Test results (info language)

hi guys.
i've a problem.
i've done a captivate test but the results are only in
english.
i'm italian and the e-learning-cd i've done is for italian
people so..
i'm disperate.
there's a way to translate the text results page in italian?
please help me..
thanks for disponibility and patience,
ivano
PS sorry for my english but i've a serious problem....
:(

Hi aibi,
You are working against yourself my friend. You posted the
issue, then less than two hours later posted the second sarcastic
message (above). Those of us who try to help others look over the
forums for posts with "0" replies first - so your second post
indicated your question had been answered, so we tend to ignore it.
In your case, one reason you aren't getting a lot of help is
because there isn't much to offer. Captivate is localized in
English, German, French, Japanese, Korean, and (some) Chinese, but
not Italian.
Open your "Captivate > Help" system and look in the table
of contents under "Creating Movies > Localizing Captivate
Movies". There are some tips there that might help, but in general,
your Italian users would benefit most from a Captivate version
specifically localized in Italian. Try putting in a request for
that - Adobe won't do it until you let them know it's needed, to
the "Request Form" is the way to go. It is located
at
this link right here.
Hope this helps!!

Similar Messages

Ridiculous Download Times on Reader Extended Docs (test results included)

I've been receiving complaints from clients about extreme download times (up to 30 minutes to view a 150MB file on a 20 mbps connection). So I decided to run some tests to see if this was being caused by a configuration issue, or something easy to resolve. (Testing results at the bottom of the page)
A little background info: Our core business utilizes pdf documents that have been enabled for shared review, reader extended, and then displayed within the browser. So I decided to take the same 50MB test file and create 4 versions of it. The original, one that was just reader extended, one that was just enabled for shared review, and one that was enabled for shared review AND reader extended. I then tested in 3 browsers, IE9, Firefox 3.6.17, and chrome 11.0. I used Reader X in all of the testing.
What I found out:
IE uses an active-x version of reader to display within the browser. This is the only browser in testing that used the active-x version and it does support streaming the file so that you can start working on the first page while the rest of the document is still downloading. BUT when a document is reader extended this feature does not work at all. You have to download the entire document before you can do anything. The viewer essentially freezes until it finishes downloading. Downloading in this psudo streaming method, it downloads MUCH slower. I'm talking 5 minutes to download a file that only takes 45 seconds if you click "Save Target As".
Firefox and Chrome both use the Plug-In version of the reader to display within the browser. This version does not support streaming of the file and instead forces you to download the entire file before viewing (even for non reader extended docs). The good news here is that on a Reader extended document, since it's not trying to stream the document it downloads much faster (more like 90 seconds for the same file that takes 45 seconds to download if you click "Save Target As").
I would tell our clients to use FF or Chrome, but that's in the hands of the IT departments, and most are using IE. As you can see the Active-X version of the viewer has by far the worst performance by far, and it's completely unbearable on files that are over 100 or 150MB. It would be nice if someone at Adobe could address this serious performance issue. I've even tried setting Fast Web View off and Speculative Downloading off, but the Active-X version still tries to display the first page and then stream the rest which results in a 3-5 minute download that should only take 45 seconds.

The only way it can get fixed is if you report it to Adobe. Posting it here may not be sufficient. There is an Acrobat feature request forum here and a bug report form here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Load Test Results - time series request data for by URL in VS2013

I am trying to figure out how to export and then analyze the results of a load test, but after the test is over it seems I cannot find the data for each individual request by url. This data shows during the load test itself, but after it is over it seems
as if that data is no longer accessible and all I can find are totals. The data that I want is under the "Page response time" graph on the graphs window during the test. I know this is not the response time for every single request and is probably
averaged, but that would suffice for the calculations I want to make.
I have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
My goal is to plot (probably in excel) each request url against the user load and analyze the slope of the response time averages to determine which requests scale the worst (and best). During the load test I can see this data and get a visual idea but when
it ends I cannot seem to find it to export.
A) Can this data be exported from within visual studio? Is there a setting required to make VS persist this data to the database? I have, from under Run Settings, the "Results" section "Timing Details Storage" set to "All individual
details" and the Storage Type set to "Database".
B) If this data isn't available from within VS, is it in any of the tables in the LoadTest2010 database where all of the summary data is stored?
Thanks
Luke

Hi Luke,
Since the load test is used to
simulate many users accessing a server at the same time, it is mainly verify a wev server load stress.
As you said that you want to find the data
for each individual request by url, I know that generally we can analyze the url request from the Summary like the following screen shot.
>>I
have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
I suggest you can try to add the
SQL Tracing Connect String in the Run Setting properties to trace the data.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/74ff1c3e-cdc5-403a-b82f-66fbd36b1cc2/sql-server-tracing-in-visual-studio-load-test?forum=vstest
In addition, you can try to create an excel to analyze the load test result, for more information:
http://msdn.microsoft.com/en-us/library/dd997707.aspx
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I want to write a program in LabView then pass the test results to teststand to check if it pass or fail without displaying the test stand program,

I want to write a program in LabView and create an execute but I want to be able to pass test results to test stand to find it the unit pass ar fail the test then save the data to a database. How would i go about it.

