Test RFC connection for Logical port

Hi,
I've created a new Proxy class in my development by consuming the WSDL file and attached it to a package.
Also i have created Logical port based on the WSDL file in SOAMANAGER. But when I test the RFC connection which gets automatically created
I get message u2018Create failed: Argument not foundu2019, If any one has experienced this problem please guide me.
Thanks,
Ganesh

Hi Bhaskar
Kindly refer the SAP Note with RFC error
1906868 - Transaction program not registered error happened during connection test of Java Idoc adapter
1989478 - IDoc_AAE 'Program XI_IDOC_DEFAULT_PID not registered'
Regards
Sriram

Similar Messages

  • Couldn't create jco client connection for logical system

    Dear Experts,
    we are facing a strange issue in our custom webdynpro java application, few of our portal users are getting the "couldn't create jco client connection for logical system" for Model Data JCO Destination. below are details
    1. portal version 7.02 SP14 (we have recently updated to SP14 from SP02-- is this is causing the issue ?)
         1.1. updated the NWDI track with SP14 SCA files as well as added latest WD Runtime SCA file deployed the applications to Production also.
    2. above said exception is inconsistent and happening for only few users
    3. ping and test of jco destinations are successfull in content administration as well as in SLD, destinations were added in the SLD system.
    4. cleared the JCO ARFC meta data cache in webdynpro console
    5. jco destinations are configured using uid/pwd, configured user is not locked active and tested in the backend by logging in with the same user.
    6. restarted the portal server
    even though, we are getting the above said exception for few of portal users randomly.
    Please help me on this ASAP, as i am not getting any further help on this.
    Thanks,
    Ram.

    Hello Ram,
    Check the JCo Pool Configuration settings of your JCO Destination. This message normally comes when the maximum connections has been reached. Increase the "Maximum Connections" to some number depending on the usage. A good habit is to disconnect the jco connection after executing the same in your webdynpro code if you don't want it to be synchronous.
    <ModelName>.modelInstance().disconnectIfAlive()
    Hope this helps.
    Regards
    Vijay

  • No trusted/login RFC connection for system BCP in TA SMSY

    Hi,
    i got this error  Early Watch Report  for only production System.
    No trusted/login RFC connection for system BCP in TA SMSY
    Amit

    HI,
    I hope the error message is straight forward.
    Please Check whether you have established RFC connections to the BPC system and the same is avaiable under the RFC connections in TRXn SMSY-Your system -.Test the connections in SM59-BPCs-> READ and Trusted RFCs.
    If its not present, Generate the RFCs again manually.
    Hope this helps.
    Revert for any issues.
    Thanks,
    Jagan
    Edited by: jagadheeshan govindasamy on Oct 9, 2009 3:24 PM

  • WHY do we set up a RFC connection for workflows

    Guys please tell me why do we setup a RFC connection for workflows.
    I am getting few dumps for function module IDOC_ERROR_WORKFLOW_START_R in transsactional RFC connection.
    Looks like it is because of temporary disconnection.
    i want to know what is the relationship of RFC with wirkflows.
    Thanks in advance

    Quoting text in automatic WF customizing transaction (SWU3):
    Function
    The workflow runtime system always executes its tRFC (transactional RFC) calls on the logical destination WORKFLOW_LOCAL_xxx (xxx stands for the three-digit number of the client).
    The workflow runtime system only operates within one client. The naming for the logical destination guarantees that these names are unique across the system.
    If you carry out this activity automatically, the logical RFC destination WORKFLOW_LOCAL_xxx is created (if it does not already exist). The user WF-BATCH (system user) is assigned to this destination.
    If you belong to the SUPER user group, and the WF-BATCH user does not exist, it is created and automatically gets the maximum authorization of the current user (SY-UNAME). This function is to be performed once by a user who belongs to the SUPER user group.
    If you perform this activity manually, you can maintain another system user and another password.
    In SWU3 you can configure RFC destination.

  • How to setup RFC Connection for SAPOSS?

    Dear Experts,
    I tried to setup the RFC connection for SAPOSS based on the following settings, but when I test connection, it failed.
    Target system : OSS
    Msg. Server : ... ( this where I stuck which I'm not sure what to fill in)
    Group : EWA
    Client : 001
    User : OSS_RFC
    Password : CPIC
    Does anyone know the right settings?
    Regards,
    Abraham

    Hi all,
    Do I really need to setup our own SAProuter if our firewall doesn't block any outbound IP address?
    I've tried the following settings in OSS1 but still failed to connect.
    SAProuter at SAP :-
    Name : sapserv3 ( or sapserv7 or sapserv2)
    IP address : 147.204.2.5   (or 194.39.134.35 or 194.39.131.34)
    Instance no : 99
    SAPNet Message Server
    Name : oss001
    DB Name : 001
    Instance No : 01
    I left the SAProuter1 and SAProuter2 (at customer site) blank.
    Did I miss out anything?

