Testing after CPU patches
I have successful applied CPU July 2011 ( patch 12406914 and all the post patches)
However my functional consultant wants to know what is the functional impact of this patch so that she can just test these.
As you know CPU are generally have no functional impact and testing should be make sure all ok after patching. Quick and dirty testing.
anybody has a test plan / specific items to be tested after CPUs.
Thank a million in advance
Hi,
Shall i apply the patches in new home and skip post installtion steps which will be run after logging in database as that were done when database was 32 bit?It depends that how you migrated
As far as i know, directly copy paste of database files from 32 bit Linux to 63 bit Linux is not an appropriate way of migration, but, it i have seen this working fine, and if you adopted this method, i don't think that you need to execute post installation as your dictionary/plsql is already updated when you executed scripts on 32 bit.
If you used used transportable tablespaces method and converted files using RMAN, then you would already have done post installation tasks when you created new database on 64 bit before plugging in the transported tablespaces.
If you used export/import, even then you would have done all post installation tasks when you created new database on 64 bit before doing import.
Salman
Similar Messages
-
New Archived log entry in alert log after cpu patch 19 applied
Has anyone applied October critical patch for 11.1.0.7? I applied the cpu Patch 19 (8892977) for 11.1.0.7 on several windows2008 servers and after the patch the alert log displays a new message everytime a redo log transfers. This only happens on servers that have archivelog on. It looks like there is some kind of trace set. Anyone know know what the message is?
Thanks,
Kathie
Archived Log entry 10937 added for thread 1 sequence 10938 ID 0xa96e3908 dest 10:Hi Mark!
Yes, Oracle informed me that this message is normal and is only used for formational purposes. I should just ignore it.
Did you apply patch19? I have also found issues with a high amount of "waits" of type of "other". Some jobs are running slightly slower also. Also, if you check your "database health link" on dbconsole home page you will see consistant "non-critical" alerts. I don't have these alerts on servers not yet patched. This alerts appear to be caused by wait events of "other".
Kathie -
Dear colleagues,
Is any posilble check or test (benchmark) of DB performance before and after CPU patching?
Any testing SAP or SQL report, which makes a load on DB?
Thank you for advice.
Best Regards
Jakub Vaněk> Is any posilble check or test (benchmark) of DB performance before and after CPU patching?
> Any testing SAP or SQL report, which makes a load on DB?
Those test would be synthetic and may or may not reflect your current environment.
I'd check some long running reports in your environment if you see any difference.
Markus -
Sapstart fails after installation of CPU-Patch April2009 on Oracle 10.2.0.4
Hi Experts,
after installing the CPU-Patch April2009 for Oracle 10.2.0.4, startsap fails with error code 12.
Starting everything manually works (lsnrctl start, sqlplus and do startup, after that startsap works).
When the listener and the database are running, things like R3trans -x also work without errors.
I found a SAP-Note 97953 but I don't know if this is the solution. Some of the oracle-executables in the bin-directory have been modified. So there is a "oracle" and a "oracle0" . The timestamp indicates to me that these files were modified while implementing the CPU-Patch.
I also checked SAP-Note 583861but with no success.
regards
DirkHi Markus,
if the database ist down and I execute "R3trans -d" I'll get the following error.
R3trans -d
This is R3trans version 6.18 (release 710 - 08.10.07 - 13:37:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'QXI'"
R3trans finished (0012).
and trans.log looks like:
more trans.log
4 ETW000 R3trans version 6.18 (release 710 - 08.10.07 - 13:37:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 19.06.2009 - 09:36:55
4 ETW000 control file:
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 Fri Jun 19 09:36:55 2009 123 0.000123
