Test voice error

hi
i can't get successful test after enable enterprise voice for users on lync server 2013
i put picture
it's just busy tone not free

Are you using the basic client or the full client? The Lync basic client won't work for enterprise voice.
Beyond that, the user you're attempting to call says "presence unknown". Is that user another Lync user? Are they logged on? It looks like they're not a member of your Lync organization or federation to their firm isn't allowed.
Can you give more details on who you're trying to call?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
thanks about your reply
i think i use basic lync
how can i download the full client ?
as below picture from http://windowspbx.blogspot.com/
it test like me :
Trying Out the Audio Test Service
please see:
http://lh6.ggpht.com/-qk0DcHBnBW4/UCaNN98ownI/AAAAAAAAEzg/42gZpg9cV0k/s1600-h/phone-dialpad-and-testvoice%25255B4%25255D.png

Similar Messages

VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction id in results:

Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
Satish

Hi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error faced during installation of EHP3 on ECC 6.0 (Test Import Error) ?

Hi
i am facing an error while installing EHP3 on ECC 6.0
my current level :
SAP_ABA 700 0017
SAP_BASIS 700 0017
SAP_BW 700 0019
SAP_AP 700 0013
all other SAP_APPL , ERECRUIT are on 600 level more then 11
I downloaded the ENH3 FOR ERP6.0 content from market place
I loaded them with SAINT and continued , i removed all other warnings of support package in SAINT by taking appropriate support packages .
Problem: I am getting Test Import errors
1)For EAAPL(60301) ---> error code 08
Function API_RE_CD_GET_CASHFLOW_CN (RECD_API_CONDITION 01) does not fit into the existing function group ((RECD_BAPI_CONDITION 21
2)FOR FI-CA(60301) --->error code 08
Function FKK_DB_LOCK_SINGLE (FKKLOCK_DB 04) does not fit into the existing function group ((FKLOCK 11
3)For ISM (60301) -
> error code 08
Function ISM_SD_RETURN_RELEASE (JKSDRETURN03 01) does not fit into the existing function group ((JKSDRETURN100 01

Hi
Yes i have checked the previous SPS levels of these components its 13 and i used 603 SP level 02 of these components for installation as per told by you while defining a installation queue as well as support package selection in SAINT but still am getting the error. In SAINT i even got in remarks filed a message that "extended queue is consistent and matchesthe selected target packages". I am getting "TEST IMPORT ERROR ...."
I am getting return code 08 for components listed below in TEST IMPORT phase :-
1) EA-APL (603 SP level 01)
2) FI-CA (603 SP level 01)
3) ISM (603 SP level 01)
4) EA-DFPS (603 SP level 01 & 02)
Please help me out and suggest something.

Runtime error in F-48( Test environment error in SAPLGLT0 program )

Hi Expert,
i am getting the run time error while run the F-48 tcode in program "SAPLGLT0" and include "LGLT0FER"
if i do the Extended program check of SAPLGLT0 program i am getting
Test environment error like : The namespace of the program SAPLGLT0 has the setting "C" and cannot be tested A pssible cause for this is that an SAP program is being checked in a customer System
How to correct that ? is any sap note available ?
Thanks and Regards,
GR

Hi,
Please check the following notes
Note 1242773 - Getting short dump when doing GR for combined requisitions
Note 1047059 - Run time error in migo/Goods receipt
Regards,
Jigar

Test voice-translation rule not working properly

Hi all,
I have a 15.4(1T) image I'm trying to test a voice tranlation-rule on.
If I put in a number that doesn't match, it tells me so. However, if I test a string that does match, I get no results at all.
I know the rule works as this is from our production phone system.
voice translation-rule 1
rule 1 /^9\([2-9]..[2-9]......\)/ /\1/
CTHA_2901#test voice translation-rule 1 2488900
2488900 Didn't match with any of rules
CTHA_2901#test voice translation-rule 1 92488900
CTHA_2901#
CTHA_2901#
Has anyone run across this? Perhaps I'm doing something wrong, or there's a software bug in this image?
Thanks,
Brian

Hi Jaime,
I hadn't, and that certainly does work. I guess I thought I'd see a no-match message in that scenario too, but never tried it. Thanks!

I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

I ran hardware test and error 4MOT/1/40000003: HDD-1322 came up. Anyone know what this is?

Hi guys,
I have a similar problem, the numbers at the end of the error code change a bit, when i do the apple hardware test again ( I have an imac of early 2008, 2,66 GH). I have 2 GB Ram now, after one week ago one of the 2GB-Ram sticks "died") In fact, it was working quite much, then suddenly (i bought imac in june 2009) the ram stick was broken. The apple-support center told me its probably not a problem, but did not tell me what the error code means. I have apple-care for 3 years, its a luck i did it, so they will take it and check carefully, but just after i insisted on the error. It seems they do not want to tell u what that could be....
Do u guys think the ram-stick was broken because the imac was too hot???

How to integrate Silverlight tests into a CI (continuous integration) process. MSTest.exe gives unable to load test container error.

Hi,
I am getting "unable to load test container error", while loading test dll. This test dll uses silverlights test framework.
The details of error is as below,
Unable to load the test container 'SLTest.dll' or one of its dependencies.
Error details:
System.IO.FileNotFoundException: Could not load file or assembly 'System.Windows, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies. The system cannot find the file specified
System.IO.FileNotFoundException: Could not load file or assembly 'System, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies. The system cannot find the file specified.
Can any one tell why I am getting this error?
I would like to run tests which uses silverlight test frame work. One of my solution contains tests which uses silverlight test framework and NUnit or MSTest.
How to run tests which uses silverlight test framework in TFS Build?
Vivek.

