Testapplication Engineer LabView - Medical Engineering project in beautiful Austria

----------Please find the English Version attached below----------
Sind Sie auf der Suche nach einer neuen, spannenden Herausforderung?
Für meinen österreichischen Kunden aus der Medizintechnikbranche suche ich einen Testapplication Ingenieur.
Aufgaben:
-verantwortlich für die Softwareentwicklung für das Testing
-Implementierung spezifischer Kundenanforderungen
-Validierung von Messergebnissen
-Fehleranalyse
-Dokumentation
Anforderungen:
-Abschluss in Elektrotechnik oder Nachrichtentechnik
-Sehr gute Kenntnisse in NI LabView und Teststand software
-Erfahrungen im Bereich Elektrotechnik von Vorteil
-Gute Englischkenntnisse
Projektdaten:
-Standort: Österreich
-Laufzeit: mindestens 6 Monate
-attraktive Vergütung
Ich freue mich auf Ihren aktuellen Lebenslauf: [email protected]
Bei Fragen können Sie mich jederzeit unter der 089/55197880 erreichen.
Viele Grüße aus München,
Johannes Donat
Are you currently on the hunt for an exciting job opportunity?
I am looking for a test application engineer for my austrian customer in the field of medical engineering.
Tasks:
-responsible for software design
-testing electronic assemblies
-implementation of specific requirements
Requirements:
-degree in electronics or telecommunications
-very good knowledge in NI LabView
-very good knowledge in TestStand Software
Project data&colon;
-location: Austria
-duration: 6 months
I look forward to your updated CV: [email protected]
Please don't hesitate to contact me at: 0049-89-55197-880

09-09-2012
Dear Hiring Manager:
As a Senior LabVIEW Engineer, and long time contributor to the technical ladder, I have expertise in consumer and government communication systems. I have 20 plus years excelling in manufacturing, development, material and reliability engineering. Additionally, I have 10 plus years of automation expertise.
Whether planning for new product introduction or field failure rate improvements, I believe you will find my experience in RF, hardware & software and deployment of root cause analysis methods into key processes, a value-added asset to your programs.
My broad technical skills and leadership abilities have been major contributors to driving cost reduction and corrective action over many new product launches, and I am looking forward to repeating success stories in your group.
Experience has taught me that technical skill alone cannot guarantee meeting all goals and I bring your firm commitment, perseverance, flexibility, and the critical ability to work productively with others in challenging situations.
I welcome the opportunity to speak with you further about how my diverse experience and up-to-date skills will add value to your company’s bottom line.
I look forward to hearing from you directly at (561) 792-6026, (561) 351-4776
Sincerely,
Brian N. Nover
14635 Horseshoe Trace
Wellington, FL 33414
Attachments:
Nover-Brian-Resume-2012RFLV.docx ‏23 KB

Similar Messages

Senior Test Automation Engineer LabView Perm Position in San Diego

Senior Hardware Test Automation Engineer- LabView
Company is, headquartered in San Diego, California, is focused on developing technology for the continuous monitoring of glucose in people with diabetes. Company is committed to developing technologies and products that improve the lives of people with diabetes and is currently looking for a Senior Test Automation Engineer.
Summary
This position is ideal for a highly self-motivated individual with software and hardware skills to strategize and design custom tools and test automation to meet design, cost and delivery targets.
As a Senior Test Automation Engineer, you’ll be bridging R&D to volume production by creating functional tests using LabView for production of Company products.
Duties & Responsibilities:
Create automated processes and test systems. Transition new products from prototype to production. Participate in design reviews. Develop test plans. Develop test software and hardware platforms. Review designs for manufacturability, improving cost & quality and increasing yields. Programming in high-level languages or scripting languages to control T&M Instruments and electromechanical systems. Program motion control and data acquisition systems. Develop test strategies to drive test time reduction. Develop test requirements and procedures in concurrence with design requirements. Document test procedures and results in conformance with ISO and FDA standards.
Required Qualifications:
Bachelors or Masters Degree in Electrical Engineering or similar discipline. At least 7 years experience in test automation, expert level designing and developing with LabView. Experience with relational databases. Experience with C#. Solid technical and theoretical background of electronics hardware and software. Demonstrated ability to work effectively in a fast-paced, team oriented, multi-tasking environment and to be willing to do what it takes to meet project commitments and deadlines. Good interpersonal skills, including good technical communication skills, must be self-directed, self-motivated and be able to work in a cross-functional team environment. Ability to work in a highly dynamic environment. Advanced knowledge in setting up ATE test suite running on LabVIEW. Experience leading projects and also interfacing with engineering, suppliers and contract manufacturer. Experience in RF is highly desirable. Advanced software-programming skills. Experience in statistical data analysis tools. PCB in-circuit and functional test knowledge is an asset. Experience in all facets of qualification, including environmental, HALT, and ESD testing would be an asset.
Please send resume to: [email protected]: 951-303-1841. Company offers an excellent benefits package and great work environment.
Retained Search Firm specializing in TElecom, Medical Devices, Biomed, BioTech, Ate, Semi, Legal, Medical, Real Estate, Commercial Real Estate, IT

