Testing Objects in Integration Directory

Hi All,
How can we test our configuration directory objects? I cant see any test configuration option under tools menu.
Regards
rahul

Rahul
If we have SP less than 12 you dont have this option. Also you can go through this Service Notes: 919387, 858049.
Also some of the fixes done in SP 12 can be found in 617390.
---Mohan

Similar Messages

Why I can't delete an object from Integration Directory?

Hi!
I want to delete one object from ID(Integration Directory) or IR
(Integration Repository). But the delete button (either the trash can
or the "delete" menu item) is disabled.
I get sap_all and all wanted roles. But I still have this issue.
Please help. Points will be given.

Lee,
If you want to delete a namespace you cannot delete until unless all the objects inside the namespace are deleted. If you want to delete any object in ID then right click on it and press Delete.
Go through this weblog where it shows how to delete namespace:
/people/sameer.shadab/blog/2005/12/05/how-to-remove-namespaces-in-mapping--xi
---Satish

Testing Configuration in Integration Directory

Hi Friends,
I want to know , If I use the test configuration in ID, by providing sender,receiver and payload, will the message be posted to system? I mean my scenario is of creating Idoc from xi message, so if I test the configuration in ID, will it post the IDoc to my system?? or wll just show that mapping is done properly or not.
Thanks,
Brij.....

Hi,
If I use the test configuration in ID, by providing sender,receiver and payload, will the message be posted to system? - No the msg will not be posted in target system.......
it just shows the mapping output of your incoming msg and whether your configuration is okay or not............
Regards,
Rajeev Gupta
Edited by: RAJEEV GUPTA on Feb 9, 2009 3:18 PM

Unable to Delete PI Integration Directory Objects

Hello Experts,
We are facing a strange problem in our system. When we wanted to delete some unwanted objects from Integration Directory from my user, I can't see any more in Object View, however can see in Change List with some X (red) mark before the object.
These objects are still remain and visible to other users in the respective scenarios.
When we try to delete from there, a confirmation pop-up dialog appears stating that data/object will be lost, when confirm (it says it is deleted) but remains in the change list.
We have verified in the object locked list, but there also nothing was locked.
Regards, Alex.

Hi,
You need to activate the change list where the deleted objects are present for the deletion to reflect in the runtime cache.
Also, if these deleted objects have been transported to higher environments, you would need to transport the deleted objects for the deletion to reflect in the higher environments as well.
To do this, when creating the transport, keep the check box "Include deleted objects checked". Then you can select the deleted objects to be included in your transported (deleted objects would be indicated with a bin icon).
Regards

