Test voice-translation rule not working properly

Hi all,
I have a 15.4(1T) image I'm trying to test a voice tranlation-rule on.
If I put in a number that doesn't match, it tells me so. However, if I test a string that does match, I get no results at all.
I know the rule works as this is from our production phone system.
voice translation-rule 1
rule 1 /^9\([2-9]..[2-9]......\)/ /\1/
CTHA_2901#test voice translation-rule 1 2488900
2488900 Didn't match with any of rules
CTHA_2901#test voice translation-rule 1 92488900
CTHA_2901#
CTHA_2901#
Has anyone run across this? Perhaps I'm doing something wrong, or there's a software bug in this image?
Thanks,
Brian

Hi Jaime,
I hadn't, and that certainly does work. I guess I thought I'd see a no-match message in that scenario too, but never tried it. Thanks!

Similar Messages

Voice Memos is not working properly

This App's been behaving strange...
That "bar" where we supposed to drag foward and rewind in the recorded memo isnt working anymore. So when I want to rewind I cant, I need to stop, and start all over again from the beginning.
And now, It just doesnt record anything!
It shows that it is recording but when I stop to listen, nothing hasnt recorded.
I restarted the phone but it didnt change anything
Does anyone experienced this same problems?

same here ... iPhone 3gs/32 gigs ram/ios 4.3.1 ...
the app doesn't seem to work any more, and hasn't for some time:
"buttons" are unresponsive, or they appear to respond, but don't perform their function ... erratic behavior ...
very disappointing as this has gone on for some time ...
We appear not to be the only ones ...
Anyone with a solution?
Thanks

Voice control does not work properly on iphone 4

I found some bugs in voice control in the iphone 4. Here are the bugs I found:
*When you tell voice control to call someone, it calls someone in your contacts instead of the person you want to call
*Sometimes, when you tell voice control to dial a number, it sometimes gets the number wrong
*Sometimes when you try to call someone in your contacts, it says "No match found." and you have to call that person again hoping this wouldn't happen again
That's all I found for now but 1 question. Will you please tell apple these bugs so they will make an update fixing these bugs?

Except the first one, these are not Apple specific problems. Every voice recognition application has the same.
The first one is expected behaviour. iPhone only knows about contacts in your Address Book. There are other services that provide you with a broader call-by-name directory, but that's not an iPhone function. You can use iPhone to call those services.

Condition in Approval Procedure Rule in ChaRM not working properly

Hi experts,
We are on 7.1 SP8.
We have Z-partners defined and included those in the Approval Procedure too. In order to fill the approval procedure steps with the default partner, we defined a rule policy.
For example step ZMCR000001 needs to be filled with BPE by default.
This works fine.
But when we want to overwrite the default value with another value, the default is always put back over the manual entered value.
Also manually added process steps get that same value.
It looks as if the last step of the condition is not working properly (i.e. the check to see if the approver is already filled).
Can somebody tell me how we can get manually entered values in there?

Hi ,
You can play with User status, add to condition in which user status you dont wont this to be triggered.
Example add "And User status equal ZMCR Created":
On staus created you get automatic approval determination with default partner ID's
Now on Validation the rule will not be triggered and your manually added values saved as is.
Rg Dan.

My visual voice mail does not work,but I have properly set it up, how do I fix this?

My visual voice mail does not work,but I have properly set it up, how do I fix this?

Visual Voicemail is all carrier side, funny enough. Apple can't really do anything to troubleshoot it because it's outside of their realm. Be sure to contact your cellular carrier for further assistance

Have Mail Version 4.6 (1085), is not working properly not receiving mail. I sent a test message to my computer; it took over an hour delivering.