Hi
I completed my M.S in electronics engineering and working with GE in INDIA since June 2005. I have total 2 years of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and hardware.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Please find attached resume.
Thanks & Regards
Anil Punnam
Attachments:
Resume_Anil.pdf ‏1 KB

Test System Engineer / LabVIEW Developer

As a member of the Nexjen Systems team, the Test System Engineer / LabVIEW Developer performs engineering design, software development and hardware specification for custom test & measurement systems.
Nexjen Systems offers a challenging environment where you can:
Develop your Engineering, Design and Software Development skills.
Refine your communication skills through direct client interaction.
Take responsibility for highly technical projects, with mentoring from experienced engineers.
Add significant value to clients’ product development and engineering efforts.
Nexjen Systems is a premier integrator of LabVIEW-based, automated test & measurement systems. We pride ourselves on providing a very high level of technical value to our clients through a range of services focused on test system engineering, construction and deployment. Nexjen Systems is located in Charlotte, our clients are located around the world. Learn more at www.nexjen.com .
Position Requirements
Engineering Degree (Electrical, Computer or Mechanical preferably).
3-5 Years LabVIEW and/or TestStand Development Experience.
3-5 Years Automated Test Equipment Design or Test Engineering Experience.
Desire to grow as an Engineer/Developer in a challenging technical environment.
PLEASE EMAIL RESUME' TO [email protected]

It would appear at their headquarters in Charlotte, North Carolina, USA
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Lead Systems/Software Engineer (LabVIEW)...Hanover, MD...General Dynamics

I have an opportunity for a Sr. Systems/Software Engineer (LabVIEW) with General Dynamics-AIS (www.gd-ais.com) in the Hanover, MD area that I would like to discuss with you ASAP.
This opportunity will support General Dynamics' Intelligence, Surveillance, and Reconnaissance Systems group and a number of our primed programs. Working in this capacity you will be responsible for systems engineering activities related to the proposal, system level design, detail design and manufacture of advanced electronics systems. We are targeting experience with LabVIEW, as well as a background in system software control architectures, developing operational and testing software applications for COTS and custom built devices, interpreting system requirements testing, testing software modules to verify results meet requirements, etc. This is a ‘hands on’ role that will include the system analysis, design, development, test and evaluation activities, as well as ensuring the integration of software, hardware, reliability, maintainability, safety, survivability, human and other requirements in the total engineering effort. A TS/SCI with a fullscope polygraph is required.
This position is fulltime, $$$$ is open, offers full benefits (medical/dental/vision, 401k, PTO, 100% tuition reimbursement, etc.) and is available ASAP. I am a recruiter, but I work for GD-AIS…I am not a 3rd party headhunter. Does this sound like something that may interest you?
Please advise....
CT
PS. If you would like to take a closer look at this opportunity please e-mail me a copy of your resume and salary requirements (don’t need a commitment…just an idea of what you are targeting)? Thanks in advance.
Craig C. Twiste
General Dynamics-AIS
[email protected]

Anyone looking for Software Engineer(LabVIEW/C++) opportunity in Pittsburgh, PA?

Hello, my name is Nicholas Ricchiuto and I am looking for a Software Engineer (LabVIEW/C++) for a company in Pittsburgh Called Acutronic. If you know of any Software Engineers looking for work, please pass along my information below, I could sure use your help. Thank you very much! -Nick
Nicholas Ricchiuto
B&V Stafffing Inc
724-933-5218
[email protected]
ATE Software Engineer (Pittsburgh, PA –RIDC Park)You will be responsible for a challenging new product development. In this role you will implementcomplex automated test algorithms and data acquisition software for inertial sensors and MEMS(micro-electro-mechanical systems) inertial devices.Your roles/responsibilities will include:• Translate marketing inputs into detailed requirements and planning documents• Design, code, debug, document and maintain software code in LabVIEW and C/C++/C#.• Plan and execute software releases• Plan and accomplish goals relying on experience and judgment Your qualifications/skills should include:• BS in Electrical Engineering, Computer Engineering or related field; MS preferred• 7+ years experience in automation, data acquisition, or related software development• Experience with National Instruments LabVIEW, Test Stand, and related tools• Experience developing user interfaces with National Instruments tools• Experience with defect tracking, configuration management and version control tools• Knowledge of C, C++, and real time operating system functionality a plus• Familiarity with all aspects of automation engineering including mechanical, electrical, controls, andinstrumentation disciplines• Experience with serial communication and networks in general• Experience integrating automation systems• Good knowledge of computer hardware and systems• Understanding of software process issues• Familiarity with SCRUM or other agile software development a plus• Experience in testing inertial sensors a plus• Must be a US Citizen or Permanent Resident

