Testers needed for wlan-ng
Due to the recent death of my prism2 USB wifi dongle, I am no longer
able to test the wlan-ng packages before they are released. I am quite
happy to continue maintaining them, but I'm looking for others who use
this driver, and who would be willing to test future releases for me.
Anyone who is interested in helping out with this should add their
details to this wiki page:
http://wiki.archlinux.org/index.php/Driver_Testing
The module and -utils packages are updated with every upstream release
from linux-wlan-ng, and the module package is also updated with every
kernel upgrade.
Thanks
Tom K.
Did you get any takers? I use this for my MA401 pcmcia wireless card. I just don't use the card that often
Similar Messages
-
Grocery List Needed for WLAN Guest NAC
Hello - what I want to do is put a solution in place that will control any guest wireless that is out of bounds. What i mean by that for locations that have a DSL line along side the corporate network to be controlled through a NAC guest server.
Scope of the enterprise is:
* 2k8 domain.
* cisco 1200 and 1240 AP's
* 1 cisco NAC guest server
* 1 acs
* sites are all connected via MPLS
What else do I need? Of course I am trying to be mindful regarding budgetary numbers.
From reading the configuration guise for the clean access server I assume I need the Client Access manager NAC appliace as well, to have this all tie together?
Please advise on any other things, tips or tricks. :)
thank you kindly in advance.NAC Out-Of-Band (OOB) Wireless Configuration Example
http://www.cisco.com/en/US/products/ps6128/products_configuration_example09186a0080a138cc.shtml -
I PAD 2 TESTERS NEEDED; IS THIS FOR REAL?
IS ALL THIS I PAD 2 TESTERS NEEDED FOR REAL?
Umm, little more information please? Testing of what (an app, a case, a cover, a mobile solar charger - what are you being asked to test)? By whom? Who sent you the request to test something, or where did you see it?
P.S. If it is Apple asking you to help them beta test some software, they do email people (using the email address registered with their AppleID) and the email will be pretty self explanatory. -
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?
• PI provides visibility for autonomous clients within the same list view as lightweight and wired clients (client list page).
• Rogue AP detection for autonomous AP's is not supported (it's supported in CUWN).
• Alarms/events for client authentication issues (e.g. authentication failure) are displayed in PI.
• Config management for autonomous AP's is via CLI template. Config comparison and archiving functionality in PI leverages these same features that were brought in from LMS, so need to defer to others in terms of whether this is a cross-platform feature in PI or is only supported on a subset of platforms. Config comparison/archive is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client sessions, etc.) reports, and there are extensive reports for CUWN -
Pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
pavilion dv6 - the search for WLAN doesnt exist after installing windows 7 ultimate
after installing windows 7 my computer only displays the LAN on my quicklaunch bar and I can even search for open WLAN networks =(Hi:
You probably need to install the wireless card driver. -
Search for WLAN disappeared from my N81
Hi,
I own a Nokia N81 and today, all of the sudden, the "search for WLAN" option that used to be available on the menu that pops up whenever there's the need to connect to the Internet just disappeared (I can only see 2G and 3G access points).
If I'm near a WLAN network that I had previously setup on the access points setup menu, it appears on the popup menu.
I didn't do anything (didn't change any setting, didn't install/uninstall anything). The only thing I remember was my phone getting out of battery last night, but that already happened before without this issue.
Does anyone know what may have caused this? And is there any possible solution?Does anyone have a clue about this problem?
-
help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2 02 Computer Science
3 03 Physics
4 04 Chemistry
5 05 Mathematics
7 07 Commerce
8 08 Computer Applications
9 09 Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383 S1 9 4 2 3
384 S2 4 2 5 3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383 S1
384 S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1 383 9
2 383 4
3 383 2
4 383 3
5 384 4
6 384 2
7 384 5
8 384 3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2 SUBJECT3 SUBJECT4
383 S1 Biology Chemistry Computer Science Physics
384 S2 Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID subjects
383 Biology,Chemistry,Computer Science,Physics
384 Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --PradeeshWell I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say. -
XMLAGG structure, performance help needed for odd nesting in schema
Hello,
I have to produce XML to look like:
<?xml version='1.0'?>
<enterprise>
<membership>
<sourcedid>
<id>PHYS_101_001_FA2007</id>
</sourcedid>
<!-- NOTE: absence of "members" level tag for XMLAGG! -->
<member>
<sourcedid>
<id>D2LU0001</id>
</sourcedid>
<role roletype="Sample Role">
<status>1</status>
</role>
</member>
<member>
<sourcedid>
<id>D2LU0002</id>
</sourcedid>
<role roletype="Sample Role">
<status>1</status>
</role>
</member>
</membership>
</enterprise>This would be straightforward if the schema allowed for a "<members>" tag under which to nest the <member> tags. But, it does not allow for that tag or any other than those listed above.