What's confusing is your statement that you want to do this "without display the test stand program". You can minimize the TestStand UI to the task bar but if you don't want TestStand to be running, how can TestStand evaluate the result. Explain a little more please.
In the message body of your post, you just say you want to create a LabVIEW exe and pass the results to TestStand. What I would recomend is that instead of an exe, you create a dll and use TestStand's DLL adapter to call it and return the results. TestStand will evaluate it and do the logging.

How to view the emma coverage test result when running local job

Hi Guys,
When using emma in DTE, we can obtain the code coverage test result. I submit a farm job, and can get a txt or html file on coverage report. But when I run it locally, the txt / html files is unavailable. I can only see a folder named coverage with coverage.emma & metadata.emma. So my question is how can I get the coverage report from it?
If I can use some command to generate report files, then what is it and how to run it.
Thanks

Hello Twenz
This forum is mainly (should not be only but it is) used for supporting Oracle Application Testing Suite (OATS) products.
I guess your question is not related to this solution at all. So maybe this is not really the right forum.
Good luck
JB

Generating a test result without a module

I have a basic question about generating a test result without calling a module in TestStand.
For example, I do a pair of read operations from a product and return the results to a pair of numeric local variables. Now I want to do a sequence pass/fail or numeric limit test based on these two values. The results are already available and I can do a function step to test a result, say from a basic math operation. But I can't create a pass/fail result from a function step. I've gotten around the issue by creating a dummy module that has no function other than to allow me use the expression builder to assign a result to one of the step result items, but this sure seems stupid.
What am I missing?
Thanks,
Dave
Solved!
Go to Solution.

Do it in the Pre-expression.
Use the <none> adapter as suggested and place down a Numeric Limit Test step. Then in the Pre-Expression put something like this:
Step.Result.Numeric = Locals.A - Locals.B
If you look at the Data Source tab you will see the variable which gets evaluated and compared against the limits.
In fact if you wanted to you could avoid the Pre-Expression and just put your calculation in the Data Source Expression:
Locals.A - Locals.B
You can set up the Limits on the Limits tab for that step.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

SCOM 2012 - Visual Studio Web Test - Cannot retrieve downloaded test results / share not configured

Hello-
I am trying to get my Visual Studio web test to work in SCOM 2012. I have configured the run-as account, and set the correct overrides for the Alert attachment file share discovery. I followed this guide to the T: http://technet.microsoft.com/en-us/library/jj899889.aspx
When I Select the site that I want to download the test result file for, The results pane shows the following error:
"The share does not seem to be configured in the Alert Attachment Management Pack"
When I attempt to download the result file without manually entering creds, it fails. When I do enter creds, in the "task history" it shows as succeeded, but I get no results. All subsequent automatic "Retrieve previously..." fail. In
the "task history", the "Run As" column is blank (unless I manually enter the credentials, which doesn't do me any good, anyway)
My "Alert Attachment" MP is inside another MP I created, along with the "System Center Global Service Monitor VS Web Test" MP and two other System Center MPs. This created MP is the one that my Alert Attachment Overrides are attached
to.
My Run-As account has the needed permissions to the file share, so I am lost as to why this isn't working. Any help would be greatly appreciated.

Have you followed the steps here to configure the share location http://technet.microsoft.com/en-us/library/jj899889.aspx ?

