Testconnectivity fails pinging Mapi Mail store RPC_S_SERVER_UNAVAILABLE-Error(0x6ba)

Dear all
I tested my Connectivity using this tool:
https://www.testexchangeconnectivity.com
Any Support is highly appriciated.
Attempting to ping RPC endpoint 6001 (Exchange Information Store) on server Mailboxserver.Domain.com:6001.
The attempt to ping the endpoint failed.
Additional Details
The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process
I already checked those links:
https://social.technet.microsoft.com/Forums/exchange/en-US/bd7a632f-2d58-4ff2-becf-5f762efa460d/action?threadDisplayName=the-rpcsserverunavailable-error-0x6ba
https://social.technet.microsoft.com/Forums/exchange/en-US/8306a6f7-df0c-4438-84aa-662c82bb4614/action?threadDisplayName=rpcsserverunavailable-0x6ba
But i still got this issue. What can i do or test? I already completely removed and added the Feature as well as the Outlook Anywhere in Exchange.
I am listeing on the right Ports and IPv6 is disabled. I am running all the stuff on one single server.
Any Ideas?
Purpose: Need to migrate to Office 365, any other suggestions than Remotemove Migration?
Best regards
Daniel
Daniel Meili

Dear Allen
The Value is already set to 2147483648.
Telnet of the Ports 6001,6002,6004 OK.
I also tested the following:
Test-OutlookConnectivity -RpcTestType:Server -RpcProxyAuthenticationType:Basic -RpcClientAccess
Server:SERVER
ClientAccessServer   ServiceEndpoint                               Scenario                            Result
 Latency
                                        (MS)
Server Server                                     RFRI::GetReferral.                  Success
...9.38
Server Server                                     NSPI::GetProfileDetails.            Success  234.38
Server Server                                     Mailbox::Connect.                  
Success ...2.50
Server Server                                     Mailbox::Logon.                    
Success   78.12
Best regards
Daniel
Daniel Meili

Similar Messages

  • Testconnectivity fails at Mapi mail store Error 1818 Cancelled

    Hello
    I got one single Exchange 2010 SP3 Server installed. Everything working fine.
    I want to activate Outlook anywhere. Did this following the usual Procedure.
    I got everything activated, am listening on Ports 6001 6002 and 6004 on my exchange Server and i think everything is working fine. I also followed this article http://blogs.technet.com/b/exchange/archive/2008/06/20/3405633.aspx
    I can't get this Testexchangeconectivity Tool get working it always fails on this Point
    Trying to Ping the MAPI Mail Store "FQDN of Exchange:6001" with an RPC Error 1818 call cancelled.
    Any Ideas?
    Daniel Meili

    Hi,
    The error 1818 indicates that the RPC call timed out. From your description, I would like to clarify the following things for troubleshooting:
    1. Make sure that you have installed the Windows feature "RPC over HTTP Proxy".
    2. Disable Outlook Anywhere and wait a few minutes before you enable it again and check the result.
    What's more, here is a thread for your reference.
    ARR won't let through RPC
    https://social.technet.microsoft.com/Forums/office/en-US/8ad5a2c1-93b1-45ba-9d79-fe68c5711b09/arr-wont-let-through-rpc?forum=exchangesvrclients
    Hope this can be helpful.
    Best regards,
    Amy Wang
    TechNet Community Support

  • OutlookAnywhere - MAPI Mail Store endpoint - attemped to ping failed

    Hi,
    I have a DC (Server 2012 R2) setup, with RDS and EXCHANGE (with MS Exchange 2013 SP1) as virtual servers.
    RDS is facing the internet (mail.domain.com @ Port 443), and is using ARR with URL Rewrite for OWA, EWS, Autodiscover, ActiveSync and ECP, rewriting all requests to EXCHANGE.
    When I run tests on https://testconnectivity.microsoft.com for Outlook connectivity, it fails saying:
    Attempting to ping the MAPI Mail Store endpoint with identity: [email protected]:6001.
           The attempt to ping the endpoint failed.
            Tell me more about this issue and how to resolve it
          Additional Details
    The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
    Elapsed Time: 3310 ms.
    Telnet from DC or RDS into EXCHANGE on port 6001 works fine.
    However, I am concerned that there may be two things preventing this from working:
    1) [email protected]:6001 <-- shouldn't this be trying to connect to mail.domain.com:6001 and not domain.com?
    2) Even if there is nothing wrong with the above, I would assume it is using RDS's standard 443 port, and trying to ping 6001 on RDS itself, since as far as I know, URL Rewrite has no rules to forward port requests on to exchange.
    Am I right in my assumptions?
                  

    Exchange 2013 uses GUIDs for profiles, so your item 1 looks okay to me.
    That error doesn't mean that ExRCA can't ping 6001, it means that the RPC-over-HTTPS proxy server can't ping that port on the back-end server.  I would first make sure that all your names are correct in your configuration, and that all services are
    running.
    Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

  • The attempt to ping the MAPI Mail Store endpoint endpoint failed

    Hi,
    We have just moved from Exchange 2010 to 2013 (completely new organisation/ad, there were lots of problems with the old one). All roles are performed by a single server (budgets). Everything went perfectly however Outlook cannot connect, creating a new profile
    finds the settings via Autodiscover (via 3rd party cert) but then the following error occurs:
    (There were images before, but apparently I am not allowed to post any images so apologies for the typing out)
    The action could not be completed. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action.
    The check name doesn't work and the account cannot be created (and from what I have read Exchange 2013 doesn't support non-autoconfigure connections anymore).
    Before I enabled Outlook anywhere any Outlook connections would just constantly ask for credentials, however I can't go back now it seems. Does Exchange 2013 only support RPC via HTTP connections for Outlook? That is something new if true.
    Then I checked https://testconnectivity.microsoft.com/ and the following is displayed:
    Attempting to ping the MAPI Mail Store enpoint with identity [email protected]:6000
    The attempt to ping the endpoint failed
    The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
    Cue some intensive Googling (sorry Binging?) and several suggestions were found to resolve the issue from various threads here and blog posts:
    Add IP  SERVER to the hosts and lmhosts.sam files
    Disable IPv6
    edit HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Rpc\RpcProxy\ValidPorts to everything I could think of: 
    NETBOIS:593;NETBOIS:49152-65535;FQDN:49152-65535;localhost:49152-65535;Outlook anywhere FQDN:49152-65535;
    Telnet into port 6001, 6002 and 6004 from the server. This throws an interesting result:
    Port 6001: ncacn_http/1.0 (which seems fine)
    Port 6002: can't connect
    Port 6004: can't connect
    This looks to be my issue, but I can't see why it's not connecting and I don't know how to check any further. The other thing is the Remote Connection Analyser is looking for port 6001 and it can't connect.
    Any help is much appreciated, I think I have tried everything I can think of and have reached the end of my intelligence.
    -macole1