4 ETW000 db_con_init called 17 0.000140
4 ETW000 determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 66 0.000206
4 ETW000 create_con (con_name=R/3) 21 0.000227
4 ETW000 Loading DB library '/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so' ...
4 ETW000 65 0.000292
4 ETW000 load shared library (/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so), hdl 0
4 ETW000 10039 0.010331
4 ETW000 Library '/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so' loaded
4 ETW000 26 0.010357
4 ETW000 function DbSlExpFuns loaded from library /usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so
4 ETW000 35 0.010392
4 ETW000 Version of '/usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so' is "710.16", patchlevel (0.6
0)
4 ETW000 75 0.010467
4 ETW000 function dsql_db_init loaded from library /usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.so
4 ETW000 26 0.010493
4 ETW000 function dbdd_exp_funs loaded from library /usr/sap/QXI/SYS/exe/uc/sunx86_64/dboraslib.s
o
4 ETW000 66 0.010559
4 ETW000 New connection 0 created 31 0.010590
4 ETW000 0: name = R/3, con_id = -000000001 state = DISCONNECTED, tx = NO , bc = NO , hc = NO , p
erm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 39 0.010629
4 ETW000 db_con_connect (con_name=R/3) 30 0.010659
4 ETW000 determine_block_commit: no con_hdl found as blocked for con_name = R/3
4 ETW000 24 0.010683
4 ETW000 find_con_by_name found the following connection:
4 ETW000 25 0.010708
4 ETW000 0: name = R/3, con_id = 000000000 state = DISCONNECTED, tx = NO , bc = NO , hc = NO , pe
rm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.010740
4 ETW000 Oracle Client Version: '10.2.0.2.0' 503 0.011243
4 ETW000 -->oci_initialize (con_hdl=0) 30 0.011273
4 ETW000 Environment NLS_LANG='AMERICAN_AMERICA.UTF8' 21 0.011294
4 ETW000 application info callback registered 16 0.011310
4 ETW000 Client NLS settings: 'AMERICAN_AMERICA.UTF8' 3166 0.014476
4 ETW000 Logon as OPS$-user to get SAPSR3's password 36 0.014512
4 ETW000 Connecting as /@QXI on connection 0 (nls_hdl 0) ... (dbsl BIN 220507)
4 ETW000 50 0.014562
4 ETW000 Nls CharacterSet NationalCharSet C EnvHp ErrHp Er
rHpBatch
4 ETW000 35 0.014597
4 ETW000 0 UTF8 1 2bcdc70 2bd56c0
2be5df8
4 ETW000 28 0.014625
4 ETW000 Allocating server context handle 35 0.014660
4 ETW000 Attaching to DB Server QXI (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 77 0.014737
4 ETW000 Assigning server context 2be8018 to service context 2be5d28
4 ETW000 25597 0.040334
4 ETW000 Starting user session (con_hdl=0,svchp=2be5d28,srvhp=2be8018,usrhp=2bd5ed8)
4 ETW000 71 0.040405
4 ETW000 OCI-call failed with -1=OCI_ERROR 3460 0.043865
4 ETW000 SQL error 1034: 'ORA-01034: ORACLE not available
4 ETW000 ORA-27101: shared memory realm does not exist 103 0.043968
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 51 0.044019
4 ETW000 server_detach(con_hdl=0,stale=1,srvhp=2be8018) 18 0.044037
4 ETW000 Detaching from DB Server (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 30 0.044067
4 ETW000 Deallocating server context handle 2be8018 from con_hdl=0
4 ETW000 233 0.044300
4 ETW000 *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 52 0.044352
4 ETW000 set_ocica() -> OCI or SQL return code 1034 26 0.044378
4 ETW000 OCIErrorGet -> SQL error code: 0 54 0.044432
4 ETW000 error text: 'ORA-01034: ORACLE not available 18 0.044450
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 Try to connect with default password 30 0.044480
4 ETW000 Connecting as SAPSR3/@QXI on connection 0 (nls_hdl 0) ... (dbsl BIN 220507)
4 ETW000 32 0.044512
4 ETW000 Nls CharacterSet NationalCharSet C EnvHp ErrHp Er
rHpBatch
4 ETW000 30 0.044542
4 ETW000 0 UTF8 1 2bcdc70 2bd56c0
2be5df8
4 ETW000 29 0.044571
4 ETW000 Allocating server context handle 17 0.044588
4 ETW000 Attaching to DB Server QXI (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 41 0.044629
4 ETW000 Assigning server context 2be8018 to service context 2be5d28
4 ETW000 23436 0.068065
4 ETW000 Assigning username to user session 2bd5ed8 23 0.068088
4 ETW000 Assigning password to user session 2bd5ed8 41 0.068129
4 ETW000 Starting user session (con_hdl=0,svchp=2be5d28,srvhp=2be8018,usrhp=2bd5ed8)
4 ETW000 33 0.068162
4 ETW000 OCI-call failed with -1=OCI_ERROR 2900 0.071062
4 ETW000 SQL error 1034: 'ORA-01034: ORACLE not available
4 ETW000 ORA-27101: shared memory realm does not exist 73 0.071135
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 55 0.071190
4 ETW000 server_detach(con_hdl=0,stale=1,srvhp=2be8018) 20 0.071210
4 ETW000 Detaching from DB Server (con_hdl=0,svchp=2be5d28,srvhp=2be8018)
4 ETW000 25 0.071235
4 ETW000 Deallocating server context handle 2be8018 from con_hdl=0
4 ETW000 144 0.071379
4 ETW000 *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 32 0.071411
4 ETW000 set_ocica() -> OCI or SQL return code 1034 16 0.071427
4 ETW000 OCIErrorGet -> SQL error code: 0 51 0.071478
4 ETW000 error text: 'ORA-01034: ORACLE not available 19 0.071497
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory'
4 ETW000 ***LOG BY2=>sql error 1034 performing CON 131 0.071628
4 ETW000 ***LOG BY0=>ORA-01034: ORACLE not available 21 0.071649
4 ETW000 ORA-27101: shared memory realm does not exist
4 ETW000 Solaris-AMD64 Error: 2: No such file or directory
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'QXI'"
If the database is up everything works. Here is the output of "R3trans -d"
R3trans -d
This is R3trans version 6.18 (release 710 - 08.10.07 - 13:37:00).
unicode enabled version
R3trans finished (0000).
For me this all looks o.k. when the database is down R3trans won't be able to reach it and if the database is up it works. But why I can't then just execute "sapstart" ?