Activation impossible in Integration Directory

Hello,
I've got a problem when i try to activate objects in Integration Directory :
Activation of the change list canceled Check result for Communication Channel | BS_JDBC | CC_BILLETIQUE_ORACLE: Attempt to access application REPOSITORY using Http Method Invocation (HMI) failed. Detailed information: Invoking ROA method "ReadObjects" via HMI ... FAILED due to following exception: Message: Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://xxsaps99:50400/rep/remoteobjectaccess/int?container=ejb" with user "PIDIRUSER". Response code is 401, response message is "Unauthorized" Stacktrace: com.sap.aii.utilxi.hmi.api.HmiCoreException: Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://xxsaps99:50400/rep/remoteobjectaccess/int?container=ejb" with user "PIDIRUSER". Response code is 401, response message is "Unauthorized" at com.sap.aii.utilxi.hmi.api.HmiCoreException.newCommunicationError(HmiCoreException.java:83) at com.sap.aii.utilxi.hmi.api.HmiHttpClientImpl.sendRequestAndReceiveResponseViaHttp(HmiHttpClientImpl.java:181) at com.sap.aii.utilxi.hmi.api.HmiHttpClientImpl.sendRequestAndReceiveResponse(HmiHttpClientImpl.java:92) at com.sap.aii.utilxi.hmi.api.HmiClientAdapter.invokeMethod(HmiClientAdapter.java:88) at com.sap.aii.ib.core.roa.RoaServiceImpl.readObjectsImpl(RoaServiceImpl.java:198) at com.sap.aii.ib.core.roa.RoaServiceImpl.readObjects(RoaServiceImpl.java:329) at com.sap.aii.ib.server.cpa.AdapterMDCache.readObject(AdapterMDCache.java:219) at com.sap.aii.ib.server.cpa.AdapterMDCache.actualize(AdapterMDCache.java:209) at com.sap.aii.utilxi.misc.api.LRUMapBasedCache.get(LRUMapBasedCache.java:34) at com.sap.aii.ib.server.cpa.AdapterMDCache.get(AdapterMDCache.java:171) at com.sap.aii.utilxi.misc.api.Cache.get(Cache.java:40) at com.sap.aii.utilxi.misc.api.Cache.get(Cache.java:40) at com.sap.aii.ib.server.cpa.AdapterMetadataUtil.getMetadataParser(AdapterMetadataUtil.java:17) at com.sap.aii.ibdir.server.check.CPACheck.checkChannelXml(CPACheck.java:18) at com.sap.aii.ibdir.server.check.InternalCheckServiceChannel.checkObject(InternalCheckServiceChannel.java:83) at com.sap.aii.ib.core.check.CheckServiceProvider$CheckServiceImpl.checkObject(CheckServiceProvider.java:98) at com.sap.aii.ib.server.oa.ServerObjectAccess.checkBeforeIntegrate(ServerObjectAccess.java:2205) at com.sap.aii.ib.server.clmgmt.ChangeListMgmtImpl.releaseChangeList(ChangeListMgmtImpl.java:767) at com.sap.aii.ib.server.clmgmt.ChangeListMgmtImpl.submitChangeList(ChangeListMgmtImpl.java:217) at com.sap.aii.ib.server.clmgmt.ChangeListMgmt.submitChangeList(ChangeListMgmt.java:132) at com.sap.aii.ib.server.clmgmt.ChangeListMgmt.submitChangeList(ChangeListMgmt.java:124) at com.sap.aii.ib.sbeans.clmgmt.ChangeListMgmtBean.submitChangeList(ChangeListMgmtBean.java:92) at com.sap.aii.ib.sbeans.clmgmt.ChangeListMgmtRemoteObjectImpl10.submitChangeList(ChangeListMgmtRemoteObjectImpl10.java:435) at com.sap.aii.ib.sbeans.clmgmt.ChangeListMgmtRemoteObjectImpl10p4_Skel.dispatch(ChangeListMgmtRemoteObjectImpl10p4_Skel.java:343) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:309) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:194) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I tried some solutions that are in the sap forums, but none are helpful.
What can I do?
Thanks in advance for your answers.

Lejeune,

Response code is 401 says that there is some problem in your userid or password. Please verify them whether they have changed or the user is locked in SU01.
Also try to use any other service userid and password and check whether you have the same error or not?
Regards,
---Satish

No authorization in Integration Directory

Hello
We are trying to create Scenario objects inside Integration Directory but it is giving No authorization error. we are using XISUPER as the user.
we could develop mappings inside IR.
Thanks in advance
Regards
Rajeev

Hey,
Relevant problem is with the roles assigned to XISUPER. As said above call the transaction su01 -> Enter User Name -> choose Display-> Select ROLES tab.
Check Wether u have the role assigned .
1) SAP_XI_DEVELOPER
2) SAP_XI_DEVELOPER_ABAP
3) SAP_XI_DEVELOPER_J2EE
If they aren't assigned assign them or else ask ur basis admin to do it. It should resolve the problem.
Cheers
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

Problem in Integration directory

I created a new object in integration directory.There is an option called to transfer integration scenario from integration repository.But i am not able to do it because my scenario does not appear in the menu.I activated my namespace in Integration repository.Can you please tell me the procedure to do it?