    Hi Mavis,
    Many thanks for the reply. You are thinking along similar lines to me. I have re-enabled IPv6, I never worked out how to turn off Outlook Anywhere.
    1. DNS is working correctly, I can telnet into port 6001 using the FQDN and localhost
    2. My VaildPorts key is as follows: I think it is okay.
    COMPUTERNAME:593;COMPUTERNAME:49152-65535;FQDN:49152-65535;localhost:49152-65535;OUTLOOKANYWHEREADDRESS:49152-65535;
    3. This is where I was thinking the error comes from, however I can't find any information on how to test this.
    netstat -a shows:
    Active Connections
      Proto  Local Address          Foreign Address        State PID
    TCP    0.0.0.0:6001           BOSTON:0               LISTENING       13764
      TCP    0.0.0.0:6005           BOSTON:0               LISTENING       356
      TCP    0.0.0.0:6006           BOSTON:0               LISTENING       760
     TCP    [::]:6001              BOSTON:0               LISTENING       13764
      TCP    [::]:6005              BOSTON:0               LISTENING       356
      TCP    [::]:6006              BOSTON:0               LISTENING       760
    So it's not even listening on 6002 or 6004.
    These are what the PID are. Looks like only 6001 is related.
    PID    Process
    13764  Microsoft.Exchange.RpcClientAccess.Service.exe
    356    wininit.exe
    760    svchost.exe
    4. I tried turning off Windows firewall (the only firewall) to test it and it made no difference therefore it was re-enabled. As all the roles are on the same server I assume that would make no difference.
    Do you have any ideas why there would be no service at 6002 or 6004? This looks to be the root of the issue.
    Many thanks for your help so far.
    -macole1

  • Exchange 2010 RPC issue, "The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process"

    Hi All,
    this is the first time iv had to post on here on a forum since ive been doing IT but here goes.
    Server background:
    SBS 2011
    Exchange 2010 SP3 RU6
    Installed 2 years ago and has run relatively smooth since installation
    Possible Cause: a recent application that had created a virtual directory in IIS.
    Issue:
    A user recently reported an issue with Outlook Anywhere, i did an exchange connection test and reported the following error
    The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
    Elapsed Time: 3834 ms.
    Fixes Tried so far
    - Reg fix for ports 6001,6002,6004
    - Telnet 127.0.0.1 6001 all returns expected results
    - Disable RPC then Re-enable via the management console
    -Ran fix my network wizard which has shown an error in compenent 3 which it fixed
    Component ID #3 
    If the Fix My network wizard shows that component ID #3 is broken, this means that within IIS the RPC virtual directory settings are incorrect.
    Continuing to fix this error within the wizard will correct the RPC virtual directory to support both Basic and NTLM authentication to this virtual directory. 
    Any suggestions would be great as im running out of ideas, i have thought about rebuilding outlook anywhere but unsure of the implications on an SBS

    Hi,
    In order to check whether it is an RPC Virtual Directory issue, you can open IE and input:
    Https://mail.domain.com/RPC/RPCProxy.dll
    After inputting the credential, the expected result is a blank page. If not, I means the issue resides on the RPC VD. You can try rebuilding the RPC VD for the first try.
    Thanks,
    Simon Wu
    TechNet Community Support

  • OIM and MS Exchange - Invalid mail store name error

    hello,
    I'm trying to provision a user with a mailbox in Exchange. I have setup SSL between the AD/Exch box and OIM. After a manual provisioning is initiated through OIM, the "Create Mailbox" adapter status is shown as "Rejected".
    In the details, the Reason show is "Invalid mail store name passed". However, the mail store name used in the IT Resource Configuration is as per the connector documentation and as seen in the Exchange System Manager console i.e. "Mailbox Store (BASE)" where "BASE" is the name of the computer where AD/Exch is installed.
    Am I missing something? Is there a full DN of the mail store required? Is this something to do with the access permissions in AD or Exchange?
    Please advise. Thank you!

    Hi,
    I was able to resolve this by changing the value of "Server Name" value in the IT Resource. The issue is not with the Mail Store Name or "Store Name" rather it's with the "Server Name".
    The value of "Server Name" should be the host name without the domain name for example, BASE only instead of BASE.mydomain.com.
    The value of "Store Name" should be as shown in the Windows Exchange Admin Console. E.g. "Mailbox Store (BASE)".
    Also, ensure that the value "AD User" is added under the "Depends On" for the "Exchange" Resource Object.
    Once you provide the values as mentioned above, create a user in OIM and assign AD User and Exchange resources.
    The mailbox will not be created/shown in the Exchange Admin Console unless you access the Exchange URL and login with the target user's credentials.
    The Exchange URL can be accessed as "http://hostname or IP/exchange". Provide the user's username and password and the Outlook Web Access screen will be displayed.
    Now go to Exchange Admin System console and check the mail store if the maiilbox is created.
    Hope this helps. Thanks!!

  • Exchange Connectivity Tool - MAPI Address Book endpoint error

    We have Exchange 2007 installed and are now running into a problem with Outlook Anywhere when we introduced new 2012 Domain Controllers.
    I have ran the outlook anywhere tests from the Micorosft site and run into a failure when the MAPI Address Book test occurs. It will complete fine when it connects to a 2003 domain controller, but not the 2012 domain controllers.
    I have confirmed I get the right response form the 2012 domain controller when I telnet to port 6004. I confirmed there is no ipv6 on any of the servers and I can ping the netbios name and FQDN of the server from the CAS server. There is no firewall
    in between the machines
    Please see the results returned.
    The server returned by the Referral service: DC2K1201.domain.local
    Elapsed Time: 1280 ms.
    Testing the MAPI Address Book endpoint on the Exchange server.
    An error occurred while testing the address book endpoint.
    Additional Details
    Elapsed Time: 3116 ms.
    Test Steps
    Attempting to ping the MAPI Address Book endpoint with identity: DC2K1201.domain.local:6004.
    The attempt to ping the endpoint failed.
    Reason :- RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.

    Hi,
    According to your description, I understand that Outlook Anywhere can’t work when change domain controller to another server.
    If I misunderstand your concern, please do not hesitate to let me know.
    I want to double confirm whether you want to remove the original DC. If so, please follow the below link with checklist of Decommissioning a Domain Controller:
    https://technet.microsoft.com/en-us/library/cc755937%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
    Besides, run Get-DomainController and Get-ADServerSettings to ensure the list of available DC.
    Best Regards,
    Allen Wang

  • [nQSError: 75006] Failed to send MAIL Command

    Hello,
    We are on AIX and Siebel Analytics 7.8.5. We are having a weird issue with ibots. Wwe have around 800 ibots and only 65 of them fail with *[nQSError: 75006] Failed to send MAIL Command* this error. These ibots use to work good. I have created some test ibots and even those fail with the same error.
    Does any one have an idea..how to resolve this?
    Thanks in advance