Edited by: Dirk Rödl on Jun 19, 2009 9:46 AM
Edited by: Dirk Rödl on Jun 19, 2009 9:48 AM
Edited by: Dirk Rödl on Jun 19, 2009 9:49 AM -
CPU patch July 2010 on Oracle 11.1.0.7 database
Hi,
I want to install the July2010 CPU patch (9655014) on a 11.1.0.7 database which was initially created with version 11.1.0.6.
The README file of the patch states the following about recompiling views:
3.2.2.2 Recompiling Views in the Database
You may skip this section if you have recompiled views for this database during the installation of a previous CPU or if the database was created with Release 11.1.0.6 or later.
So I assumed that I do not need to recompile the views but a little further in the README file I read:
If you want to check whether view recompilation has already been performed for the database, execute the following statement.
SELECT * FROM registry$history where ID = '6452863';
If the view recompilation has been performed, this statement returns one or more rows. If the view recompilation has not been performed, this statement returns no rows.
When I execute the select it returns no rows. So this is confusing. Should I perform a view recompilation or not?
And when I execute recompile_precheck_jan2008cpu.sql (strange name for a July 2010 CPU) it says:
SQL> @recompile_precheck_jan2008cpu.sql
Running precheck.sql...
Number of views to be recompiled :1969
Number of objects to be recompiled :4019
Please follow the README.txt instructions for running viewrecomp.sql
PL/SQL procedure successfully completed.
thanks in advance.
regards,
IvanShort answer: you dont need to run view_recompile_jan2008cpu.sql
Long answer:
>
SELECT * FROM registry$history where ID = '6452863';
If the view recompilation has been performed, this statement returns one or more rows. If the view recompilation has not been performed, this statement returns no rows.
When I execute the select it returns no rows. So this is confusing. Should I perform a view recompilation or not?
>
You will only get an entry in registry$history if you had a database that you had actually run the view_recompile_jan2008cpu.sql script which inserts a row into the table at the end of the script:
view_recompile_jan2008cpu.sql
Rem =======================================================================
Rem Insert values for patch into registry.
Rem =======================================================================
INSERT INTO registry$history (action_time, action, id, comments)
values ( SYSTIMESTAMP, 'CPU', &&PATCH_NUMBER, '&&PATCH_DESC' );
COMMIT; In your case, you will get no entries in the table BUT you do not have to run the view recompilation so long as the database was created using a patched Oracle home of a release where Oracle says the view recompilation is not required.
>
SQL> @recompile_precheck_jan2008cpu.sql
Running precheck.sql...
Number of views to be recompiled :1969
>
This script has a very simple logic that just generates count of views and dependant objects that would need recompilation. The selection criteria does not include actually checking whether you actually need to apply the view recompilation script.
You can test this yourself:
Case#1: Run the recompile_precheck_jan2008cpu.sql on a database where you have applied the view recompilation script. You will find the count shows a non-zero value.
SQL> col action_time format a32
SQL> col version format a15
SQL> col version format a15
SQL> select action_time, version, id from registry$history where ID=6452863;
ACTION_TIME VERSION ID
24-JUL-10 12.52.15.390000 PM 6452863
SQL> @recompile_precheck_jan2008cpu.sql
Running precheck.sql...
Number of views to be recompiled :1637
Number of objects to be recompiled :3487
Please follow the README.txt instructions for running viewrecomp.sql
PL/SQL procedure successfully completed.Case#2: Create a new database using a version that does not require the view recompilation patch. Run the recompile_precheck_jan2008cpu.sql. You will find the view count shows a non-zero value even though you do not need to recompile the views as mentioned in the Oracle patch notes. -
We are in DOD -GOVT US marine corps.. WE are on 10.1.3.3.1 .. There is no CPU Patches for 10.1.3.3.1 nor
for 10.1.2.03-B2B
open issues/questions:
Open Issues:
1. What is Oracle's recommendation about upgrading 10.1.3.5 vs 10.1.3.4 (CPU Patch support length). Also CPU Patch support policy for BAM 10.1.3.3.1 and B2B 10.1.2.3.
2. Any MLRs to apply after upgrading SOA/BPEL/WSM/BAM/B2B 10.1.3.5 ?
3. Interoperability of OWSM 10.1.3.4, BAM 10.1.3.3.1, B2B 10.1.2.3 and SOA/BPEL 10.1.3.5. Can they co-exist or must they(one or more) be in same release level?
Thanks & Regards
SriHi , I am facing the same issue.
were you able to resolve it.
please let me know if you were.
Many Thanks. -
OAS 10.1.3.5 on Windows 64 bit, NO CPU patch for April?
After reading the CPU Advisory for April CPU 2011, it appears that for OAS 10.1.3.5 on Windows 64 bit, that there is NO CPU patch for April? It only shows a patch for Windows 32 bit. They do not mean that the 32 bit patch should also be applied on 64 bit Windows o/s having OAS 10.1.3.5? I just want to make sure I skip this CPU since I have 64 bit o/s.
I ask because the list of bugs fixed in the README for the 32 bit patch list 32 bit bug fixes , and then 64 bit bug fixes.
Edited by: user12152237 on May 9, 2011 6:17 PMSomu, please check a topic 3 lines below. No, there's not a separate 64-bit installer, but there's a work-around albeit not supported by oracle.
-
FTPing .zip CPU patch files...
