Testing IDOC in we19

HI,
You are sending up the right information in WE19 in IDOC control record.
If you will be sending the IDOC outside R/3 then its Outbound in Partner Profile if it is incoming then its inbound.
But you need to import the IDOC meta data in XI as without this your try to send IDOC will fail.
How To Configure IDoc Adapters
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Follow the steps
No message in found in XI in IDOC to FILE scenario
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/error%2bhandling%2bin%2bfile-idoc%2bscenario
Refer below links for indepth troubleshooting
File to IDOC, trouble shooting
Refer below steps
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Thanks
Swarup

Hey,
       If your Idoc is Sender Idoc.
       1) WE20(R3):- Idoc in Outbound Message type
                       It will ask you for port
                       This is the port that you have created   towards XI in R3(i.e WE21)
    2)IDX2(XI):-Create a new Meta data and the Idoc Type
    3) WE19(R3):-
       Reciever
        Port: the one created in R3(pointing to XI)
        Partner No:-Logical system that you have created in SALE for XI
        Part type: LS
    Sender
   Port: No need to give (self-generated)
    Partner No:- Logical system that you have created in SALE for R3(i.e to which you have assigned a client)
Part type: LS
rewards points if useful.
regards,
         Milan

Similar Messages

Dump while testing Idoc from WE19-OBJECTS_OBJREF_NOT_ASSIGNED

Hi Experts,
I am trying to Post inbound PO idoc from we19 tcode.
MessageType:PORDCR1
Idoctype:PORDCR102
FM:BAPI_IDOC_INPUT1
while testing this Idoc it is going dump.
Runtime Errors     :    OBJECTS_OBJREF_NOT_ASSIGNED
Short text            :    Access via 'NULL' object reference not possible.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "PROCESS_COMPONENTS" "(FORM)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: "L_ITEM").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Could you plz suggest how to resolve this issue.
regards,
Bhuvan.

Hi,
Please implement the OSS Note 1409498 (Relavent to your problem).
I am sure it will resolve your issue.
If not solving your than You can serch for relavent SAP note on SAP serivce market place.
Regards,
Lokesh.
Edited by: Lokesh Tarey on Apr 15, 2010 2:31 PM
Edited by: Lokesh Tarey on Apr 15, 2010 2:33 PM

Error in number range while testing inbound idoc via we19

hi all,
i have done all configurations but while testing the inbound idoc via we19 i am getting an error 'error in assigning number to idoc'..i checked and found that the number range object for idoc is edidoc in it number interval is defined from 1 to 99
i dont think that anything is wrong with the number object..
Can u tell me how dow i eliminate this error?

Increase Higher limit the reason is when you look at current idoc number ( This idoc number already exists ) ,it will not create new idoc number.
System will get the number from SNRO Based on IDOC Object.
Just look at EDIDC and see the current idoc number.
Simple example :
I have one number - 100 ,it is already exists in database,if i insert same record to the database ,did system will accept ?
Thanks
Seshu

Test IDOC inbound processing in WE19

Hello,
I want to test an inbound processing for an IDOC in WE19. I don't have any message so i enter 'via message type' in the initial screen.
Then i fill the segments/fields of the presented segments that i think are necessary and also some data in the 'Edit control record fields'.
But when i click on button 'Standard inbound' i receive the error message 'Initial recipient partner type'. Please note I don't fill any parameter in the control fields for receiver, but even if I enter a value in 'partner type' for receiver I got the same error. If I need to fill this parameter I don't know what should it contains.
Does anyone have an idea about what could be the reason of this error ?
Thanks is advance,
Paulo Sousa

Hello Paulo
Recently I implemented an ALE scenario where the sending and receiving logical system are the same.
Purchase orders are sent to SAP-XI which returns the IDoc to the same logical system als sales order IDoc.
Thus, our logical system has the ORDERS message type as outbound and inbound parameter. SAP-XI is the other receiving and sending logical system.
The easies way is the "Copy&Paste" approach. Look into your system for existing inbound IDocs and compare their control record with the one of your test IDoc.
Regards
Uwe

Testing Inbound IDoc via WE19...

Hi,
I am trying to learn IDOCs via WE19.
I just took a sample IDOC from WE02 and tried to test in WE19.
I am trying to understand what do we mean by following:
1) Process Inbound IDOC via file ?
2) Process Inbound IDOC via function module ?
Regards,
Rajesh,

Rajesh,
Go thru this link
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc

Testing IDOC WE19

Hi All
I want to use standard IDOC DELVRY03, how can I test this IDOC on we19, it asks for IDOC number.
Can any body expalin me how can I use this standard IDOC.
Actually for T-code VL03n when th Post goods issue is done, I want this IDOC to be generated.
So how can I proceed with that.
Thanks in advance.
Archana