    We are using Exchange Server. We are able to send e-mails to many usres....that means the credentials are correct. If we reschedule a delivered report..it is successful.
    Eventually succeeded, but encountered and resolved errors...
    Number of skipped recipients: 1 of 2
    +++ ThreadID: 8ca6 : 2010-09-23 09:30:37.000
    iBotID: /shared/_iBots/NBR - ED and Mktg/NBR Alert - Private Equipment
    [nQSError: 75006] Failed to send MAIL command.
    +++ ThreadID: 8ca6 : 2010-09-23 09:30:37.000
    iBotID: /shared/_iBots/NBR - ED and Mktg/NBR Alert - Private Equipment
    ...Trying SMTP Delivery loop again
    +++ ThreadID: 8ca6 : 2010-09-23 09:30:37.000
    ... Sleeping for 9 seconds.
    +++ThreadID: 8ca6 : 2010-09-23 09:30:46.000
    iBotID: /shared/_iBots/NBR - ED and Mktg/NBR Alert - Private Equipment
    [nQSError: 75006] Failed to send MAIL command.
    +++ ThreadID: 8ca6 : 2010-09-23 09:30:46.000
    iBotID: /shared/_iBots/NBR - ED and Mktg/NBR Alert - Private Equipment
    ...Trying SMTP Delivery loop again
    +++ ThreadID: 8ca6 : 2010-09-23 09:30:46.000
    ... Sleeping for 4 seconds.
    +++ ThreadID: 8ca6 : 2010-09-23 09:30:50.000
    iBotID: /shared/_iBots/NBR - ED and Mktg/NBR Alert - Private Equipment
    [nQSError: 75006] Failed to send MAIL command.
    Thanks

  • HT1178 I have failed to Map the Airport Time Capsule to my windows 7 HP laptop as a mapped drive, error message is "access denied"

    I have failed to Map the Airport time capsule to my windows 7 HP laptop, i followed all the installation steps and i get the error message "Access denied, you do not have permission to access this device, contact network administrator"

    Did you install the airport utility for windows?
    Is the windows computer set to home as network location.. it will not work if it is set to work or public.
    Is the TC setup with all SMB type names, short no spaces and pure alphanumeric. No apostrophe.
    Can you ping the TC from your computer? Open a command window and type ping and the tc name or its IP.
    No response you will never be able to get connection .. it is usually firewall problem. Turn off firewall and internet security.
    If it pings then simply type the IP directly into explorer.. \\TCIPaddress. (eg \\10.0.1.1 if the TC is at default)
    That is usually the most foolproof method.

