TestDrive
Good morning,
I've requested and received mySAP TestDrive on Linux 6.10 (SAP DB 7.3). I followed the INSTALL.HTML file on cdrom, but I got a surprise. The instructions say that I should receive a rpm file for license, well I receive WAS.txt file.
How do I install the licence ?
On the other hands I tryed to start sap (without doing nothing with license file) but I got an error:
[root@nw4host root]# su - wasadm
wasadm> startsap
Starting SAP-Collector Daemon
Collector already running ... do not launch
saposcol already running
Checking WAS Database
Database is not available via /usr/sap/WAS/SYS/exe/run/R3trans -d -w
Running /usr/sap/WAS/SYS/exe/run/startdb
Trying to start database ...
Log file: /usr/sap/WAS/wasadm/startdb.log
/usr/sap/WAS/SYS/exe/run/startdb: Terminating with error code 2
wasadm> cat /usr/sap/WAS/wasadm/startdb.log
ven ott 17 13:16:19 CEST 2008
LOGFILE FOR STARTING DATABASE
Trying to start database ...
ven ott 17 13:16:19 CEST 2008
Checking required environment variables
SAPSYSTEMNAME is >WAS<
DBNAME is >WAS<
ven ott 17 13:16:19 CEST 2008
Connect to the database to check the database state
R3trans: connect check finished with return code: 12
Database not available
ven ott 17 13:16:19 CEST 2008
Starting XServer
ERROR 10107: Socket address already in use, probably a vserver is running!
ven ott 17 13:16:19 CEST 2008
Starting database
Starting Database Instance...
/usr/sap/WAS/SYS/exe/run/startdb: line 162: x_start: command not found
Opening Database...
Error -8888: SERVERDB not accessible, database not running
ven ott 17 13:16:19 CEST 2008
Connect to the database to verify the database is now open
R3trans check finished with return code: 12
ERROR: Restart of database failed
Notify Database Administrator.
/usr/sap/WAS/SYS/exe/run/startdb: Terminating with error code 2
Dear Francesco,
we are sorry for any inconvenience, but WAS is already out of support of the license program. Please use the current N4S testdrive (MaxDB version is 64bit / DB2 version is 32bit).
You can obtain the license from here: [http://www.sap.com/minisap|http://www.sap.com/minisap]
Thanks,
Hannes
Similar Messages
-
Problem with install TestDrive 2004 on Suse 9.1
I have problems with try install SAP NetWeaver 04 TESTDRIVE 2004 on Suse 9.1
The sapdb-db-files-7.5-2.i386.rpm say this.
error: unpacking of archive failed on file /sapdb/NW4/sapdata/DISKD0001;45e6dbc9: cpio: symlink failed - Imput/output error
The partition have 25GB free
I hope help
Best Regards
Alejandro.Natalia
the dbmcli -d NW4 -u control,<password> param_getvolsall not work, is possible ?
Suse-SAP1:/ # sdbregview -l
DB Analyzer /sapdb/programs 7.5.00.10 32 bit valid
Base /sapdb/programs 7.5.00.10 32 bit valid
Loader /sapdb/programs 7.5.00.10 32 bit valid
PCR 7403 /sapdb/programs 7.4.03.31 32 bit valid
PCR 7500 /sapdb/programs 7.5.00.10 32 bit valid
Server Utilities /sapdb/programs 7.5.00.10 32 bit valid
JDBC /sapdb/programs 7.5.01.00 valid
Database Kernel /sapdb/NW4/db 7.5.00.10 32 bit valid
PCR 7300 /sapdb/programs 7.3.00.46 valid
PCR 7301 /sapdb/programs 7.3.01.15 valid
ODBC /sapdb/programs 7.5.00.10 32 bit valid
Suse-SAP1:/ #
Suse-SAP1:/ #
Suse-SAP1:/ # dbmcli -s inst_enum
OK
7.5.0.10 /sapdb/NW4/db
Suse-SAP1:/ #
Suse-SAP1:/ # dbmcli -s db_enum
OK
NW4 /sapdb/NW4/db 7.5.0.10 fast running
NW4 /sapdb/NW4/db 7.5.0.10 quick offline
NW4 /sapdb/NW4/db 7.5.0.10 slow offline
Suse-SAP1:/ # dbmcli -d NW4 -u control, aksec param_getvolsall
Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
Suse-SAP1:/ #
Suse-SAP1:/ # dbmcli -d NW4 -u control,param_getvolsall
Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
Suse-SAP1:/ # dbmcli -d NW4 -u control, sapstar param_getvolsall
Error! Connection failed to node (local) for database NW4: ERR_USRFAIL: user authorization failed
Suse-SAP1:/ #
Suse-SAP1:/ # xinstinfo NW4
IndepData : /sapdb/data
IndepPrograms : /sapdb/programs
InstallationPath : /sapdb/NW4/db
Kernelversion : KERNEL 7.5.0 BUILD 010-121-066-665
Rundirectory : /sapdb/data/wrk/NW4
Suse-SAP1:/ #
Best Regards and thanks for helpppp
Very sorry, but my english is not good.
Alejandro. -
Problem on Installation of SAP NW testdrive 7 on Linux!!
Hy, i have started the installation of SAP 7 Linux testdrive but i have received this message:
unpacking sqd_env.tar.bz2
bzip2: compressed file ends unexpectedly
peraphs it is corrupted)
bzip2: Inappropriate ioctl for device
Input file = (stdin). output file =(stdout)
It is possible that the compressed file have become corrupted.
After these messages the installation has continued with unpacking other tar file.
I try to open the sqd_env.tar.bz2 but the system has sad to me that the file is corrupted.
How can i resolve this problem?
Thank's a lot.
Sincerely yours,
Andrea MaravigliaThanks for the tip - that was my problem exactly!
One of the segments didn't copy correctly and the filesize was off. I downloaded the file again and recombined them into a new .ISO file. When I mounted .ISO and restarted the install process, I immediately got past the previous sticking point. -
Sap Netweaver 4.0 testdrive on linux - impossible to connect from sapgui
Hi guys,
i've just finished to install the NW40 testdrive on a linux box, based on Redhat 9.0 distro (as requested by the equirements). At the end of installation, i have two boxes
One box with winxp sp1 called Darkstar with i.p. 192.168.100.1 and Subnet mask 255.255.0.0
The second box (with linux and NW40) called Darkmoon (prob. i was too bored to think a completly different name ) with i.p. 192.168.100.15 and subnet mask 255.255.0.0
The /etc/hosts file of the linux box contain these entries :
127.0.0.1 Darkmoon
192.168.100.15 Darkmoon.locadomain.ext
195.155.155.1 nw4host
The last line was taked from other posts found in SDN forum. I followed all the install steps and the db and the instances going-up very well, without any problem.
If i ping the two boxes, they reply each-others (from winxp to linux and vice-versa).
The "hostname" command in the linux box, return only "Darkmoon" as request by installation steps.
Now the problem.
On the winxp box i have installed sapgui 6.20. In it, I've created an entry with these information:
Description : Linux box
Application server : 192.168.100.15
System number : 00
When i try to connect with double clink on that entry, i have the following error :
Partner not reached (host 192.168.100.15, service sapdp00)
Component NI (Network interface)
Release 6.20
Ver 36
Return code -10
System call SO_ERROR
Error text : WSACONNREFUSED
Seems the boxes don't see between them.
Could be a hosts file problem on linux box???
Someone of u could give me some help ??
Could be very unhappy couln't use NW40 just for a little error.
Thx a lot for all your hints and suggestions
AndreaHi Gregor,
thx a lot for your interest in my problem.
The firts answer is yes, i've started the instance with the command "startsap", and the instance comes up.
I can see the processed with ps -ef .