Please post this to the LabVIEW Job Openings board.

Systems Engineer(LabVIEW)

Excellent opportunity for Systems Engineer(LabVIEW)
Locationheffield
Salary:£30 to £37k per annum
Austin Consultants are a National Instruments Alliance Partner and have been the UKs highest certified LabVIEW Consultants for three of the last four years. We are an elite team of LabVIEW Engineering professionals and software programmers working across multiple industries with a passion for problem solving and being at the forefront of technology.
We are currently looking for a LabVIEW Systems Engineer to join our dynamic and expanding team in our northern office based in the heart of Sheffield . As a Systems Engineer, you'll be part of a team that is responsible for developing both hardware and software applications based on Object Oriented Technology and Event based Architectures primarily in the LabVIEW Programming Language and on the National Instruments Hardware Platforms.
Key Skills
Qualifications & Requirements:
◦ Minimum of 3 continuous year’s practical experience in instrumentation & control, industrial automation and ATE is required.
◦ Minimum 2.1 honours degree in engineering or science related field,
◦ Minimum of LabVIEW qualification of Certified LabVIEW Developer or equivalent.
◦ Firm knowledge and experience of National Instruments embedded systems, including LabVIEW FPGA and LabVIEW Real Time.
◦ Understanding and practical experience of object oriented principles.
◦ Experience with all National Instruments hardware platforms, including DAQmx, cRIO, PXI,
◦ Practical electrical debug experience.
◦ Experience in a second language of JAVA, C and C++ is preferred but not essential.
◦ Ability to learn new skills/languages/applications quickly (MATLAB, JavaScript, STK, etc.).
◦ Must be able to handle multiple tasks and enjoy working with people.
◦ Strong problem solving skills
◦ Excellent communication skill
◦ A proactive/can do attitude
◦ Legal right to live and work in the UK. Sponsorship is not available.
◦ Must hold a full clean and valid UK driving license and be flexible to travel throughout UK.
Key Responsibilities:
The duties and responsibilities of this position include, but are not limited to, interacting directly with customers to program, train, inform, advise and consult in the design of their applications using the best test and measurement hardware and software by:
◦ Programming memory and speed efficient applications using LabVIEW and Object Oriented Programming and Event-based architectures.
◦ Developing intuitive GUIs.
◦ Selecting the correct measurement hardware for a given application based on a customer’s specification.
◦ Providing timely, accurate and effective solutions to technical problems.
◦ Providing guidance on the installation and working functionality of both software and hardware, including explanation of configuration settings.
◦Remaining aware of all competitive products and how they compare technically with Austin Consultants' core products.
◦ Working with the business development team to develop proof of concepts for customers.
◦ Must be available and happy to travel and work on customer sites around the UK.
Kindly send us your updated CV or call us for confidential chat regarding the opportunity.
Mathi Narayanaswamy
Resource Consultant
(LabVIEW, TestStand, VeriStand, VISION and other NI technologies)
Austin Resourcing (Division of Austin Consultants, National instruments Silver Alliance Partner)
Studio 41, Clink Street Studios
Clink Street
London
SE1 9DG
Tel: 0800 772 0795
Mobile: 07809344621
Email:[email protected]
www.austinresourcing.co.uk
LinkedIn: uk.linkedin.com/in/austinresourcing
Twitter: www.twitter.com/austinrecruit
Austin Consultants are the highest certified LabVIEW Consultancy in the UK. Visit them at www.AustinConsultants.co.uk
Come and Visit Austin Resourcing's Stand at NI Day on Nov 4th ,2014

Hello Fred,
Can you please tell me if Indian citizen can apply for this position. I have a graduate degree from US and have the work permit to work anywhere in US. So can I apply?
Thank you.
-Ujwal