I have a query which does produce that output (except for the roletype attribute), but its performance is horrible; it takes about 40 minutes to return data:
SELECT
XMLROOT(
XMLELEMENT("enterprise",
XMLAGG(
XMLELEMENT("membership",
XMLFOREST( XMLELEMENT("id",cx.mapped_course_id) as "sourcedid"
(SELECT XMLAGG(
XMLELEMENT("member",
XMLFOREST(XMLELEMENT("id",spriden_id) AS "sourcedid",
XMLELEMENT("status",'1') AS "role"
FROM enrollments_fall_sfrstca efs
, spriden sp
, gzv_tuid t
WHERE sp.spriden_change_ind IS NULL
AND sp.spriden_pidm = t.pidm
AND t.tuid = efs.user_name
AND efs.mapped_course_id = cx.mapped_course_id
AND efs.term = cx.semester
, VERSION '1.0', STANDALONE NO VALUE)
FROM courses_xt cx
WHERE cx.semester = :term_code
;Similar queries are producing courses and users XML fine with no performance issues, but these are driven off either the courses view or the enrollments view, but not both.
Is there some other way I can produce the nesting I need for the vendor's schema?
The source views are basically as follows (showing relevant columns only):
courses_xt:
MAPPED_COURSE_ID SEMEST
AVFT209-13307-201210 201210
AVFT210-13308-201210 201210enrollments_fall_sfrstca:
MAPPED_COURSE_ID USER_NAME
AVFT209-13307-201210 FULLERC8
AVFT209-13307-201210 SHUPEK
AVFT209-13307-201210 NOMAN
AVFT210-13308-201210 SHUPEK
AVFT210-13308-201210 PELLONMWhen I have the query without the XML (with the subquery as a column of the outer query), this returns the correct data quickly (a couple of minutes).
I have tried various permutations of XMLFOREST, XMLELEMENT, XMLAGG but either I get syntax errors, or the data is wrong (e.g. repeated '<membership>' for each '<member>', or I have to create an invalid tag '<members>' to be filtered later).
Please advise!
Thanks,
Anita LeesHi Anita,
Have you tried with a GROUP BY and no subquery?
Here's an example using SCOTT schema.
I've used the same tag names and structure so that you can see the analogy :
SELECT XMLElement("enterprise",
XMLAgg(
XMLElement("membership",
XMLElement("sourceid", xmlelement("id", d.deptno))
, XMLAgg(
XMLElement("member",
XMLElement("sourceid",
XMLElement("id", e.empno)
, XMLElement("role",
XMLAttributes(e.job as "roletype")
, XMLElement("status", '1')
FROM scott.dept d
LEFT OUTER JOIN scott.emp e ON e.deptno = d.deptno
WHERE d.deptno IN (10,20)
GROUP BY d.deptno
;which gives :
<enterprise>
<membership>
<sourceid>
<id>10</id>
</sourceid>
<member>
<sourceid>
<id>7782</id>
</sourceid>
<role roletype="MANAGER">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7934</id>
</sourceid>
<role roletype="CLERK">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7839</id>
</sourceid>
<role roletype="PRESIDENT">
<status>1</status>
</role>
</member>
</membership>
<membership>
<sourceid>
<id>20</id>
</sourceid>
<member>
<sourceid>
<id>7369</id>
</sourceid>
<role roletype="CLERK">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7902</id>
</sourceid>
<role roletype="ANALYST">
<status>1</status>
</role>
</member>
<member>
<sourceid>
<id>7566</id>
</sourceid>
<role roletype="MANAGER">
<status>1</status>
</role>
</member>
</membership>
</enterprise> -
MSI ti 4200 128 MB and Problems with "Need for Speed: HighStakes"
Does any one know of a fix for "Need for Speed: HighStakes" with the new 45.32 drivers. When trying to start this game it won't even load, the screen goes dark for a second and then falls back to the desktop. Did the same thing with 43.45, but if I install the drivers that came with the Video card ( I think they were 31.XX) then the game works fine. Haven't come across any other games that won't run except this one, some examples that work fine are UT 2003, C&C: Generals, Warcraft 3, Hot Pursuit 2.
