Testing BW Statistics (Technical Content)

Hello ever one,
need some help in testing BW Statistics.
I have install all standard 6 cube and 1 multiprovider in Dev.
Every thing went fine,I am facing problem in testing,
as i am comparing BW Statistics Report out come with
BW objects (such as Cube/ODS-records/deleted records)
which are no where matching with BW Statistics report.
Is their any specific setting i have missed out coz of this
its not giving correct report ?
or some thing else need to be done for testing.
please let me know.
Thanks & Regards.

MWM,
Is this with respect to :
1. Requests being deleted ?
2. Selective deletion ?
Also what is the nature of mismatch - the records do not tally ?
2. There are no records in statistics ?
Try refreshing stats for the cubes and then reload technical content once again.. also check the same in table RSDDSTAT.
Arun

Similar Messages

BI Statistics Technical Content Activation Error

I got some errors when activating BI Statistics technical content in SPRO and could not find any information about this error on SDN. I would really appreciate your help.
Thank you.
Tony
Below is part of the error message from job log:
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
A type "Activate DataStore Object Data" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in th
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_E8U9KCLMI7HW76ZSYTSL0N7NA in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_EAYZPOK7VL8KCD6D6HI3UYUT2 in the chain
A type "Generate Index" process has to follow process "Execute InfoPackage" var.0PAK_44I75TQHBEZKMPJT67XC0VKQJ in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_472D695A0ZS3DWVBA4H1OO9A6' of process type 'LOADING' not found in A version
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_472D695A0ZS3DWVBA4H1OO9A6 in the chain
Version 'M' of chain 0TCT_C0_DELTA_P01 was saved without checking
Start of Process Chains
ABAP/4 processor: UNCAUGHT_EXCEPTION
Job cancelled

Hi Ramesh,
That's the point. Admin cockpit pops up a message:
"Before you can call the BI Administration Cockpit, the technical content has to be installed and customized."

Statistics technical content activation issue with MD process chain in BI7

Hi,
Let me give you history of the issue first.
I had to activate the Statistics in BI7. I followed the SAP Note 965386 and activated the Technical Content.
Faced activation issues in MD process chain, Content Master Data-0TCT_MD_C_FULL_P01. It dint get activated, Followed the SAP note 1065919, which asked me to remove the below process from RSPC and activate it.
Load data- Process Variant Attribute and
Load data- Process Variant Text.
I did the same and it got activated after removing them.
Issue is. Later knew that manually activating the Process chain from Content would have activated those Infopackages aswell.
Now how should I get those processes into the chain and activate? Based on your suggestions, I can let you know what all I have been trying to fix it?
Relying on you for solution.
Thanks
Pavan

Thank You Neethika,
I have this issue solved. I replicated the data sources, activated those infoPackages manually and then added those variants into the process chain manually. So my MD chain now has all the necessary process.
Now i need to schedule them and see if it runs with out any errors. I will keep this thread open till i run it to take your help if i get any errors while running them.
Thanks
Pavan

Process Chains for BW Statistics (Technical Content)

Hi Guys,
Just a quick question - anyone know of any Business Content Process Chains for BW Statistics?
I can't seem to find any - but just looking for confirmation that none exist and I will then have to built my own.
Thanks
Scott

Hi,
Yes, you have to build your own. Thats the same scenario we faced too.
With Regards

Why process chains for BI statistics Technical Content are not showing in 0

I am looking into 0TCT_MC21 which shows process statistics from 0TCT_C21 and 0TC_VC21.
I know process chains such as 0TCT_C2_DELTA_PO1, 0TCT_C2_INIT_PO1 have been run, yet
They do not show in 0TCT_MC21 which included real time data (via virtual cube) as well as
Collected data 0TCT_C21u2026
Do I have to specify somewhere on which process chains statistics are to be collected, if yes, how??
Thanks.

