Testexec.ini access denied...
Hi,
While running on a test station using the teststand deployment, TestStand randomly crashes by the end of the sequence execution and a pop-up appears to specify: testexec.ini access denied... More precisely, it crashes between the end of my test sequence and before the "PASSED"/"FAILED" pop-up appears... Afterward, the testexec.exe just crashes and kills all remaining execution as the application closes...
When I go to my \cfg files, I can found a file INI$$0.TMP and if I compare it with the Testexec.ini file, they are identical and with the same date/time....
I should also precise that, this morning, the issue occured after the 8th consecutive execution... Therefore, this is not a write/access permission issue... Anyway, I configured windows to provide the "FULL CONTROL" permission on my test engine directory / deployment directory (including the cfg dir) which is located to "C:\ATE_Teststand_engine\".
I really need to get this fixed as soon as possible... Is there a way to prevent teststand updating this file after each execution?
PC Configuration:
Win7 SP1
Teststand 2013 base deployment
Labview 2013 f2 runtime engine
Thank you for help!
C.
Hi jigg,
You right, my config files are located at "C:\ATE_Teststand_engine\Cfg\", but my station options are configured accordingly... Furthermore, as mentioned in the issue description, the problem occured on the 8th consecutive execution, so the files should be loaded properly...
«« Look in Configure>>Station Options>>Preferences tab. Is that set to your cfg folder? »» yes
Maybe some additionnal info:
I use the Sequential process model
I run 3 instances of the test, i.e. I pressed "Test UUTs" 3 times. However, when the problem occured, only 1 thread was terminating, the others were running my sequence...
I use a custom opertor interface, but based on the teststand simple operator interface.
Attachments:
StationOptions.png 40 KB
Similar Messages
-
TestStand: Access Denied to testexec.ini file
When changing search directories, or any station property, I get an access denied error, and the changes to the search directories don't get saved.
Hello Shay,
If you are using Windows 2000/NT and your drive in which TestStand is located is partinoned as NTFS, you can set security permissions on folder or on a file basis. You should check your security settings for the folder \Cfg. This folder contains all the INI files that store the station options, and search directory settings. You may have the folder set to deny write access, when it should be set to full control. You can access the security options by right-clicking on the file/folder and selecting Properties from the context menu. Hope this helps. -
Adobe Reader 11.0.06 "There was an error opening this document. Access Denied"
Windows 7 64-bit
If I go into My Windows 7 Documents Library folder (which is redirected by Group Policy to a network share), I get "There was an error opening this document. Access Denied". If I then map a drive to the share, I can open the PDF without the error message.
I've read a workaround for some time now for older versions has been to uncheck Enable Protected Mode at startup under Security (Enhanced) in Preferences. I find this does work but this is probably not the best way to handle this situation.
I've also read one person removed the desktop.ini on the desktop to resolve.
Is there any official response from Adobe on this issue that I can be pointed too? Are others still having this issue?
We plan to update several thousand clients and I'd like resolve this issue before we do.We tried 11.0.05, 11.0.06 and 11.0.07 with the same result on different computers with different local Admin accounts.
When we re-install 10.1.0 the issue is gone and Protected Mode is enabled.
We then returned to 11.0.06 or 11.0.07
I'm logged in with a local Admin account.
I turned on Protected Mode Logging and captured what happens when I attempt to double click a pdf file in my Documents Library with 11.0.06 installed. Access Denied.
I then doubled clicked the file from a drive mapped to the same share and the file opened.