Hi,
You have to create a scenario by right click on Integration Scenario you have to map the flow source to adapter and adapter to target. After completion of all the things you upload it into ID.
Thanks,
RamuV

Integration Directory APIs in PI7.1

hi,
I am trying to read/access the content (objects) of integration directory using the APIs.
this feature is available in PI7.1.
I saw the documenation
[http://help.sap.com/saphelp_nwpi71/helpdata/en/46/6ef92455d66a58e10000000a11466f/content.htm]
and
[http://help.sap.com/saphelp_nwpi71/helpdata/en/46/6dca42e5c269dfe10000000a11466f/content.htm]
It says:
Open the external definition CommunicationPartyService in the software component version SAP BASIS 7.00 in the namespace http//sap.com/xi/XI/System
In the navigation area expand the node SAP BASIS u2192 SAP BASIS 7.00 u2192 http://sap.com/xi/XI/System u2192 External Definitions.
In my ESR, i can see the namespace http//sap.com/xi/XI/System under swcv SAP BASIS, but the external definition CommunicationPartyService is not present.
Has anyone tried accessing the ID objects thru APIs. would it be possible to access without the CommunicationPartyService external definition.
any comments appreciated.
thanks,
Ganesh

the blogs
Directory API Development - Part 1 of 3
Directory API Development - Part 2 of 3
Directory API Development - Part 3 of 3
were helpful.

Integration Directory | Choose Adapter Metadata - No objects found!

Hi friends.
I'm new in XI and I wanted to test some simple scenarios. At the beginning I had a problem with the SLD. We made some post-installation steps and everything was allright. Thus my problem is now: In the Integration Directory I try to create a communication channel - I choose Scenario->Service Without Party -> Business System -> <myBusinessSystem> -> Communication Channel and do a right click on it. I choose NEW and create a new communication channel. But when I use display input help for Adapter Type, it is loading for a while but the list of Adapter engines is empty and there is written - No objects found!. I didn't install XI on our machines and I don't know which installation / post installation steps were done. Adapter Engine in integration server is installed for sure. I looked for some threads on the forum, but I didn't find nothing more specific for my problem. Probably I need to set up something somewhere to obtain a list of adapters for the communication channel. Any help will be rewarded.
Thanks
Ondrej

Ondrej,
You need to import SAP BASIS Software Component Version into Integration Repository.
You need to download it from service market place.
https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
In Search Term Enter "SAP BASIS <version>".
Then put this in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
Now in IR, TOOLS ---> Import design objects and import it.
After import you should be able to see the namespace under it.
Regards,
Sarvesh

How to add buisness system in Integration directory -objects

Hi All,
I created the technical systems and buisness systems. then in the integration directory, i want to check whether my business system exixts are not.
so in the integration directory,
objects--->service without party >buisness system>
in the buisness system , whatever buisness system i created the is not found.
how to add buisness system into integration directory -- objects.
Regards,
vinoth.

Hi,
go to integration directory,
objects--->service without party >buisness system>
select the BS -> Right click the BS -> it show the number of BS select your business system and assign them next save.
If the your business system if it's not appear go to Environment menu -> Clear SLD Data cahce.
and do the same process again..
Regards,
Venu.

Integration directory - Editing Objects

Hi all,
I want to change the naming convention of some objects like configuration scenario name,party name,business service name etc in the Integration directory.
For Eg:- If I try to change the configuration scenario name.
DblClick the "Configuration scenario name"
But when I try to change it by using "Display/Edit"- the "Configuration Scenario" field is not editable.
The "Description" field is editable.
Is it something to do with my rights in the system.Should I talk to my administrator.
OR
If not, How could I change it...
Thanks
P