Can't print test results as "user"

Hi,
I have a program written in Labview 6.1 by another developer. This program runs on a
PC with Windows 2000 ver. 5.0 Bld 2195 SP 3. Even though this is a
stand alone test station and cannot ever be connected to the internet,
we have McAfee virus protection ver. 8.01 installed and running. Test
data is written to an Excel spreadsheet. The spreadsheet is then stored
on the hard drive and printed on a dedicated printer.
When the operator is
logged on as a "user" he can run the program but he cannot print or
store his test results. Also, I have noticed that all the print vi's on
the function palatte are missing. Even the Excel and Word ones
When
I log on as a "system admin". I can run the program, print and store the
test results. Also, all the print vi's on the function palatte are
present and functional. Including the Excel and Word vi's.
For security reasons, no test operator can be a system admin.
So, how can I have my test operator be a "user" or "power user" and not a "sys admin", run the test program, print and store the results.
Please
note, upgrading the system or software would take an act of God (i.e. permission
from the military and the customer and DSS.), so that is not an option.
I have also tried making the test operator a "power user" and he still cannot print his test results.
Thanks for your help.
Ken M
Sr. Test Engineer
CPI Inc.

Hi
The following KnowledgeBase maybe helpful in guiding you how to provide full control of National Instruments products to all users:
http://digital.ni.com/public.nsf/allkb/BB393E7B361E939886256EFD007AC591?OpenDocument
Let us know if this helps!
Mehak D.

How can I save test results to microsoft access database?

How can I save test results to microsoft access database?

Your best solution is to use the Database Connectivity Toolset. You can view the specifications and prices at the following web site:
LabVIEW Database Connectivity Toolset
http://sine.ni.com/apps/we/nioc.vp?cid=6429〈=US
If you have additional questions about this toolset, you can email us at [email protected]
Zvezdana S.
National Instruments

How to discard skipped test results in XML report generated from TestStand

Hello,
I'm generating XML report from TestStand. I have more than 100 test cases & user has the flexibility to select the test cases to execute or to skip.
Problem statement:
1. In Configure\report options there is filter expression to filter test results to be logged. However, this filter is disabled for XML report.
2. Is there a way to compress XML file using either encryption or any other methods?
I understand that there would be two methods ideally for my problem statement #1 above:
A. To have a workaround in reportgen_xml.seq to pragmatically log only executed test cases and discard skipped test results.
B. Modify stylesheet supplied by NI to discard skipped test results.
For problem statement #2 above:
I am able to encrypt the data before logging it to XML. But I don't know how to modify the stylesheet to decrypt the same using either public/ private encryption keys. Can anyone bring in more ideas here !!!
My preference would be to implement using #A above to reduce the XML file size which is ~4 MB will all test results (skipped + executed). If this is not possible my last option would be to implement using #B above
I would appreciate if someone can help me for my problem statement? I'm using TestStand 2010
Solved!
Go to Solution.

I have another solution and that is to actual discard the result before you get to the report stage.
You can do this by use of the Override Callback SequenceFilePostResultList and if Skipped then discard the result from ResultList.
Check out this link.
Regards
Ray Farmer

Would anyone please give me a test result of Oracle 9iFS

We want to build a content management system. We've already built a MIS and the data stored in a Oracle database . The data in the content management will be used by the MIS . would anyone please give us a test result of Oracle 9iFS. We want know the capability, reliability of 9iFS . It will be appreciated If anyone can give us some proposes.
thanks .

Thanks for replying. i've tried doing it with one square as a
movie clip symbol and then flipping that square over with the 3d
rotation tool and then over and over. but i'm having to draw other
squares on other layers to make up the rest of the square as it
gets created. is this the right way to do it? what would be the
simplest way? i know you said its just an animation, but how would
you create the animation?
Thanks

Build model - view test result - i have no ROC tab

Dear all,
When I build eg. a classification SVM (Lin.Reg, Naive Bayes)) model and view the test results, in that window I have only these tabs: Performance, Performance Matrix, Lift, Profit. I have no Roc tab. Do you know why? Before I used SQL Developer 3.2.09.30_x64 with this problem. Now I use SQL Developer 3.2.20.09.87_x64 with this problem. When I try to tune the SVM algoritm (so not let it automatic), there are only these tabs: Cost, Benefit, Lift, Profit. But not ROC tab :(((
When I use the old Oracle Data Miner software from 2011, version 11.1.0.3.0 (build 11705) connecting to the same database server (using the same account), and I build a classification SVM model, I have ROC curve.
Can anyone help me to solve this misterious problem?
Than you!!!