  • Configuring RFC connections for load balancing.

    Hi ,
    We have the following landscape for our systems.
    The database is installed on z/os , db2 (mainframe). The central services( SCS and ASCS) are also on the mainframe. So the message server is on mainframe.
    The CI is on AIX and The DI is on AIX.
    We have Logon groups configured and load balancing Configured and is RFC enabled.
    1) When we connect to SAP using the SAPGUI and  the portal connection is made to either CI or DI depending upon the best response times.  Now recently we are running the mercury load testing, all the users are connecting to DI. Why are the users connecting to DI even though we have load balancing?
    2) I have a system with SID BP0, with one CI and one DI. The logon group is BP0 and the message server name is cyrix. Now I have other another system EP0. I have created a RFC connection from EP0 to BP0. In SM59 I have selected the load balancing option, and provide the message server name, SID and logon group name. The connection does not work. If I connect directly to the CI or DI the connection works. Please tell me how can I configure load balancing for RFC connections.
    Thanks
    Manmath.

    Dear 917996,
    There are two types of load balancing:
    - Client-side load balancing (setting up the tnsnames.ora on client side). More information here (http://ggsig.blogspot.co.uk/2012/04/client-side-
    load-balancing-in-oracle.html). Very good video produced my friend Igor Melnikov is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/client/clientloadbalance_viewlet_swf.html)
    -Server-side load balancing (remote_listener and setting service parameter clb_goal). Very good Igor Melnikov's video is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/server/serverloadbalance_viewlet_swf.html).
    I have read about client side and server side load balancing. By editing tnsnames.ora I have enabled client side load balancing which is suppose to select listeners at random. then why does it only go to second node?Could you please show your tnsnames.ora on client?
    Please can anyone help me to configure server side load balancing with SCAN. I have read many many post but couldn't find a clear answer.Based on your output (remote_listener string cmbtrnrac-scan:1521) you have already configured the server side load balancing.
    SQL> show parameter listener
    NAME TYPE VALUE
    listener_networks string
    local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
    DRESS=(PROTOCOL=TCP)(HOST=10.1
    7.67.214)(PORT=1521))))
    remote_listener string cmbtrnrac-scan:1521How many SCANs do you use? Do you use DNS?
    regards,
    Gennady

  • Short dump (CALL_FUNCTION_FORMAT_NOT_SUP) when testing RFC connection

    Hello!
    I'm trying to test a RFC connection through SM59, but I'm getting the following short dump: CALL_FUNCTION_FORMAT_NOT_SUP (RFC data format not supported).
    This RFC will connect to Biztalk, and this dump started occurring when Biztalk changed their codepage from 1100 to 4102.
    On my SAP system the codepage is set to 1100.
    There is no option to set the system as Unicode or non-Unicode on SM59, since I don't have the "Special Options" tab (My release is 4.6C).
    How can I make this connection even with the different codepages?
    Thanks in advance!

    Hello Pedro
    This is the PI forum, which is for PI technical issues. This post is not related to PI.
    P.S. Please also familiarise yourself with the forum Rules of Engagement - https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement. Please do not Cross post.
    Regards
    Mark Smyth
    XI/PI Moderator

  • Error 'Program not registered' while testing RFC connection PI_RFC

    Hi Basis Experts
    I am having problems while testing an RFC connection PI_RFC in one of our PI quality system.
    Here is the Error log
    Logon Connection Error
    Error when opening an RFC connection
    ERROR: program PI_RFC not registered
    LOCATION: SAP-Gateway on host bp1xeuaa202 / sapgw01
    DETAIL: TP PI_RFC not registered
    Details COMPONENT: SAP-Gateway
    COUNTER: 15866
    MODULE: gwr3cpic.c
    Details RETURN CODE: 679
    We tried restarting the JCO-RFC provider service in VA,also tried restarting the Gateway service, tried registering the RFC using below command
    rfcexec u2013g PI_RFC -a bp1xeuaa202 -x sapgw01
    rfcexec u2013D PI_RFC
    the command didnt gave any output also in SMGW tcode we didnt get the entry(PI_RFC) under system type as registered server.
    Also we tried changing the Gateway hostname and service name in SM59.
    Still we are facing the same issue, can anyone please help us in resolving this issue.
    Regards
    Syed