  • Configuration Mail Store Failed

    Could someone help me ?
    This is my log :
    Using paramFile: D:\OCS_ONEBOX\mtier\oes\config\Disk1\install\win32\oraparam.ini
    Checking requirements...
    Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2.
    Actual 5.0 Passed
    Checking monitor: must be configured to display at least 256 colors.
    Actual 4294967296 Passed
    Checking if CPU speed is above 300 MHz.
    Actual 2405MHz Passed
    All requirements met.
    Environment Variables:
         ORACLE_HOME =
         PATH = C:\Program Files\Oracle\jre\1.1.8\bin;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;Z:.;Y:.;
         CLASSPATH = D:\OCS_ONEBOX\mtier\jlib\ldapjclnt9.jar;D:\OCS_ONEBOX\mtier\jlib\repository.jar;D:\OCS_ONEBOX\mtier\jlib\esinstall.jar;D:\OCS_ONEBOX\mtier\jlib\esldap.jar;D:\OCS_ONEBOX\mtier\jlib\providerutil.jar;D:\OCS_ONEBOX\mtier\jlib\ldap.jar;D:\OCS_ONEBOX\mtier\jlib\jndi.jar;
    Username:Administrator
    This installation is being performed using response file D:/OCS_ONEBOX/mtier/oes/config/Disk1/stage/Response/oracle.um.UM_Config.Typical1.rsp.
    Oracle Universal Installer version is 2.3.0.8.0
    This installation is being performed using response file D:/OCS_ONEBOX/mtier/oes/config/Disk1/stage/Response/oracle.um.UM_Config.Typical1.rsp.
    Setting variable 'FROM_LOCATION' to 'D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\products.jar'. Received the value from response file.
    Setting variable 'ORACLE_HOME' to 'D:\OCS_ONEBOX\mtier'. Received the value from response file.
    Setting variable 'TOPLEVEL_COMPONENT' to 'oracle.um.UM_Config,9.0.4.1.0,'. Received the value from response file.
    Setting variable 'SHOW_SPLASH_SCREEN' to 'false'. Received the value from response file.
    Setting variable 'SHOW_WELCOME_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_CUSTOM_TREE_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_COMPONENT_LOCATIONS_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_SUMMARY_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_INSTALL_PROGRESS_PAGE' to 'false'. Received the value from response file.
    Setting variable 'SHOW_REQUIRED_CONFIG_TOOL_PAGE' to 'true'. Received the value from response file.
    Setting variable 'SHOW_CONFIG_TOOL_PAGE' to 'true'. Received the value from response file.
    Setting variable 'SHOW_RELEASE_NOTES' to 'true'. Received the value from response file.
    Setting variable 'SHOW_ROOTSH_CONFIRMATION' to 'true'. Received the value from response file.
    Setting variable 'SHOW_END_SESSION_PAGE' to 'true'. Received the value from response file.
    Setting variable 'SHOW_EXIT_CONFIRMATION' to 'true'. Received the value from response file.
    Setting variable 'NEXT_SESSION' to 'true'. Received the value from response file.
    Setting variable 'NEXT_SESSION_ON_FAIL' to 'true'. Received the value from response file.
    Setting variable 'NEXT_SESSION_RESPONSE' to 'D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\Response\oracle.um.UM_Config.Typical1.rsp'. Received the value from response file.
    Setting variable 'DEINSTALL_LIST' to 'oracle.um.UM_Config,9.0.4.1.0,'. Received the value from response file.
    Setting variable 'SHOW_DEINSTALL_CONFIRMATION' to 'true'. Received the value from response file.
    Setting variable 'SHOW_DEINSTALL_PROGRESS' to 'true'. Received the value from response file.
    Setting variable 'ACCEPT_LICENSE_AGREEMENT' to 'true'. Received the value from response file.
    *** Welcome Page***
    Initializing install inventory
    Setting up install inventory
    *** Specify File Locations Page***
    Setting the 'SourceLocation ( FROM_LOCATION )' property to 'D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\products.jar'. Received the value from response file.
    Setting the 'OracleHome ( ORACLE_HOME )' property to 'D:\OCS_ONEBOX\mtier'. Received the value from response file.
    Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OCSHome_mid'. Received the value from the default settings.
    Initializing OUI access setup
    Setting variable 'ORACLE_HOME' to 'D:\OCS_ONEBOX\mtier'. Received the value from response file.
    Performing operation for OUI access setup
    Setting variable 'CLUSTER_NODES' to ''. Received the value from a code block.
    *** Select a Product to Install Page***
    Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.um.UM_Config, 9.0.4.1.0, >0.0.0.0.0, [ 912 ][OH:2]'. Received the value from the default settings.
    *** Select Installation Type Page***
    Setting the 'InstallType ( DEP_MODE )' property to 'Typical'. Received the value from the default settings.
    Setting the 'TopLevelInstallType ( TLDepModes )' property to 'Typical,'. Received the value from the default settings.
    The selected install type is "typical".
    Install type for "UM configurator 9.0.4.1.0 " is "typical".
    *** Language Selection Page***
    *** Specify Local Host Name Page***
    Setting the 'HostName ( OUI_HOSTNAME )' property to 'oramail.exp.com'. S_LOG_VAR_VALTYPE_CLONE
    *** Component Locations Page***
    *** Entering Component: oracle.um.UM_Config installation
    Setting variable 'system_passwd' to '*Protected value, not to be logged*'. Received the value from response file.
    Setting variable 'sys_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'summary_str' to 'summary'. Received the value from the variable calculation.
    Setting variable 'start_proc_flag' to 'true'. Received the value from the variable calculation.
    Setting variable 'start_proc' to '1'. Received the value from the variable calculation.
    Setting variable 'port_number' to '389'. Received the value from the variable calculation.
    Setting variable 'out_str4' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'out_str31' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'out_str3' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'oid_flag' to '1'. Received the value from the variable calculation.
    Setting variable 'link_htdocs' to 'cal90jsp'. Received the value from the variable calculation.
    Setting variable 'isportinuse_flag' to 'true'. Received the value from the variable calculation.
    Setting variable 'install_cal' to 'false'. Received the value from the variable calculation.
    Setting variable 'host_name' to 'host_name'. Received the value from the variable calculation.
    Setting variable 'global_db_name_list' to ''. Received the value from the variable calculation.
    Setting variable 'global_db_name' to '<SID>.<Domain Name>'. Received the value from the variable calculation.
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'domain_name' to 'oracle.com'. Received the value from the variable calculation.
    Setting variable 'ctxsys_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'create_domain_flag' to 'false'. Received the value from the variable calculation.
    Setting variable 'cookie_domain' to '.oracle.com'. Received the value from the variable calculation.
    Setting variable 'connect_str' to 'connect_str'. Received the value from the variable calculation.
    Setting variable 'config_type' to '0'. Received the value from the variable calculation.
    Setting variable 'config4' to 'false'. Received the value from the variable calculation.
    Setting variable 'config3' to 'false'. Received the value from the variable calculation.
    Setting variable 'config2' to 'false'. Received the value from the variable calculation.
    Setting variable 'config1' to 'false'. Received the value from the variable calculation.
    Setting variable 'cal_umadmin_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'cal_dad_name' to 'cal_dad_name'. Received the value from the variable calculation.
    Setting variable 'b_configureUM' to 'true'. Received the value from the variable calculation.
    Setting variable 'app_svr_port' to 'app_svr_port'. Received the value from the variable calculation.
    Setting variable 'app_svr_host_name' to 'app_svr_host_name'. Received the value from the variable calculation.
    Calling Query WindowsGeneralQueries2.3.0.6.0 getWindowsSystemDirectory
    Query Returned: C:\WINNT\system32
    Setting variable 'SystemRoot' to 'C:\WINNT\system32'. Received the value from the variable calculation.
    Setting variable 'SID' to 'iasdb'. Received the value from the variable calculation.
    Setting variable 'ORAHOME' to ''. Received the value from the variable calculation.
    Setting variable 'Net9_Connect_String' to 'ora9i'. Received the value from the variable calculation.
    Setting variable 'Index_Tblspace' to 'escalindxtbl'. Received the value from the variable calculation.
    Setting variable 'Img_Prefix' to '/i/'. Received the value from the variable calculation.
    Setting variable 'INSTALLHOME' to ''. Received the value from the variable calculation.
    Setting variable 'INSTALLATION_NAME' to ''. Received the value from the variable calculation.
    Setting variable 'HOSTNAME' to ''. Received the value from the variable calculation.
    Setting variable 'Flow_User_Passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'Flow_User' to 'es_cal'. Received the value from the variable calculation.
    Setting variable 'Def_Tblspace' to 'escaldeftbl'. Received the value from the variable calculation.
    Setting variable 'App_User_Passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'App_User' to 'es_cal'. Received the value from the variable calculation.
    Setting variable 'umadmin_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'out_str22' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'es_mail_passwd' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'out_str2' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'out_str24' to '*Protected value, not to be logged*'. Received the value from the variable calculation.
    Setting variable 'global_db_name_list' to '<SID>.<Domain Name>,'. Received the value from a code block.
    *** Unified Messaging Configuration Page***
    Setting the 'TitleLabel' property to 'Unified Messaging Configuration'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'Select one of the following options :'.
    Setting the 'Choices' property to 'Mail Store Database Configuration -
    Installs the mail store schema into a dedicated tablespace in a previously installed
    Oracle 9i database.,Middle Tier Configuration -
    Configures the Unified Messaging protocol servers on this host: SMTP, IMAP4, POP3
    and House Keeper.,'.
    Setting the 'BottomDescLabel' property to ''.
    Setting the 'Descriptions' property to 'null'.
    Setting the 'SelectedIndex ( config_type )' property to '0'. Received the value from the UI page.
    Setting variable 'INSTALLATION_NAME' to 'UM_SYSTEM'. Received the value from a code block.