Have Mail Version 4.6 (1085), is not working properly not receiving mail. I sent a test message to my computer; it took over an hour delivering. There are multiple copies of messages appearing in the recovered folder
My computer is a MacBook, version osx 10.6.8
All help appreciated
<E-mail Edited by Host>

Hi vin rouge,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/TS3276
Configuring Mail for your email account
http://support.apple.com/kb/HT1277
Cheers,
- Judy

Need help on voice translation rules

Hi all,
I have small CME setup and i want to translate the 111 to 09821444335. If some one dial 111 its convert to 09821444335.
so following rule i configured in router but its not working. pls help
voice translation-rule 1
rule 1 /1111/ /09821444335/
voice translation-profile profile1
translate calling 1
dial-peer voice 2 pots
description OUTGOING-CALLS
translation-profile outgoing profile1
destination-pattern 0T
port 0/0/0:15
Thanx in advance..

Hi
In addition to the perfect explanasion of Mr/Andrew. Please find the below to configure the num-exp and ignore translation rule.
num-exp 111 09821444335
dial-peer voice 10 pots
destination-pattern 111
port 0/0/0:15
Num-exp happens BEFORE dial-peer matching, they would have a higher precedence than any translation profiles applied to your dial-peers .
Cisco gateway will take the digits a user dialed and apply any matching number-expansions before looking to match outbound dial-peers so the number-expansion takes priority
Thank you
please rate all useful information

The head phone jack on my brand new iPod touch 5th generation is not working properly

The head phone jack on my brand new iPod touch 5th generation is not working properly. It has sound without the headphones in but when I plug them in it has no sound, it's low, or poppy. I had only used my apple supplied headphones once before and it worked fine. I know it's not the headphones because I tried them on my girlfriends phone and they worked fine.

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
Try the following to rule out a software problem
- Reset the iOS device. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar

Iphone 4 mic is not working properly

Hello,
Well my i droped my phone 4 and the back has been broken, well i replaced it with a new one, the result is that
My iphone camera was broken and i tried to replace it with a new one but the problem persist, and the mic is not working properly
That when i receive a phone call or when i call someone my iphone mic work sometimes and stop others and i discovered that by tapping on
The back of the iphone it work, and meanwhile i can use the mic for recording voice memos or for using viber or any software using the mic
And it works very good, only in phone calls it stop working and by tapping on the back it work again,
Anyone can help me???
Thanks guys

Thanks for the reply but yes it does record voice memo because there are 2 mics 1 on top and 1 on bottom.
the one that is using for making phone calls is the bottom one.Therefore top 1 is good but bottom is not.

Remote not working properly with Apple TV...sporadic fuctioning

Hello,
I have no idea what caused this to happen, but both my remotes (I have one from my MacBook Pro and one from my AppleTV) seem to not work properly with AppleTV. It sometimes works but it is extremely frustrating as it only registers about 1 out of every 10-20 clicks then continues to remember the previous clicks therefore making it essentially impossible to select the desired menu/item. Basically it just seems like it's out of control!
I tested whether it was the remote or AppleTV that was causing the problem by running Front Row on my MacBook Pro and both remotes seem to navigate Front Row perfectly fine. They both act the same way with AppleTV, whether they are paired or not. It seems as though something happened with my AppleTV. This problem occurred randomly, with no specific cause I can think of.
Please let me know if any of you have ever experienced this problem and what your solution was, if any!
I have tried restoring to factory conditions, resetting settings, ran diagnostics, unplugged and replugged it, and nothing seems to be working!
Oh, and I just replaced the battery on one and have tried swapping batteries, etc.
HELP PLEASE!
Thank you,
Travis

The menus have never been as responsive as they used to since the 2.0 update in my opinion - basically AppleTV seems to cache/buffer remote click if it is busy or perhaps waiting for something to stream from itunes, and when resources become available it suddenly executes all command rapidly which makes it behave wildly in menus.
Usually happens I find after restarting the unit or if streaming drives have gone in to power saving modes and there's a delay while they wake up to feed the AppleTV.