[06:11/16:02:40] Adobe Reader Protected Mode Logging Initiated
[06:11/16:02:41] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \REGISTRY\MACHINE\Software\Adobe
[06:11/16:02:41] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:41] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \REGISTRY\MACHINE\SOFTWARE\Wow6432Node\Adobe
[06:11/16:02:41] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:41] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \??\Volume{a758d00a-e81c-11e2-b856-806e6f6e6963}\$Extend\$Reparse:$R:$INDEX_ALLOCATION
[06:11/16:02:41] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:41] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \??\UNC\nawrcs-bbc1fs\mousers\u212940\Documents\Citrix Adding a Printer.pdf
[06:11/16:02:41] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:41] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:41] real path: \??\UNC\nawrcs-bbc1fs\mousers\u212940\Documents\Citrix Adding a Printer.pdf
[06:11/16:02:41] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:46] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:46] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:46] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \??\C:\Users\c702939\AppData\Local\Microsoft\Windows\Caches\cversions.1.db
[06:11/16:02:47] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:47] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \??\C:\Users\c702939\AppData\Local\Microsoft\Windows\Caches\cversions.1.db
[06:11/16:02:47] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:47] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:47] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:47] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:47] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateKey: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \REGISTRY\USER\S-1-5-21-1691402968-2266345157-3523873211-67461\Software\Adobe\Adobe Acrobat
[06:11/16:02:47] Consider modifying policy using this policy rule: REG_ALLOW_ANY
[06:11/16:02:47] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:47] real path: \??\C:\Users\c702939\Desktop\desktop.ini
[06:11/16:02:47] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY
[06:11/16:02:48] NtCreateFile: STATUS_ACCESS_DENIED
[06:11/16:02:48] real path: \??\C:\Users\c702939\Desktop\desktop.ini
[06:11/16:02:48] Consider modifying policy using these policy rules: FILES_ALLOW_ANY or FILES_ALLOW_DIR_ANY -
Access Denied error while editing interactive forms in NWDS
Hi,
I am getting following error while editing the Adobe Interactive form in NWDS, I didnt understand why i am getting this error please help me in this issue
the error i am getting is as follows
java.io.FileNotFoundException: C:\Documents and Settings\my user\Application Data\Adobe\Designer\FormDesigner.ini (Access is denied)
at java.io.RandomAccessFile.open(Native Method)
at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
at com.sap.ide.webdynpro.adobetemplatedesigner.internalisation.AdobelanguageSettingService.setAdobeLanguage(AdobelanguageSettingService.java:43)
at com.sap.ide.webdynpro.adobetemplatedesigner.AdobeDesignerEditorPart.createPartControl(AdobeDesignerEditorPart.java:123)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:661)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:428)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:594)
at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:266)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2820)
at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2729)
at org.eclipse.ui.internal.WorkbenchPage.access$11(WorkbenchPage.java:2721)
at org.eclipse.ui.internal.WorkbenchPage$10.run(WorkbenchPage.java:2673)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2668)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2652)
at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2635)
at com.sap.ide.webdynpro.adobetemplatedesigner.listener.ViewDesignerActionListener.launchAdobeDesigner(ViewDesignerActionListener.java:73)
at com.sap.ide.webdynpro.adobetemplatedesigner.contentprovider.LaunchDesignerAction.run(LaunchDesignerAction.java:30)
at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)
at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:583)
at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:500)
at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:411)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2384)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2348)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2200)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:495)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:490)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)
at org.eclipse.equinox.launcher.Main.run(Main.java:1236)
thanks
AnuHi Anu,
Please check if you have permissions in C:\Documents and Settings\my user\Application Data\Adobe\Designer\FormDesigner.ini
Change "my user" to the actual user.
Best regards, Aldo. -
I had made some changes to a 1st level subsequence (one that is called by the main sequence) and ran some test and all was fine. Then I opened another 1st level subsequence to make similar changes. It opened but I got a message stating that TS couldn't write to TestExec.ini. That was because it was not checked out from ClearCase. Why did TS want to update this file at this time?
Inquiring minds want to know.......
Thanks,
jvhHi Larui,
When does this error occur? I've found a KB on error code -17205 that might help you out. It's listed below.
Problem
The NI DataFinder is indexing files on my machine (installs with DIAdem or LabVIEW DataFinder Toolkit or DataFinder Server Edition), and I sometimes receive errors -5001 and -17205 when generating XML or ATML reports from TestStand example sequences. I am able to generate HTML and ASCII reports without any errors – what is causing these errors?
Solution
An explanation of the cause of these errors is provided below. This issue (as described below) is fixed in the NI DataFinder 2011 when TestStand 2010 SP1 or newer is installed.
The NI DataFinder periodically indexes files in certain default directories, one of which is the National Instruments Public directory. When the DataFinder attempts to index a file, it grabs exclusive read access to the file such that no other process can read or write to the file.
When generating an XML or ATML report, TestStand obtains and releases write access to the file on multiple occasions when creating the file, writing to the file, adding/removing root tags, etc., and TestStand does not expect other applications to lock the file. By default, TestStand will attempt to generate a report file in the same directory as the sequence file being run.