    Setting variable 'config1' to 'false'. Received the value from a code block.
    Setting variable 'config2' to 'false'. Received the value from a code block.
    Setting variable 'config3' to 'false'. Received the value from a code block.
    Setting variable 'config4' to 'false'. Received the value from a code block.
    Setting variable 'install_cal' to 'false'. Received the value from a code block.
    Setting variable 'oid_flag' to '0'. Received the value from a code block.
    Setting variable 'system_passwd' to '*Protected value, not to be logged*'. Received the value from a code block.
    *** Mail Store Database Configuration Page***
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: System password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 2
    Setting the 'TitleLabel' property to 'Mail Store Database Configuration'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'Enter the values for the service name connect string and system password of this mail store database. These values are used by the Universal Installer to install the mail store schema.'.
    Setting the 'Labels' property to 'Database Host Name,SID,Port Number,System Password,'.
    Setting the 'Types' property to 'TEXTFIELD,TEXTFIELD,TEXTFIELD,SECURE,'.
    Setting the 'Choices' property to ''.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'Selections ( out_str2 )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 2
    *** CTXSYS Password Page***
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: Ctxsys password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 0
    Error:*** Alert: Ctxsys password is invalid, please reenter. ***
    User Selected: Yes/OK
    Calling Query generalQueries2.3.0.6.0 getOS
    Query Returned: Windows 2000
    Calling Query SpawnQueries1.1.4 Spawn
    command = Protected value, not to be logged
    Query Returned: 1
    Setting the 'TitleLabel' property to 'CTXSYS Password'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'This is the password for the ctxsys schema.'.
    Setting the 'Labels' property to 'Enter Password:,'.
    Setting the 'Types' property to 'SECURE,'.
    Setting the 'Choices' property to ''.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'Selections ( out_str24 )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
    Setting variable 'ctxsys_passwd' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'host_name' to 'ormail'. Received the value from a code block.
    Setting variable 'SID' to 'ocsstore'. Received the value from a code block.
    Setting variable 'port_number' to '1521'. Received the value from a code block.
    Setting variable 'connect_str' to '''. Received the value from a code block.
    Setting variable 'connect_str' to '"(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))"'. Received the value from a code block.
    Setting variable 'system_passwd' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting variable 'ORAHOME' to 'D:\OCS_ONEBOX\mtier'. Received the value from a code block.
    Setting variable 'config2' to 'true'. Received the value from a code block.
    Setting variable 'summary_str' to 'Click 'Next' to install and configure Unified Messaging mail store , click 'Previous' to go back to the previous page .'. Received the value from a code block.
    *** ES_MAIL Password Page***
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting the 'TitleLabel' property to 'ES_MAIL Password'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'This is the password for the e-mail server schema.'.
    Setting the 'PasswordLabel' property to 'Enter Password:'.
    Setting the 'ConfirmLabel' property to 'Confirm Password:'.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'Password ( es_mail_passwd )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
    Calling Query fileQueries2.3.0.6.0 exists
    filename = D:\OCS_ONEBOX\mtier/oes/log/exists.txt
    Query Returned: false
    *** UMADMIN Password Page***
    Setting variable 'empty_input_string' to '*Protected value, not to be logged*'. Received the value from a code block.
    Setting the 'TitleLabel' property to 'UMADMIN Password'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'Enter and confirm the password for the UMADMIN user in the Internet Directory.'.
    Setting the 'PasswordLabel' property to 'Enter Password:'.
    Setting the 'ConfirmLabel' property to 'Confirm Password:'.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'Password ( umadmin_passwd )' property to '*Protected value, not to be logged*'. Received the value from the UI page.
    Setting variable 'oid_flag' to '1'. Received the value from a code block.
    *** Unified Messaging Domain Page***
    Setting the 'TitleLabel' property to 'Unified Messaging Domain'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'Prompt' property to 'Enter the name of the new Unified Messaging Domain to be created.'.
    Setting the 'TextLabel' property to 'Domain Name'.
    Setting the 'BottomDescLabel' property to 'null'.
    Setting the 'TextField ( domain_name )' property to 'oramail.exp.com'. Received the value from the UI page.
    *** Summary Page***
    Setting the 'TitleLabel' property to 'Summary'.
    Setting the 'SubTitleLabel' property to ''.
    Setting the 'InfoLabel' property to 'Click 'Next' to install and configure Unified Messaging mail store , click 'Previous' to go back to the previous page .'.
    Setting variable 'create_domain_flag' to 'true'. Received the value from a code block.
    *** Summary Page***
    Summary
    Global Settings
    Source: D:\OCS_ONEBOX\mtier\oes\config\Disk1\stage\products.jar
    Oracle Home: D:\OCS_ONEBOX\mtier (OCSHome_mid)
    Installation Type: typical
    Product Languages
    English
    Space Requirements
    C:\ Required 261KB (includes 258KB temporary) : Available 1.94GB
    D:\ Required 536KB : Available 15.16GB
    New Installations (1 products)
    UM configurator 9.0.4.1.0
    Starting install Install Phase 1 of component UM configurator
    Starting install Install Phase 2 of component UM configurator
    Initializing OUI save inventory
    Unable to read C:\Program Files\Oracle\Inventory/Contents/LibsList.ser. Some inventory information may be lost.
    Current Inventory:
         Independent Products:
              Oracle Windows System Files Fullmode 9.0.2.0.1 Development
              Oracle Windows System Files Installation 9.0.2.0.1 Development
              Java Runtime Environment 1.1.8.16.0a
              Oracle Windows System Files Verification 9.0.2.0.0 Development
         Oracle Home: OUIHome
              This Oracle Home has not been changed in this session.
         Oracle Home: OCSHome
              This Oracle Home has not been changed in this session.
         Oracle Home: OCSHome_stg
              This Oracle Home has not been changed in this session.
         Oracle Home: OCSHome_inf
              This Oracle Home has not been changed in this session.
         Oracle Home: OCSHome_mid
              Oracle Collaboration Suite 9.0.4.1.1
              Sun JDK extensions 9.0.2.0.0
              Sun JDK extensions Patch 9.0.2.3.0
              Sun JDK 1.3.1.0.2a
              Java Runtime Environment 1.4.1.3.0a
              Java Runtime Environment 1.3.1.6.0a
              Installer SDK Component 2.3.0.8.0
              Oracle Universal Installer 2.3.0.8.0
              RDBMS Required Support Files 9.0.1.4.0
              Enterprise Manager Minimal Support Files 9.0.2.0.1
              Collaboration Suite Wireless Server Management 9.0.3.2.0
              Perl Interpreter 5.6.1.0.0a
              Advanced Queueing (AQ) API 9.0.1.4.0
              XML Parser for Java 9.0.2.0.0
              Oracle Dynamic Monitoring Service 9.0.2.0.1
              Oracle Dynamic Monitoring Service Patch 9.0.2.3.0
              regexp 2.0.21.0.0
              Bali Share 1.1.17.0.0
              Oracle9i Application Server Object in OID 9.0.2.0.0
              Oracle9iAS Application Server WebCache Core to non-Core Upgrade 9.0.2.0.0
              Oracle JDBC Development Drivers 9.0.1.4.0
              JDBC Common Files 9.0.1.4.0
              JDBC/OCI Common Files 9.0.1.4.0
              Oracle Trace Required Support Files 9.0.1.0.1
              Oracle Client Required Support Files 9.0.1.4.0
              Agent Required Support Files 9.0.2.0.0a
              SSL Required Support Files 9.0.1.4.0
              LDAP Required Support Files 9.0.2.1.0
              LDAP Required Support Files Patch 9.0.2.3.0
              Parser Generator Required Support Files 9.0.1.0.0
              PL/SQL Required Support Files 9.0.1.4.0
              Oracle9iAS Application Server Core to non-Core Upgrade 9.0.2.0.0
              Repository Config Assistant 9.0.2.0.0
              XML Class Generator for Java 9.0.2.0.0
              Oracle JDBC Thin Driver for JDK 1.1 9.0.1.4.0
              Oracle Extended Windowing Toolkit 3.4.12.0.0
              Oracle Ice Browser 5.06.8.0.0
              Oracle Collaboration Suite Quick Tutorial 9.0.4.1.1
              Java Authorization 9.0.2.0.1
              Java Authorization Patch 9.0.2.3.0
              Enterprise Login Assistant 9.0.2.0.1
              Oracle JFC Extended Windowing Toolkit 4.2.6.0.0
              Oracle 9iAS Single Sign On Registration 9.0.2.0.1
              Oracle Ultra Search Common Files 9.0.3.4.0
              Oracle JDBC Thin Driver for JDK 1.2 9.0.1.4.0
              XML Parser for PL/SQL 9.0.2.0.0
              Platform Required Support Files 9.0.1.4.0
              Oracle Core Required Support Files 9.0.1.4.0
              Oracle Help For Java 3.2.12.0.0
              Extended Windowing Toolkit 3.3.18.0.0
              Oracle interMedia Java Advanced Imaging 9.0.2.0.0
              Oracle Help For Java 4.1.12.0.0
              Oracle interMedia Java Media Framework Client 9.0.2.0.0
              Oracle9i Globalization Support 9.0.1.4.0
              Oracle interMedia Java Client 9.0.2.0.0
              Oracle XML SQL Utility 9.0.1.4.0
              Oracle Net Required Support Files 9.0.1.4.0
              Precompiler Required Support Files 9.0.1.4.0
              XML Class Generator for C++ 9.0.2.0.0
              Oracle Code Editor 1.2.1.0.0A
              XDK Required Support Files 9.0.2.0.0
              XML Parser for C 9.0.2.0.0
              Java Naming and Directory Interface Libraries 1.2.1.0.0
              Oracle Dynamic Services Core 9.0.2.0.1
              Oracle Internet Directory Tools 9.0.2.1.0
              Required Support Files 9.0.1.4.0
              UM common 9.0.4.1.0
              Utilities Common Files 9.0.1.4.0
              Oracle JDBC/OCI Driver for JDK 1.2 9.0.1.4.0