Hi
I have downloaded a .zip file for Oracle CPU Patch and wants to move it to UINX server. After connecting the UNIX server, beofre I say "put <filename>"...do I have to say "binary"?
Your answer will be highly appreciated.
Thanks & Regards
Ahmed.Hello,
Besides the previous answer, generally (if you click on the patch detail) you have the size of the zip file in bytes.
For instance:
Size 1.1G (1123325074 bytes) So, once you have sent the zip file on the Unix server, you can check if it's size is correct.
Hope this help.
Best regards,
Jean-Valentin -
Java node 'server0' terminated with exit code 2150 after JSPM patches
Dear Experts,
We want to install SAP Netweaver 7.3 EHP1.
After applying patches SP11 from JSPM utility we tried to restart the SAP Java instances from SAP MMC.
But it failed to start with error code :
*** LOG => SfCJavaVm: exit hook is called. (rc = 2150)
*** ERROR => Java node 'server0' terminated with exit code 2150.
*** To resolve the issue, we restarted machine, Database services, SAP services but it still did not start.
*** Let us know if you need any other trace file for debugging.
Below is the log file:
stdout log file:-
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:10:29 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [16] ms
Objects read for [109] ms
Substituted the values for [94] ms
Finished reading kernel objects for [203] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [109] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... 2.296: [GC2.296: [ParNew: 343552K->8912K(381696K), 0.0251348 secs] 343557K->8917K(2059008K), 0.0253589 secs] [Times: user=0.03 sys=0.03, real=0.02 secs]
[125] ms
Loading [ThreadManager]... [32] ms
Loading [ClassLoaderManager]... [31] ms
Loading [ClusterManager]... [485] ms
Loading [LockingManager]... [63] ms
Loading [ConfigurationManager]... [1624] ms
Loading [CacheManager]... [141] ms
Loading [DatabaseManager]... [547] ms
Loading [SessionManager]... [515] ms
Loading [LicensingManager]... [32] ms
Loading [ServiceManager]...
Initialize components for : 94 ms.
Resolve components for : 31 ms.
Load components for 969 ms.
Loading services.
Calculate startup service set for 266 ms.
Service [tc~je~content~classification~handler] started. [16] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [16] ms / [0] CPU ms
Service [engine.lm.log.facade] started. [62] ms / [0] CPU ms
Service [engine.dsr.facade] started. [62] ms / [0] CPU ms
Service [webservices] started. [62] ms / [0] CPU ms
Service [tc~je~security~api] started. [62] ms / [0] CPU ms
Service [tc~je~cross~api] started. [62] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [62] ms / [0] CPU ms
Service [r3startup] started. [62] ms / [0] CPU ms
Service [security.destination.facade] started. [62] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [62] ms / [0] CPU ms
Service [tc~je~sca~jco.plugin] started. [110] ms / [0] CPU ms
Service [jmx_notification] started. [140] ms / [15] CPU ms
Service [cluster] started. [125] ms / [0] CPU ms
Service [runtimeinfo] started. [109] ms / [15] CPU ms
Service [memory] started. [297] ms / [31] CPU ms
Service [timeout] started. [297] ms / [15] CPU ms
Service [userstore] started. [297] ms / [0] CPU ms
Service [tc~sec~destinations~provider] started. [344] ms / [171] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 298078K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 84% used [0x000000013fe70000, 0x00000001518d3970, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157be4038, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 60K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 31907K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:10:46 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [16] ms
Objects read for [188] ms
Substituted the values for [78] ms
Finished reading kernel objects for [266] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [109] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... 2.406: [GC2.406: [ParNew: 343552K->8913K(381696K), 0.0187920 secs] 343557K->8919K(2059008K), 0.0190498 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
[141] ms
Loading [ThreadManager]... [31] ms
Loading [ClassLoaderManager]... [94] ms
Loading [ClusterManager]... [454] ms
Loading [LockingManager]... [47] ms
Loading [ConfigurationManager]... [1578] ms
Loading [CacheManager]... [78] ms
Loading [DatabaseManager]... [344] ms
Loading [SessionManager]... [296] ms
Loading [LicensingManager]... [16] ms
Loading [ServiceManager]...
Initialize components for : 78 ms.
Resolve components for : 16 ms.
Load components for 703 ms.
Loading services.
Calculate startup service set for 172 ms.