Profibus-Connection with NI LabVIEW Runtime-engine

Hi,
I have a Profibus network running in our porduction lane.
Now we want to report several states of this production continously.
Therefore I want to connect a desktop-pc via profibus to the PLC. But I want to run the VI on the PC as an application(exe) with the NI LabVIEW runtime engine because I won´t install LabVIEW on this PC. (on my development computer I have LabVIEW 2011)
My question is:
Does the Profibus communication work if I run the VI that way if I add the needed "additional installer" to my installer file?
I´m quite sure that it will work but I want to check this point before ordering a Profibus-Board.
I hope you understand my question and give me a positive answer so I can order an new Profibus-PCI-Board
best regards
Martin

Hi Martin,
the scenario you are describing sounds reasonable and that should work.
But in general, if you buy something at NI you can always call and describe your situation. Either the sales person can help you with your decision or in more complicated cases the sales person redirects you to a support engineer.
Best regards,
Christoph

Research Design Engineer - LabVIEW/MATLAB Programmer -Boston, Massachusetts

Research Design Engineer - LabVIEW/MATLAB Programmer
The Eaton-Peabody Laboratory seeks an experienced programmer to design and write LabVIEW and MATLAB software to control stimulus generation, data acquisition and response analysis for a range of cutting-edge biomedical research projects. The successful candidate will join an existing team of hardware and software engineers within a multidisciplinary research laboratory, located at the Massachusetts Eye and Ear Infirmary, comprising 21 NIH-funded investigators studying a variety of aspects of hearing and deafness. To see current research projects here at the Eaton-Peabody Laboratory, go to our website: http://www.masseyeandear.org/research/ent/eaton-peabody/.
Minimum Qualifications:
BA/BS in Math, Computer Science or equivalent
demonstrated expertise in MATLAB, LabVIEW or C++
demonstrated ability to work and communicate effectively with technical and non-technical colleagues
Additional Qualifications:
experience with software control of digital and analog I/O boards
experience with scientific programming
Send a cover letter, resume, salary requirements and contact information for three references to:
[email protected]

Labview Programmer

Load Labview runtime engine with matlab platform

When I use labview DLL on matlab platform it loads labview runtime engine.
Once I use "close all" command of matlab, labview runtime engine is not available any more so I want to reload it.
How can I do this?
If I run the DLL again an error is occurred.
Best regards,
Nir

Hello Nir,
I recommend contacting MathWorks for assistance with the exact functionality and results of close all. Based on online documentation for calling DLLs in MATLAB, you should use unloadlibrary to remove the LabVIEW DLL from memory instead of close all. If you use this method, are you able to load the LabVIEW DLL (using the loadlibrary function) and call it successfully from MATLAB?
MATLAB® is a registered trademark of The MathWorks, Inc.
Regards,
Andrew Brown
Applications Engineer
National Instruments

Computer and telecommmunication engineer & Labview programmer seek job

Hi all,
I completed my BsE in computer and telecommunication engineering(Grade: very good) . I have woked for 5 months on a project conserning controlling and diagnosis ashynchronous motors over internet by developping kalman filter(Electrical engineering project), where i get a lot af exeprience in LabVIEW 7.1 and labview 8 with a high ability for programming and analysis with the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and Ni hardwares & different sensors types.
Ability to analyze empirical data against theoretical predictions to enhance and improve mathematical model of system.
Ability to work on a new devices.
Ability to troubleshoot electrical and electronic systems at the module and equipment level.
Discipline and organization with respect to software maintenance and version management.
Ability work both alone and with colleagues to solve problems and to weigh the merits of differing approaches.
I am ready to relocate and join your team.
for more information about my project visit : www.geocities.com/charbellabviewproject/index.html
You can contact me at [email protected]
Thanks & Regards
Charbel Mattar
Jounieh, Lebanon
Attachments:
cv eng. charbel mattar_FOR_LABVIEW.doc ‏50 KB

Hi John
This is Anil Punnam. I completed my M.S in Electronics engineering and working with GE in INDIA since June 2005. I have total 20 months of experience with LabVIEW and have the follwoing skills.
Intermediate-to-advanced knowledge of LabVIEW.
Familiarity with data acquisition concepts and hardware.
Discipline and organization with respect to software maintenance and version management.
Ability to work both alone and with colleagues to solve problems and to weigh the merits of differing approaches
you can reach me at [email protected]
Thanks & Regards
Anil Punnam