Anchor links to accordion panels not working properly across browsers

Hi everyone,
I need some help to figure out why my anchor links to specific accordion panels on another page are not working properly across browsers.
I have a Map page which has tooltips on mouseover on the site markers. 15 of the tooltips have "Click here for information" anchor links (although only 14 are currently linked) which, in theory, would take you to the Nurseries page where the specified accordion panel would be opened with the nursery entry appearing at the top of the new browser window.
Here are the links to the Map page and Nurseries page, respectively:
www.alegriadesignstudio.com/RFRI/map_v6.html
www.alegriadesignstudio.com/RFRI/nurseries_v6.html
I've tested the anchor links on IE, Firefox, Google Chrome, and Safari, and have received varying results. In most cases, the anchor links worked perfectly on two of the browsers, while on the other browsers, the correct accordion panel is opened but the nursery entry does not appear at the top of the new browser window. Anchor links using Safari and Google Chrome fared better (10 out of 14 links worked properly, and 8/14, respectively), whereas when using Firefox and IE, only 3 anchor links worked properly. The target audience for this website will be using IE and Firefox, so I would appreciate any help to figure out how to tweak the code so that the most, if not all, anchor links work properly on these two browsers in particular.
Here's an anchor link which worked perfectly in IE, GC, and Safari, but in FF, the entry did not appear at the top of the new browser window.
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem
http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?luzon=9#mangatarem [To access the anchor link on the Map page, mouseover the third green dot from the top of the map (Tooltip--Location: Mangatarem) and then click on "Click here for information."]
Here's a sample anchor link in which the entry did not appear at the top of the new browser window in any of the 4 browsers:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?mindanao=4#magpetAmabel [To access the anchor link on the Map page, go to "Mindanao" at the bottom of the map and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Brgys. Amabel, Bongolanon, Imamaling, & Manobisa; Magpet; North Cotabato) and then click on "Click here for information."]
Here's a sample anchor link in which the anchor link worked properly in GC and Safari, but the entry didn't appear at the top of the browser window in IE and FF:
www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar
http://http://www.alegriadesignstudio.com/RFRI/nurseries_v6.html?visayas=1#bilar [To access the anchor link on the Map page, go to the small island north and a bit west of "Mindanao" which is called "Bohol" and mouseover the fourth green dot below the word "Mindanao" (Tooltip--LOCATION: Bilar; Bohol) and then click on the first "Click here for information."]
Many thanks in advance for your assistance!
Joy

Hi everyone,
I'm still trying to figure out how to resolve the problem of anchor links to accordion panels not working properly across browsers (see original post for details). I would greatly appreciate any suggestions on how to resolve the problem.
Many thanks in advance.
Joy

DirectAccess on Server 2012 R2 with Single NIC behind NAT on IPv4 only Corporate Network Results in "DNS Not Working Properly"

I hit this problem at a customer site and can re-produce it in a simple lab. Lab environment: servers:
1x Server 2012 R2 DC and DNS server - DC1 - 10.0.0.1
1x Server 2012 R2 DirectAccess (DA) server - DA1 - 10.0.0.100
Servers are running "Update" (KB2919355) and following DA hotfixes:
KB2929930
KB2966087
I configured DA (via advanced wizard) as follows:
DA and remote access
AD group
directaccess-webprobehost DNA (A) record pointing to 10.0.0.100
behind an edge device (with a single network adapter)
SSL certificate from enterprise root CA issued to directaccess.contoso.com
NLS on remote server using https://nls.corp.contoso.com
DNS: corp.contoso.com = 10.0.0.1; nls.corp.contoso.com = ""
DNS suffix search list = corp.contoso.com
The DNS server validates successfully in the configuration UI.
With this configuration, I get a static IPv6 address of fd79:7a37:cbd9:3333::1/128 assigned to the NIC
The operations status is all green apart from DNS which displays the following error:
"DNS: Not Working Properly"
Error:
None of the enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 used by DirectAccess clients for name resolution are responding. This might affect DirectAccess client connectivity to corporate resources.
Causes:
Enterprise DNS servers fd79:7a37:cbd9:7777::a00:1 are not responding.
I can, however ping fd79:7a37:cbd9:7777::a00:1 (which is the DNS64 translation of 10.0.0.1)
I would like to know what checks are failing as there are no failures in Event Viewer.
I have come across forums where people have the same issue and fix it by specifying the local IP (in this case 10.0.0.100) as the DNS server, however Richard Hicks has confirmed with me that the DNS server should be set to the DNS server, not the DA server's
IP.