              Oracle Internet Directory Client Common Files 9.0.2.1.0
              Oracle Database User Interface 2.2.11.0.0
              Oracle Ultra Search Middle-Tier 9.0.3.4.0
              Assistant Common Files 9.0.2.0.1
              XML Parser for C++ 9.0.2.0.0
              Oracle Intelligent Agent Base Component Files 9.0.2.0.0a
              Oracle Intelligent Agent 9.0.2.0.0a
              Oracle Property Inspector 4.1.8.0.0
              Oracle EMD Agent Extensions 9.0.2.0.0a
              Oracle Forms Extensions 9.0.2.0.0a
              Database SQL Scripts 9.0.1.4.0
              Oracle Applications Extensions 9.0.2.0.0a
              Oracle Collaboration Suite Release Notes 9.0.4.1.1
              Oracle Portal Data 9.0.2.2.22
              Oracle Net Configuration Assistant 9.0.1.4.0
              Enterprise Manager Translated Files 9.0.2.0.1
              Enterprise Manager Base Classes 9.0.2.0.1
              Oracle HTTP Server Extensions 9.0.2.0.0a
              Oracle Net Manager 9.0.1.4.0
              Oracle Java Portal Development Kit 9.0.2.2.22
              Oracle Portal Community Portlets 9.0.2.2.22
              Oracle9iAS Repository API 9.0.2.1.0
              Oracle JDBC/OCI Driver for JDK 1.1 9.0.1.4.0
              Oracle Java Object Cache 9.0.2.0.0
              Oracle Java Object Cache Patch 9.0.2.3.0
              Oracle Process Management Notification 9.0.2.0.0
              Oracle Process Management Notification Patch 9.0.2.3.0
              Visigenics ORB 3.4.0.0.0
              Oracle Enterprise Java Beans and CORBA Tools 9.0.1.1.1
              Oracle Dynamic Services Server 9.0.2.0.1
              Apache Configuration for EJB 9.0.1.0.1
              HTTP Server files 1.3.22.0.1a
              HTTP Server Files Patch 1.3.22.0.1d
              Oracle OC4J Module 9.0.2.0.0
              Oracle OC4J Module Patch 9.0.2.3.0
              Oracle Ultra Search Server 9.0.3.4.0
              Oracle Wallet Manager 9.0.1.4.0
              Oracle Net 9.0.1.4.0
              Oracle Java Tools 9.0.1.4.0
              Secure Socket Layer 9.0.1.4.0
              Oracle9iAS Clickstream Intelligence Common 9.0.2.2.0
              Enterprise Manager Process Utility 9.0.2.0.0
              Oracle9i Syndication Server Core 9.0.2.0.1
              Oracle Distributed Configuration Management 9.0.2.0.0
              Oracle Distributed Configuration Management Patch 9.0.2.3.0
              Enterprise Manager Encapsulated J2EE 9.0.2.0.0
              Bali Resource Translation System 2.0.5.0.0
              Oracle9i Syndication Server 9.0.2.0.1
              Oracle JDBC Drivers 9.0.1.4.0
              Oracle9iAS Mapviewer 9.0.2.0.0
              XSQL Servlet 9.0.2.0.0
              SQLJ Runtime 9.0.2.0.0
              Oracle Java Server Pages 9.0.2.0.1
              Oracle Java Server Pages Patch 9.0.2.3.0
              Oracle9iAS Containers for J2EE 9.0.2.0.1
              Oracle9iAS Containers for J2EE Patch 9.0.2.3.0
              Oracle Display Fonts 9.0.2.0.0
              Oracle UIX 2.0.21.0.0
              Oracle SOAP Client files 2.2.0.0.0b
              Oracle SOAP Client Files Patch 2.2.0.0.0e
              Oracle Help for the Web 1.0.7.0.0
              Oracle Enterprise Manager Web Site 9.0.2.0.0
              Unified Messaging EMD configuration 9.0.4.1.0
              Oracle9iAS Clickstream Intelligence Collector Agent Management 9.0.2.2.0
              BC4J Runtime Sample for Oracle9iAS 9.0.2.799.0
              Oracle Ultra Search Extension for EMD 9.0.3.4.0
              JSDK 2.0.0.0.0d
              Apache JServ 1.1.2.0.0a
              Apache JServ Patch 1.1.2.0.0d
              Discoverer Services Manager 9.0.2.39.02
              Oracle9i Delegated Administration Service 9.0.2.1.0
              Oracle9i Delegated Administration Service Patch 9.0.2.3.0
              Export/Import 9.0.1.4.0
              SQL*Loader 9.0.1.4.0
              Oracle SOAP Server 2.2.0.0.0b
              Oracle SOAP Server Patch 2.2.0.0.0e
              Oracle eBusiness Management Extensions 9.0.2.0.0a
              Apache Module for Oracle Distributed Authoring and Versioning 9.0.2.0.0
              SQL*Plus 9.0.1.4.0
              XML Transviewer Beans 9.0.2.0.0
              Reports OEM Extension 9.0.2.0.3
              Forms EMEXT 9.0.2.9.0
              Apache Configuration for Oracle Java Server Pages 9.0.2.0.0
              BC4J Runtime for Oracle9iAS 9.0.2.799.0
              Oracle9iAS Configuration for OC4J 9.0.2.0.1
              Oracle XML Runtime Components 9.0.2.0.0
              Oracle Mod PL/SQL Gateway 9.0.2.0.0
              Patch of Oracle Mod PL/SQL Gateway 9.0.2.6.0
              Oracle9iAS Web Cache 9.0.2.0.0
              Oracle9iAS Web Cache Patch 9.0.2.3.0
              Oracle Agent Extensions 9.0.2.0.0a
              Oracle Internet Directory Client 9.0.2.1.0
              Oracle Internet Directory Client Patch 9.0.2.3.0
              Apache Configuration for Oracle XML Developer's Kit 9.0.2.0.0
              Oracle Net Listener 9.0.1.4.0
              Oracle Portal Help 9.0.2.2.22
              Oracle Portal Integration with Reports 9.0.2.2.22
              Oracle Portal Configuration Assistant 9.0.2.2.22
              Oracle Portal CAT 9.0.2.2.22
              Oracle Portal Images 9.0.2.2.22
              Oracle Portal NLS 9.0.2.2.22
              Oracle Portal Common Services 9.0.2.2.22
              Oracle Portal Sitebuilder 9.0.2.2.22
              Oracle Portal Demos 9.0.2.2.22
              Oracle Portal Documentation 9.0.2.2.22
              Oracle Portal Java 9.0.2.2.22
              Oracle Portal SSO 9.0.2.2.22
              Oracle Portal Servlets 9.0.2.2.22
              Oracle Portal PLSQLToolkit 9.0.2.2.22
              Oracle Portal Utilities 9.0.2.2.22
              Oracle Portal VPD Policy 9.0.2.2.22
              Oracle9iAS Clickstream Intelligence Collector Agent 9.0.2.2.0
              Oracle9iAS Clickstream Intelligence Core 9.0.2.2.0
              Voicemail Fax Middletier 9.0.4.1.1
              BC4J Config Assistant 9.0.2.799.0
              Email Server Webmail 9.0.4.1.0
              Unified Messaging 9.0.4.1.0
              Oracle HTTP Server 9.0.2.0.0
              Oracle Portal Config Dialogs 9.0.2.2.22
              Oracle9i Application Server Core Products 9.0.2.0.0
              Oracle9i Application Server Middle Tier Products 9.0.2.0.0
              Oracle Portal Monitoring 9.0.2.2.22
              Oracle Portal Database Objects 9.0.2.2.22
              Oracle9i Application Server Instance 9.0.2.0.0
              Oracle Portal 9.0.2.2.22
              Patch of Oracle Portal 9.0.2.3.0B
              Management Tools 9.0.2.0.0
              Oracle Workflow 2.6.2.0.0
              Oracle Collaboration Suite One-offs 9.0.4.1.1
              Collaboration Suite Wireless Server 9.0.3.2.0
              Oracle Calendar application system 9.0.4.1.1
              Oracle Calendar web services 9.0.4.1.1
              Oracle Calendar SDK 9.0.4.1.0
              Oracle Sync Server 9.0.4.1.1
              Oracle Calendar web client 9.0.4.1.1
              Collaboration Suite Wireless 9.0.3.2.0
              Oracle9i Application Server 9.0.2.0.0
              Oracle Collaboration Suite Upgrade Assistant 9.0.4.1.1
              Oracle Files 9.0.4.3.0
              Oracle Calendar server 9.0.4.1.1
              Oracle Calendar administrator 9.0.4.1.1
              Oracle Calendar configuration 9.0.4.1.1
              Oracle Collaboration Suite Web Client 9.0.4.1.1
              Oracle Real-Time Collaboration Core Components 2.0.4.2.0
              UM configurator 9.0.4.1.0
    Starting to execute configuration assistants
    Launched configuration assistant 'Config MailStore'
    Tool type is: Optional.
    The command being spawned is: 'D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
    Start output from spawned process:
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    End output from spawned process.
    Invalid Exit Code. The following result code will be used for configuration assistants: 1
    Configuration assistant "Config MailStore" failed
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
    Error:*** Alert: Some of the configuration assistants failed. However these are optional assistants, so they are not required for the correct configuration of your system. If you want to try to run those assistants again, select the failed assistants and click the 'Retry' button. ***
    User Selected: Yes/OK
    Starting to execute configuration assistants
    Launched configuration assistant 'Config MailStore'
    Tool type is: Optional.
    The command being spawned is: 'D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
    Start output from spawned process:
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    End output from spawned process.
    Invalid Exit Code. The following result code will be used for configuration assistants: 1
    Configuration assistant "Config MailStore" failed
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
    Starting to execute configuration assistants
    Launched configuration assistant 'Config MailStore'
    Tool type is: Optional.
    The command being spawned is: 'D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
    Start output from spawned process:
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    End output from spawned process.
    Invalid Exit Code. The following result code will be used for configuration assistants: 1
    Configuration assistant "Config MailStore" failed
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
    The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
    Execute file D:\OCS_ONEBOX\mtier\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
    echo Config MailStore
    D:\OCS_ONEBOX\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ormail)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore ormail 1521 UM_SYSTEM D:\OCS_ONEBOX\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com
    Error:*** Alert: One or more configuration assistants have not completed successfully. However these are optional, so they are not required for the correct configuration of your system. A list of the configuration assistants that need to be run is generated in the log of this session which is located at:
    C:\Program Files\Oracle\Inventory\logs\installActions2006-02-02_01-53-52PM.log ***
    User Selected: Yes/OK
    Warning:*** Alert: Do you really want to exit? ***
    User Selected: Yes/OK
    The OUICA command is launched from D:\OCS_ONEBOX\mtier\oui\bin\ouica.bat.
    *** End of Installation Page***
    The installation of UM configurator was successful, but some optional configuration assistants failed or were canceled.