You may encounter the above mentioned errors if all of the following apply:
You install a DataPlugin for TestStand XML or ATML report files
You generate an XML or ATML report for a TestStand sequence, such as a TestStand example sequence file
DataFinder is configured to index the directory where TestStand generates the report, such as the <TestStand Examples> directory.
To work around this issue, you can manually exclude a directory where TestStand generates reports from NI DataFinder’s list of Search Areas (directories to index).
The Version Selector application installed by TestStand 2010 SP1 automatically configures DataFinder 2011 to exclude files in the <TestStand Public> directory for all version of TestStand installed on a machine. Thus you will not encounter the above mentioned error when running TestStand example sequences if TestStand 2010 SP1 or newer is installed and DataFinder 2011 is indexing files on your machine.
I hope this helps.
Josh L.
Applications Engineer
National Instruments -
Report generation failed----error code:-17205; Access Denied.
Hi, All
i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
detail:
An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
error code:-17205; Access Denied.
locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
How to fix it?
Thanks a lot.
BRHm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY -
hi,
as part of my requirement , i have to perform read and write operations of few files [ using the file upload control in my custom visual web part] and on submit button click.
but while writing these files - with the help of fileupload control - and when i use myfileupload.saveas(mylocation);
- i am saving these files into my D:\ drive of my server , where i am executing my code -, am getting access denied error.
it throws system.unauthorizedexception.
i have given full control on that folder where i was trying to store my attached files. and also after following asp.net forums,
i have added iusr group added and performed all those steps such that, the file is saved in my D:\ drive.
but unfortunately that didnt happen.
also
a) i am trying the code with runwithelevatedprivileges(delegate() ) code
b) shared the drive within the d :drive where i want o save the files.
c) given the full privieleges for the app pool identity- in my case , its
network service.
the other strange thing is that, the same code works perfectly in other machine, where the same sp, vs 2012 etc were installed .
would like to know, any other changes/ steps i need to make it on this server, where i am getting the error.
help is appreciated!vishnuS1984 wrote:
Hi Friends,
I have gone through scores of examples and i am failing to understand the right thing to be done to copy a file from one directory to another. Here is my class...So let's see... C:\GetMe1 is a directory on your machine, right? And this is what you are doing with that directory:
public static void copyFiles(File src, File dest) throws IOException
// dest is a 'File' object but represents the C:\GetMe1 directory, right?
fout = new FileOutputStream (dest);If it's a directory, where in your code are you appending the source file name to the path, before trying to open an output stream on it? You're not.
BTW, this is awful:
catch (IOException e)
IOException wrapper = new IOException("copyFiles: Unable to copy file: " +
src.getAbsolutePath() + "to" + dest.getAbsolutePath()+".");
wrapper.initCause(e);
wrapper.setStackTrace(e.getStackTrace());
throw wrapper;
}1) You're hiding the original IOException and replacing it with your own? For what good purpose?
2) Even if you had a good reason to do that, this would be simpler and better:
throw new IOException("your custom message goes here", e);
rather than explicitly invokign initCause and setStackTrace. Yuck! -
The system failed to merge, error code : General Access denied
The system failed to merge, error code : General Access denied. Could anyone help me on this
Hi,
It could be several things, I think it could be a good start with the following page:
https://blogs.technet.com/b/chrad/archive/2009/10/02/differencing-disks-merging-80070005-error-just-one-persons-lesson-learned.aspx
If that doesn't help you could check out the following technet page to see if it is a permission problem. (it is not exactly the same problem but one of our customers once had the same problem and we solved it with the follwing KB:http://support.microsoft.com/kb/2249906/en-us
Hope this helps you out. -
Folder Redirection 502 Access Denied but redirecting to wrong place
Hi,
I have come across a very unusual problem. Folder redirection was implemented a few months ago where a number of folders were redirected with the following settings:
Redirect everyones folder to the same location
Create a folder for each user under the root path
\\server\homefolders
It has worked flawlessly but in recent weeks when we create new users, some of them experience this problem. Folder redirection fails consistently for that user with 502 Access denied. That isn't the unusual bit. This is the unusual bit
- The message is:
Failed to apply policy and redirect folder "Documents" to "\\fileserver\homefolders\joe.bloggs\Documents".
Redirection options=0x1001.