LabVIEW Runtime Engine 2010 NI_AALPro Error

Hi All,
I have an problem with the executable version of my LabVIEW program. I just created an LabVIEW program in LabVIEW Professional 2010 version to acquire some FFT spectrums so it also use some function palettes of Sound and Vibrations toolkit like Power Spectrum, Peak Search, Power in Band etc.
Then I just created an executable version of the program to run on a different system (Tools>>Build Executable Verion(EXE)). But when I tried to run the executable verion on a different system is showed some errors. I am attaching a printscreen of all errors showed.
So, the executable version of the program is working fine in the develoment system but showed some errors when we try to run it on a different system. We have already installed the LabVIEW runtime engine 2010 as well in the second system.
My one more question is when we build an executable version of a LabVIEW program then it should run on all PC without any other software (Runtime engine) because it got an extension of .exe
so is there any chance or way to build a totally standalone executable version of the program without using any runtime engine as well.
Thanks
Attachments:
error.JPG ‏28 KB
dll & lvlib.JPG ‏41 KB

Hi PSBRRR,
It seems like you didn't include all the dependencies of your VI or project to your build specification. Can you send a screenshot of the Source Files Setting page of the Application Properties dialog box ? You have to add all the VIs and DLLs that are used in the Sound & Vibration toolkit and any others you are using to your executable file or support directory.
For the last question : no you can't. Since LabVIEW 2010, the Run-Time Engine is like the "Java Virtual Machine". The compiled code inside your EXE is interpreted by the "LabVIEW Virtual Machine" included in the LabVIEW Run-Time Engine. That's why it requires the Run-Time Engine to be executed or at least the development environment (previous versions of LabVIEW didn't use this principle but it was also required to have the Run-Time Engine installed).
Regards,
Da Helmut

Can you put the labview runtime engine in a vi?

hello,
can you put the labview runtime engine in a vi when you build an application or do you need to install it separately on each computer that is going to run a labview application? thank you

I found the tutorials in labview help pretty good
Example: Building a Stand-Alone Application
Example: Building an Installer (Windows)
This certainly got me started working with the project explorer to build and deploy your application.
Hope this helps
David

Need help with almost completed plugin engine project

Hi all,
For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
Look forward to some replies.

Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

LabVIEW Runtime engine on Windows Embedded Standard 7 P 32/64 bit?

Did anyone ever try to install and run LabVIEW Runtime engine (2011 or later) on Windows Embedded Standard 7 P 32/64 bit?
I am trying to figure out if this will work, for example on a Beckhoff CX5120 embedded PC. I will need to have some simple TCP/IP communication in order to exchange information with another PC, but nothing else, i.e. drivers, etc...
I hope someone tried to do this already. I just don't have the right hardware right now to check it out.
Solved!
Go to Solution.

As NI sells touch panels with WES7 installed here: http://sine.ni.com/nips/cds/view/p/lang/en/nid/210551 it's pretty safe to assume they've used the RTE on WES7.
But yes, it's been done.

Unable to determine the install root path for the LabVIEW Runtime Engine

Hi,
i have an issue with using a LabVIEW interop assembly in a .NET application. I get an exception "Unable to determine the install root path for the LabVIEW Runtime Engine" when calling the assembly.
The little test program is attached below. It's called dotNETHost.exe. If you excecute the programm a dialog with an button appears. Clicking the button shall open another dialog (the LabVIEW Interop component). But the only thing I get is the exception message. The ZIP folder also contains the complete exception meassage (ExceptionMessange.jpg & ExceptionDetails.txt).
The Interop Assembly was built with LabVIEW 2011. We use Visual Studio 2010 and .NET 4.0.. The dotNETHost.exe.config file is prepared as mentioned in Knowledge base - Loading .NET 4.0 assemblies.
The Interop assembly contains only one simple dialog (loop is finished by clicking OK) without calling any other VIs or other DLL's. In case of this there's also no support directory generated by the build process.
I have no idea why it doesn' work. I hope anyone can help me.
Thanks in advance
Kay
Attachments:
Debug.zip ‏75 KB

This may be unrelated, but Labview and .Net4.0 dont work well together. Not yet anyway. I had to compile my assembly in 3.5 to get it to work.
Please read the following:
http://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/configuring_clr_version/
http://digital.ni.com/public.nsf/allkb/32B0BA28A72AA87D8625782600737DE9
http://digital.ni.com/public.nsf/allkb/2030D78CFB2F0ADA86257718006362A3?OpenDocument
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.

Testapplication Engineer LabView - Medical Engineering project in beautiful Austria

Similar Messages

Maybe you are looking for