Service [webservices] started. [16] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [16] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [16] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [16] ms / [0] CPU ms
Service [r3startup] started. [16] ms / [0] CPU ms
Service [tc~je~cross~api] started. [31] ms / [0] CPU ms
Service [tc~je~security~api] started. [47] ms / [0] CPU ms
Service [engine.dsr.facade] started. [47] ms / [0] CPU ms
Service [engine.lm.log.facade] started. [47] ms / [0] CPU ms
Service [security.destination.facade] started. [47] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [47] ms / [0] CPU ms
Service [cluster] started. [62] ms / [15] CPU ms
Service [tc~je~sca~jco.plugin] started. [62] ms / [0] CPU ms
Service [jmx_notification] started. [46] ms / [0] CPU ms
Service [runtimeinfo] started. [62] ms / [0] CPU ms
Service [memory] started. [172] ms / [15] CPU ms
Service [tc~sec~destinations~provider] started. [234] ms / [109] CPU ms
Service [timeout] started. [266] ms / [31] CPU ms
Service [log_configurator] started. [312] ms / [46] CPU ms
Service [userstore] started. [312] ms / [31] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 298923K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 84% used [0x000000013fe70000, 0x00000001519a6a18, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157be45b8, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 60K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 31359K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
Service [locking] started. [47] ms / [0] CPU ms
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:11:02 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [16] ms
Objects read for [110] ms
Substituted the values for [93] ms
Finished reading kernel objects for [203] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [109] ms
Loading [PoolManager]... [0] ms
Loading [ApplicationThreadManager]... 2.297: [GC2.297: [ParNew: 343552K->9136K(381696K), 0.0230809 secs] 343557K->9142K(2059008K), 0.0233963 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
[125] ms
Loading [ThreadManager]... [31] ms
Loading [ClassLoaderManager]... [16] ms
Loading [ClusterManager]... [501] ms
Loading [LockingManager]... [62] ms
Loading [ConfigurationManager]... [1500] ms
Loading [CacheManager]... [125] ms
Loading [DatabaseManager]... [453] ms
Loading [SessionManager]... [406] ms
Loading [LicensingManager]... [32] ms
Loading [ServiceManager]...
Initialize components for : 110 ms.
Resolve components for : 32 ms.
Load components for 953 ms.
Loading services.
Calculate startup service set for 265 ms.
Service [tc~je~security~api] started. [16] ms / [0] CPU ms
Service [webservices] started. [16] ms / [15] CPU ms
Service [engine.lm.log.facade] started. [0] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [0] ms / [0] CPU ms
Service [engine.dsr.facade] started. [0] ms / [0] CPU ms
Service [r3startup] started. [0] ms / [0] CPU ms
Service [tc~je~cross~api] started. [0] ms / [0] CPU ms
Service [security.destination.facade] started. [32] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [32] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [32] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [32] ms / [0] CPU ms
Service [tc~je~sca~jco.plugin] started. [47] ms / [15] CPU ms
Service [jmx_notification] started. [125] ms / [31] CPU ms
Service [runtimeinfo] started. [109] ms / [15] CPU ms
Service [cluster] started. [109] ms / [0] CPU ms
Service [userstore] started. [156] ms / [15] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
Service [timeout] started. [235] ms / [31] CPU ms
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 275035K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 77% used [0x000000013fe70000, 0x000000015021acd0, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157c1c238, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 59K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 29998K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
Service [memory] started. [312] ms / [46] CPU ms
stdout/stderr redirection
node name : server0
host name : INPUNEME01
system name : ME2
system nr. : 00
started at : Thu Jul 17 00:11:18 2014
JVMX version - Jun 22 2014 00:31:35 - 61_REL - optU - windows amd64 - 6 - bas2:220276 (mixed mode)
(CompilerOracle read from file C:\usr\sap\ME2\J00\exe\sapjvm_6\jre\.hotspot_compiler)
The active factory is : com.sap.engine.boot.loader.StandardClassLoaderFactory
Class loading cache information loaded from package index [C:\usr\sap\ME2\J00\j2ee\cluster\bin\index.list]
Reading manager properties from [kernelProperties.bin] file
Checked the data for [15] ms
Objects read for [109] ms
Substituted the values for [94] ms
Finished reading kernel objects for [203] ms
Startup mode [NORMAL] and action [NONE] read
AS Java version [7.31.3710.148365.20111012091351] is starting server process [ID3448650] on host [INPUNEME01.India.***.com] ...
Loading [LogManager]... [94] ms
Loading [PoolManager]... [16] ms
Loading [ApplicationThreadManager]... 2.267: [GC2.268: [ParNew: 343552K->9051K(381696K), 0.0218818 secs] 343557K->9057K(2059008K), 0.0221899 secs] [Times: user=0.06 sys=0.00, real=0.02 secs]
[156] ms
Loading [ThreadManager]... [31] ms
Loading [ClassLoaderManager]... [16] ms
Loading [ClusterManager]... [485] ms
Loading [LockingManager]... [62] ms
Loading [ConfigurationManager]... [1297] ms
Loading [CacheManager]... [141] ms
Loading [DatabaseManager]... [437] ms
Loading [SessionManager]... [406] ms
Loading [LicensingManager]... [16] ms
Loading [ServiceManager]...
Initialize components for : 110 ms.
Resolve components for : 31 ms.
Load components for 953 ms.
Loading services.
Calculate startup service set for 265 ms.