Here the log of ifconfig :
eth0 Link encap:Ethernet HWaddr 00:0C:29:5E:D9:84
inet addr:192.168.100.15 Bcast:192.168.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4525 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:336907 (329.0 Kb) TX bytes:168 (168.0 b)
Interrupt:10 Base address:0x1080
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:700 (700.0 b) TX bytes:700 (700.0 b)
Another thing .
The command traceroute in each box works, and shows the right path.
Thx a lot for every information u would give me .
Andrea -
Error while Installing SAP NetWeaver Testdrive sr1 in Fedora 7
I am getting problen while Installing SAP NetWeaver Testdrive sr1 in Fedora 7
I need to install SAP Web Application Server 6.4 ,SAP NetWeaver Developer Studio,MAXDB7.5 in Fedora Core
The package sapj2ee-srv-sapdb-6.40-2 is already installed.
The package sapdb-7.5-2 is already installed.
The package sapdb-db-log-7.5-2 is already installed.
The package sapdb-db-files-7.5-2 is already installed.
Found interface: eth8 . Alias is eth8:0
ifconfig eth8:0 195.155.155.1 up
LD_LIBRARY_PATH: Undefined variable.
rm: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
/sapdb/programs/bin/xuser: error while loading shared libraries: libdl.so.2: cannot open shared object file: No such file or directory
[: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
Can u suggest what I need to do ? do I have to install any rpmHi Debashis Mallick,
it seems the program xuser need the libraries libdl.so.2 and libc.so.6 and don't find it.
Both are in package glibc-2.6.x. ,maybe your have Version < 2.6 installed?
Regards
Andreas Filzer -
NW04 + MAXdb testdrive on SLES10, startsap nw4host failed
Hi all,
i am trying this SAP's product, i have experienced some problems,
the first
the installation failed because the install.sh script set the wrong path to .cshrc of nw4adm
solution:
copy the dvd on the hard disk then modify the install scirpt
[code]
update_cshrc () {
do_redhat_specific
vv=`find ${installed_jdk_home} -name 'libjvm.so'`
if [ -n "$" ]; then
vv1=`echo -e "$" | grep 'server/libjvm.so$'`
if [ -z "$" ]; then
vv1=`echo -e $ | head -n 1`
fi
vv2=`echo -e $ | sed -e 's@/server/libjvm.so$@@g'`
vv3=`echo -e $ | sed -e 's@/libjvm.so$@@g'`
add_to_file "setenv LD_LIBRARY_PATH \$:$:$:/usr/lib:/lib" ~nw4adm/.cshrc
else
echo ""
to-do error no libjvm.so found / inconsistent JVM installation
fi
add_to_file "# setenv LD_ASSUME_KERNEL 2.4.1" ~nw4adm/.cshrc
[/code]
without this fix the nw4adm havent the library path in its environment and the install.sh was unable to create xuser.
but now i'm experiencing another problem, i cant start my testdrive
[code]
nw4host:nw4adm 7> startsap nw4host
Checking ADA db Database
ABAP Database is not available via R3trans
Checking ADA db Database
Error: java.io.FileNotFoundException: JdbcCon.log (Permission denied)
J2EE Database is not available via test
See logfile JdbcCon.log
Starting SAP-Collector Daemon
This is Saposcol Version COLL 20.85 04/03/01 640 - V1.12 for Linux
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
Starting collector (create new process)
could not move /usr/sap/tmp/dev_coll to /usr/sap/tmp/dev_coll.old
saposcol on host tron started
Running /usr/sap/NW4/SYS/exe/run/startdb
Trying to start database ...
Log file: /sapmnt/home/nw4adm/startdb.log
Database start failed
DB startup failed
[/code]
this is the startdb.log
[code]nw4host:nw4adm 8> cat /sapmnt/home/nw4adm/startdb.log
Fri Jun 29 13:23:09 CEST 2007
LOGFILE FOR STARTING DATABASE
Trying to start database ...
Fri Jun 29 13:23:09 CEST 2007
Checking required environment variables
SAPSYSTEMNAME is >NW4<
Start database with xuserkey >c<
Fri Jun 29 13:23:09 CEST 2007
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
Fri Jun 29 13:23:09 CEST 2007
Starting XServer
12798 NISERVER server started.
12902 XSERVER started, 'X32/LINUX 7.5.0 Build 010-121-066-665'
Fri Jun 29 13:23:09 CEST 2007
Starting database
Starting Database Instance...
ERR
-24994,ERR_RTE: runtime environment error
1,Check knldiag! Kernel died before reaching ADMIN state
Opening Database...
ERR
-24994,ERR_RTE: runtime environment error
1,Check knldiag! Kernel died before reaching ADMIN state
Fri Jun 29 13:23:18 CEST 2007
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed
nw4host:nw4adm 9>
[/code]
this is the JdbcCon.log
[code]nw4host:nw4adm 12> cat JdbcCon.log
Start: Thu Jun 28 23:55:30 CEST 2007
Error: Couldn't connect to DB
com.sap.dbtech.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: Cannot connect to jdbc:sapdb://nw4host/NW4 [Reply is garbled.].
nw4host:nw4adm 13> [/code]
here some files, the owner is root
[code]nw4host:nw4adm 13> ls -altr | grep root
-rwxrwxr-x 1 root root 757520 2004-04-07 22:35 dsrlib.so
-rwxrwxr-x 1 root root 7875161 2004-04-07 23:22 sapccmsr
-rwxr-xr-x 1 root sapsys 528204 2004-05-02 20:12 saposcol
-rwxr-x--- 1 root sapsys 107 2004-06-01 11:44 license_F1457087767
-rwxrr 1 root root 4730 2004-08-19 06:37 jdbcconnect.jar
nw4host:nw4adm 14> pwd
/sapmnt/NW4/exe
[/code]
the knldia
[code]----
Date Time TID Typ MsgID Label Message-Text
2007-06-29 13:23:14 12059 WNG 11489 PARAM Open system console '/dev/console' reports (13) Permission denied
2007-06-29 13:23:14 12059 WNG 11489 PARAM Modify parameter OPMSG1 or enable write access to prevent this message
2007-06-29 13:23:14 12059 12841 DIAGHIST Backup of diagnostic files is in progress
2007-06-29 13:23:14 12059 12842 DIAGHIST Backup of diagnostic files has finished