System:
XP pro OS (sevice pack 1) DirectX 9
Athlon 1800
512 MB RAM
MSI nforce 2 Main board
MSI GeForce 4 4200 ti 128 MB 8X AGP
Thanks for any info.well I "bugged" the game makers (EA) and the response is that the game doesn't suport Windows XP. Strange that the older nVidia 31.xx drivers work fine with the game. Also played it on my last machine which had XP and a ATI radeon video card. OH well who ever said Direct X was supposed to be backward compatible.
Too bad the older drivers don't work so well with the newer games. -
Hi! I can't upgrade my iTunes 10.3.1.55 on my Windows XP 2002 SP3 to the latest version of iTunes. Got the message: "A problem has occured with the Windows Installer-package. A program needed for this installation could not be run." What to do?
Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time? -
hi have just purchased iphone 4s . my itunes on my mac is currently 10.4 . 10.5 is needed for the new iphone but when i download it and click on install the itunes about still says 10.4 . have tried to update through itunes but it says there is no software available for me . please help . mr frustrated
If your computer is running an OS X prior to Snow Leopard 10.6,
the answer (if it is an Intel-based Mac; not old PowerPC model)
would be to buy the retail Snow Leopard 10.6 DVD from Apple
for about $20, and install it. Then update that to 10.6.8 by using
the installed Snow Leopard online to get Combo Update v1.1 for
Snow Leopard 10.6.8. After that is installed & updated, run the
system's Software Update again, to see what else is available to
that system.
Later systems can then be looked into at Mac App Store, once
the computer is running Snow Leopard 10.6.8.
And if your computer is a Power PC (G4/G5, etc) and has no
Core2Duo kind of CPU -- See "About this Mac" in apple menu
to disclose the general info about your Mac. Also you can see
even more by clicking on "More Info" when looking in there...
If it isn't an Intel-based Mac, it can't run a system past 10.5.8.
Hopefully this helps.
Good luck & happy computing! -
Can i use my creative cloud membership on laptop and desktop? Or is one membership needed for each device?
Yes you can!
-
As I said above, I want to view my iPod screen on our new 40" Sony Internet full HD TV.
I know that you can do this via HDMI but a Sony guy said that you should be able to do this wirelessly by going through the router. Is this true and can I do this without the need for the Apple TV?
We are soon going to get the airport extreme, so will it work with that?1. Is it a smart TV?
2. If so.... Is the TV connected to the Internet?
3. If it is.... Check if your iPod and your TV share the same IP address (Wi-Fi network)
4. If they do.... Then you should go to wherever your "Other Media" tab is.
5. After that.... Search for you iPod. Because it is connected to the same network, it should recognize the device they same way AirPrint does.
6. If you happen to see this fail, then try this method:
1. Do you have a Bluetooth-enabled computer/laptop?
2. If so.... Enable the bluetooth on the computer/laptop as well as your iPod.
3. After that.... Your iPod should be actively searching and it should find the computer/laptop.
4. If it did.... Transfer the file onto Windows/Mac (preferably Mac) and find the program to open the file.
5. After doing so.... Connect your computer/laptop to the TV via HDMI Output Cable.
6. Now it should work! -
How many Licenses of Acrobat Professional do I need for Adobe LC PDF Generator
Hi,
At our customer site we have purchased 6 licenses of Adobe LiveCycle PDF Generator and have recieved a license file with the keys for Adobe LiveCycle PDF Generator and Adobe Acrobat Professional. We bought the license from a reseller of the product. We understand that the Adobe LiveCycle PDF Generator is a server based software and needs 1 license per CPU. Each of our server (Dev, Val & Prod) have 2 CPU's so we have sufficient licenses (6). We are under the impression that this would suffice. How ever we are not sure on how many licenses we need for Acrobat Professional.
Here is a brief description of the way we would use Adobe LiveCycle PDF Generator. We are deploying a PLM system and one of the requirement is to render Word documents to PDF so we are using PDF Generator for this capability. On our Adobe servers we will install Microsoft Word, Acrobat Professional V9 Extended and the Adobe Livecycle PDF Generator. We will have around 150 users for the PLM system being deployed. The PLM system is a Web based system which means the PLM application server will be running on a Solaris server in our case. As part of the workflows in the PLM system, at the end of the workflow process, the PLM server would trigger a request to the Adobe server to convert the word document to PDF. The Adobe server processess the request and returns the PDF file that gets generated.
Based on the above usage of the system how many licenses of Acrobat Professional do we need? We will be installing Acrobat only on the server where we install the Livecycle PDF Generator. We had a call with our purchasing person today and she cautioned us that for Adobe Acrobat Professional we might need 1 license per user of the PLM system. She has asked us to check this with the Vendor of the product. Somehow I don't think it makes sense to purchase so many Acrobat Professional licenses even though we install only once.