The following error occurred: "Failed to build the list of regular subdirectories under "\\fileserver\homefolders\Jane.Doe\Documents".".
Error details: "Access is denied.
Yes for some reason it knows where it should be redirecting to, but then attempts to redirect to someone elses home folder location. I've substituted the server name and user names for security but the name equivalent to Jane.Doe is consistent in every
error.
This only occurs on our RDS 2012 R2 farm, which has 3 session hosts and doesn't happen on any other system. We use roaming profiles. I have logged the user off and deleted the local and network profiles but get the same result. I've
rebuilt the GPO that handles folder redirection, but again, same result. I've checked and double checked Folder Redirection settings and nothing points to a this specific Jane.Doe user.
Anyone come across this before?Hi,
I have come across a very unusual problem. Folder redirection was implemented a few months ago where a number of folders were redirected with the following settings:
Redirect everyones folder to the same location
Create a folder for each user under the root path
\\server\homefolders
It has worked flawlessly but in recent weeks when we create new users, some of them experience this problem. Folder redirection fails consistently for that user with 502 Access denied. That isn't the unusual bit. This is the unusual bit
- The message is:
Failed to apply policy and redirect folder "Documents" to "\\fileserver\homefolders\joe.bloggs\Documents".
Redirection options=0x1001.
The following error occurred: "Failed to build the list of regular subdirectories under "\\fileserver\homefolders\Jane.Doe\Documents".".
Error details: "Access is denied.
Yes for some reason it knows where it should be redirecting to, but then attempts to redirect to someone elses home folder location. I've substituted the server name and user names for security but the name equivalent to Jane.Doe is consistent in every
error.
This only occurs on our RDS 2012 R2 farm, which has 3 session hosts and doesn't happen on any other system. We use roaming profiles. I have logged the user off and deleted the local and network profiles but get the same result. I've
rebuilt the GPO that handles folder redirection, but again, same result. I've checked and double checked Folder Redirection settings and nothing points to a this specific Jane.Doe user.
Anyone come across this before? -
I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html
Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium -
SharePoint 2010 - Claims Based Authentication - Access Denied for AD Group members
We're in the process of migrating our SharePoint 2003 system to 2010 and have used Metavis to migrate the data. We had to do the data migration in a lab environment and then move/attach the content database to our production server. The database attached successfully
and I, as a site collection administrator, can see all sites and the data therein. We are using claims-based auth with ADFS 2.0 as the provider.
My users, however, get access denied trying to go anywhere on the site. I have added the Active Directory groups to the appropriate SharePoint groups and have confirmed the groups are appearing with the c:0-.t|adfs|group_name syntax. If I add them as individual
users (i:05.t|adfs|[email protected]) they can authenticate fine, but not by AD group membership.
I enabled ADFS tracing and I see that the claim being provided includes the SIDs for all the groups the user belongs to. Using ULS Viewer I can see that SharePoint sees the correct number of claims (it doesn't show what those claims are, just the number) but
it doesn't seem to be connecting the SIDs passed to the group name used in the permissions list. I have also updated the portalsuperreader and portalsuperuser accounts after the database was moved, just in case there was something weird there.
The ADFS and SharePoint servers are all in the same AD domain, so they should be able to resolve SIDs ok. I suspect the issue is somehow related to the migration of the content database from a separate
environment (different domain), but I can't figure out for the life of me how to get the group authentication to work.
Thoughts?Brilliant idea. Unfortunately that didn't work - I can get to the new site as the site collection owner, but members of groups to which I assigned permissions still get Access Denied. :-(
-
Good evening, technet community
I hope you are doing well.
When configuring my SharePoint workflow, I encounter the problem below:
Problem Description:
Let's say my domain is: test.com, my group user is: test\group , my user is: test\user1
Except an admin account with full control at both "Web Application" and "Site Collection", all others account all have problem when creating a list item. After creating a list item, the workflow status is "cancelled" immediately
with the following message:
RequestorId: 262a35e4-99f4-40f0-929b-5d04b415f147. Details: System.ApplicationException: HTTP 401 {"Transfer-Encoding":["chunked"],"X-SharePointHealthScore":["0"],"SPClientServiceRequestDuration":["10"],"SPRequestGuid":["262a35e4-99f4-40f0-929b-5d04b415f147"],"request-id":["262a35e4-99f4-40f0-929b-5d04b415f147"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Cache-Control":["max-age=0, private"],"Date":["Thu, 06 Nov 2014 12:14:28 GMT"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["NTLM"],"X-AspNet-Version":["4.0.30319"],"X-Powered-By":["ASP.NET"]}
{"error":{"code":"-2147024891, System.UnauthorizedAccessException","message":{"lang":"en-US","value":"Access denied. You do not have permission to perform
this action or access this resource."}}} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor,
BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
- The workflow is still fail even I assign "full control" to my users group "test\group" – at Site Collection level.