2007-06-29 13:23:14 12059 12769 INFO Starting SERVERDB: 'NW4'
2007-06-29 13:23:14 12059 12770 INFO SERVERNODE: 'tron'
2007-06-29 13:23:14 12059 12773 INFO Date: 2007-06-29
2007-06-29 13:23:14 12059 12771 INFO Process ID: 12059
2007-06-29 13:23:14 12059 12772 INFO Owner: 'sdb'
2007-06-29 13:23:14 12059 12772 INFO Group: 'sdba'
2007-06-29 13:23:14 12059 12781 INFO Version: '32BIT Kernel'
2007-06-29 13:23:14 12059 12781 INFO Version: 'X32/LINUX 7.5.0 Build 010-121-066-665'
2007-06-29 13:23:14 12059 12780 INFO DBROOT: '/sapdb/data/wrk/NW4'
2007-06-29 13:23:14 12059 12780 INFO LD_LIBRARY_PATH: '/sapdb/NW4/db/lib:/sapdb/NW4/db/sap'
2007-06-29 13:23:14 12059 12932 INFO maximum cpu time: unlimited
2007-06-29 13:23:14 12059 12933 INFO maximum number of processes: 0 MB
2007-06-29 13:23:14 12059 12891 INFO maximum core size: 0 MB
2007-06-29 13:23:14 12059 12892 INFO maximum number of open files: 1024
2007-06-29 13:23:14 12059 12934 INFO maximum file size: unlimited
2007-06-29 13:23:14 12059 12895 INFO maximum number of threads: unlimited
2007-06-29 13:23:14 12059 12935 INFO maximum stack size: 8 MB
2007-06-29 13:23:14 12059 12936 INFO lockable memory size: 0 MB
2007-06-29 13:23:14 12059 12893 INFO maximum virtual memory size: unlimited
2007-06-29 13:23:14 12059 12937 INFO resident set size size: unlimited
2007-06-29 13:23:14 12059 12894 INFO maximum heap size: unlimited
2007-06-29 13:23:14 12059 12898 ENVIRON Environment dump start
2007-06-29 13:23:14 12059 12898 ENVIRON LESSKEY=/etc/lesskey.bin
2007-06-29 13:23:14 12059 12898 ENVIRON NNTPSERVER=news
2007-06-29 13:23:14 12059 12898 ENVIRON INFODIR=/usr/local/info:/usr/share/info:
2007-06-29 13:23:14 12059 12898 ENVIRON /usr/info
2007-06-29 13:23:14 12059 12898 ENVIRON MANPATH=/usr/local/man:/usr/share/man:/u
2007-06-29 13:23:14 12059 12898 ENVIRON sr/X11R6/man:/opt/gnome/share/man
2007-06-29 13:23:14 12059 12898 ENVIRON DIR_LIBRARY=/usr/sap/NW4/SYS/exe/run
2007-06-29 13:23:14 12059 12898 ENVIRON KDE_MULTIHEAD=false
2007-06-29 13:23:14 12059 12898 ENVIRON HOSTNAME=nw4host
2007-06-29 13:23:14 12059 12898 ENVIRON DM_CONTROL=/var/run/xdmctl
2007-06-29 13:23:14 12059 12898 ENVIRON GNOME2_PATH=/usr/local:/opt/gnome:/usr
2007-06-29 13:23:14 12059 12898 ENVIRON XKEYSYMDB=/usr/X11R6/lib/X11/XKeysymDB
2007-06-29 13:23:14 12059 12898 ENVIRON SAPDBHOST=nw4host
2007-06-29 13:23:14 12059 12898 ENVIRON dbms_type=ADA
2007-06-29 13:23:14 12059 12898 ENVIRON HOST=tron
2007-06-29 13:23:14 12059 12898 ENVIRON SHELL=/bin/csh
2007-06-29 13:23:14 12059 12898 ENVIRON TERM=xterm
2007-06-29 13:23:14 12059 12898 ENVIRON PROFILEREAD=true
2007-06-29 13:23:14 12059 12898 ENVIRON HISTSIZE=1000
2007-06-29 13:23:14 12059 12898 ENVIRON XDM_MANAGED=/var/run/xdmctl/xdmctl-:0,rs
2007-06-29 13:23:14 12059 12898 ENVIRON vd,method=classic
2007-06-29 13:23:14 12059 12898 ENVIRON GTK2_RC_FILES=/etc/opt/gnome/gtk-2.0/gtk
2007-06-29 13:23:14 12059 12898 ENVIRON rc:/home/utente/.gtkrc-2.0-qtengine:/hom
2007-06-29 13:23:14 12059 12898 ENVIRON e/utente/.gtkrc-2.0:/home/utente/.kde/sh
2007-06-29 13:23:14 12059 12898 ENVIRON are/config/gtkrc-2.0
2007-06-29 13:23:14 12059 12898 ENVIRON GTK_RC_FILES=/etc/opt/gnome/gtk/gtkrc:/h
2007-06-29 13:23:14 12059 12898 ENVIRON ome/utente/.gtkrc:/home/utente/.kde/shar
2007-06-29 13:23:14 12059 12898 ENVIRON e/config/gtkrc
2007-06-29 13:23:14 12059 12898 ENVIRON GS_LIB=/home/utente/.fonts
2007-06-29 13:23:14 12059 12898 ENVIRON WINDOWID=27262983
2007-06-29 13:23:14 12059 12898 ENVIRON MORE=-sl
2007-06-29 13:23:14 12059 12898 ENVIRON DBNAME=nw4host:ADA db
2007-06-29 13:23:14 12059 12898 ENVIRON XSESSION_IS_UP=yes
2007-06-29 13:23:14 12059 12898 ENVIRON KDE_FULL_SESSION=true
2007-06-29 13:23:14 12059 12898 ENVIRON GROFF_NO_SGR=yes
2007-06-29 13:23:14 12059 12898 ENVIRON USER=nw4adm
2007-06-29 13:23:14 12059 12898 ENVIRON GROUP=sapsys
2007-06-29 13:23:14 12059 12898 ENVIRON LS_COLORS=no=00:fi=00:di=01;34:ln=00;36:
2007-06-29 13:23:14 12059 12898 ENVIRON pi=40;33:so=01;35:do=01;35:bd=40;33;01:c
2007-06-29 13:23:14 12059 12898 ENVIRON d=40;33;01:or=41;33;01:ex=00;32:*.cmd=00
2007-06-29 13:23:14 12059 12898 ENVIRON ;32:.exe=01;32:.com=01;32:*.bat=01;32:
2007-06-29 13:23:14 12059 12898 ENVIRON .btm=01;32:.dll=01;32:.tar=00;31:.tb
2007-06-29 13:23:14 12059 12898 ENVIRON z=00;31:.tgz=00;31:.rpm=00;31:*.deb=00
2007-06-29 13:23:14 12059 12898 ENVIRON ;31:.arj=00;31:.taz=00;31:*.lzh=00;31:
2007-06-29 13:23:14 12059 12898 ENVIRON .zip=00;31:.zoo=00;31:.z=00;31:.Z=00
2007-06-29 13:23:14 12059 12898 ENVIRON ;31:.gz=00;31:.bz2=00;31:.tb2=00;31:
2007-06-29 13:23:14 12059 12898 ENVIRON .tz2=00;31:.tbz2=00;31:.avi=01;35:*.bm
2007-06-29 13:23:14 12059 12898 ENVIRON p=01;35:.fli=01;35:.gif=01;35:*.jpg=01
2007-06-29 13:23:14 12059 12898 ENVIRON ;35:.jpeg=01;35:.mng=01;35:*.mov=01;35
2007-06-29 13:23:14 12059 12898 ENVIRON :.mpg=01;35:.pcx=01;35:.pbm=01;35:.p
2007-06-29 13:23:14 12059 12898 ENVIRON gm=01;35:.png=01;35:.ppm=01;35:*.tga=0
2007-06-29 13:23:14 12059 12898 ENVIRON 1;35:.tif=01;35:.xbm=01;35:*.xpm=01;35
2007-06-29 13:23:14 12059 12898 ENVIRON :.dl=01;35:.gl=01;35:.wmv=01;35:.aif
2007-06-29 13:23:14 12059 12898 ENVIRON f=00;32:.au=00;32:.mid=00;32:*.mp3=00;
2007-06-29 13:23:14 12059 12898 ENVIRON 32:.ogg=00;32:.voc=00;32:*.wav=00;32:
2007-06-29 13:23:14 12059 12898 ENVIRON DESKTOP_LAUNCH=kde-open
2007-06-29 13:23:14 12059 12898 ENVIRON OPENWINHOME=/usr/openwin