Hi,
Have you checked this existing thread:
/message/3214515#3214515 [original link is broken]
Regards,
Lee

Technical Content(Statistics)

Hi,
Previously I installed the BI statistics manually (not over SPRO). During the activation the system created datasources in all conected systems like R/3 dev. system. Also the activated process chains include the delta loads from these R/3 based datasources.
My doubt is, the existing dataload steps in the process chains might be wrong. Can anyone tell me which datasources should be used from R3 side and which should be the BW based?
The process chains I mentioned are:
Content Master Data
System Master Data
Data Load Statistics - Delta
Load Statictics Data Delta
Query Runtime Statistics - Delta
Thanks
Senoy

Senoy,
Statistics load from BW only. Not from R/3. all data sources are from BW only.
Please check:
[BI7: Administration Cockpit Technical Content BI Statistics|http://sapbwneelam.blogspot.com/2008/10/administration-cockpit-technical.html]
[BW 3.5: How to setup bw statistics|https://www.box.net/shared/us1b13ijq2]
Hope it Helps
Srini
[Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

Technical content for the BI statistics

Hi Guru's
What is technical content for the BI statistics and where do I find this???
I want to know what is the procedure to know which query is mostly executed in the system and by how many users.
Thanks & Regards.

Hi,
What is technical content for the BI statistics and where do I find this???
you can enable this facility
go to RSA1> tools >bw statistics>here we have two options like OLAP,WHM ,if you chk OLAP for the respective cube,now it will display all the related infromation i.e all the details of the queries pertaining to the cube
WHM will store all related data staging related information
want to know what is the procedure to know which query is mostly executed in the system and by how many users
the below cubes will meet your requirement
0BWTC_C10_Q011 OLAP Use per User
0BWTC_C10_Q506 OLAP Use per User (Total Number of Records)
0BWTC_C10_Q505 OLAP Use per User (Total Time)
0BWTC_C10_Q503 OLAP Use per User (Time)
chk the below link
http://help.sap.com/saphelp_nw04/helpdata/en/88/3e1f3b5839e10fe10000000a114084/content.htm
Once you install technical content you can use the features of BW statistics etc..
Cheers,
Swapna.G

Technical Content and BI statistics

Hi
I am installing Technical content. Here i am not sure which one to install. Under technical content infoarea we have
1.Integrated planning
2. BI trace tool
3. Bex personalization
4. Exchange rates types
But under under business information warehouse, we have BI statistics and under these we have TCT_C01, C02, C03, TCT_V01, V02 and so on.
Here i am not sure which one i need to install, would anyone plz guide me thur this.
Regards
Annie

Any replies??
And also after installing the 0TCT_V01, V02, V03, 0TCT_C01,02,03. from the business content.
In the infopackages in update tab, by default the "initialize delta process" "without data transfer is selected".
So should we run initialize delta process withoudt data transfer first and then run delta?
Regards
Annie

BW 3.x technical content and BW 7.0 BI statistics

Dear all,
After we upgarde from BW 3.1 to 7.0 , does the old BW 3.1 technical content still collect data to those 3.1 statistics table? Or , we need to migrate to the new 7.0 BI statistics ?
Thank you,
Jeff

Just find the answer in note 955990

BW Statistics and Technical Content

HI,
I am working on BI 7.0.
I understand both BW statistics and Technical content are used to monitor the system status to improve performance. But what I dont get is teh exact difference between these two.
BW statistics provides the follwing Dataprovider:
0BWTC_C02     BW Statistics - OLAP
0BWTC_C03     BW Statistics - OLAP, Detail Navigation
0BWTC_C04     BW Statistics - Aggregates
0BWTC_C05     BW Statistics - WHM
0BWTC_C09     BW Statistics: Condensing InfoCubes
0BWTC_C11     BW Statistics: Deleting Data from InfoCubes
Whereas Technical content provides following:
0TCT_C03     Data Manager Statistics (Details)
0TCT_C22     DTP Statistics
0TCT_C01     Front End and OLAP Statistics (Aggregated)
0TCT_C02     Front End and OLAP Statistics (Details)
0TCT_C23     Infopackage Statistics
0TCT_C21     Process Chain Statistics
Please advice
Regards
Pankaj

Thanks...
but in the following link of 7.0 saphelp, it still shows the BW statistics cube 0BWTC* and so is the confusion whether to use 0BWTC* also aprt from using 0TCT*
http://help.sap.com/saphelp_nw70/helpdata/en/44/10cb9a8f345cf9e10000000a155369/frameset.htm
Regards
Pankaj

Variable in technical content

Hi all,
In the TECHNICAL CONTENT of my system I have a variable for the Exchange Rate Type (0RTYPE)called Z_RTYPE. When I run a query that use the currency conversion type this variable pops up in the variable screen, but it is not specifically added to my query.
Because this is not added to my query I cannot see this variable in the "Query Properties", which I need to be able to sort it.
Is there some way to add this variable from the technical content to my query?
Best regards,
TMV