Service [engine.lm.log.facade] started. [16] ms / [0] CPU ms
Service [tc~esi~uddi~content~handler] started. [16] ms / [0] CPU ms
Service [tc~je~mngt_model~srv] started. [16] ms / [0] CPU ms
Service [webservices] started. [16] ms / [0] CPU ms
Service [engine.dsr.facade] started. [16] ms / [0] CPU ms
Service [tc~je~cross~api] started. [16] ms / [0] CPU ms
Service [r3startup] started. [32] ms / [0] CPU ms
Service [tc~je~security~api] started. [32] ms / [0] CPU ms
Service [security.destination.facade] started. [32] ms / [0] CPU ms
Service [tc~je~content~classification~handler] started. [16] ms / [0] CPU ms
Service [tc~je~sca~ws.plugin] started. [16] ms / [0] CPU ms
Service [runtimeinfo] started. [47] ms / [15] CPU ms
Service [tc~je~sca~jco.plugin] started. [47] ms / [0] CPU ms
Service [jmx_notification] started. [63] ms / [0] CPU ms
Service [cluster] started. [47] ms / [15] CPU ms
Service [timeout] started. [172] ms / [93] CPU ms
Service [userstore] started. [140] ms / [31] CPU ms
Service [memory] started. [172] ms / [15] CPU ms
Service [cross] start ================= ERROR =================
CSN Component [BC-JAS-COR-RMT], DC Name [sap.com/cross]
java.lang.NoSuchFieldError: ipaddress
at com.sap.bc.proj.jstartup.fca.FCAProperties.init1(Native Method)
at com.sap.bc.proj.jstartup.fca.FCAProperties.init(FCAProperties.java:54)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.<init>(FCAConnectorImpl.java:101)
at com.sap.engine.services.cross.CrossFrame.start(CrossFrame.java:82)
at com.sap.engine.core.service630.container.ServiceRunner.startFrame(ServiceRunner.java:165)
at com.sap.engine.core.service630.container.ServiceRunner.startService(ServiceRunner.java:118)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:65)
at com.sap.engine.frame.core.thread.Task.run(Task.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:178)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:316)
FATAL: Critical shutdown with exit code [2150] was requested due to [AS Java cannot be started; core service [cross] failed to start]
Heap
par new generation reserved 419840K, committed 419840K, used 277992K [0x000000013fe70000, 0x0000000159870000, 0x0000000159870000)
eden space 343552K, 78% used [0x000000013fe70000, 0x0000000150513298, 0x0000000154df0000)
from space 38144K, 23% used [0x0000000157330000, 0x0000000157c06fd0, 0x0000000159870000)
to space 38144K, 0% used [0x0000000154df0000, 0x0000000154df0000, 0x0000000157330000)
concurrent mark-sweep generation reserved 1677312K, committed 1677312K, used 59K [0x0000000159870000, 0x00000001bfe70000, 0x00000001bfe70000)
concurrent-mark-sweep perm gen reserved 1048576K, committed 1048576K, used 30982K [0x00000001bfe70000, 0x00000001ffe70000, 0x00000001ffe70000)
Thanks and Regards,
Muddassar KhanHi Muddassar,
Hope you are doing good.
A new note has been released exclusively for this issue. Please see:
note 1937296 - SUM fails at start-shadow-instance-dm step. This is not
an issue with the SCAs and more with the kernel employed.
You will need to make sure that you are on the latest kernel so that
this can be resolved.
The below links will help you if there are any queries with the
kernel update procedure
SAP Note No. 1636252 - Installing a 7.20 kernel in SAP Web AS
7.00/7.01/7.10/7.11
SAP Note No. 1629598 - SAP Kernel 720 will replace older
kernel versions
SAP Note No. 19466 - Downloading SAP kernel patches
Also check:
<http://scn.sap.com/docs/DOC-1206>
(for Manual Kernel Upgrade)
and
<http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/11219>
(for kernel upgrade using JSPM)
Thank you and have a nice day!
Kind Regards,
Hemanth -
Hi,
Could someone please explain me what CPU patches are. Is it some security patch?
Is it mandatory to apply these patches every quarter. And if we apply, will there be any performance related issues?
Thanks!The application of the Oracle quarterly patch CPU set is optional. If your testing requirements are too high to make application of multiple patches per year impractical then you might just apply every other or even one of the patch sets per year. The CPU patches are cumulative so if you apply the most recent you have all the prior patches.
The above is providing you do not need a specific fix provided by one of the patch sets. You current version of Oracle and when you plan to upgrade may also be a factor in determining if you need/want to apply a specific CPU.
HTH -- Mark D Powell -- -
SOA BPEL 10.1.3.5.0 CPU Patches
We are on 10.1.3.3.1 at US Marine Corps -Department of Defense
We dont have a security patches for 10.1.3.3.1
open issues/questions:
Open Issues:
1. What is Oracle's recommendation from Oracle about upgrading 10.1.3.5 vs 10.1.3.4 (CPU Patch support length). Also CPU Patch support policy for BAM 10.1.3.3.1 and B2B 10.1.2.3.
2. Any MLRs to apply after upgrading SOA/BPEL/WSM/BAM/B2B 10.1.3.5 ?
3. Interoperability of OWSM 10.1.3.4, BAM 10.1.3.3.1, B2B 10.1.2.3 and SOA/BPEL 10.1.3.5. Can they co-exist or must they(one or more) be in same release level?
What is the supported method
Please advise
thanks
sriDid you find a solution to this issue? We are having a similar issue trying to deploy a Paypal IPN on OAS 10.1.2.3. The IPN messages coming from Paypal appear to be attempting an SSLv2 handshake. In our case SSLv2 is disabled due to our security requirements so the connection is killed by our App Server. We have found that manually sending the IPN messages works correctly.