2007-06-29 13:23:14 12059 12898 ENVIRON XNLSPATH=/usr/X11R6/lib/X11/nls
2007-06-29 13:23:14 12059 12898 ENVIRON ENV=/etc/bash.bashrc
2007-06-29 13:23:14 12059 12898 ENVIRON HOSTTYPE=i586-linux
2007-06-29 13:23:14 12059 12898 ENVIRON SESSION_MANAGER=local/tron:/tmp/.ICE-uni
2007-06-29 13:23:14 12059 12898 ENVIRON x/3917
2007-06-29 13:23:14 12059 12898 ENVIRON FROM_HEADER=
2007-06-29 13:23:14 12059 12898 ENVIRON PAGER=less
2007-06-29 13:23:14 12059 12898 ENVIRON CSHEDIT=emacs
2007-06-29 13:23:14 12059 12898 ENVIRON XDG_CONFIG_DIRS=/usr/local/etc/xdg/:/etc
2007-06-29 13:23:14 12059 12898 ENVIRON /xdg/:/etc/opt/gnome/xdg/
2007-06-29 13:23:14 12059 12898 ENVIRON KONSOLE_DCOP=DCOPRef(konsole-3950,konsol
2007-06-29 13:23:14 12059 12898 ENVIRON e)
2007-06-29 13:23:14 12059 12898 ENVIRON MINICOM=-c on
2007-06-29 13:23:14 12059 12898 ENVIRON MAIL=/var/spool/mail/utente
2007-06-29 13:23:14 12059 12898 ENVIRON PATH=/sapdb/NW4/db/bin:/sapdb/programs/b
2007-06-29 13:23:14 12059 12898 ENVIRON in:/sapdb/programs/bin:/usr/lib/java/bin
2007-06-29 13:23:14 12059 12898 ENVIRON :.:/sapmnt/home/nw4adm:/usr/sap/NW4/SYS/
2007-06-29 13:23:14 12059 12898 ENVIRON exe/runU:/usr/sap/NW4/SYS/exe/run:/home/
2007-06-29 13:23:14 12059 12898 ENVIRON utente/bin:/usr/local/bin:/usr/bin:/usr/
2007-06-29 13:23:14 12059 12898 ENVIRON X11R6/bin:/bin:/usr/games:/opt/gnome/bin
2007-06-29 13:23:14 12059 12898 ENVIRON :/opt/kde3/bin:/usr/lib/mit/bin:/usr/lib
2007-06-29 13:23:14 12059 12898 ENVIRON /mit/sbin
2007-06-29 13:23:14 12059 12898 ENVIRON DESKTOP_SESSION=default
2007-06-29 13:23:14 12059 12898 ENVIRON CPU=i686
2007-06-29 13:23:14 12059 12898 ENVIRON KONSOLE_DCOP_SESSION=DCOPRef(konsole-395
2007-06-29 13:23:14 12059 12898 ENVIRON 0,session-1)
2007-06-29 13:23:14 12059 12898 ENVIRON INPUTRC=/home/utente/.inputrc
2007-06-29 13:23:14 12059 12898 ENVIRON PWD=/home/utente
2007-06-29 13:23:14 12059 12898 ENVIRON XMODIFIERS=@im=local
2007-06-29 13:23:14 12059 12898 ENVIRON JAVA_HOME=/usr/lib/java
2007-06-29 13:23:14 12059 12898 ENVIRON LANG=en_US.UTF-8
2007-06-29 13:23:14 12059 12898 ENVIRON PYTHONSTARTUP=/etc/pythonstart
2007-06-29 13:23:14 12059 12898 ENVIRON SAPSYSTEMNAME=NW4
2007-06-29 13:23:14 12059 12898 ENVIRON TEXINPUTS=:/home/utente/.TeX:/usr/share/
2007-06-29 13:23:14 12059 12898 ENVIRON doc/.TeX:/usr/doc/.TeX
2007-06-29 13:23:14 12059 12898 ENVIRON QT_SYSTEM_DIR=/usr/share/desktop-data
2007-06-29 13:23:14 12059 12898 ENVIRON HOME=/sapmnt/home/nw4adm
2007-06-29 13:23:14 12059 12898 ENVIRON SHLVL=5
2007-06-29 13:23:14 12059 12898 ENVIRON LESS_ADVANCED_PREPROCESSOR=no
2007-06-29 13:23:14 12059 12898 ENVIRON OSTYPE=linux
2007-06-29 13:23:14 12059 12898 ENVIRON LS_OPTIONS=-N --color=tty -T 0
2007-06-29 13:23:14 12059 12898 ENVIRON XCURSOR_THEME=crystalwhite
2007-06-29 13:23:14 12059 12898 ENVIRON WINDOWMANAGER=/usr/X11R6/bin/kde
2007-06-29 13:23:14 12059 12898 ENVIRON GTK_PATH=/usr/local/lib/gtk-2.0:/opt/gno
2007-06-29 13:23:14 12059 12898 ENVIRON me/lib/gtk-2.0:/usr/lib/gtk-2.0
2007-06-29 13:23:14 12059 12898 ENVIRON VENDOR=suse
2007-06-29 13:23:14 12059 12898 ENVIRON G_FILENAME_ENCODING=@locale,UTF-8,ISO-88
2007-06-29 13:23:14 12059 12898 ENVIRON 59-15,CP1252
2007-06-29 13:23:14 12059 12898 ENVIRON LESS=-M -I
2007-06-29 13:23:14 12059 12898 ENVIRON MACHTYPE=i586
2007-06-29 13:23:14 12059 12898 ENVIRON LOGNAME=nw4adm
2007-06-29 13:23:14 12059 12898 ENVIRON CVS_RSH=ssh
2007-06-29 13:23:14 12059 12898 ENVIRON XDG_DATA_DIRS=/usr/local/share/:/usr/sha
2007-06-29 13:23:14 12059 12898 ENVIRON re/:/etc/opt/kde3/share/:/opt/kde3/share
2007-06-29 13:23:14 12059 12898 ENVIRON /:/opt/gnome/share/
2007-06-29 13:23:14 12059 12898 ENVIRON ACLOCAL_FLAGS=-I /opt/gnome/share/acloca
2007-06-29 13:23:14 12059 12898 ENVIRON l
2007-06-29 13:23:14 12059 12898 ENVIRON PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
2007-06-29 13:23:14 12059 12898 ENVIRON :/usr/local/share/pkgconfig:/usr/lib/pkg
2007-06-29 13:23:14 12059 12898 ENVIRON config:/usr/share/pkgconfig:/opt/kde3/li
2007-06-29 13:23:14 12059 12898 ENVIRON b/pkgconfig:/opt/gnome/lib/pkgconfig:/op
2007-06-29 13:23:14 12059 12898 ENVIRON t/gnome/lib/pkgconfig:/opt/gnome/share/p
2007-06-29 13:23:14 12059 12898 ENVIRON kgconfig
2007-06-29 13:23:14 12059 12898 ENVIRON LESSOPEN=lessopen.sh %s
2007-06-29 13:23:14 12059 12898 ENVIRON USE_FAM=
2007-06-29 13:23:14 12059 12898 ENVIRON INFOPATH=/usr/local/info:/usr/share/info
2007-06-29 13:23:14 12059 12898 ENVIRON :/usr/info:/opt/gnome/share/info
2007-06-29 13:23:14 12059 12898 ENVIRON DISPLAY=:0
2007-06-29 13:23:14 12059 12898 ENVIRON SAPJDBHOST=nw4host
2007-06-29 13:23:14 12059 12898 ENVIRON XAUTHLOCALHOSTNAME=tron
2007-06-29 13:23:14 12059 12898 ENVIRON LESSCLOSE=lessclose.sh %s %s
2007-06-29 13:23:14 12059 12898 ENVIRON G_BROKEN_FILENAMES=1
2007-06-29 13:23:14 12059 12898 ENVIRON COLORTERM=
2007-06-29 13:23:14 12059 12898 ENVIRON XAUTHORITY=/sapmnt/home/nw4adm/.xauthNeq
2007-06-29 13:23:14 12059 12898 ENVIRON DZQ
2007-06-29 13:23:14 12059 12898 ENVIRON =/sapdb/programs/bin/xserver
2007-06-29 13:23:14 12059 12898 ENVIRON DBROOT=/sapdb/NW4/db
2007-06-29 13:23:14 12059 12898 ENVIRON LD_LIBRARY_PATH=/sapdb/NW4/db/lib:/sapdb
2007-06-29 13:23:14 12059 12898 ENVIRON /NW4/db/sap
2007-06-29 13:23:14 12059 12898 ENVIRON SERVERDB=NW4
2007-06-29 13:23:14 12059 12898 ENVIRON Environment dump completed
2007-06-29 13:23:14 12059 12883 DBSTATE Core dump suppressed
2007-06-29 13:23:14 12059 202 RTE Memory allocation not limited