Hi Pank,
For all the Queries/Workbooks for which you want to collect Stats and see them in Reports, you have to activate or mark them/relevant Infoproviders in Datawarehousing Workbench.Tools> BI Statistics Settings.
For the new statistics, you have to determine the objects for which you want to update the statistics and to what level of detail. You call this dialog from the Data Warehousing Workbench. It has changed completely from the previous statistics functionality.
In addition, you can manually assign a priority to the queries, InfoProviders and process chains. This priority is evaluated in the statistics. This can be used to establish a ranking or to exclude objects from the display in a report.
Please search in SAP Help, you will get more stuff.
http://help.sap.com/saphelp_nw70/helpdata/en/43/15c54048035a39e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ef/372242c4e05033e10000000a155106/frameset.htm
Thanks
CK

Technical content ** NW 2004s ** Please help

Hi,
When i check the reports of the technical content, i can only see the the Techcnical name of the Info Package.
Even if i choose display as " Key & Text " still unable to see the Ipak descreption in the report.
I have checked old 3.X statistics, i think, its the same issue there aswell.
Please help.
Thanks,
Nisha

Hi Srilatha,
I have applied the SAP Note 1088038 and tried loading 0tctprcsvar_text.
When i have checked in PSA, i can see the descreption of the Ipak.
But, if i maintain the master data and see that, the long descreption is blank.
Its not getting populated.
Please advise.
Thanks,
Nisha

Technical Content

we have just finish the BI7 ugprade.
When I run RSA1 (for the first time), it says the job BI_TCO_ACTIVATION is schedule and run in the background. I check on the website site and it says this Job will activate the Technical Content.
1) Question is why it automatically activate the Technical Content?
2) I thought it is up to us to decide if we want to install and activate the Technical Content from RSA1 ->Business Content?
3) Now the job is finished and it seems like some of the Technical Content have been activated a appear in RSA1.
4) Can I just delete them from the RSA1?
What should I do?
Please help.

BI_TCO_ACTIVATION automatically install the technical contents when you execute RSA1 tcode for the first time after system upgrade.
Technical contents consists of objects related to BI statistics, distributed statistics records etc. Which are different than the business content which we installs manually.
The technical BI Content must be installed or activated. The technical Content is installed automatically in the background (job name BI_TCO_ACTIVATION) when you execute RSA1 for the first time. For the other installations, you should wait until the job BI_TCO_ACTIVATION is completed. (OSS NOTE 979581)
You can have a look at OSS note 979581.

Technical content activation for BI STAT and Admin cockpit

Hi friends,
I am going to setup the IMG call for BI STAT and Admin cockpit. If i run the technical content activation will i need a precaution for other data loading. If i run them in background does it affects other data loads. did i need to take down time for the whole system?
After the implemntation did i need to load data for all infoproviders in quality system.

Hello Suresh,
I am not clear on all your questions.
In general, technical content process chains load data similiar to other BI process chains.
if your system is productive for a longer period already ( > 6 months ), there may be a lot of
BI statistics data generated and this will take a longer time to load the technical content cubes during the initial load.
Otherwise, it should not affect system performance.
It is better to schedule them daily to avoid huge data loads.
But these are only guidelines. It depends on your need.
You would need to do separately for quality and production system, if you want the BI stats in those systems. This is similiar to any other Data load and cube and content in BI.
Thanks,
Bilal

Technical Content Cube for Multi Provider Information???

Hi all,
Can anyone suggest which Technical Content Cube will give Information about Multi Provider and its underlying Info Providers(Last load tiem of Info Provider)?.
Thanks
Deepika

Hi,
We have tables which gives the information about that, if u want u can create a view on these tables in RSO2 in BW and load the data to the Zcube.
Below are the tables.
RSDCUBE - Directory of InfoCubes
RSDCUBEIOBJ - Objects per InfoCube (where-used list)
RSDDIMEIOBJ -
RSDCUBEMULTI -InfoCubes involved in a MultiCube
RSDICMULTIIOBJ - MultiProvider Selection/ Identification of InfoObjects
Sorry for the post its my misunderstanding....
For bw statistics the above post will help u....
Khaja
Edited by: khaja on Feb 25, 2008 12:46 PM

Testing BW Statistics (Technical Content)

Similar Messages

Maybe you are looking for