So if there are 2 party or business servives or integration processes with the same name(added as I aid before using "Add to Scenario") exists in 2 different scenarios.They are independent objects.
So I can rename each object also as independent objects as follows,without worrying abt "Where-used"lists.
Right click ->Copy object->Give the new name->Select the scenario(and folder if you using one)->Save and activate.
A li'l correction here. You cant have two different business services/components with same name in the first place. All Business sytems/services are stored in a common place thats under the Service without party tab in Integration Directory.
Channels assigned to Business system is stored in SLD.Thats clear.
Channels assigned to business services.Its also reused.If it is reused it should be stored in a common place right.Where is it?
When you create a channel BY DEFAULT they get stored in Communication Channel tab in ID and if you check the Service without party tab in ID you can find the same under your business service/component.
So if there exists 2 channels with the same name(added as I aid before using "Add to Scenario") exists in 2 different scenarios.They are independent objects.
So I can rename each channel also as independent objects as follows,without worrying abt "Where-used"lists.
Yes!!!
Your channels are assigned to a particular business system/service. Now when you rename them using copy object you have the option to select a business system too. If you want them to be in the same business system/component just give the new name and save.No need to worry about scenarios.

Error while importing the Integration Directory Objects

Hi,
I created one simple RFC to RFC scenario.We have only one XI system. after creation of this scenario I exported the Scenario from Integration Directory. Then I deleted the configuration scenario from Integration directory. Now I tried to import the TPZ file which was generated before the deletion of the objects in the integration directory. I get following error :
"No business system found on the application server (XXXXXXX, 00) for client 001"
XXXXXXX is our XI server.
Now if I create the Business system for client 001 in SLD for XI system and tried to import the TPZ file again, it works.
What could be the reason for this? Also Please let me know if I have to do any configuration before importing the TPZ file in same the same system to avoid the above error.
Highly Appreciate your valuable inputs.
Thanks,
Chandravadan

Hi Swarup,
Thanks for reply.
As you suggested, I did the SLD cache refresh and also whole cache refresh. But Still I get the above error. and if I create the business system for 001 client of XI system then it works.
My doubt is why I get error only for 001 client. There are also clients in XI system. and I have business system for client 600 of XI system as Integration server.
Thanks,
Chandravadan

List of unnassigned objects in the integration directory

Hi! Hope this is an easy question. Does anyone know of a way to get a list of all objects - party, service, rec det etc... - that are not assigned to a Config Scenario in the integration directory. Need to do a cleanup and wants to avoid going object by object to get the list. Thx, Duncan

Thanks for the replies. The objects tab shows me all objects. I need to see only those not assigned to a CS. How can I do that there?
The where used option requires me to go trhough every object (1000+) and check one by one. That is what I am trying to avoid.
Ideas? Thx, Duncan

Unable to activate PI - Integration Directory Objects

Hi Guys,
i am unable to activate PI - Integration Directory Objects.
when i'm trying to activate its taking too much time,then no response.
can any one pls help me on how to resolve this issue.
Thanks,
Siva.

Hi Siva,
Check with your basis guys.
In most cases, this is due to memory overflow error. They should free the memory which some interface or logs is holding up.
Most of these problems are solved by simply restart of the server.
I strongly suspect that some log file might be growing which would have consumed all memory.
Regards
Krish.

Problem restricting Integration Directory object access

Hi All,
We are trying to restrict access to a group of objects in the Integration directory. In the tab "Party" i select the option as follows:
Selection Paths -
Operator - Include, Party - Service without party, Service - BSR_TEST
Objects -
Operator - Include , Type = *, Action - Change
However, this role when assigned to the user allows create and delete option as well. Also, if any other role is assigned to the user and then revoked, the restriction does not work (the role mentioned above gives an Insufficient authorization error even for the objects it is set to permit)
Our XI system version is 7.0 with SP level 17.
Thanks in advance for your inputs
Vijaya

Hi Abhishek,
Thanks again for your response. However any ideas as to why the role would stop working f user settings are changed?
Also, when i select the service using option - single selection and select multiple checkboxes (even 2) it does not work, where as if i add 2 rows with one value it is ok.
Let me know if i am missing something
Thanks
Vijaya

Testing Objects in Integration Directory

Similar Messages

Maybe you are looking for