2007-06-29 13:23:14 12059 203 RTE System page cache usage enabled
2007-06-29 13:23:14 12059 12928 TASKING Using threads for tasks
2007-06-29 13:23:14 12059 11532 init_shm SHMCHUNK size 0x2000000
2007-06-29 13:23:14 12059 12692 TCLUSTER tw;al;ut;2000sv,100bup;10ev,10gc;ti,100dw;30000us;compress
2007-06-29 13:23:14 12059 12693 TCLUSTER number of 'BUP': 0
2007-06-29 13:23:14 12059 12693 TCLUSTER number of ' DW': 16
2007-06-29 13:23:14 12059 12693 TCLUSTER number of ' US': 50
2007-06-29 13:23:14 12059 12693 TCLUSTER number of ' SV': 21
2007-06-29 13:23:14 12059 12693 TCLUSTER number of ' EV': 1
2007-06-29 13:23:14 12059 12693 TCLUSTER number of ' GC': 0
2007-06-29 13:23:14 12059 11533 init_shm creating shared section size 513004
2007-06-29 13:23:14 12059 12698 IPC Common RTE specific IPC key: 0x44000000
2007-06-29 13:23:14 12059 11536 init_shm attached shared section at 0x50000000
2007-06-29 13:23:14 12059 11537 init_shm shared section ends at 0x5007D3EC
2007-06-29 13:23:15 12059 11521 PIPE_IO Operating system does not support fstat for input check of pipes
2007-06-29 13:23:15 12059 11522 PIPE_IO Input check for pipe with poll supported
2007-06-29 13:23:16 12059 12811 EVENTING Suppressing output to 'knldiag.evt' 0 pages
2007-06-29 13:23:16 12059 12812 EVENTING Eventbuffer 1 events 100 tasks
2007-06-29 13:23:16 12059 12815 EVENTING No AliveEvent generation
2007-06-29 13:23:17 12061 12885 MEMORY 25805 Pages allocated for I/O cache
2007-06-29 13:23:17 12061 12886 TASKING Maximum non user task stack size 100KB
2007-06-29 13:23:17 12061 12886 TASKING Maximum task stack size 400KB
2007-06-29 13:23:17 12061 12886 TASKING Task stack at system choosen address
2007-06-29 13:23:17 12061 12886 TASKING Allocating task stack chunk for 92 tasks
2007-06-29 13:23:17 12061 12886 TASKING Maximum single aligned task stack size 400KB
2007-06-29 13:23:17 12061 12886 TASKING Size of single task guard area 4KB
2007-06-29 13:23:17 12061 12886 TASKING Task stack chunk area [ 0xa949c000 - 0xaace4fff ]
2007-06-29 13:23:17 12061 12886 TASKING Physical memory used for task stacks 24500KB
2007-06-29 13:23:17 12061 12886 TASKING Physical memory used for guard areas 372KB
2007-06-29 13:23:17 12061 12831 TRACE_IO Configured MAXMESSAGE_FILES:0
2007-06-29 13:23:17 12061 12832 TRACE_IO Disabled: No TraceMessagefiles wanted
2007-06-29 13:23:17 0 12853 DBSTATE Caught signal 11(SIGSEGV)
2007-06-29 13:23:17 0 ERR 11330 COREHAND ABORTING due to signal 11
2007-06-29 13:23:17 0 ERR 11599 BTRACE -
> Emergency Stack Back Trace <----
2007-06-29 13:23:17 0 ERR 11599 BTRACE (0):0xb7d8c049 [0xbfcc18cc](0x1,0xe,0xbfcc194c,0x865e661)
2007-06-29 13:23:17 0 ERR 11599 BTRACE (1):0xb7ecec66 [0xbfcc18cc](0x1,0xe,0xbfcc194c,0x865e661)
2007-06-29 13:23:17 0 ERR 11599 BTRACE (3):0x865e661 [0xbfcc18dc](0xbfcc1928,0xa949b000,0xbfcc194c,0x865e653)
2007-06-29 13:23:17 0 ERR 11599 BTRACE (5):0x865e840 [0xbfcc194c](0x20000,0x0,0x8655464,0x0)
2007-06-29 13:23:17 0 ERR 11599 BTRACE (7):0x869a412 [0xbfcc198c](0x20000,0x8655464,0x0,0x1)
2007-06-29 13:23:17 0 ERR 11599 BTRACE (9):0x869b24a [0xbfcc19fc](0x0,0x0,0xbfcc1a2c,0x869b204)
2007-06-29 13:23:17 0 ERR 11599 BTRACE (11):0x8148429 [0xbfcc1a2c](0xbfcc1b14,0xbfcc1a48,0xbfcc1a6c,0x814841d)
2007-06-29 13:23:17 0 ERR 11599 BTRACE (13):0x869974c [0xbfcc1a6c](0xbfcc1b14,0xbfcc1ae8,0xbfcc1a88,0xb7ed5234)
2007-06-29 13:23:17 0 ERR 11599 BTRACE (15):0x81483ee [0xbfcc1b48](0x2,0xbfcc1c04,0xbfcc1c10,0x814740a)
2007-06-29 13:23:17 0 ERR 11599 BTRACE (17):0xb7d3c87c [0xbfcc1b78](0x2,0xbfcc1c04,0xbfcc1c10,0xb7efa24d)
2007-06-29 13:23:17 0 ERR 11599 BTRACE -
> Register Dump <----
2007-06-29 13:23:17 0 ERR 11599 BTRACE -
2007-06-29 13:23:17 0 ERR 11599 BTRACE ds es 0x0000007b 0xc010007b
2007-06-29 13:23:17 0 ERR 11599 BTRACE fs gs 0x00000000 0x00000033
2007-06-29 13:23:17 0 ERR 11599 BTRACE trap err 0x0000000d 0x00000000
2007-06-29 13:23:17 0 ERR 11599 BTRACE efl ss 0x00210202 0x0000007b
2007-06-29 13:23:17 0 ERR 11599 BTRACE edi esi 0x00000001 0x00000001
2007-06-29 13:23:17 0 ERR 11599 BTRACE eax ebx 0xfffffff9
2007-06-29 13:23:17 0 ERR 11599 BTRACE ecx edx 0xa947abe0
2007-06-29 13:23:17 0 ERR 11599 BTRACE esp uesp 0xbfcc18b8 0xbfcc18b8
2007-06-29 13:23:17 0 ERR 11599 BTRACE ebp eip 0xbfcc18cc 0xb7d8c049
2007-06-29 13:23:17 0 ERR 11599 BTRACE cs cr2 0x00000073 0x00000000
2007-06-29 13:23:17 0 ERR 11599 BTRACE -
2007-06-29 13:23:17 0 ERR 11599 BTRACE Floating point register unused
2007-06-29 13:23:17 0 ERR 11599 BTRACE -
2007-06-29 13:23:17 0 ERR 11599 BTRACE -
> Module List <----
2007-06-29 13:23:17 0 ERR 11599 BTRACE |.text Start |.text End | Module File Name
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0x08048000 | 0x087f0000 | /sapdb/NW4/db/pgm/kernel
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0xa8c5e000 | 0xa8c68000 | /lib/libgcc_s.so.1
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0xb7d27000 | 0xb7e41000 | /lib/libc-2.4.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0xb7e41000 | 0xb7e43000 | /lib/libc-2.4.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0xb7e48000 | 0xb7e6b000 | /lib/libm-2.4.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0xb7e6e000 | 0xb7ea8000 | /usr/lib/libstdc++-3-libc6.2-2-2.10.0.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0xb7ebb000 | 0xb7ec2000 | /lib/librt-2.4.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0xb7ec4000 | 0xb7ec6000 | /lib/libdl-2.4.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0xb7ec8000 | 0xb7ed7000 | /lib/libpthread-2.4.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE | 0xb7eed000 | 0xb7f07000 | /lib/ld-2.4.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE
2007-06-29 13:23:17 0 ERR 11599 BTRACE -
> Symbolic Stack Back Trace <----
2007-06-29 13:23:17 0 ERR 11599 BTRACE 0: 0xb7d8c049 __cfree +0x0049
2007-06-29 13:23:17 0 ERR 11599 BTRACE /lib/libc-2.4.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE Frameinfo [0xbfcc18cc] (0x1,0xe,0xbfcc194c,0x865e661)
2007-06-29 13:23:17 0 ERR 11599 BTRACE 1: 0xb7ecec66 __pthread_attr_destroy +0x0026
2007-06-29 13:23:17 0 ERR 11599 BTRACE /lib/libpthread-2.4.so
2007-06-29 13:23:17 0 ERR 11599 BTRACE Frameinfo [0xbfcc18cc] (0x1,0xe,0xbfcc194c,0x865e661)
2007-06-29 13:23:17 0 ERR 11599 BTRACE 2: 0x0865e661 eo07_CreateThread +0x01f9
2007-06-29 13:23:17 0 ERR 11599 BTRACE /sapdb/NW4/db/pgm/kernel
2007-06-29 13:23:17 0 ERR 11599 BTRACE Frameinfo [0xbfcc18dc] (0xbfcc1928,0xa949b000,0xbfcc194c,0x865e653)
2007-06-29 13:23:17 0 ERR 11599 BTRACE 3: 0x0865e840 sqlbeginthread +0x002c
2007-06-29 13:23:17 0 ERR 11599 BTRACE /sapdb/NW4/db/pgm/kernel
2007-06-29 13:23:17 0 ERR 11599 BTRACE Frameinfo [0xbfcc194c] (0x20000,0x0,0x8655464,0x0)
2007-06-29 13:23:17 0 ERR 11599 BTRACE 4: 0x0869a412 en81_CreateRteProcs +0x0032
2007-06-29 13:23:17 0 ERR 11599 BTRACE /sapdb/NW4/db/pgm/kernel
2007-06-29 13:23:17 0 ERR 11599 BTRACE Frameinfo [0xbfcc198c] (0x20000,0x8655464,0x0,0x1)
2007-06-29 13:23:17 0 ERR 11599 BTRACE 5: 0x0869b24a en81RunKernel +0x00d6
2007-06-29 13:23:17 0 ERR 11599 BTRACE /sapdb/NW4/db/pgm/kernel
2007-06-29 13:23:17 0 ERR 11599 BTRACE Frameinfo [0xbfcc19fc] (0x0,0x0,0xbfcc1a2c,0x869b204)
2007-06-29 13:23:17 0 ERR 11599 BTRACE 6: 0x08148429 en80RunKernel +0x002d
2007-06-29 13:23:17 0 ERR 11599 BTRACE /sapdb/NW4/db/pgm/kernel
2007-06-29 13:23:17 0 ERR 11599 BTRACE Frameinfo [0xbfcc1a2c] (0xbfcc1b14,0xbfcc1a48,0xbfcc1a6c,0x814841d)
2007-06-29 13:23:17 0 ERR 11599 BTRACE 7: 0x0869974c en81_kernel_main +0x051c
2007-06-29 13:23:17 0 ERR 11599 BTRACE /sapdb/NW4/db/pgm/kernel
2007-06-29 13:23:17 0 ERR 11599 BTRACE Frameinfo [0xbfcc1a6c] (0xbfcc1b14,0xbfcc1ae8,0xbfcc1a88,0xb7ed5234)
2007-06-29 13:23:17 0 ERR 11599 BTRACE 8: 0x081483ee main +0x004e
2007-06-29 13:23:17 0 ERR 11599 BTRACE /sapdb/NW4/db/pgm/kernel
2007-06-29 13:23:17 0 ERR 11599 BTRACE Frameinfo [0xbfcc1b48] (0x2,0xbfcc1c04,0xbfcc1c10,0x814740a)
2007-06-29 13:23:17 0 ERR 11599 BTRACE -
> End of Stack Back Trace <----
2007-06-29 13:23:17 0 ERR 11599 BTRACE analysing LVCMem_Allocator_1
2007-06-29 13:23:17 0 ERR 11599 BTRACE
2007-06-29 13:23:17 0 ERR 11599 BTRACE no problems detected in LVCMem_Allocator_1
+++++++++++++++++++++++++++++++++++++++ Kernel Exit ++++++++++++++++++++++++++++
2007-06-29 13:23:18 0 12847 DBSTATE Kernel exited without core and exit status 0x2f00
2007-06-29 13:23:18 0 12849 DBSTATE Kernel exited due to signal in signal handler
2007-06-29 13:23:18 0 12890 DIAGHIST Backup of diagnostic files will be forced at next restart
2007-06-29 13:23:18 0 12808 DBSTATE Flushing knltrace pages
sh: line 1: 12065 Segmentation fault /sapdb/NW4/db/pgm/cons NW4 sh all >rtedump
2007-06-29 13:23:18 0 11987 dump_rte 'cd /sapdb/data/wrk/NW4/rtedump_dir; /sapdb/NW4/db/pgm/cons NW4 sh all > rtedump' failed
2007-06-29 13:23:18 0 12696 DBSTATE Change DbState to 'OFFLINE '(29)
current write position -
[/code]
Thank you for the supportThank you for the support Markus,
then i have to download a newer version than mine?
sapdb - MaxDB
Version:7.5-2
Build Time:Tue 21 Sep 2004 02:53:17 PM CEST
Install Time:Fri 29 Jun 2007 01:05:46 PM CEST
Package Group:Applications/Productivity
License:(c) 2004 SAP AG, Germany
Installed Size:191.3 M
Archive Size:191.1 M
Distribution:
Vendor:SAP AG, Germany
Packager:
Architecture:i386
OS:
Build Host:nw4host.wdf.sap.corp
URL:
Media No.:0
Authors:
http://dev.mysql.com/downloads/maxdb/7.6.00.html#Linux_x86_RPM
here there is 7.6 version, but the rpm packages are differnet to mine
Message was edited by:
marco scacchi -
Step2 N4S TestDrive: Error in Starting the server
I am installing N4S (NW 2004s testdrive) on SUSE Linux 64bit running in AMD 64 platform.
1) I got the license key but it was a N4S.txt (text file) instead of rpm file.
2) try to start db by su loging as n4sadm and get a message "Database Start failed..."
3) I did not have .rpm so did not install license.
The log file from database start
Fri May 22 19:12:45 CDT 2009
LOGFILE FOR STARTING DATABASE
Trying to start database ...
Fri May 22 19:12:45 CDT 2009
Checking required environment variables
SAPSYSTEMNAME is >N4S<
Start database with xuserkey >c<
Fri May 22 19:12:45 CDT 2009
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
Fri May 22 19:12:45 CDT 2009
Starting XServer
12916 XSERVER Found other running x_server with version 'X64/LINUX 7.6.00 Build 018-123-119-055'
12902 XSERVER started, 'already...'
Fri May 22 19:12:45 CDT 2009
Starting database
Starting Database Instance...
OK
Opening Database...
ERR
-24988,ERR_SQL: Sql error
-902,I/O error
3,Database state: OFFLINE
6,Internal errorcode, Errorcode 9050 "disk_not_accessible"
20014,RestartFilesystem failed with 'I/O error'
Fri May 22 19:12:53 CDT 2009
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed
After this I try startsap but I get a error message "No start profiles found"
Thanks for you helpI have reinstalled the system and installationi finished without errors.