I'm getting the same issue:
Error details: System.IO.FileNotFoundException: Could not load file or assembly 'System.Windows,
Version=5.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e' or one of its dependencies. The system cannot find the file specified
On running TeamCity with my unit tests.
On the server I have silverlight v5.0 installed. System.Windows.dll is present there.
But still I'm getting this error. What I'm doing wrong?
Viviek, have you solved your issue?

I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve. Thanks

I have a problem, from system test says: Error 4mem/61/400000000:0x8444fb98, I know how you can solve.

If you have Apple Care for that computer, give them a call: Apple's Customer Support - in the US, (800) 767-2775
If you're not sure how to handle the situation, consider walking your MB into the nearest Apple Store and asking someone there to take a look, etc.
Good luck in any case.

Crash on start up. Ran hardwear test got error code: 4SNS/1/40000000:IC0C-65.828

Have Mac Pro 13" crash on start up. I ran hardwear test got error code: 4SNS/1/40000000:IC0C-65.828
Mac is only 1.5 yrs old and out of warranty. I searched the net and found code= CPU0 problem but don't know if accurate. If CPU problem I guess a new logic board? I am pretty shocked I have a hardwear prob like this. Any ideas?

no one knows exactly what those codes mean except Apple techs. A guide/key explaining those codes has not been made public. While others in here can make vague gueses as to what it may be, you really need to bring your mac to an Apple store or AASP for evaluation.

[svn:osmf:] 14994: Fix 10.1 unit test compile errors.

Revision: 14994
Revision: 14994
Author:   [email protected]
Date:     2010-03-24 11:35:55 -0700 (Wed, 24 Mar 2010)
Log Message:
Fix 10.1 unit test compile errors. Remove unused constants.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataNamespaces.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/f4mClasses/TestManifestParser.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/TestNetStreamUtils.as

Revision: 14994
Revision: 14994
Author:   [email protected]
Date:     2010-03-24 11:35:55 -0700 (Wed, 24 Mar 2010)
Log Message:
Fix 10.1 unit test compile errors. Remove unused constants.
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/metadata/MetadataNamespaces.as
    osmf/trunk/framework/OSMFTest/org/osmf/elements/f4mClasses/TestManifestParser.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/TestNetStreamUtils.as

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS?

I SCREWD UP AND SHUT DOWN MY MAC WHEN IT WAS IN THE PRIVLEDGES STAGE BECAUSE MY PLUG-INS FOR AFTER EFFECTS WASNT WORKING, WHEN I SHUT IT DOWN AND TRIED TO START IT BACK UP, MY MAC KEPT RESTARTING, TEST-RAN-ERROR..4MOT/1/40000003:HDD-14444? WAT IS THIS? WAT DO I DO TO GET MY MAC BACK RUNNING

I believe you've posted this multiple times. Once is all that's needed. Also, please don't use all caps. Aside from the fact it means you're shouting it's also harder to read than mixed case.
The error means a bad fan motor or the HDD has failed. In your case it's the latter. You can try the following:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

Cache connectivity test showing errors in RWB

Hi,
cacheconnectivity test shows error as below in RWB.
MSG_REPOSITORY_ERRORConnection to system null using application null lost. Detailed information: Error accessing "http://<host>:<port>/rep/conntest/int?" with user "PIRWBUSER". Response code is 401, response message is "Unauthorized"
regards,
bobby

Hi Prakasu,
thanks for your quick reply,
i have Checked the user name(PIRWBUSER) and password in exchange profile(RuntimeWorkbench) and also the host name ,port,instance number all are fine. still i am getting the problem.
regards,
bobby

Failed to start e-TEST agent: error starting agent: \ne-TEST process ...

Hi,
wihout changing the version or so we suddenly we experience the following error at status page (although the monitored web-page is fine):
Current alert: Failed to start e-TEST agent: error starting agent: \ne-TEST process has not established socket in 30 seconds.
Any ideas?
Thanks in advance

Hi emposadi,
It looks like the e-Load server is having trouble communicating with the agent. Are you running the load test using an agent on the same machine or remote machine? You might want to see if a process has grabbed a port that the server communicates with the agent on. I would reboot the machines in question, shut down the Empirix Application Server and verify that ports 1099 and 9001 are not in use. Those are the ports that e-Load uses to communicate with the agent.
-GateCity_QA

[Test(expects="Error")] not functioning as expected

When testing against implementation code which is expected to throw an exception the test fails even when the expected exception is thrown.
I broke this test down into a very simple example to help illustrate the issue:
public class ExpectsExampleTest
    [Test(expects="Error")]
    public function testExpects():void
        throw new Error();
The above code result in the following error:
6/11/2009 23:23:39.519 [WARN] FlexUnit4 There was 1 failure:
6/11/2009 23:23:39.522 [WARN] FlexUnit4 1 tests::ExpectsExampleTest.testExpects Error
Not sure if I am missing something or not, however the implementation appears to be correct.
Thanks,
Eric

mlabriola wrote:
Eric,
there was a bug surrounding this issue. Latest bits in SVN should have it corrected. There was a difference between the docs and code.
if you get the latest, it will work as is, or, you can change the word expects to expected and it will likely work in yours.
It the new version it accepts either,
Mike
thanks mike, you're right

Hp pavillion dv6 3300seQuick test (303) errorFull test(305) error?How to fix?

how to fix these error without replacing the laptop???
303 and 305 error..
normaly my computer get slow
when i restart my laptop.. i get an hard disk issue..
while checking the hard disk test..
i got 2 error
QUICK test (303)error
FULL test (305) error
how to fix them????

Hi,
Both the 303 and 305 errors would indicate that your Hard Drive is failing and will need to be replaced - this is also consistent with the issues you describe.
If your notebook is still under warranty, contact HP and arrange to have a replacement drive sent out to you.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Test voice error

Similar Messages

Maybe you are looking for