    Hi Andreas,
    I already tried your solution but still got error, this is the log file :
    Starting to execute configuration assistants
    Launched configuration assistant 'Config MailStore'
    Tool type is: Optional.
    The command being spawned is: 'D:\ocs_onebox\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore oramail.exp.com 1521 UM_SYSTEM D:\ocs_onebox\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com'
    Start output from spawned process:
    C:\TMP>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\ocs_onebox\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    End output from spawned process.
    Invalid Exit Code. The following result code will be used for configuration assistants: 1
    Configuration assistant "Config MailStore" failed
    C:\TMP>rem --- running install_mailstore.bat
    "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" "<sys_passwd>" "<system_passwd>" "<ctxsys_passwd>" 1521 UM_SYSTEM D:\ocs_onebox\mtier ora123 ora123 "<es_mail_passwd>" "<umadmin_passwd>"
    The system cannot find the path specified.
    The system cannot find the path specified.
    == was unexpected at this time.
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\ocs_onebox\mtier\oui\bin\ouica.bat.
    The following configuration assistants have not been successfully completed. These assistants must be completed for your product to be completely configured.
    Execute file D:\ocs_onebox\mtier\cfgtoollogs/configToolCommands to re-run all skipped/failed configuration assistants.
    echo Config MailStore
    D:\ocs_onebox\mtier/oes/bin/install_mailstore.bat "(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=oramail.exp.com)(PORT=1521)))(CONNECT_DATA=(SID=ocsstore)))" Protected value, not to be logged ocsstore oramail.exp.com 1521 UM_SYSTEM D:\ocs_onebox\mtier Protected value, not to be logged Protected value, not to be logged 1 oramail.exp.com
    Error:*** Alert: One or more configuration assistants have not completed successfully. However these are optional, so they are not required for the correct configuration of your system. A list of the configuration assistants that need to be run is generated in the log of this session which is located at:
    C:\Program Files\Oracle\Inventory\logs\installActions2006-02-07_06-35-23PM.log ***
    User Selected: Yes/OK
    *** End of Installation Page***
    The installation of UM configurator was successful, but some optional configuration assistants failed or were canceled.
    Warning:*** Alert: Do you really want to exit? ***
    User Selected: Yes/OK
    The OUICA command is launched from D:\ocs_onebox\mtier\oui\bin\ouica.bat.
    User Exit