-
Hello all,
Using ML 10.8.1 and Safair 6.0
After Java patch 1.7.0_07 ENable applet plug-in and Web start checkbox is gone! The check box to enable Safari to load Java pages is 100% gone, missing, just not there anymore.
When I go to the Java test page it shows that I have Java 7 loaded. Has anyone else run into this problem or have a solution to enable true load loading in Safari and bring back the Enable applet plug-in and Web Start application check box in ML...
ThanksI found out something very interesting. I noticed that another page would show up for less than have a second before the ML Java Preference would show up. I did a video recording of this and moved frame by frame. I show that the page / pane showing up had the following option:
Run applets: in their own process
within their browser process
Both boxes for the two are unchecked.
Then this page would disappear and nother would show up without the option / check box
Enable applet plugin and Web Start applications
Strange -
Database rolling upgrade cpu patch with minimal service outage
Oracle 11gR2 Primary Instance
Oracle 11gR2 Active Physical Standby
Requirement of applying CPU and CVE patches with minimal downtime. I believe that I've been able to apply CPU patch to Active Standby after deferring redo transport and applying patch to active physical standby first and then performing a manual switchover to have the standby become the primary and former-primary become the standby and they apply CPU Patch there and then perform another role transition to its original role.
Appreciate your experience with primary and active physical standby rolling upgrades/patches. ThanksHello;
I believe you are over thinking this. All you have to do on the Standby is install the patch. No switchover, no SQL. No nothing.
The SQL will move from the Primary to the Standby.
Check the readme for the patch closely or post the patch number if you want to confirm.
OR
How do you apply a Patchset,PSU or CPU in a Data Guard Physical Standby configuration [ID 278641.1]
( If it helps I had the same thoughts after my first Data Guard setup !! )
If you are trying to avoid downtime entirely the switchover will take about as long as the patch.
If you have RAC this is interesting :
http://javeedkaleem.blogspot.com/2010/05/how-to-apply-oracle-database-patch.html
As is this :
http://docs.oracle.com/cd/B28359_01/server.111/b28282/schedule_outage.htm
Best Regards
mseberg -
Do we need to run catbundle.sql for ANY new db we create after CPU's?
We're in the middle of reviewing the JAN2009CPU readme, and found a curiosity in the patch notes.
- Our platform is Oracle 10.2.0.4 Enterprise Edition on Solaris 10 64-bit.
In the Post-Patch instructions for the CPU, we see the following clause
{color:#3366ff} ...
3.3.5, "Post Installation Instructions for New and Upgraded Databases"
These instructions are for both non-RAC environments and RAC environments
when a database is created or upgraded after the installation of CPUJan2009.
You must execute the steps in Section 3.3.2.1, "Loading Modified .sql Files
into the Database"" and Section 3.3.2.2, "Recompiling Views in the Database"
for *any new database that was created* by any of the following methods:
- Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
- Using a script that was created by DBCA that creates a database from a sample database
- Cloning a database that was created by either of the two preceding methods,
and if Section 3.3.2.1, "Loading Modified .sql Files into the Database"
was not executed after CPUJan2009 was applied.
Upgraded databases require no post-installation steps to be executed.
{color}
I don't understand -- does this mean we have to do the following any time
we create a new database from now on?
- run dbca
{color:#ff0000} - run '@?/rdbms/admin/catbundle.sql cpu apply'
- check $ORACLE_HOME/cfttoollogs/catbundle/catbundle_CPU_<SID>_APPLY_<TimeStamp>.log for errors
- run '@?/cpu/view_recompile/view_recompile_jan2008cpu'{color}
I would have thought that the new SQL scripts under $ORACLE_HOME are already
upgraded, so that we do not *have* to do any extra work on top of simply running
dbca to create a new DB.
I see a similar phrase in the CPU2008JUL (patch 7150470):
{color:#0000ff} "You must execute the steps in this section (Section 3.3.2.1,
"Loading Modified .sql Files into the Database") for any new database you create
or any database upgraded to this release since the CPUJul2008 patch was applied."
{color}
.. AND CPU2008OCT (patch 7375644):
{color:#0000ff} You must execute the steps ... for any new database you create or
any database upgraded to this release since the CPUOct2008 patch was applied.
{color}
.. but the April 2008 CPU (patch 6864068) doesn't have these clauses.
Can anybody clarify this issue? Have you created DB's after the JAN2009 CPU
and not run the catbundle.sql, had any problems?
Edited by: lrp on Feb 4, 2009 2:45 PMlrp wrote:
We're in the middle of reviewing the JAN2009CPU readme, and found a curiosity in the patch notes.
- Our platform is Oracle 10.2.0.4 Enterprise Edition on Solaris 10 64-bit.
In the Post-Patch instructions for the CPU, we see the following clause
{color:#3366ff} ...
3.3.5, "Post Installation Instructions for New and Upgraded Databases"
These instructions are for both non-RAC environments and RAC environments
when a database is created or upgraded after the installation of CPUJan2009.
You must execute the steps in Section 3.3.2.1, "Loading Modified .sql Files
into the Database"" and Section 3.3.2.2, "Recompiling Views in the Database"
for *any new database that was created* by any of the following methods:
- Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
- Using a script that was created by DBCA that creates a database from a sample database
- Cloning a database that was created by either of the two preceding methods,
and if Section 3.3.2.1, "Loading Modified .sql Files into the Database"
was not executed after CPUJan2009 was applied.