Surprisingly, I have successfully found a solution for this error message. However, I still have some points that I do not clearly understand. Let's start with my solution first.
Solution:
*** i. Assign permission policy at Web Application level – Central Admin site ***
1. Central Administration ==> Application management
==> Manage Web application
2. Go to "permission policy", then create a new permission level. This permission level contains all "edit item" permission.
3. Select "user policy", then I assign it directly to my user account: test\user1.
*** ii. Assign "edit item" permission at Site Collection level ***
1. Site Setting ==> Site permission
2. Assign "Edit" permission to my test\group.
(Actually I removed all permissions of my user group at Site Collection level. It seem my group has inherited permission from Web Application level, is that correct? )
*** iii. Create a new list item and workflow runs ……. ***
==> My question is:
1. Why I cannot assign permission to my users group - "test\group" -
at "Web Application" level? Instead I have to assign permission policy for each users, one by one?
2. Could you please let me know how to collect full detail error message of workflow status?
Thank you very much! Have a nice weekend.Thank you for your very detail response.
Point 1: Yes my 2 service: user profile & profile sync service are running. I performed "full synchronization" as well. Actually i've tried 3 another action plans before coming up with the solution i posted:
*** Actions completed ***
1. Activate the feature: workflow can use app permissions.
Site actions > Site Settings > Site features >activate the feature below:
Workflows can use app permissions
2.
Refresh trusted security token services metadata feed
Get-SPTimerJob
"RefreshMetadataFeed"
| Start-SPTimerJob
- then restart the machine.
3. Start full user profile synchronization.
Point 2:
- Yes my user had Edit permission at workflow task list + list affected by workflow.
I have just remove all permissions of my user at "Site Collection" level. However, when i show my user permissions at my workflow task list and my users still have "Edit" Permission ( assigned at Web Application level. These permissions
still exist even after my workflow task list stop inheriting permission).
==> the problems probably belongs to "permission" at "Site Collection level". It seems "permission level at my Site Collection does not work". All users accounts are also suffer from the same issues except farm admin account
( which has full control at Web Application level).
I would appreciate if your guys can guide me how to make "permission" at my "Site Collection level" work again?
Thank you very much. -
Multiple instances of firefox running cannot kill in task manager "Access denied"
There's no issue with starting a new instance after closing one, the "firefox is already running" error is not occurring (ok maybe once or twice a month, but it's not related to this problem, as my problem happens all the time.)
Apparently when closing a ff window it never fully stops. My computer slows down because of it and these multiple instances of firefox show up in Task Manager. When I try to kill the extra processes it just goes "BANG" and the "access denied" error dialog box appears. They are all running under my user account, and in CPU some are just 10 or 25 and some are in the hundreds and some are over a million. what the heck is going on?
I'm running Windows 7 64 bit and ff 23.0 but this has been happening since about ff 15 (?)When closing Firefox completely, it is important to close it using the <i>Exit</i> button, located inside of the Firefox/File menu.
Another cause to this problem could be a Firefox preloader. Do you have any programs that will load Firefox automatically? They are supposed to improve start time.
You can also '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* Open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
I hope that one of my solutions helps to fix your problem. Please report back with updates soon.
<b>NOTE: </b>You are using an outdated version of Firefox. This can cause security and functionality issue. Please update to the most recent version as soon as possible. -
There was an error opening this document. Access denied.
Greetings,
When I did my taxes last year (March 2012), I downloaded some pdf files from the IRS. Form 1040 was a writable file and I filled it out as needed. This file was saved on a Vista machine running XP. A few months ago, I upgraded that pc to be Windows 7 SP1.
Today I'm getting ready to do my taxes for this year. When I double click on last year's Form1040.pdf, I get the following error message:
There was an error opening this document. Access denied.
