Test page won't stop printing

I have a Hp psc 1315 all-in-one and it won't stop printing a test page everytime I turn it on.  I have had this printer for 5 years and it did this once before but I can't remember how I fixed it.  I followed the directions over and over and scanned the document after it printed and it still won't stop.  I'm getting sick of wasting ink and paper, any suggestions?? 

It's the alignment page that keeps printing. Check the link below. You need to scan the alignment page successfully so that it won't keep on printing it everytime you restart printer.
Cause
The product aligns the print cartridges every time at cartridge installation or replacement to ensure the highest-quality prints. The alignment page continues to print when the product is turned on or off, or when a print job is started, for any of the reasons below.
The alignment process is not complete.
The ink cartridges are not properly installed.
The ink cartridges need to be replaced.
The product needs to be serviced
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01577355&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...

Similar Messages

  • Laserjet 6P won't stop printing - prints a line of junk on each page -not connected to network or PC

    My HP Laserjet 6P won't stop printing.  It prints a few lines of symbols and characters at the top of each page.  The printer is not connected to a network or computer.  I tried shutting the printer off for a long time.   This started when I tried printing from a MAC to the printer, but now there is nothing connected to the printer.
    Any suggestions for resetting, etc.?   I don't know how to reset this printer so I haven't tried anything with the various buttons, etc.

    Disable the "Enable bidirectional support" in the P1102w Properties > Ports.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HP 6310 allinone won't stop printing deleted job

    Wireless network HP 6310 all in one printer,
    Our operating system is Windows 7.
    My husband sent a print job to the printer from the internet.  It printed multiple times and would not stop.  I tried the following to get it to stop printing:
    deleted the job from the queue
    cancelled the job at the printer
    turned the printer off and on
    unplugged the printer
    reinstalled a new version of the printer
    It still won't stop printing.
    Please help!

    Hi @dionysusthewino ,
    I see that the printer is printing out blank pages and won't stop. I would be happy to help you.
    Clear out the print queue on the computer.
    Then power cycle the printer.
    Restore the printer back to factory settings, if you are still having issues. If the printer is networked though, you will have to set it up again.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    If you need further assistance, please provide the results and the following information.
    What operating system are you using?
    How to Find the Windows Edition and Version on Your Computer.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How is the printer connected? (USB/Wireless)
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP 7520 won't stop printing

    Hi,
    I have an HP 7520 with two issues occurring at once: it won't stop printing and it won't connect to web services. This is a recent problem. 
    I've read through the various self-help posts, but I can't get the printer to stop printing (or the message screen to stay in menu mode) long enough to select the tools menu.
    All the pages keep printing with only one line, which reads "CONNECT xmpp008.hpeprint.com:80 HTTP/1.0".
    Any assistance would be greatly appreciated.
    KMK

    Hello  @klauskokott ,
    Welcome to the HP forums.
    I understand that your printer can't connect to the Web Services.
    I would like to help.
    It sounds like the printer is making a partial contention to the servers.
    Just enough of a connection to cause it to try and print the web services information page, but not enough to actually print the page and confirm the connection. This would be why is keeps trying to print the web services page, but you instead get the weird 'CONNECT xmpp008.hpeprint.com:80 HTTP/1.0'.
    I would first try resetting the network.
    Simply turn your printer and other network devices off.
    Unplug the power to the router for at least one minute.
    Plug the power back into the router and turn on your network devices.
    If that does not resolve the issue, try setting a manual DNS.
    The following reply by happytohelp01 has instructions for setting the manual DNS.
    It is for a 7510, but the process will be very similar.
    Efax 7510 still won't work after turning off/on ePrint several times
    Pleas let me know how things work out, or let me know if you need any further help.
    Aardvark1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

  • HP Laserjet P1102w won't stop printing

    I've just installed an HP Laserjet P1102w from the disk and it won't stop printing. I've disabled the bidirectional support and gotten rid of all other HP devices on my laptop but it still keeps going - just printing blank page after blank page. How can I stop this?