    Hi,
    It seems to like problem with your program is not registered.  As suggested by spantaleoni, you can go through.
    Here Program Id  must be case sensitive.  Once again check with your program Id.
    And, you have to register your program id in Visual Administrator.
    Goto  Visual Administrator:
    In that Select Cluster>Server>Services-->JCo RFC Provider
    Then enter the Program Id and gw host & service.
    Hope this helps to you.
    Regards,
    P.Rajesh

  • Clarification on RFC connections for MM-SUS set up in SRM

    Hi All,
    I am stuck with replication of vendor from R/3 to SUS. I have made the RFC connections as mentioned below
    R/3 Side: R/3 to XI - Type 3
    SUS Side: SUS to R/3 - Type 3
                    SUS to XI (LCRSAPRFC) - Type T
                    SUS to XI (SAPSLDAPI) - Type T
                    SUS to XI - Type H
    XI Side: XI to R/3 - Type 3
                XI to SUS (LCRSAPRFC) - Type T
                XI to SUS (SAPSLDAPI)  -  Type T
    Can you please confirm whether these connections are sufficient for MM-SUS set up.
    Thanks in advance!
    Regards,
    Ram
    Edited by: Ram K on Sep 21, 2008 10:16 AM

    Hi Ram,
    Vendor Master data R/3 to SRM
    1.Find the vendor group in  SRM
    TC= PPOMV_BBP
    Ex:- VG Id= 50000041
    2.TC= BBPGETVD     in  SRM
    Give the following parameters
    System(R/3), Vendor no in R/3, Pur. Org, Object ID:50000041
    Then  click on start transfer.
    3.TC= SLG1   Check the Q if have strucked
    4.Check the vendor no in SRM System use TC= PPOMV_BBP
    Note:-
    R/3 & SRM number range shoul be same
    R/3 internal/External No. range equal to SRM External number, Then only replicated
    If u need more details pls contact to my Id bvnvrao yahoo.com.
    I will forward screen shot document.
    I think it will help.
    WR
    Rao

  • No of RFC connections for a period of time

    Dear all,
    Is there any possibility to find the number of RFC connections hit to a server  over a certain period of time?
    I could not find any more details using AL08 since it gives the cumulative users rather than specific user type.
    Regards,
    Kumar
    Edited by: Anees Qureshy on Jun 16, 2010 1:43 PM

    Ya i have checked under that location.
    But It will give the total no of calls that have been made.So if we assume 20 calls made,then im sure it does not imply that 20 connections have been made.
    We have enabled a max of 2000 connections at any time.
    But the number it is showing is in lakhs..I guess that is no of cumulative rfc calls made.
    I still wait for a suitable reply.

  • Dynamically define target address for logical ports (NW'04)

    Hello,
    when developing a web-service client using standalone proxy, you have to define the target address of a Web Service in the property-page for the Logical Port.
    We have the following problem. If, for any reason, the URL of the Web Service changes (i.e. the hostname or the port),  we have to rebuild the whole project and then redeploy the project.
    Is there a way to change this URL dynamically by java-code?
    Thanks in advance,
    Jarle

    Hi,
    You can get Server name Dynamically. You follow the below steps.
    1. Create a HTTP Destination in visual administrator which stores the server name and port.
    2. Access this variable in your controller init method and build your web service url with server name and port and use _setEndPoint() method
    String prefixURL = "http://";
    // your Service Address...remove the first part from service url.
    String serviceURL = "/TestService/Config1?style=document";
    DestinationService dstService = (DestinationService) obj;
    Destination destination = dstService.getDestination("HTTP","ApplicationServer");
    Properties destprop = destination.getDestinationProperties();
    HTTPDestination httpDestination = (HTTPDestination) destination;
    String serverName = httpDestination.getUrl();
    prefixURL = prefixURL + serverName;
    String testURL = prefixURL + serviceURL;
    Request<Obj> testReq = new Request<Obj>();
    testReq._setEndPoint(testURL);
    You need to import below files into your project.
    import com.sap.security.core.server.destinations.api.Destination;
    import com.sap.security.core.server.destinations.api.DestinationService;
    import com.sap.security.core.server.destinations.api.HTTPDestination;
    import java.net.HttpURLConnection;
    import java.util.Properties
    hope it solved your problem.
    Regards,
    Sridhar

  • RFC Connection for HR

    Hi,
    I'm trying to create a rfc connection between hr client and custimizing client for other modules. but is SALE when I'm trying to distribute my distribution model I always face this error:
    "name or password is incorrect".
    I changed the RFC password and my communication user many times but it didn't work. would you please tell me what is the problem?

