.3
When using JDeveloper 3.2.3, I can use oci8 driver to test the databse connection.
Then I want oci8 driver work in JDeveloper9.0.2 or JDeveloper 9.0.3. However, it cannot work.
(Note: but thin driver works fine)
First, I read the help file and setup ORACLE_HOME environment variable and install
OCI client driver ocijdbc9.dll on my compuetr. Then some exception is happening when I test again.
So I want to know, does anyone succeed in testing the connection via oci driver
and how to fix this problem.
Thanks a lot.Hi !
You MUST use jdbc library supplied with Oracle client ( so classes12.zip from $ORACLE_HOME/jdbc/lib ), not with JDeveloper - this one might be incopatible with oci native libraries.
I hope , this helps.
Michal -
How do You Test EMail Connectivity?
How do You Test EMail Connectivity?
Once you setup the mail gateway with an IP address, port, and domain name. How can you test email connectivity? How do you force the MARS Appliance to send an email?There is no "test e-mail connectivity" button/function. Essentially you need to configure inspection rules to notify you when they are fired by mars.
You will need to setup a user (preferably a non-admin account for testing) under "Management"-"user management"(if you haven't already done so) make sure to supply e-mail address.
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/initial/configuration/setup.html#wp1030836
Now you can "Configure a Rule to Send an Alert Action." the following link explains how to do this...An easy one would be the "System Rule: CS-MARS Login Failures - Non-Admin User" rule. Follow the instructions in the link below under the "Configure a Rule to Send an Alert Action" section to modify the rule mentioned above. Keep in mind that this rule only fires when there are login failures. Once you have modified this rule try logging into mars using the non-admin user with a bad password...you should get a e-mail from MARS.
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/user/guide/combo/alerts.html#wp1056101
Hope this helps.
Dustin Suko -
Testing the connectivity between Integration Directory& Integration Reposi
Hi Experts,
I am verifying the configured PI7.0 server,but i am not able to fine the Integration scenarios at the stage :
(Testing the connectivity between Integration Directory and
Integration Repositor)
In Integration Directory Configuration screen when i click on tools----
>Transfer Integration Scenario from Integration Repository.
it is displaying the dialog box with question mark sign,when i click this sign it is displaying another dialog box adn displaying as NO OBEJCTS FOUND.
So can any body help me in this matter. with detail procedure with steps in sequence order.
I appreciate the accurate and soon reply
Thanks in Advance
regards
Ken> Hi Barry ,
>
> Thanks for the Immediate reply.
> Could you pls send me how to create BPM in IR with
> step by step
> Then how to call that in ID.
>
> Please send me the detail procedure with steps.
>
> Thansks in Advance
>
> regards
> ken
You do not need to do that. Import the BASIS and ABAP Content, and these are already included.
Why work harder than you need to
If you want to create a BPM, then follow one of the how to guides:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40697f5e-088d-2910-6592-cefedf19860e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d46b9b90-0201-0010-ef92-9964c1bc98e1 -
More information on configuring node connections.
In the Netscape Calendar Server Admin Guide chapter on Managing a Node
Network, there is not sufficient information on configuring SNC connections.
The example provided shows "all:2" with no information on why 2 is a good number
for the example case. Other examples demonstrate increasing the number of connections
for specific nodes with no information on when this is appropriate.
<P>
We have configured our network with all:2, but we need documentation that details
how this number should be determined.
<p>
Two connections is the minimum in cases where there is one
node configured on each server. The unicwsd requires one connection for processing
of remote node requests and there should be at least one additional connection available
to be used by the clients.