    Hi @dionysusthewino ,
    I see that the printer is printing out blank pages and won't stop. I would be happy to help you.
    Clear out the print queue on the computer.
    Then power cycle the printer.
    Restore the printer back to factory settings, if you are still having issues. If the printer is networked though, you will have to set it up again.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    If you need further assistance, please provide the results and the following information.
    What operating system are you using?
    How to Find the Windows Edition and Version on Your Computer.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    How is the printer connected? (USB/Wireless)
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • LaserJet Pro Scans, prints test page but will not print from a file

    I installed a LaserJet Pro200 MFP M276nw on my wife's Toshiba Satellite (Windows 7 64Bit OS) laptop yesterday (Printer is brand new out of the box). I installed with a wireless connection. It will print a test page and also scan wirelessly but will not print from a file i.e. a PDF. I installed it on my HP Probook this morning and it works fine. Any suggestions would be appreciated. The thought of paying Geek Squad 75 bucks rubs me the wrong way, especially since i just paid them 100 for an extended warranty. Thanks!

    Welcome to the HP Forums JBottensek,
    I see by your post that the printer won't print a PDF document from the one computer.
    I can help you with this issue.
    I have provided a document to go through the steps which should resolve this issue for not being able to print PDF documents. Cannot Print PDFs from Adobe Reader.
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • My 6310 All in One will print a test page but will not print from Publisher, Notepad, etc. WTH?

    My HP 6310 will print a test page fine, but will not print from Publisher, Notepad, etc. It goes thru the motions, but the image printed is almost not there. I have new ink cartridges in it. I have adjusted the print settings. STILL won't print properly. WTH???

    Hm, okay, thanks for getting back to me again!
    Try power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer and test print again.
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Printer won't stop printing.

    Asked for six copies of a one page document and won't stop even after pressing cancel printing.
    HP Officejet 6500
    Windows 7
    This question was solved.
    View Solution.

    Power off the pc and the printer, then load them both back up. This should hopefully clear it from memory if it is getting stuck somewhere.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • Hp all-in One remote prints test page but cannot find printer for anything else

    The HP All-in-One application can print test pages on my 8610 but when I go to any document or photo and try to print I get the following message "This Printer is not available." I have checked and have the latest version of the HP All-in-one Printer Remote application and the HP Print Service Plugin applications from the Google Play store. I am using a Samsung Galaxy 5 running Android 5.0. If I print a page from my laptop using wireless to this printer, I can see the All-in-One application tracking my printer status so I know it can see the printer.  The app on the phone will show the status under the printer name going from Ready to Unavailable to Ready as a document is printed and then finished. I am printing directly with local WIFI and am not using the ePrint feature.

    Hello , Welcome to the HP Forums!
    I hope you have a pleasant experience here. I'd like to help you with the issues you are having printing from your Samsung Galaxy S5 to your HP Officejet Pro 8610 e-All-in-One printer. Firstly, do you have the printer plugged directly into a wall outlet? The printer has a power moderator built in, so if it is plugged into a power surge bar or battery backup it may be getting inconsistent power. This can cause all kinds of firmware glitches (like the printer status not being broadcast properly). If that doesn't immediately resolve the issue, please follow the steps below: Network Power Reset: Let's leave the router on and unplug the power cable (NOTE: Do not reset the router.), then do the same with the printer, and shut down the computer. After a full minute, plug the router back in, wait for it to fully power up, then plug the printer back in and wait for the wireless light to become solid. Once both the router and printer are on, go ahead and turn the computer back on. Doing this will refresh the network connection. Restore Network Defaults and Reconnect:  1. On the front panel of the printer, touch your wireless icon at the top2. Select Settings.3. Select Restore Network Defaults.4. Restart your printer.5. Once it's booted back up, touch the wireless icon again.6. Select Settings.7. Select Wireless Setup Wizard and follow the prompts to enter your wireless network details.8. Try enabling the web services again. Another thing I would suggest, would be to download the HP ePrint app, rather than the All-in-One Remote. The Remote is moreso suited for scanning to your phone from your product, so I would suggest trying the ePrint app (you can download it from the Play Store). If the issue persists after these steps, please answer the following questions so I'm better able to assist: Are you able to print reliably from any other devices on your network?What brand and model of router are you using?What is it that you are trying to print? (ie. E-mail, photo, document)What app are you printing from? (Some Android apps have a direct printing feature)I look forward to hearing back from you and working towards a resolution to this issue!Have a great weekend.