Interestingly, I can open other pdf files, like the Form 1040 Instructions. I do not think that I password protected my Form1040.pdf. The reason that I think it isn't password protected is because I'm not being prompted to enter a password.
I copied the file to an old spare XP machine (XP Home, version 2002, SP3) that I have and it opened fine. It did not prompt for a password. I printed copies of last year's forms from that XP machine, so this isn't an emergency for me, but it is mildly annoying that I can't figure out what's wrong.
I have Adobe Reader XI version 11.0.2 installed on both machines (the Windows 7 machine and the old XP machine).
To summarize, it was created on Vista, I can't open it with Windows 7, but I can open it with XP.
Normally I would consider uploading the file in question, but in this case, I hope you'll agree that might be a bad idea!
Advice on how to get this to work on Windows 7 would be appreciated.Pat Willener: Thanks! That solved the problem.
For anyone else having this problem, here's a detailed list of how I used Pat's advice to solve my problem:
1. Right click on the problematic file
2. Select Properties
3. Select the Security tab
4. Press continue
5. In the "Permissions for MyFile.pdf" dialog, press "Add".
6. In the "Select Users or Groups" dialog, press "Advanced".
7. The next dialog that pops up is also named "Select Users or Groups". Press "Find Now".
8. Scroll down the list of search results until you find your username.
9. Double click on your username.
10. Press ok in the "Select Users or Groups" dialog.
11. Press ok in the "Permissions for MyFile.pdf" dialog
12. Press ok in the Properties dialog.
done. -
With Reader XI There was an error opening this document. Access denied
Hi there, It looks like I have a simular problem. I also get the error "There was an error opening this document. Access denied." This when I tried to open the file by clicling on the file. When I try to open the file from out Adobe reader it gives me the error "You don't have permission to open the file" I use Adobe XI. My OS is W8.1 By clearing protected mode doesn't help. This is what I found sofar: Only the PDF files in the documents and subfolders are giving me this error. PDF files in other folders are fine. When I copy PDF files from the documents folder to Desktop they open without any problem. First I thought I might be a permission problem with the Documents folder, but I have full access. Other files in the Documents folder like Word and Excel files open fine with MS Office. My laptop has WinXP and is shared with my PC when I open PDF files on my laptop by using the network share they open without problems. So it looks like only the PDF files in my Documents folder. I'm not sure but before upgrading to W8.1 from W8.0 I can't remember if I had this problem, but I think I did not have it. To make it even more interested is that I have also Adobe Acrobat Writer on my PC what I use for my buisiness. When I open the PDF files with this program they open without any problem. Therefore I believe it is not a permission problem, I still believe it is a problem with Reader XI, but than only after upgrading to W8.1, but as I already mentioned I'm not sure for 100% only that sofar I know it never happened under W8. Has anyone out there simular problems? And hopefully with a fix.
This is what I did sofar: Deleted reader XI and reinstalled same problem.
Because I think the problem is with reader XI I deleted again XI and installed reader X.
With this version I can open PDF files located in the documents folder without any problem.
For now I keep using version X until they fixed version XI
This proves that reader XI will not work under W8.1 when opening PDF files in de documents folder.
Bennie
Maybe you are looking for
-
Have I bricked my motherboard?
Hello! I got the P67A-GD55 REV B3 which has worked good for the last years, but I could never overclock my i5 2500K processor. I read up about it and it was becuase I used the 4.3 version of the bios. I read a post on this forums saying that I should
-
Error with s_alr_87013019 tcode
Hi gurus! I have an error with s_alr_87013019 tcode. i have a purchase document that its pending and it must be showed on comitment column of s_alr_87013019. But the comitment column is empty and all the import is in the real column wich is no correc
-
Hi all, help me in the issue . I am passing value to a numc(3) field . lets take the value as '073' but it is showing as 073 in the output . How to acheive leading zero for the same in the output for a standard field. Thanks in advance
-
How can I change Dreamweaver editor backgrounds in CS5.5
I've recently upgraded from DW8 and have two small problems with the user interface. 1) I can't easily read the inactive document tabs on the documents bar (or whatever it is called) because the text is black and the background is dark gray. Is ther
-
while up-grading the IOS 6 to my iphone, the up-grade stop and now my screen does not stop to sart (apple) than shut down than restart (apple scree,) than shut down again