Thanks for the post Matt,
ISATAP has been disabled on my DA server, so the results of a "ROUTE PRINT -6" command yields:
===========================================================================
Interface List
12...00 15 5d 01 03 64 ......Microsoft Hyper-V Network Adapter
1...........................Software Loopback Interface 1
14...00 00 00 00 00 00 00 e0 IPHTTPSInterface
===========================================================================
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
12 261 fd79:7a37:cbd9::/48 On-link
14 306 fd79:7a37:cbd9:1000::/64 On-link
14 306 fd79:7a37:cbd9:1000::/128   On-link
14 306 fd79:7a37:cbd9:1000::1/128     On-link
14 306 fd79:7a37:cbd9:1000::2/128    On-link
14 306 fd79:7a37:cbd9:1000:814c:28be:46b5:52c1/128   On-link
12 261 fd79:7a37:cbd9:3333::1/128 On-link
12 261 fd79:7a37:cbd9:7777::/96 On-link
12 261 fe80::/64 On-link
14 306 fe80::/64 On-link
12 261 fe80::20c0:e848:d304:9f01/128   On-link
14 306 fe80::814c:28be:46b5:52c1/128     On-link
1 306 ff00::/8 On-link
12 261 ff00::/8 On-link
14 306 ff00::/8 On-link
===========================================================================
Persistent Routes:
If Metric Network Destination Gateway
0 4294967295 fd79:7a37:cbd9:1000::/64 On-link
0 4294967295 fd79:7a37:cbd9::/48 On-link
0 4294967295 fd79:7a37:cbd9:7777::/96 On-link
===========================================================================

Microphone is not working properly

Hello guys
I have bought a laptop 7 months ago and the microphone was working good at that time but 2 weeks ago I discovered that its not working properly I need to put my mouth in front of the mic and shout to hear a very low voice my laptop is Toshiba L850 PSKFWA-01R012 what I've done so far:
checked the levels of the mic-reinstalled the drivers(Realtek HD audio)-I even made a reinstall for the windows...still the same problem that I need to blow or shout in front of the mic to have a low voice

This is the forum for Toshiba USA. You may want to contact Toshiba in your region.
- Peter

Charger is not working properly

Hi, after 10.9.2 update my charger is not working properly. First I thought the problem was the charger itself had died, but then I saw a pale light. I searched here and found that resetting SMC could be a solution. It worked for a while, but now the problem is back and resetting again doesn't work. I also resetted PRAM and nothing happens. The light is now green, but battery status says it isn't charging.
What else can I do? Mavericks updates are a headache that has already made me format my laptop – because of another problem– and I'd love to avoid it. Thanks in advance.

If you are still under warranty and/or have AppleCare, call them. Let them deal w/it.
OOW: Take your MBP & charger to your local Apple Store or an AASP. Diagnostic testing is FREE!

YouTube is not working properly of my Safari. Can you help fix it?

So for some reason YouTube is not working properly on my Safari. I don't know why but its normal for Chrome. Can anyone help me fix this? Here is what is happening.

This looks like an emerging issue with YouTube. But, to make sure:
1) Quit safari (command + q with it open)
2) Open finder. Click on "go" on the top menu bar, then click on "go to folder." In the prompt that comes up, type in:
~/library
3) Pull the caches folder to the trash. This will ask for your password
4) Open Safari. Click "Safari" by the Apple logo, then click "reset safari." Make sure everything is selected, then reset safari.
5) Try again.
If that doesn't work, the resolution by someone else I was working with (see thread here) was:
daMeeze wrote:
I was able to access help topics in YT by not signing in. Massive numbers of ppl with same issue. Fixed by signing in and scrolling to bottom of page to "Something New" and trying out the Feather beta test. It sounds like a YT issue *whew*. THANK YOU for sticking with me :-)

Test voice-translation rule not working properly

Similar Messages

Maybe you are looking for