  • To check ink levels I am told to print self test. page from cpu or printer.

    There is no way to print a test page on my" psc 2410 all in one" connected to a HP cpu with Win 7, 64 bit. Is there a workaround/

    The page here shows how to print a self-test report from the front panel, but it does not appear to have ink level information.  I have not used a PSC 2410 for years, but the following may give you what you need:  press the # and * buttons together on the printer.  The screen will say "Enter special key combination".  Press 1 2 3.  This should bring up a service menu.  Use the right arrow button repeatedly to bring up a "Special Reports" screen, OK, then right arrow to select "Cartridges" or some similar, then press OK. A page will print with ink level information shown about the middle of the page.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP Laserjet 400 M401n won't stop printing when more than 1 copy is specified

    I use this HP Laserjet printer on a network. It's brand new. I print from both Macbook Pro and / or Mac Pro running OS 10.9.5. Downloaded and installed latest HP printer driver.
    Problem: I can print 1 page just fine. But when I specify more than that, the printer will not stop printing copies for the number I specified. I have to press the cancel button to stop it. I have tried resetting the printer. No luck.

    I don't use spell catcher.
    I found a workaround posted elsewhere in the Apple discussion forum. When going through the printing dialog boxes, select Preview and print whatever number of pages I need from that window. It works fine so I'll use that method until a future Mac OS X update fixes the problem.
    The security update for OS X on 3-1-06 didn't fix the problem even after I repaired permissions.
    Thanks for responding.

  • I have a hppsc 1310 series that prints the test page, butr will not print the selected document.

    I have a hppsc 1310 series that prints the test page when turned on, but will not print the document I want to print.  It shows in STATUS as printing, but it does not print.  I keep getting a message to install software and I do this.  I then get a message software installed, but it still will not print.  This just started about five days ago. 

    Hello ausection29,
    Most likely what is printed when you turn on the PSC 1310 is an alignment page. To complete the alignment process you need to place this page on the scanner glass and press the Scan button. The top of the page should be towards the left of the printer I believe, double check this on your printer (there should be a small icon next to the scanner glass showing which way the paper should be placed on the glass).
    You can have a look at step 5 in this document for a video of how to do this:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01577355&cc=us&lc=en&dlc=en&product=374568&tmp_...

  • I have an iMac OS X.  I added it to a pc home network.  On the network I have a Canon MP810 printer.  I can get my iMac to print a test page, but it not print anything else.  How can I fix this problem?

    I have a iMac OS X.  I added it to a pc home network.  On the network I have a Canon MP810 printer.  I can print a test page on the printer sent from the iMac, but that is the only thing that can be printed from the iMac.  What do I need to do the solve this problem?

    Try installing the printer via System preferences using this driver:
    http://software.canon-europe.com/software/0025024.asp?model=

  • Print jobs won't stop printing...ever.

    Since upgrading to Leopard, I've got a problem with an old HP PSC 750 where the print queue seems to generate unlimited copies of one print job. I printed a three page document and went and made coffee and came back to what seemed to be +War and Peace+ in the output tray.
    I'm not sure I want to download a driver that's not been updated in a couple years, but I don't want to abandon this printer, which, although problematic over the years, is a cheap workhorse. I've not seen a lot of discussion of this problem on the web, is anybody familiar with this? Thanks in advance...

    I found the solution on this site : http://www.tomshardware.co.uk/forum/59912-29-1022n-printer-stop-printing
    You just have to uncheck the chekbox "Enable two-way communication" on the "Ports" tab of the printer properties and it works normally again !!!!

  • Awesome Airplanes - won't stop printing!

    I installed the Awesome Airplanes App on my HP OfficeJet 8600 and it has printed an airplane every day. I thought it was the children printing them but it is the app. I have removed the app but it still prints at least one a day.
    How can I stop it?
    Thanks 
    This question was solved.
    View Solution.

    Hi,
    Removing an app won't stop its subscription.
    Please follow the steps listed under Managing Scheduled Delivery Print Apps within the suspend or cancel sections to stop the scheduled delivery:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&cc=us&dlc=en&lc=en&product=4323659&tmp...
    As you already removed the app be sure to add it back, then follow the steps prior removing it.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for