    Create an 8 character long password which is all in UPPER CASE letters and change the user type to SYSTEM.
    Does that work?
    Cheers,
    Julius
    ps: see RZ11 param: login/password_downwards_compatibility for background to why I am asking.
    Edited by: Julius Bussche on May 31, 2011 5:02 PM

  • How  to create and test HTTP connection for proxy

    HI
    Can anybody help me by providing step by step guide for how to create a HTTP connection for inbound abap proxy?
    How i will get sure that connection is working properly?
    Thanks
    Debraj

    Hi Debraj,
       You should be able to do that in SM59 of the XI Box.
    Create the connection under "HTTP Connections to R/3 System".
    Provide the Target Host IP Address.Service Number and Path Prefix.
    Select the logon procedure as SAP Standard.
    SSL Inactive.
    Provide Logon details.
    Regards,
    Ravi

  • RFC connection for nonSAP system

    Hi all
    i want to send and receive data from b/w SAP and NON-SAP systems. plz tell me which type of RFC connection i will use.
    Regard
    Imran Khan

    Imran,
    Check the attached link.
    [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a]
    Manoj

  • Playing DVDs in 5.1 With Firewire Audio Interface Connected for Logic Pro

    This is exactly the same q as asked by plantwebguy in July 06, link
    http://discussions.apple.com/message.jspa?messageID=2696970#2696970...
    I'm struggling to get an answer on this anywhere... I have Logic Pro running 5.1 Surround Mixes on a g5, using a Metric Halo Mobile IO Firewire audio interface - its 6 analog outs are connected to a M Audio LX4 powered surround system. It all works great - until... the problem is when I need to listen to DVDs with 5.1 soundtracks (for reference), or even HD trailers (with 5.1 soundtracks). With the Mobile IO selected as audio interface, DVDs only play in stereo. I think this is because the 5.1 soundtrack is only output thru the optical out - but connecting the optical out to the Mobile IO and selecting 'Digital out' on the g5 brings silence.. Im told this is because the MIO's optical in wont decode 5.1. I'm interested to hear from anyone with a Pro Audio interface - like a MOTU etc - who needs to switch between mixing their own music in 5.1 and then listening to DVDs in 5.1.. I cant be the first, surely?
    Plantwebguy said he solved his issue with VLC. Do we know if VLC willl decode 5.1 and then output it to the Interface via Firewire? I've searched the net for a Pro Audio interface with (1) 6 analog outs & mic inputs etc (2) firewire connection and (3) optical in that reads AC3/5.1 etc (rather than just ADAT).... nada. Sorry to be long-winded but I cant get a solution anywhere..
    Thanks in advance
    g5 dual 2.5   Mac OS X (10.3.9)   Logic Pro/Mobile IO 2882 FW Interface/M Audio LX4

    This is exactly the same q as asked by plantwebguy in July 06, link
    http://discussions.apple.com/message.jspa?messageID=2696970#2696970...
    I'm struggling to get an answer on this anywhere... I have Logic Pro running 5.1 Surround Mixes on a g5, using a Metric Halo Mobile IO Firewire audio interface - its 6 analog outs are connected to a M Audio LX4 powered surround system. It all works great - until... the problem is when I need to listen to DVDs with 5.1 soundtracks (for reference), or even HD trailers (with 5.1 soundtracks). With the Mobile IO selected as audio interface, DVDs only play in stereo. I think this is because the 5.1 soundtrack is only output thru the optical out - but connecting the optical out to the Mobile IO and selecting 'Digital out' on the g5 brings silence.. Im told this is because the MIO's optical in wont decode 5.1. I'm interested to hear from anyone with a Pro Audio interface - like a MOTU etc - who needs to switch between mixing their own music in 5.1 and then listening to DVDs in 5.1.. I cant be the first, surely?
    Plantwebguy said he solved his issue with VLC. Do we know if VLC willl decode 5.1 and then output it to the Interface via Firewire? I've searched the net for a Pro Audio interface with (1) 6 analog outs & mic inputs etc (2) firewire connection and (3) optical in that reads AC3/5.1 etc (rather than just ADAT).... nada. Sorry to be long-winded but I cant get a solution anywhere..
    Thanks in advance
    g5 dual 2.5   Mac OS X (10.3.9)   Logic Pro/Mobile IO 2882 FW Interface/M Audio LX4

Maybe you are looking for