Hi Archana,
I want to use standard IDOC DELVRY03, how can I test this IDOC on we19, it asks for IDOC number.
Can any body expalin me how can I use this standard IDOC.
Actually for T-code VL03n when th Post goods issue is done, I want this IDOC to be generated.
So how can I proceed with that.
DELVRY03 is the standard IDOC type. In Delivery transaction goto menu path
Extras ---> Delivery Output ---> Header
Here we need to mention the Output Type, Medium, Function and Partner.
The Medium should be A ( ALE ) or E ( EDI ) depending on the scenario.
This automatically triggers the IDOC when ever the Document is created.
Please check this link
IDOC question
Best regards,
raam

Test IDoc data posted into application document correctly

Hi,
I'm new to IDocs.
I need to test some inbound idocs if the data is correctly posted as Application document(PO).
But currently the partner profile is not set in the system.
When i tried to process the idoc using RBDAPP01 i'm getting the status as 'Error passing IDoc to Application'
Is it possible to process idoc by any other way for testing, to create PO and data is populated correclty in PO.
Thanks in advance,
poornima.

Hello,
You can go to the Transaction WE19 (Test Tool for IDoc) and select an Idoc based on the Idoc Type that you want to Test & Post. While Posting the IDoc from WE19, the Partner Profile Check will be ignored and it will not be a Fatal Error even if you've not maintained the Partner Profile for the Incoming IDoc.
Refer to the Following Link which contains Instructions about Testing an Inbound Interface using the Test Tool.
http://help.sap.com/saphelp_nw70/helpdata/en/dc/6b814443d711d1893e0000e8323c4f/frameset.htm
Hope it would be helpful.
Thanks and Regards,
Venkat Phani Prasad Konduri

Test idoc SALESORDER_CREATEFROMDAT201

i have run this test idoc as inbound idoc using we-19 transaction(test tool for idoc).. when im filling the data into the segments it is asking to enter shipt-to-party or sold-to-party details..but i cannot find these fields in any of the segments..so can any one solve this...can i know what are the mandatory segments in this idoc.
BASIC TYPE : SALESORDER_CREATEFROMDAT201
MESSAGE TYPE : SALESORDER_CREATEFROMDAT2

Hi,
I checked idoc definition in WE30 and could not find any segment defined as a mandatory segment.
Which function module are you using to process the idoc using WE19 test transaction?
KR Jaideep,

Debugging of otbound IDoc with we19

Hi Experts,
i am using we19 tcode to test outbound idoc
How to debug outbound iDoc using we19.
Thanks.

HI,
Below are the steps to be followed for debugging outbound IDOC.
1) Put the breakpoint in the FM
2) Goto the application document repeat the output and save.
3)Goto program RSNAST00 give the document number and execute.
Regards,
Sharath

How To Test Idoc To File Scenario in ID From Tools- Test Configuration

Hi All,
Can any body help me in step by step process including screenshots for testing Idoc to file scenario in integration directory from tools->test configuration.
My scenario is passing the PO Idoc data from R/3 into a file using XI.
i have processed the idoc from R/3 and now i went to sxmb_moni in XI system and took the payload xml data.
In ID I have navigated to test configuration from tools then i have provided the following information.
Sender Service : Business system of R/3 b'coz here R/3 is the sender.
Sender Interface : ORDERS.ORDERS6
Receiver Service : Business system of XI b'coz here XI receives the data and         places it into a file
In payload text box i have copied the xml code which i have taken from sxmb_moni and clicked the run button. then i got the following error:
Sender Agreement
Internal Error
                 HTTP connection to ABAP Runtime failed.
                 Error: 403 Forbidden
                 URL: http://bxdci.boewe.custservice.de:8093/sap/xi/simulation?sap-client=100
                 User: PIDIRUSER
Kindly look into it and correct me if iam wrong or is there any other way to test this scenario in ID please suggest.
Thanks & Regards,
Venkat

Hi Venkat,
Specify the test confisuration as follows.
<b>Sender</b>
Service   : Business System of SAP R/3 System
Interface : The outbound message interface name of type the IDOC.
Namespace : will automatically loaded when u select the Interface. Check if it the correct namespace.
<b>Receiver:</b>
Service : Business System name for the Fle system.
Paste the payload that u copied from the sxmb_moni.
Now click on Run and test ur Scenario.
Was the scenario sucessfull in the Message Monitor.
Regards
Santhosh

How to Correct and Re-send new idoc # in WE19

Hi Expert
Can you please give me the steps to correct and re-send (new idoc) in WE19.
Here is the situation:
Outbound ASN failed in EDI for having special char in field ARKTX(E1EDK08-E1EDP07-E1EDP09-ARKTX).
Here I just need to remove special character from the material description. I found the value where i need to make changes but from that point I don't know where to go in the screen to save that change and generate new idoc #.
Please provide steps...
Thanks in advance for you help !
Thanks,
Darshak

Hi
As suggested by Jurgen you need to follow the same step, i am just adding the screenshot to make it more visual
Step 1
Step 2
Step 3
STEP 4
Remember you can make the change only for the failed idoc,if you will try to follow the above process for the IDoc which are in 53 /03 status system won't allow to make the change

How to send multiple idocs from WE19?