Upgraded databases require no post-installation steps to be executed.
{color}
I don't understand -- does this mean we have to do the following any time
we create a new database from now on?
- run dbca
{color:#ff0000} - run '@?/rdbms/admin/catbundle.sql cpu apply'
- check $ORACLE_HOME/cfttoollogs/catbundle/catbundle_CPU_<SID>_APPLY_<TimeStamp>.log for errors
- run '@?/cpu/view_recompile/view_recompile_jan2008cpu'{color}
I would have thought that the new SQL scripts under $ORACLE_HOME are already
upgraded, so that we do not *have* to do any extra work on top of simply running
dbca to create a new DB.
I see a similar phrase in the CPU2008JUL (patch 7150470):
{color:#0000ff} "You must execute the steps in this section (Section 3.3.2.1,
"Loading Modified .sql Files into the Database") for any new database you create
or any database upgraded to this release since the CPUJul2008 patch was applied."
{color}
.. AND CPU2008OCT (patch 7375644):
{color:#0000ff} You must execute the steps ... for any new database you create or
any database upgraded to this release since the CPUOct2008 patch was applied.
{color}
.. but the April 2008 CPU (patch 6864068) doesn't have these clauses.
Can anybody clarify this issue? Have you created DB's after the JAN2009 CPU
and not run the catbundle.sql, had any problems?
Edited by: lrp on Feb 4, 2009 2:45 PMIt's pretty explicit:
*You must execute the steps* in Section 3.3.2.1, "Loading Modified .sql Files
into the Database"" and Section 3.3.2.2, "Recompiling Views in the Database"
for any new database that was created <b><i><u>by any of the following methods</u></i></b>:
- Using DBCA (Database Configuration Assistant) to select a sample database (General, Data Warehouse, Transaction Processing)
- Using a script that was created by DBCA that creates a database from a sample database
- Cloning a database that was created by either of the two preceding methods,
and if Section 3.3.2.1, "Loading Modified .sql Files into the Database"
was not executed after CPUJan2009 was applied.
So, if you create a database by any of the explicitly listed methods (all of which are creating a database from a backup that my have been made of a database that was not patched to that level) then you need to run the scripts. If you create a database by some other method (about all that is left is a command line CREATE DATABASE) then part of that creation will necessarily include running the necessary cat* scripts, which will already be at the correct level. -
OC4J error after installing patch 9.0.2.2
Hello, after installing patch 9.0.2.2 and trying to access the rwservlet I get this error
java.lang.UnsatisfiedLinkError: no rwu90 in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1349)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at oracle.reports.util.Environment.<init>(Unknown Source)
at oracle.reports.server.RWServer.startServer(Unknown Source)
at oracle.reports.server.RWServer.run(Unknown Source)
at java.lang.Thread.run(Thread.java:484)
here is what my startinst.sh script looks like
/u01/app/oracle/product/9idev/jdk/bin/java -Dorg.omg.CORBA.ORBClass=com.inprise.vbroker.orb.ORB -Dorg.omg.CORBA.ORBSingletonClass=com.inprise.vbroker.orb.ORB -Doracle.security.jazn.config=/u01/app/oracle/product/9idev/j2ee/Oracle9iDS/config/jazn.xml -Doracle.home=/u01/app/oracle/product/9idev -DORACLE_HOME=/u01/app/oracle/product/9idev -jar /u01/app/oracle/product/9idev/j2ee/home/oc4j.jar -userThreads -config /u01/app/oracle/product/9idev/j2ee/Oracle9iDS/config/server.xml >/u01/app/oracle/product/9idev/j2ee/Oracle9iDS/log/stdout.log &
It was working fine on 9.0.2.0 I could run reports and forms off the web. I can access the HTTP OC4J server ok, just cant run any reports or forms. Please help. I changed no files after the patch.correction, i can run the test web form, its the report servlet that doesnt work.
Maybe you are looking for
-
I HATE IOS 5!!! Since I have updated, my iPod has re-set itself 12 times now without any reason (it was literally across the room oftentimes) If i bother to download the apps I purchased (forget about the back up I thought I'd made in iCloud...doesn'
-
How to open File open/save dialog for a file saved in the Appl. Server?
Hi Experts, My requirement is that, there will be a link in my BSP page "Link to BI Report" and when the user will click this link, the File open/save Dialog box will appear for a BI Report file that will be in a fixed path in the Application Serv
-
Hi, I imported RFC model in Web Dynpro application. One of imported fields is date. I'll like to change date format. How I can changed it? Thanks Vedran
-
Any way I can view received messages online ?
My phones not turning on so I've been using imessage on my mac, i usually sign out of it so no peeping could happen but I'm afraid I'm missing some messages being sent to me. Is there any way I can view the messages that have already been sent and no
-
Looking for the LMS based on SharePoint
Hi, We are using MOSS 2007 and are looking for the Learning Management system, wich could be integrated. Found SharePointLMS (http://www.sharepointlms.com/) and Sharepoint Learning Kit Any other suggestions? May be someone can compare these two at li