<p>
Depending on how much traffic there is between nodes, two connections
might not be sufficient. The 'uninode -snc all' output should give you an
idea if there are not enough connections configured. An example of the output
follows:
<p>
uninode: connected to server1, node 10000
<br>Last reset: 29/6/99 13:00:51
PST8PDT
<br>----------------------------------------------------------------------------
<br><b>CONNECTION
EX CO AV US LOST RETRY QUEUE CANCEL CHECK GRANTED</b>
<br>----------------------------------------------------------------------------
<br>(10000)->server2(10001) 2
2 2 0
1
0
0
0
36
<br>(10000)->server3(10002) 2
2 2 1
0
0
0
5
126
<br>(10000)->server4(10003) 2
2 2 2
0
1 91
805
22
<br>(10000)->server5(10004) 2
2 2 0
0
0
0
0
181
<br>----------------------------------------------------------------------------
<p>In the example above, there are not enough connections available from
server1 to server4. <b>"US"</b> indicates that there were two connections
used at the time the uninode -snc all was run. <b>"QUEUE" </b>indicates that
there is one unieng process currently waiting for a free connection. <b>"CANCEL"
</b>means that there were x number of processes that did not get a connection, and
<b>"CHECK"</b> indicates the number of times a process had to retry before the request
for an snc connection was either granted or canceled. <b>LOST, QUEUE,
CANCEL, CHECK and GRANTED</b> are values that are reset when the unisncd
is shut down, or when 'uninode -reset' is run.
<p>
<b>Note:</b> In cases where there is more than
one node configured on one server, the node connections on that server going <b>to</b> the
other nodes are pooled. That means that any process on that server could use any snc
connection going to a node. In these cases the number of connections
configured could even be as low as all:1. Again, this depends on usage,
and might be subject to fine-tuning.Hi,
you have to enable this additional measurements by executing
x_cons <dbname> time enable
Kind regards
Holger -
Need to test db connectivity from Oracle 8.1.6 NT client
Our applications run on Windows NT servers and connect to the Oracle db server through an Oracle 8.1.6 NT Client. The Oracle db server is running Oracle 8.1.6.2 on HPUX 11.0. I am using commands in a batch file to restart the application services on the NT server when the database is brought down. Before starting the services back up I need to be able to make sure that the database is up. I was using the tnsping command to do this, but I found out that tnsping gives an 'OK' response when the listener is running and the database is down. I need something that works like tnsping, but tests for connectivity to the database, not just the listener.
I appreciate any help anyone can give me.
The following is the code from the batch file:
REM ******************************************************
REM Stop the TM Proc Mon Service
net stop TMProcMonSrvc
REM ******************************************************
:CHECKDB
REM Check the connectivity to the database
tnsping tm52ut
REM Check to see if the tnsping was successful (=0)
IF %ERRORLEVEL%==0 GOTO STARTTM
GOTO CHECKDB
REM ******************************************************
:STARTTM
REM Start the TM Proc Mon Service
net start TMProcMonSrvc
REM ******************************************************
:EXIT
exitUse sqlplus. Use a bogus username/password (if and watch out for the Invalid username error. If you get an invalid username/password error then the db is up else it is down. Suggestion: It would be much easier to write a wsh script that uses ADO to connect to the db. Batch files do not give you much control over the shell.
Maybe you are looking for
-
what should i do when the app store doesn't allow me to upgrade iPhoto after i upgraded my mac to yosemite?
-
How do I move where a drop-down hotspot's content displays?
I would like to know if there is an easy way to move where a drop-down hotspot's content displays. Here's an example: [+] 1) Do this, and make sure you include: this one that one those things I'm using the [+] as my hotspot before the step like I sh
-
Transfer playlists from my ipod classic to my computer
When I bought a new computer my library got transferred but not my playlists. I cannot drag or populate a new playlist on my computer from the playlist on my ipod. How can I do this?
-
Javascript for calculating End Date
I have two date fields "Start_Date" and "End_Date". User selects the start date. Then the form takes that date and adds 365 days. puts the result in the "End_Date" field. I have attempted a couple of scripts and none have worked. So I attempted to fi
-
EDL won't export in source mode
Hey, I'm trying to export an EDL in timecode order and it simply won't work. I select source mode, and it keeps giving it to me in master mode. Any thoughts?