How to send 100 IDocs at a time using We19?
in other words, can we generate 100 IDocs from a single Idoc using We19
Thanks,
Ven

Hi Venkat,
Check program RSEOUT00.
Hope this helps.
Regards
Lakshman

Quick Checkin or Alternate to Testing iDoc

Hello, I am building some admin pages that will reside within Content Server, right now my process is to develop the pages locally then check into CS, but each time I make a change I need to check out and check in this takes tooo long, is there a faster way to Checkin/Update the file in the CS?
Also is there another tool that I can test iDoc in? It would be nice if there was a extension to Dreamweaver or something similar where I can test iDoc without having to check a file into CS.
Ideally I would love to develop a HCSP in say Dreamweaver, it can contain iDoc etc.. and I can do a preview and see the out put. Then when I am staified then go Check into CS.
Thank you...

I once found a tool that seemed nice, althought never got to try it out.
It´s an interface to develop IDoC.
http://contentoncontentmanagement.com/2007/11/07/idoc-developer-interface-for-stellent-oracle-content-server/idoc-developer-interface/?PHPSESSID=07a861a3186c3e1687065e4d5e348f9f
Regards

Testing orders05 idoc in we19 and populating E1EDK14 segment

Experts
I am trying to test the orders message in we19.
I am inputting all the values for the segment fields.
But probelm comming while populating the E1EDK14 .
We need to input the sales area , sales doc type in this.
Here it shows two fields to input one is qualifer and other orgid.
In quarlifer it is taking only one value if i am trying to input other it is overriding.
Example i am inputting 006 and again i am trying to input 007 but 006 is overriden by 007.
If this is the case then how can i tell to the system which is sales org , which isdistribution channel, which is division etc.
help please.

Hey there
'If this is the case then how can i tell to the system which is sales org , which isdistribution channel, which is division etc.'
You need to distinquish with the help of qualifers field in the segment ie 006,007,008,012,017 etc and it depends on what type of data we are feeding.
'Here it shows two fields to input one is qualifer and other orgid.'
Yes E1EDK14 has two fields only ie QUALF & ORGID.
"In quarlifer it is taking only one value if i am trying to input other it is overriding."
As per my understanding from your concern I hope you are trying to input in the single segment all the values of header data , this is wrong.
For this you need to create another segment below the present one.
Simply press the create icon (F5) , you will get another E1EDK14 segment , and do the same as per your need.
So finally you will be having like this....
E1EDK01
E1EDK14 006DIVISION
E1EDK14 007DC
E1EDK14 008SORG
ELEDK14 012ORDTYPE
E1EDK05
and so on ..
Let me know if you still face any problem in this case, Happy to help you.
Best Regards,
Vvieks
"Grow and help others to grow"

Getting error code 37 while sending IDOC via WE19

Hello experts,
I am facing a very unlikely error which is preventing me from testing my scenario.
I dont have XI quality server and hence I am using my development server as both dev and quality. Hence I need to connect both dev and quality SAP R/3 system to my XI dev system. While I have done all the configurations in my XI and both SAP R/3 systems, its giving me error when i am trying to send IDOC from quality system.
In quality R/3 i have done the following:
1) Created RFC for my XI dev server
2) Created port for this RFC
3) Created partner profile adding all required IDOCS in the outbound parameters
4) Created distribution channel for all the idocs
In XI dev system i have done the following:
1) Created RFC for both dev and quality of R/3
2) Created port for both the RFCs
3) Maintained the IDOC metadata for both the ports
Now when I am pusing IDOC via dev of r/3 (we19) is working fine but when I am doing the same from quality of r/3 its giving me status code of idoc as 37 that says "An error was identified in the control record while adding an IDoc. The sender port SAPQTY_510 is invalid."
But I have created this sender port SAPQTY_510 in my XI dev system and have also maintained the idoc metadata. I dont know why this error is coming.
Can anyone please point out what mistake i have done or if i missed sometig as I am trying to connect 2 r/3 systems to one XI system.
Its really urgent hence your help will be highly apreciated.
Thanks,
Yash

hi yash,
where you created SAPQTY_510 ,it should be created in R/3 Quality RFC destinations.
In XI DEV create port like SAPxxx WHERE xxx is SID of quality system.
actually we are getting confused.
i guess you used same name SAPQTY_510 in quality R/3 and XI DEV .
In error it says sender port SAPQTY_510 is invalid mean port of Source not XI DEV(receiver).
just try to use some other name say SAPXXX_QUA and confirm the error.
when IDOC is sent to XI DEV ,port of XIDEV SAPQTY_510 has nothing to play any role .
just check whether rfc destination of sender port (QUALITY R/3)you used is of type 3.
so please check at which port error is coming.
Thanks & Regards,
Rama Krishna
Edited by: rama krishna talluri on Mar 5, 2008 10:02 AM

Testing IDOC in we19

Similar Messages

Maybe you are looking for