(I mounted the *.iso file instead of writing to DVD)
I started NW04s with command (after su to n4sadm user) "startsap n4shost".
The database and SAP instance starts succesfully. I tried to run the Javagui
to install the license but run into the same problem even after installing
32 bit jre as indicated in Step 3 post separately.
I shutdown down linux (after proper "stopsap n4shost") and after some time reboot
the system and try to start NW04s but this time DB could not be started. I need
help in solving this issue. I have pasted below screen output both when the system
started successfully right after installation and when it failed when I tried to
start NW04s after linux boot.
successfull start output----
n4shost:n4sadm 51> startsap n4shost
Checking ADA db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
21:08:23 25.05.2009 LOG: Effective User Id is root
This is Saposcol Version COLL 20.89 700 - AMD/Intel x86_64 with Linux, PL:52, Mar 31 2006
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
Starting collector (create new process)
saposcol on host linux-mtl1 started
Running /usr/sap/N4S/SYS/exe/run/startdb
Trying to start database ...
Log file: /home/n4sadm/startdb.log
N4S database started
/usr/sap/N4S/SYS/exe/run/startdb completed successfully
Starting SAP Instance SCS00
Startup-Log is written to /home/n4sadm/startsap_SCS00.log
Instance Service on host linux-mtl1 started
Instance on host linux-mtl1 started
Starting SAP Instance DVEBMGS01
Startup-Log is written to /home/n4sadm/startsap_DVEBMGS01.log
Instance Service on host linux-mtl1 started
Instance on host linux-mtl1 started
FAILED to start output -
n4shost:n4sadm 57> startsap n4shost
Warning: Could not found virtuell host in ifconfig list
Checking ADA db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
22:41:40 25.05.2009 LOG: Effective User Id is root
This is Saposcol Version COLL 20.89 700 - AMD/Intel x86_64 with Linux, PL:52, Mar 31 2006
Usage: saposcol -l: Start OS Collector
saposcol -k: Stop OS Collector
saposcol -d: OS Collector Dialog Mode
saposcol -s: OS Collector Status
Starting collector (create new process)
saposcol on host linux-mtl1 started
Running /usr/sap/N4S/SYS/exe/run/startdb
Trying to start database ...
Log file: /home/n4sadm/startdb.log
Database start failed
DB startup failed
n4shost:n4sadm 58> cat /home/n4sadm/startdb.log
Mon May 25 22:41:48 CDT 2009
LOGFILE FOR STARTING DATABASE
Trying to start database ...
Mon May 25 22:41:48 CDT 2009
Checking required environment variables
SAPSYSTEMNAME is >N4S<
Start database with xuserkey >c<
Mon May 25 22:41:48 CDT 2009
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
Mon May 25 22:41:54 CDT 2009
Starting XServer
12798 NISERVER NI support started.
WNG 12453 NISSLSRV NISSL Init: SSL: Could not locate licence file
12902 XSERVER started, 'X64/LINUX 7.6.00 Build 018-123-119-055'
Mon May 25 22:41:55 CDT 2009
Starting database
Starting Database Instance...
Error! Connection failed to node n4shost for database N4S: cannot connect to server socket
Opening Database...
Error! Connection failed to node n4shost for database N4S: cannot connect to server socket
Mon May 25 22:42:04 CDT 2009
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed
Thanks,
Ashok -
About the amount of hard disk memory used during Testdrive installation
Dear all,
I have a question about installing SAP Netweaver Testdrive on Redhat Linux Enterprise 5.3. Currently I have a virtual machine (sun virtualbox) where Windows Vista is host and the guest operating system is RHLE 5.3 (32 bit). For doing several tests I would like to install the Testdrive on this linux system. Yet, the total available virtual hard disk memory is about 15 GB and I have already used more than 6GB.
Is there any way to specify the amount of hard disk memory used by Netweaver once it installs DB2 on the system? Because as it seems to me it takes more than 15 GB just for the database. But I'm not sure whether the whole space is really needed, particularly in my case where the aim of use is just for ABAP development and tests (for self-training).
Thanks in advance,
Kind Regards,
Dariyoosh
Edited by: dariyoosh on Dec 5, 2009 11:23 AMHi,
You can refer the specific installation guide for the minimum disk space requirement.
Whatever functionality you use you need minimum space as mentioned in the installation guide.
You can configure slightly more memory than given in the installation guide to be safer.
Cheeers...,
Raghu -
Publish:Subscribe issue after having duplicate the testdrive-chat project
Hello
I was training to data push possibilities with flew and for that I had created a new Flex project named "TopicProject" with Eclipse with the SAME main.mxml file than the one included in the testdrive-chat project.
I had used the same messaging-config.xml file and I had deployed the application under my Tomcat 6 server.
I don't understand why, with the same code, the data push don't work with my project while it works perfectly with the Blazeds sample.
I retreive the following error:
"erreur
The consumer was not able to subscribe to its target destination."
Thanks for your helpThank you so much for helping,
But i really wonder how you did that. did you always switch between design view and preview view, then change the key position for 2px then switch back, to align the four letters? because i imagine that can get really frustrating, if you have a logo consisting of 58 parts instead of 4!:)
Anyway thank you very much for your time and effort!!!! -
Permission Denied error when attempting NW2004s Testdrive on SUSE Linux
1) I downloaded the 7 .iso images for NW2004s testdrive and concatenated the files as described in the download page.
2) I wrote an image of the concatenated file onto a DVD.
3) Installed the 64 bit 1.4.2 JRE SLES 11 installation media. Had to "search" in YaST
4) executed the command /media/D50077575/install.sh as suggested in the instruction I get the following error
bash: /media/D50077574/install.sh: Permission denied
hence not able to even start the first step in the installation process.
Kindly help to resolve this installation issue.
Thanks,
Ashok
Edited by: Ashok* on May 22, 2009 11:39 PMThe problem of Permission seem to be solved when I invoked the command as follows
bash /media/D50077574/install.sh (i.e. I invoked the shell and passed the install.sh as a parm)
However I see the following errors thrown out on the terminal window but the installation moves on to next file.
can the suggested method of bzip2recover be a good idea?
out from installation
unpacking /media/D50077574/server/TAR/x86_64/SAPDB_I.tar.bz2
unpacking /media/D50077574/server/TAR/x86_64/SAPDB_II.tar.bz2
bzip2: Data integrity error when decompressing.
Input file = (stdin), output file = (stdout)
It is possible that the compressed file(s) have become corrupted.
You can use the -tvv option to test integrity of such files.
You can use the `bzip2recover' program to attempt to recover
data from undamaged sections of corrupted files.
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
unpacking /media/D50077574/server/TAR/x86_64/SAPDB_III.tar.bz2 -
Problems with the license N4S Linux NW 7.0 Testdrive MaxDB
Dear all,
I have a curious behaivor with my testdrive. On every OS start, the system has a different HW-Key!?
Now I've requested and installed after the installation the license key for the first HW-Key. Successfully installed the
license key via transaction slicense. Now after a second restart of the os, I've a second HW-Key. Now the first license is not working. If I want to log in with ddic on 001 client there comes a error message up: "error in license check".
If I want to install the seond liense which I got for the second HW-Key, it doens't work. After a third restart of the os I've a another HW-Key.
Strange??
Kind regards,HI
the HW Key is amongst other things generated using the MAC address of the first network device. It seems that after reboot, your first network device (first to appear with ifconfig) does have another MAC address. If so, the HWkey changes every time. This is an issue with your network start scripts ...
Thanks
Hannes -
Testdrive version of SAP Interactive Forms by Adobe ?