So can someone tell me How does the licensing for Adobe Livecycle PDF Generator work? How many Acrobat Professional licenses we actually need? Is it based on the number of users in the system that is triggering the request? Appreciate your response on this.
Regards,
RaghaYou really should talk to your Adobe Sales Rep about this. There are all kinds of special deals, licenses and such for customers using LiveCycle. (For instance the license for PDFG may include Acrobat licenses for certain uses).
-
Temporary wim-files for multicast transmissions still needed for WDS installation in Server 2012 R2?
Acording to
https://technet.microsoft.com/en-us/library/dn281955.aspx one of the new features for WDS in Server 2012 R2 for multicast is:
Improved multicast deployment by eliminating the need for making a local copy of the install.wim file. You can apply the install.wim file while it is being downloaded without significant impact to the application process.
However, this doesn't seem to be activated by default and I still get the following error when installing one or more machines using multicast:
"Windows Setup cannot locate a valid hard drive to store temporary installation files." However, once I remove Multicast from this install image, it installs without any problems at all.
I have also noticed that while multicasting, the installation will use the "Copying Windows files" phase, while downloading and copying the install.wim (or whatever name it is) locally on the hard drive first, so this will require lots of space.
So the question is, how do you enable this new feature that should be a part of WDS in Server 2012 R2???Full version:
Following steps could help enable the feature:
1. Mount the boot image using dism.
e.g.
>dism /mount-wim /wimfile:c:\remoteinstall\boot\x64\images\boot.wim /index:2 /mountdir:c:\mount
2. Create a metadata file if no existing one. The metadata file should be in mountdir from the first step under mountdir\sources. And the file name should be: WdsClientMetadata.txt
3. Add entry to the metadata file: WDS.Client.Multicast.WIM.Streaming.Enabled=true
4. Save changes and unmount the boot image
e.g.
>dism /unmounts-wim /mountdir:c:\mount /commit
Sorry for the late reply, but I had to test this thoroughly since I didn't get it working right away. I tried both the regedit you first mentioned, and later also creating a textfile in the "/index:2 boot.wim", both without any success. I noticed
that creating the sources\WdsClientMetadata.txt with the data "WDS.Client.Multicast.WIM.Streaming.Enabled=true" gives me an error upon booting into WDS as follows (EUFI/IPv6-boot):
Same happens if I boot using IPv4 (an non-UEFI boot), except that there would be a plain IPv4-address instead in the error msg. Just for troubleshooting I tried writing WDS.Client.Multicast.WIM.Streaming.Enabled=false in the file instead, and WDS would throw
me the exact same error message. Once I delete the file sources\WdsClientMetadata.txt from the WDS/Boot image, the client boots ok, both for IPv4/IPv6. Disabling the firewall on the WDS didn't help, so something in the configuration is still missing? I'm getting
to a dead end here, and I suppose you're all out of advice on this one?
Thank you Shaon Shan for your great effort so far.
Maybe you are looking for
-
HT204266 How come my credit card says invalid security code when I put my code in at the App Store?
How come my credit card says invalid security code when I put my code in at the App Store? I have a bunch of free apps when I had my ipad 1 now I have 2 and my credit card will not be read as authentic Watson ever I tried my girls card nothing do I n
-
Explanation about invoice reversal for standard price.
Hi, Please see the excerpt from SAP help below. I extracted this example in sap help found at http://help.sap.com/saphelp_47x200/helpdata/en/fc/85c5371e5db25fe10000009b38f8cf/frameset.htm With regards to the example found below i dont understand why
-
Okay so I had my itunes on my moms computer and now her computer is broken and I need to buy stuff on itunes (And I want to see my wish list again). How can I transfer all my old stuff over to this new computer with out changing anything or having an
-
FPRUNX001 error when fp_docparams-fillable = 'X', else PDF is created.
Hi, When I use following code, I get FPRUNX001 system error that : Request start time: Sun Dec 23 23:11:47 CST 2007 (200101)... fp_docparams-langu = 'E'. fp_docparams-country = 'US'. fp_docparams-fillable = 'X'. CALL FUNCTION fm_name EXPORTING
-
ORA-00942 Table does not exists
Dear collegues, I have imported my csv file with the correct location. I have defined a user user for tagest Wh. T have connected the external tale to my csv file.The location ist setup correctly. But if i try to see my data in the external table i w