We don't have "preferred target value" during model building in the new data miner. However, you can use the Transform node to transform your target into 2 classes (preferred target value and others). You then use the output from the Transform node as input source for your model build.
Here is a process to transform your target into 2 classes:
- Create a Transform node
- In Transform node, select the target column, click "Add Transformation" icon on the toolbar
- In the Add Transform dialog, select "Custom" Binning Type, click "Generate Default Bins" button (accept default settings)
- In the "Custom bin values" listbox, remove the non-preferred target values (select the values and click the "Remove Transformation" icon on the toolbar)
- Now, you should have one preferred target value in the "Custom bin values" listbox, click OK to finish
You can now connect the Transform node to a Build node. In the Build node, select the transformed target (it should have the "_BIN" suffix in the name) as the Target for model build.
Hope this help!
Denny

Report Tab showing Cleanup Test results

We're running with TS 4.0 (VIs in LV 8.5). We've customized the Operator Interface so that the Execution View and Report View are contained in the same tab. Before now, we really didn't use the Cleanup section of the sequence file. However, as our test evolved, we realized the need to guarantee certain predictable shutdown. Anyway, when we run our tests (we have the report set to on-the-fly) the tests in Main show up in the execution tab and display pass/fail. When a subsequence is called, the execution tab lists those (sub)tests and their results, as expected. The problem is that we have a couple of things we do in Cleanup, and when the test ends, the execution tab displays the results of the things that were done in Cleanup. We'd like the test results from Main to show up at the end so that the user can see what passed/failed without having to scroll through the report. Is there a way to do this?

Hello mrbean,
I am not seeing the same behavior that you describe. The execution pointer should always follow the steps in the currently executing sequence. If your MainSequence cleanup step group does not call any subsequences, then the execution pointer should not leave the MainSequence. Furthermore, when I do place a subsequence in my cleanup step group, the execution pointer still returns to the MainSequence from which the subsequence was called once it is finished executing. So I have been unable to reproduce this issue.
However, if you simply want to disable tracing into the Cleanup step group, you can go to Configure > Station Options and uncheck the "Allow Tracing into Setup/Cleanup" option. I hope that helps.
Regards,
Marty H.
National Instruments

Import the test results and doors links back to doors with NI Requirement Gateway

Hi together,
I will try to explain my problem:
We are using TestStand, DOORS and the NI Requirement Gateway.
We created a test specification in DOORS, TestStand used the DOORS IDs to connect the TestSteps in Teststand with the requirements in DOORS.
TestStand runs the test and creates XML-results, the NIRG is able to import these XML-results back to DOORS and creates a new(!!!) DOORS module, parallel to the said test spec.
This module contains some attributes like the single test steps, the results (pass,fail, whatever, ...) but now I am missing a relationship between the DOORS test specification and these results of the XML file or better, the XML-import in the new DOORS Module.
We want to manage our test results only(!) in DOORS so it should be possible to link(!) automatically the results of the XML to the DOORS TestSpec cause we are able to transfer the DOORS-IDs or other attributes (i.e.. The "un"unique NI ID#") too!
in ASCII-art:
DOORS_TestSpec -> NI_TestStand -> NI_Result -> DOORS_Result <--------- with LINKS to the DOORS_TestSpec!!!!!!!!!
Next Step is the DOORS Analyze Tool but we need the links to follow them and to show us the results.
Would be nice to know if somebody else knows the problem or perhaps someone has an other solution. Thanks for your time!
Greet

Regarding your statement "We will generate a chunk of XML-Results, so we are not able to link all the requirements by hand", are you concerned about having to update the path to the XML files each time you run the test? In this case, I would recommend creating a directory to store only the most recent report (the report path can be modified in the TestStand report options), and set the XML report project in Requirements Gateway to point to this directory. In your TestStand sequence, you could call code which moves the previous report file into a backup location so that only the newest file is in the specified directory. THis would prevent you from needing to modify the Requirements Gateway project to access the latest report; reanalyzing would reload the project with the new file. The traceability information will therefore always be up to date, and you can see that the DOORS requirements are being covered by the test results.
I agree that there is not really a good solution for importing the XML reports into DOORS, but I think you can acheive the result you are looking for using the report files directly.
Al B.
Staff Software Engineer - TestStand
CTA/CLD

AVK test results

I am new to Using AVK for my JSP web Application.
My Environment:
jdk1.4
Struts 1.2
hibernate3
OC4J 10g (9.0.4)
SQL server2000
LDAP
Plum tree portal.
I am new to using AVK.
I need to generate AVK test results for my Customer requirement.
Where Can i get information ?
What are jars i need to download ?
Raghu

Ideally, I'd like to find a test plan and/or results from the test plan. I've found reference in the Java platform specification indicating that it
"satisfies all testing requirements available from Sun relating to the most recently published version of the Specification six (6) months prior to any release of the clean room implementation or upgrade thereto..."
but I have not found what the testing requirements are that have been satisfied. Any ideas?
Many Thanks,
-E

Test results (info language)

Similar Messages

Maybe you are looking for