  • Migration Report Errors- Failed to map index

    I am very new to oracle and databases, so my terminology is limited. Could someone explain to me what this means? And if possible, a suggestion as to how should i go about to rectify this error.
    <<<"Failed to map index :
    Column list specified is already used in an existing index. This index will not be created.">>>
    This occured when i captured the database from MySQL to OMWB during the truncation to Oracle.
    Any help will be greatly appreciated. TIA
    Andrew

    Hi Andrew,
    What this message means is that the index that is failing to create is doing so because there is no need for it. This is because there is already an index created on the same columns.
    If you need any more assistance then please e-mail [email protected]
    Regards
    John

  • The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use.  PLease try again later

    The Imap command UID copy (to deleted messages) failed for the mailbox "bulk mail" with server error UID copy mailbox in use.  PLease try again later

    What program are you using?  And what version?

  • Tech Stack Validation Fails with "Cannot map library libi.so" Error

    Hi All,
    We are in the process of upgrading one of our 11.5.8 instances to 11.5.10.2. In this process we initially upgraded the database from 8.1.7.4 to 9.2.0.7 and applied all the pre-req patches required for applying the 11.5.10.2 maintenance pack as stated in the TUMS report. This also included upgrading Developer 6i patchset from patchset 18 to patchset 27. After we applied all the pre-req patches, we again ran the TUMS utility on DB and Apps. The DB report ran fine but the apps report is erroring out with the following error message:
    453952:/u02/app/product_uat11i/8.0.6/bin/f60gen: /sbin/loader: Fatal Error: Cannot map library libig.so
    Error in detail:
    FUNCTION: TXK::Techstack::txkPrintErrorMsg [ Level 1 ]
    ERRORMSG: /u02/app/product_uat11i/8.0.6/bin/f60gen not found
    STACK TRACE
    TXK::Error::printMsg('TXK::Error','/u02/app/product_uat11i/8.0.6/bin/f60gen not found') called at /u02/app/uat11iappl/au/11.5.0/perl/TXK/Techstack.pm line 3556
    TXK::Techstack::txkPrintErrorMsg('TXK::Techstack=HASH(0x140a109e0)') called at /u02/app/uat11iappl/au/11.5.0/perl/TXK/Techstack.pm line 6215
    TXK::Techstack::_getFormsVersion('TXK::Techstack=HASH(0x140a109e0)','HASH(0x141b32c50)') called at /u02/app/uat11iappl/au/11.5.0/perl/TXK/Techstack.pm line 6149
    TXK::Techstack::txkGetFormsVersion('TXK::Techstack=HASH(0x140a109e0)','undef') called at /u02/app/uat11iappl/au/11.5.0/perl/TXK/Techstack.pm line 6518
    TXK::Techstack::txkIsFormsPS15('TXK::Techstack=HASH(0x140a109e0)') called at /u02/app/uat11iappl/au/11.5.0/perl/TXK/Validate.pm line 1001
    eval {...} called at /u02/app/uat11iappl/au/11.5.0/perl/TXK/Validate.pm line 999
    TXK::Validate::ProcessActions('TXK::Validate=HASH(0x14075d080)','HASH(0x14075ddd0)') called at /u02/app/uat11iappl/fnd/11.5.0/patch/115/bin/txkVal11510MP.pl line 206
    require /u02/app/uat11iappl/fnd/11.5.0/patch/115/bin/txkVal11510MP.pl called at /u02/app/uat11iappl/au/11.5.0/perl/TXK/RunScript.pm line 105
    TXK::RunScript::require('TXK::RunScript','/u02/app/uat11iappl/fnd/11.5.0/patch/115/bin/txkVal11510MP.pl') called at /u02/app/uat11iappl/au/11.5.0/perl/TXK/Script.pm line 177
    eval {...} called at /u02/app/uat11iappl/au/11.5.0/perl/TXK/Script.pm line 177
    TXK::Script::run('TXK::Script=HASH(0x140012b70)','/u02/app/uat11icomn/temp','/u02/app/uat11iappl/fnd/11.5.0/patch/115/bin/txkVal11510MP.pl') called at /u02/app/uat11iappl/fnd/11.5.0/patch/115/bin/TXKScript.pl line 106
    TXK:Validate:ProcessActions: Conditional method - txkIsFormsPS15 completed successfully.
    The report got generated though and is showing the status as "FAIL" for the Developer 6i version.
    We have checked the LD_LIBRARY_PATH setting and it looks good.
    Please advise.
    Thank You.

    Hi,
    This also included upgrading Developer 6i patchset from patchset 18 to patchset 27Do you mean to Developer Patchset 19?
    453952:/u02/app/product_uat11i/8.0.6/bin/f60gen: /sbin/loader: Fatal Error: Cannot map library libig.soDid you relink all executable files as mentioned in the Upgrade Developer document?
    Regards,
    Hussein

  • IBooks, Mail, After Affects, Quick Time Player, Maps, App Store, won't open after Mavericks install/update

    Just about everything on computer is slow as mollases after Mavericks Update. I am very angry because I can't use After Effects at all. It says it's not compatible with this new system. My mail application crashes as soon as I open it. Notification centre is non-existent now and Messages app won't open at all. Other apps such as iBooks, Mail, After Affects, Quick Time Player, Maps, App Store, and a few others won't open at all on this new system. I'm soo angry with Apple as I've never had so many problems with a new OS X. .. I would love to downgrade back to Mountain Lion OS. Anyone with helpful info, please respond. Thanks.

    Hi,
    From the top More Like This item
    https://discussions.apple.com/message/23487600#23487600
    7:29 pm      Sunday; October 27, 2013
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • TS3276 The IMAP command "UID COPY" (to Deleted Messages) failed for the mailbox "Bulk Mail" with server error: UID COPY Mailbox in use. Please try again later.

    I have been getting the following message and have no idea how to clear it.  Any help will be greatly appreciated!!!  I have force closed Mail, and have tried to re-sync my accounts but no luck.
    The IMAP command “UID COPY” (to Deleted Messages) failed for the mailbox “Bulk Mail” with server error: UID COPY Mailbox in use. Please try again later.

    What program are you using?  And what version?

Maybe you are looking for

  • Change of reconciliation account in vendor master

    Dear Friends, Can anybody tell whether we can change a reconciliation account in vendor master or not. If we can change then what is the procedure of changing. Regards Rahul Jain

  • Data query and insert rows performance

    We are currently getting a system developed in Unix/Weblogic/Tomcat/Oracle environment. We have developed a screen that contains 5 or 6 different parameters to select from. We could select multiple parameters in each of these selections. The idea beh

  • The this keyword

    I have a vague idea what the this keyword means. Its something to do with inheritance but I'm not sure how this works. For example I've just seen a program as shown below: import java.awt.*; import java.util.*; import java.applet.*; import java.text.

  • BPEL is not showing current Stored Proc Result.

    Hi All, I am invoking stored Procedure in BPEL. After successful testing I changed Stored Procedure logic.I again tested Stored Procedure, It is not giving results as per logic I changed. Can Any one Help On this. Regards

  • Missing images on ipad application

    Hello When a iphone app that run on my ipad is upgraded, the image on the icon disappear. This already occured for 3 apps I did uninstall and reinstall the app, nothing has changed. Same if sync or install via iTunes I'm runnnin iOS 7.1 on an ipad mi