Hi
Can anyone please share experience with SAP Interactive Forms by Adobe in SAP WAS ABAP testdrive ?
best regards
Thomas Madsen NielsenHi Thomas,
To know more about Interactive Forms by ABAP - https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken].
Test drive? am not sure to be frank...
Thanks and Regards,
Anto. -
SAP Interactive Forms by Adobe in ABAP testdrive?
Hi
Can I try SAP Interactive Forms by Adobe in ABAP environment?
According to the download page the java testdrive 04s SP9 contains SAP Interactive Forms by Adobe , but I would like to use it in an ABAP environment and - again according to the download page - the abap testdrive 04s SP11 doesn't contain the SAP Interactive Forms by Adobe.
Best regards
ThomasHi again
I solved the problem by installing the Adobe Designer 7.1.
Now my next problem is that I have no ADS (Adobe Document service).
That makes sense to my Adobe forms newbi brain. My guess is that the ADS must run on the JAVA stack and my testdrive is a ABAP stack only.
My next shot will be to install an JAVA testdrive on top of my ABAP testdrive and see what happens.
=0) -
Problems deploying with SDM on SAP Netweaver Testdrive on Linux
Hello,
I tried to deploy the System Analyzer (see SAP-Note 770702) for NW 04 on the SAP Netweaver Testdrive on Linux (Technology Preview SAP NetWeaver 04 - SAP Web Application Server on Linux and MaxDB).
When I try to deploy it with the RemoteGui, the GUI hangs after the step 2 ('show deployment proposals for SCAs/SDA's to be deployed'). There is no error in the logfiles.
When I try to deploy it on the command line (standalone modus), I get the following error:
>>>
Caught Exception: java.lang.NullPointerException
java.lang.NullPointerException
at com.sap.sdm.serverext.sdmprovided.DeplParamVarSubstProcessorImpl.doSubstitution(DeplParamVarSubstProcessorImpl.java:238)
at com.sap.sdm.serverext.sdmprovided.DeplParamVarSubstProcessorImpl.findSubstitution(DeplParamVarSubstProcessorImpl.java:75)
at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFileSet.<init>(CPOFSJavaFileSet.java:58)
at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFileSets.<init>(CPOFSJavaFileSets.java:41)
at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFactory.createNewFileSets(CPOFSJavaFactory.java:24)
at com.sap.sdm.serverext.servertype.fs.FSJavaDeploymentActionProcessor.<init>(FSJavaDeploymentActionProcessor.java:87)
at com.sap.sdm.serverext.servertype.fs.FSJavaDeploymentActionHandler.createDeploymentActionProcessor(FSJavaDeploymentActionHandler.java:25)
at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.createDeploymentActionProcessor(PhysicalDeploymentActionExecutor.java:104)
at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.createDeploymentActionProcessor(DeploymentActionImpl.java:102)
at com.sap.sdm.app.proc.deployment.states.StateRequestTargets.processEvent(StateRequestTargets.java:69)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.processStartInstallation(DeployerImpl.java:168)
at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:80)
at com.sap.sdm.control.command.cmds.Deploy.execute(Deploy.java:182)
at com.sap.sdm.control.command.decorator.AssureStandaloneMode.execute(AssureStandaloneMode.java:53)
at com.sap.sdm.control.command.decorator.AssureOneRunningSDMOnly.execute(AssureOneRunningSDMOnly.java:61)
at com.sap.sdm.control.command.decorator.SDMInitializer.execute(SDMInitializer.java:52)
at com.sap.sdm.control.command.decorator.GlobalParamEvaluator.execute(GlobalParamEvaluator.java:60)
at com.sap.sdm.control.command.decorator.AbstractLibDirSetter.execute(AbstractLibDirSetter.java:46)
at com.sap.sdm.control.command.decorator.ExitPostProcessor.execute(ExitPostProcessor.java:48)
at com.sap.sdm.control.command.decorator.CommandNameLogger.execute(CommandNameLogger.java:49)
at com.sap.sdm.control.command.decorator.AdditionalLogFileSetter.execute(AdditionalLogFileSetter.java:65)
at com.sap.sdm.control.command.decorator.AbstractLogDirSetter.execute(AbstractLogDirSetter.java:54)
at com.sap.sdm.control.command.decorator.SyntaxChecker.execute(SyntaxChecker.java:37)
at com.sap.sdm.control.command.Command.exec(Command.java:42)
at SDM.main(SDM.java:21)
Severe (internal) error. Return code: 16
<<<
Any ideas?
Thank's a lot
PeterHi Peter,
Testdrive is a manipulated version that may miss some parts. It is definitely not intended for installing any additional SAP software nor tools on it.
Regards,
Benny -
Linux Testdrive SAP NetWeaver 7.02 on DB2 LUW now available in SAP Shop
You can find the DB6 based NW7.02 (SP09) Testdrive in www.sap.com/shop -> Knowledge Shop -> Documentation -> SAP NetWeaver -> SAP NetWeaver, material number is 50108304. Don't let yourself get fooled by the currently misleading description, 50108304 is the DB2 LUW based version. I will have that corrected. If you don't have a 64bit Linux system, you can download SLES11 VM at http://download.novell.com/Download?buildid=x1e9uCQ4074~ run the virtual machine, e. g., with VMware Player.
Have fun
ManfredHi Ulysees
Thanks for letting me know. I take care that Suse will provide the users.txt file, still a bit reluctant to post the info directly in this thread. But some colleagues did that work for me, you can check http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/40cc99a8-c0d0-2e10-4d83-c5aad873599f for an instruction. There is a detailed How-To available on this page, which hast the root user passsword on page 10.
Manfred
Edited by: Manfred Stein on Jan 16, 2012 1:25 PM
Edited by: Manfred Stein on Jan 16, 2012 1:29 PM -
Linux TestDrive SAP NetWeaver 7.02 MaxDB available in SAP Shop
We have just released a fresh version of our NetWeaver testdrive. Testdrive of NetWeaver 7.02 SPS7 is MaxDB based and can be ordered free of charge in SAP Knowledge Shop (www.sap.com/shop -> Knowledge Shop -> Documentation > SAP NetWeaver > SAP NetWeaver), material number is 50105321. A DB2 LUW version will follow within the next few weeks, we also work on a download version. We have tested with SLES10 and SLES11, RHEL6 and Ubuntu 10.10. Suse will provide a custom made SLES11 SP1 based virtual appliance with sufficient diskspace to home the testdrive. We have worked on a couple of simplifications to make the installation process even simpler than it was before.
We await your feedback
ManfredHi Manfred,
you mentioned, that SUSE would provide a custom made vmware image of SLES 11 SP1 to be used with this preview edition. Are there any news on wether and when this will be available ?
regards,
Jakob
Maybe you are looking for
-
Some PDF Document Fonts Are not Appearing Correctly.
To give an example, I am talking about this document. The image shows how it appears with my adobe reader, even though readers like evince or okular display it just fine. THe problem persists with several documents, but not all of them. So far I am n
-
Problem with universe migration
i have a problem? when i try to import universes from 6.5 to XIR2 using import wizard: some universes have migrated correctly, but with others appears an error - Details: Fail to get universe content from the source system. (ERR204) Unable to import
-
I lost the WIFI option. I reinstalled the IOS. I done all types of reset and nothing happened.
-
Material Movements activation procedure
Hi, I'm not an MM specialist and I need to activate the business content for Material Movements and I need a good guide for what needs to be done on the ERP side. I've found this help (http://help.sap.com/saphelp_nw70/helpdata/en/5b/8dc73cee4fb55be10
-
How do i transfer my apps from the old computer to the new one?
Hi Guys I just bought a new notebook and I want to know how can i transfer my apps, photos, music, etc to the new new computer? I'm affraid if i scync it it will erase everything from my Ipad. Appreciate your help Thanks a million. Majed